Cute Characters: Kawaii Halloween Sweets | Procreate

1. Introduction : Hello everyone. I'm uni and e to this class we'll draw cute Halloween sweets. These class doesn't require any prior experience or a fancy tools. We'll start from scratch and we'll be using simple techniques throughout the process. Everything you'll see will be happening in Procreate. However, if you have other software or wanted to try a traditional materials, you are welcome to join if you are ready to start, Let's jump right into it. 2. Cat Lollipop Sketch: Let's start our class by deciding what kind of Canvas we are gonna be using. You can see it is a very simple square canvas because both the width and pixel height, or 2048 big sets, if you would like to use any other dimensions for your canvas, just go for it. S for DPI, we are at 300 and S for the color profile, we are using sRGB with this low number. When it's all done, let's hit Done and will be redirected to our new canvas. And now we need to decide what kind of colors where I'm going to be using throughout the whole class. You can go to the project and Raza receptor. You can download the color palette and you can follow along when you did it. Let's go strictly to our color palettes and we will check out what we have here. And here we have two options of how we can use these colors. They come back to you and the cards, we will be using the cards because they have all the colors, names and they are ready for you to be used. And our first task for today is to change the background color. So let's do the following. Let's go to our layers. Let's go to our background color layer. We will tap on it to select. Here we have our color palettes on the bottom, and we will select the first color in the first row. So let just tap on it. And when we did it, we have changed the background color. And now before it starts in gradient our sketch, we will need to make some preparation tips. Firstly, we will need to go and select a brush. Let's just go to our brush library. So we are going to this little icon on the top right, and we will go to this kitchen folder. In the sketching folder, we will select procreate pencil if you would like to use any other brush for sketching part, you are welcome to do it. When we have the brush, we will need to select the color. So let us get back to our color palettes and who will select the color with the name sketch? Let's tap on it to select when we have it, we are ready to go and we are ready to start our sketch. Let's start by creating a lollipop. So firstly, we will go to our Canvas, we will zoom it in and we will start by creating a simple shape of the circle. So let's just go to our Canvas and with one line without an holding our Apple pencil, we will create this shape. Let's just go and try to do that. At the end of the line, we will hold our Apple Pencil and we will see that we snapped this shape to a perfect one. Now it is analogous, but we will need a perfectly round circle. So what we need to do without an holding our Apple pencil, we will need to hold one of our fingers on the screen. And now you can see that you have a perfect shape of this circle. If you move your Apple pencil from side to side without an holding, everything that you are holding right now, you will be scaling it up and down. So for now let's just leave it at something not too big, not too small. And when you are done, we will unfold everything that we are holding right now. When we had the first shape, we will need to create the same shape, but we will need to make it a little bit smaller and put it inside this first shape. So let's just go and do the same thing as we did before. So we won't go inside of the shape and we will repeat it there. Ledger step a little bit from the sides. And the same way as before, we are just creating the sheep without an holding our Apple Pencil. So we are doing it just with one line. And again, on this line we are holding our Apple pencil to snap it to an ellipse. And also we will need to hold one of our fingers on the screen to snap to a perfectly round circle. Now we can adjust this size on this element by moving our Apple pencil from side to side so you can play with it. And when you are done playing, alleges go over the top to edit shape. Here you can see that we have some nodes and if we go to them, we can tweak the shape and we can adjust it. But we want me to do that because we need to keep the same shape that we have right now, the perfectly round circle, but we will need to move it more toward the center. So what we need to do to do so, we will need to go to any blank space onto our canvas. We will hold our Apple pencil there and we will move it until we reach this central part. When you are done, we will tap on the screen with one of our fingers or with our Apple pencil to get away from this editing mode. And when we have these shapes, we will need to continue adding the details. But before starting, we will need to find an approximate center. And we will do it by creating one vertical line and one horizontal. We don't need to be very precise. We just need to find this approximate center. So firstly, let's just go over the top a little bit above are cheap and we will create a straight line going down. Hold your line and the answer snippets to a straight line. If you need to adjust the angle without an holding your Apple pencil, just move it until you find the angle that you need. And if you need to adjust it even more, we can go over the top to Edit Shape and e.g. we can move this line more toward the center. When you are done, ledgers tap on the screen and we will do the same thing, but this time with the horizontal axis. So let just go to one of the sides and let's create a straight line. When we have this line, hold it at the end, adjust the angle. If you need to move it, go over it, it's up to Edit Shape. Find the approximate center. And when you are done, let just tap on the screen. And when we have these approximate central lines, we will need to add two more lines that will go diagonally up. So firstly, we will go to this intersection. And from this intersection we will create these two lines that are going in different directions. So firstly, let's just zoom in our Canvas and we will start from the left part. We will go to this intersection and we will create the line like that. It is approximately 45 degrees when we have it on one side, Let's try to repeat it on the opposite side. One more time. We are going to this intersection and we are trying to create the same line but mirroring it from opposite sex when we have it led, just deselect everything by holding our Apple Pencil. And when we have this, we also will go a little bit above our shape, the main shape of the hat right here, and we will create another horizontal lines. So let's just add just a little bit from the top part, we can mark down a little element right here on this line that is going vertically. Through this mark, we will create a horizontal line where I just go and try to do that. Adjust the angle. If you need to move it, we will go forward. It's up to Edit Shape Layer. Just put it onto this little mark. And when we have this scheme, we are ready to add the ears. We will give it to these areas and we will be creating the ears right here. So firstly, let's just go over our left part. These horizontal line that we just created will be the top part where the ear ends. And this line that we have right here, the diagonal line, it will be right in the middle of the ear. So what we need to do firstly, we will go to the line that we have for our heads. And from it, we will create a very soft triangle. We will need to make it this way. So this line which is diagonal will be right in the middle of it. So let's just try it out. We are creating just a curve and end the end. We can always hold it to create a better curve. And if we need to adjust it, we are going orbital up to Edit Shape. We can tweak these nodes to adjust them and we can find what works for us. When we have this first year. We will need to do the same thing on the opposite side. So let's just go there and we will try to recreate what we have over our left parts. Jazz create the curve, hold it at the end, adjusted by going over the top to Edit Shape. Play around with these little nodes and try to make these shapes similar to what you have over the left part. And when you are done with this task, when you are satisfied with the result, Let's just tap on the screen. And now we will go inside of this ears and we will add the inner parts. So the same way as before, we are just going inside of the shape and we are repeating this beak shape but creating a little one. Create the curve. Hold it at the end, adjusted if you need to buy going forward it's up to Edit Shape. When you have it on one side leg, just tap on the screen to get away from our editing mode. And let's move on to the opposite side and we will try to repeat it there. And when you are done adding the inner parts of the ears, we will go over the bottom part and we will create a little wrap here. So what we need to do, firstly, we will need to go over our left part and we will make a little mark like that. When we have it on the left, we will go over the right part and we will try to keep the same distance. And we will try to put another mark here. When we have something like that, we will go over the bottom and we will create two lines like that. One on the left and one on the right. When you have it, we will go over the bottom part and we will create a wavy line. You can play around with its size. You can play around with this waviness. And when you are done, we will need to go and make it more like a wrap. So we will go over all of these concaved parts and we will make the lines going from them up. And when you have something like that, we can continue by going down and by creating a stick. So we will need just to step a little bit from this line that is going through the center. And we will just repeat it by stepping a little bit from it. Going down. When you have something like that, when you have the line, you can hold it at the end. So just remember it. You can go over the top to edit shape to adjust it. So e.g. you can move it more close to this line that is going for this center. And when you have it on one side, we will need to repeat it on the opposite side. So let just tap Elizabeth from the central line and we will create another straight line going down if we need to adjust it where I go in over the top to edit shape. When you have it, we will go over the bottom part and we will connect these two lines with a curve. And when we have the base for our lollipop, we are ready to go and add the facial features. Firstly, ledger Zoom in Canvas to our middle parts, to our circles. And firstly, we will go over our left part and we will create the first i by creating the shape of the ellipse or a perfectly round circle. Just go over our line that we have on the horizontal axis. And here we will create our shape. As always, we are doing it just with one line without an holding our Apple pencil. If we want to create the perfect shape, we are holding our Apple Pencil at the ends and we are holding one of our fingers on the screen. To snap to a perfectly round circle. If we want, we can adjust the size by moving our Apple pencil from side to side. So find what works for you. When you are done, we will go over the top to edit shape. E.g. we can play around with the position of these elements. Lead, just put it more towards the left when you have something like that, Let's just tap on our screen and we will go over our right parts and we will try to recreate the same shape here. So let's just go and do the same thing as before. Just go and variable B, creating this shape, holding it at the end, holding one of our fingers on this screen at adjusting the size to make sure that we are creating the same size as we have it on the left. We can go over the top to Edit Shape and we can move this little shade that we just created to our first i. If they are similar to one another, is good. If it's not, we will just go between these nodes and we will hold our Apple pencil there and we will move it until we find this size that we need. When the second eye has the same size as the previous one, we will just move it to where their rights and we will try to keep the same distance from the center. And we will try to put these second, I own the same line. When we are done, Let's just tap on the screen with one of her fingers or with our Apple pencil to get away from this editing mode. And now we will just go inside of these two shapes and we will shade them. When we did it, we will grab our eraser tool. We will adjust its size to something not too big, probably something like eight per cent or a seven for the Eraser tool, we are using a round brush, or if you want to use any other brush, you are welcome to do it. We will go over the bottom part of our eyes and we will cut little pieces from them. Firstly, let's just go over our left. We will go to the bottom part, to the left of the bottom part. And we will put a little dot with our Eraser tool when you have it on one side, Let's move on to the opposite side and we will try to do the same thing here. So going to the same place on the opposite eye and we are cutting this little piece. And when we have it's ledgers, get back to our brush and we are ready to continue agent our facial features. And we will continue by adding a little nodes. These nodes will have the shape of the heart, but this height will be flipped vertically. So let just go to this intersection that we have in the middle. And from this intersection we will create the shape of the heart. Ledgers go a little bit above it. And we will firstly create a shape like that. You can play around with its size. You can play around with how big you want your nose to be. And when you have these sheep or one set, we will go on the opposite side and we will try to repeat it here. Just connect these two lines together and when you have them, we will go inside and we will shade that. When we have something like that, ledgers go and add our mouth. So firstly, we will go underneath this nose shape and we will create the first-line like that. When you have it on one side, we will need to mirror it on the opposite side. Let's just go and create the line on the right side. When we have it here, we will go firstly over our left part and we will create another line. So these term, it will go up when we have it on the left side. Let's move on to the opposite side, and let's do the same thing here. So we are just mirroring what we have over our left parts. Now one more time, going over our left part and create an elisa line like that. When we have it on the left, we are going over our right part and doing the same thing here. When we have the top part of our mouth, we will need to create the bottom part. So firstly, let just go over these little line that we have right here. And we will need from the end of this line, create another line going like that. Now we can continue adding the lines by repeating what we have over the top part, where we can go over the opposite side and we can just repeat what we had right now on to our left part. Basically the shape will look like that. And when you have it on one side, Let's repeat it on the opposite side, we will work onto the ends of these lines and we will make them very pointy. When we have this shape, we will go inside and we will shade it. And now the last feature that we will add right here will be our little cheeks underneath the ice. So we will make this whole shape a little bit cuter. I just go over our left part. Firstly, we will go underneath the eye and we will create a little ellipse like that. You can play with the size. If you don't want to add the cheeks, You are welcome not to do that. If you want to try out a different shape, maybe you would want to create a circle here. You are welcome to do it as well. When you haven't done one side, Let's move on to the opposite side, and let's add the same feature here. Try to make them equal on both sides. And when you are done, we are done with our first sketch. So in the next part, we will be creating another sketch, and it will be a ghost popsicle. 3. Ghost Popsicle Sketch: Let's start making our second sketch from some tiny preparations. Firstly, we will go to our layers and we will rename our first layer with the first sketch. So I just tap on it. Let's choose Rename and let's type cats. Lollipop ends while we're still here into our layers, we will create another layer for our second sketch. So I just tap on the plus icon and straight away, we will rename this layer as ghost Popsicle. So one more time we are tapping on the layer, we are choosing Rename and we are typing down our knee. And when we have this new layer, when it is renamed, we are getting back to our Canvas. We will zoom it in on some blank space and we will start very easily by creating a shape of the perfect circle. The same way as before. We are just going variable that to our Canvas. We are creating our shape with one line. We are holding our Apple Pencil at the ends to snap it to a better shape. And we also tapping on our screen and holding one of our fingers there to snap to a perfectly round circle. We can adjust its size by moving our Apple pencil from side to side. And when you're satisfied with everything here, like jazz and hold, everything that we are holding right now. When we have these sheep, we will need to continue adjusting it and we need to create one more element here. And these elements will be Eric tingle. So what do we need to do? Firstly, we will go to the size of our sheep and we will mark down little elements like that on the side somewhere and approximate center. When we have them, we will go firstly, our left parts and we will start creating a rectangle the same way as we have created our circle. We are doing everything with just one line. So firstly, we are creating the line going down like that. Then we are going to work the right part. And we are ending up by going to this little intersection that we have, mark down when we have everything that we need, we are holding our Apple pencil. It will snap to a better shape and we will go over the top to edit shape to make it every single. So you can see that we have some options here, the rectangle or the square. It's up to you what you will choose. E.g. ledgers ends up with the rectangle right here. And what we need to do, we will need to adjust the whole shape and we will need to make this smooth connections, the smooth connections between our shape on the bottom and iris shape on the top. So we will zoom in our Canvas. Firstly, we will go over our left part. We will go to the middle note here, and we will know it until we reach this nice intersection with our first shape on the top. When you have it, we will do the same on the opposite sides. So I just go into our middle nodes and we are trying to put it nicely and have this intersection with the first shape or the top. If you want to adjust the shape even more, if you want to make it bigger or smaller, go to the line on the bottom, grab this little nodes in the center and adjust the size to your liking. When you are done, just tap on the screen. We will get away from this mode. And now we can go and adjust our lines so we can achieve this nice intersections manually. Let's just go and connect our shapes. When we did it, we will need to go to these two corners on the bottom and we will need to make them very soft. So instead of that very street corners, we will create the curves here. So firstly, let's just go over our left part and we will create a curve instead of that very straight corner. And when we have it, We will move on or our right side and we will do the same thing here. The main thing that we need to keep in mind that these two shapes should be similar to one another on each site. When we have something like that, let's just grab our eraser tool and we will erase everything that we don't need. So e.g. it will be these little corners that we have when we did it. We will need to continue by adding a little stick on the bottom. But before that, we will need to find an approximate center of the whole shape layer. Just go firstly over our ellipse on the top and we will create a straight line going for the approximate center like that. When we have the line, we will hold it at the end to snap it to a straight line and we will go over the top to edit shape if we need to move it and find the position that we need. So we will need to put it in the approximate center. When we did it, we will tap on the screen and we will create a horizontal lines. Firstly, going through the center of our shape on the top. So we have this little marks down through them. We will create our horizontal line the same way as always, we are holding it at the end. We are adjusting our angle. And if we need to adjust it even more, we are going over the top to aided shape. When you are done, we will need to create another horizontal line, but it will be on the bottom of our sheep, on the bottom. So we will need to step a little bit aside from this very soft corner. And from here we will create another horizontal line. So when you have it the same way, you will need to make it very straight. You will need to adjust the angle. If you need to move and go over the top to Edit Shape, you can play around with the position of this line. And basically this line will represent the ends of the sheet. Or the blanket that are ghost will have. So you can play around with the position of this line. When you have it, we will tap on the screen and now we can move on under our Popsicle and we are ready to add a little stick. So let just tap a little bit. Aside from this middle line, we will create a straight line on the left. Hold it at the ends to snap to a straight line. And we will move on to our right side and we will repeat it there. I tried to keep the same distance from the center. And when you have it, we will go on the bottom and we will connect these two lines with a curve. As always, hold it at the end if you need to adjust and go over the top to AD cheap and play with this little handles. And now we have the base and we are ready to move on and we are ready to add some details. So firstly, let's work on this little sheet. We will go to this line right here, and we will turn it into a wavy line. So let's just go and create something like that. We will stop a little bit as sites. We will go beyond the frames and we will create the line like that. So firstly, we will go to this intersection and we will create a diagonal line. As always, you can play around with how big you want the shape to be and you will need to connect it with the line on the bottom. And we will do the same thing on the opposite side. So firstly, let's go to this intersection. Let's create a diagonal line. Let's try to make it the same size of the line that we have on our right. And we will connect it with our line on the bottom. When we have this, we will go over the top part. We will step a little bit aside from our top elements and we will create another horizontal line. So this way we are going to be creating our ears and we will need to find where we need to finish them. So let's just create the line like that. Hold it at the end, make it very straight. If you need to adjust it, go over the top to Edit Shape, place it somewhere, and when you are done, we will go and do the following. Firstly, we will go again to this intersection. And from this intersection we will go up and we will create the curve like that. And we will loop it around and we will create a little here. When we have it on one side, we will do the same on the opposite side. So go into this intersection going up with a curve, trying to make it similar to one that we have over our left. And we are looping it around and we are creating the ear. If you need to adjust it in any way, if you need to make it similar to one another, just go and manually do that. Now when we have these two ears, we will go inside these two shapes and we will add the inner parts. So just go and inside we are stepping a little bit from the lines that we already have. And we are repeating the shape that we have on the top. When you have it on one side, Let's move on to the opposite swan and we will do the same thing here. Now when we have the ears, lead just adds a little shape or that soap that will represent some kind of a curl here. So we will go firstly on the intersection with our ear. And from this intersection, we will go and create a nice curve like that. You can play around with its size. You can play around how thick you want it to be. And when you are done, we are done with RMB. That means that we are ready to go and add our facial features. Let's firstly go to this intersection that we have in our center of these little shapes of the lips. And we will go a little bit aside from the center line and we will start by creating a shape of the eye. This time it will be elevated LFTs and we will put it right on this line that we have on the horizontal axis. So let's just go there and we will create the shape. You can play around with its size. You can play around with its placement. You can play around with how distance it is from the center. When you have the basic shape, ledgers go inside and shaded. And when we did it, we will need to move on over our right side and we will need to repeat it there. We will need to put this same shape on the opposite side, on the same line. We will need to keep the distance from the center and we will need to repeat the same shape. So let's just go and try to do that. When you hand the sheep led just shaded. And when you're done with the isolette, just move on and add our little mouth. So firstly, ledger zoom in our Canvas and we will go right on this line that we have on the horizontal axis. And firstly, we will go over our left parts and we will create the shape like that. This will be a curve that will be representing the bottom part on the ellipse or a circle. When we haven't done one side, we will move on, on the opposite side and we will add the same shape here. As always, you can play around with the curvature. You can play around with the size. It's all up to you when you have this shape, let us move on to our cheeks and we will add them right underneath our eyes. Adjust firstly, go over our left part and we will create an ellipse or a circle here, as always, play around with this size, play around with the distance from the center, play around with the distance from the eye. Find what works for you. And when you have the first shape, Let's move on over our opposite side and let's add the same shape here. Try to make them similar. And when you are done, we are done with our second sketch. In the next part, we will be creating a scarecrow. 4. Scarecrow Sketch: Let's start making our third illustration from some tiny preparations. So one more time we are getting back to our layers. And firstly, we will select our layer with cat lollipop. Let's tap on this to select and we will go to our arrow key on the top-left, we just are transformed, so we will use uniform method and we will just drag this shape more toward the right. So that way we will read some space for Arthur illustration. When you are done, Let's just tap on our heirarchy one more time and we will get back to our layers. We will select our layer with a ghost popsicle. We will tap on the plus icon and we will create one more layer. We'll rename this layer as scarecrow. So let's just tap on the layer and let's choose Rename. Now when we have a new layer, ledgers, get back to our canvas. Let's zoom it into this blank space. And we will start by creating a shape of the ellipse. The same way as always, we are just go in there very boldly and we are creating the shape with just one line. And the end of the line, we are holding our Apple pencil. When you have something like that leg and hold it. And let's go over the top to Edit Shape. And we will adjust the shape and we will make a chunkier ellipse. We will go to one of this side nodes and we will move it more to the side. So it is almost a circle, but still it is an ellipse. When it has something like that, we will tap on the screen to get away from this modes and we will adjust the shape even more. So we will go one more time to our arrow key, but this time, who will be using the method that is called work? Let's tap on it and you can see that we still have this bounding box that we can adjust. We have some nodes on this side, but also that we have some intersections. And we can adjust this intersection by dragging them and adjusting our shape just in that way. So what we need to do, we will need to go to our bottom nodes and we will move these nodes more to the sides. So firstly, let us go to our nodes on the right. We will grab it and we will drag it more to the right. So we are making this bottom part of our Arabs more around it. It will be wider than our shape on the top. So when we have moved our nodes on the right, Let's do the same on our left side. So we're just go in there and we are moving it more to the left, try to make it similar on both sides. And when you have something like that, let's just deselect everything by hitting our arrow key. And when we have this shape, we will need to adjust it and we will need to add the segments because now we are creating a pumpkin. Firstly, allege us find the approximate center of the whole shape and we know how to do that. We will need to firstly go and create a vertical line going through the center and then the horizontal one. Let's start from the vertical one. We will create it in the approximate center. We will hold our Apple Pencil at the ends. We will adjust the angle if we need to adjust it even more. If we need to move it where I go and open it up to Edit Shape and we are doing what we need to do. When you are done, we will tap on the screen and we will create a horizontal line. So the same way as before, just go in there and creates an delight holding it and the ends, adjusting the angle if you need to move it, go over the top to edit shape. When you are in done, ledgers go to our shape, to our main shape, and we will start creating the segments. So firstly, we will go in the central area and we will create the line like that. So just going somewhere right here. And from here we will create a curve going down. Again. It shouldn't be a little bit wider on the bottom rather than on the top. When you have this first line, we will need to repeat it on the opposite side. So just go in there and mirroring the line legis can make these two lines on the bottom by creating a curve. We can go a little bit beyond the frames. It's okay when we have it, we will need to work on set their areas on the side. Let's first go over our left side will go to the bottom part and we will need to work on to this segment. So let just go to this intersection. We will go a little bit higher and we will create a curve like that. When we have this curve, we will need to connect it with our main shape of this little segment. Let us go a little bit above our center line. And from this line we will go and create the curve that will connect us with this shape that we just created on the bottom. Play around with the size. If you want, you can hold your Apple pencil to create a better shape. Work onto this curve, just make it very smooth. And when you have it on one side, Let's move on to the opposite side and let's do the same thing here. Just go to this intersection and from it we will create a little curve. When you have it, we will go a little bit above our central line on our site and we will create another curve to make the connection. Hold the line. If you need to work onto this little connection, make it very smooth. And also let's work on so these connections right here. So we will need the whole shape be very smooth. If you need to adjust some lines, just go and do that. Now when we have this shape, ledgers, grab our eraser tool and we'll erase all the lines that we don't need. Now we have the base of the pumpkin, and that means that we can add more details. And firstly, let's work with the bottom parts. We will go there underneath our pumpkin and we will start by creating a little cooler or a rap ledgers. Gil, firstly, to these intersection that we have between our little segments, we will stop a little bit aside to the left or my left side, and we will create diagonal line like that. When you have it on one side, Let's move on to the opposite side and let's do the same thing here, just creating the line going down. When we have it, we will go to the bottom and we'll connect these two lines. The way we like, play around with the amounts of these segments on this rap, play around with the corners plate with everything that you want to play with. If you want, you can just not create this wavy line. You can go and create some petals like that. It's all up to you. So find what works for you and when you are done, let just go underneath this little color and we will add a stick here. So again, just step in a little bit from the center line and creating the line going down. When we have it, we are holding it at the end. We are making it a very straight line and we will need to repeat the same thing on the opposite side. So let's create another line going down. When we have two of them, we will go to the bottom and we will connect them with the curve. When we are done, we will go to our itself bite and we will add a little hat. So firstly, ledger zoom in this place and we will go more to the top. So probably allege us mark down one-half of this little part on the top and above it, we will create a curve like that. Hold the line at the ends, adjust the angle. When you have it. We will need to create another line like that, so it will be parallel to the previous one. Let's just go and do that. Age acid if you need to by going over the top to Edit Shape. And when you have it, we will need to go to this site and we will need to connect these two lines. Firstly, go over our left part and we will go to the bottom line and we will create a curve like that. So it will be connected in that way when we have it on one side, Let's move on to the opposite side and let's do the same thing here. Go into the bottom line and creating the curve like that. If we want, we can work a little bit onto these corners right here. But if we don't want, we will go to them and we will create the back part of our hats. So we will go to this intersection of two lines and we will vary smoothly, create another curve going backwards, play around with the curvature, make it believable that it is the back part of our hat. When you have this curve on one side, Let's move on to the other side, and let's do the same thing here. So go into this intersection and creating the curve, trying to make it similar to the one that we have on the opposite sides. And when we have this religious continue and we will add the top part of the hats. Firstly, we will go over our left part and we will go to this intersection that we have between our ribs and the main shape on the hat, which is on the top. And from this intersection we will create a diagonal line going up. So let's just go and try to create this line. You can play around with the angle. You can hold the line at the end to snap to a straight line. You can play around with how long it is. It's all up to you when you have this line ledgers and hold it. And let's move on to the opposite side. And we'll create another diagonal line the same way as before. We are going to the intersection on the top. And from this intersection we are creating a diagonal line. This time it will be a little bit smaller. Again, you can play around with its size. You can play around with the angle. It's all up to you. When you have these two diagonal lines, we will need to continue creating the top part, and now we will be creating this little peculiar hook. So now I go into our left part. We are going to the top on the line and we will create another diagonal line going down. Let's just go and do that. Play around with this size, play around with the distance from the center and from this line layer as with everything that you want to play around with. And when you have this line, we will need to continue creating this hook. So we are going to the ends of these diagonal line that we have just created, and we are creating the line going vertically down. You can make it very straight. You can just play around with the angle. Again, it's up to you. When you have something like that, we are going down with another diagonal line. When you have it, it is just a little line. We will go up and we will make this new line parallel to the line that we have a little bit on our left. So something like that. When we have it, we will need to loop this whole ship around and we will need to add some volume here. So let's just firstly go to the ends of the last line that we have created and we will add a little line like that. So we are creating a little triangular shape here. You can play around with its size. Then when we have it, we are going up and we are just making the parallel line that we have overwrite parts. When you have it, We are moving toward our left part, and again, we are repeating the line that we have over the top part. You can make it parallel. If you don't want to make it parallel, you can make it a little bit more in a different angle. And when you have something like that, we will need to connect this hook with our base of the hat. We will go to this line that we have just created and we will connect it with our little diagonal line over r right part. So just go and create a little line like that. And now when we have the base, we can work on so the whole base in general. So e.g. we can go along all of these lines and we can turn them into curves instead of the very straight lines. So we can play around with these just for a few seconds, if you like how it looks right now, you can leave it as it is. But if you want to adjust it in any way, ledgers go and very quickly do that. When we have the shape that we like, we will add one more detail to our hats. We will go to this little intersection right here. And from it we will create another curve going through the whole shape of the top part of our hats. So let just go and repeat the same line that we have for our array, but we will put it a little bit up ends when we have it, we will go grab our eraser tool and we will erase all the lines that we don't meet. When we have erased everything that we don't need, we will go and add more details here. So we are going into the top part of our hat where we have our little line here. And we will create another line. So let just go a little bit down and create another line. If you just hold in your Apple pencil at the end of the line and you were creating a curve, but it turned out to be a straight line. Don't worry, let just go over the top to Edit Shape and you can see that we have an option here. So we will just need to select arc here and we can play around with all these nodes that we have. And when you are done with this task, let just tap on the screen and let's add one more details. So we will create some kinds of the belt here, and we will need to create this belt buckle here. So we will just go to the middle part and we will create a rectangle here. Let's just tap a little bit aside from the central line and we will create another line going down. When we haven't done one side, Let's repeated on the opposite side. If you want, we can do inside of this shape and we can create a little thickness here. So we will go and repeat the whole shape of this rectangle. Just tap in a little bit aside from the lines that we already have. And when we have it, we are ready to move on and we are ready to add our facial features. Firstly, let us move on to our middle part and we will start by creating our eyes. So firstly, let's just get on our left part and we will create a big iron right here. The same way as always, we are just going to the left part and we are creating the circle. Hold it at the end, hold one of your fingers on the screen. I just decides to your liking. If you need to adjust it even more, or if you need to move this shape a little bit more to the left or to the right, go over the top to Edit Shape and adjust it from here. When you've positioned your elements correctly, ledger step on the screen and let's create another eye on the opposite sides. The same way as before. We are just going to the opposite side and we are creating this circle. We are holding our align at the ends. We are holding one of our fingers on the screen. We are adjusting the size. If we need to adjust it even more, or if we need to make sure that our second I is the same size as our previous one. We will just go over the top to edit shape. We will just move this shape toward our previous shape. We will adjust its size. When we have the right size. Let's just move this shape toward our right part. Let's try to keep the same distance from the center. Let's try to put it on the same line. And when we are done, Let's just tap on the screen and we will go inside of these shapes and we will shade that. When we did it, we will grab our eraser tool. We will adjust its size and we will go to one of the sides of these elements of our eyes and we will cut little pieces. So e.g. let's just go over our rights bottom part, and we will just put the first dot over our left elements when we have it to the one side, Let's repeat it on the opposite side. Go into the same line and to the same place and just cutting this little piece when we have it, we are getting back to our brush and we will move on to the nose elements. So firstly, let's just zoom in our canvas and let's go to this intersection that we have in the middle. And from this intersection we will go and create the first shape like that. So again, we are creating their reversed cards when you have it on one side, Let's move on to the opposite one and laser the same thing here. Play around with this size, play around with the position. It's all up to you when you have this shape, Let's just go inside and let's shade it. When we have the nose, let's move on and add our little mouth. So we will go under our nose and we will create the curve like that. Hold the line and the Yan's play around with its size. And when you have this little line ledgers go underneath it and we will create another line like that. So we are making the parallel light same way as before. Hold it at the end. If you need to adjust it, go over the top to aided sheep. When you are done, we will need to connect these two lines at the sides with the curves. Firstly, we are going over our left part and we are creating the curve like that. When we have it on the lateral, Let's move on or are right part. And let's do the same thing here. When we have connected our mouth. Let's just go inside of the sheep and we will shade it. And to make it a little bit more interests in alleges go along the whole shape of our mouth and we will create the vertical lines like that. So we are creating some stitches, play around with the amount of this teachers play around with the distance between them. When you are done, we will go underneath our eyes and we will create a little cheeks. So the same way as always, we are just go into the left part and we are creating a little shape for the cheek. You can play around with the shape. You can play around with how big it is with replacement with everything. If you want to explore a different shape for your cheek, you are welcome to do it when you have it on one side. Let's move on to the right and tragedy, the same thing here. So we will need to repeat this shape, we will need to repeat this size and we will need to repeat the placement. If you need to adjust the shape, you know what you need to do, you will need to go or that's up to Edit Shape. And when you are done with aging the last cheek, we are ready to move on and we are ready to go to our next chapter where we are going to be creating a bad cookie. 5. Bat Cookie Preparations: Before starting to make our last sketch, let's just find the placement for it onto our canvas because now it is very crowded and we will need to arrange our elements very nicely onto the canvas. And as we have all of our elements on their own separate layers, it will be very easy for us to do so. Firstly, let just select one of the layers. So e.g. it will be scarecrow. We will go to our arrow key on the top-left, will tap on it, will use uniform mass. And you can see that we have the bounding box. We can scale our elements down. So we will need to go to one of the corners. So e.g. let's just go to the corner on the top right. We will hold our Apple pencil there and we will move our Apple Pencil diagonally down until we find the size that we like when we have it, we can rotate our object by going to this green node or the soap. We will need to hold our Apple pencil there and we will need to move it in a circular direction. Let's find what works for us. Let's just find the placement. If you need to move it more to the left or to the right or if you want to position it somewhere on the top, it's up to you, find the placement that works for you. And when you are done, ledger, deselect everything by hitting our arrow key one more time. When we did it, we are ready to go again to our layers. We are ready to select the different layers. So e.g. let's select ghost popsicle. We will get back to our arrow key on the top-left and we will do the same thing here. We will find the different placement. We will scale it down or if you want, you can scale it up. It's up to you. We will find the position that will work for us when you are done, Let's deselect everything by hitting our arrow key. And let's do the same thing one more time. Going back to our earliest selecting our cat lollipop, Let's get back to our heirarchy on the top-left and lives do the same thing here. We are scaling Irish shaped down. We are rotating it. We are finding a different placements. When you are done, Let's deselect everything by heating our arrow key. Let's get back to our layers and let's create one more layer above our layer with the Scarecrow. We are tapping on the plus icon and we will rename this layer as bad cookie. So I just tap on the layer and let's choose rename. Our cookie will be made from three parts, but we will start very easily by creating the shape of our bat. Firstly, let's just make sure that we are on the right layer, which is our bad cookie. Let us get back to our canvas. Let's zoom it into this blank space. And we will start very easily by creating a shape of the triangle. The same way as always, we are just go into our canvas and width one line we are creating the needed cheap. At the end of the line we are holding our Apple pencil to snap it to a perfect shape. And if we need to adjust it, we're arguing over the top to edit shape. Here we have some options. We will need to select training, and we will need to adjust the shape even more to firstly, let us keep this line that we have over the top, which is horizontal, strictly horizontal. So we will just go and adjust our notes and we will try to keep it very strictly horizontal. We will keep this whole shape very wide and we will shrink it down a little bit from the bottom. So let's just go to this node over the bottom and we will move it a little bit up. Also, we will need to pay attention to this size because they should be similar to one another. So if you need to adjust their size, ledgers go to the notes and let's play with that. When you have the sheep like that's led, just tap on our screen and let just go and continue agent or details. We will need to find an approximate center of the ship, and we will need to put it on the vertical axis. So let just go above our shape and let's create this line that is going from top to the bottom for the whole of our shape. Let's hold this line and let's adjust the angle. And if we need to move it more towards the center, ledgers go over the top to edit shape. Let's move it to the approximate center. When you are done with this task, Let's just tap on the screen and lead, just turn these triangle into a bat. We will be using the tool that Procreate has, which is called symmetry, because our bat is symmetrical on both sides. Ledgers do the following. Firstly, we will go to our wrench icon or our top-left. We will tap on it and we will go inside Canvas here. Firstly, we will need to toggle drawing guides. When needed it you will see that you have some cells that are going through the whole shape of your canvas. This is what we need, but also it's not what we need. We will need to use a different option. We will go towards our edit drawing guide. We will tap on it and you can see that we have a little tab on the bottom. So we will need to go into symmetry folder. When you did it, you will see that you have the line that is going from top to the bottom. This line has two notes. We will need to go to this blue nodes in the center, and we will move these nodes toward the center of our shape. We're just going to this line that we have created. And when we have this line onto this, please let just have done over the top right. Now we need to make sure that our layer on which we are creating the sketch is now assisted. So we will go back to our layers and you can see that these bad cookie Leah now has a little title assistant. That's exactly what we need. That means that if we draw something on one side, it will be automatically mirrored on the opposite side. And that's exactly what we need. Now when we have every headset, let just start making our bet. So now let's just go down and we will start from here. We will stop a little bit from this corner on the bottom. We'll mark it down and we will go to one of the sides, which is natural for our hand flow. And we will start by creating a loop like that. When we have it, we will just need to go along the sides of our triangle and we will need to create wavy lines. You can play around, you can find what works for you. Basically, we will need to end up with something like that. You can play around with this whole shape. You can make these lines more courier if you want, you can just play around with the whole shape. If you don't want to create a very sloppy lines, you can just create different lines. It's all up to you. You can make this dense closer to the lines that you have for the triangle. You can make them further apart from this line. It's again up to you. When we have this basic shape, we will need to go to the soap. And firstly, we will step a little bit aside from this central line and we will mark it down when we have it. We will just need to create a curve going on the top. And we will connect it with this line that we have on the bottom. When you have the basic shape, you can play around with the elements. You can just try some things, just find what works for you. And when you have the shape that you like, we will need to finish it up by going to this little marks down and we will create half on the circle here. Again, you can play around with how big it will be, just make it smooth. And if you want to adjust some parts, just go for it. And when you have this shape, Let's just go and add the ears. So we will go to the intersection between the wing and r hat and we will create little triangle here. Again, you can play around with the size, with everything with a curvature. If you want to make these corners very smooth, just go for it. If you want to leave them very pointed. Again, it's up to you when we have this ears, let just go inside and add the inner parts. So we're just going inside and we are repeating the main shape. When we are done, we will go and add our facial features firstly, go into our left part. Firstly, we will go to this line that we have on the horizontal axis, and we will create a little eye here, which will have the shape of the ellipse, play around with its size, play around with the placement. If it's not happening from her first try, just try out one more time. When you have the eyes, we will need to create a little mouth. So we will go right between the eyes. If you want, you can just grab an eraser tool and erase all these lines that you don't need. We will just go between the eyes and we will start by creating a shape like that. When we had the shape, we will need to add little Thanks. So ledgers go under our little mouth and we will create a little triangle. Now, let's just go underneath the ice and we will add our little cheeks. So again, you can play around with their size and with the distance from the center and from our eye. If you want to adjust some places, just grab an eraser tool and erase everything that you don't meet. The last elements that we will add for our bat will be lethal membranes. So firstly, we will go to our left part or to a right part. It doesn't matter actually. We will just go and create the lines like that. We can play around with them. We can look them around e.g. and create the shapes like that. We will go over these little parts that we have, this little dance and we will add a few more lines like that. So when we have two of them on each side, we will go to this little legs and we will create just the curve like that. And now we are done with our sketch of the bat. So later on we will be turning it into a full cookie. 6. Bat Cookie Sketch: Before turning our back into a cookie, we will need to do some preparations. Firstly, we will need to turn off drawing, assist and tweaking do it by going back to our wrench icon or the top-left, we will go under Canvas and we will toggle Drawing Guide from here. But to be honest, it's not enough if we just go back to earlier to our Canvas and if we create one line, you will see that you are mirroring this line on the opposite side. And we need to just get rid of this. Ledgers, go and do one more thing we will do to our layers. And as you can see are bad cookie layer is still assisted. So that means that we will need to turn it off manually. Let just tap on this layer and let's select Drawing Assist from the list. Now, if we just do the same thing as before, if we create some line, you will see that we are creating just a singular way and it is not mirroring on the opposite side. That's exactly what we need. So now when this preparation is done, we will do the following. We will get back to our layers and just in case our illustration wants to turn out, okay, from the first try, we will just make a duplicate of this layer. And that means that we can start all over again if we need to. So what we need to do, we will go to this layer with our bad cookie. We will select it and we will swipe it from right to left. We will choose duplicate. And now we have two layers with the same content. And we can go to the top one and we can hide it just in case we need it later on. So we will go to this little checkbox near that, an icon and we will tap on it so we know that we are safe. And if we need this layer later on, we can start all over again. Now, let us get back to our firstly with bad cookie and we will do the following. We will add a little bit of perspective to it. So when the layer is selected, we go into our transform tool and we will use distorts with the district method. We are aging every season angle to mimic a three-dimensional surface. So we are adding some kind of a perspective. This illustration, this little sketch of the bath, is our adsorb cookie. So we will need to make sure that it is on some kind of a surface. So that way we can add a little thickness to it and we can create the bottom part of the cookie. What we need to do firstly, we will go to OneNote that we have over the top or the bottom, which is in the middle. And we will drag it a little bit towards the right side, if you are on the top or the left side, if you are on the bottom. So we will need to do something like that. You can see when you are moving your nodes, you are adjusting the whole shape of your sketch. That's exactly what we need. And we can play around with the notes. We can just make some resilient angles. Basically, we will need to do the following. We will need our right part of the bounding box be a little bit wider than our bounding box on the left. So we will need to go to the left, e.g. and just make this whole shape a little bit smaller so we can play with the angles. We will need our sheep over there, right Part B, a little bit bigger than our shape over the left part. So when you have something like that, we can just go to our arrow key on the top-left and tap on it one more time to deselect everything. If it's not working for you, you can just try out one more time. And when you have something like that, you can follow along. So when we have something like that, we will need to add a thickness to this shape to make sure that it is somehow a 3D object, we will need to go over are convex and concave part and we will need to create vertical lines going down. And that way we can easily go and repeat the shape that we have on the bottom. We can do it manually, but also we can use a tool that our procreate has. So we will need to get back to our wrench icon or the top-left, and we will need to turn on Drawing Guide. But this time we will be using not as symmetry, but a 2D grid. We will need to go over our edit drawing guide. We will need to turn on 2D grid. You can see we have some cells and also for our convenience, we can go over the bottom part and we can toggle assisted drawing. When we're at turning on the assisted drawing, we will be glued to these lines that we have for our grid. So let's just try it out. We will go and hit done over the top right. And now we will zoom in our Canvas and we will do to the middle part of our convex and concave part. And we will just create the lines going down. You can see how easily we can do that. When you have the line like that, it will be our thickness. So we will need one more time to go over all of these little parts over the convex and concave parts and add these little lines going down. Try to make them similar to one another. Try to keep the same length and ledgers go all or these parts and let's add these slides. Let's make sure that all of them have the same length. If you are sure with it, ledgers go and turn off our drawing guide because we don't need it anymore. So again, we go into our wrench icon, we are Togo and Drawing Guide from here, let us check out whether it is assisted into our layers. If it is, we are just tapping on the layer and we are choosing Drawing Assist from here. Now we can easily go and repeat these shapes that we have of our bottom part of the bats. Ledgers guilt and repeated just going along this close allies that we just created, there will be our end point. Let's just go entropy this shape. And that easily we have added some thickness and we made it a 3D object. So now if you want, we can just grab our eraser tool and we can erase all the lines that we don't need. So let's just go and erase everything that is not necessary here. When we have cleaned it up, we will need to make a copy on this layer and we will need to put the second cookie on the bottom. So just imagine a sandwich cookie. We have one on the top, one on the bottom, and we have some feeling in between them. You can play around with how much feeling you want. So now let us get back to our layers. Let's select our layer with this cookie and we will make a duplicate swipe in the layer from right-to-left, choosing duplicates. When we have this second layer with the same contents, we, I just go into our arrow key on the top-left, we are using uniform method and we will just drag this new shade down a little bit to the right. You can play around with the thickness. It's all up to you when you have positioned it nicely. Let's just deselect everything by hitting our heirarchy one more time. And now we will need to get rid of all the elements that we don't need. We will zoom in our Canvas. We will grab our eraser tool and we will erase all the overlapping parts. Just go to the top cookie and let's erase this top part of the bottom cookie. And also we can go inside the shape and we can erase these lines because we don't need them anymore. And when they have something like that, we are ready to add the feeling. So the first thing that we will need to do is to go to this cookie on the bottom. And we will need to repeat this line along the whole shape of the cookie. So let just tap a little bit aside and let's repeat this shape. And when you have it, we will need to connect it with our cookie on the top. And again, we can use our drawing essays to create these lines that will be very vertical. Let just go to our Arrange tool one more time and let's toggle drawing guide here. One more time. We are going over A1 drawing guides and we will turn on assisted drawing. We are hitting done and we are going to our shape that we have right here and we are creating the vertical length. Firstly, let's start from the sites where just go there. And let's create these two lines. When we have these two vertical lines on this side, let's just grab our eraser tool and we will erase these lines that will have on the back. Remember that we are using our assisted drawing and now you can use only the vertical or the horizontal lines. So now let's erase them. And when we did it, we will get back to our brush and we will need to go inside the feeling sheep. And we will need to add these lines that are vertical. We can go and add them on the same places that we have them on our top cookie. So something like that. But as we have the shape of the feeling a little bit smaller than the shape of our main cookie. We can shift this line a little bit toward the left, so we can do something like that. Just a little shifting them to the left and ledgers go all over the place and let's add these vertical lines. And when you have added this line, sledges go and turn off drawing assist. So one more time we go into our wrench icon, we add so Glenn drawing guide here. And we need to make sure that we have our layer node assisted into our layers. Let us go to the layers. Let's just go to this layer which is now assisted. We'll tap on it and we will choose Drawing Assist from here. We will also needs to go inside of the shape of the feeling and we will need to create another line here. So later on, we will color these two parts differently. So let us go to the middle part and we will repeat the line that we have on the bottom. The very last thing that we will need to do with this gauge is go into our layers. And we will just combine these two layers together. So we will go with the bottom parts, which are layer on the top. We will tap on it and we will choose merge down. And now everything that we have for our bad is on one layer. Now, the last thing that we will do with the whole sketch, we will just go to our elements one by one and we will position them nicely onto our canvas. Ledgers go and start from our bad cook it the same way as before. We are going back to our arrow key. We are using uniform methods. We can rotate it, we can make it smaller, we can make it bigger. We will need just to find the placement for these cookie. If you want to play around with other objects, find a different placement for them. Ledgers go and do that. And also, if you want, you can feel the areas that are blank right now with some additional elements. So e.g. let us go back to our layers. Let's just create one more layer. On this layer, we will go to the blank spaces and we will add this candy corns. So what we need to do, we will need to create a shape like that. It is a very rounded triangle. If it's hard to create it from scratch, you can start by creating a little olives, then create a little dot, and then connect this shape with a shape like that. Add a few of them if you want to. And when you have all the elements that you need, we will just go inside of these elements and we will create a few lines like that. So if you want, just go over the blank spaces and let's add this little candy corn all over the places. And we will meet up in the next part when we are going to be aiding the colors. 7. Cat Lollipop: Base Colors: Left that are coloring fired from some tiny preparations. Firstly, if we are satisfied with the position of all of our elements onto our canvas. And if we don't want to change their position or angles or anything here, we can just go to our layers and we can combine all of these separate layers with our sketches into a one, and it will be easier for us to work with one layer later on. So what we need to do, we will need to go to the layers and we will need to do it in just one movement. So we are positioning one of our fingers on the bottom layer and one of our fingers on the top layer, and we are making a pinch movements. And now everything that we have for our sketches are on one layer. We can just go and rename this layer as sketch. I just tap on it and let's choose Rename. And when we have this one layer with our sketch, we also will need to go and change the opacity level of this layer. The opacity level is how transparent your layer is. And by default earlier comes with 100% of capacity. We will need to create one more layer for our coloring part. And we will need to see what's happening onto our layer with this gauge and also on our new layer. And we will need to just go to this layer with the sketch and we will need to change the opacity level. So let's just go to this icon. We will tap on it. We will go to the opacity slider over the top part. And you can see that we have some handle here. If we just grab it and if we move it sorted the left part, we still will be able to see what's happening onto this layer, but it is not that bright and it is not that disturb it. And it will be helpful for us later on when we did something like that. When we change the opacity level to 50 something percent, we will tap on this layer one more time, and also we will tap on the plus icon to create a new layer. So let's just do it. And we will need to position this layer underneath our layer with the sketch layer. Just hold this layer and let's drag it down. When you did it, ledgers go and start adding the colors to one of our elements. And let's start with our cat lollipop. We will be starting from the bottom and we will be creating a new live for each element that we have for our Lollipop. So e.g. one layer for this thick, one layer for this wrap, one layer for the main shape of our lollipop. So what we need to do firstly, we will need to prepare our brush. So let's just go back to our brush library. We will go to the calligraphy folder and we will choose mono line brush. If you want, you can go and change the size of it when you did it. Let's just go to our color palettes and we will start by selecting the scholar with dark brown name. We will tap on it and we will get back to earliest. We will make sure that we're on the right layer, which is our new layer. If you want, you can just tap on it, you can rename it and e.g. name it, stick onto this layer. We will go, we will zoom in our Canvas, do these needed place. We will go to the stick and we will just very easily go and create the shape. We can do just by creating the outlines and then dragging and dropping the color. Or we can just increase the size of our brush and just with one line, create this shape. Just adjust the size and create the line, hold it at the end. We're doing everything the same way as we did before. When you have something like that, when you have adjusted it, when you've played with the angle, if you need, you can go up to Edit Shape. Again. It's all up to you. When you found the shape that is working for you, we will just tap on the screen. We will go back to our layers and we will create one more layer for our next shape. Let's just tap on the plus icon and let's rename this shape as rap. And also to make sure that we are doing everything correctly. Ledgers go and select these two layers, wrap and seek, and we will put them in a separate group. So to select the second layer, we will need to go to it and we will need to swipe it from left to right. You will see that now two layers are selected. And when they are selected, when I go into the top-right and we are heating group also, we're going to rename these groups. So we are going to it, we are selecting it where it's happening it. And again, we are choosing Rename and ledgers go and name it cat lollipop. Now, let us get back to earlier with a wrap ledger. Zoom in our Canvas. Let's get back to our color palettes and we will select this color, will be the name White. With this color, we will go and create the shade that we have for the rap. Again, you can just go and select the size of your brush. You can start by creating an outline and then adding the color inside. Let's just go entropy the sheep, you don't need to repeat everything with 100% of similarity. If you want to adjust some places, you are welcome to do it. If you prefer to create an outline, we will need to close the shape to be able to drag and drop the color inside. So let just go and close it. When we have some feel like that's ledgers go to our top-right corner and we will drag and drop the color to the needed, please. Now when we have these pledges, get back to our layers and let's create one more layer above earlier with the rap, let just tap on the plus icon. Let's tap on the layer and let's choose Rename. Let's rename it as body. And now when we have a new layer, let us get back to our color palettes and we will select this color with the name pale orange. With this color, we will go over the top part and we will create the shape of the circle the same way as before, just creating an outline with one line, whole July and at the end, adjust the size, adjust the placement. If you need hold one of your fingers on the screen to snap it to a perfect shape of the perfect circle. If you need to adjust it even more, go over the top to edit shape. When you are satisfied with the shape, Let's just tap on the screen and let's just drag and drop the color inside. So again, we're arguing to our top-right corner and just dragging and dropping the color. Now let us go over the top and we will add the color to the ears. Again. We are just creating the outlines. When you have the outlines layer, just drag and drop the color to display sets. And when we have it, ledgers go and add this little rim that we have in the middle part of our fees. So let us go to our color palettes and we will select the color with the name dark orange. You can change the size of your brush. You can make these elements very thick or very thin. It's up to you. Basically what we need to do is to go inside of our shape and repeat this line that we have here. The same way as always, we are just going there and with one line we are creating the shape and the end of it. We are holding it and we are holding one of our fingers on the screen to snap it to a perfect shape. If we need to adjust it, we are going over the top to edit shape. Let's position it correctly. And when we are done with this task with the same color, we will go to the inner parts of our ears and we will add the color here. So let's just decrease the size of our brush and ledgers go inside the ears and let's add the shapes. When we have the outlines of this little shapes, we can just go and manually recolor them, or we can try out to just go and drag and drop the color here. But probably we will face a little trouble here. If we just drag and drop the color. We will see that we are aiding the color to the whole sheet. But also you can notice that if we don't and hold our Apple Pencil and it's up, we have color dropped threshold and this blue line, without an holding our Apple pencil, we will need to move it to the left until only the area that we want to be recolored is recolored when you have it, let us go and do the same on the opposite side. So we will just go to our top-right corner and we will drag and drop the color to the needed please. But also we can have another problem here if we just get back to earlier and if we hide our layer with the sketch, we can zoom in our Canvas and we can see that we have a little line between our main shape and our outline. We will need to grab our brush and we will need to go menu and tricolor this little line. Let's just do it on both sets. And also while we're still here, when we don't see our sketch, we can just grab this color that we have for the main shape. And we can adjust our line for the bottom part of the inner parts of the ears. We can just go back to our color palette and select the same color. But also if we already have the color onto our canvas, we can use the Eyedropper tool to select these color. We will need to hold one of our fingers on the screen. And when you hold it, you will see that you have this little too invoked. You can move this to the color that you need and you will see that the top part is changing. And when you have selected the color that you need, you will just hold your finger and you will see that the color changed on the top right. And when you have changed the color ledgers go and create a line that will adjust the bottom part of the inner parts of the ears. So just go in there and creating the curve going through the whole shape. Hold it at the end, adjusted if you need to. When you are done, ledgers go and manually adjust the shape that we don't need here when we have everything that we need, ledgers, get back to our layers and let's unhide our layer with the sketch. Now we added the basic colors for all the elements. And in the next part, we will add a little shadow and also one more detail. 8. Cat Lollipop: Adding a Wrapper & Shadows: Let's start by creating a plastic wrap going along the whole shape of art. So part of our head or the body as we are calling it. Firstly, we will need to go back to our color palettes and we will need to select the color with the name whites. When we did it, we will need to get back to our layers and we will need to go to early with a wrap here and tap on the plus icon to create a new layer, we will rename it as body wrap. So let's just tap on this layer and let's choose Rename. Now, we will need to get back to earlier with the body. We will tap on it and we will choose Select. You can see that now we have selected only this object. And now when it is selected, we are getting back to earlier with body wrap. We are tapping on it, choosing Fill Layer. And now here you can see that we have this same layer, but it is colored differently, just with a solid white color, and that's exactly what we need. Now for convenience, alleges go to our layer with this cage and we will hide it. And also we will hide our layer with the background. When we did it, we will get back to earlier with body wrap and we will do the following. We will go to the top-left and we will tap onto the magic wand to here we will select Gaussian blur. Now you can see that we have the Gaussian blur on the top and it says slide to adjust. So we will just go to our Canvas with our Apple Pencil and we will just hold it there and we will move it to the right. We will leave it at something like ten per cent. You can see that we are blurring the outlines and that's exactly what we need. We will use it to create this rap going around the whole shape when we did it, when we set our Gaussian blur to 10%, we will need to go to our S ribbon icon, which is our Select tool. And we will need to use automatic selection. Just tap on this automatic on the bottom. And we will go to this board outline. We will tap on it with our Apple Pencil and we will just move it a little bit to adjust the threshold. Let's leave it at something like 25%. You can see that this area, which is black and blue later on, will be recolored with the color. When we have selected these ledgers go against our bottom panel and we will choose Color Fill here. And you can see that we have added the outline, which is repeating the shape of our head here. That's exactly what we need. Now let's just deselect everything by hitting R S ribbon icon. And we will zoom in our Canvas and menu. We will go and recolor the places that we need to recolor. So e.g. we will go here near the ears and we will just go with our brush and we will recover these parts. Let's just make sure that we have recolored everything. And now we can just get back to early as we can get back earlier with the background color. So let just tap onto this little checkbox and ledgers go and unhide our layer with the sketch. Now, we will just need to go to earlier with body wrap and we will need to adjust the opacity. Let's just tap on this icon and let's set it at something like 40 per cent. Now, if we just go back to early with a sketch and just for 1 s, we will hide it. You will see that we have a nice transparent wrap here. And when we had the rap, we are ready to add a little shadow. Firstly, let's start by creating a shadow on the main shape of our lollipop. We will need to go and select the same color that we have for the base. So if you want, you can go back to your color palettes and selected from here. Or if you want, you can just go and invoke the eyedropper tool by holding it on. They needed color. When you have the color that she needs, we will need to go and create one more layer above earlier with the body lie, just tap on the plus icon and let's rename this layer as shadow. We will need to go and change the blending mode of this layer. Blending modes are different ways your layers can interact with each other so you can add different visual effects. For the shadow, we will use multiply blending modes and multiple blending mode multiplies the color of the blending layer and the base layer and resulting color is always darker. So what we need to do, we will need to go to this icon and we will just select Multiply blend mode here, S for the opacity. For now, legislated 35% ledgers grab our little handle and move it to where the left parts. And also one more thing that we will need to deal with this layer is to clip. This leads to a previous one. That means that we won't be creating any new elements going beyond the frames. So that means that we will be aiding that needed elements only onto the areas that we already have on the previous layer. Let me show you what that means. We will just go to our Canvas. We will increase or decrease the size of our brush. We will go to one of the sides and we will start creating the curve here going alone the whole shape of one site. Let's just go and create this little curve. You can see that we are going beyond the frame that we have for our shape. If we just go back to our layers and if we tap on this layer and if we choose Clipping Mask, you will see what happens. We will be recoloring the areas only that we have on the previously. And that's exactly what we need. That's why we need this clipping mask. So now let's just go to this layer with our Shadow Legends go and manually recolor this area that we have underneath our little curve to make sure that you have recolored everything that you need leg, just get back to the layers and we will hide our layer with the sketch layer. Just make sure that everything is looking fine if you want to add more shadows. So e.g. we can go and add a little shadow to our little ear. We can go and do that. Ledgers decrease the size of our brush. And let's just go to one of the sides, the same side that we had our shadow on the main shape. And we will add a little curve here. Firstly, you can adjust the curve the same way as always. You can hold it at the ends. You can go to the top to Edit Shape, play around with it. And when you are done, we will go and manually create another curve going down and we will recolor the rest of the area, ledgers smooth and this little corner that we have between these two shades and ledgers, grab our eraser tool and we will erase everything that we don't need. So e.g. if you have this very soft corner right here, Let's just grab and make it very straight. So play around with the shadows, play around with how big you want your shadows to be. It's all up to you play around with the curves. Just make sure that you are adding the shadow only on one site. When you are done with this shape, ledgers go back to our layers and we will create a little shadow on our rep. I go into early with a rap, just the wrap not the body rep will tap on it and we will create one more layer above. So again, alleges, rename it shadow. We need to clip this layer to a previous one so we add tapping on it and we are choosing clipping mask. We are going to this icon and we are selecting multiply blending modes. When we did it, we will get back to our color palettes and we will select the color with the name light gray. Now let's just zoom in our Canvas to this area that we need to add the shadows too, and ledgers get back to earliest and we will unhide earlier with the sketch. That way we will know where we need to put our shadows. Now, let's just zoom in it one more time, and let's just go to this little parts and we will add our shadows. So just adding the lines like that. Now let us check out what we ended up with. So we are going back to our layers and we will hide our layer with the sketch if we need to adjust some places, Let's just go and do that. Now to avoid this double effect of the rap alleges go back to our layers. We will select early with body wrap and we will drag it under our LEA with the main ramp. When we have it, we have a nice wrap for this little bottom parts. And when we did it, we are ready to move on to our Stieg. We are ready to create one more layer, so I just tap on the plus icon one more time. We will clip it firstly, and we will rename it as shadow. Let's go to our N. I can let select them multiply blending modes for now legislative the opacity at 50 something percent, we will get back to our color palettes and we will select the color with the name dark brown. We will go to the same site that we have our main shadows on. And we will go to this site and we will add our shadow to this tick. So just create the line like that. And if you want, you can go underneath this little rap and we can just repeat this shape here and add a little shadow to our stick. And now, when we have all of our shadows down, allege us. Move on to the next part where we are going to be aided our facial features. 9. Cat Lollipop: Facial Features: Start with our facial features. Let us get back to our layers. And firstly, we will unhide our layer with the sketch. So that way we will know where we need to put our new elements. Now when we did it, we will go to our shadow layer of our body. We will select it and above it, we will create a new layer. So I just tap on the plus icon and let's rename this layer as facial features. Let's make sure that we are using dark brown color for this elements. And Linda zoom in our Canvas to these elements and we will repeat that ledgers firstly, start by creating these big circles for the eyes. Let's just go and increase the size of our brush. And let's just put these two dots. When you did it lead, just grab our eraser to let adjust its size and let's just cut this little pieces that we can add onto our sketch. And when we did it, let us get back to our brush. Let's decrease its size and let's continue by creating the outline for this leads cell knows that we have. Let's just go and create this outline. When you are done with the outline ledgers go to our top-right corner and let's drag and drop the color insight. When we did it, we will go and continue adding details with this color. So let's just go and decrease the size of our brush even more and we will start to create this outline of the mouth. So just go with the straight lines and create this outline. Make sure that the whole shape is closed. And when you do it, let just go and drag and drop the color insights. Now, let us go and select the different color for the cheeks. We will get back to our color palettes and we will select the same color that we use for the background. Now let's go and increase the size of our brush. And let's add this little cheeks. Adjust them if you need to buy go and order top to Edit Shape. And when you are done with this task, Let's just tap on the screen to get away from this editing mode and let us get back to our layers. And for 1 s, we will just go and hide our layer with the sketch. We will go all over these places, all over our elements for the facial features and we will make sure that all of them are clean and looking nice. So eating it to adjust some of them, just grab an eraser tool and adjust that. And when you're done adjusting these elements, we are done with our first illustration. In the next part, we will be adding the colors to our little ghost. 10. Ghost Popsicle: Base Colors: Start with this part. Let's firstly go to our layers and we will collapse that group with cat lollipop. So let's select the whole group. And you can see that near the chat box we have a little V icon. So let's tap on it. Now when everything here is nice and clean, Let's just create one more layer. So tap on the plus icon and straightaway, Let's rename it as stick. While we're still here ledgers unhide earlier with this gauge. And as you can see, we are again starting from the bottom part. Now on the layer with this Tikal edges go and select the color for it. Firstly, it will be pale brown and we will go and create the outlines here. So let's just start by going and repeating the lines. You can adjust the size of your brush. And all you need to do is to repeat what you have on your sketch. Just create the straight lines, just create a little curve and make the whole shape closed shapes. If you need to, you know what you need to do. You will need to hold your Apple pencil at the end. If you need to adjust it even more, go up to Edit Shape. If you have some very straight angles and grab an eraser tool and adjust them. When we have this curve on the bottom, Let's just go over the top and let's connect these two shapes together. We will just go a little bit about the shape and we will create a line here when we have it ledger, drag and drop the color inside of it. And when we are ready, allege us, get back to our layers and let's create one more layer. So we are tapping on the plus icon and straight away, Let's rename it as base. Now when we have two layers for these elements, ledger select them both and legend group them. We will rename the group as ghost popsicle. Now let's get back to early with the base and we will go back to our color palettes and we will select the color with the name pale orange. We will need to recreate this shape that we have under the blanket. So let just go the same way as always and we will create our lens, try to make smooth connections. And when you have the bottom part, outlined ledgers create the big line going on the top. We just needed to color these middle parts. So let's just go make sure that this whole shape is closed. And when we did it, ledgers drag and drop the color inside of this shape. Now when we have it, we will go back to our list and we will create one more layer above layer, just rename it as sheets onto this layer, we will get back to our color palettes. We will select the color with the name White, and we will just go and repeat all the elements that we have here. Let's make this sheep closed. When we have created our outline layer, just drag and drop the color. And now we have recolored everything that we need. Ledgers, make sure that everything is looking nice so we go into our layers. We will hide early with this gauge. And if we need to adjust some elements, we will go along them and we will adjust that. And when you are done with this task, let just go to the next part where we are going to be adding the shadows. 11. Ghost Popsicle: Shadows: To start with this part, ledgers get back to our layers and we will firstly go to our layer with this tick. So let's select it and let's create one more layer above. We are tapping on the plus icon and straight away, Let's rename it as shadow. Let's clean this layer to a previous one so we are tapping in it and we are choosing clipping mask. Also, we will need to go to this icon. We will need to select multiply blending modes and S4, the opacity. Let's for now leave it at 50 per cent. When we have it, we will get back to our Canvas and we will need to select the same color that we have for this tick. You can do it by going to the color palettes and selecting it from here. Or you can invoke the eyedropper tool and select the color that you need from your canvas. Let's just hold one of our fingers there. Let's select this brown color and let's go to one of the sides. So e.g. the right one. And let's just create a little shadow. Firstly, let's create a vertical one. So that way we will just repeat the land that we have, our right, and we will make a little curve going down. When you hand this little shadow ledgers go underneath our main sheep on the popsicle, and we will create another shadow here. Let's just increase the size of our brush and let's create a line like that. You can hold it at the end. You can adjust it to your liking. You can make it thick, you can make it thin. It's all up to you. When you are done ledger step on this green and let's continue edit our shadows. So we will go back to our layers. We will go to earlier with the base, we will create one more layer above it, straightaway, renaming it as shadow. Let's click this layer to a previous one so we are tapping on it and choosing clipping mask. When I go into the icon, we are selecting multiply blending modes. And for the opacity, Let's set 35 per cent. Now we are doing back to our Canvas. We are selecting the same color that we use for the base. And we will go underneath this little blanket and we will repeat it shapes here. Again, you can play around with the thickness and when you have just one line, you can just go manually and recolor the rest of the areas. And so when you are done with this task, ledgers get back to our layers and ledgers guilty. Earlier with the sheet, we will create one more layer above. We will tap on it and we will rename it. So let's just write down shadow. Let's clear this layer to a previous one, tapping on it, choosing clipping mask, go into the an icon and select and multiply blending modes. Now going back to our color palettes and select in light gray color. And one more thing that we will need to do here, we are getting back to our layers and we will unhide our layer with the sketch. That way we will know where we need to put our shadows. Let's firstly go and decrease the size of our brush. And let's just add this little shadows to our inner parts of the ears. So let just go along them and let's create this inner parts. And when we did it, let just go and add a little shadow to make sure that we have this little curl here. We will go along the shape and we will just create a line here. When we have this line, we will go to the bottom parts and we will create little shadows going from the quantitative parts of this little sheet. So let's just go and create little triangles like that. You can play around with how big they are. And also, if you have more of these concave parts, you will just go and create all of these lines alone, all of them. When you have the outlines, ledgers go inside of these shapes and let's recolor them. And now when we have all of our shadows, we will just get back to the layers and we will hide our layer with the sketch. We will make sure that everything is looking nice. And if we need to adjust some places, we will just go and adjust them. So lets just grab our eraser tool and ledgers go and adjust all the places that we need to adjust. And when you are done with this part, ledgers continue by going to the next part where we are going to be aiding the facial features. 12. Ghost Popsicle: Facial Features: Let's begin by going to our layers and we will create one more layer above our layer with shadow of the sheets. So we add tapping on the plus icon and straightaway, Let's rename it as facial features. While we're still here into our Layers panel alleges, unhide our layer with the sketch. When we did it, we are going back to our color palettes and we will select the color with the name dark brown. Now when we have ever been prepared, like just get back to our canvas. Let's zoom it into the facial features. Let's decrease the size of our brush and we will start by creating the outlines for our ice. The same way as always, we are just creating it with one line. We are holding it at the ends to adjust it to a better shape. And we will go inside and we will manually recolor this part when you hand the eye on one side, Let's move on to the opposite side. And let's do the same thing here. So we are creating the line, we are holding it at the end, adjusting its angle, its size, everything, and then go inside of this shape and creating the color inside of it. Now, let us decrease the size of our brush just a little, and we will repeat this line for our mouth. You can start by creating a half over them out. Hold the line at the ends, adjust its angle, adjust its placement, everything that you need to adjust, adjusted. And then we will go to the opposite side and we will do the same thing here. Try to make them equal on both sides. When you are done, we will go back to our color palettes and we will select the color with the name background. With this color, we will add the color to the cheeks. So let's just go and repeat our little cheeks here. Tried to make the cheeks equal on both sides, tried to place them similarly. And when you have everything that you need, ledgers go inside and let's recolor this inner parts. Now we are done with our second illustration. So let's just take a look whether elephant is looking. Alright, we will get back to our layers and we will hide our layer with the sketch layer. Just make sure that everything is okay. And when you are done, we will continue creating. Our character is aiding the colors in the next part and who will be working on to our scarecrow? 13. Scarecrow: Base Colors: Let's continue editing the colors to our next element. So firstly, we will just go to our layers and we will collapse our group with ghost popsicle. Let's select it and let's go to this little v icon near the chat box. We will tap on it. And when we did it, we will create one more layer above layer. Just tap on the plus icon and straight away, we will rename it as stick. So tapping on the layer and choose Rename when we did it, we will just get back our layer with the sketch. We will unhide it. We will go to our color palettes and we will select the color with the name dark brown. And again, we are starting from the bottom layer, just go to this bottom part and let's create this thick. You can start by creating an outline and then drag and drop the color inside. Or you can just go and increase the size of your brush and just create one line, hold it at the ends, position it correctly and when you are done, Let's just get back to our layers and let's create one more layer. We will name it wrap or cooler. Now when we have two layers, let just select them both. And legend group that when we did it, we will go to our group, we will tap on it. We will choose Rename, and we will rename it as scarecrow. Now getting back to earlier with rap or cooler, and we are going back to our color palettes and selecting the color with the name whites. Now what we need to do is to go there to this wrap or a cooler area. We will need to create our little outline and we will just drag and drop the color in sight. So let's just go and very quickly do that. When you've created the outline on the boards and make sure that you made this whole shape close so you will need to connect the lights when needed it, we will need to go back to our top-right corner and we will just drag and drop the color. Now when we have it led, just go and continue by going to our layers. We'll create one more layer and we will rename it as face. Let's just tap on it and let's choose Rename. Now we will get back to our color palettes and we will select the color with the named pale orange. And with this color, we will go and create an outline for our main shape of the hat. Let's just go and do that. As always, you can create just parts on the lines. You can hold them at the end and create the outline in that way. Just make sure that all of your lines are closed and that they are nice and smooth. And it's all played jazz connect the lines. Let's make sure that the whole shape is closed. And when you make sure ledgers get back to our top-right corner and let's just drag and drop the color in set. When we did it, you know what we need to do? We will just go back to our layers and we will create one more layer. We will call it hat. When we have this new layer, we are getting back to our color palettes. We are selecting the color with the name dark brown. And we will go and create the outline for the whole shape of our hats. Like just go and do that. When we have all the lines ledger, drag and drop the color to the areas. Now to make sure that we created our top part of the head correctly, let us do the following. We will go to our layers. We will go to our layer with the face. We will tap on it and we will choose, Select. We don't need color fuel right here, so we can just tap on it. And when we have this selection, we will go back to our layers. We will go to r hat, and we will just go to this part on the left and we will erase the part that we don't need suggests very accurately, just go in here and erasing this part. Let's make sure that we don't need to erase anything on our rights. If we need, we will just go and erase it. When we are done, Let's deselect everything by hitting R S ribbon icon on the top-left. And when we have it, we are ready to add some details and ledger started by adding these dividing lines to our fees. Firstly, let us go back to our color palettes and we will select the color with the name dark orange. And when we did it, we will need to get back to our layers and we will go to our layer with the face. Let's tap on us to select, and let's do the following. We will tap on it one more time and we will select Alpha Lock. When I turn on Alpha lock, that means that we are working only on the areas that we already have wanted this layer. So it works similarly to our clipping mask, but you are working on the same layer. So when we turned on our alpha lock ledgers, grab our color ledgers, grab our brush, and let's just go and repeat the lines that we have on our sketch. We won't be going beyond the frames, will be working on the inside these shapes. Let's just go and create these slides the same way as always, just hold the line and the ends. Tried to recreate what you have on this gauge. If you need to adjust it, you already it's up to Edit Shape, clearance with the curvature, play around with everything you want to play around with. When you're done with the first-line, ledgers go over the opposite side and let's create another line. And to make sure that everything goes smoothly, allege us get back to earliest and just for 1 s, we will hide our layer with the sketch. Now, if you need to adjust some parts, let's just grab the same color. We are not using the eraser tool right here because we will be just erasing the parts. We will just need to select the same color. So e.g. we will go to this little place. We will invoke our Eyedropper Tool, and we will just go over this little place and we will recolor it. When you are done with this task, ledgers get back to earlier is allege us get back our layer with the sketch. We will unhide it. If you want. You can go back to your layer with the face and you can turn off alpha lock. Let's just do it. We will tap on it and we will choose Alpha Lock from the lease. And now we will add one more detail to our hats. Let's get to earlier with a hat, we will tap on it and we will turn alpha lock on this layer. When we did it, we will get back to our color palettes and we will select the color with the name dark orange. When we did it, we will go to the bottom part of our top part of the hat above the rim, and we will create the first-line their legislature and do it very accurately. Try to make a nice divider between these littering and the main shape of the hat. And when you have it, we will just go above it and we will recolor these parts. You can increase the size of your brush and we will just go to the middle part of this big shape that we will be recovering. And we will just create another line here. Adjust the curvature if you need to, and if you have some little part that you need to recolor, let's just go and manually do that. When we have the first-line lead to select the different colors. So we can just go to our main shape of the hat and we can invoke our eyedropper tool and select this color. And it will go above the top and we will add another line here. So the same way as before, just go and very boldly here and creating the line a jazz the curvature. If you need to, end to end, you have this line. Let just go below its end. We will recolor this little piece. And when you have these Dan ledgers, grab our color with the name White. And with this color, we will just go and create this little shape of the rectangle. So just go in there and with one line we are creating the shape. Hold the line and the yen to snap to a better shape. And if it's not a rectangle, we can go over the top to Edit Shape and we can select it from here. We can adjust its size and if we need, we can just tap on the screen and adjusted later on manually. So if you have some gaps, lead, just go and create this straight line going down. When we have something like that, let us get back to the earliest. We will hide our layer with this gauge and we will check out whether everything is looking quite nice. If it is, we will move on to the next chapter where we are going to be aging our shadows. 14. Scarecrow: Shadows: Left eye this part by going to our layers. And firstly, we will go to early with this tick. Let's select it and let's create one more layer above. We are tapping on the plus icon and straightaway, Let's rename this layer as shadow. So tapping on it and choosing Rename when we have this layer rename slide, just clip it to a previously. So we are tapping on it and we are selecting Clipping Mask from the list. When we did it, when I go into the n icon and we are selecting multiply blending modes for the opacity. Let's leave it at 50 per cent. When you are done, ledgers get back to our canvas. Let's select the same color that we have for our Stieg. We can just go back to our color palettes or from our canvas, we can invoke our eyedropper tool and select the color that we need. When we have the unit color. Let's just go over one of the sides, e.g. there, right? One. And let's create a little shadow here. We will do it very easily by creating one line going from top to the bottom. You can play around with the thickness of your shadow, cool july at the ends just adjusted to your liking if you need to move it or if you need to adjust it even more, go over the top to edit shape when you have the first shadow ledger, zoom in our canvas and let's go under our cooler and we will go there and create a little shadow, the shape that we have a right under our cooler. So we are just repeating this line. Again. You can play around with how thick this shadow will be now when I'm done with the first shadow. So I just get back to our layers. Let's go to our layer with rap or cooler. And above it we will create one more layer. Again, we are tapping on the plus icon and let's rename this layer as shadow. Let's clip it to previously. It's happened choosing clipping mask. And then we're arguing to the n Eigen and we are selecting multiply blending mode for this layer. Let's leave the opacity at maximum. When we did it, let us get back to our color palettes and we will select the color with the name light gray. Now, if you want, we can get back to our layers and we can unhide earlier with this gauge. It's easier for you in that way. What do we need to do? We will need to go to our color elements. We will need to zoom in our Canvas and we will go to this concave parts from them, from the bottom, we will create a little triangle. Let's just go and do something like that. When you have it on the first concave part, alleges go all over all of them and we will create this little triangles to check out whether everything is looking fine. Let's just get back to our layers. Let's hide our layer with the sketch. And if we need to adjust some elements, we will just go over them with our brush. Or if we need to erase some parts, we will grab our eraser tool and we will erase this part. When everything is looking fine, alleges get back to our layers. Let's go to earlier with the face and let's create one more layer above. So again, tapping on the plus icon to rename the layer as shadow. Let's clear this layer to a previous one. So tapping, choosing clipping mask, go into the icon and select multiply blending mode. For the opacity, Let's go with 50% when we add down. So it's an earlier ledgers. Get back to our canvas. Let's select the same color that we have for the body of our face. So we are invoking our eyedropper tool and selecting the color. And firstly, we will go over the boards and parts and we will create a little shadows there. Basically what we need to do, we will go firstly to one of the segments and we will create a curve like that. You can hold it at the end. If you need to adjust it, you know what you need to do. You will need to go over the top to aided shape. When we have the first curve like that, we will go to the next segments and we will create another curve like that. Again, hold it at the end, a jazz the curvature. It's all up to you when you have these curved alleges continue and create one more on the right side. Again, just go into this intersection and creating these big concave curve. When we have all these little curves, let just go underneath them and we will manually recolor this area ends when we are done with the boards in part. Let's move on to the top and we will do the same thing here, but this time the direction will be reversed. So firstly, let's just go over our left part and we will create a curve like that, hold it at the end, and ledgers continue creating this little curves. So basically we are just mirroring what we have on the water ends when we have the outlines, let just go to this part on its own and we will manually recolor it. And when we replace it with this task, lead us move on to our next layer and let's create one more layer above earlier with the hat. Go into this layer, tapping on the plus icon, renaming it as shadow. Let's clip it to previous layer. So tap on clipping mask, go into the icon and select and multiply blends in melt opacity at 50 per cent. Firstly, let us go over our orange part with the same color that we have right now. And we will just go and create a little shadow there. And when we have this little shadow, we will go and select the same color that we have for the main color of our hats. So let's one more time invoke our Eyedropper Tool and we will create a peculiar a shadow here. So firstly, we are just connecting our new shadow with a shadow that we have on the bottom. We are creating a little line like that. When we had this line, we will go and create a little curve going in that direction and another curve going more to the right. And when we have it, we will go to the bottom with a straight line. And then we will go and create another line that will recreate the same curvature that we have on the bottom of this little hook. So something like that. And now we will go underneath this little outline that we have created and we will manually recolor it. And the last shadow that we will add will get at the back part of our hats. So we're just given Firstly over our left part and we are creating the line like that and all the rest of the area we will recover manually When we haven't done one side. Let's do the same on the opposite sides. So firstly, just elongating the line that we have going through the top part of our hats. And when we have this little while, we will go to the rest of the area and manually we will recolor it. And when we did it, we are done with our shadows. So in the next part, we will add the facial features. 15. Scarecrow: Facial Features: Start with our facial features. Lead, just make sure that we have this color selected dark brown. When we have it, we will just get back to our layers and we will create one more layer above earlier with the hatch shadow. So tapping on the plus icon created a new layer and rename it as a facial features. Now let's turn on our layer with this gauge so we will know where we need to boost our little facial features and when we did it, let us get back to our canvas. Let's zoom it in and let's start aging our facial features. So firstly, let us start from the eyes. So we will just go and increase the size of our brush. And we will put these two dots. When we have them, we will grab our eraser tool. We will adjust its size and we will go and cut this little piece is that we have cut onto our sketch. When we are done with this, we will get back to our brush and we will repeat the shape of the notes. So again, we are just creating the outline and then we will drag and drop the color insights. So when you have the outline layer, just drag and drop the color. When we have our unknown sledges go entropy the shape of the mouth. So let's just increase the size of our brush and we will create this curve. Hold it at the end if you need to adjust it, go over this up to Edit Shape. When you have the shape that you like, ledgers tap on the screen. Let's decrease the size of our brush and let's create these lines for this teaches. And when I'm done with the mouth ledgers, get back to our color palettes, and let's select the color with the name backgrounds. And with this color, we will go and create our cheeks. If you want, you can just increase the size of your brush and create little lines here. Or if you want, you can start by creating outlines and then by dragging and dropping the colors insights Try to keep the size and the position of the cheek similar on both sides. If you need to adjust them, go over the top to edit sheet. When you are done with the outline layer, just drag and drop the color insight. And now when we are ready, allege us, get back to our layers. Let's hide our layer with the sketch and let check out whether we need to adjust some places. And if we do, we will just go and adjust that. And when everything is looking fine, we are ready to move on to our last illustration. 16. Bat Cookie: Base Colors & Shadows: Let's start this part by going to our layers. And firstly, we will collapse our group with scarecrow. So let's select it and let's go to this little v icon near the checkbox and we will tap on it. When we did it, we will create one more layer above. So let just tap on the plus icon and let's rename this layer as top. Now let's unhide the layer with the sketch, and we will go back to our color palettes and we will select the color with the name pale brown. With this color, we will go over the top part of our beds and we will recreate this outline. So let just select the size of our brush. Let's go along the lines and we will just create the outline. Remember that you don't need to create the whole lines with just one line. You just need to create the parts of them. You will need to connect them smoothly and you will need to make a nice outline. And to remember that you will need to make it close. So let just go all over these little lines over the soap and we will create these outlines. When we have the outline ledgers get back to our layers and just for 1 s, we will hide early with this gauge and we will check out whether everything is looking nice. If you want, you can go all over these very straight corners and you can adjust them and turn them into curves. Let's make sure that everything is closed. And when we did it, we will get back to our layers. We will unhide earlier with this gauge and let just go and drag and drop the color into this area. So just go into our top right corner and we are dragging and dropping the color. Now when we have these, we can go and manually create the same thing for the bottom cookie, but we can start by adding the shadows to this little piece that we have over the top. And then we can just copy it and put it on the bottom. So let's just do it in that way. Firstly, we will just go back to our layers. We will create one more layer above earlier with the top, we will rename it as shadow. We will need to clip this layer to a previous one. So let just tap on it. Let's choose clipping mask. We will go to our icon, we will choose our multiply blending modes. And ledger said the opacity at 50 per cent. Also, while we're still here into our layers ledger select both of these layers and we will group them. We will rename the group that cookie. And now we're getting back to earlier with the shadow. Get back to our Canvas and we will be going to the bottom part, which is our thickness bite and we will add some shadow here. Let's just give a repeat this line that we have ordered. So part and we will create the shadow under this area. When we have this outline, let just increase the size of our brush and let's manually recolor this bottom part. When we did it, let us get back to our layers and we will hide our layer with the sketch to check out how it looks without this little sketch. If you think that maybe the shadow is too bright, we can always get back to earlier with the shadow, go to the m, I can adjust our opacity to our liking. E.g. we can leave it at something like 20 per cent. When we did it, we will get back to our sketch and with the same color, we will go to this little parts that we have over the top. We will recolor them to the ledger, decrease the size of our brush. And let's repeat these lines that we have and we will drag and drop the color insight. If you want to add more details, you are welcome to do it. And when we have these, we are ready to create one more layer above. We are ready to snap it to a previous layer and we are ready to add some details. So firstly, let's just go to our group with that cookie we will select earlier with the shadow and we'll create one more layer above layer, just rename it as details. Let's clip it to previous layer. So we are selecting it, we are choosing clipping mask. We will get back to our color palettes and we will select the color with the name dark brown. With this color, we will go to the inside part of the ears and we will add this little elements here. So just repeat the shapes of your main shape of the ear and try to make this elements equal on both sides. And when we are done with the ears, we will go to this edge that we have our shadow on, and we will be adding some details here. So we won't go to this concave parts and we will be adding some lines going down. And that way we will add a little bit of volume here. We can do it manually by just go in and creating these lines going down. Or we can make it very accurately the same way as we have created these lines. So we will go to Arrange, I can over-the-top and we'll go under Canvas. We will turn on Drawing Guide, and we will go to Edit Drawing Guide. We will be using 2D grid, but we will need to rotate it the way our lines on the grid are similar to the lines that we have on the sketch. So we will need to go to our green node over the top and rotated. So the line that we have on this gauge going in the same direction that our grid when we did it, we will go over in the bottom and we will turn on assisted drawing. When we did it, we are hitting down over the top right. And now to make it even accurately, we will go back to our layers. We will go to our layer with the shadow. We will select it and we will tap on it and we will choose, select from the list. You can see what is happening right here. We will need to go back to our layers and we will need to go back to our layer with the details. And now in that way we will be adding the color only on to the areas that we have on this layer with the shadows. So very easily ledgers Gil firstly to our middle part right here between this little lax, we will add little lines going like that. So basically we are stepping a little bit from this slide that we have on our sketch and we are shading this area. And when we did it, we will go over the right part and we will add these lines, these little shadow to this concaved parts. We are stopping, not going too far from this line that we have on our sketch when we have this shadow, Let's move on more to the right, to the next concave part. And we will add these lines here when we have them on that side. Let's move on over r, right? And let's add these little shadows to the left part. Firstly, ledgers go to this line that we have right here, and we will add a little shadow in that way. Try to be accurate and don't go to this lizard parts that we have onto our shadow layer on the top part, if you just went a little bit beyond the frames, grab an eraser tool and erase this little piece ends when you have these shadow ledgers go a little bit more toward the left part to the next concaved parts. And let's add a few lines here. And when you have something like that, let's just deselect everything by hitting R S ribbon icon one more time. Now we don't need our assisted drawing anymore. So let's just get back to our arrange icon. Let's toggle Drawing Guide from here, and let us get back to our layers. Let's go to our layer with the details, tap on it and choose Drawing Assist from the list. Now, let us turn off our escapes to check out how it looks. And if you think that maybe it is too bright, we can always just get back to this an icon onto earlier with the details and adjust the opacity. So probably something like 45, 50 per cent will work better. And when we have this whole topic cookie Dan, we will go back to our layers and we will need to make a copy of it and position it on the bottom. So what we will do, we will go to the whole group, we will select it, and we will swipe it from right to left and choose Duplicate. Now, you can see that we have two groups with that cookie and we will go to one of them, doesn't matter which one. We will just need to rename it as bottom. I just tap on it and let's choose Rename. And we will need to grab this whole group and position it onto our main group and the early, which is named top. So let's just grab this whole group and ledgers go and drag it down. And when we have one of our groups inside the other main group, we will go back to our layers. We will just go back to earlier with this gauge and we will unhide it. Now, when this group which is named bottom is selected, we will go to our Transform tool, which is our arrow key. On the top-left, we will use uniform method and we will just drag it to the place which it needs to be on. And when needed It's ledgers, deselect everything by hitting our arrow key. Now, we will need to go and adjust it just a little bit. So we will go to this layer which is called shadow, and we will erase these lines that we don't need. So let's just go grab our eraser tool and we will erase these additional elements. When we have two cookies, we are ready to add the feeling. We will go back to our layers. We will select this group which is near the bottom and above it, we will create another layer. Let's just tap on the plus icon and let's rename it as feeling. Let's get back to our color palettes and we will select the color with the name White. And with this color, we will go to this bottom part of the feeling and we will create our feeling here. So let's just go and repeat the lines that we have here. If you want, you can create the whole feeling, not just the bottom part of it. And later on we can just recolor it with a different color. So let's just do it in that way. We will just go inside of this shape and we will repeat the lines that we have here. When we have this outline which we made with the white color, we will just go back to our layers and we will hide our layer within the top, which is on the top. We will go and we will add this line to combine the whole shape together. So we will need to make a closed shape. So let's just go and create some lines that will connect our lines on the sides. And when we are done, ledgers drag and drop the color insights. Now we can just get back and get back earlier with it soap, so ledgers unhide it. And when we had this feeling, we will need to add a different color on the top part. So let's just go and create one more layer above, and we will clip it to a previous layer. So tap on the plus icon and renaming this layer firstly as feeling too, let's cleave it to previous layer so it's happening, it's choosing clipping mask. We are not changing our blending modes. We are using normal and we will just go back to our color palettes. We will select the color with the name pale orange, and we will go to the top part of the sheep and we will recolor it. So just go in there and creating this line that we have in the middle part. And when we have this line, we will increase the size of our brush and manually recolor that. So part. When we did it, let us get back to our layers and let's check out how it looks without the sketch. If everything is alright, we will need to go to this feeling parts and we will need to add this little shadows that are on the edge. And the same way as we did with our main shape of the cookie. So let's just go to our layers and let's firstly go to our layer with the white feeling. We will select it and we'll create one more layer above. You can see it's automatically clipped to a previously. That's because we have one more clipping mask on the top. Now, we will need to go to this icon and we will need to change the blending mode to Multiply, we are using the maximum opacity. When it's done, we will rename this layer as shadow. Now we are going back to our color palettes and we are selecting the color with the name light gray. When we did it, we will go back to our wrench icon. We will go under Canvas and we will turn on drawing guide here. You can see that the direction of the cells is what we need. When we have it, we will go over our edit drawing guide and we will turn on assisted drawing. We did it. We are heating Dan and we will go right underneath our shadows on the main shape of the cookie. And we will create the lines going in that direction. So let just go and end this little shadows on our white areas. When we are in Zan ledgers, go back to our layers ledgers guilty earlier with feeling too, we will create one more layer above. We will rename this layer as shallow twos. So tap, rename and write down the name. Let's clean this lead to previous one tab and choosing clipping mask, go into the icon, select multiply blending mode for the opacity going with 50%. Now we will get back to our color palettes. We will select the color with the name pale orange. And also we will need to get back to our layers and we will need to manually turn on assisted drawing onto these new layer shadow too. We will tap on it and we will choose Drawing Assist. And the very last thing that we will need to do here is to select our area with the orange, fill it. So we go into our layer with feeling to the orange one, we add 7.8. We are choosing selects. When we did it, we are getting back to early away the shadow too, which is assisted layer. And now we can just get back to our canvas. We can just go and create this little shadows. And the same way as we did with the white areas, we will just go near them, above them, under our shadows on the cookie. And we will create these lines with this bright color ends. When we aren't done, we can deselect everything by hitting R S ribbon icon and we can turn off our drawing assist. So let just go back to our range icon and let's toggle Drawing Guide from here. When we are done with this task, we are ready to move on to the next chapter and we are ready to add our facial features. 17. Bat Cookie: Facial Features: So to start with our facial features ledgers, get that to our color palettes, and let's select the color with the name dark brown. When we did it, we are getting back to our layers. We are going to the top of this group with bad cookie to the layer which is called details. We'll select it and above it, we will create one more layer which we will rename as facial features when we have it ledgers get back our layer with the sketch. So we will just go to this little icon with the chat box and we will unhide it. Now, let's just zoom in our Canvas. Let's grab the size of the brush that is suitable, and let's start aging the shapes of our ice. Create them just with one line, hold the line and the end. You need to adjust the whole shape, go over the top to Edit Shape. Try to make these shapes similar on both sides. Then just manually go inside of this shape and recolor it. Now when we are done with our eyes leg just go and firstly, add the lines for our things. So we are getting back to our color palette. We are selecting the color with the name White. Let's decrease the size of our brush. And let's create this little triangular shapes. If you need to adjust them, just grab the eraser tool and adjust them. When you are done with the things ledgers get back to our color palettes. Lead, select the same color that we use for the eyes, which is dark brown. Let's decrease or increase the size of our brush. And let's repeat these lines that we have for the mouth. As always, hold the lines at the ends, adjust the shape by going over the top to Edit Shape, do what you need to do here. Try to make these shapes similar on both sides. And when you have the mouth, Let's just go back to our color palettes and let's select the color with the name backgrounds. And with this color, we will recreate the cheeks. Again. You can just increase the size of your brush and create the little lines here. Or you can create a little ellipsis and add the color inside. It's up to you. Try to make the shapes equal on both sides, a jazz them if you need to. And when you have the outlines layer, just drag and drop the color insights. And two, and we are done with this task. Let's just get back to our layers and let's hide our layer with the sketch. And we will check out whether everything is looking fine. If you don't like some elements or if you need to adjust some places, just go over them and adjust that. And when they have added their face, we are done with our last illustration. So now let us get back to our layers. Let's unhide our layer with this gauge. If we want, we can just go create one more layer and we can create these little elements of candy corns. So let's just meet in the next part and we will finish up the whole illustration. 18. Final Beautification: Let us get back to our layers. Let's just select our layer with the bad cookie and we will create one more layer above. We will call it miscellaneous. And onto this layer we will just get back to our color palettes. We will select the color with the name pale orange. And we will just go all over our additional elements and we will it create them with this color. So let us firstly go and create the outlines, and then we'll drag and drop the color in sets. When you have the outlines, Let's drag and drop the color. When we did it, we will get back to our layers. We will hide our layer with the sketch. We will grab our eraser tool and we will adjust our shapes when you're satisfied with your miscellaneous achieved. So the candy corns let just go and add the different colors to them. So firstly, we are just going back to our layers. We will tap on this layer and we will choose alpha lock. When we have selected Alpha lock, we are going back to our color palettes and we are selecting the color with the name dark orange. When we have this new color, Let's increase the size of our brush. And let's just go to the middle part on this candy corns and we will add another layer of color. We will just create the curve like that. When you haven't done one element lead, just go all over the rest of them. And let's create this little lines there. When we have that sled, just get back to our color palettes. Let's select the color with the name whites. And we will go to the top of this candy corns and we will add this color there. And when you are done with this task, e.g. we can get all over our Canvas and we can add some sparkles. You can find these browsers that we are gonna be easily right now under the resources. So just grab this sparkle brush and with the same color. Let us firstly go to our miscellaneous layer. We will need to turn off our Alpha. Look. Let's just tap on it and let's choose Alpha Lock from the list. And now when we are free to draw everything on this layer, Let's just go to some places and let's add some sparkles. And when you are done aging this particles, we are done with the whole illustration. Thank you for watching this class. Leave a review if you liked it and consider subscribing for mortal diabetes in the future, looking forward to seeing your projects.