Transcripts
1. Introduction : Hello, everyone. I'm Uni
and into this class, we'll drop the
Mushroom characters. This class doesn't require any prior experience
or fancy tools. We'll start from
scratch and we'll be using simple techniques
throughout the process. Everything you'll see will
be happening in Procrit. However, if you have a software or want to try
traditional materials, you're welcome to join. If you are ready to start,
let's jump right into it.
2. Basic Scheme: Let's begin our class firstly by deciding what kind of canvas
we are going to be in. Today, we're using a standard, simple, square canvas that
you can find in Procreate, our both pixel width
and pixel hide are set at 2048 pixels. If you would like to use any other dimensions free canvas, just go for it. DPI 300 and our color profile is set as SRGB weigh
this low number. When it's all done, let it do, we will be redirected
to our new canvas. Let zoom out our canvas, so we will see the whole canvas, and then we will need
to decide what kind of colors we're going to be using throughout the whole class. If you want, you can
pick your own colors, but if you want to
follow along and use the same colors that you will
see throughout the class, please go to the
project and recess up and download
all the materials. When you did it, the first
network we need to do into our illustration is to change the color of our background. Let us go to our layers, and we will go to our
background color layer. On the bottom, you can see we have our color
palette, but for us, it will be easier to go under palettes right here
on the bottom right, and here go under cards. Here we have all the
colors names and it will be easier for us to
navigate through them. The first thing
that we are doing is selecting our
background color, and we've changed the
color of our background. The next thing that we
will need to do is to go and pick the brush
for our sketch. Let's just go to
our brush library, and we'll go to the
sketch and folder. You can select any brush
that you like here. You can try it onto a canvas. If you don't like it, get
back to the brush library, select another brush and
find what works for you. When you found the brush,
let's just go again to our color palettes will
go under cards here too, and we will select our
dark sea and blue color. With this color, we will first go and start creating
a little scheme. Firstly, let's just go somewhere in the
middle of our canvas. Actually, it doesn't matter
where we go right now. We just need to go and create
a shape of the circle. With one line, let just create a shape and at the
end, we will hold it. You can make sure that you
are making it bigger or smaller by moving your apple
pencil from side to side. For now, let's just go
with something like that. When you have the
size that you like, let's just lift up
our Apple pencil and we will go over the top to this option that pops up that is now called ellipse.
We will go there. It is our editing mode, and here on the top, we will
choose the option circle. Now we have a perfectly
round circle, and we just need to go away
from our editing mode. Let's just step on the
screen either with one of our fingers or
with our Apple pencil. When we have this first element, let's go again to our layers and we will create one
more layer on top. When we did it, we will go over the top part of
our first element, and we'll create another shape and this time it will be an ps. The same way as before, just creating a shape and
holding it at the end. Make it as big as you like. This is our cap of the mushroom. For now, let's just go
with something like that. Again, we will go over our
top to the editing mode. Let's try to position
it right in the middle. So we have equal
space on both sides. If you want to position
it more horizontally, we can just go to
one of the nodes. For example, to one node
that we have on the top, we can hold our Apple
pencil there and we can move it and find
a placement of our. If you want to adjust
something else, for example, you have different
space right here on the letter and on the right
and you want it to be equal. You can go to the node on one of the sides and do the same
thing as we did on top. We can just move it a little
bit more toward the center, so we have enough space on
both sides and it is equal. Now when we have
something like that, let's just drag it a
little bit higher. To do that, we will need to
hold our apple pencil at some blink space and just move our element to the place
that we want it to be. For example, let's just go
with something like that, and when we have the
result like that, let's just step on the screen to get away from our editing mode. Now, let's just go and
put all of our elements, both of them a little bit lower, so we will have a
bit of space on the top so we can add
more details here. To do that, we will need
to go again to our layers, and when we have
one layer selected, we will go to our next layer, and we will swipe it
from left to right. Now, two layers are selected, and we will go to our
okey on the top left. On the bottom, we are
using uniform methods, and you can see we have
this bounding box. Let's just go to
some blink space. Let's just hold our
Apple pencil and let's just find the
place for this elements. So for now, let's position
it in something like that. And when you have the
result like that, let's just deselect everything
by heating our arrow key. Now, when we have
these two elements and when we position them
onto our canvas, let's again go to our las
and create one more layer. Firstly, let's just
deselect what we have here. We will tap on one
of the layers, and then we will just
tap on the plus icon. When we did it, we will
go to our new layer. Firstly, let's just
go over the top of our first circle and we'll
create a little curve there. So just going there and
creating a curve on the top and trying to make it parallel to this line that we have
on the top of our ps. If we need to adjust it, we are going over the top to our editing mode
and adjusting it. You can vary the position
on these elements, take a look at
everything here and decide where you want this
little elements to be. When you are satisfied
with everything here, let's just tap on the screen to get away from our editing mode, and then again, we will go to our lis and create one
more layer on top. Now, we will go to one of
the sides of the ellipse, and we will go with
a b curve like that. We are going to the
opposite side and we are connecting our new shape
with our previous one. If you need to adjust it, going over the top
to our editing mode. Find the position
and the size of the element and the courage of this line that
you would like. When you're satisfied, let just get away from
our edit mode. Now, let's just take a look at everything here
and decide whether we want to move our top
part a little bit down. To do that, we can just
go to our layers and select all the layers except
our layer with the circle. Again, we are selecting
these three layers on top, and then we are going
to our arrow key. Let's just move it
down a little bit, and when you are satisfied with the placement
on the elements, let's deselect everything
by hitting our arrow key. Now, let's just go and erase all the lines
that we don't need. Firstly, let's just go to our layers and we will go to
our layer with the circle. We will go and grab our eraser and we will erase the top part. When you did it, we will
get back to our layers, and we will go to our
layer with an ellipse. We will go again
to our eraser and we will erase this line
that we have in the back. Now when we have the
result like that, let's just get back
to our less and we will combine all
these layers together. To do that, you can go
to one of the layer that you have on the
top and put one finger there and one finger
you will put on the layer that you
have on the bottom and you will make
a pinch movement. Or you can do it manually
by going to the top layer, tapping on it, and
select and merge down. We'll do it a few
more times until we have only one layer with
all of our elements. Now, when we have the
result like that, let's just take a look at it and decide whether we want
to adjust it or not. For example, we can squish it a little bit to
make it more acute. When we have this
layer selected, we will go to our
key one more time, and on the bottom, we will
go to our option free form. When we have this
option selected, we will go to this node that we have in the middle on the top, and we will just hold our apple pencil there
and we will drag it down. For example, let's just go
with something like that, and then we will
just go again to our key and we will deselect
everything by heating on it. When we have the
result like that, let's just go to our next part, where we'll be
adjusting the sheep and creating the sketches
for our characters.
3. Cheerful Mushroom Sketch: Begin this fight firstly
by going to our layers, and we will go to
this layer that we have right now and we
will rename it as scheme. Let's just tap on the screen and choose rename from the list. Now, when we did it, let's just make a copy on this layer, so we will swit this
layer from right to left and we will
choose duplicate. Just for now, we will go to
this first layer and we will hide it because we will
use it later on again. Let's just go to this
little check mark right here and we will tap on
it to hide this layer. Then we will just go to
this layer that we have on top and we will
go to our arrow key. We'll use uniform method, and we will make this element
a little bit smaller. For example, let's just
go to this node that we have on the bottom right
and we will drag it up. Find the size that you
like, and when you have it, let's just move
this element more toward the left and the top. For example, let's just go
with something like that. If you want to rotate it, you're welcome to
go and do that. For example, let's just go to this green note over the top. We will hold our
apple pencil there and we will make a
rotational movement. Find the placement and the
rotation that you like, and when you have what you like, if you don't want to
adjust it anymore, we will go to our key and we
will deselect everything. If you want to adjust it, you can go to the
free form method, and for example, maybe make
it a little bit more open. When you have the
result that you like, let's deselect everything
by hitting our arrow key. Now, when we have
something like that, let's just go again
to our brush, and let's start
adding some details. Firstly, let's just go
over the top to this cap, and let's create a
few elements here. Let's just go and create the
additional lines like that. We will go later and
we will recover them. Let's just go and
add a few of them of different size and different
placement of these elements. When you have
something like that, let's just go and start
adding some legs. For example, let's just
go over the bottom. We will go and find the
center of this element. We will make a little
mark down like that. When we have it, we will go
to the sides from it and we will start by creating
two lines going in that way. Of course, if you would
like to experiment and find a different
placement for your legs, you're welcome to
go and do that. Firstly, when we have
these two lines, let's just go over the
left side firstly, and we will go and add the
thickness to this little line. We will step a bit to
the right and we will create another line
going down in that way. You can make these two lines
parallel to one another, or you can just
make them a little bit more wide on the bottom. When we have these on our left, let's just do the
same on our right. Again, going a little
bit more toward the center and creating a
line going down in that way. When you have
something like that, let's just go to the bottom, firstly, again, let's just
go over our left side. We will go and create a little element like
that on the bottom, and then we'll create
a horizontal line going toward the center, and we will connect
it with our line that we have going on
a vertical axis. When we have this, let's just go over our right and do
the same thing here. You can go and make sure that you are doing
it on one line. If you need to
elongate the legs, you are welcome to
go and do that. Again, we are starting
with this little element on the side and then creating a horizontal line like that and connecting it
with our main shape. When we have our legs, let's just go and
create a little arms. Firstly, let's just
go over our left, we go a little bit lower. Then we have our intersection
between the shapes, and we will just create
a curve like that. When we have this
curve will go over our right side and create a
curve going up in that way. If you want to experiment
and create different arms, you are welcome to
go and do that. Now again, we will go and
create the thickness. Firstly, we are
stepping a bit from this first curve
and then just go in there and creating
something in that way. In the end, we will connect our shape very nicely
with a smooth curve. When we have
something like that, we'll go to the opposite side and create something
similar here. Try to make the thickness of the element similar
on both sides. When we have these arms, let's just go and
add just one finger. We will go over our
left side firstly, we'll go to the right side of this element and we will create a little element like that. When we have it
on the first arm, let's just go to
the opposite side and create something
similar here. Go on top and creating a
little element like that. When we have
something like that, let's just go and add
the facial features. Firstly, if you need to, we can just go and create
a cross like that, so it will show us the approximate center
on this element. When we have it, we will
go a little bit higher than our line that we have
on the horizontal axis, and we will start by
creating a little. Let's just go and create a shape on the circle
somewhere here. Of course, you can just go and adjust the size
of this element. You can adjust the
placement of it. You can adjust the distance from the center.
It's all up to you. When you have the first eye, let's just go to
the opposite side and create something
similar here. Again, we are trying to put it on the same line and
we are trying to keep the distance
from the center similar to what we
have on our left. When we have the second eye, let's just go right
between them, and we will create a little
smiley mouth like that. Of course, if you would like to experiment with facial features, you are welcome to
go and do that. When we have these eyes and
when we have our mouth, let's just go above the eye and let's create a
little brows like that. Again, if you want to
experiment with something here, you are welcome to
go and do that. When we have facial features, let's just go
underneath our eyes, and let's create little
elements for the cheeks. You can go with the shapes of the psis or just with circles. When we have
something like that, let's just zoom out our canvas and see how everything looks. When we have everything done, let's just go again
to our arrow key, and we will use uniform
method and we will make this whole character
a little bit smaller. Again, going into one of
the corners and dragging it up or down depending
on the corner. When you have
something like that, when you have the
result that you like, let's just go and deselect everything by hitting
our arrow key. And when we have our
first character, let's move on to our next part. We'll create the second one.
4. Flower Mushroom Sketch: Let's begin this part firstly by going to our layers and again, we will make a copy on this
layer with the scheme. So let's just go there and swipe our layer from right to
left and choose duplicate. Also, you can just go to
this first mushroom that you have created and rename
it as cheerful mushroom. So let's just stop
on this layer. Let's choose rename and
give it a different name. And then let just get
back to the copy that we have created and let's
unhide this layer. When it is selected,
one more time, we will go to our key. We'll use uniform method and we will make this whole
shape smaller. You can try to
keep the same size that you have right here on
your left or if you want, you can just go and experiment with the size of this element. Also, let's move
it to our right, and let's just find
the placement for it. If you want to rotate it, you are welcome to
go and ratate it. In that case, let's just go
with something like that. If you want to adjust
the shape even more, you can go under free form
and adjust it from here. When you have the
result like that, let's just go to our arrow key and we will
deselect everything. Now, let's just go
and start working on our little elements here. Again, we are getting
back to our brush, and we will go over the
top and we will start creating these
additional elements on the cap of our mushroom. You can go and repeat what you have right here on your left or if you want you
can experiment and create something
different here. Very easily, let's just
go and create a few on these half circles or half epses and add some
beautifications to our cap. When you are done, let's move
on to the bottom and let's start creating our little
legs and our little arms. For this character, let's just go with something
in that way. We will go a little bit down. Again, we will start by finding the center of this shape by
making a little mark down. From this mark
down, we will go to the right and we will create
a shape going in that way. Firstly, let's just go
with a curve like that, and we will go more
toward the right, so it will be our
little leg here. When we have it, we will go
and add some thickness to it. We are going again to
the top and we are just repeating the same
curve that we have here. If it's not happening
from the first right, try out one more time. When you have
something like that, we will go to this
bottom part of our leg, which is now horizontal, and we will again create
a little line like that, and we will connect it with
the whole shape of our leg. If you want to, you can
work more on the sheep. If you want, you can just go and erase some parts
that you don't need. It's all up to you. You can make this curve on the
left very curvy, or if you want to, you can
play around with this line. Now, when we have
something in that way, let's just go and
add the second leg. When we have this leg, we will go a little bit
more toward the left and we will create a little
line going up in that way. Now, when we have
something like that, if we have the lines that
we want to adjust or ease, we will go to eraser
and adjust it. Now when we have these
little elements, we will go to this
leg that we have on our right that
is already done, and we will go a
little bit higher from our center and we will create
a little element like that. If you want to work more on the sheap you're welcome
to go and do that. If you want to move
these elements, a little bit more toward
the right or to the left, let's just go and do that. To do that, we will need to
go to our S ribbon icon, and here on the bottom, we will use free hands methods. Now, very accurately,
we will go and select only the element
that we would like to move. Let's just go around loop the sheap and select
only our legs. When we did it, we will go
to our er key one more time, and now you see we
have our bounding box. Now we can easily go and move this element somewhere
where we want it to be. If we want to rotate
it, we will go to our green nodes
and rotate it. Just spend some time here and
this shape to our lichen. If you want to make it smaller, you can just go to one of
the nodes, for example, to this node that we
have in the center on our right and make this
whole element smaller. Please run with this element, find what works for you. When you're satisfied with it, let's just go and
deselect everything by hitting on the first
icon that we were using, and it was our S ribbon icon. Now, when we've de
selected everything, if you have some elements
that you would like to erase. Let's just go grab our eraser
and erase these parts. Now, when we are done, let's just get back
to our brush and let's go and add little arms. Firstly, we will go
over our left and we will go a little
bit to our left. If you want to, you
can go and make a little markdown some way here. When you have this mark down, let's just go with little
line going in that way, and then we will go more toward the right and we will
create another arm here. You can go and overlap the leg
that you have in the back. Let's just go with
something in that way. When you have the
result like that, let's just go and
add some thickness. Firstly, we are going toward
the left side and we will go more toward the center and add the line going in that way. When you have it on your left, let's just go to the right
and do the same thing here. Again, you can make these
lines parallel to one another, or you can make them a little
bit wider on the bota. When you have the
result like that, let's just go firstly
over our left side, we will go and create a
line going in that way. Okay. Connected nicely with
the whole sap on the arm. When you have something
like that, let's just go and add a little
finger right here. Again, connect it
nicely with your sap. If you want to
adjust it even more, you are welcome to
go and do that. When you have the first arm, let's just do the
same on our right. Again, let's just go and create a curve
going in that way. Go on in the opposite direction, and then we will go and create
a little finger like that. Work more in the shap, if you need to and if you have some elements that
you need to erase, let just go grab our eraser and erase the parts
that we don't need. Again, if you want to
adjust these elements or if you want to make
them smaller or bigger, we can do it in a different
way, for example. Let's just go to
our magic quanto, and we'll go under liquefy. Here on the bottom, we
have a lot of options. All that we need to select
is our push option, and we are not touching any slider except our
slider with the sides. Let's just go and adjust
the size of our brush. Let's zoom out our canvas, and if you want to
adjust some parts, let's just go and push them. For example, let's
just work a little bit more onto our arms and let's just make them
a little bit smaller and maybe position them a
little bit differently. Spend some time here and
find what works for you. If you want to adjust
other elements, you are welcome to
go and do that. You can go to the legs
and work on them, too. When you're satisfied
with everything here, let's just go and tap twice
onto our magic one tool, and then we will get
back to our brush. When we did it, let's just go
and create facial features. Again, we will start by going to our middle part and we will start by creating a little
cross if you need to. When we have this cross, let's just go and create the first eye over
our left side. This time, let's
just go again above this line that we have
on the horizontal axis, and let's create a very
happy eye like that. You can play around with the
size of this element with its position with everything that you want to
play around with. When we have the first eye, let's move on to
our opposite side and create something
similar here. Try to make the elements similar to one another
and when you have them, let's just go right
between the eyes, and let's create a
smiley mouth like that, and then we will go and create another element and we
will add it to our mouth. When we have the mouth, let's just go above it on one side, and let's create a half
of the ipse like that, that will represent
a little tongue. When we have it, if you want, we can go over our eyes, and we can create little
shapes for our eyebrows. When you are done
with the eyebrows, let's just go
underneath our eyes, and let's create
similar cheeks to what we had on our
first illustration. When you are satisfied
with everything here, let's just go and
add one more detail to these little elements. We will go toward our left side and we will go and create a
little flower here. Let's first go and create a little stem going in that way. Again, you can play around with the position
of the elements, and of course, if you don't want to edit, you are welcome not to. When we have this first stem, let's just go over the top and we will create
some petals here. Again, you can play around and create something different. Just find what works for you. When you are done,
let's just go to the center and let's add
this additional elements. When you are done with this, let's just go and create a
little leaves on the sides. Let's just go to
one of the sides and let's create a leaf
going in that way. Then if you want to,
let's just go to the opposite side and
create another leaf. We will also go to
the bottom part and we will create a
little element like that. If you want to
adjust the placement of this element, you know
what you need to do. You'll need to go over
your S ribbon icon and select this element. When you did it, let's
just go to our arrow key. Let's just use uniform method. If you want to, you can go and
make this element smaller. You can find a
different placement for it, maybe
different rotation. It's all up to here. When you're satisfied with the position of these elements, let's deselect it by
hitting our ribbon icon, and then let's just go and find a different placement for the whole illustration that
we have right here. Again, we are going to
our arrow key using uniform method and finding
a different placement. If you want to
change the rotation, you are welcome to
go and do that. When you're satisfied
with everything here, let's just deselect everything
by hitting our arrow key, and then let's move
on to our next part where we'll create
the next Marsh guy.
5. Ice Cream Mushroom Sketch: Let's begin this part again, going to our layers, and we will go to this
layer that we have our second
illustration on and we will rename it to
something different. Let's just tap on
our little layer and we will choose
rename from the list. When we did it one more time, we are going back to our
scheme layer and we are making another copy by swiping our layer from right to left
and choosing duplicate. Now, let's unhind this layer and let's again go to our key, let's make it smaller, and let's position it underneath
our first illustration. If you want to rotate it, you're welcome to
go and do that. So for example, this time, let's position it in that way. If you want to
adjust it even more, go to the free for method
and adjust it from here. Okay. You have the
position that you like, let's deselect
everything by hitting our arrow key and let go and start adding our
additional elements in a form of legs and arms. Firstly, let's just
go to the legs. We will go again and find the center by making
to mark down, and then we will go
a little bit toward the left and we will create a line going down in that way. When we have it on
the first side, let's just go to the
opposite one and create a similar leg right here. When we have these two lines, let's just go and add
some thickness to them. Again, going down with the perel lines or making them a little bit
wider on the bottom. Doing it on one side and do
it on the opposite side too. When we have our legs, let's just go to the bottom
and let's create this feet. Connect them nicely
with the main shape, and let's just go to
the opposite side and create something
similar here too. If you want to
change the placement of one of the elements, you are welcome to go
to the S ribbon icon, select the elements, and then go to key and adjust the placement
of your elements. When you're satisfied,
let's select what we were selecting and then let's just go and start creating our arms. Firstly, let's just go
over our left side and we will start by creating an
arm going in that way. We will create a curve
going down in that way, and then we will add
some thickness to it. One more time, let's
just go and create this similar shape to what we had on our first
illustration. When we have
something like that, let's just grab
our eraser and if you have some lines
that you need to erase, let's just go and erase them. If you need to work
more on the shape, let's just go and do that. When you're satisfied with it, let's just go over
our opposite side and let's create
another arm here. For example, let's just
go a little bit higher. There we have our intersection, and we will just go
with a line like that. Let's just go and add
some thickness to it and let's create a soft
curve of the bottom. When we have
something like that, let's just go only to
our arm on our right, and let's create
this little finger. If you have some lines
that you need to ease, grab an eraser and ease it. Now, let's get
back to our brush, and we will go and add
additional elements on our left. Firstly, let's
just go and create a cone of our little ice cream. We will go to this arm
that we have here, and we will go and start creating a triangular
shape like that. Play around with the
size of the element, but try not to go too
close to the center of the shape of the
face of our mushroom. If you overdid it,
let's just grab our eraser and erase the
part that we don't need. Also, we can just go and eraase this part right here on our arm, and also this little part
that we have for our face. Every part that is overlapping, we don't need it,
we can erase it. Then when we have
something like that, let's just go over the
top of our ice cream and let's create a
shape of the ice cream. You can play around with
what you want to add here. Just create a little
melting part on the bottom and create a nice
shape of the ice cream. Again, if you have some
parts that you need to ease, grab an eraser and erase it. Now, when we have the
result like that, let's just get back to our brush and let's just go and
add the facial features. Again, if you can go
and create this cross. If you feel very bold, let's just go straight
away and let's create our facial features just manually without any
additional lines. Firstly, let's just go
over our left side and we will create a little
e the same shape or a different shape
and the opposite sheap from what we had on our
second illustration. Let's just go with
the shape like that. When we have it, we
will just go over the opposite side and we will create the same
shape right here. Let's just go and
create it in that way. If you see that you
are not in a center, we can just go to
our S ribbon icon, select these two elements and move them through our arrow key. Find the placement, the size, and maybe the rotation
that you would like. When you're satisfied
with everything here, let's deselect everything by
hitting our S ribbon icon. When we have the
result like that, let's just go and
create a little mouth. Let us go right
between the eyes and let's create a similar
shape for our mouth. When we have this sheep, let's just go and
create a little tongue. This tank we will
position in that way, so it is going to our ice cream. Let's just go and adjust
it if you need to. If you want to add any
additional elements, you are welcome to
go and do that. For example, we can just go over the top part
and we can create little eyebrows
going in that way or in any way that
you would prefer. Also, let go right underneath our eyes and
let's create little cheeks. Now, let's just take a look at everything here and
also let's just go over the top and let's add these additional elements
that we had before. Again, you can
repeat what you had before or if you
want to experiment, you can go and try out
something different. Now, let's just take a look
at our illustration and decide whether we want to
adjust something or not. If you want to you can go either to your okey or to
a magic one to, liquefy and adjust it from here. For example, let just go and maybe make the legs
not that long. So please run with
this character, and when you are done, let's just go and
deselect everything by hitting our magic tool twice. Then one more time, let's
just go to our rokey. We will use uniform methods, and we'll go and find a different placement
for this element. Let's position it
smartly onto our canvas. We will have some
space on our right. If you want to rotate it, you are welcome to
go and rotate it. And when you're satisfied
with everything here, let's deselect everything
by hitting our arrow key, and let's move on
to our next part. We will create our
last character.
6. Lovey Mushroom Sketch: Again, let's start this part
by going to our layers. If you want, you can go and rename this layer with
our third character. Let's just tap on it,
and let's select rename. Let's just go with something
like ice fre mushroom. And when we are done, let's just go again to our with the scheme, and we will make a
Cope by selecting duplicate from when we are
swiping it from right to left. When we did it, let's unhide it, and let's just go to our key. Let's make it smaller, and let's position it on the last blink
space that we have. This time, let's just go with the rotation of
something like that. If you want to
adjust it even more, make it bigger or
smaller, it's up to you. If you want to go to
the free form method and adjust it even more, you are welcome to
go and do that too. Now, when we have
something in that way, let's position it a
little bit more higher, and when we have it, let's just go and deselect everything by hitting
our arrow key. When we did it, let's
just get back to our brush and let's
zoom in our canvas. Let's just go and start
creating the legs. Firstly, let's just
go to the bottom. If you want, you can go and make a little markdown in a center, and then let just go
with the legs like that. We will create two lines
going in that way. Of course, if you would
like to experiment, you are welcome to
go and do that, you can create any
shapes for the legs that you like and position it in
a way that you would like. When we have the legs, let's just go and add
some thickness to them. Again, going down with the peril lines or making it a little bit
wider on the bottom. When we have
something like that, let's just go to the bottom
and create a little foot. When we have it on one side, let's just go to
the opposite side and create something
similar here. If you want to
adjust the sheeps, you are welcome to go and
adjust them manually or through your selection and maybe
the okey or if you want, you can go to the Mjqutu
liquefy, it's all up to you. When you are satisfied
with these elements, let's just go and
create the arms. Let's just go to the sides and let's create something
simple like that. We will create two curves
going up in that way, and then we'll just go and add some thickness to the arms. Do it on both sides, trying to create similar
shapes on both sides. And when we are done, let's just go to the top
of these elements, and let's create little
fingers like that. When we are done,
let's just go to our cap and let's create
these additional elements. Again, if you want
to experiment, go and experiment, or just
repeat what you had before. Now when you have the base, let's just go and start
creating facial features. Again, if you need to
start by creating across, find an approximate center. If you're feeling very bold, let's just go and start by creating an eye
on our left side. This time, let's just go
with the shape of the heart. Let's just go and create
something in that way, you are welcome to create any shape that you
like right here. When you have the first eye, let's just go inside
and shade it firstly. Then we will go to
the opposite side and we will repeat
the same shape. Let's just go to the same line. Let's just try to repeat
the shape and let's position it in the same
distance from the center. Okay. Let's again
go and shade it, and then let just go
right between our eyes, and let's create a
key mouth like that. We are just going to the
sites and we are creating half of the circles
or half of the psis, and we will position
it in that way. If you want to adjust something, if you want to maybe move these elements
a little bit lower, let's just go to our S ribbon
icon, free hand method, select the element that
we want to adjust, go to the key and find a
better placement for it. If you want to change
rotation, go and change it. When you're satisfied
with everything here, let's deselect everything
by hitting our ribbon icon. When we did it if you want, let's just go and
create little eyebrows on top of our eyes. You can go with any
shape that you like. When you have your eyebrows, let's just go underneath
our little eyes and let's create little cheeks in
the shapes on the obses. Now, let's just take a
look at everything here and decide whether we want
to adjust something or not. If we will first go to our irkey and maybe change the rotation
of these elements, and if we want to
adjust it even more, we will go to our magic Quanzu and we will go under liquefy. So spend some time here and
adjust it to your liking, and when you are done, we are done with our skitch. Let's move on to our
next part where we are going to be creating
the basic colors.
7. Basic Colors + Cheerful Mushroom Coloring: Let's begin this
part by going to our layers and we will put every character that we have
right here on one layer because we don't need all these multiple layers for our sketch. Let's just go again
and either make a pinch movement or
you can just go over the top and make a
merge down and do it a few more times until you
have everything on one layer. If you want to
rename it as sketch, you are welcome to
go and do that. And now we want to see
what's happening onto the lier because we want
to recreate our elements, but we don't want it
to be very disturbing. Let's just go to our icon onto
our layer with the sketch, and we will go to
the slider opacity. We can grab it and we
can move it toward the left until we still can
see what's happening here, but when it's not that
bright and disturbing. Find the opacity that works for you when you still
can see everything, and then we will just go and tap on our lier
with this sketch. Now, let's just go and
create one more layer and we will need to put it underneath
our layer with the sketch. We can just go to our layer with the scheme and from here, create one more layer. Now we can do the following. We can go and start recreating every cap and everybody
of every character, or we can just go and use this scheme and recreate it just one time and then
make multiple copies and position them onto the
places that we have here. Let's just go with layer. Let's first go to
our sketch layer. We will hide it and we'll hide
our layer with the scheme. If you want to,
you can just go to the N icon and
adjust the opacity. Then if you want to, we
can just go and drag this new layer underneath
our layer with the scheme. Now, when we have it,
we will firstly go to our brush library and we will go to the
calligraphy folder. We will go and select
monoline brush. If you want to use the natural
looking for the lines, you are welcome to go and use it just like that, or if you want, we can go and adjust one
option of our brush, so our lines will
be quite smooth. We can just go to this
monoline brush tablet and go inside the brush studio. On the left, we'll go
under stabilization, and here on the top. You can see we have this option streamline with a
slighter amount. When it's set at
a very low value, we will go to a drown pad and we will try
out how it works. You can see we have
a lot of control over our line, but
it is quite jagged. If you want to adjust it, we can just go to the
slighter amount and set it for maximum for now to see how it looks
on our drown pad. You can see we lost
a bit of control, but we have a very smooth line. You can play with this option. You can find what works for you. You can go in a middle,
or if you want, you can go back to your
canvas straight out there, and you can always go to this option and
adjust it later on. Find the amount
that works for you, and when you are done, let just hit down over our top right. When we did it when
we set our brush, let's first go to
our color palettes and we will select the
color with the name white. When we did it, we will go and recreate this shape on the bota. Just with one line, let's
just go and create the shape. If you want to, you
can go and change the size of your brush
to something smaller, and we will just go and
recreate this line. The same way we are just using all the options that
we used before. We can hold our line
and the ends and we can go to the editing mode
and adjust it from here. If you want, you can go
and adjust this line, you don't need to
repeat everything with 100% of similarity. You can go and make
it bigger or smaller, maybe try out different sheap. It's all up to you. When we have the
result like that, let's just tap on the screen, and let's just go over the top and we will
close the sheap. We don't need to go to this
line that we have right here because later on when we are going to be creating
other elements, it still will be changed. Now, when we have
a closed outline, let's just go and drag and
drop the color inside, and when we did it,
let's just go again to our liers and we'll create
one more layer on top. When we did it, let's just go
back to our color palette, and let's select this
light grayish red color. With this color, we will go and recreate the shape
of our ellipse. Again, the same way as before, just go in there and
creating the whole shape. Hold it at the end,
and let's go to our editing mode and adjust
it from here if we need to. When we are done,
let's just tap on the screen to get away
from the editing mode, and let's just go and drag
and drop the color inside. And now we will
just need to go and make the cut to show our face. Firstly, let's just grab our eraser and we will
make it very, very small. We will go and create this
line that we have on top. Let's just go and
just create a line. With our eraser, we can use all the options that we
are using with our brush, we can hold it at the end, we can go over our edited
mode and adjust it, and then we will just go
and make a cut right here. Let's just go again and create
the line go in that way. You can see it's
not going too well, so we are cutting
the parts that we need because we don't see
what we have underneath. We can go to our layers
and do the following. We will go to this layer
that we have for our heat. So let's just tap on it, let's tap on it one more time, and we will use
the option select. When we did it, we will
go again to our layers. We will go to our
la number four, where we have this
pinkish element. We will get back to our eraser. We will increase the size of it, and we will just go and start erasing the parts
that we don't need. Very accurately, go on top and erase the part
that you don't need. Okay. Now, let's
just take a look at our illustration without
the lines of the scheme. So let's just go to
the liars and hide it. You can see whether we need
to adjust something or not. If you need to adjust something, let's just go and adjust it. If we are satisfied
with everything here, let's just go and deselect everything by hitting
our ribbon icon. Now, when we have the
element like that, let's go again and unhide
our layer with this scheme, and then we will go back to our layer where we
have this white element, and from here we will
create one more layer. Let's just go again to our color palette and let's
select this red color. We will go and recreate
the shape for our cap. Again, if you want,
you can go and make the size of
your brush smaller, and we will need to very
accurately connect our sites. Again, let's just go
and create this curve, and then we can go over our top to the agent mode
and adjust it from here. Zoom in and try to make a nice connection so you
don't go beyond the frames, or you can just go a little
bit beyond the frames, and then we can adjust these elements by going
to our eraser too. When you have
something like that, let's just go away
from our editing modes and let's just go and
connect the shapes, so we will just go right
here and make a line. Then we will just drag and
drop the color inside. Now, if you have some
little elements like that, let's just grab our eraser and very accurately erase them. Okay. Now, let's
just take a look at everything without our
lines on the scheme. Let's decide whether we need
to adjust something or not. If we are satisfied
with everything here, let's just add the
details to our cap. Of course, if you don't want to make these elements later on, if you don't want to add
them in a different way, let's just go right now and add these white elements here. So we will just go to this layer that we
have for our cap, and we will create one
more layer on top. We want our elements appear only on this area that
we have in red color. So let us go and
do the following. We will tap on this layer and
we will use clipping mask. Now, everything that
we are creating will be only on this red area. Now, let us get back to our color palettes and
select the white color, and then we will go
and start putting these dots as additional
elements to our cap. You can go with a
big brush firstly, put the dots and go
along these elements. You can vary the
size of your brush and just put these
little elements. When you are satisfied
with everything here and when you don't want
to adjust anything. We can go back to our
layers and we will go to all these four layers that
we have for these elements. We will select them and we will then go to
the group option. We can go to this
new group and we can rename it as scheme number
two or colored scheme. When you are done, let's just go and unhide
our layer with the skche then we
will go and start making the copies of this
colored scheme group. Firstly, let's just go to this V icon and will
collapse our group. We will go and
swipe it from right to left and we will
choose duplicate. Now, we will go to the bottom
one and we will hide it so we can store it and we will
just go to this new group. We will go to our arrow key. We will make it smaller and we will use firstly
uniform method. We will go to this
first character and we will position it on it. Again, you don't need
to repeat everything exactly as you have
it onto your skit. When you have
something in that way, let's just deselect everything
by hitting our arrow key. Now let's just go again and do the same thing for our
next illustrations. We are going to our layers. We will first go to
this new group and we'll rename it as our
cheerful mushroom. Then we will go again
to our colored scheme. We will make a copy by
making a duplicate. Straight away, you can go and rename it as flower mushroom. Let's unhide this group, and when it is selected, we are going again to our key, we are making it
smaller and we are positioning it onto our
second illustration. Let's de select it
when it's ready, and let's just do the same
thing two more times. Go into our layers, making a copy of colored
scheme by duplicating it, renaming it, go and position
it onto our illustrations. When you did it, let's just go and start adding our
additional elements. Firstly, let's just get back
to our layers and let's just go to one of the groups that
we have for our mushrooms. For example, let's just go
to our cheerful mushroom. Let's just go and
uncollapse our group. We will go underneath our
layer with our main shape. Let's just go to it and from here we will
create one more layer. We will get back to
this main body and we will drag it
above our new layer. Everything in that way
stays in the group. We will go to this new layer. Of course, if you want, you can go and rename all
of these layers. But as we are in the group, we can just keep it as it is. When we are in this new layer, we are using the same
white color and we will just go and
recreate these elements. Again, let's just go and
decreticize of our brush, and we will just go and
recreate our elements. Again, if you want, you can go and adjust them
to your liking. You don't need to
repeat everything exactly as you have
it onto your skitch. Remember that we will need
to close the shape on the top to be able to drag and drop the color inside the shape. When you are done
recreating these elements, you can go again to your layers and hind the layer
with the sage to check out whether you
like everything or not or whether you need to
adjust something or not. When you're satisfied, just get back your layer
with the sage and let's just go above
this layer with the body and we will create
our facial features. Let's create one more
layer and onto this layer, we will go back to
our color palettes and select the
dark sea and blue. We will go and recreate
our facial features the same way as before with
all of our sheeps. When we are done recreating
the basic facial features. Let's just go to the
element to our eyes, and let's add our
highlights here. As we already have our
white color on our screen, we can pick the color from here. We will need to hold
one of our fingers on the screen where we
have our white color, and you will see we invoked
our eye drop a tool. When we have the white
color on top of this tool, we will lift up our
finger and you will see that we've changed our color
right here on the top. Let's just go and increase
the size of eye brush, and let's just go
over the top of our eyes to one of the sides and let's put the
dots like that. When we did it, let's
just go and select this pinkish color that we have on the bottom part of our cap. The same way invoking
our eye drop as when we have the
needed color on top, lifting up our
finger and going and recreating these elements
that we have for our cheeks. Now, let's get back to our
layers and hide our layer with this cage to see whether
we like everything or not. If we do, let's just go and
add some additional elements. For example, let's just
go and add some shadows. Let's go to this layer
that we have for our legs and from here we
will create one more layer. We will clean this layer
to a previous one, tapping and selecting
clipping mask, and then we will go to our icon and we will change the blending
mode to multiply. We will go to the pacity
ladder and let's just go with pacity around 15 or 20%. If it's not enough or
if it's too bright, we will just get back to this option and we will
adjust it if it's needed. When we did it, let's
just get back to our color palettes and
let's select this CN color. With the CN color, we will go underneath the shade that
we have for our body, and we will just
repeat it this way, we will create our shadow. We will do the same
with the arms. Just go in there and creating
the shadow in that way. If you want to add
additional shadows, you are welcome to
go and do that. If you are satisfied
with everything here, let's just go again
to our layers, and we will go to our
bottom part of the cap. It is our layer number four. From here, again, we will create one more layer,
we will clip it, we will go to our icon and change the blending
mode to multiply. Let's just go again with
something around 20%. If it's not enough or too much, we will get back and
change it later. Now, let's get back to
our color palettes and let's select either
pink or red color. When you are done with it, let's just go and add a little shadow right here on the bottom part
of our mushroom. So we will very
easily go right here underneath this little element where we have our intersection. If you are doing it in
that way, don't worry, we can just grab our eraser and just continue creating the
line going in that way. So we are just elongating this line that we
have for our head, and in that way, we are creating
our little shadow here. If you want to go
to the opposite side and add the shadow here, you are welcome to
go and do that. If you don't want to do that, we are done with
this illustration, but we will just need
to go underneath it and we will add a
little shadow here. Let's again go to our layers, and we will go to this layer
where we have our shadow. From here, we will
create one more layer. We will go to these two layers. We will select them
both, and we will drag them higher
than our new layer. Again, everything
stays in a group, we are getting back
to this new layer. We are going to our
color palettes, and again, we are
selecting our son color. With this color, we
will go underneath our rushroom guy and we will
create an pse like that. You can play around
with the size it, you can play around
with the position it. It's all up to you. Just create the shadow going in that way. When you're satisfied with it, let's just go and drag and
drop the color inside. Again, going into
our icon on the top bright and just dragging
and dropping the color. In that way, we are done
with our first illustration. Let's just go to our next part, where we'll create another one.
8. Flower Mushroom Coloring: Let's begin this part again
by going to our layers. We will go to this
cheerful mushroom. We will hide this group, or we can just go and collapse
it. It's all up to you. Let's just go to this V icon, collapse the group, and let's
just go to our next group. We will unhide our layer
with the kitch then we will just go to this V icon
and we will just tap on it, and we will start
all over again. Again, we are going to
our layer with our body. We are starting by
creating a new layer. We are dragging this
layer with the body higher than the new layer and getting back to the knee layer. When we did it, going back
to our color palette, selecting the white color, and going and recreating these elements that
we have on the Bam. Very easily, let's just go
and recreate these elements. When you are done, let just go and add the shadows,
one more time, going back to our layers, let's create one
more layer above this layer with our
legs and our arms. Let's clean this layer
to a previous one, going into the icon and changing the blending
mode to multiply. Go into the opacity is similar
to what we had before, so around 15 or 20%. If you are not sure,
you can get back to your previous illustration and see how much of
opacity you use there. It was 15%, so we will use the same value on our
next illustration. Let's just set it at 15%. Let's go again to our
color palette using C N color and adding the
shadows in that way. Firstly, we will go to our arms and we will recreate this shape. We are just repeating
the shape of our head, and when we have it,
we will go and put this leg that we have in the back completely
in the shadow. Also, we will just go to
the leg that we have in front and we will make a
little shadow there too. Then we will just move
on to the leg again that we have in the back and
we'll put it in a shadow. If you need to, you can go and check it out without
the lines on the sage, decide whether you need to
adjust something or not. If you need to grab
an e razor and adjust it or just go and do
it with your brush. Again, it's all up to you. When you're satisfied with it, let's just get back
to our layers. Let's hit our layer
with the sketch. Let's go again to our
layer with our cap. Let's create one layer
here. Let's clip it. Let's go to our icon, change the bladed
mode to multiply. Change the capacity to
something around 20%. Now, one more time, going
back to our color palette, selecting the pink color, and let's just go
to this right part and we will again create
this little shadow here. Again, if you want,
you can go to the opposite side and
create the shadow here too. When you are done
with the shadow, let's just go and add
our facial features. Again, go into the layers, go into our layer with our head, and from here, we'll
create one more lay. Going back to our color palette, selecting dark sea
and blue color, and let's just go and
recreate our elements. For the tank, you can go on this li and very
accurately edit here, or we can just go to the layers, go again to our lier with the
heat from here, create one, More go back to color palette and select
either pink or red color, and just repeat the shape
that you have on your sketch. When you are done, you can
get back to your liars and combine these two layers with
facial features together. Go to the top one, tap on it, and choose merge down. Now, let's continue by going and recreating the shapes
for our cheeks. Again, you can pick the color
from what you already have onto your screen and just go there and recreate
these elements. Now, take a look at
your illustration without the lines on the sage, decide whether you want to
adjust something or not. If you don't want to do that, let's get back earlier
with the sage, and let's just go and
recreate this little flower. We will go above all the
leaves that we have here, we'll tap on the plus icon. We will go to our color palettes and select the dark son blue, and we will go and start by recreating our stem
and our leaves. When you do it, let's
just get back to our color palettes and select
the color for our flower. For example, let's just go with the same red or let's
just use the pink color. When you have it, let's just
go and recreate our petals. Dragon drum the color inside, if you have the stem
going in that way, just manually go and
recolor this area. When you did it,
let's just go back to our color palettes and select either yellow orange or orange, and let's just go and
add these middle parts. Now, when you're done
with this flower, let's just go again to lis. Let's hide our layer
with this sage. Decide whether you want to
adjust something here or not. For example, we can
go and maybe make the middle part not
orange but yellow orange, just drag and drop
the color inside. When you did it,
let's just go and add this little shadow underneath
our little elements here. Let's again go to our lis. Let's just go to our layer with the shadow on our legs and arms. From here, we'll
create one more layer. Let's select these two layers
that we have on the bottom, drag them higher
than the new layer, go to the new layer, go back to the color
palettes like the C N color, and create something similar to what you have on your left. We will also put a little
shadow underneath the flower. Drag and drop the color inside, and when you are done, we are done with our
second illustration. Let's move on to our next part. We will be recreating
the third one.
9. Ice Cream Mushroom Coloring: Let's begin this part again
by going to our layers. Let's collapse this group
with our flower mushroom. Let's go and unhide our
layer with the sketch. Let's go to our ice
cream mushroom. We are uncollapsing our group. We are going to our layer with the body and creating
one more layer here. We will drag this layer with the body higher
than our new layer, going back to our new leer, going back to our color palettes and selecting the white color. Let us go and d create
our arms and legs. When we are done with our
legs and with our arms. We have this little element
right here overlapping. So let's just get
back to our liers, we will go to our
lay number four, where we have this
bottom part of the cap, and very accurately, we will
erase this little part. Now, when you are done, let just get back to our layers. Let's just get back above our layer with the
hat or if you want, we can just go right here
from our lay number four. We will create a new lier, and we will go and recreate
the shape of our ice cream. So firstly, let's just get
back to our color palettes. Let's select our
yellow orange color, and let's recreate the come. Close the shape,
dragon drop the color, and then let go
again to our layers. Let's just go to our layer
with our legs and arms. Let's tap on it, let you select, and we will get back to
our layer with the cone. Let's just grab our eraser and let's erase this part
that we don't need. Now, let's deselect everything by hitting our S ribbon icon, and let's see whether we need to adjust
some parts or not. If we need to, we will just
grab our brush and we will go over the elements that we need to adjust and
we will adjust them. When you are done,
let's just go to our layers and let's add some additional
elements to our coon. We will do it very easily by going to this new
layer with our con. We will tap on it, and we
will choose alpha lock. Now, everything that we
are creating will be appearing only on
the existing areas. Now we are going back to our color palettes and
selecting the orange color. Let's just go and create
a pattern like that. When you are done,
let just get back to our layers and let's create
one more layer above. On this layer, we will get
back to our color palettes and let just go and select
light and color. We will go and recreate the sap on the top
of the ice cream. Dragon drop the color inside. Take a look at it without
the lines on the sage, decide whether you need to
adjust something or not. If you're satisfied,
you are welcome to go and continue creating
the additional elements. For example, let's
just go and add a little highlight right here on the top of our ice cream. We will go and invoke
the eye drop at. We will select the white color, and we will go above this
element on the left side, and we will create a little
highlight like that. Okay. When you are done, let's just get back
to our layers, and let's just go
and start adding our shadows to our
legs and to our arms. We will go back to this layer, and from here, we'll
create one more layer. Let's tap on it. Let's
select clipping mask. Let's go to our icon and change the blending
mode to multiply. Go with the 15% of
opacity for this layer, going back to our color palettes and selecting the CN color. Let's increase the
size of our brush, and let's just go underneath the hat and recreate
the shape it, and in that way, we
will add our shadow. Let's do the same with the arms. Let's just go with
something like that and create our little shadows. If you overdid it or if you
need to erase some part, go and erase them. When you are done,
let's just get back to our layers and we will go to our layer with the
bottom part of the cap. We'll create one more here, we will clip it, we
will go to our icon, change the blending
mode to multiply and go with 20% of opacity. Going back to our color palettes and selecting the pink color. Now, let just go and continue creating
this line right here. If you overdid it, if you
need to adjust something, grab an eraser and adjust it. If you want to go to
the opposite side and add the shadow here too, you are welcome to
go and do that. Now, when we are done
with the main shape, let's just get back
to our color palette and let's unhide our
layer with the Skech. Now when we did
it, let's just get back to our layer with the head. From here, we'll
create one more layer. We will get back to
our color palette, select dark sea and blue, and we will go and recreate
our facial features. Again, for the to, we can
go back to the layers, create one more layer underneath our layer with
the facial features, select the color and
add the t from here. And then we can just
get back and combine these two layers together
by going to lay on top, taping it, and select
and merge down. When we did it, let's select this pinkish color from our
bottom part of the cap, and let's just go and
recreate our cheeks. Now, let's just take a look
at it without the lines on the stage and we will go and
add our shadow on the bot. Again, we are going
to our layers. We are going to our
layer with the shadow. From here, we are
creating a new layer, going and selecting these
two layers on the bottom, dragging them higher
than our new layer, going back to our
new layer and going back to our color palette to
select the sea and color. With this color selected, we are going to the bottom
and creating this p shape. When you are done, dragon
drove the color inside, and when you did it, we are done with our third
illustration. Let's move on to our last part, WerewRcreate, our
last illustration.
10. Lovey Mushroom Coloring: Let's begin this part. Firstly
by going to our layers. We will collapse our group
with ice cream mushroom. We will unhide our
group with the sketch, and we will go to
our lave mushroom. Let's open the group
and let's go and start recreating
our legs and arms. Firstly, go into our
layer with the heat, creating one more layer above, go into this layer
with the heat, dragging it higher
than our leer, going back to the new layer, selecting our white color, and recreating these elements. When you are done
recreating these elements, let's just get back
to our layers, and let's start adding
the shadows to them. We are again creating
one more layer. We are clipping it, we
are going to our icon. We are selecting
multiply blending mode, going with 15% of opacity. Going back to our color palette, selecting the C N
color and going to these elements
and aging shadows, just repeating the
shape of the hat. When you did it, let's just
get back to our layers, and let's just go to our layer with our bottom part of the cap. Let's create one more layer
above. Let's clip it. Let's just go to our icon change the blending
mode to multiply, and let's go with 20% of
opacity for this shadow. We will get back to
our color palette, select the pen color, and let's just go
over one on the side. For example, let's
go to the left one, and let's create this
little shadow here. Just continue with our line. When we did it, let's just
get back to our layers, and let's just go to
our layer with the hat. From here, we will create
one more layer and we will start recreating
our facial features. Firstly, let's just go and
select our dark sea and blue and recreate our
mouth and eyebrows. When you did it, let's
just get back to our color palette and
select the red color. With this color, we will go and recreate the shapes
for our hearts. If you want them to be
similar on both sides, you can go to S ribbon icon, select the sheep that you
have just created on one side and go with three fingers
down onto your screen. You will invoke the
op and paste menu and you will need
to tap ope here. One more time, wiping three fingers down and
we are selecting paste. Now, you can see we have the bounding box
onto these elements. We can just go to
the opposite side and position this
element right here. So now, when you are done, let's just tap on our air key. We will then go to our layers, and we will combine these
two layers together. Go into this layer with
the heard tapononate and selecting merge down. Now, everything is on one
layer and we will need to pick this color from the
bottom part on the cap, and we will just need to go
and recreate our cheeks. Now, let's just
take a look at it without the lines on the sage. Go into the layers and hide
in our layer with the ska. If we like everything here, if we don't want to
adjust anything, let's just go and put this shadow underneath
our little guy. Again, going into the bottom, going into our layer with
the shadow from here, creating one more layer, going into these two
layers, selecting them, dragging them higher
than our new layer, and going into our layer
that we have just created. Then when it is selected, we are going back to
our color palette, selecting our son color
and going underneath this little mushroom guy and
creating our little shadow. Okay. Adjust the placement
of this element. If you need to adjust
the curvature of it or anything that you want to adjust through
your editing mode. When you are satisfied, just drag and drop the color inside, and let's just take a look at
everything from the distat. For example, you can go and
create one more li and add some additional elements alone
your little mushroom guys, or if you don't want to do that, we are done with our class. Thank you for watching
this class, review, elected, and a subscribing for more I videos in the future. Looking forward to
senior projects.
Uni Corn, ⭐Kawaii Art Enthusiast⭐
