Transcripts
1. Introduction: Hello, everyone. I'm uni
and into this class, we'll draw some
breakfast friends. This class doesn't require any prior experience
or fancy tools. We'll start from
scratch and we'll be using simple techniques
throughout the process. Everything you'll see will
be happening in Procreate. However, if you have a software or want to try
traditional materials, you're welcome to join. If you are ready to start,
let's jump right into it.
2. Sketches: Let's begin this
class firstly by deciding what kind of canvas
we are going to be us in. Today we are using a
standard square canvas that you can find in procreate. Both pixel weight
and pixel height are set at 2048 pixels. RDPI are set at 300 and our color profile is set as
SRGB weigh this slow number. When it's done, let just he
done over our top right, we will be redirected
to R N canvas. Let's just zoom it out so we
will see the whole canvas, and then we'll need to
decide what kind of colors we are going to be in
throughout the whole class. If you want, you can
use your own colors, but if you want to follow along, you can go to the
project and rusher tap and download all the materials, including the color palettes. Firstly, let's just go and change the color
of our background. We will go to our layers and we'll go to the
background color layer. On the bottom, you can see
you have your color palettes. But for us, it'll
be easier to go under palettes right here
on the bottom right, and here go under carts. We will see all the
colors names here, and it'll be easier for us
to navigate through them. Firstly, let's just tap
on our purple color, and it will be our
background color. When we did it, we will need
to go to the brush library, and we'll go to the
sketch and folder. We can select any brush that
you like from this list, you can try it out
onto the canvas, if you don't like it, get
back to the brush library, select another brush and
find what works for you. When you found the
brush that you like, let's just go to
our color palettes. Here, one more time,
we'll go under cards, and we will select either
dark brown or dark red color. Select one of these colors and let's just get back
to our canvas, and we will start
with something very simple with this
sketch of a little. Firstly, let's just go to
this area on the top left and we will start by creating
a shape of the circle. We are creating it
just with one line. We will hold it at
the end and you will see that we snapped
it to a better sheap. Let's just go and make it the size of something like that, and then we'll go over the
top of the option ellipse. Here you can see we
have the option circle. We will tap on it, and our sheap will snap to a
perfectly round circle. If you want to move it, you
can hold your apple pencil at some blank space and move it to the place
that you like. If you want to make
it bigger or smaller, go right between the blue nodes, hold you apple
pencil and drag it dagonal up or down depending
on what you want to do. Find the size and placement on these elements
that you would like, and let's just get away from our edition mode by
typing on the screen. When we have this first element, let's just go around our elements and we will create
a wobbly shape like that. You can play around
with the shape. You can make it different from what you see right
now onto your screen. Just create a wobbly shape, and if you have some elements
that you need to adjust. For example, right here, we can just go and
erase this part, maybe adjusted in any way and just create a nice
and smooth shape. So when we did it,
our egg is ready. All that we need to
do is to go inside our yoke and we will just need
to create facial features. Let's firstly go over our left side and we will
create a shape like that. We are going to the left, we are creating a
little element. We are going inside
and shaking it. You can go either
with a circle or with an pse when you
have the first shape, we will go to the opposite side, trying to keep the distance
from the center and from the side even
on both sides. And when we have the second
shape, We have our eyes. Now, let's just go
right between them and we will create a smiley
mouth like that. Let's create a kit mouth. We will just go and
create two half of the circles or two half of
the ellipses like that. You can adjust the
position of the element. If you need to adjust
something different, you are welcome to go grab an eraser and adjust
it to your liking. When we have the
result like that, if you want to add
additional elements such as eyebrows or maybe
something else, you are welcome to
go and do that. In that case, let's just
go above our eyes and we will create little
curves for our eyebrows. When we have
something like that, we will go underneath
our eyes and we will create circles or
ellipses for our cheeks. Again, you can play
around with the size of these elements and
with their position. When we have
something like that, let's make the whole shape
a little bit smaller so we can position the rest
of the elements nicely. What we need to do is to go to our key on the bottom we
are using uniform methods, and you can see we have
this bounding box. Let's just go to
one of the corners, for example, the top right. We will just hold
our apple pencil at the corner and we
will drag it down. Let's find the position the same way we will hold
our apple pencil and we will just drag it to the place that
we want it to be. If you want to rotate it, we will go to this green note, we will hold our Apple pencil, and we will go in a
circular movement. Find the position and everything that you want for
these elements, and let's then go
and deselect it. We will heat our key and then
when this sketch is ready, we will go to our
layers and we'll create one more layer by tapping
on the plus icon. When we have the second layer, let's move on to the
right from our egg and let's sketch a
little box of juice. Very easily, just by hand, we will go and start by creating two lines
going down in that way. Try to make them parallel, but for now as we are creating a skatee it doesn't need
to be very straight. We can fix it later on. When you have these two lines, we will go to the bottom
and we will continue by creating one line right
here and one on the top. So just creating a
shape like that. When you have
something in that way, we will need to add
some thickness to it. Let's first go to
the scorer that we have right here on the
right on the bottom, and we'll create a little
line going in that way. We will do the same with
the rest two corners. Let's just go to the top. We will try to make this line parallel to one that
we have on the bottom, and we will do the same
with the scorer on the top. When you have these three lines, we will need to
connect them with similar shapes to what we
have on our mean shape. Just creating a straight line on the top and another
straight line on the side. When you have
something like that, let's just go and add some
beautifications here. Firstly, we will
go to the top to the left side and we will
create a little straw. Let's just go and make a little mark down
somewhere right here. When you have it, we will just go up with two lines like that. You can add the thickness
to your and you can make it very thick or very
thin. It's all up to you. When you have these two lines, we will go to the side, we will step a bit from
this line right here, and we will just create
two more lines like that. When you have it, we will
just need to connect these two lines on the top with these lines that we
have on the bottom. So we'll just go to the
top line and we will create a little curve
going down in that way. When you have it, we will go
to these two lines and we will create a little connection
in the shape of the ipse. When we have
something like that, let's continue creating
our beautifications. Firstly, we will work
onto the top part. Let's just find the
middle part of it and we will create another
straight line like that. When we have it, we will do the same with this
side on the right. Again, we are
finding the center, we can make a little markdown
and when we have it, we will just go down
with a straight line. When you have
something like that, let's just work onto our front. Firstly, we will go
more toward the bottom. If you want, you can go and make a little markdown
somewhere in the center, and from this markdown, let's just go and create some
peculiar shape like that. We will color it differently, so you can play
around with the she. When you have it,
we will just go to the bottom and let's just
create a little label here. We will create a line going in that way
and then we'll add some thickness to it by creating a parallel
line on the bottom. Let's connect these two lines
on the sides with a curve. One curve on our left
and one on our right. Here, we will just go inside and let's just
write down orange, or if you want to play around, maybe you can go and create
something different here. Let's just go to this label and let's add some title here. Okay. If you want to
add more details, you are welcome to
go and do that. For example, we can go
to one of the sides and we can add two little
elements like that, that will represent the leaves. If you want to play around with the whole element
here, for example, you can go with
something like a shape of the orange like
an actual orange, and you can just draw
it here if you want. If you want to play around and create something different, you are welcome to
go and do that. Now when we are ready
with this libel, let's just go to the top and we'll create our
facial features. Firstly, go into our left side. Again, let's start by creating an eye similar to
what we have one. When you have this first eye, let's move on to
the opposite side, trying to keep the distance from the center and trying to
put it on the same line, and also trying to make it a size that we have on our left. When we have these two yes, let's just go right
between them, and let's create a
simple smile like that. When we have it, let's
just go above our eyes, and let's create little
eyebrows like that, or if you want to experiment, you are welcome to create
any shape that you like. When you have it, let's
just go underneath the eye, and let's create again
our little cheeks. One more time, let's just go and adjust the placement and
size of the elements. We will go again to our
arrow key uniform methods. Let's move our
shape a little bit, and then if you want, let's
just go and make it bigger. For these elements, let's
not rotate it for now. We can do it later on because
we are going to be creating straight lines and we
are going to be using one tool that Procreate
has and for now, we don't need any rotation here. Let's just find the size that
we like when you found it, let's just go and deselect everything by hitting
our error key. When we did it, let just
go again to our layers and we'll create one more layer above our layer with the juice. We will go underneath our egg, and we will create a
little coffee cup. Firstly, let's just go to
the top and we will create an s the same way as we have created our circle on the egg. We will hold our
shape at the end. If we need, we will
go over the top and we'll adjust it by moving
our little nodes here. You can hold your apple
pencil at one of the nodes, you can drag it to any
place that you like. Let's for now just make
the shape straight. When you are done, let's
just tap on the screen, get away from this mode, and let's just go and create another ipse going
around the sheap. Just go in there,
creating the sap, holding it at the end,
trying to make it straight. Then if we need
to, we'll go over the editing mode and we
will adjust it from here. Try to make it parallel to
the one that we have inside. When we have this sheap, let's just go and
tap on the screen to get away from
our edited modes, and then let's just go and
work more onto our cap. Firstly, let's just
go to the sides, we will go and create the
lines going down in that way. When we have these lines, we will need to go
underneath and create another curve that will be parallel to what we
have on the top. Just create a curve,
hold it at the end. If you need to go to the editing mode and adjust
the curvature from here, you are welcome to
go and do that. When you did it,
let's just go and create another curve going down. What we need to do firstly is to go to the sides and we will go a little bit beyond the frames with little lines
going in that way. When we have it one more time, we will go and create
another parallel curve. As always, hold it in the end, if you need to adjust
the curvature, go over the editing mode
and adjust it from here. When you are done
with it, one time, we are going to the
sides and we are going with two lines going
down in that way. When you have these two lines, you can also go and adjust
the size of the lines. It's all up to you. We will just need to connect
them with another curve. Again, let's just go and create another parallel curve to
what we have on the top. Again, if you need to adjust it, go over the editing mode
and adjust it from here. When we are done, let's just go and make this whole element
a little bit smaller, so we will have the
place on the bottom, and we can add other
elements here. Firstly, let's just
go to our air key, we'll go to one of the corners, and we will make the
whole shape smaller. Let's position it a
little bit differently, again, so we have the
blink space on the bottom. When you are done, let
just tap on our key, and let's continue by
going to the sides, and we will create two
descending lines like that. Firstly, let's just go and
create little marks down, one on the left,
one on the right, trying to keep the same
distance from our edges. When we have it, let us go
down with two lines like that. You can play run with
the size of your cup. All that we need
to do is to create these two lines that are
going toward the center. Now when we have
something in that way, let's just go to the bottom
and create another curve. Again, we are holding it at the end and we are
creating our sheep. If we need to adjust
it, we are going over our editing mode and adjusting
the curvature right here. When you are done,
if you think that maybe you want to adjust
your shape a little bit, we can go and do that. For example, let's just
make these two lines going a little bit more toward the center. What we need to do? We will go to our key, and here on the bottom, we will go under distort. Here, we will go to the bottom. We will go to the nodes
right here to the corners, one on the right, let's
just start from here. We will hold our
apple pencil and we will drag the shape
a little bit inward. When you did it, we will do the same with the nodes on our left. Let's find the size and let's find the rotation on
the lines that we like. When you are down,
we'll just go and deselect everything by
heating our arrow key. When we did it, let's get back to our brush if
it's not selected, and we will go and create a
little holder for our cup. Let's go to the middle. We'll make a little mark down
somewhere in the middle, and then we will go
a little bit higher and we will create
another parallel curve. Hold it at the end, as always, we are going a little bit beyond the frames that we have as
our lines on the sides. When we have this line,
let's just go again to our g mode and we will drag
it a little bit higher. When you have
something in that way, let's just go to our
canvas one more time, and we'll go to the bottom and create another
parallel curve. One more time, holding
it at the end, adjusting it through our
editing mode if we need to. Let's just find
something in that way. When you are done, let's
just go again to our canvas, we will go to the side and we will create
another line like that. We are again going a little bit beyond the frames and we are creating a parallel line to
what we have on our side. When you have it in that way, let's just grab an eraser and as the lines that we don't need. Now, when we have
it on one side, let's just get back
to our brush and do the same thing on
the opposite side. Again, creating
the parallel line, erasing the lines that we
don't need after that. As for the two parts, let's just go zoom
in our canvas and we will go there and create
a little element like that. We are connecting this
shape with another shape, and we'll do the same thing
on the opposite side. Now, when we did it, let's just go inside this
little holder, and we will go and create
the lines like that. They are going a
little bit inwards and we are just creating them
very easily like that. Don't worry if they are not very straight or if they
are some crooked, it's all good later on
we will adjust them. When we have it, let's
just go again to this holder and let's
create artificial features. Firstly, let's just go
to one of the sides and we'll create an
I going in that way. Try to make it very
nice and very smooth. If you want, you can play
around with the shape. Of course, if you want to create different facial features, you are welcome to
go and do that. When you have the first eye, let's move on to
the opposite side, and let's create another
shape like that. If you want to add any
additional elements right here, for example, some eyelashes or
anything in that way, you are welcome to
go and do that. When we have the eye, let's just go right between them and let's create a
mouth like that. Firstly, we are creating
the street line, and then we are going
down and creating half of the circle or half
of the ellipse like that. When you have this sheep, let just go above our eyes, and let's create little
eyebrows like that. When we did it, let's just
go underneath our eyes, and let's create little cheeks. Now, when we did it, we
are done with this keg. Let's just zoom out
our canvas and let them go to our layers and
create one more layer. Now we will go to
the last blank space and let's create another egg
but in a different sheap. Firstly, let's just go and
create an ellipse like that. Again, the same way as before, just holding our apple pencil. We'll snap it to
a better shep and then we will go and adjust
the shape a little bit. When we have the sap, we
are going again to our are and then we
will go under work. Here we can see we
have the bounding box, but also we have
the lines inside. That means that we can go
to any intersection or to any line that we have here and we can adjust our sheep. All that we need
to do is to go to the bottom and we will
drag our corners outside. We are creating an egg sheep. If you want to go to the top and drag these corners a
little bit inward, you are welcome to
go and do that. Now when we have
something like that, let's just get back to
our uniform method, and let's just make this
egg a little bit smaller. We will have some
space on the bota. When we have this sheep, let's just go deselect everything by heating
our arrow key. When we did it, let's
just go over the top firstly and we will
create a little cut here. We will just go firstly
more toward the bottom. Let's just make a little
mark down right here. When we have it, we
will just go and create little triangular
shapes like that. You can vary their size, you can vary their placements, the amount, everything that
you want to vary here. When we have these shapes, let's just go over
the top and we will create another pair
of these elements. Firstly, let's just
go over the top. We will continue creating the line that we have
right here on the top. Again, we will create a
few of these elements. You can make them parallel to the ones that you
have on the bottom, or you can make them very
different. It's all up to you. Create your shape in that way, let them go, grab our eraser
and erase the top part. Now, when we have it, we will go inside these little cuts and we will
create a little curve here. Firstly, let's just get back to our brush and let's just
do it just with one line. Hold it at the end. If it
snaps to a straight line. Don't worry. We'll go over
the top and here we will find the option arc that we can adjust by going to
our little nodes. Let's just make it that curvy, and when you are done with it, let's just tap on the screen to get away from our exiting mode. Now when we have this egg, let's just go to the bottom and we will create the egg holder. One more time, let's just
go to one of the sides and let's just find the
center on this shape, and then we will go through
this little mark down and we will create a curve going through the whole
shape of our egg. Again, hold it at the end, try to make it very
curvy or less curvy. It's all up to you, adjust
it from your editing mode. When you are done
with adjusting it, let's just go up on the screen and let's continue
creating our shape. What we'll need to do next is to go to the sides and
we will need to create a shape of the holder that will look like
a pecular glass. Creating a curve going
down in that way, and when we have it, we will do the same on the
opposite side. Again, now you don't need to worry these lines to be
very parael to one another. It's okay, later
on, we will fix it. Now we are just marking down all of the things that we will
need to create later on. When we have the
shape like that, let's just go to the
bottom and we will firstly create two lines
going down in that way. When we have these two lines, we need to connect them nicely with the shape that
we have on the top. Let's just create a
smooth line going in that way and we will do the
same on the opposite side. So just turning these two
lines into the curves, and then we'll go to the bottom and we'll create
another ellipse. It's the same way as before, just creating the sheep,
holding it at the end, if we need to go to
the editing mode, adjusting it from here, try to make it a
little bit smaller and try to make it
even on both sides. When you have it, let just grab our eraser and let's erase
the lines that we don't need. When we have
something like that, let just grab our brush and we will go to the
sides and we will connect our sheep on the bottom again with little
curves going inwards. If you want to work
more on the shape, you are welcome to
go and do that, or if you are quite satisfied
with everything here, just let's continue by
creating our facial features. Firstly, let's just go to our
middle part to this holder, and we will start by creating
an going in that way. Just creating a
triangular shape. When we have it, we will do the same on the opposite side. Try to put it on the same line, try to put it on the same
distance from the center. And when you have it, let's just go right between the eyes and we will create a mouth similar to what we have right
here on our cup. Firstly, creating
this line that is straight and then going down
with a curve like that. Again, if you want
to experiment, you are welcome to create any new facial features
that you like. Now if you want to create
any other elements, for example, the eyebrows, let's just go and create them. When you are done
with the eyebrows, let's just go underneath our eyes and we'll create
little cheeks like that. Now, let's just take a look at everything from the distance and decide whether we want to adjust anything or if we are
satisfied with it. Firstly, let's just go
to this egg that we have just created and let's just
move it a little bit down. Let's go again to our a key and let's find a better
placement for it. Okay. So when you
find the placement, let's just deselect
everything one more time, taking a look at everything that we have here for our sketches. And if we like everything, if we don't want to
adjust anything, we are ready to move
on to our next part, where we are going
to be starting to create our base colors.
3. Sunny-Side-Up Egg: Let's begin this part firstly
by going to our layers, and we will need to put all of our layers that we have for
the sketches on one layer. Let's just go to our
layer number four. We will tap on it, and
we will choose merge down and we will do
it two more times. When we did it, everything
is on one layer. Let's just go tap on
it and we will choose the option rename and we'll
rename this layer as Skech. When we did it, we
will need to go and change the opacity on the lines, so they will be a little bit more transparent and it'll be easier for us to see what's
happening onto this layer, when we're again creating
our base colors. What we need to do is
to tap on the end icon. You can see we have
the slider opacity. We can grab it and we
can move it more toward the left until we still can see what's happening
onto this layer, but when it's not that bright. So find the apacity that works for you, and
when you're done, let's just tap on our layer with the skitch to
close this window. When we did it, let's begin
by creating one more layer, and we will need to put it underneath our layer
with the skitch. So holding this
layer and dragging it under our layer
with the skitch. Let's just go and train
in this layer as yolk. When we did it, when we
have this new layer, we will go to a brush
library and we will change the brush by going to
the calligraphy folder and choosing mon line brush. As we want all of our
lines to be very smooth, let's just go to
this monoline brush and we'll adjust
one option of it. We'll tap on it, we will go
inside the brush studio, we will go under
stabilization here. You can see we have this option streamline with a
slighter amount. If it's set at a very low value, we can just go to the drone
pad and try out how it works. We can create a line, we have a lot of
control over it, but this line is quite jagged. If it's okay with
you, if you want to create these lines that
look very natural, you are welcome to
go and do that. But also, you can just go to the slider amount and you can adjust the amount
of stream line. For example, let's
just set it at maximum and let's try out
onto our drone pad. You can see we lost a bit
of control over our line, but our line is
very, very smooth. You can just go and play
around with this option. If you want, you can go back to canvas
straight out there, if you don't like how it
looks or how it works, you can always get
back to this option and you can adjust it later on. Find the amount
that works for you, and when you are
done, let's just hit done over our top right. Now when we did it,
when we have a brush, let's just go to
our color palettes and we will select
this yellow color. When we did it, let's just go and recreate the lines
that we have here. You can adjust the size of
your brush to your liking. All that we need to do is
to create the closed line. So let's just go and use all the options that
we used before. We can hold our Apple
pencil and the end, we can go over our top
to the editing mode, adjust our line from here. If you want to maybe change the size of your elements
or its position, you are always welcome
to go and do that. You don't need to
recreate everything with 100% of similarity. So when you have these
elements, when it is closed, we'll go to this icon
on the top right, and we'll just drag
and drop the color. When we did it, let
just tap on the screen, let's get back to our layers, and we'll create one
more layer above. Let's rename it as white. We will need to drag this
layer underneath our yolk. Let's just hold it and
let just drag it down. Also, while we are still
here into our layers, let's put these two
layers in the group. When the first
layer is selected, we will swipe the next layer with the yolk from
left to right. You can see now these
two layers are selected, and we have this option group over the top right.
Let's just heat it. Let's just go to this new group, we'll select it,
we will tap on it one more time, and we
will rename it as. Now, when we did it, we are getting back to our white layer, we are going then to
our color palette, and we will select
this white color. Let's just go and again, recreate the sheap
without any gaps. Again, if you want to
make a different shape or if it's not just repeating the way that you want
it to be repeated, you are welcome to create
a different shape. All that you need to do is
to create a closed line, and all that you need to do
is to create nice connections between your lines when you are connecting the beginning
and the end of the line. So when you have the
shape that you like, let just drag and
drop the color, and when you are done, let's again go to our layers, we will go to lay with the
yolk and we will create one more lay above that will
rename as facial features. Now, when we have
this new layer, we are going back to
our color palettes and let's select this
dark brown color. When you are done, let's first go to our slider with the size, and you can see I have this
little mark down here. You can just find the size
of the brush that you like. If you want to make sure that
you are going to be using the same size of the brush throughout the whole
illustrations, you can just go and save it. When you found the size of
the brush that you like, you can tap on this markdown what you have on your slider. You will have this
little window and you can just go and tap on plats. Now you can see we have this
markdown on our slider. If you want to go and change the size of your brush later on, you can see we have
this mark down. We can just go and very
easily tap on it and get back to the size of the
brush that we used before. Now, let's just go and start recreating these
elements, the eyebrows, and the little mouth, very
easily the same way as before, just using all the options
that we used before. When you are done
with these elements, let just go and
increase the size of our brush and we will put
the dots for our eyes. If it's not happening
from the first try, try it out one more time and position your elements nicely. When you are done
with this task, let's just go and add little
highlights to our eyes. We will use the same
white color and as we already have
it onto our screen, we can just go and
pick it from here. We will need to go and hold one of our fingers
on the screen. You will see we have
this little tool. We will just need
to have the color that we want on the top. You can see if you are moving
our color is changing. Let's just go to
this white color. When we have the white color
on the top of the tool, we will just rise it up. When we have it, let just go to the eyes and we will go
and put our highlights. For example, let's just
start from our left one, we will go to the top left and we will put a first
dot right here. We will do the same
on the opposite eye. Try to put it on the same line and on the same
distance from the edge. When you have the ice done, let's just go again to our color palettes and let's
select this pen cred color. With this color,
we will increase the size of our
brush and we will go underneath the ice
and we will put our little dots for the cheeks. Again, try out different
sizes for your brush. If you found something, let's just go and put
our dots for the cheeks. When we have our
cheeks like that, let's just go to our layers, and we'll hide our lier
with this cage just for 1 second by tapping on
this little window here. We will take a look
at our illustration from the distance,
and if you want, you can just go and
adjust some elements when you already have
them on your screen. For example, we can move this right keek a little
bit more toward the center, so it has the similar
position to what we have on our left.
What we need to do? We will need to go to
our S ribbon icon. On the bottom, we will
select free hand method. When we have this method, we will just go
along this elements. We will select it, we will
loop this whole shape around, and when only this
element is selected, we will then go
to our arrow key. Uniform method doing the
same thing as we did before, we are just moving our shape and finding a better
placement for it. When you found the
placement that you like, we will need to go to the
first icon that we used. It is our S ribbon icon. We will tap on it, and we
will deselect everything. When we did it, let's just zoom in our canvas
one more time, and then we'll go back to our color palette and
select the pink color. We will go and make the
size of the brush very small and we will go inside our cheeks and we will
add the lines like that. We will do it on
the other side too. When we have it, let's
continue working on our egg by going and adding
some shadows and highlights. Firstly, let's just go again to our layers and we will start
with our layer with white. We will select this layer and we will create one
more layer above. Let's rename this
layer as shadow. When we have this new layer, we want our shadows only
appear on the areas that we already have on
our previous layer onto this white elements. To do that, we will need
to go to this layer. We will tap on it and we
will choose clipping mask. Now, everything that we are
creating right here will appear only on the white areas
from the previous layer. That's exactly what we need, and when we have this layer, we will also need
to go and change the blending mode of it because
we are creating a shadow. We will tap on the
icon and we will find multiply blending mode from the least and it's for the opacity. Let's just go with
something like 30% for now. If it's too much or
if it's not enough, we can always get back to this option and we can adjust it. Now when we are done
with our layer, let just tap on it to
close this window, and then we will go to
our color palette and we will select this light
grayish orange color. We will then go and
adjust the size of our brush and we will go to
the bottom part of our egg, and we will start creating the shadow going here like that. When you have created
this element, let me just go manually to the bottom part and we
will recolor this area. When we have this first shadow, we will just go underneath our yoke and we will
recreate the shape here. Again, who in the
line at the end. If you need to adjust
it, go over the top to the 18 mode and
adjust the curvature. For now, we can say
that maybe we want to adjust the amount of
opacity for our shadow. Let's just go again
to our layers, we'll go to R with shadows. We'll tap on the icon and make the opacity a
little bit higher. For example, let's just go with 40% or something around 40%. When we are done with this part, let's just tap on
with the shadows, and then we will go and create one more layer that will
rename as highlights. When we did it, we will
tap on the layer and we will clip it to
our main white layer. Now, let just go to our icon and we will change
the blending mode to. For now, let's just
go with something around 50% of opacity. We will then go back to our color palettes and we
will select our white color, and we will go to the
opposite side from our shadow and we will create
a little highlight there. Let's just start from the
edge, and if you want, you can just go to
the mean shape and just create a few dots
for some highlights. If you want to
create some peculiar shapes for your highlights, you are welcome to
go and do that. When we are done
with the highlights, let's continue by
going to our layers, and we will go to
our next layer, which is our layer with yolk. Let's just create
one more lay above, let's rename it as shadow. Let's clean this lay
to a previous one. Let's just go to our icon and change the blending
motum multiply, and let just go with
40% of opacity for now. When we are done, going
back to our color palette, and we can decide what color we want to use for our shadow. We can go either with yellow, yellow orange or middle orange. Select one of these colors
and let's just go again to the same side where we have our main shadow on
the white area, and let's create a curve
going on the bottom part. The same way as before, we
can hold our Apple pencil. If we want to, we can go over the editon mode and adjust
the curvature from here. And when you are done, let
just tap on the screen and manually recolor the rest of the area that we
have on the bottom. If you think that maybe this shadow is a
little bit too bright, we can always get
back to our layers, go to R L with the shadow and adjust the
opacity from here. Something around
25% looks better. When we are done with it, let's just go tap on R with the shadow and create
one more layer above, that name as highlights. One more time, if you want, you can clean this lay to a
previous one, or for now, we can just keep it as
it is because we can just go inside the shape and add our highlights
in that way. Firstly, we will need to go to our icon and change the
blending mode to act. One more time, let's just go
with 50% of opacity for now. If we need to
adjust it later on, we will get back and adjust it. Color palettes, white color, go into the opposite
side from our shadow. Let's just go with
some peculiar shapes. For example, firstly, we'll go with a little
curve like that, and then we'll add a few dots. We can just go with
the same size of these dots or maybe make
it a little bit smaller. Okay. Create something
in that way, if you think that maybe the opacity of this
element is too much. Let's just get back to layers, we go to our A icon on L with highlights and let's adjust
the opacity from here. For example, 20% looks better. When we are done, we are almost done with this
whole illustration, but let's just go and add
some beautifications. We will go to our layer with
the white and we will go to our with highlight that is
connected to R with the white. From here, we will
create one more layer. If you want, you can rename
it as beautifications. What we need to do is
to go to these layers with white elements and we will need to
select all of them. When all three of these
layers are selected, we will hold them
and we will drag them above this
layer numbered sand, where we are going to be
creating our beautifications. When you did it, let's just
get back to this layer, and we will then go to our color palettes and we will select this dark purple color. We will go underneath our ag and we will create some
peculiar shape here. You can just go with some
simple shape of the circle or an lips or you can just go and create
something in that way. You can play around
with the sheep. A that we need to do is
again to create a close line and very smooth line that doesn't have anything like that. Let's just go and smoothen
up these elements, and let's just go and drag
and drop the color inside. Take a look at this
sheep from the distance. If you need to adjust something, let's just go and adjust it. When you are satisfied
with this element, let's then go and
select the white color. We can just pick it
from our elements on our egg When we have
this white color, let's just go along this darker sheep and let's
create some highlights here. What we are going to
be doing is creating some little sparkles
going in that way. When you have the first sparkle, let's just go and create
two more on other sides. If you want, you can just go and adjust the size
of your brush. If you want to create some other elements for
your highlights, maybe some dots or
something different, you are always welcome
to go and do that. Try not to overdo it
and try not to add too many on these elements
just a few is enough. When you are done with
these highlights, we are done with
this illustration. Let's move on to
our next part where we are going to be
recreating our juice.
4. Juice: Let's begin this fight firstly
by going to our layers. We will go to our
group with the egg. We will tap on this
little V icon, and we'll collapse our group. Then we will unhide our
layer with this gauge and we'll create one more layer
above our group with the egg. Let's rename this
layer as books. When we did it, let's then use one option
that Procreate has, that will make our illustration
a little bit nicer. What we need to do is to
go to our range icon, we will go under Canvas, and here we will
toggle drawing guide. You can see now we
have the cells. That's the option that we need, but we will need to
toggle one more option. Let's just go to
added drawing guide. On the bottom, you can see we have the option
assisted drawing. Let's just tap on it and let
it down over our top right. Now, let's just go to our color palettes and select
this middle orange color. With this color, we will go and recreate the lines that we
have for the whole box. Let's just go again
to our brush. We will go to the size of the brush that we have
marked down right here. You can see when we are using our method that
we are using right now, our assisted drawing, we can
create the straight lines. Let's just go and recreate
them going in that way. So start from the lines
that you have outside, and when you reached this part, let's just go and create the
line going up in that way. We will hold it and just
connect it with our ship. When you have it right here, we will do the same on the top. If you have some parts
that you need to adjust, let's just go and adjust it. When we are in the editing mode, we can also go and make sure that these two lines
are parallel to one another, just by moving this line down and adjusting the
direction of this line. Try to make these two lines
parallel and when you have this line parallel
that you just moved, let's just move it
back to the top. When you are done, let's
just tap on our screen, get away from our editing mode, and let just drag and
drop the color inside. When we did it, we will then
go to our layers and we will create one more layer about this layer
with the main box. All that we need to
do is to recreate this part that we have in front. Let us go to this layer and we will rename this
layer as front. We also will need to use this assisted drawing
on this layer. What we need to do is
to go to this layer, tap on it, and choose drawing
assist from the list. When we did it, we
will then go to our color palettes and we will select this yellow orange color. Now, let's just go and recreate these lines
that we have in front. For now, you can just
go elsewhere beyond the frames, create the shape, connect it nicely, make it without any gaps and then drag
and drop the color inside. When we did it, let's just go to our layers and we will go
to this layer with front. We will tap on it, and we
will choose clipping mask. Now, everything
is neat and nice. The next thing that we
will need to do is to add the lines for these
additional elements here. Firstly, let's just go and
create one more layer. If you want, you can go
and rename it as lines. Also, while we are still
here into our layers, let's select all three of these layers and let's
put them in the group. Let's rename this
layer as juice. Now, getting back to our lines, one more time, if you want, you can just go
straight to this layer, tap on it, and choose
drawing *** from the list. Then go again to this layer
and choose clipping mask. What we need to do
next is to go to our color palettes and
select this orange color. When we did it, we
will just go and recreate these elements
that we have on top. You can just go and
create a straight line. If you want, you can just go to this middle part right here and create another
straight line here. The same way, we will
make this line that we have on the intersection
between two faces. We will do the same thing. Again, we will just
create the line, will hold it at the end, and we will adjust the
rotation of this line. We will then go to our editing
mode and we will make sure that this line is parallel to the line that we
have on the bottom. If we need to adjust something, we will just go and adjust it, and then we'll just
move it to the top. When you have it in that way, let's just tap on the screen. Let's just go against
our lies and we will hide our with the sage to check
out how everything looks. If we are satisfied
with everything here, we will then go and
create the straw that we had here because we can
use our straight lines. What we need to do
is to unhide our with the sage and
create one more on top. Let's rename it as straw. When we did it, we will tap on this layer and we will
choose drawing assist. When we did it, we will get back to color palettes and let's select either light greyish
orange or white color. With this one color, we will just go to
the top and we will recreate these two lines
that we have here. These two lines, the rest
of them that we have, we will recreate manually. Now we are taking a look
at everything here. If we don't want to
adjust anything, we will go and turn off
our assisted drawing. Let's firstly go
to our range icon, we'll go to the canvas, we
will go to our drawing guide, we'll toggle it from here. Then we will need to get
back to our list and we will need to toggle assisted drawing
from all of these layers. We will need to turn it off. Let me just start
from the straw, we will tap on this layer, we will choose drawing
assist from the list. We will do the same with
the rest of the layers. Now, let go and continue
creating our straw. Let's just go, zoom
in our canvas. We'll get back to
e with a straw, and we will go and create two parallel lines that
we have on our skitch. Let's connect them nicely
on the top with the curve, hold this curve at the ends, go to the editing mode, if you need to go to the eraser, if you have the parts
that you need to erase and make this straw very
cute and very nice. When you did it, we will
create the curves right here on the left and
right here on the bottom. Then when you are done
with these lines, let's just drag and
drop the color, and then we'll get
back to our layers, we will hide our
la with this sage, and if we have some
areas that we need to ease or adjust in any way. Let's just go spend some
time here and adjust them. Now, when you are
done with this straw, let's just take a look at
everything that we have here and let's adjust our
shape a little bit. What we need to do is to
go to this box layer. We will grab our eraser and if we have some areas like that, for example, we can just
go and make them nice. We'll just go and erase
these little parts. If you want to adjust
something else, you are welcome to
go and do that. For example, we can just
go to with the lines, and we can go and make some gaps into these lines to make
them look more interesting. For example, let's just go to this line that we have
right here on this side. Let's just go and create
a little gap like that. We are just cutting the line trying to make the
cut very smooth and very nice and we will just go to the opposite side and we
will create a cut here too. If you don't want to do that, you are welcome to
keep it as it is. Let's just go now through
all of the lines that we have here and if you want
to create these little gaps, let's just go and create
these little gaps. When we did it, let's just
go again to our list, we will unhide with this sketch, and let's just go and recreate
this element right here. What we need to do is to go to either with the lines or with front and create one more above. Let's rename it as white. Let's clean this led to a previous one select
and clipping mask. If we want to create this
element only on the front part, Let's just go to R with
front, we'll select it. We'll tap on it, and we will
choose select from the list. Now we are going to be adding the details only on
the selected area. Now, we are going
back to our layers, we are going to our
lier with white. Let's just go, grab our brush, and we will recreate this element that
we have right here. Let's loop the
whole shape around, and when you are done, we will just drag and drop
the color inside. When we did it, we can deselect everything by heating
our S ribbon icon. Now, when we did this white
parts, let's one more time, go to our lease and let's create another le that will
rename as label. If you want, you can
clean this led to a previous one or you
can keep it as it is, for this part, let's
start by going to our color palettes and we will select this yellow green color. We will recolor these
little elements that we have for our leaves. When you have the leaves, let's just go again
to our color palette, and we will select
this orange color. L just make the size
of our brush very big and we will just go and recreate this part
just with one line. If it's not happening
from the first try, try it out one more time, make the size of the
brush even bigger. Try to make this line straight. To make the line
straight, you can hold one of your
fingers on the screen, and you will see that you are just creating a
very straight line. When you did it,
let's just go over the top and let's
adjust this shape, make it a little bit smaller
and position it differently. Try to position it right in
the middle of your shape. Take a look at it
from the distance if you need to
when you are done, let's just tap on the screen and let go inside and
recreate this font. For example, let's just go with the same white color or
light greyish orange. Let's make the size of
the brush smaller and just menu let go and
recreate the text. Okay. When you are
done with this task, let's just get back
to our layers, we will go to our
layer with the straw, and we will just go and end
the details to this layer. We will just go to this layer, we will tap on it, and we
will choose Alpha log. Now you can see we have the checkerboard around
this element. That's exactly what we need. We will then go to our
color palette and we will select either light
grayish orange color or any other color
that you like. For example, you can
use egg shell color. When you have this color set, just go to this
middle part and we will create a few lines
going in that way. When you have it, we will also go to this part that
we have on the left, and we will recreate the
shape of the ellipse. Now we will go to our
layers and we will tap on the plus icon
to create a new layer. We will tap on the layer
and we will choose. We will rename this layer
as facial features. When we did it, we
will get back to our color palettes and we will use the same color
that we used before, either dark red or dark brown, and we will just go and
recreate our facial features. Let's just start from our
eyebrows and our little mouth. When you are done,
increasing the size of our brush and putting
dots for our ice. When you are done with the ice, let just take a look at our illustration without
the lines for this she, so just hide in them. If you need to adjust something here, you know
what you need to do. You will need to
select your elements, go down to your arrow key and adjust your placement or anything that you
want to adjust here. When you are done adjusting it, let's select the white color, so we will just pick it from
our part on the bottom. We will go and decrease
the size of our brush and we will go and put
our little highlights. When we did it, we are going
back to our color palettes, we will select the pin cd color. We will go and increase
the size of our brush. We will then go underneath our eyes and we will
put our little cheeks. When you are done, let just get back to our color palette, select the pin color, make the size of
the brush smaller, and we will go inside the cheeks and we will put our
little lines here. When we are done
with these parts, let them go and start adding
our shadows and highlights. Firstly, we are going
back to our layers, and we will start by going
to our layer with white. From here, we will just go
and create one more layer. We will rename
this la as shadow. Again, let us clean this
la to a previous one. Let us go to our icon and change the blending
mode to multiply. Again, go with something
like 30 or 40% for now. Then let's then go
and start creating the shadow only on this area that we have
right here on the main box. We will go to this layer. We will tap on it and
we will choose select. When we did it, we are
going back to our shadows, we are going back to
our color palettes and you can select
either yellow orange, middle orange, or orange. Select one of these colors and let's just go to
one on the side. For example, right
here on our left. Let's just go and start creating the shadow
going in that way. If this is too much, we can just go to our layers. We will go to our icon and adjust the opacity
to our lichens. Around 20% will work better. You can see that now we have this shadow going
to this front part. We don't need it. We can
just go to our front layer, tap on it, and choose
select right here. Now, we will then
go to our layers. We'll go to our layer
with the shadow. We'll tap on our eraser, and we will just go along these parts that we don't
need, and we will ease that. Now, when this part is selected, we will go again to
our with the shadows. We will go to our
color palettes and we will select light
grayish orange color. We will go to the opposite side. We will go to this
area that we have right here onto our white part. We'll create the first
curve and then we'll create the shadow going
manually in that way. If this is not enough, we can go to our magic
Quanzu hue saturation, and brightness and adjust the brightness right
here on the slider. You can see we are changing
the shadow only on this area. If you want, you can try out
different slider saturation, maybe hue If you found something different that
is working for you, you are welcome to
keep it as it is. When we are done with it, let's just go and deselect everything by hitting
our S ribbon icon. Now, when we are done
with these two shadows, we are done with the
shadows completely. Let them go and create a little
layer for our highlights. We will go again above our
layer with the shadows. We'll tap on the plus icon. Let's tap on this new layer. Let's rename it as highlights. If you want, you can clean
this layer to a previous one, or if you don't, you
can keep it as it is. Let's then go to our icon and change the blending mode to. Again, let's go with something like 25% for our highlights. We are using our white color
or our light grayish orange. It's up to you which
color you want, and we'll go to
the opposite sides and we will start
creating our highlights. Firstly, let's just go and decrease the size of our brush. We will go over the top. We will create a few
highlights like that. If you want to create
different highlights, you are welcome to
go and do that. If you feel that
maybe the amount of highlights is too
much of opacity, you can just go to
your highlights later, go into the A icon and adjust
the opacity to your lichen. Okay. When you are done with it, we are done with
this illustration, but we will need to go and add this additional element that
we have on the backgrounds. What we need to do is to
go again to our layers. We will go to our layer with shadows that is clipped to
our layer with the box, and we will just create
one more layer here. If you want to rename
it, go and rename it, all that we need to
do next is to select all of these layers
that belong to our box, and then we will drag them up above this new layer number 21. When you are done, we are
going back to this new layer. We are going back to
our color palette, select dark purple color, and we will just go and create some pecular shape
for our background. So let them go and
create the shape. When you are done
with the outline, dragon drome the color, take a look at what you have here if you need to
adjust something or not. If you need to go and adjust it, when you are done, we will grab the white color and
add the highlights. When you are done
with the highlights, we are done with
this illustration. But if you want to rotate
it or make it smaller, we can go to our layers. We can go to our layer with the juice our group
with the juice. We can collapse it firstly and then we can just
go to our er key, rotate it, make it smaller, do whatever you want to
do with this element. Find the position that you
liked and when you did it, we can move on to our next part, where we are going to
be recreating our cup.
5. Coffee: Let's begin this part. Firstly
by going to our layers, we will unhide our
layer with the skitch. We will create one more layer above our group with the juice. So let's just tap on it, and let's rename it as lead. Now, let's go to
our color palettes and select the next color. Let's select the line
grayish orange color, and we will start by recreating
the shape on the top. Let's just go and create the
shape just with one line. We will hold it in the end. If we need to adjust it, we will go to our editing
mode and adjust it from here. When you are done,
let just tap on the screen and let just
add the color inside. When we did it, we will go to our layers and we will
make a copy of this layer. Let's just swipe the layer from right to left and
choose duplicate. When we did it, we will
go to our color palette, we will select white color, and we will drag
it to this area. When we have it, we will
then go to our arrow key. We will use our
uniform method and we will make this shape
a little bit smaller, so we can put it right
here in the middle. If you want to recreate the
shape from your skitch, we can use the free
for methods and we can adjust it with
our free for methods. You can just go to the sides and you can freely adjust them so they will match that what
you have onto your skitch. When you are done, let's select everything by hitting
our arrow key, and then let's go to our layers. We will go to this layer
with the lead on the top, and we will add a different
color right here on the top. We will go to this layer. We will tap on it and we
will choose Alpha lock. We will go again to
our color palette. We can select either
pale B or egg shells. Select one of these colors. You can try it out, and
then we will go over the top and we will create
this little part right here. Just recreating the curve. It will add a little bit
of depth to this part. If you want, you
can take a look at it without the
lines on the skage. If you don't like it, you will just need to try
it out one more time. When you have this
line, one more time, let's just take a look at it without the lines on the skate. P Bach works better, let's keep it as P Bach. When we have it in that way, let's continue by hiding our layer with the
sketch firstly, and then we will go and select both of these
layers for our lead, and we will group them and we'll rename the group as c. Now, let's go to our er with the lead and from here we will
create one more layer. We will drag this layer
underneath our lead, but it'll be easier
for us to go to the layer with the
lead and drag it up. So then we will go back
to this new layer and we can rename it as lit again or we can just
keep it as it is. When we have this layer, we will need to go back
to our color palette, select the white color, and we will go and recreate this whole area
that we have right here for the bottom
part of the lite. When we are this new layer, let's just use one option
that Procreate has that will help us to create the sides
equal to one another. It is our symmetry drawing. What we need to do is to
go to our range icon. Again, we're going under
our drawing guide, and this is not the
option that we need. We will go to our
80 drawing guide and we'll go under symmetry. You can see now we have
just one line and we will need to put this line right
in the middle of our she. Let's go to this node that
is blue one and we will just drag it to the place that is supposed to be a
center of our cap. When you have it in that way, let just tap down
over our top right, and then we will just go to one of the sides
and everything that we are creating
here you will see is mirrored on
the opposite side. Very easily, let's just
go to the top to one of the sides and let's
recreate these elements. Connects the shape
nicely in the middle. And when you have it,
we will need to go over the top and we will need to
close the shape here too, so we can just go and drag
and drop the color inside. Now, when we have this
shape for our lead, let's then go and recreate
the body of our cup. We will go again to our layers. We are not turning off
assisted from here. We will just go and
create one more layer. Let's just tap one the
plus icon, and again, we'll drag this layer underneath our layer that is number 25. Or you can see that now we
have it outside the cup group, so we can just go
and for example, drag our layer 25
above our layer 26, so it is all stays
inside the group. Now, we are going
to this new layer and we can rename
this layer as body. Let's then go to this layer. We will tap on it, and we
will choose drawing assist. When we did it, we will go
to our color palettes and let's select the
same yellow color that we used for our yolk. When we have it, we
will then go and recreate the shape that we
have for the body of our cup. The same way as before, just starting by creating the line on one of the sides and then connecting it
nicely on the bota. When we have the
line on the bottom, we will need to
close the shape on the top and then drag and
drop the color inside. When we did it, we will need to recreate this label parts. Again, we are going
to our layers. We are creating one more layer above our lay with the body, we will rename it as label. Then we will go again
to our color palette and we will select this p color. With this color, we will go and recolor this little parts. First thing that we need to do is to go back to our layers, go to our layer with the label. We will need to
tap on it, and we will need to choose drawing as. The same way as before, just
recreating these parts. Drag and draw the color inside, and when you are done, we don't need our
assisted drawing anymore, or we don't need
this option anymore. What we need to do
is to go firstly to our range icon and who will toggle drawing
guide from here. Then we will go again to our layers and we
will go through all these layers that has this little title assisted
and who will turn it off. Type in on the layer and choose a drawing assist from the list. Now, we will use the option of drawing assist on
a separate layer. We will then go to
our lay with label. We will create one
more layer above, and we will renew
this layer as lines. We will go back again
to our range icon. We will go to drawing guide
here, we will toggle it. We will use our added
drawing guide option and we will get back
to our two D grites. We will toggle drawing
assist from here, we will he done
when we are done. We will go back to
our color palettes and we will select
this base color. With the beige color,
we will go and create the lines
going in that way. Just going through the cells and creating the
lines going down. When we have the lines
that are going through the whole shape of
our label part. Let's then go again
to our range icon. We will toggle
drawing guide here. We will go again to our layers, we will turn off assisted
manually from this layer. When we have the lines, we will then go
to our arrow key, and we will go to the option
distort, one more time. We are then going to the edges to our corners
that we have on the bottom, and we are moving them
toward the center. We have this nice
pattern on our cp. When we have them in that way, we will deselect everything
by hitting our error key, and then we will go again to R s and we will go
to with the lines, tap on it, and we will
choose clipping mask. Now, everything that we have is appearing only on the label. Again, if you have some elements
that you want to adjust, you can go again
to your error key, go to the distorted option
and adjust it if you need to. When you have the
lines that you like, we will need to go and
add a bit of shadows. But firstly, let's just go to our lead and we will recolor
this part right here. We will go to our layers. We will find this
layer with the lead. It is our layer number 25. You can just make sure that
you're on the right layer by going to this little
check mark, taping it. If it's hiding, you are
on the right layer. When we add here, we will
create one more layer above. We will clean this layer
to the previous one. We will use the same
normal blending mode. We will go back to our
color palettes and select the light
grayish orange color. We will go and increase
the size of our brush, and we will go through this area and we will
create a curve here. Try to make it the same way as you have it onto your skage. If you don't believe it, if you want to make sure that you are doing everything right, you can just go to, you can hide your leer with the skage and try it out one more time. When you're satisfied
with everything here, let's just get away from our editing mode by
typing on the screen, and then we will go and add
our facial features firstly. Firstly, let's just get
back to our layers, we will unhide our
layer with this sketch. We will go above our layer
with this little lead. We'll create one
more layer here. Let's rename it as
facial features. Then one more time, we're going back to our
color palettes and selecting the same color that we used for our facial features, and we will then go
and recreate them. When we have all the lines done, let's just get back
to our color palettes and let's select
our pin red color. With this color, we will drag it to this place that
we have right here, and we also will go and put
our cheeks with the dots. When we have the cheeks, let them go to our liars, we will hide our
liar with this cage, we'll take a look
at everything here, and we also will go back
to our color palettes. We will select our
pin color and we will add the lines
to our cheeks. When we have it in that way, let's then go and add
some little shadows. Firstly, we are going
back to our layers and we will go to with
the body firstly. Let's create one more lay above. Let's rename it as shadows. Let's clean this late
to a previous one. Let's go to our icon, change the blending
mode to multiply. Let's go with something like
30 or 40% for our opacity. When we did it, going back to our color palettes and
selecting either yellow, yellow orange or
middle orange color. When you have the
color selected, let's first go underneath our lit and we will just
recreate the shape here. Hold your curve. If you need to go to the editing
mode, adjusted, if you want to make it bigger, then go to this area
that you have on top and recolor it manually. Also, let's then go
to one of the sides. For example, two right one and we will create a curve
going down in that way. We will recolor the rest
of the area manually, and then we will go
to the bottom and we will end the shadow underneath
this label or holder part. We will just recreate
it with the curve, and then we will go and create a curve going
down in that way. Connect it nicely with the
curve that you have on top and then manually recolor
the rest of the area. If you think that this amount
of opacity is too much, let's just go to our icon
and adjust it from here. When you are done, let's
then go and tap on the plus icon to create a
layer for our highlights. Again, if you want,
you can clip it to the previous layer or you
can keep it as it is. Then let's go to our icon and change
the blending mode to. Let's go with 25% of opacity, going with our white color, going to the opposite sides and adding some highlights
to these areas. If 25% are too much, we can go back to our lis and adjust the amount of
percent from here. When we are done with this,
let's then go to our liberal. We will go above our li with the lines and
create one more li. Let's rename it as shadows. Let's clip it to a previous one. Go into our icon, changing the blending
mode to multiply, go in with 30 or 40%, going back to our color
palettes and selecting either pale beach base
or egg shell color. Select one of these
colors and let's go to the bottom right part and create a b curve
going in that way. Let's connect it nicely with the curve of the
shadow on the top, and then we will manually go and recolor the rest of the area. If you want to adjust the
percentage of the opacity, you are welcome to
go and do that. Also, if you notice that you have some elements
that you need to adjust. For example, right here that we have this little label
going to the cp, we can always go to
the needed layer. In that case, it is
our layer with label. We can grab our araser and raise the parts
that we don't need. When you are done
with this task, we are done with our main shape. All that we need to
do is to go and add the additional elements
underneath our cup. Firstly, let's go to our layers. We will go to our group with the cup, we
will collapse it. We will make this
whole illustration a little bit smaller and
position it differently. Firstly, let's just go to
our one of the corners. We are using uniform
method right now. So let's go and adjust
the size of the elements. If you want to
adjust the rotation or position of your elements, go and adjust it. When you found what
you are looking for, let's deselect pin and
let's go to our layers. We will unhide our
group with a cup. We will go to our layer with
shadows on our body layer. We will create one
more layer here. We will then go to
these two layers. We will select them and we will drag them higher
than our new layer. Going back to our new layer. Go back to our color palettes, going to the dark purple color, and just go behind these elements and creating
some peculiar shape. Close it, make a nice connection between the end and the
beginning of this line. If you need to adjust
something, adjust it, go then and drag and
drop the color inside, and then let's go and select the white color
and add our highlights. When you are done,
one more time, let's go to our layers. We will collapse our
group with the cup. If you want to
change the placement of this whole element, you are welcome to go and find a better placement
for it, for example. When you're satisfied
with everything here, let's move on to our next part, where we'll recreate our second.
6. Eggcup: Let's begin this part firstly
by going to our layers, and we will unhide our
layer with this kitch. Let's create one more layer, let's rename it as egg. Then let's go and recreate
the shape that we have for the whole shape that we have on the
top for our egg, and we will do it with the color with the
name egg shells. Let's go and very easily
recreate the lines here. If you want, you can use the
option symmetry drawing. Let's go and select it. We will go to our range icon, going under Canvas, going in
and selecting drawing guide. Go to eight drawing guide, going under symmetry and moving
the symmetry line to our. Go right in the center, trying very hard to put it right in the center
and when we have it, just heating down
over our top price. Let's make sure that
our layer is assisted. When we have it, let's
just go and recreate this. When we have this shape done, let's go and drag and
drop the color inside, and we will go and recolor
this part on the top. Firstly, go into our layers, go into our layer with the egg, taping inate and
select an alpha lock. We will go back to
our color palette, select the white color, and we will go above
this element right here, and we will recolor
this top part. When you are done,
let's go back to our layers and we will
create one more layer above. We will go and recreate
this part inside, so we will just put an egg here. We will go back to
our color palette. We will use either
yellow, yellow orange, middle orange, any
color that you would want to see for your yolk here. Let's select the color and let's recreate this
part right here. We will first go to our lit and we'll clip this lier
to our previous one. Typing and select
and clip in mask. Now, just go in there and
recreating these parts, creating our little
elements for our egg, and then go to the top and recreating the rest
of the elements. Now, take a look at it without
the lines on the skitch. If you like it, we
can keep it as it is. If you want to change
the color of your yolk, you are welcome to go back
to your color palettes, select another color and drag it to this
area, for example. When we are done
with these parts, let's again go back
to our layers. We will unhide our
with this sage and we will recreate
this bottom elements. One more time, we firstly
will go to with the egg. We will tap on it and we will
turn off drawing assist, and then we will go
above this layer where we have our yoke and we will
create one more layer above. Let's rename it as bottom. Let's then go and select
all of our layers. We will put them in a group
and you can rename it as second egg or any kind of egg
that you want to add here. Let's just go and
rein in this layer. Now, we will go to
these two layers, the layers that
belong to our egg, and we will drag them higher
than with the bottom. We will then go to R
L with the bottom. We will tap on it and we will choose drawing assist
from the least. Then we will go back to
our color palettes and we will select white or
light greh orange color. Or if you want to experiment, you can just pick any
other color that you like. We will go and recreate these parts that we
have for the bottom. Again, using our
assisted drawing, so it will be easier for us
to recreate our elements. You can see we don't have
this line on the top because we will need to put
the egg inside the shape. We will just need to
go back to our layers. We will grab our bottom layer and we will put it
higher than our egg. We don't need it to be clipped, so we will tap on it and we will choose clipping
mask from the list. We will then go and
adjust our shape, so we don't have any
gaps right here. We will just create a
nice and smooth curve. When you are done, let's just drag and drop the color inside. Let's take a look at everything
without our lines of the skeech and adjust
our lines if we need to. Grab the razor, or if you
want to work with a brush, you are welcome to go
and work with a brush. Let's just go and create
the very smooth lights. Also, we will just go to
the little parts right here and create a little
element here too. When we are done, let's
go back to our layers. We'll unhide our layer
with this sketch. We will go to the layer bottom. We will tap on it, we will
turn off assisted drawing. We will go back to
our range icon. We will togal drawing
guide from here. Now, let's go and recreate
our facial features. Let's go back to our las. We'll create one more layer on top of our layer with bottom. We will rename this layer
as facial features. We will then go to
our color palettes and select the same color
that we used before, and let's very easily go and recreate our
facial features. When you are done
with the lines, let's get back to
our color palette, select pin cred color, and let's drag the
color inside the mouth. And also, we will put
our dots for the cheeks. When you are done, let's
get back to our liars, hide the lier with the sketch, go back to our color palettes
and select the pin color. Let's add our lines
inside the cheeks. Okay. Now, let's go and add little highlights
and little shadows. Firstly, we will
go to our layers, we will go to our egg. We will go above our
layer with this yolk. Also, if you want, you can go
and work more on the shape. It is not just dripping
out of your egg. You can go to this
little part and you can hide these little
elements on the sides. We can go to this part
where we have our yolk. We will tap on it and we
will choose Alpha log. We will select either white
color or the egg shell color, and we will go to the sides from our yolk and we will make the
shape a little bit better. So when you have the curve
like that on one side, let's do the same on
the opposite side. Okay. When we are done
with this element, let's get back to our layers, we will create one more
layer above this layer. Typing on the plus icon and renaming this layer as shadow. Let's clean this layer, clipping mask, going icon, going into our multiply
blending mode, changing the opacity to
something like 30 or 40%. When we did it, going back to our color palettes
and selecting again, either egg shell, pale B, B, one of these
colors. Select them. When you are done with
selecting your color, let's just go to the
bottom right part, and let's create the first
curve going in that way. Adjust it through your
editing mode if you need to, and then let's go to the bottom part and
manually recover this area. Okay. When we are done
with this element, let's go to our layers. Let's create one more layer. Let's rename it as highlights. If you want you can
clip this layer or if you are ready to work
onto your highlights, let's just go to our icon. Change the blanket mode to add, go to the opacity of
something like 30%, maybe a little bit less. Going back to our color palettes and selecting white color. Let's go to the
opposite side from our shadow and let's
add a few highlights. If you feel that it's too much, let's go back to our layers. We will go to our A icon on the highlights layer
and add the opacity. Also, we can go with these
highlights to our yolk. So let's just go and add a few dots or maybe
some sparkles there. When we are done with this task, let's go to our
layers one more time, going into our bottom part, creating one more lay here, renaming it as shadow. Let's clean this lay
to a previous one, then go into our icon, changing blending
mode to multiply. Go into the opacity of
something around 30 or 40%. When we are done, going
back to our color palette, selecting light
grayish orange color. Again, going to the same side
where we have our shadow on the egg and going along the whole element here
and aid in shadow. Let's go to the bottom two, and let's just recreate
the shape here. If you feel that you want to adjust the opacity
of this element, you are welcome to go and
adjust it to your lichen. If you want you can
add some highlights here on this white color. If you don't want
to change anything, let's go back to
our bottom part. We will go to our layer
with shadows on our egg. We'll create one
more layer here. We will select all three
layers that belong to our egg. We will drag them higher
than our new layer. We will go to this new layer. We will go back to
our color palette, we'll select dark purple color, and we will create
some peculiar shape for these elements. Close the shape, make
it nice and smooth. If you need to adjust something, go and adjust it, and then let's go and
add the highlights. Firstly, selecting
our white color from our screen and then just going and adding a few
of these elements. When you are done,
adding your highlights, let's get back to our layers. We will collapse our
group with second act, and we will go to our
arrow key to find maybe a better placement or rotation or size for these elements. Play rounds with it, and when you are done, we are done with our class. Thank you for
watching this class, review if you liked
it and consider subscribing for more Calive
videos in the future. Looking forward to
seeing your projects.
Uni Corn, ⭐Kawaii Art Enthusiast⭐
