Transcripts
1. Introduction: The experience of gifting
a handmade product to your bed can be very
personal and emotional. Hi, Claudia. In this class I will
teach you how to make a simple macro meter group toy that will keep your pet engaged. Rope toys can be
used for a number of pet activities such as
steeping and playing catch, which makes the
story was the day. I will teach you the
tips and simple In techniques that will help
you make the toy with ease. The use of simple materials like cotton mix the story,
non-toxic and eco-friendly. With my technique, they
are very simple to make and can be
created by everyone. Join me in this class
and let's make one.
2. Materials Required: The materials required
for this class are macro amide group ten, minimum tick three meters. Macro made group three
among take 50 centimeters. Scissors, clot clip, marker
and pen ruler, paper cutter, masking tape, cutting mat and cardboard of 13th centimeter
by 26 centimeters.
3. Cardboard Template Making: In this video, let's
see how we can make the cardboard
template for the toy. For that, I have
taken 13 centimeter by 26 centimeter cardboard. What I'm going to do
is the first step, I'm going to divide
this into half. That is 13 centimeter
from the bottom, 13th centimeter from the top. Now let's connect
these two points. I holding this ruler, I'm just going to
bend it like this. If you want, you
can make a score, a score like this. We have bending this
cardboard into two because template can be strong. In this way. We can
bend this bending. Just going to mark from top five centimeter
and from bottom five centimeter from this and two centimeter, two centimeters from here. Now, let's join all
the points like this. Five centimeter by
five centimeter. Simply join pliant, draw
a line to centimeters. This can be very rare because we are just going to use
this as a template. Once this is done, we can cut out this
area like this. I will use my paper cutter. Hold it like this. Got it very slowly. This is a very simple
cardboard template which will help us
to make very easily. That's where we are making this. Without this, it will be written there because
to make this, once you've got this, you can gently
remove this piece. We don't want these two
cardboard pieces anymore. Now the next step is we're
going to use masking tape and hold these two pieces like this and tapered
at the two ends. Let's use masking tape to hold
these two ends like this. Gently. Put the
tape I don't dig. Just write it like this. Yeah, so the similar way, we will hold these two ends at D SOP and put masking tape. I don't dig. This way. We will get
something like a C, C-shape cardboard template. You will see in the
next video how we can use this and start winding.
4. Making The First Knot: In this video, let's
see how we can meet the basic knot
and begin with it. For that, I have
taken one end of the macro meter rope,
Kenema macro mineral. Sam, going to start
with this simple not going to form
a loop like this. And insert this end from the top and inserted to the loo
and titanate Blake's. In this way, we are going
to repeat two more knots. At this point. I'm going to make one more. Simply, make a simple naught, then tighten it like this. We have to make three
notes like this. You can see here, I have made one simple node first. Did that. I have repeated that
two more times. At the end it will
look like this. So this will act as a
supporting form for now, we have created a
supporting form for a toy. In the next video, we
will see how we can use the C mode and start winding it.
5. Winding The Spherical Shape: In this video, we're going
to see how we can use this cardboard template and this not a droop and wind it across. For that. The first step is, I'm going to place this not on the center of the template,
cardboard template. And if you'll see here, it is exactly a dissenter of the C-shaped cardboard template. Now I'm going to use a
masking tape to tape this, this cardboard like this. And I'm going to mark it as that is indicating
and starting point. Now what I'm going to do
is I'm going to gently wind this across
the sea template. Make this four times. So this is 123. And finally four.
If you see here, you can see 12341234, both the top and the bottom. Now, what I'm going
to do is that is created after
we find the group. So I'm going to push this
not insane like this. Once I complete that. You can see how it
looks from this view. There's exactly a descender
and in-between the ropes. Now we are done with
the vertical binding. Before I start to the
horizontal winding, I'm just going to place
a masking tape roughly. We can remove this later on. Like this, indicating
that we have completed four times in this, if you see from top and bottom. Therefore, in this similarly, we are going to wind up the rope and on the horizontal direction, if you'll see here
that is one slot here and that is
one gap over here. And in-between ropes or
winded and there is a nod. So decentered. Now I am going to take
this row and slowly go winding and
inserted to this slot. Now you can see how it is
forming a loop like this. Now I'm going to repeat
it one more time. You can see here how
I'm stacking it. So this is the first time wine. And I'm going to place this
rope second one over the first and take all the all around the vertical
direction groups. The end. I'm inserting
through this law. And slowly you can see how
it is going here and there. But we have to do
it very slowly. You have to hold it and
pull it very slowly. Now you can see how we have made one more winding over here. If you see 12, we say, since the similar
way as we discussed, we are going to do four times now we have
completed two times. Let's do two more times. Hold the end, take
this rope all around. The winded vertical ropes. Insert it from this
end and slowly. Now you can see how
I'm stacking it. This is the fourth time, last, final most very
slowly did from this. And then later. Now if you see it
is already nicely. Now we have completed four
times from this data and 1234. And if you see here 1234, now this is the right time
to change the direction. Now we will see how
it can be done. Before that. This is
saved in a little bit. So to avoid from removing
it from the template, I'm going to place clips on it. Now let's see what
is the next step. If you notice here, we have formed a
cross shaped winding. This is first we did a
vertical direction winding. Then we have the rope and
winded out on D naught, placing it in the center. And it is like the
horizontal direction, which is centered in two holds
like this, this and this. Now the next step is going to insert this rope from this loop. Bottom, right? We have this whole, the other side also. You can see here 12. What we're going to do
is we're going to take our group end from the top hold. Take it out like this. Can do it very slowly
because we want a very clean and start the rule. Now, what I'm going
to do is I'm going to insert this and to the bottom, hold this from here. And I'm going to pull
it from the other end. So I am going to
insert it like this. And then slowly this V, we can repeat it. 143 more time because as
we already discussed, we need four times eight. So I'm going to insert it
from this whole like this, and then exit from
this other whole. Then pull it very slowly. Because we need a very neat
and clean stat to rope. I just checked bullet. And then again
insert it from this, hold, an exit like this. Then wind it all around D. Now I'm going to
insert it like this exit. Then again, we are going to
insert it from the bottom. Now if you see we have, we are doing for the third time. Inserted From this end. Slowly. Exit. Be a little
difficult to hear, can maintain the stacking
very neatly like the other. Now this is the fourth
and final most. I'm going to just insert
it here, the loop. Let's remove it ready carefully. Release it from the mold. When you remove this slowly
lifting this masking tape. Then along with that
tape we have to remove. Now this is the end. Now if you see we have
four winding completed, so this is the last
and exit thing. Now to hold this, we can place two
clips like this. We have completed binding. If you see here, there are
four groups and four here, four over here, and
all the directions, we have four ropes. So now we have very neatly. Now let's see how we can
tighten this entire rope. Then complete the next video.
6. Tightening The Spherical Ball: In this video, let's see how
we can tighten this rule and form a spherical
shape. For that. Before starting it, we have
to remove this masking tape. This is just for the
reference we have used. So we just tape to make
the process easier. Now if you see we have
marked a masking tape saying this is the
starting, starting point. I'm going to keep
this for reference. And then I will
tighten it starting. I will push it from here. And we have made a
naughty boy here rate. So that's the starting
point. So this is done. What I'm going to
do is I'm going to slowly follow this rope. This loop is going here. This is a rope. This you'll understand once you tighten it. So now you'll notice I
pulled this is getting tightened this week when you're doing it for
the first time. In it like this. I'm going to follow this
rope now from here, if you can notice here how
it is getting tightened. Now I'll follow this
rope like this. This is the this group. Then you start doing it. You will understand how, what is touching and how
to hold the next row. So when you do this process
to it very slowly and concentrate as much as you
can and follow the rule. Because this is little tricky. This is a very
readily tricky part in this entire project. Now I'm following this venule, miss this follow-up again. You can refer to the start point and do it from the beginning. So I'm just going to
follow this again. Now you can see how
neatly this forming our old loose ropes
are now gone. Now, in this way, we can tighten all the rope and then we can
extend this point. Now you can see how this, now I'm going to follow this. This is going from here to here. Now I'm following this rule. Then. From this, when
you start doing it, you will only
understand which one to pull and which ones do not. And it will, it is
a very easy trick. Menu must be starting point, you will never get missed. This is the rope. So the one EC triggers a few, few, pull this loop. This will get reduced rate. So if you hold a
wrong rope like this, you can't actually pull it. You have to follow this rope and where it is ending and starting. So I'm pulling this
from this end. It is a very continuous process. You will never get mixed up. If you're doing it first-time, give it a try 12 times, you will only understand. It is a very simple process. Meditating also
slowly like this, you have to tighten the
entire winding. We have done. Now, we have completed
the second side also. This is the final say
we're going to start with. It's very simple and
it does read easy. I'm going to make this. Then this slope is from here. We're going to follow the snake. And this is the starting point, then this will be the end. Now, It's make this. Then. From here one more trick you can do is you can
just insert this, push it like this, so that you will understand
their recent motion here. And you can understand
all that's the rope to pull tighten it. This is the final
rule most, I guess. Finally, we have used
clips to hold this rate. So I think that's the most one. Now we can remove
this stack point, a masking tape as well. You'll see we have everything. This shape is very nice. Complicit from all
the directions. If you want, just to
give a good shape. We have not used any ball or
a marble inside this ball, a spherical ball to give the
supporting form we have just used the same group
noted to make this. It looks very pretty
and it's very nice. We have come to this
end of this project. Now. In the next video, let's see how we can
make a loop over here to hold and
play with your pets.
7. Finishing With The Final Loop Knot: In this video, let's
see how we can complete this and making a loop over here and finish it
using this 31 macro me. So for that, what
I'm going to do is I'm going to fold this, take this forming
a loop like this, and then I'm going to
do this rope around this times one to the next. I'm going to insert this, this form, the Lupo here. You can see here that I'm going to slowly insert this end. This. Now you can see forming a
nice clean not in this. Now we have two patent for that. We have to hold this and this end and then
stretch it nicely. If you hold it this, we can adjust the loop. This I'm going to hold
this end and the same. Then I denote as much soup
can and as much as you want. Once this is done. We can slowly finish this
end by using this code. For that. You don't need this end. You can cut it a little bit. So I'm going to
cut it from this. We can cut it. We're going to use this DMM
macro mid quarter. This process. What
we are going to do is we're going to wind this across and then finish it. For that, you have to
hold this like this, the top with one end and
form a loop like this. Hold it like this. This is the point
where we are going to start winding till here. I'm going to hold this, then slowly winded this rope. It will be difficult
for one or two. Then it will be very easy because you will
have a grip over. Slowly. Hold it. And why this. See how simple and easy it is. Once you reach this end,
you'll complete that. Trim the ropes. They exist this end. You have to insert it. This loop which we formed
in the earlier stage. I'm going to insert
it like this. The next step is we
have to hold this end, which we left the
top bullet inside. You can notice how the loop is catching this
end and going inside. So before doing that and I look at a little bit,
we'll let inside. When you pull, you can notice how the loop is
catching the end. Now it is municipal. Now you can see how neatly
the end maintenance site, the next step is
we have duplicate this end like this and the exit. So you can just
using the scissor and you can just
get inserted links slightly, we can adjust it. Now. You can see how a very clean
loop is safe for us to hold. And then let is a
nice pedicle board that a clean finished loop end.
8. Conclusion: Thank you for joining
me in this class. I hope you have learned
something new, kindly shared. What do you have greeted
in the project section? And let me know what you thought about the class in the reviews. Good, bad, and cheers.
Cloudia David, Co-Founder | Entrepreneur | Designer
