Kawaii Doodles: Simple Fairy Tale Illustrations | Cute Drawing in Procreate

1. Introduction : Hello everyone, I am uni, and ease of this class will make a few cute fairy tale z that this class doesn't require any prior experience or offensive. So we'll start from scratch and we'll be using simple techniques throughout the process. Everything you'll see will be happening in Procreate. However, if you have other software or wants to try traditional materials, you are welcome to join if you're ready to start, Let's jump right into it. 2. Sketching the Castle: Let's start our class by deciding what kind of Canvas we are gonna be using. You can see it is a very simple square canvas because both the width and pixel height are 2048-bit sets. If you would like to use any other dimensions for your canvas, just go for it. As for a DPI, we are using 300 and S for the color profile. It is set as SRGB with this low number. When it's all done, let's hit Done and it will be redirected to our new canvas. And now we need to decide what kind of colors where I'm gonna be using throughout the whole class. You can go to the project and restaurants app. You can download the color palette and you can follow along and when needed it let just go straight to our color palettes and we will check out what we have here. Here we have two options of how we can use this colors. They come back to you and the cards will be using cars because they have all the colors names and they are ready for you to be its nth while we're still here under our color palette, Let's select our first color. And as I started by creating a little sketch, Let's select the color with the name sketch. We will tap on it and we will select it. When we did it, we will need to go and select the brush for our sketching parts. So let's just go to this icon with a brush. We will go inside the brush library. We will go to the sketching folder and we will select procreate pencil if you would like to use any other brush for this question part, you are welcome to do it. Now when we have our brush and when we have our color, we can go and adjust the size of the brush if you want to, if you don't want to, let just go and zoom in our Canvas to some part on its own. And we will start by creating a tower, which later on we will turn into a little castle. So let's just zoom in our Canvas. We will go to the top bar it, and we will start very easily by doodling our little rectangle. That will be our needs it and that will be vertical. Don't worry if it's not happening from the first try. Just go and create something like that. You don't need to be very precise, just with simple lines, create a shape like that. Now we are just doodling and we don't need to pay too much attention to our lines. Later on, we will turn them into very straight lines and it'll be nice. Now when we have the first shape, we will need to move on over our right side and we will need to repeat it there. So just go in there, stabbing a little bit from our first shape and repeating it over r, right set. Try to make it similar to the shape that you have over your left side. When you're done with these two shapes, we will go between them and we will create a wall here. So firstly, let us go and find the approximate center of these two shapes. You can just go and mark it down. And when you have it, we will go and create a horizontal line. Let's just go and do that. You can hold your line and the end. If you want to snap to a perfectly straight line, when you have it, we will need to go or our bottom part and we will need to create another horizontal line. Here. We will step a little bit from the bottom line that we have on to our little tower, and we will go and create another horizontal line. So something like that. When you had this very street wall, we will go over the top part and we will add some beautification here. So firstly, let us go over our left side. We will stop a little bit from this side from art sour and we will create a little rectangle like that. So we are making some cuts into our wall. When you have it on the left side. Let's move on over our right side and let's try to repeat it here. We will need to keep the same distance from our tower, and we will need to repeat the size of this little rectangle that we have created when you have this second cartilages go in the middle part and we will create another cut here. So again, just repeating the shape, just trying to make these distance between our little cats similar on both sides. If you want, you can grab the eraser tool and you can erase this part on the top so you don't need to repeat them later on and you won't be confused. So lets just grab our areas or two and let's erase this little parts. Now when we are done, alleges go and grab our brush one more time, and we will go and find an approximate center of the whole shape. So we will go and create the vertical line going from top to the bottom, which will be somewhere in the middle of the whole ship. So let's just go above our little sheep and we will create this vertical line going from top to the bottom hole, this line and the end, adjust the angle. Tried to make it similar to the angle that you have gone through your shape. If you need to move this line, if you see that it's not in the center, we will go over the top to Edit Shape. You can see that here we have two nodes, one on the top, one on the bottom. We can go and adjust the position of line. We can adjust the angle, we can move it, we can do whatever we want here. So we will go and try to put it right in the middle. To do so, we will need to go to our Canvas. We will just hold our Apple pencil on some space. We will just move it until we see that it is in the center. When you are done, ledgers tap onto our screen with one of our fingers or with our Apple Pencil and we will get away from this mode. Now when we have this approximate center line going from top to the bottom, we will go to this wool that we have in the middle of two towers, and we will create a little door here. So let's just zoom in our Canvas and we will go to our left side from this line that we have in the middle. And we will start very easily by creating a curve like that. You can play around with its size. You can hold it at the end to snap it to a battery shape. And when you have it on the one side, we will move on to the opposite side and we will try to repeat it here. Again, just go in there and creating a curve. Now when you have the shape like that, we will go inside of it and we will add a handle here. So go to one of the sides and creates a little shape like that. You can play around with the shape on the handout. It's all up to you. And when you are done, allege us go to the door and we will add some texture on the wall. Here. We will go and create some wobbly lines like that, started from something like that, and then go and create some pattern here. When you are done, ledgers go and add some windows. Firstly, going over our left side to this wall and we will create a little rectangle like that. Just go there and very easily create the sheep. You can hold your Apple pencil at the ends of the line, or just very easily with a schedule and create a little window when you have it on one side. Let's move on to the opposite side and less the same thing here, trying to keep the same distance from the center and the same distance from arts hour. We will try to keep the same size on the window and we will create it here. When you have this second window, we will go and we will work on to our ITS hours. Let's firstly go over our left side and we will start by creating some windows again. So again, going over our left side, we will go a little bit above our line that we have on the bottom. And we will start by creating a line like that, which will be just a straight horizontal line. As always, you can play with the distance from your boards and parts and from the sides. It's all up to you. When you hand this slide, we will go and create the shade, the scene that we have for our door. Let's go and try to do that. As always, you can play with this size. You can play with the curvature of this line. It's all up to you when you have this window on to our left, our legis move on to the right one, and let's do the same thing here. Try to put it on the same line and try to keep the distance from the bottom and from the sets. Now when you have these two windows on the bottom, Let's move on over R2 part and let's create one more window here. Again, starting from our left side and creating similar window here. This time let's make it a little bit narrower. So again, starting by creating a line like that, which is horizontal line, and then it will go over the top and we will create this rounded shape when you have its own the left tower. Let's move on to the right one and less. The same thing here, trying to put it on the same line and keeping the distance from the top and from the sites. When you are done with the windows, we will go over the top part and we will add some roof. As always, we are starting from our left side. We will go over the top of a tower and we will start by creating a little triangle here. Ledger step a little bit from the sides and we will make it a little bit bigger than the shape of our rectangle. Let's just go and create our sheep. When you have these sheep on the triangle, ledgers go to the corners and instead of various treatments, we will make the curves. So I just soften in our triangle. When you have something like that led, just grab our eraser tool and we will erase everything that we don't meet. If you want to adjust some lines, maybe make them more straight. You can go and grab them, brush, grab the eraser tool and adjust them to your liking. Or if you don't want to do it right here onto the stage later on, we will fix it when we're are going to be aiding our colors. So don't worry if you don't want to change anything here. Now when we are done with softening up our little corners, Let's just go over the top part of our roof. Do this little shape that we have here. And we will start by creating a little flag here. Let's just go and start by creating a line going up like that. You can vary its size. It's all up to you. If you want, you can make it thicker or thinner. It's up to you again. And when you have it, we will go over one on the sides and we will create another triangle here. It will look like that when you have it on one side. Let's move on to our right sour. And we will start by creating these triangle for the roof. Again, just go in and creating the sheep firstly, try to make it similar to the one that you have over the left side. When you have the basic shape ledgers go to our corners and we will soften it up instead of the street corners, we will create the curves. When you are done with this task ledgers grab our eraser tool and we will erase all the lines that we don't need. If you want to work more once a year, lines change them, maybe clean them up, maybe make them even straighter than they are. You can go and do that if you don't want to lead us go or that's open, we will add our flag here. So again, just give it to the top and creating the line. Firstly, when you have the line ledgers go and create the flag looking at the same direction than the first one. Now we are done with the base, and that means that we are ready to add some beautification. Firstly, let us go to our roofs and we will add some wobbly lines, some curves to create some shingle. So first the ledgers go over our left side and let's do something like that. You can play around with this size. You can play around with where you want to put them with their amounts. It's all up to you. Try not to overdo this part. When you are done with the first tower, Let's move on over our right side and let's do something similar here. You don't need to repeat everything with 100 per cent of similarity here. You can play around and add the different shapes for your shingle. When we are done with that, alleges give it to our towers. A few beautification here. We will add some breaks. We don't want to create the full texture on our little tower is here because it will be quite overwhelming and we don't want to do that. We just need to add some hints so there is some texture here. So let's just go to some blank spaces and we will add a few rectangles that will represent the bricks. Just if you three, maybe four, let just go and create these rectangles. You can make them singular. You can go and maybe find some pattern here. Just go and add a few of them. When you are done with the first tower, Let's just move on over there right side, and let's do something similar here. You don't need to put the same brakes on the same places you can play around and find different placements. And when you are done with the breaks, we will add one more beautification for our castle. Ledgers go above our wall and we will create a little rope here. Onto this rope, we will put some flex, so ledgers give it to our left tower. We will stop a little bit down from our roof and we will go across the whole wall to the next tower and we will create a curve here. You can go and manually create this curve and end the end on the line. You can hold it to create a better line. If you want, you can move it in a different direction. You can play with the angle if you need to adjust it even more. Lead just on hold our Apple pencil and let's go over the top to edit shape. Here you have some notes just as before and you can play with them. So e.g. you can play with the curvature or with a position on the whole shape. Let's just give it to this middle node and let's put it a little bit down. And when you are in Zan link just below this line, and we will add the shapes like that. So basically we are creating the inverted shape of the letter M. When you have the first one, ledgers go along the whole rope and let's add a few more of them. And when you are done with aging this little flags, we are done with our first sketch. In the next part, we will create a little dragons. 3. Sketching the Dragon: Let's start by zooming in our Canvas to some blank space. And we will need to start by creating a guiding line, which will be the curve. Let's just go and create something like that. You can play with its size. You can play with the curvature. When you have something like that, we'll go over the top of our line and we will start by creating the shape of the head. The shape will be analysed and it will be horizontally aligned. Let's just go and create something like that. And as always, you can play around with this size, so you can play with everything here. When you have this first shape, we will go to the bottom and we will create a body. It will be the same ellipse, but this time it will be aligned vertically. Ledgers go and create something like that. When you have it, we will need to connect the shapes and we will need to create a tail select just go firstly over-the-top and we will do a loan of Irish shapes and we will start creating the curve going from top to the bottom. And that will end up with a t. When you have something like that, we will go over our left side and we will connect the shapes here to firstly, ledger start from our body part and we will go and create the curve, go into art sale and forming this tail. When you have something like that, Let's just go over the top and let's connect these shapes here. Just go in there and creating a little foot. When you have some feeling that alleges go and add our legs and the arts. Firstly, go into the legs. Ledgers go to the shape that we have for our body. We will do an inquiry to guides in lines like that. When you have these guiding lines, we will go and turn them into their legs and they will have the shape of the bottom part of the ellipse. Let's just go create the first one and then later on we will create the second one. Try to make them similar size-wise. When you are done with the legs, let just go and create a tiny firstly and then we will add the arms. We will go to these same shape of our body. We will go to the left side and we will create half of the circle or half of the ellipse here. When you have this shape, we will go and we are ready to add the arms. So for the arms firstly, let us go over our left side. We will go a little bit above these sheep of the tummy and we will create similar shape that we have for our leg. You can play with the angle and with the size. When you have the first arm, Let's move on over our right side. We will go to the same line that we have, our first, our own, and we will create similar shape for the arm. Again, try to make it similar size-wise to the first arm. And if you need to adjust some shapes, if you need to erase some elements to make sure that you're doing everything right leg. Just grab our eraser tool and erase all the lines that we don't need. When you are done with this task ledgers go to the tail and we will turn these various trade corner instead a curve. So again, softening up our corner. When you are then lets just grab our eraser tool and let's erase this line that we don't need. Now when we have our body than alleges go and add some beautiful locations for our top part, we will go strictly from r hat and we will need to create some cool go in alone. The whole shape of our body ledgers go firstly, over-the-top birth and we will create the first shape like that. As always, you can play with the size, you can play with the placement, with everything. When you have the first shape, ledgers go all over our place here. We will create a few more of them, just connecting them together and changing the angle a little bit. When you are done with the comb elements, let us go and add a little wink. We will go here onto the same side and we will start by creating a line going up in that way. Just start from the shape on the body and create the line going diagonally up. When you have it, we will go and create a little curve on its soap. And then we will go and loop it around and create a few more loops going down. When you are done with the loops, you can play around with their amounts, with their size, with everything. We will need to go down and we will need to close the shape. If you want to adjust the shape in any way, just go and do that. When you are done with this wing LED, just go and add the facial features. So firstly, we will need to find an approximate center. We have this line that is going through the whole shape, but it's not in the center. So let's just go and create another curve. We will go and try to put it in the middle. When you have it, ledgers go and start by creating the ice. We will go firstly over our left side and we will put a little dot here. You can play with its size. You can play with the distance from the center. It's again up to you when you have the first eye. Let's move on over our right side and let's try to do the same thing here. We will need to put it on the same line and we will need to keep the distance from the center when you have it's ledgers go and work onto our mouth. We will go between the eyes and a little bit down. And we will create firstly, a curve like that. The line and the end, if you want to, if you want to edit it even more, go over the top to Edit Shape and adjust the curvature. E.g. if you don't want to do anything, ledgers go under this line and let's add some things here. Firstly, going over our left side and creating a little triangle here. When you have it on the one side, you know what you need to do. You will need to go over the other side and repeat the same thing here. When we are done with our facial features, ledgers, grab our eraser tool and who will erase all the lines that we don't need. The very last thing that we will add to our Dragon will be a little fleet. So lets just grab our brush. We will go to this side, to the left one, and we will create a little flame here. Firstly, ledgers go somewhere in the middle of our hats. You can just make a little mark down where you want to start from. And we will go over the top and we will create the shape like that. So basically we are creating some loops and we are agents similar shape to the one that we have here on our little weak. When you are done with this shape, you can play around with it in any way. You can just make it straight. You can make it very rounded. Or if you want, you can play a little bit and make it more similar to the flames. So e.g. you can work onto this loops and make them known that rounded, but maybe make them a little bit more flames alike. E.g. you can make them very straight and maybe put them a little bit more toward the opposite side and make these little shapes more like fleets. When you are done, we will go inside of this shape and we will add a little detail here. And these details will be a little heart. So let us go and we will go along the lines that we have right here. We will try to repeat them, but we will turn them into a heart. So firstly, let just repeat these two lines and then we'll go over the top and we will create a heart here. You can play with its size. If you want to add more details, you are welcome to do it. And when you are done, we are done with our second sketch. In the next part, we will add a princess. 4. Sketching the Princess: Let's say I draw in our princess by finding some blank space and creating a vertical line going from top to the bottom, it will represent the approximate center and it will be easier for us to position our sheets on it. So let's just go and create this line going from top to the bottom. At the end, we will hold our Apple Pencil and we will adjust the angle to make this line straight. If we need to adjust it even more, we will go over it. It's up to Edit Shape and we will position it to our liking. When we're done, we will need to go or the top on this slide. And we will start by creating a face. To create the face, we will need an Alice. So let's just go and make it. You can do it manually. Just go in and doodling this shape on the Arabs. But also we can go and created just with one line. So let's just go and try it out without an holding your Apple pencil. Let's create a shape of the ellipse. At the end on the line, we will hold our Apple Pencil and we will see that we snapped are shaped to a better one. We can rotate it by moving our Apple pencil in a circular direction. And we can make it smaller or bigger by moving our Apple pencil from side to side. So find what works for you in the size and the position. And if you need to adjust it even more, Let's hold our Apple pencil and let's go over the top to edit shape. Here we can play with the notes. And if we need to move our shape more to the center, we will hold our Apple pencil on some blank space and we will just move it in accordance with our vision. If we need to rotate this shape from these modes, we will go between the nodes. We will hold our Apple Pencil, add the line, and we will make a circular movements. So find what works for you. If you need to play with the notes, play with them. If you need to rotate it, rotate it. If you need to place it more toward the center, just go and do that. And when you are then we will tap on the screen with one of our fingers or with our Apple Pencil and we will go away from this milk. Now when we have this shape for the face, ledgers go m3 the ears. So we will go to this site. And if it's easier for you, you can just go and find an approximate center by creating a horizontal line going through this sheet. If you don't want to do it, just go and create a little half circle on one of the sites. Let's just start from the left side. We will go to this side and we will create a shape like that. Hold it at the end if you want to, if you need to adjust it, you know what you need to do. You will need to go up to Edit Shape. When you have this first year, we will need to go over our right side and we will need to add the same shape here. Again, if you want, you can go and you can create auxiliary lines to help you to put it on the same place. If you feel brave, just go there and create the ear all by yourself. Try to make it similar to the shape that you have over your left side. If you need to adjust it, go up to Edit Shape. Remember that now we are creating just a sketch. It is a scheme. Later on we will make everything clean and nice. So don't worry if all the shapes are not similar to one another. When you are done with this task, let just go above our head and we will add the hair. So firstly, we will go to this intersection that we have with our line that is going vertically and we, the whole shape of our head. And from this intersection we will go and create the part of the hair. So e.g. let's firstly go over our right side and we will go to this intersection and create a curve like that. You can play with its size. You can play with the curvature. It's all up to you. We will need to create something like that. If it's not happening from the first try, try it out one more time. Play around with the size on this element. If you want to go a little bit further from the ear, or maybe closer to the ear. It's all up to you when you have the curve that you like. Let's just grab our eraser tool and we will erase all the lives that we don't meet. When you have this line on one side, Let's move on to the opposite side and let's try to repeat something similar here. Again, just go into this intersection and creates in a similar line. You can play around with its size. You can play around with the distance from the ear. It's all up to you. We will need just to end up with something similar to the shape that we have over our right sets. And again, if it's not happening from the first try, try it out one more time and find the curve that works for you when you are done and when you have the line that you like, Let's just grab our eraser tool and we will erase all the lines that we don't need. Now when you have two parts, only here, we will go to the bottom part and we will connect them with another curve. So let us go firstly over our left side and let's create the curve going through the whole sheep. You can play around with its size. You can play around whether you want to put it, play around with a curvature. It's all up to you. Hold your land and the ends. If you want to adjust it, go over the top to Edit Shape and play with the curvature if you want it when your hands down, Let's tap on the screen. Let's grab our eraser tool and we will erase everything that we don't meet. Now we have the base on the hair and ledgers go and add some banks. So again, we go into this intersection on the top and we will create similar curves that we have over the top part, but this time they will be inverse. So we argue in and creating the opposite curve. Let's just go over our left side firstly, and let's create the curve here. We will end it right onto our ear. When you have it, we will go to the opposite side and we will do the same thing here. If you want, you can play with the curvature on the line. You can make them not similar to one another on both sides. It's your time to play with the banks here. If you want to cover an ear, you can go and do that. Just find what works for you. And when you aren't done, just grab our eraser tool and we will erase all the lines that we don't need. Now when we have our hair alleges go over the top and we will add the crown. We will go again to this intersection that we have in the middle. We will stop a little bit from it to this side. So e.g. to the left one and we will create a line going up. You can make it straight or you can make it a little bit diagonal. It's all up to you when you have it on one side. Let's go to the opposite one and let's do the same thing here. We will just mirror the slide when you have it, we will go and we will need to connect these lines over the top part. And we will need to create something like that. When you add them, ledgers go and add the facial features. We have this line that is going through the center. So let just go over our left side. Firstly, we will add the I here ledgers go and create a shape like that. You can play with the position over it. You can play with the size. It's all up to you. You can hold your line and the answer is never to a better shape. If you need to adjust it, go up to Edit Shape. When you have the first I let just go and add some eyelashes ledgers go below this little line that we just created and add a few lines like that. When you have the eye on one side, we will need to go to the opposite side and we will need to repeat it here. We will need to put the I on the same line. We will need to keep the distance from the center similar to the one that we have or our left side and we will need to keep the sides. So let's just go and try to do that. Again. We're just go in and creating the half of the circle. Cool, July and the end. If we need to, we will go over this up to Edit Shape. And here we can position our eye or play with a distance and play with the curvature. So find the position and the curvature that works for you. Tap on the screen and ledgers go and add our eyelashes. When you have the eyes, ledgers go underneath them and we will add little cheeks. We will just go there and create the shape of the circle or an ellipse. As always, you can play with the size and the position. And if you want to create the circles, hold your Apple pencil firstly at the end of the line and hold one of your fingers on the screen to snap it to a perfectly round circle. Adjust the size. If you need to adjust it even more, go over it. It's up to Edit Shape To find the position that works for you. And when you had the first cheek on one side, Let's move on to the opposite one. And let's do the same thing here, just given there. And firstly, creating the shape of the circle. Hold your line and the end. Hold one of your fingers on the screen and adjust the size. Go over the top to edit shape to adjust the placement. When you are done, Let's tap on the screen to get away from this mode. And let's just go between the eyes and we will add a little Smiley mouth. We will repeat the same shape that we have for the eyes, but maybe this time we will make it a little bit more curvy and maybe make it smaller. Let's just go and try it out. As always, hold your line and the end, adjust the size, adjust the placement, adjust the curvature if you need to adjust it even more, go over the top to Edit Shape, find what works for you. And now we are done with the face. So let's continue by creating the neck. We will go under the face and we will create a little rectangle. Firstly, it lead you step a little bit from this middle line that we have and we will create a little line like that. You can play around with the thickness on the Mac. It's all up to you. If it's not working, just undo it and try it one more time. When you have the line over one side, Let's move on to the opposite side and let's add another line here. When you earn done with this task, just go and continue by adding their body parts. Firstly, we will start by creating a rectangle. Ledgers go right under the neck that we just created. And we will create a rectangle like that, just with one line the same way as we did with our face. Hold it at the end. And if you need to adjust it even more, we will go over the top to edit shape. If we have the option rectangle here, we can select it. If we don't, we can go to the notes and we can adjust it manually. So now let's just go and play around with our nodes. Let just try to make them straight. And if you want to make it smaller or bigger, it's up to you just go and move the nodes to your liking size-wise, we will need to make these shapes similar to the size of the hats, maybe a little bit smaller or a little bit bigger. When you have it, we will tap on this screen and we will go under it and we will create another rectangle. This time, it will be a little bit bigger. So one more time alleges guilt there and we will create the rectangle just with one line. Hold it at the end, and let's go over it. It's up to Edit Shape. If we have the option rectangle layer, just tap on it. If we don't let just go and manually adjust the shape. When you are done with this rectangle, Let's make sure that our sites are similar to one another. If we need to move this shape, Let's just move it. And when you are done, Let's just tap on the screen and let's continue adjusting our shapes. So now when we have these two rectangles, let just go to the bottom one and we will turn the slides that we have over the sides into the curves. So let's just go over our left side and we will create the curve here like that. Hold it at the end if you want to, when you have it on one side, Let's move on to the opposite side. And let's do the same thing here. When you are done with this part alleges go over the top elements that we will have for our body and we will add noodle arms. So firstly, let us go over our left side. We will go to this intersection on the top and we will create a curve going down. You can play with its size. So you can play with the curvature. It's all up to you when you have it, we will need to add some thickness ledgers, go a little bit under this line that we just created and we will repeat this same curve. You can just repeat the line, or if you want to play around, you can do that here. So e.g. allege us make the top part a little bit smaller than the bottom parts. In the end, we will create a little curve if you want to play around and make me make this shape a little bit smaller, It's all up to you. If you want to make the lines curvier. Again, it's up to you when you had the shape that you like ledgers grab our eraser tool and we will erase all the lines that we don't meet. Now when you have the first arm alleges go and add a little detail here. So we will stop a little bit from the bottom and we will create a line like that. That's 0 part will represent the dress and the bottom part will be just a hint. When we have our arm and the hand on one side, Let's move on to the opposite side, and let's do the same thing here. So again, go into this intersection on the top and firstly creating the curve going down and trying to make it similar to the one that we have over our left sides. Hold it at the ends if you need to. And when you have the first curve, ledgers go and create the bottom one, a jazz the lines. And when you are in Zan ledgers, grab our eraser tool and erase everything that we don't meet. When you are done with this task, ledgers, grab our brush one more time and we will create this dividing line that will show where the dress ends and the hand begins. Now when we have this scheme like that, Let's just go and add more details. So firstly, let us go to this part that we have on its own and we will go right in the middle of it, or a little bit above, or Elizabeth below. And we will add a little heart here. Just go firstly to one side, create the curved like that. And when you have it on one side, you know what you need to do. You will need to go or the next side and you will need to repeat this same line here. Play around with the size, play around with the position of these elements. And when you are done, ledgers go over the bottom part to this skirt. We will go firstly over our corner that we have on the bottom left, and we will create a curve like that. Hold it at the end if you want to. And when you are done with one side, Let's move on to the opposite side and let's repeat the same curve. Again, hold it and the Yan's, when you are done, ledgers go and add the legs. One more time. We are going to the bottom part. We are stepping a little bit from our line that we have in the middle, and we will create two lines going down like that. You can play around with the size. You can play around with the distance from the center. It's all up to you. When you have these lines, let just go and connect them with a horizontal line on the WhatsApp. When you have it, we will go under this line that we have just created. And we will create a little triangle that will represent the shoes. When you have this lag and this little food that you have over the left side. Let's move on to the right side and let's repeat it here again, starting by creating two lines that will represent the lek. We will need to remain the same distance from the center when we have these two lines, Let's just go and connect them with a horizontal line. And when we have the horizontal line, we will go and create a little triangle for the shoot. And now we have this scheme on the princess. Later on when we're going to be aiding the colors, we will adjust it even more and it won't be that rectangular. Now, let us move on to the next part where we add some miscellaneous objects. 5. Sketching Miscellaneous Objects: Before starting with our miscellaneous objects, ledgers go to our Canvas and maybe make our position of the elements and their size. Ellis, it will be different. We will go one-by-one, select our objects and adjust them. To do so, we will need to go to our top-left corner and we will need to select this S ribbon icon. Let's just tap on it. And on the bottom we will see that we have this panel where we need to select freehand methods when we did it lead to start from our little castle, we will need to select this object. So we are going into our canvas and just with our Apple Pencil creating the shape like that, we will need to loop it around and we will need to close this shape. When you have only this object selected, we will need to go to the transform tool, which is our heirarchy on the top-left. So when we have only these shapes selected, we go into this arrow key and we are tapping on it on the bottom we have the similar panel. And here we need to select uniform methods. You can see that we have the bounding box and we can go and adjust this elements. We can adjust the placement, we can adjust the size, everything that we want to adjust here. So firstly, legis move with Ellis, let me down. And to do so, we will need to go to some blank space onto our canvas with our Apple pencil. We want you to hold it there and just move it to the place that we want when you found the placement alleged. Just make this whole object a little bit bigger. To do so, we will need to go to one of the corners to the node that we have here. And we will need to move it up or down depending on the node that you are taking. Lead just go over our top left nodes and we will move it diagonally up. When you found the size that you like, we can go and adjust it even more. So e.g. we can make it a little bit narrower or Elizabeth shrink down, e.g. let's just go and select another option that is called free form. With this option, we will go to the node that we have in a center on the bottom, and we will just drag it a little bit up when you are satisfied with everything here, let just tap onto our S ribbon icon to deselect everything. Or if you want to continue adjusting your shape, Let's just go and adjust them to your liking. Find the position and the size that works for you when you are done, we will tap on the S ribbon icon. When you are done with this object, ledgers go and select another one. So e.g. one more time we are going back to our S ribbon icon and we will select our adrenaline here. Let us go and create the shape with the selection tool, loop it around, select only this object. When you are ready, ledgers go to our arrow key and find the position that we like. Again, ledger start from the uniform methods. If you want to adjust this size, Let's just go to one of the nodes and drag it. If you want to rotate your shape, we will go over the top to this green nodes and we will hold our Apple pencil there and we will rotate it in a circular direction. If he wants to adjust the shape even more, you can try out free form method or any other method that you can find on to this bottom panel. Or if you're satisfied with your sheep ledgers go and deselect everything by hitting R S ribbon icon. And one more time, let's select our last object, which is our princess, the same way as before. Just go into our S ribbon icon free, hence method selecting the objects, lipids around, select only your princess. And when you are done, ledgers go to the arrow key and let's adjust it. E.g. let's start by making it a little bit smaller. Let's just go to the node that we have over our top-right, and we will drag it down. If you want to find a different placement for your own jet, just go and do that. If you want to adjust it even more, go to the free form method and adjust it when you are enzyme, Let's deselect everything by hitting R S ribbon icon. And now we can continue by adding some additional elements. Let's start by going between their roofs of our little castle and we will create a little cloud here. So we are doing there and creating the shape like that. Just create a few loops, loop them around and create a shape of the clubs. Close this shape and when you are done, ledgers go inside it and let's add the facial features. So one more time we are going inside the shape. We are going to one on this side and we will create a little eye here. Firstly, let's create a shape like that. Hold it at the end, a jazz this size. Adjust the placement if you need to, if you need to adjust it even more. Let's go over the top to edit shape when you found the placement and the size, Let's just go over the opposite side and let's add the second. So we will need to put it on the same line. We will need to keep the distance from the center and we will need to keep the same size. Hold the line, go over the top to edit shape to adjust it if you need to. And ledgers go and add a little mouth. We will go right between the eyes and we will create a little Smiley mouth. So we are creating the opposite shape from the shape of the eye. Play with the size, play with the curvature. If union so adjusted your over-the-top to edit shape. When you're done, let just go underneath the eyes and let's add little cheeks. So the same way as we did with our princess, we are doing underneath the eye and we are starting by creating the shape of the circle. July and the nth hold one of your fingers on the screen, a jazz this size. If you need to adjust the placement, go over the top to edit shape. When you have the first cheek, let's move on to the opposite side and let's repeat it there. So again, just starting by creating a circle, hold the line and the end. Hold one of your fingers on this green edge as the size. And if you need to adjust the placement, go over the top to Edit Shape. And now we are done with our little clouds. So let's continue by creating a son. We will go and start by creating the shape of the circle the same way as before. Just go in and create and adjust with one line. Hold it and the hands hold one of your fingers on the screen to snap to a perfectly round shape. Adjust the size of your elements by moving your Apple Pencil. And when you are done, digest and hold everything that we are holding right now. And when we have this shape, ledgers go inside of it and let's add the facial features. So again, just go into one side. Firstly, if you need to, you can just create one line that is going vertically. One line that is going horizontally is to find the approximate center. And if it's easier for you, you can add the facial features in that way if you feel it, very bold ledgers go and create the facial features all by ourselves without any auxiliary lines. Let's firstly go over our left side and let's add a little dot for the first eye. You can play with this size. So you can play with the placemats when you have it over the first side. Let's move on to the opposite side and let's put the second eye. We will need to put it on the same line and we will need to keep the distance from this side similar to the one that we have over the left side. So let's just go and try to do that. When you have these two isolate, just go and add a little mouth. We will go right between the eyes and we will start by creating a little ellipse like that. When you have it on one side, we will need to go to the opposite side and we will need to mirror it. On the bottom, we will start from the same dot. We are intersecting these two ellipses. And when we hand the sheep, we will just go inside of it and we will shade it. So basically we have created a little hearts. When you have it, ledgers go underneath the eyes and let's add little cheeks if you want to. So again, the same way as before, just going there and starting by creating the shape of the circle. Hold your line and the end. Hold one of your fingers on the screen, adjust the size to your liking. And if you need to adjust it even more, if you need to adjust the placement, go over the top to edit shape when you have the first cheek, let's move on to the opposite side and let's add the second cheek. So the same way as before starting by creating this circle. Hold your line and the end hold one of your fingers on the screen, a jazz this size and adjust the position by going over the top to edit shape. Now let's tap on the screen and if you want to weaken, go and add little eyebrows. So e.g. let's just go above our eyes and let's create little lines like that. When you have done one side, Let's move on to the opposite one and let's do the same thing here. You can play around with different shapes. It's all up to you when we have our facial features, Let's just go and start aging our race. So we will start by going over the top a little bit above our sheep on the sun. And we won't go in a circular direction with the lines like that. You can play around with their size. You can play around with the distance from one another. You can play with their amounts. It's all up to you. Now we just need to go circularly and create a few lines like that. When we have these lines, we will need to turn them into little triangles. So let's just go and start from the top one and we will create a triangle like that. As always, you can play with the size. You can play with everything that you want to play with. And when we have the first triangle ledgers go along these lines and we will add the triangles there to this line that we have created before will be right in the center of this triangle. When we are done agent our triangles, we are done with the sun. Now let's go and find some place that is blank right now. And let's create a little star. We will go there, e.g. and we will create it in that way. If you're feeling very confident, you can start by creating the lines like that. She'll just go in alone the shape and creating the whole star. Or if it's easier for you, you can start like that by creating this star in that way and then turn this very straight corners into the software and erase all the lines that you don't meet. When you have it. We will go inside of the shape and we will add some facial features. So again, let me just start by creating the ice. We will go over the left side firstly, and we will add the first dot. Play around with this size, play around with the placement when you have the first ILS grade, the second I own the opposite set. Try to keep the same size, try to put it on the same line and try to put it on the same place that you have it over the left side. When you have it, ledgers go and add our little mouth. You can play around with the shape of the mouth. So e.g. let's just go and create a little kiss him up. Basically, we will need to go between the eyes and we will need to create a digit three. If you want, you can go over the top on the eyes and you can add some eyebrows. When you are done, you can go underneath the eyes and add little cheeks if you don't want to let continue by creating another object. Let's continue by creating a little envelope with a love letter. So let's just go to some place that we have blank now and we will start by creating a little rectangle. So the same way as always, just go in there and with one line we are creating the sheep and we will hold it at the yet if you want to adjust it even more, Let's go over the top to edit shape. If you have the option rectangle, you can tap on it. If you don't have it, just go manually and a Jazz your little sheep, if you want to place it differently or if you want to make it bigger or smaller, It's up to you. When you are satisfied with the Shape Layer, just tap on the screen and let's go inside of this shape and let's create some lines here. Firstly, we will go over the top part and we will create LSL triangle there. So just go firstly over our corner on the top-left and creating the line like that, hold it and the Yan's if you want to. And when you are done, ledgers go over our right side and let's continue by creating a diagonal line going through this corner that we have over the top-right. When you have it, alleges go to the corners that we have over our boards and parts. Firstly, to the left side. And we will create a line like that. When you have it, we will go to the opposite side and we will add the same line there. You can play with the angle, you can play with the whole line in general. And when you have this little envelope ledgers go and add a little heart in the middle. We will seal our envelope with a little hearts. Let just go there and start by creating a curve like that when you have it on one side, Let's edit on the opposite sex. Play with this size and try not to intersect the lines that you have right here. When you are ready with your little heart ledgers, grab our eraser tool and we will erase all the lines that we don't meet. Now we are done with our envelope. So let just go find some place and let's continue agents and miscellaneous objects. So e.g. let us go and add a little flower right here. We will start by creating a little curve like that. You can play with the curvature. You can play with this size. Everything is up to you. When you have it. We will go over the top of it and we will create a little shape like that. So starting from the bottom and create an FAQ loops like that, closing the shape when you have it's ledgers grab our areas are two areas, this line that we don't need, and let's add some leaves. So go into this little stem that we have, go into one side firstly, and creating this shape like that when you haven't done one side, Let's move on to the opposite side and let's add the similar shape. If you want to add similar flowers somewhere else, ledge as guilt and z, that when you are done with your flowers, allege us go and create a magic ones. We will find someplace. And we will start by creating a line going down. When you have the first-line. If you want to make it thicker, you can create another line going a little bit to this side. When you have it, we will go over the soap and we will add a little stars or this top area. So the same way as we have it here, you can start just going boldly and creating the whole shape. Or you can start by creating a star like that. You can hold your land. Again. You can snap this shape to a better shape if you need to move it, go over the top to Edit Shape, and let's put it right onto our little stick. When you have it alleges tap on the screen and if you want to, we can go and smooth arc Warner's by creating the curves instead of the various trade corners. If you don't want to just grab an eraser tool and erase all the lines that you don't need. Now when they have r-star ledgers go to this teak and we will add some little winks. Firstly, going over one on this side and creating the first shape like that. When you have it, we will go underneath it and we will repeat it here. If you want, you can play around with this size. If you don't want to, you can make them similar to one another when you have these two shapes over one of the sides, Let's move to the opposite side and let's mirror that ends when you have it. We can close the shape on the bottom. If you have a thick Stieg and LED gels go to some places that are blank right now and add a few more objects. E.g. ledgers go over the top area and we will add the beak hard here. So the same way as always, we are starting from one side and we are creating a curve like that. When you have a ton of one side, Let's move on to the opposite side and let's mirror these lines. Just the lines to your liking. And when you're satisfied, ledgers go inside of this shape. And let's add our facial features. Let's just go and create two dots for the eyes. Starting from the first eye over the left side and eight in the second eye on the opposite side, trying to keep the same size and the same distance from the sites when you have it allege as guilt between the eyes and let's add a little mouth. So again, we will start by creating an ellipse like that. So you can play around with this size when you have the first Alex, let's move on to the opposite side and let's create another ellipse here. When you have this shape for the math, let's just go and add some eyebrows. If you want to end the cheeks, let's go underneath our eyes and let's add our little circles. When you are done with this big hard allege as goo and find some blank spaces that we can fill in. E.g. ledgers, find some blank space and we will add some berries on this tick. We will add it very easily by creating this tick like that. Firstly, then we'll go over our sites and create a few more lines. And these lines, we will add little circles. If you want to add the similar objects to some different places, Let's go and do that. And when you are done with the berries, if you want to add more details, you are welcome to do it. So e.g. let's just go and add a few more little hearts. If you want to add some different elements, you are welcome to do just feel in assembling spaces. And when you are done, we are done with our sketch. In the next part, we will add the colors. 6. Coloring the Castle: Let's start our color and partly from some tiny preparations, we will firstly go to our layers and we will rename our layer with the sketch. So later on it will be easier for us to navigate through the layers. Let's just go to this layer. Let's just tap on it and let's choose Rename. Let's go with kitsch. And when we have rename this layer, Let's just go and create one more layer for our coloring part. To do so, we will need to do to the top right and we will need to tap on the plus icon when you have a new layer, Let's tap on it and let's rename it as colors. And when we have the new layer, we will need to put it underneath our layer with the sketch because we want to see what's happening onto the layer with the sketch and we want to recreate it. Ledgers go to this layer with the colors. When it is selected, we will hold it and we will drag it under our layer with the sketch. Now when we have it in that way, we will need to go back to earlier with this gauge and we will need to change the opacity level of this layer. Opacity means how transparent you earlier is and how transparent all the objects onto this layer are. We will need to go back to this layer. We will select it and we will tap on the icon. You can see that we have a list with some titles and also we have this opacity slider on the top. We can go grab this handle and move it toward the left side. When you are comfortable with the opacity level, we can tap one more time, once earlier with this gauge, and we will go back to earlier with the colors and we will start adding these colors. We change the opacity level to make sure that we will see what's happened in both on earlier with the sketch and on earlier with the colors. So now let us go back to early with the colors and we probably can start adding our calories, but we will need to go and change the brush. Let's just go back to our brush library. We will go to the calligraphy folder and we will choose monoline brush. While we're still here under the brush library, we can go and change our brush just a little bit. Let just tap one more time once a brush and we will get inside the brush studio. You can see that we have some titles over the left sides and we will need to go under stabilization. Here you can see that you have the value stream line and it has the amount slider. That's what we're going to be changing when the amount is on low value, you can go to the drawing pad and check out how it works here. So let's just give it to the drawing pad and create some lines. You can see that it is repeating your natural flow of the hands and it makes it very natural. So that means that you have some jagged lines. It might be not very smooth. If you liked it in that way, you are welcome to use it in a low value of the amount of streamline. Or if you want to make your lines very smooth, we will need to go back to this amount slider and we will need to increase the streamline value. Now when you increase it, ledgers go to our drawing pad one more time and let's try out it one more time. Now you can see that you lost a little bit of control over the line, but your land is very smooth. You can play around with the amount that works for you. If you don't want to change it, you're welcome not to do that. If you want to play around with the amount, again, you are welcome to do it. And when you're done, ledgers go and he'd done over the top-right, we will start eating our colors. Remember that you can always get back to this value and you can adjust it. So now, when we have prepared our brush and when we have a new layer, Let's just go and select the color. So we are going to our color palettes, and let's start by creating the colors for our little castle. So we will start by choosing the color within the pink lights. Led just tap on it to select. And we can see that we have our castle probably very similar on both sides. So that means that we can use one of the options that Procreate has to ease in-app. Our process ledgers go to this wrench icon. We will go under Canvas and we will go to the drawing guides. You can see this value here. We have this little toggle and we will need to toggle it. You can see that now we have this little grid that going through the whole shape of our Canvas. But this is not the option that we need to use right now. So let's just go to Edit Drawing Guide. And we will see that we have a new window and this window has a little panel on the bottom. We will need to use the option that is called symmetry. Let's just go and tap on it. And when you choose it, you can see that we have this line that is going from top to the bottom, and it has two little nodes, one blue and one green. The green will let you to rotate this line. The blue one will let you just move this line. So we will need to put this line right in the center of our castle to make sure that it will be mirrored on the both sides. Ledgers go drag this line and try to put it in approximate center when you aren't Dan ledgers he'd done. And we need to make sure that our layer is not assisted because we are using the assisted drawing right now, let's just go back to our layers and you can see that this layer with the colors now has a little sighted assistance. If we go back to our canvas and if we just create a line, you will see that it is mirroring on the opposite side from the one that you are adding this line on. So that's exactly what we need. Now let us go and adjust the size of our brush. We are going into this slider that we have on the top-left and ledgers go and repeat these lines that we have over the left side, we will start with the body of our castle legis. Firstly, go and repeat the slides that we have for the tower. Just go into the soap and creating the first line the same way as we did with our sketch. You can just hold your line and the end to create a straight line. When you have the first line, you can see over the opposite side, we are creating the same line on to the next tower. That's exactly what we need. Let's just go and continue adding the lines on our, it's our our main goal here is to create the closed lines. Close lines means that you don't have any gaps. And we need it for later on when we are going to be putting the color inside these slides. So let just go entropy, the shape of the tower. You don't need to repeat everything with 100 per cent of similarity. If you want to adjust some elements, you are welcome to do it. So now when we have this closed shape of the rectangle, ledgers go and drag and drop the color inside of this shape. To do so, we will need to go over are at, so prior to this little icon with a color, we will hold our Apple pencil there and we will just drag the color to the needed area. Now you can see how easily we recolor these objects. When we are done with this part, alleges go and recolor our wall here the same way as before, we arguing over the left side or if you want, you can go over there right side and just create these little pieces that we have over one of the sides the same way as before. Just go in and creating straight lines, hold the line and the ends. And if you need to adjust it, your over-the-top to edit shape. When you've recreated this shape and when you are sure that you don't have any gaps, ledgers go and drag and drop the color. Now we add in the shapes for the main shape of our castle. And that means that we can go and create our took parts. Ledgers, go to our color palettes and we will select a different color. This time, let's pick up being bright with this color. We will go to one of our hours on the top of it and we will recreate the shape of the roof. Let's just go and try to do that. You can start by creating the shape on the triangle. Or if you want, you can just go entropy the sheet that you have on say your sketch. Remember that you need to create a closed shape. When you have the closed shape layer, just drag and drop the color. And now if you take a look very carefully to your shapes, you can see that we have little gaps. Ledgers go to our layers and just for 1 s, we will hide our layer with the sketch. We will check out whether we need to change some elements. Maybe we need to cover some places. And we will go to earlier with the colors and we will change them manually. So e.g. we have this little line over the bottom part. So let just go and manually recolor it. When you are done, ledgers get vector earliest and we will unhide our layer with the sketch. So we are going into this little checkbox and we are tapping on it. Now we can continue adding details. We can do it on the same layer, or we can go and add another layer and add the details here. Let's just go and try it out on the different layer. So again, we are just go into r plus I can, we are tapping on it. If you want to rename this layer, you can go and do that. But later on, we will merge these two layers together so it doesn't matter if you are a different name here. So we will need to go to this layer and we will need to manually make it assisted. So we will need to do it in that way. We will tap onto this layer, into this little menu. We will need to choose drawing assist. Now, let us go over one of our sites and let us try out if it works. If you are repeating the line on the opposite side, if it's mirroring, that's exactly what we need. Now let's just go select another color. This time it will be dark magenta. And with this color, we will go and add our little windows. So again, just go into one of the sides and repeating our shapes that we have on the sketch ledger started by creating the outlines. And for this window that we have as a rectangle, we can go and create the shape just with one line without an holding our Apple Pencil, holding it on the end, the ends on the line, you can see that we snapped it to a better shape. And if we need to adjust it even more, we are going over the top to edit shape. If we have the option rectangle here, we will choose it. If don't, we will go and manually adjust our lines. When you have it, we will tap on the screen and if we need to adjust it in any way. So e.g. here we have some gaps. We can go and manually do that. Remember that all the lines should be without gaps. And now when we have our outlines, lead, just go and add the colors to them. So again, we are just starting by going over our top right and we are dragging and dropping the color to the first objects. When he did it over the top, you can see that we have the option continue with recoloring. And you can see that now we have this little handle that we can move to the object that we need to recolor. Just hold your Apple Pencil and move it to the next window. When you did it, you will see that you have recovered this object. And we have one more window. So we can go and just tap inside of this window and we will recolor it to that easily. We can recover our objects. Now, we will need to go and deselect everything by going to this icon that is now highlighted or the top left, which is our magic wand tool. And we can tap on it one more time to get away with this little list. When we are done with our windows, let just work on the door. So one more time we are going back to our color palettes and we will start with the color within the light brown. Let's just tap on it and we will go back to our Canvas. We will zoom in our Canvas to the door and we will go or one of the sides and we will try to recreate what we have on our layer with the sketch layer, just go and try to do that. Don't worry, if you're arguing a little bit beyond the frames of your wall, whole Julian and the yens and try to make a smooth connection. If you have something like that, try to do it one more time. Try to make this very smooth. When you add down, Let's just go over the bottom part and ledgers connect the sheep when you have the closed shape, when you don't have any gaps, lead, just go and drag and drop the color inside of this area. And as we went a little bit beyond the frames, we will need to solve this little problem that we have. On the bottom, we can just grab our eraser tool and try to erase everything with a very high level of carefulness. But we can go and do it in a different way. Ledgers go back to our layers. We will give it to this layer number three where we are adding our details and we can do this thing. We will tap onto this layer and from the list we will select clipping mask. When we are choosing clipping mask, we are clipping these separately or to a previous one. And that means that when we are adding the details or any other objects onto this layer, they will appear only on the areas that we have on the previous layer. So you won't be going beyond the frames and you are not going to be adding any more details beyond the frames on this layer that you have underneath, you can try it out and create some lines and you will see that you are not going beyond the freeze. So now when we have these, we can continue adding our details. Ledgers go over our layers, and let's create one more layer. We will put this layer underneath our layer with the castle. So just go to this plus icon, create a layer. If you don't want to rename it, don't rename it. If you want, go tap on it and choose Rename. When you hand this layer, we will hold it and we will put it under our layer with the colors. And again, we will need to make sure that this layer is assisted. So let's tap on it and from the list, we will choose drawing assist. Now, we will select the same color that we used for our windows. We can go back to our color palettes and select it from here. Or if we have this color onto our canvas, we can invoke the eyedropper tool and select it from here. To do so, we will need to go to our Canvas and we will need to hold one of our fingers on the color that we want to pick. Let's just do it until we see this little too. If you move your finger, you will see that or that soap on this tool, the color is changing. And in that case, we will need to go to this color that is dark magenta. And when we have this color over the top, we will and hold our finger. And you can see that your color on this little tool or the top-right, is changed now, and that's exactly what we need. So now with this color, we will go over the top and we will add this little stick for the flag. If you want, you can go and change the size of your brush, play around and find what works for you. Hold your land and the ants tried to make it very straight when you are done. And if you need to adjust and go up to Edit Shape and adjusted, if you're satisfied with this tick, we will need to add one more thing. Ledgers, go back to our color palette and select this color with the name yellow, orange. With this color, we will go over the top only stick and we will add a detail here. So firstly, let us go and increase the size of our brush and we will add a little dot over the top part. You can play around with the size of this elements. And when you are done with this task, we are done with our Symmetry tool. So that means that we will add the rest of the objects, the rest of the details in a different way. Let's just go and turn off our asymmetry. To do so, firstly, we will need to go over our range icon. We will go into Google Drawing Guide here, you can see that this line of symmetry that we're going from top to the bottom disappeared. But we won't need to do one more thing. We will need to go back to our layers and we will manually needs to adjust these layers and turn off assisted drawing here. So let's just go and start from the bottom. We will tap on the layer and we will choose Drawing Assist from the list. When this little title disappeared, we will go to the next layer and we will do the same thing here. Tap on the layer, choose Drawing Assist, and one more time, tap on the layer and choose Drawing Assist. Now we can go and add all the rest of our details. Firstly, let just start from the bottom layer we will go to earlier for where we have added our sticks. On the top, we will select the same color that we use for our windows and we will read this rope ledgers go and invoke our Eyedropper Tool. Hold in one of our fingers on the color that we want to choose. And I'm holding it when we have it. Let's just go and create this rope very easily. Just create an arc curve and holding it and the ends of the line. Hey Jazz the angle. And when you are done, we can continue by adding the rest of the elements. We will need to take a look at our picture and we will need to understand which elements will overlap the other elements. So e.g. if we take a look at our robe and onto our little elements over the top part, we can see that our flux will be underneath our little lines that we have on this layer. So we can go and add the details on the same layer, but it will be a little bit hard for us to just go create this lines very carefully and maybe then grab our eraser tool and erase the rest of the areas that we don't need. So it will be easier for us to create another layer, put it underneath our layer with this rope and with these sticks. And we can just add the details onto this layer. And later on, we can just merge these two layers together. So let's just go and do it in that way. So firstly, we will go on to our layers and we will create one more layer. So let's just tap on the plus icon. And this new layer we will need to put underneath earlier with the rope and with these two sticks. So when it is selected, we will hold it and we will put it under. When we have this layer, we will go to our color palette. We will select some color and we will start aging are a little flex. Let's start with the color with the name Sian. When we have this color, Let's just go and repeat the shapes of our flex. When you hand the sheep led, just drag and drop the color. Remember that you need to close the shape to use this option when you had the first flag over the top ledgers go over our right side, and let's create another flag here, drag and drop the color. And when you are ready, ledgers go and add the color to these flags that we have on the rope. You can start with a similar color that you used or that soap, or you can go and select the different color, e.g. let us start and create our first flag with the same color, just going over the lines that we have on this gauge and recreating them. Remember that we will need to close the shape, drag and drop the color. And when you are ready, ledgers go to our color palettes and let's let another color. So e.g. let's select this yellow, orange with this color, we will go to the next flag and we will recreate it. When you hand the second flag, ledgers, get back to our color palettes and let's let another color. So e.g. let's select this bright pink with this color. We will go and recreate the next flack. One more time. Let's just get back to our color palettes. Select the color that you like, and when you have it alleges, get back to our canvas and recreate the last flag. When you are ready just for 1 s ledgers get back to our leaders and we will hide our layer with the sketch. We will check out whether everything is nice and clean, whether we need to change some parts, maybe erase some details if everything is looking okay, we will just go back to our layers and we will merge that ledgers go to this layer number four, where we have our robe and these two sticks over the top part of our castle. We will select it, we will tap on it, and from this list we will choose Merge Down. Now you can see that these details are on one layer and the same thing we can do with our main layer with the colors and with this layer with the details that are underneath. So let's just go to our layer with the colors. Let's select it, Let's tap on it. And again, let's choose merge down. Now we have our castle and all the main elements on this layer. What we need to do next is to go back to earlier with the details and add a few more details because we have some ledgers get back to earlier with this gage, we will unhide it. Make sure that you're on the layer with these details, with the windows, with this little door. And let's just go and add a few more in details. Firstly, let us go and work on our door. We will need to add these fibers here. And again, if we just go and select the color, so e.g. it will be brown. If we start adding these details, we will be going beyond their friends and it's not what we need. We can go and adjust these two. We will need to get back to our layers. We will select this layer three. We will tap on it and we will choose alpha lock. You can see that now you have the checkerboards once a year earlier, and that's exactly what we need. It works similarly to the clipping mask, but it is on the same layer. That means that if you will go and see if it will start adding some details, you will be aiding them only on the existing areas. So now let us go and create this little fibers. When you are done ledger select the same color that we use for our windows. And with this color, we will add the handout. So again, we are invoking our eye dropper tool. Just go into the area that we want to pick the color from and hold in one of our fingers when you have the needed color and hold your finger and ledgers go and add this little handout. When you are done with the door, let just go and add the rest of the details. So one more time we are going back to our color palettes. And let's start by aiding the breaks. We will go and select the color with the name pink salt. With this color, we will go to our bricks and we will recreate them. But when you have selected the color and if you go to your tower and if you start adding your bricks, you will see that nothing is happening. That's because we have our Alpha lock on. So let's just get back to the earliest alleged. Just tap once on our layer three and we will select Alpha Lock from the least. Now, when it is turned off, we can go over all of the areas and we can add the colors here. Just go back to our breaks and let's recreate that same as before. Let just start by creating the outlines. Now for convenience, ledgers get back to our layers and we will hide our layer with this gage. We will check out where there are breaks our old clothes, or if we need to go and erase some parts, we'll grab our eraser tool and we will change them. And when you are done with this task, we will go and start adding the color to one of the breaks. So just go into our top right corner and dragging and dropping the color to the area inside. And we will continue feeling with recolor. When we have this little handle, we will move it to another break and then we will just go and tap on the rest of that. When you are done, let just tap onto our magic one tool one more time to deselect everything, sapling it one more time to get away from this little leaf ledgers, get back to our layers, and let's unhide our layer with the sketch. Let check out whether we need to add more details. And yes, we need, we will need to go and add some details on the roof. So let us get back to early and number three, ledgers. Get back to our color palettes. And let's select the color with the name almost pink. With this color, we will go and add these little lines on the roof. When you're done with the first tower, move on to the opposite side and do the same thing here. If you want to add more details, go and do that. When you are done with these elements, let us get back to our layers. Let's hide early with this gauge and lead. Just take a look at our picture and if everything is looking quite nice for you, we are done with our first illustration. That means that we can go to our Lee and number three. And if we don't want to adjust anything here, we can merge these two layers together. So let just go tap on it and we will choose merge down. Now you can see that the title changed. It is now layer five. So that means that we can go tap on the layer choose Rename, and we can call it castle. Now we are done with our first illustration. In the next part, we will be creating our princess. 7. Coloring the Princess: Let's start with our princess by going to our layers and we will unhide our layer with the sketch. So let's just go to this little checkbox. We will tap on it and in that way we will know what we need to do. Now. We will need to take a look at our picture and we need to understand which objects will be overlapped by other objects. Which of them will be in the backgrounds and which of them will be in the foreground. So let's start with the ground. If you take a look, you will see that later on when we are going to be editing the colors, this object will be in the background. So let's just start from it. We will get back to our layers and we will create one more layer for these objects. Ledgers tap on the plus icon and if you want, you can go and rename this layer. Now when we have a new layer, we will need to prepare it to create our object when it is selected, we are going back to our orange icon or the top-left. We are going to the canvas and we are. So Glenn drawing guides. Now you can see that this line of symmetry is going through the shape of our castle. And that means that we will need to change it. We will need to move it to our princess. So now let us go to Edit Drawing Guide. We're arguing to the symmetry and we have these two nodes wanted these symmetry line. So let's just grab the blue one and we will move it right in the middle of our princess. When you are ready ledgers he'd done over the top-right. Now we need to make sure that our earlier East assisted. So let's just go and check it out. We will go back to our layers and you can see that layer number three now is not assisted. We will need to turn it on manually. So let's just tap on it. And from this list, we will select Drawing Assist. When you hand this little title, you are good to go and you are ready to create your object. So now let's just zoom in our Canvas ledgers, get back to our color palettes and select this color with the name yellow, orange. With this color, we will go over one on this side and we will start by creating the outline. You can use all the options and all the tools that we use before. You can hold your line and the ants, you can make it straight by going over it. It's up to Edit Shape. If you need to adjust it, just go and create the outline of the top shape. Remember that to adjust the colors, to add them to this little crown, we will need to have all the lines close. That means that we don't need to have any gaps in that way when we have the top part of our crown alleges go over the bottom part and let's close the shape with any line that you like. We will need to make it a little bit lower than we have our hair. So later on we don't have any problems with the hair. So let's just go and create some line here and connect our sheep. When you have it, we will just go over our top-right corner and we will drag and drop the color to this object. Now, when we have our crown, we are ready to go back to our layers, create one more layer and create other details. So let's just start by tapping on the plus icon. If you want to rename this layer for your convenience, you can do that into this layer we will be creating here and Lex ledgers go to our color palettes. And we will start by selecting the color with the name dark magenta. With this color, we will go and create our hair the same way as with the crown. We are starting by creating an outline. These outlines should be closed. But before starting making this outline, as we have created a new layer, we will need to turn on Drawing, Assist on it. So again, we are going back to our layers. We are tapping on this layer number four and we are selecting drawing assist. Now, if we get back to our canvas, we can create one outline and it will be mirrored on the opposite side. Let's just go and try that the same way as before. You can hold your line and the yen to snap it to a better life. And when you have the first outline over one of the sides, ledgers go and continue creating this slide on the bottom, make a nice connection between two lines. And if you need to adjust it, grad Eraser tool and erase everything that you don't need to make sure that the whole outline is closed and when you are ready, ledgers drag and drop the color insects. Now we have our color for the hair and on the same layer we will go and add the legs. So firstly, let us get back to our color palettes and we will start by creating the color within the same light, pink. When we have this color, we will go to one of the sides and we will recreate our ellipse here, ledger started from this rectangle. You can create a rectangle just with one line. Hold your line and neons if you need to adjust it, Let's go up to Edit Shape. If we have the option rectangle here, we can choose it. If we don't have it alleges go and manually adjust it. When you have the needed cheap ledgers, tap onto our screen and let just go and add the color inside of this shape. And when we have the shape for the leg, leg just one more time, get back to our color palettes. We will select the same color that we use for the hair, dark magenta and on the boards. And we will create this little triangle. When you have this shape lead, just drag and drop our color inside of this shape. Let's go to our layers. We will hide earlier with this gauge and we will make sure that everything is looking fine. If you need to adjust some parts, if you miss color at some places, or if you need just to go and grab your eraser tool and adjust your shapes, go and do that. And when we are done, ledgers get back to our layers and we will unhide our layer with the sketch. Now we can just go to these two layers, one with a crown, one with the hair and legs. And we can merge them together so we can go over one of the layers on the top. We will tap on it and we will choose Merge Down. And when we merge these two layers together, lead us go and create one more layer on which we will create our dress. So I just tap on the plus icon. If you want to rename this layer, go for it. We will need to make it assisted one more time. We are tapping on the layer and we are choosing Drawing Assist. Now when this layer is assisted, ledgers get back to our color palettes and we will select the color with the name being right. We will start by going over the bottom part to this skirt, and we will create the skirt. So let us go and play around with our shapes. You can do and created very rectangular the same way as you have it on this gauge. Or you can connect it with its apart. So they just go and create the first curve. As always, use all the instruments that you know, hold your line and the ends. If you need to adjust the curve, go over and it's up to Edit Shape. Play around with the notes. Find what works for you. And when you are done, LED just tap on the screen to get away from this mode. And we will go over the bottom part and we will connect our dress here. Remember that all the lines should be closed when you have it's Alaska or that soap bars. And we will do the same thing here. We will connect our skirt over-the-top parts. And when you have it, alleges go and drag and drop the color. Now we have this skirt and let's work on the boards and part. We will add a different color to this little triangle to make it very accurately, we know how to do that. We will need to go back to our layers we will tap onto earlier with this skirt and we will choose Alpha Lock when we did it, we will just go back to our color palettes. We will select the color either Sian or light serum, and we will add this color to this little triangle. When you hand the color LED, just go and create our little curve. Make a nice connection over the soap. And when you are ready, we can just go and drag and drop the color to this area. But before doing it, ledgers go back to our layers and just for 1 s, we will hide our layer with the sketch. Now make sure that you are on the layer with this skirt. And let us go to our color icon and we will drag and drop it. If you have the results like that, don't worry, don't and hold your Apple pencil and take a look at the top. Here we have eyelids, a line which is blue, which is called color dropped threshold. If we don't hold our Apple Pencil and if we move it to the left, you will see that only this area that we want to recolor now is recolored. And also you can notice that if you move it too far, you will have a little gap between the outline and these areas that you have just recolored. So you need to be quite accurate and you will need to find the position of this threshold when you don't have this line, or if you have just a little line, you will need to unfold your Apple pencil and go to this area and manually recolor this line. So let's just go and very quickly do that. Now we are ready with our skirts. So that means that we can go back to our layers and we can get back our layer with the sketch. Now, we can continue by creating our arms, but before doing it alleges get back to earlier with this curve. We will tap on it and we will deselect alpha log here. When we did it, we will create one more layer for our arts. Again, go into r plus icon, and we will need to make this layer assisted tapping on this layer and choosing Drawing Assist. Now when we have this new layer, ledgers get back to our color palettes and we will select the color with being soft, we will go over one on the sides and we will repeat the shape of the arm. Close this shape. And when you are ready a ledger drag and drop the color to this area. And now we will go and turn on Alpha lock onto this layer to recolor the bottom part of the arms. So again, going back to our layers, tapping on this layer five with our arms and select an alpha lock. Now when alpha lock is turned on, we are getting back to our color palettes and we are selecting the color with the name pink light. With this color, we will go or the bottom part and we will recolor the arms. If you want to add more details, you are welcome to do it. So e.g. let's decrease the size of our brush and let's create a few stripes. If you want to make sure that everything is looking fine, you can just get vector year lease and hide your LEA with this gauge easier. I satisfied with the result. We can unhide earlier with this gauge and we can merge these two layers together, the one with the skirt and the one with the arms. So to do so, we will need to go back to earlier with the arms. We will tap on it and we will choose merge down. And now we are ready to go and create this top part of the dress ledgers. Get back to our color palettes and let's select the same color that we used for the skirt being bright with this color, we will go and create this subparts. You can play around with this shape. Just go and repeat what you have on your sketch. When you are done with this shape layer, just drag and drop the color inside and let us get back to our list. And we will hide our layer with the sketch. And we will check out whether we need to adjust some parts. We can go and erase this little parts over the shoulder. So lets just grab our eraser tool and we will erase everything that we don't meet. Make this whole shape or the top very smooth. And when you are done with the eraser, ledgers, get back to our brush and manually ledgers go and recolor these two little objects, and now we have the dress. So ledgers get back to the earliest. We will unhide our layer with the sketch and we will check out whether we need to add some details. We have this little heart. So let just go select a different color and let's edit. We will get back to our color palette and we will select the color with the name almost pink. With a scholar, we will go and recreate our hearts. When the outline is ready. Ledgers go and drag and drop the color if you need to adjust it. If you have this little gap between the outline and the main shape ledgers, go check it out. We will just need to go back to our layers height earlier with this gauge. And if we need to adjust it, we will go and manually adjust it. If you want to add more in details, you are welcome to do it. E.g. ledgers get back to our layers and we will go to this layer with the dress. We will tap on it and we will choose Alpha Lock. Now, we will go and add a little bouts with the same color. Let's just go to this area where we have the top and the bottom meeting and we will just create a little belt here. Just go and increase the size of your brush. And let's create a little line like that. Try to make it smooth. If you need to adjust it, go over the top to Edit Shape. Ethan need to adjust the shape here. Don't use the eraser tool. We will need to go and select the same color that we already have. So e.g. this pink one, we can do it by invoking our eyedropper tool. We will go to the areas that we want to change and we will go over them and change them. And now, if you want to add more details, it's your time to shine. Ledgers go and add a few buttons and maybe some additional elements on our address. Let's just play around. And when you are done with this task, alleges, get back to our layers and we will unhide our layer with the sketch. Now we are ready to add our face. Select, just go and create one more layer. If you want to rename it, go for it. We will need to make it assisted. So I just tap on it and lead choose Drawing Assist. Now, we will get back to our color palettes. We will select the color almost being. And with this color, we will do and recreate our shapes of the face as always, just creating the outlines. When you are done with the outlines, ledgers drag and drop the color inside of the shapes, eating it to adjust some parts and grab an eraser tool and adjust them. And when we have the base for our phase, ledgers, go and select the same color that we have for our hair. We are invoking our eyedropper tool, just reminding you that you can hold one of your fingers on the screen until you have this little too. When you have that color. Let's just go and add our lines for the facial features. Cool, Julian, and the ends. If you need to adjust your over-the-top to edit shape. When you are done adjusting it, tap on the screen and let us go under these little sheep owned the eye and we will add the eyelashes. When you have them, ledgers go and add our little mouth. Play around with the shape, play around with the position. It's all up to you when you have your facial features, ledgers get back to our color palettes and we will select the color with the name pink bright. We will increase the size of our brush and we will go and put one dot for the cheek. And when you did It's ledgers. Get back to our layers. Let's hide our layer with the sketch and let checkout whether we need to adjust some of the parts. Let's make everything nice and clean. If you need to adjust the empire's just grab the eraser tool and erase everything that you don't meet. When you are satisfied. Ledgers go and combine all these three layers together. So we are going firstly on earlier with the face, we are tapping in it and we are choosing Merge Down. And we will do it one more time. Tap on the layer and choose merge down. When the whole Princess is on one layer, we can one more time go and check out whether we want to adjust some parts. Just take a look at the connections and try to make everything nice and clean. And when you're done with this task, let's just go and turn off our assisted drawing. So we are going back to our arrange icon. We are going to the canvas and we aren't so Glenn drawing guide here. And also we will need to do it on to our Layers panel. Go into early with the princess tapping on it and choosing Drawing Assist. And while we're still here under our layers, Let's just rename this layer so we will tap on it. We will choose Rename and we will call it princess. And when you are done renaming your layer, we are done with our second illustration. So in the next part, we will be creating our dragon. 8. Coloring the Dragon: Start with Andrea again. Ledgers get back to the layers and we will unhide our layer with the sketch. Now when we have it, alleges go and create one more layer for the body of our dragon. So tapping on the plus icon, creating a new layer, if you want to rename it, go for it. When we have this new layer, we arguing back to our color palettes and we will select the color with the name pink salt. With this color, we will zoom in our Canvas to our little dragon and we will go and create the outline for the body ledgers Gill and very quickly do that when you are done with the outline and when you are sure that it is closed, ledgers go and drag and drop the color inside of this object. When it is done, we will go and we will work on to this area on the tummy. So firstly, let us get back to our layers. We will go to this layer with our body on the Dragon. We will tap on it and we will choose alpha lock. When we have our Alpha Lock turned on, we are going back to our color palettes and we will select the color with the name pink lights. With this color, we will go and create the outline for our little tummy. When you have it, ledgers goo and drag and drop the color. If you have the result like that, don't worry, just move your Apple pencil toward the left side until only this area is recolored. If you have a little outline between your outline and this main sheet, just go manually and tricolor it. Let's make sure that we don't have it by going over our layers and heighten our layer with the sketch. If we have this little gap, we will go and manually recolor this area. And when we did it, and when we have our sketch layer, hidden layer, just go and work more on our whole sheep. To do so, we will need to go back to earlier with this main shape. We will tap on it. We will choose Alpha Lock from the least to deselect it. And we will go grab our eraser tool or we will go and grab our brush and we will work on to our sites. So they just go and make them very smooth. When you are done adjusting your shape, ledgers, get back to our list and we will unhide our layer with the sketch. And we can notice that we will need to work on to this little arm. So ledgers go and invoke our eye dropper tool. So just holding one of our fingers on the screen and we'll just go to this area and manually we will recolor it. And when we did it, we are ready to move on and we are ready to add other elements and we will add them on the separate layer. So let's just go and create one more layer and we will drag it under our layer with the main shape. Layer five, we are holding it and we are moving it down under our main shape. When we have it, we will go and create our legs and our little wink ledgers go and create that. We are using the same color of the main shape of our body. When you are done with this task ledgers get back to our leaves. We will hide our layer with this gauge and we will check out whether everything is looking fine. If it is, we will get back earlier with this gauge and we will continue aging this little comb elements. We will go firstly to our color palettes and we will select a different color. This time, it will be pink light. With this color, we will increase the size of our brush and we will just go and create this element just with a stroke. So create the first stroke if you want, hold your line and the ends if you need to adjust it or the soap. And when you had the first stroke, ledgers go along the whole shape and create a few more of that. Let's make sure that everything is looking nice by going to our list and heighten our layer with the sketch. If you're satisfied with the result, we can go and combine these two layers together. So firstly, way I go in on the layer, on the top, which is our main body. We are tapping on it and we are choosing merge down. Now, if you want, you can go entry name this layer as dragon. When we have it's ledgers, get back earlier with this gauge and let's add the rest of the details. So firstly, let's work on to our fleet. We will go back to our color palettes. We will select the color with the name pink bright. And we'll create this main shape again, starting from the outline. When you have the outline and when it is closed, we are going back to our top-right corner and we add dragging and dropping the color. And now we will go and change the color and add these little elements in the middle part. You can go and invoke the eyedropper tool and select the color that we used for the column. Now when we have the color, Let's just go and create the outline for this heart. And when you have the outline, you can just drag and drop the color or manually recolor these elements. If you want to add more details, you are welcome to do it. And when you are done with this little flame ledgers, get back to our layers. We will unhide earlier with this gauge and we will add our facial features. You can do it on the same layer, or you can try out to create them on the separate layer. And then if you want to adjust them, digest them, and merge these two layers together, Let's just go and select our color with the name dark magenta. We will start by creating these two dots for the eyes. Let's just increase the size of our brush. And let's put these two dots. When you aren't done. Ledgers get back to our color palettes and we will select the color within the almost pink. We will create our Fink's. When you have the things ledger, select the same color that we used for the eyes by invoking our Eyedropper Tool. And we will create this little Smiley mouth hold you land and the end if you want, and if you want to adjust it even more, go over this up to Edit Shape. And now let us get back to our layers. We will hide our layer with the sketch and we will check out whether we are satisfied with our results. If we have some place that we want to adjust, we will go and do that. If you want to add more details, you are welcome to do it here as well. When you're satisfied with your results ledgers get back to our layers. Let's make sure that we have renamed earlier and later on. In the next chapter, we will add all of our miscellaneous objects. 9. Coloring the Sun: When we are done with our main characters, let's continue with the miscellaneous objects. So firstly, we, I go into our layers and we will unhide our layer with the sketch. When we know what we need to do, we will need to create one more layer and we will start from the sun. So let just tap on the plus icon and if you want to rename this layer, you are welcome to do it. Now when we have a new layer, ledgers go back to our color palettes and we will select the color with the name yellow, orange. When we did it. When I get them back to our Canvas, we will zoom it into our son and we will start from this main shape of the sun, our ellipse. So let's just go and with one line, we will create the shape. At the end of the line. Hold your Apple pencil to snap it to a better shape. And also hold one of your fingers on the screen to snap it to a perfectly round circle. If you need to adjust the size, just move your Apple pencil to this side. And if you need to adjust it even more, if you need to find a different placements and hold everything and go over it. It's up to Edit Shape. Find what works for you, and when you're satisfied, ledgers tap on the screen. Now let's make sure that our shape is closed. That means that we don't have any gaps onto our outline. And when we are sure allege us go to our top-right corner and we will drag and drop the color insights. Now when we have the main shape, we are ready to move on and we are ready to work on to our arrays. We can do it manually, but it is too time consuming and we don't really like too time-consuming things. So we can use one of the options that Procreate has. Firstly, let us go back to our color palettes and we will select another color. This time, it will be pink soft. When we have a new color, we will need to get back to our range. I can order the top-left and we will need to toggle drawing guide. Now, if you take a look, We will have this line that we used before. And in this case, we will need to go and change it. So we will go to Edit Drawing Guide. And when we are in the drawing guide menu, we will go to the bottom panel to the options. You can see that we have, at least here and we will need to select radial. Firstly, you will see that the line changed onto your canvas. And also we will need to go on to rotational symmetry and Assisted Drawing and toggle it to. So let's just do it. And when you're done, Let's just tap on the screen to get away from this menu. And we will need to move these little lines that we have to our son. And we will need to position this blue node right in the center of our sun if you want to match the lines that you have on your sketch with this symmetry lines, you can go to this green nodes and rotates it. Replacement that works for you. And when you are done, ledgers go over our top-right corner and we will hit done. Firstly, we need to make sure that our layer is SE set. So let's just go to our layers and we will go to this layer with our sound. If we see the title assisted, we are good to go. So now let's just zoom in our Canvas and let just start recreate and IRAs. You don't have to recreate them with 100 per cent of similarity to what you have on your sketch. You can play around and we just need to go and create some rates. Let's just go and try it out. Let's start just from the outlines. And when you are ready with them, when you are sure that they are closed, ledgers go and drag and drop the color to one of them. All of them will be changed. And if you want to adjust the shape, even more, ledgers, grab our eraser tool and let's work on them. And when we are done with this task, let's just add a few more race. This time we will be using the same color that we used for the main shapes. So let's just go and invoke our eyedropper tool by going to the needed color and by holding one of our fingers. And let's just go between this race that we already have on the screen. And let's add a few more of them. You can play with the distance, you can play with the size. You can play with everything here. When you add them with the outlines ledgers drag and drop the color to one of the objects. If you want to adjust them, ledgers, grab our eraser tool and let's adjust them. And when you are ready, adjusting your little arrays lead, just go and turn off our drawing assist. So firstly, we go into our range. I can over-the-top left and we will toggle Drawing Guide from here, but it is not enough. We will need to get back to our layers. We will need to go to this layer, which is now assisted and we will need to turn it off manually. So let's just tap on it and let's choose Drawing Assist from the list. And now when we are ready, we will go and add the facial features. So firstly, ledger select the same color that we used for our facial features on the princess. We just go there. We are holding one of our fingers invoking our Eyedropper Tool, selecting the color and go into our sun and recreating the facial features here, Let's start from the eyes. Firstly, we will just increase the size of our brush and we will put the two dots. Now when we are ready with our eyes, ledgers go to the mouth and we will do it in that way. Firstly, we will create one line going diagonally down, and then we will just go strictly to talk and we will hold our Apple pencil. You will see that you will end up with this little heart. You can adjust the size by moving your Apple Pencil. And if you need to adjust it even more, go over the top to aided sheep. You will have a lot of handles here that you can play with when you are done, Let's just tap on our screens to get away from this modes and lunges at our eyebrows. So we arguing and decreasing the size of our brush and we are recreating our shapes. When you are done, ledgers go and select another color. So this time it will be built bright. And with this color we will add our cheeks, increase the size of your brush and put the dots. Now let's check out how it looks by going to our lives and Haydn earlier with this kitsch. If you are satisfied with what you have here, Let's continue. Agent, the other objects. 10. Coloring Miscellaneous Objects: Let's continue by going to our layers and we will unhide our layer with the sketch. We need to go over all of our objects and we will need to add the color to that. We can do it on the same layer that we have our asana own. Or if you want, you can create a new layer for each object. So now let us go and select the color. It will be pink bright, and we will go over our top-left and we will recreate the outline for our heart here. Make sure that the shape is closed. And when you are alleges, go to our top-right corner and we will drag and drop the color. And when we have our shape, Let's just go and add other facial features. We can do it on the same layer, or if you want, we can create another layer and we can work on to our facial features on it. So e.g. ledgers go and do that. We will go to our leaves and we will create one more layer above. Once this layer, we will go and recreate the facial features of our heart. Firstly, let's look the same color that we use for the previous facial features. It will be this dark magenta. So let us go to our castle window. We will invoke our eye drop with x2. We will select the color from here. We will go to our facial features and we will recreate them the same way as before, just increasing the size of our brush and putting two dots for the eyes. When you are ready with the eyes, let's increase our brush even more and we will create this little hard for our mouth. Hold your land and the ends. And if you need to adjust your over-the-top to aided sheep, play around with the sheep, find the position that works for you. And when you're done, let just tap on the screen. Let's go and add the eyebrows, decreasing the size of our brush and recreating the shapes. Now link just go and select a different color. This time it will be pink light or pink soft. With this color, we will go and add the cheeks so one more time, increasing the size of our brush and putting these two dots, we have created our facial features on the separate layer. And that means that we can go and add some details on it. So firstly, let us get back to our layers. We will go to this layer with the facial features. We will tap on it and we will choose alpha lock with the same color that we have right now. We will go to the bottom part on the mouth and we will add a little time here. So just go in there without any fear and we are creating this little sheep whole Julian and the end, if you want to adjust it by going over the top to edit shape. If you are satisfied with everything here, ledgers get back to our list and we will combine these two layers together. So go into the top one with our facial features, tapping on it and choose merge down. And now let us go and hide hourly with this case just for 1 s. And we will take a look at our shape. If we need to adjust it, we will grab our eraser tool and we will adjust it. And when you are done with the heart ledgers, get back to our layers. We will get back our layer with this gauge and we will continue adding our own jets. Let's move on to the clouds. We will select the color that we use before. It will be either see an or light seal. You decide with this color, we will go and recreate the outline, makes sure that the outline is closed. And when you are sure, allege as gill and drag and drop the color when you are ready, let's select the same color that we use for our previous facial features. And let's add them on the same layer. So let's just go to the Window. We will select the color and we will recreate the facial features. When you are done with the main facial features, alleges go and select the color with the name being bright. And with this color, we will add our cheeks, so increasing the size of our brush and putting two dots when we are done with the Cloud, let's continue with this little star. Firstly, let's select this yellow color. And now we will just go to our shape and we will try to recreate it, make sure it is closed and when it is ledger, drag and drop the color. Now we will select the same color that we use for our facial features and we will add them. And when we are ready, let's continue with this little envelope. We will select the color with the name pink lights, and we will create the shape of the rectangle. Ledgers go and do that. When you have the outline layer, just drag and drop the color. And when you hand the color, we will go and add these lines. We will do it with the help of the alpha lock. So going back to our Layers tab and on this layer and choosing Alpha Lock. Now going back to our color palettes and selecting the color within the pink bright with this color, we will go and add our alliance with the same color. We will go and add this little hearts. So let's go and do that. Recolor it manually. Or if you want, you can try out dragging and dropping the color, hide the layer with the sketch and adjust your lights. And when you are ready, ledgers get back to our layers. Let's unhide our layer with this gauge. Ledgers. Get back to earlier with the miscellaneous objects. We will tap on it and we will turn off alpha lock and we will continue aging our objects. Ledgers go to the magic ones. We will start by creating the wings because they are in the background. We will go back to our color palettes and we will select the color with the name lights, CM. With this color, we will create this winks, make the closed outlines and the color insight. When you are ready, ledger select the same color that we use for the facial features and we will add the ones. Let's increase the size of the brush and let's create the line, a jazz the angle. And when you are ready, we will go and select the yellow, orange color. With this color, we will recreate the star when you are done with the outline and the color. And if you have some places that you need to fix, go and manually fix them. When we are ready with our magic wands ledgers, get back to our color palettes. We will select the color with the name Sian, and we will go to the flowers and to the little branches and we will add these branches are stamps. And when you are ready with this term sled, just select a different color and we will add them to their flowers and to this little Barrett's. And the last thing that we will need to add are these little hearts. So let's select the color with the name almost being. We will go along this objects and we will recreate them. When you are done with this task, let's just go back to our layers. We will hide earlier with this gauge and we will go alone all of our objects and we will take a look at them. And if we need to adjust them, we will go and do that. And when you add down a jazz in your own objects, the very last thing will be going to our layers and renaming this layer. So let's just tap on it. Let choose Rename, and let's go with miscellaneous. And when we did it, we are done with our illustration. Thank you for watching this class. Leave a review if you liked it, and consider subscribing for more videos in the future, looking forward to seeing your projects.