Cloudy with a Chance of Cuteness: Drawing Kawaii Weather Characters in Procreate

1. Introduction: Hello, everyone. I'm uni, and into the class will drop cute weather stickers. This class doesn't require any prior experience or fancy tools. We'll start from scratch and we'll be using simple techniques throughout the process. Everything you'll see will be happening in Procrit. However, if you have other software or want to try traditional materials, you are welcome to join. If you're ready to start, let's jump right into it. 2. Sun: Let's begin this class, firstly, by deciding what kind of canvas we are going to be using. Today we are using a simple standard square canvas that you can find in procreate. Both our pixel width and pixel height are set at 2048 pixels. ODPi are set at 300 and our color profile is set as SRGB we this low number. When it's all done, let just he done over our top right, we will be redirected to our canvas. Let zoom it out a little bit, so we will see the whole canvas. Then the first thing that we will need to do is to decide what kind of colors we are going to be using throughout the whole class. If you want, you can use your own colors, but if you want to follow along, you can go to the project and your stab and download all the materials. When you did it, let us go and select the color for our background. We will go to our layers and we'll go to our background color layer. On the bottom, you can see we have our new color palette. But for us, it'll be easier to go under palettes right here on the bottom right and choose cards into this window. Here we have all the colors names and it will be easier for us to navigate through them. The first color that we are selecting is our color with the background. We will tap on it, and we will change the color of our background. When we did it, we will need to go to our brush library. We'll go to the calligraphy folder, and we will choose monoline brush. When we are here at our brush library, let's just go and tweak one option of our monoline brush, so all of our lines are very smooth. We will tap on our monelin brush and we'll go inside the brush std. On the left we'll go under stabilization, and here on the top, you can see we have the option streamline that has a slighter amount. We can go to our drone pad when it set a very low amount and see how it works and how it looks. We are creating a line, we have a lot of control over it, but it is quite jagged. It's okay if you want to use your lines in that way, if you want them to look very natural, it's up to you. But if you want your lines to be very smooth, you can just go to this option amount and you can adjust it. For example, let's just set it at maximum and let's try onto our drone pad. You can see we lost a bit of control over our line, but our line is very smooth. You can decide how much of streamline you want to use. You can go back and forth, try it out onto a canvas, get back to your brush std and adjust this option if you need to. For now, let just adjust it to your liking and when you are done, let just it down over our top right. Now when we have our brush, let just go and pick the first color for our first illustration. We are going to this icon on the top right. One more time here we are going under cards and we will select the first color with the name yellow. When we have it, we will go and create the first outline. Let's just go to our canvas, and we will create a line of the ellipse that will go through the whole sap and we will hold it at the end. You can see we snapped our sap to a better shape. We can make it bigger or smaller by moving our apple pencil from side to side. We can rotate it if we want to. For now, let's just keep it at the size, something like that, and then we'll go over the top to the popped up option ellipse. Here you can see we have the option circle. Let's just tap on it and we will snap our shape to a perfectly round circle. Now, when we did it, let's just get away from our editing mode, so we will just tap on the screen either with our apple pencil or with one of our fingers. Now when we have this first outline, let's just go to the same icon that we have on the top, and we will just go and drag and drop the color right here in the middle of our she. Now, what we need to do is to go and put this element right in the middle. Let's just go to our arrow key on the top left. You can see now we have the bounding box and this little window on the bottom. We'll use the uniform method, and also we will just go under snapping into the settings, we will turn on snapping here too. So now, when we are going to our canvas and if we hold our Apple pencil, we can just find the center by following these two orange lines. Let's just go and find them, and when we found them, we are right at the center of our canvas. When you have the position of your element like this, let's just go and deselect everything one more time by heating on our arrow key. Now, when we did it, let go and add a little outline for this elements. We will do it in that way. We will go again to our layers and we will make a copy of this layer. To do that, we will need to swipe our layer from right to left and choose duplicates. Now, we will go to this layer that we have on the bottom, and we will go again to our color palettes and change the color to orange. We will then go to this little icon, and we will drink and drop the color into this area. Now, you can't see anything, but if you go again to your layers, you will see that these two layers have different colors. What we need to do next is to select this layer that we have on the bottom, and we will go again to our arrow icon. We will use the same uniform method, we will use snapping and we'll just go and make this element a little bit bigger. Let's just go to one of the corners, for example, to the top right and we will just drag it up, so we will make the whole shape a little bit bigger. When you have something like that, we'll need to position this element again right in the middle, so we are doing the same thing as before. Just finding these two lines. When you have the result like that, let go and deselect pin by hitting our arrow key. By the way, you can change the size of this element to your chin, you can make it very thick or very thin. It's all up to you. When we have the result like that, let's just add the rays of sunshine. One more time we are going back to our layers and we will create one more layer by tapping on this plus icon. When we have this new layer, we will use one option that Procreate has. Let just go under range icon, we will go to the canvas and we will togal drawing guide here. We will go under age drawing guide, and we will go under symmetry right here. We will go under options and we will select either quadrant or radia. Also, we will just need to togo rotational symmetry. You can decide which option you want to use, you can try out onto the canvas and if you don't like it, just get back here and adjust it. When you did everything that you want, let just go and heat done over our top right now with the same color that we have, with the size of the brush is around 4% or 5%, we will just go and start creating the lines that will represent the s. Firstly, let's just go to the top and let's create a line going up in that way. We will hold it at the end. We can adjust the placement of it, it's all up to you. For now, let's just keep it at something like that. When we have it, we will go to the rest of the areas and we will create another lines that will be similar to what we have right here. But we can vary the size of them. We can vary the amount and everything that we want to wear here. For example, let's just step a bit from this first line and we will go and create another line that will be a little bit smaller. We are again holding it in the ends, and when we have something like that, let's just go and add one more line. You can decide whether you want it to be bigger or smaller. Find what works for you. And when you are done, let go and turn off this option because we don't need it anymore. One more time, we are going under range icon, and we are togling drawing guide here. Now, we will need to go to the layers, and you can see that our number three, where we have our race is assisted. We will need to tap on it, and we will need to turn off drawing assist by choosing it from the lease. When we did it, we can make sure that we like our se. For example, we can go and adjust them. When this layer is selected, we will go again to our arrow icon, and we can go and make it smaller or bigger or find what works for you. For example, let go and make it a little bit smaller. But when we did it, we will also need to go and put it right in the center. We are again looking for these two orange lines, one vertical and one horizontal. When you found them, when you are satisfied with the result, let just go and deselect everything by heating our arrow key. Now, when we are done with this, we are almost done with our sun, but let's just make it a little bit more interested. What we are going to be doing? We will go again to our layers, and we will go to our layer number one, where we have this little outline. We will then go to our eraser and we will go long this outline and we will add some gaps. You can decide whether you want a big size for your brush or small and let's just go and add a few gaps like that. We are just going through the whole shape of our elements, and we are just adding a few elements like that. When you did it and when you are satisfied with everything here, let's just go and add more details. Firstly, let's just go to our list and we will select all of these three layers. For us, it will be easier to work with that. When the first layer is selected, we are going to the next one and we are swapping it from left to right. When two of them are selected, we are doing it with the one layer that is remaining. When we have all three layers selected, we will hit group, and we will go to this new group, we'll tap on it, and we will choose rename. Let's rename it as S. Now, when this whole group is selected, we will go again to our arrow icon, and now we can just go and make it smaller and find a different placement for this element. For example, let's just put it right here on our top plaft if you want, you can go to this green node, you can hold your apple pencil there, make a movement to the side, it a rotation, and you can just rotate your element. Find the position that you like. Make sure that you have enough space for other elements, and when you have it as you like it, let's just go and deselect everything by heating our error key one more time. When we are done with this, let's again go and zoom in our canvas and we will go again to our layers. We will go to our layer number one and we will add some shadows and highlights. Firstly, let's just go and create one more layer and we will need to clean this layer to a previous one, so everything that we are creating right here will be appearing only on the previous layer. We will need to tap on this layer and we will need to choose clipping mask. When we did it, we will go to the icon and we will change the blending mode to multiply. As for the opacity, we will go with something like 30% for now, and if it's too bright or it's not enough for our shadow, we'll get back to this option later on and we will adjust it. Now you can decide whether you want to go to your color palettes and change the color. For example, you can choose between yellow, orange, peach, rainbow orange or any color that you like. Let's select one of the colors. For example, let's just go with the same color that we use for the main elements. It was our yellow color. We will go and make the size of the brush a little bit bigger, and we will go to one of the sides. For example, to the left one, and we will create a curve going down in that way. You can hold the curve and the ends and you can adjust the placement of this element, you can adjust the curvature. When you are holding it, you can go over the top to the editing mode and you have these nodes here. You can go to the notes, you can hold your apple pencil at the node and you can adjust the curvature of your elements. You can go to some other nodes and you can adjust it even more. Find the placement for this element that you like and when you're satisfied, let just tap on the screen to get away from this mode. Now when we have this first curve, let's just increticize of our brush and we will go manually ent color the rest of the area. Now, when we have something like that, let's again go and make the size of our brush a little bit smaller, and then we will go again to our color palettes and change our color to orange or peach or any other color that is different from the shadow color. For example, let's just go with orange and we will go and add some additional elements here. Firstly, let's just go and add a few lines going just in that way. You can just go through the whole shape, you can vary the size of your brush, make it bigger or smaller. Let's just go and add a few elements going in that way. Don't go more closer to your meddle part because here we are going to be aging facial features and that might be a little bit problematic. Let's just go and add a few more on these elements. Also, if you want to go to the meddle part. We can just go and add a few dots like that, that will represent some of the frecals. So when we have the result like that, let's just go again to our layers and we'll tap on the plus icon to create a new layer. Again, we will just go to it, we will tap on it, and we will choose clipping mask. Now we are going to be creating the highlights. Let's just go to our icon and change the blending mode to overly. For the opacity, for now, we can go with maximum or straightaway, we can just go and set it at something like 50%. If it's too much or not enough, we will change it later on. Now, when we are done with adjusting this layer, let's just go back to our color palettes and select the white color. We will go and increase the size of our brush, and we will go to the opposite side from our shadow, and we will create a little highlight there. Let's just go and start by creating a line going like that. Again, you can hold your line in the end, you can go to this option on the top to the editing mode and adjust the curvature from here. And when you are done adjusting this shape, let's just go tap on the screen and maybe if you want, we can just go and add a few more highlights. For example, we can go and adjust our size of the brush, make it smaller or bigger and add a few dots or maybe some highlights in the shape of the sparkles. Let's just go and spend some time here and add a few sparkles like that. Now, let's just take a look at everything from the distance and decide whether we like the amount of opacity on our highlight or if it's too much. If it's too much, we are going back to our layers, we are going to the layer where we have our highlight. We will tap on the icon, and we will go to the slider opacity and we will make it at a very low value. So when you found the apacity that works for you, let's just tap on our layer with the highlights and let's create one more layer above. If you want, you can go and rename your layers in accordance with what you have on this layer. But for now, it can be just like that. When we have this new layer, we will go and start creating artificial features. Let's first go to our color palettes and we will select this brown color. When we did it, we will go and increase the size of our brush, and we will just go and put two dots for our eyes. Let's firstly go over one of our sides and we will put the first dot. If this eye is too small, we can just go back and try it out on more time with the bigger size of the brush. Just put the dot, and when you have it, we'll go to the opposite side and we will try to put it on the same level and try to put it on the same distance from the center. Let's just go and put the second eye. When we have it in that way, we will again go and decrease the size of our brush. And for example, you can see, I have this little mark down onto the slider with the size of the brush. You can do too. When you found the size that you like, you can just find it. You can just tap on this little markdown that you have right now onto your canvlas, the slider where you have your size. You can just tap on it and you will have this little window. When you have the size that you like, you can just tap on plus, and you will have this little markdown onto your little slider. You can just go and adjust the size of your brush and then very easily go to this little markdown. And get back to the size that you were using before. When you found the size that you like when you decrease the size of your brush, let's just go right between the eyes, and let's create a little smiley mouth like that. You can hold your line in the end, you can go and adjust it for your editing mode. It's all up to you. Find the placement that you prefer, and when you're done, let's just get away from our editing mode. Now, when we're done with this, let's just go to the eye and let's just add some highlights there. We will just go to our color palettes and we will select the white color. Let's just go and in criticize a brush and we'll go over one of the sides. For example, let's just go to the same side where we have our main highlights, and let's just go more toward the top. We will just go and put the dots like that and we will do the same on the opposite side. Again, try to put your highlights on the same level. If it's not happening from the first try, try it out one more time. When you're satisfied with these highlights, if you want, you can go and decreticize of your brush and put a few more highlights. If you don't want to, you can keep it as it is. When we are done with it, we will go and add the little cheeks. Firstly, let's just go to our color palettes and we will select the color with the name pitch. Let's go again to our slider with the size of the brush. Let's make it bigger and we will go underneath our eyes, and we will put dots for our cheeks. Again, trying to put them on the same line. If you need to, you can zoom out your canvas and take a look at it from the distance. When you have the circles for your cheeks, let's just get back to our color palettes and we will select this red color. We will go and do criticize of our brush one more time, and we will go inside our cheeks and we will add little lines like that. We will do it on both cheeks. When you did it, we are done with Sun, but let's just go and put one more element behind our sun. What we need to do is to go to our layers and we will go to this layer that we have on the bottom. From it, we will create one more layer, and then we will get to this layer that we have on the bottom, our layer with our outline, we will hold it, and we will drag it up above this new layer that we have just created. Now, we are going to this layer number eight that we are going to be vision for this background element, and then we will go again to our color palette and select the background details color. With this new color, we will just go behind our sun and we'll create some peculiar shape. Make sure that your sap is closed and smooth. If you need to adjust it manually, let go and adjust it. When you have the closed outline, let just drag and drop the color inside, if you want to adjust the sheap, you can go to the okey and adjust it from here. When you're satisfied with the result, let's deselect everything with our key, and then let's just go alone this little element, and let's add a few more details. For example, let's just go and put a few dots like that. You can vary their size, you can vary the amount. It's all up to you. Just creating the additional elements. Now, when you did it, we are done with our first illustration. Let's move on to our next part where we will create our first clouds. 3. Starry Cloud: Let's begin this fight firstly by going to our layers. We will go to our group with the sun and we will toggle this little V icon. Let's just tap on it and we will collapse our group. When we did it, we have everything needs into our layers panel. Let's just tap on the plus icon to create a new layer. When we did it, let's just get back to our color palettes and select the white color. When we have the color that we need, let just go to this area on the right from our sun. Let's start by creating a few elements that we will turn into the little cloud. Let's just go and start creating the shapes that we go in that way. We are creating the petals, we are varying their size, and we are varying the amount. If you want, you can make it parallel on both sides. It's all up to you. When we have the shape like that, let just connect it at the bottom, and when we have the result like that when we don't have any gaps into our outline, let just go and drag and drop the color inside. Now, if you want to adjust your shape in any way, you're welcome to do it either manually or by going to the key and adjusting it from here. For example, let's just make it just a little bit smaller. Then if you want to adjust it even more, we can go to the panel on the bottom and we can use the option work. Now you can see we have the bounding box, but also we have some intersections with the lines inside the box. We can just go to any place right here and we can just toggle it. We can just go to the site, we can go any direction that we would like, and we can just create the shape that we would like. You can just go and play round with this little too and find what works for you. Then just spend some time here and create the sheep that we will like. When we have something like that, when we like the shape, let just tap on our key and we will deselect everything. Now, when we have these little elements, let's just go again to our layers and we will create one more layer on top. We will clean this layer to a previous one, selt just tap on it, and let's select clipping mask from the least. Also, we will just go to our icon, and we will change the blending mode to multiply. For now, let's just go with something around 50%. As we have two layers for this elements, let's select them both. Let's just go and tap on group. We'll go to this new group, we tap on it and we will choose name. Let's rename it as clout. Now, when we did it, we will get back to this layer number ten that we clip to our main shape for the cloud, and then we will get back to our color palette, and again, we will select this yellow color. When we did it, we will go and decrease the size of our brush a little bit smaller to something around 3% or maybe 2%, and we will go and make a little divisions with the shadows on our sheep. Let's go to these little intersections and we will start by going to them and creating the elements like that. We are creating shadows and we are also creating some divisions. When we have something like that, we can grab our eraser and make these lines more clean. Let's just go and create something in that way. When you have the first element like that, let's just go to some of other elements and do the same thing here. Let's go underneath this and we will create another line going down in that way. One more time we are grabbing our eraser and making this line more nice. When we have something in that way, let's just go to the opposite side and we will create just one division like that. Let's just go to this big element and let's create the little line going in that way. If you want to adjust it, again, go and adjust it. Now, when we have something like that, let's again get back to our brush, and we will go to the bottom and we will create a bigger shadow here too. We will just go along the bottom part and just create a curve going down in that way. If you want to adjust it in any other way, you are welcome to go and do that. When we have something like that, if you want to add more details, you're welcome to go and do that. But also, just go and criticize our brush a little bit smaller and we will go and add the details, similar to what we have right here on our s. So let me just go and add a few lines like that, just go along the sides along the lines along the edges and adding these little elements. Also, we can just go and add a few more additional elements. For example, we can just go to these little elements on the right, and we can continue creating a little curve going in that way. We are again creating some peels and also we can just go to other side and create a few more on these elements. Again, try not to go closer to the center because here we are going to be creating our facial features. So now spend some time here and add a few more dots, a little lines, a little details. And when you are done, let's just go more toward the center, and we will again add some little freckles here. So again, go in there and adding a few dots like that. When we are done, let's get back to our layers firstly and then we'll create one more layer above. Now we are going to be creating our facial features. So let's get back to our color palettes and select this brown color. We will go and increase the size of our brush, we will make a big eye firstly. We will go over one of the sides and we'll put our first dot. When we have this first dot, let's just go and decrease the size of our brush. Try to make it similar to the line that you have right here, so you are consistent with your official features. When you have the size that you like, let's just go to the opposite side from this eye, and we will create a line going in that way. Hold it at the end. If you need to adjust it, go over the top to the editing mode and adjust it from here. Also in the editin mode, you can adjust the placement the same way as we do it into our key. We can just go hold our Apple pencil and find the placement by moving it. When we have the position that we like, let's just go away from our editon mode, we will tap on the screen, and we will go and work more onto this eye on our right. Let's just go and add some eyelashes. We will just go there to one on the sides and we will create two lines going in that way. When we have it, let's just go right between the eyes and let's create the similar smile to what we have on our sun. Hold it in the end if you need to go to the editing mode and adjust the placement or anything that you want to adjust here. If you want to change the rotation of your elements, you can go right between the nodes, into the editing mode, hold your apple pencil there and make a circular movement. When you found the placement on the elements and everything that you wanted to found here into your editing mode, when you're satisfied with it, let's just tap on the screen to get away from our editing mode. Now, let's just go over the left side from our smile, and let's add a little time here. We'll just go there and create half of the ellipse like that. Again, you can hold it at the end and you can edit it from the editing mode. When you like this element, let's just get away from our editing mode, and let just go to the soap right in the middle and we will add a little line like that. When we are done with this, let go and add our little cheeks. We are going to our color palettes, and again, we will select our peach color. Let's make the size of the brush a little bit bigger and let us go underneath our eyes and let just put our little dots for the cheeks. Again, take a look at your illustration from the distance if it's easier for you to put these dots and when you are done with them, let's just go and add our little lines. Again, we are going to our color palettes and selecting this red color. We are going and decreasing the size of our brush, and then we'll go inside our cheeks and we will put these little lines. When we are done, we will need to recolor our tongue. Let's again go to our color palette and select either rainbow red or any other color that you would prefer. When you have it, we will just drag and drop it to this area. Then we also will need to go to our eye and put our little highlight here. As we already have our white color onto our screen, we can pick it from here. Let's just go to this white color and to hold one of our fingers on the screen. You will see we invoked our eye drop to. If you move your finger, you will see that the color on the top is changing. We will just need to go and find the white color. When the white color is on top of the tool, we will just raise up our little finger. When we have it, we will just go to one of the sides and we will put our little highlights to the eye. When you did it, we are done with our first cloud, but let's just go and add some additional elements to the background. One more time, we are going back to our layers, we will go to this layer where we have our shadow, and from here we will create one more layer. Now, we will go to these two layers that we have on the bottom. We will select them both, and we will drag them higher than the new layer is. When we did it, we will go back to this new layer, and then we will go against our color palette and we will select the background details color. When we did it, let's just go behind our little clouds and let's create some particular sheap or if you want, you can just hold your apple pencil and create a circle or an ellipse. If you want to adjust the placement of this element, you know what you need to do. You just need to go under your editing mode and adjust it from here. When you are satisfied with the position of this element and with everything here, let's just tap on the screen to get away from our edited modes and let just drag and drum the color inside. Then again, we will go and increase the size of our brush and we will go along this new shape, and we will add a few more details. Okay. Also, for this cloud, let's just go and add a few stars. You can go to the project dresser sap and you can download the brush that we are going to be using right now. But firstly, let just go to our layers and let's create one more layer about this new layer with the specular shape on the background. Now when we did it, we will go and select this brush. Again, you can find it in the project reser sap. When you selected this brush, let's just get back to our color palettes and let's select this orange color. Let's increase the size of our brush, and we will go over one of the sides. For example, to the top right, and we will put a few dots for these little elements. Let's just go and maybe play around with the size of this brush, and let's add a few little stars. When you're satisfied with this result, let's move on to our next part, we will create another cloud. 4. Rainbow Cloud: Let's begin this fight firstly by going to our brush library, and we will get back to our calligraphy folder and choose our monoline brush. When we did it, we are going to the layers and we will collapse our group with the first cloud and we'll create one more layer so we can create a new cloud. Then when we have this new layer, we are going back to our color palette, and again, we are selecting our white color. Let's just go underneath our sun and let's create a little bit different shape for this new cloud. Again, we will start by creating some petals like that, but let's just make it a little bit more peculiar, maybe. When you have the general shape, let just drag and drop the color inside, let just take a look at it from the distance and adjust it a little bit more. Let me just go and make this little part a little bit more protruding, and also we will work on the bottom parts so it is more like a curve. Spend some time here, try to make it very nice and very cute and that you would like. And when you have the shape of the cloud that you like, let's just go to our R key one more time, and firstly, we will start with uniform method. We will make it a little bit smaller or bigger to your liking and we will move it a little bit up, so we will have some space around these elements. If you want to rotate it, you're welcome to go and do that. If you want to adjust it even more, go under work and adjust it from here. Let's just spend some time here and let's adjust our cloud to our liking. Also, for these elements, we will need to have some little space on our left. Let's again go on the uniform and let's move it a little bit more toward the right. When we have it in that way, let's just go and deselect everything, and let's continue working onto our cloud. Again, firstly, we are going back to our list and we'll create one more layer on top. We will clip it to our previous layer. We will go to our icon and change the blending mode to multiply. One more time, going on with something like 40 or 50% for this opacity, and we will select both of these layers and we will put them in the group. Let's rename this group as rainbow clout. Now, let's get back to this layer 16 that we clipped to our first layer, and then we'll go again to our color palettes and select our yellow color. We will do the same thing as we did right here. We will go to some of the areas and we will put this little dividing part. Again, let's just spend some time here and let's create the shadows or these little dividing parts. Now, when we are done with this little dividers, let's just go and put the shadow on the bottom. Again, let's just go over the bottom part on the left, and we will start by creating a shadow going in that way. If you want to work on the shape on the shadow, you are welcome to go and do that. Then we will go again and de create the size of brash and we will go and put these additional elements. Firstly, let's just go with these elements like that. We will just go and add a few dots or little lines to add some texture to it. Again, if you want, you can go right into the middle part of your cloud and put a few dots here so they will be some kind of freckles. When we are done with it, let's just go and add a few more elements like this. When we are done with adding these details, let's again go to our layers. We'll tap on the plus icon, and we will start adding facial features. Firstly, we are going again to our color palettes and selecting our brown color. Let's increase the size of eye brush and we'll put the similar dots to what we had on our sun. Again, going to one of the sides firstly, creating the first eye, and then going into the same line on the opposite side and putting the second dot. When we did it, let's de criticize of brush to the same size that we had right here and right here on our little clouds. Let's just go right between the eyes and let's create a very kissy mouth. We will just create a digit three. When we have it, we will go a bath, our ice and we will put little elements for our eyebrows. For example, let's just go with simple curves. Hold it at the end, if you need to, you can go and play around with these elements. You can make them very curvy, or if you want to play around with the sheep, you are welcome to go and do that. You can vary their size and you can vary their placement. When you are done with these elements, let's just go and add little highlights firstly. One more time, we'll pick the color from our canvas, we'll invoke our eye drop a two by holding one of our fingers. When the color on top is white, let's just raise up our little finger. When we did it, let's just go to the eyes and let's create peculiar shapes for our highlights. For example, let's just go to the opposite sides from the highlights that we had before, and we will just go and create little hearts here. Create a shape of the heart, and when you have it in one eye, let's just go to the opposite one and do the same thing here. When we have the yes, when we have them fully done with all the highlights. Let's just go again to our color palettes. Again, we will select the peach color. We will increase the size of our brush. We will go underneath the eye. We will put our little dots for the cheeks. When we have the dots for the cheeks, again, we're going back to our color palettes and who will select the red color? Let's decrease the size of our brush. Let's go inside our cheeks and let's add our little lines. Now, when we are done with our clouds, let's just go again to our layers, we will go to this layer where we have our shadow. We will tap on the plus icon, we will select these two layers and we will drag them higher than our new layer. Now we are going back to this new layer. We are going back to our color palette and selecting our background details color. Now, let go and add this additional element the same way as before, or you can just play around with the shape for this element. Make sure that the line is closed, dragging drop the color inside, and let us go in criticize of abrah and let go and add a few more details. When you're satisfied with everything here, let's just go and the rainbow. Firstly, we are going into our layers and we will create one more layer above this layer with the additional elements. Let's just stop on the plus icon. When we did it, let just get back to our color palette and we will start with this rainbow red color. When we pick this color, let just go and increase the size of our brush just a little beads, and we will go to the left side and we will create a circle here. Let just hold it at the end, and then we will go under our lives and we will select circle right here. Let's position it nicely onto your canvas. You can take a look at your illustration from the Gistans. You can just find the placement that you would like, and when you found it, let's just go and tap on the screen. When we have this element done, let's go to our layers, and we will make a copy of this elements. One more time, let's just wind this layer from right to left and we will choose duplicates. Now, we will go to this layer. We will go to our color palettes and we will select our next color, our rainbow orange color. Let's just drag it to this element, and when you have it in that way, you can go to your arrow key and make this element a little bit smaller and position it underneath our first element. Firstly, let's just make it smaller, and then we will go and position it to the bottom. Okay. Connect these elements nicely. When you are done, let's deselect everything and we will do it one more time. Again, we are going into our layers. We are making a copy of this layer, choosing duplicate, going back to our color palettes and selecting the next color, rainbow yellow. Dragging it to this area, go into our air icon, making these elements smaller and position it nicely underneath our previous color. Okay. When you did it, let's just tap on our arrow key to deselect everything, and we are doing it one more time. Going back to our layers, making a copy all this new layer, going back to our color palettes, select dragging the color to this area, going into our arrow icon, making it smaller and position it underneath our first elements. When you did it one more time, tapping, going back to our layers, making a copy, go into our color palette, selecting rainbow blue, going into this area, recoloring it, and then we will go again to our arrow icon and making it smaller, position it underneath our green color. Okay. When you did it, doing it one more time. Going back to our lease, making a coope, going into our color palette, selecting rainbow purple, and adding the color to this area. Then again, go into our air icon, making it smaller and position it underneath our blue color. Now, let's deselect everything by hitting our key, and if you want to work more onto your rainbow. For example, you can make it smaller or bigger. We can just go to our layers and we can select all of these layers that belong to our rainbow and put them in the group. We will go again to this group. We will select it, we will go to our arrow icon, and we can position it differently, find different placements, find maybe different size, find what works for you. When you're satisfied with these elements, let's deselect everything, and let's continue by going to our next part, where we'll create our last illustration. 5. Sad Cloud: Let's begin this part firstly by going to our layers and we will go to this rainbow cloud group, we will collapse it. When it is selected, let's just make this whole thing a little bit smaller. Let's go to our ero icon and let's just make it smaller and maybe position it differently. If you want to rotate it, go and rotate it, find a better placement for it and make some space for our last illustration. When we did it, let's deselect everything, let's one more time, go to our layers, and let's create one more layer above our rainbow clouds. When we have it, one more time, we are going to our color palettes, and we are selecting the white color. Let's go and create another shape for the clouds and let's again create something different to what we have already on our screen. Again, starting by creating some petals and just creating a pecular shape for our clouds. Close the shape and then drag and drop the color inside, and if you need to work more on your little illustration here. When you are done with the overall shape, let's just go again to our arrow. Let's make it a little bit smaller. Let's rotate it a little bit too, and let go and if you want to, we will go under work and play with the whole shape if we want to. Let's again go under our uniform method and let's just drag it a little bit higher so we will have a bit of space on the bottom. Again, find the placement that you like when you're satisfied with the position of these elements. Let's deselect everything by hitting our arrow key. One more time, going back to our layers and creating one more layer above. Let's clip it to our previous layer, and let's go to our icon and change the bland in mode to multiply. Go into something like 40 or 50% for our opacity, and then going again to our color palettes and selecting our yellow color. Let's decrease the size of a brush and let's just go and add additional elements here. So again, starting by going to this little dance, and let's just go and create little shapes like that. Work with your brush and work with your eraser to create nice shapes. If you want to go and add more elements, you are welcome to go and do that. Firstly, let's just go and create two of these little intersections, and then we will go to this little element right here on the right, and we will just go and create a particular shape like that. Also, we will just go to some other elements, some other sides, and we will just go and add a few more details. Let's just start by putting a few dots and a few lines, and then we will go on the bottom and create this big shadow here. Again, just going through the whole shape or more to one of the sides and just creating this big shadow. The additional elements, if you want to work more on the shape, when you are done, let's just go to the middle part and let's add our little freckles here. Take a look at your cloud from the distance and if you like it, let go again to our layers, and let's create one more layer above. Let's select all three of these layers and let's put them in the group. Let's rename this group as set clout. Now, when we are done, let's just get back to our new layer and we will go again to our color palettes and select our brown color. Let's go and put these two dots for our eyes, the same way as we had it on our sun and on our previous cloud. When we have the eyes, let's decrese the size of our brush and we will go right between the eyes, and we'll create a very set mouth. Adjust the placement, adjust the size, adjust the curvature if you want to find what works for you. When you have it, let's just go away from our editing mode and let's just go and work more onto the details. Firstly, we will just pick the color from this white element. We will go to the ice and we will add our very set highlights. Let's just go and put the big dots like that firstly. Then we will decreticize of our brush and we will go and put a few more dots like that. When we have it in that way on the same layer, let just go back to our color palette, select our peach color, and put the dots for our cheeks. This time, let just go a little bit more toward the sides from our eyes. Take a look at it from the distance, and when you are happy with your cheeks, let's just get back to our color palettes like the red color, and let's just go and put these lines inside. When we are done with the cheeks, let's just go to our arrow key, and we will make facial features a little bit smaller, so we'll just go to one of the corners and we will just drag it down or up depending on the corner. Let's position it somewhere in the middle of our clouds, and then we will go and deselect everything by hitting our arrow key one more time. Now, let's go back to our layers, we'll go to this layer where we have our shadows and from here, we'll create one more layer. We will go again to our color palette, and we will select this background details color. With this color, we will go underneath the eye and we will go and create the shapes like that. We are creating a crime cloud. When you have it on one eye, let's just do the same on the opposite side. If you want to create some little drops, you are welcome to go and do that. Okay. Now, when we have our facial features, let's just work more on the bottom part of this element. Let's just go to our layers and let's just go underneath our layer with our cloud. We just need to go firstly to our layer where we have our shadows, create one more layer here and then select these two layers and drag them higher than this new layer. When we did it, we will go back to our color palettes and we will select our yellow color. With this color, we will go more toward the middle part of our cloud underneath it, and we will start by creating a little lighting here. Before that, make sure you are doing it on the new layer, which is our layer 32. So we are starting by creating the line going down in that way. Then we are creating a little step and going down with the line like that. When you have it, we will need to add some thickness to it. Let's just go to the right, we will go up with the line like that, and then we will continue by creating a little step again. When you have the result like that, if you want to make something different, if you want to find a different placement, you are welcome to go and do that. Let's just make it just a little bit bigger. Let's position it more toward the center and when you have it, let's just go and deselect everything by hitting our arrow key. Now, we will go over the top of this element and we will close the shape and then we'll drag and drop the color inside. If you need to work on the shape, maybe make some lines more straight or turn on the corners into the very smooth lines, you are welcome to go and do that. Let's just work on the shape and make it more clean. When you're satisfied with the element, let's go to our layers, and we will create one more layer above. We will clean this layer to our previous one and we will add some details here. Firstly, we are going back to our color palette and you can decide whether you want to use the same yellow color or an orange one. Firstly, we will go and create the shadow underneath our little cloud. Just go in there and repeating the shape. Now, you don't see it, but we will need to go to our layers and we will go to our icon and change the blending mode to multiply. When you have it, let's just decide on the amount of opacity. For this element, let's just go around 60%. Now, if you have some gap on the top, you can go and manually recolor it, and then let go and add a few more details. Firstly, let just go again to our color palettes and select this brown color. We will decret the size of our brush, and we will go right underneath our little clouds and we will just make a little divider with this color. Also with the same color, we can just go and add a few lines of our details. When we have something like that, let's just go again to our layers and let's create one more layer. Onto this layer, we will go back to our color palettes and we will go and select this background details color. We will get back to our layers and we will go to the icon and change the blending mode to multiply. For now, let's just keep it at maximum. We will go and increase the size of our brush to something similar to the amount of the size that we have on facial features. Let's just go and create a few lines going in that way. Try to make them parallel to one another and when you have the lines like that, n just grip ser and n just add some gaps to them. When you have the result like that, let's just go again to our layers, and let's create one more layer for these details at the background. We will go and create the layer from here from this layer where we have our rain, so let just tap on the plus icon. We will select all these three layers that we have underneath and we will drag them up. We already using our background details color. So let just go and create this additional shape on the bottom. Again, make sure you are doing it on a new layer, which is our layer 35. Close the shape and drag and drop the color. If you need to adjust the placement or the size of it, go to your arrow key and adjust it from here. Then let's increase the size of a brush and let's add a few more additional elements. Okay. And when you are done, let's go again to our layers. We will collapse our group with the set cloud. When it is selected, we will go again to our key, and we will find a better placement for it, maybe a better size for it. If you want to rotate it, you are welcome to go for it too. So find a placement for the elements. When you are satisfied, take a look at your illustration from the distance, make sure that you like everything here, and when you do, you are done with your class. Thank you for watching this class, liver review if you like it and continua subscribing for more CI vs in the future. Looking forward to seeing your projects.