Draw Your Own Buildings with Ease!

1. Overview: Hey everyone, I might do that. A man God is manga at a university in Kyoto, Japan. In this video, I will explain. I erase. Great Francois, respectable and adjust line. Among the many other features of peep Studio Paint. And use them to draw a simple building like this. Eraser is a helpful tool that allows you to raise line without having to do any detailed work. Free transform is a function that allows you to transform as a line drawing 3D perspective. We write that great digital camera that makes it easy to draw perspective lines without using a real rural. And I just lying is a function that allows you to picking or thin aligned at anytime afterwards. Why does the perspective lines anyway? This is the first time you've heard of it. No program. In this video, you will be simple building using a two point perspective. Don't need to know anything about perspective. All you need is Clip Studio Paint and digital drawing environment, such as an iPad or PC. Know, I had an outage or scales of any kind are required. If you watch this video all the way through and follow my instructions, You will have a better understanding of how to use the useful features of the pain. Able to depict a simple building. However, if you are new to keep steady pain, I suggest you first watch my previous video to get a basic understanding of how to use it before watching this video. And if you find it difficult to draw from a blank sheet of paper. At the project and resources tab. There are several resources available. User ones, you need to complete your building. Okay, let's get started. 2. What are Raster and Vector Layers?: This video explains the difference between Raster and Vector Layers. If you prefer to practice first, skip this video and what's the next one, okay. First, place the cursor on this icon thing, you will see raster layer here. This is a button for creating a Raster. You probably already have a raster layer on neural layer window. Try placing the cursor on the icon here. It will say Vector Layers. So this is a button for creating a Vector Layers. Tap this new vector layer has been created. The difference between a Vector Layer and raster layer is here. This small icon indicates that this layer is Vector Layer. There are two major differences between vector and raster layers. The first one, I draw a square on V6 or the night, draw the same figure on Raster a year. The two squares look the same. Now I zoom in on the two squares. Can you see that difference? The square on the left is drawn on the raster layer. The right one is on the Vector Layer. The rest of them has blurred outlines. Why is a vector one remains sharp. Why does this happen? Lines drawn on a raster layer I expressed by carrying each extremely tiny square called a pixel. This is why the image becomes rough when it is enlarged. Vector Layers, on the other hand, they're not paying pixels, but rather like this. Red square and red line. A vector layer contains the information, shows a width of the specified Excel from this red line in black. Therefore, lines drawn on a Vector Layer, we have not been distorted no matter how much they are enlarged. This is the first feature and thicken on each of the vector and raster layers, draw a Thymine R-square again. Next, draw a straight line through the square. Draw a straight line on the raster layer. In the same way, the eraser and erase this area. The Eraser tool only erases the area raft with the pen. You can rub up all the unwanted areas with the Eraser. But as you know, these edges are quite difficult to have to do it very carefully. It is better to enlarge it a little. But even if you look carefully, it is quite difficult to erase accurately. As you may erase too much or not enough like this with the Vector Layers, this erasing processes. But anyway, easy. Philip, the Vector Layer and hold the Eraser. That makes sure that this section vector Eraser is checked. First tab, this icon erase touched areas. In this case, only the part rubbed out with the eraser, we would disappear. It is the same as before. Next, that the middle icon erase up to intersection. Then the line you want to erase. And guess what? It's gone. Just a little touch and unwanted line is gone in an instant. In other words, on a Vector Layer with this middle icon active, the lines up to the intersection of the lines disappear in an instant. Isn't that great? This is the most useful feature of the Vector. One day for you. This is a tip for using the Vector Eraser. When you want to draw a line just inside this square, is better not to try to draw a line just inside the square, but to draw a long overhanging Line. Two reasons for this. Firstly, it is difficult to find the right petition to put the pin down when trying to draw a line exactly within the frame is very annoying and a waste of time, especially when you need many lines. And if you go over a short distance, it is harder to erase it. I was showing you the overhangs at the top and bottom. I want to erase these. It is easy to put the pen down on the large overhangs at the bottom. But it's difficult to do that precisely on the top. Slightly overhanging part. Ndc. It doesn't disappear. Trees again, this time a little deeper. It's gone. Let me explain why. If you select an object and tap on it, a red line will appear. This is a line that represents the Vector information. And erase the space between the red square and this point with the Eraser, This line will disappear. In other words, earlier I touched the areas slightly above this square. That's why is a line did not disappear. Let me try it out. Ready? See. If you touch here, it doesn't disappear. But if you touch a little bit lower, you see you only need to touch between the red square and the intersection. So you can touch further down when it bites into the line and erase it without programs. To make this easier, I told you to draw a long or the hanging line. Okay? In the next video, you will draw a Simple Building using the Vector Layer function 3. Draw a Simple Building: Now, first step, decide new. You can select any paper size, but the time being, please select before and tap. Okay. Next, disciple, new victory. A new vector layer has been created. You see the Vector Layer icon. Now tap on layer one to activate the pencil from the toolbar. Then tap the side chains layer color. A new blue layer colorbar with them appear in the layer properties. This means that all lines drawn on this layer will be displayed in blue. It will be somewhat confusing. So I will show you, let's draw it in black. The last one is blue. Even though it was drawn in black. The same things happens if you draw it in another color. But if you tap this button again, the original cost displayed. In other words, this is another button for drawing blue lines, but a button that displays lines in blue, no matter what color you have drawn them. Okay. Next, briefly depict the image of the building you are going to draw. Then depict the windows briefly. Assuming it is a war with four windows. Erase the unnecessary lines. Let's say that the wall on the right also has four windows. Again, erase the unnecessary lines. Next. Determine the ratio between the windows and the wall. You can use what ever ratio you like. But in this case, I would do this based on the width of the window frame. Determine the right wall in the same way. Next, determine the vertical ratio in the same way. Then top view and greet. Count how many frames you need to depict on this grid according to the ratios you have just, oh, I wrote ten, but a quick horizontal is enabling frames. Vertical is time-frames. The size of these frames can easily be changed. To change it. View, tap Settings. The number of division is the number was small squares in bold frame contains a number of small squares. By changing this number. In this case, let's set it to five. I've added that gap. This number. You can change to make the frame bigger or smaller. Adjust it to be the size you need it to be. This looks about right. So app, okay. Right, the same values as above. And draw a rough drawing of the wall frame and windows. Next, aesthetic layer two ended be the wall. First, thetic, the shape tool, and then the rectangle to the brush size to 0.5 mm. Change the color to black. After drawing the wall frame. Create a new vector layer. Draw the window frame on this layer. Then draw lines inside the window frame. Next, switch to the straight line to set the brush size to 0.5 mm. Depict the vertical frame. Draw a vertical line from the middle grid line to adjust halfway outsides ask, we're like this The keyboard shortcut for drawing a vertical line is Shift Y. Holding down the Shift key, you can only draw a vertical line at 45 degrees line and horizontal line like this. Next, draw a line on the opposite side, halfway of the frame as well. You only need to draw inside the inner frame to make it easier to utilize. Vector Eraser feature. Draw a line from further outside, the outer frame to the outside, then draw a horizontal frame. Similarly, draw a line half above, half below. Draw two more lines in the same way. Next, the Eraser, make sure that the Vector Layer is checked. And the erase app do intersection button is active. Change the brush size to a suitable size. If it is too large, it will be difficult to erase like me. Ok. Now erase the unwanted areas. Simply touch the unwanted area. Ended, the line will disappear. Now you have one window frame. Next. Duplicate this, that the selection tool and select rectangular selection. Then create a selection around window frame. Copy and paste from the icons below. By tapping three times. Three copies are being made outside the selection. To deselect it. Next, select the move to activate the moon layer at the top of the Habitudes palette, then moves a window frames to as a ride. There's a bottom right and to the bottom. First, activate the top lay here and moves the window frame to the right. Next up, debate the layer below it, and moves the window frame to the bottom, right. Similarly, activate another layer below it and moves a window frame to the bottom. Now, there are four window frames. Merge these these four layers by tapping to the right of the icon. Then place the cursor on the layer and right-click on an iPad, press and hold on a Mac, the truck back with two fingers or hold down the Control key. Okay, this menu, tap, Merge selected layers. Oops, I forgot to select the wall frame. It lower wall frame layer. Right? Click again and tap, Merge Selected Layers. Next, thymic selection to tap the rectangular selection in it and thick the wall. You have just drawn that copy and paste three times from the icon that appears below to increase the number of layers. Two for two of these will be used in the next video. Create the left wall, tap, Edit and Transform, then tap Free Transform. Now we see some squares on frame design education that you can transform it. Drag this corner square to transform it freely. Align the four corners with a blue raft drawing. Once you have transform the selection, okay? Or double-tap inside the selection to complete the Free Transform. Then tap outside of the selection to erase the selection. Next, use this layer to create a right wall surface. The process is same as before. The entire wall with a rectangular selection tool. I did Transform and tap Free Transform, drag the corner squares to transform them, to match them. Blue rough drawing. If it is difficult to align with left wall, enlarge and work carefully when you have completed the transformation. Okay? Or double-tap inside the selection. Then tap outside the selection to release the selection. The blue rough drawing is no longer needed. So tap the icon to hide it. Then names Layers so that you know what is depicted on which layer. Rename each one as right wall. Left wall. The Greekness also no longer needed. So erase it by tapping view and grid. Now you have completed Simple Building. In the next video, you will practice using this fire to draw a slightly more complex Building. Don't forget to save it, okay? 4. Make Your Own Wall: Now opened a Simple Building Fire created in the previous video. Name's Aliyah that have not yet been named. Name one as left wall, the end, the other us right will be tap. Tap here to create a new raster layer. Then tap, change layer color. You then tap grid. Then select pencil and simply depict the area you want to extrude. The edge of the war is to be extrude as a pillar. Do the same for the other side. Thing extrude the top edge as an IV. The thickness here should be half the thickness of the board with lines. Now that the approximate position has been determined, we can start inking the left Warby layer. Raster it line to end, depict a line. First, depict the eaves line, then the left pillar line, then the right pillar line. And erase the unwanted parts with the Vector Eraser that change the layer color. This is distinguished from the black line on the wall drawn in the previous video. You created the selection with selection to in the previous video. But this time I was show you another way. Just tap Edit, Transform and Free Transform. Selection has been created without using the selection to. Can you see a difference between this and a method in the previous video? With the selection to, you can freely create a selection. Whereas with this method, the line itself becomes a FedEx truck. There's not much difference in the result either way. So use which ever you are more comfortable with. Drag the ball, then drag the square to transform it. You have changed the layer color, so it's easy to distinguish it from the original black crime, isn't it? When the transformation is complete, you don't have to tap outside the selection, so this may be easier. Next, draw the right wall layer to an Create Layer three for the right Wall. Switch to the pencil tool again and draw the area you want to inset or intent. We inset this area. Select the layer for the right wall, the end inking. Do the straight line to depict the IV. Then the vertical lines. Before erase the unwanted lines with vector Eraser. Change the layer color and tap at Transform, Free Transform. Move the entire wall and drag Esquire to align it with the original Wall. When the transformation is complete. Hide Layer three, the left wall layer. In the right wall layer, the green is no longer needed. So top view and greet to hide the grid, you now have a wall with the physician to be extrude and inset depict it. In the next video, we will extrude the wall using the Perspective Ruler 5. Draw with the Perspective Ruler: Often the fire you made in the previous video, I explain how to make a Perspective Ruler along the wall surface in this video. Now, the rural tool and select Perspective Ruler. Make sure that this is said to add vanishing point and change Perspective type is checked. A little. First of all, this building has been drawn using the two-point perspective method. It is difficult for readiness to understand the Perspective. So for now, just remember that there are two vanishing points. Ok? Now, First Years War to create a left vanishing point at the top of the building. Your preferred position on that line and drag it slightly to the left. Aligned now appears. This is a line for creating the Perspective Ruler. Draw the line a little further down. You will see that you can freely change the angle of the line, adjust the angle of the line in this way, and overlap it with a line at the top of the building. It is easier to adjust it if you drag it as far away from where you first tapped, in this case, to the left. When this red line has being overlapped by the line at the top of the building. Moves a pen away from the screen. Next, use the same along the bottom edge line of the Wall. First, tap any point on the line and drag it to the left. Drag the real line up and down. When it overlaps with a line at the bottom of the building, moves a pen away from the screen. You have now created the left vanishing point. The blue line in the middle is a horizontal line. It is also called the eye level. Next, use a right wall to create the right vanishing point. As before. Tap any point on the line at the top edge of the building and drag it to his right. Then move this real line up and down to align it with the edge line of that building. Once aligned, lift as a pen away from the screen. Tap any point on the line at the bottom edge of the wall and drag it to the right. That was a rural line up or down to align it with a building line. Here is an important thing to remember. As you moves a real line up and down, do you notice that the rural Line is pooled and locked in place at a certain angle. Here it is. Even if they're rural Line is fixed, this will move. If you moves a ping further. However, it should not be moved from its fixed the petition, except in special cases. I told you earlier when I created the left vanishing point, that you should align the rural line with the bottom line of the building. But in the case of this right wall, you should not do that because a position where the line is fixed is the correct position. But first, I will actually do it and show you what happens in this line with building line as V or a horizontal line as being created. But look, can you see that this line is not horizontal? Why is it not horizontal? To begin with? This building was very simply depicted. At first glance. There seems to be nothing wrong with this drawing. But in fact, the vanishing point is not in the correct position. In other words, the horizon is asked you, as you can see, which means a picture looks like when the camera is tilted or your faces, do you think it doesn't matter if the horizon is slightly asked you? Let me explain a little more. If the horizon line is tilted than the vertical line we debited to depict the picture as it is. The vertical line will also be slammed. That will make a strange picture. This is why I said, Don do that. Now, let's go back and redo it Tap the undo button or press control plus D. Now we're going to re-create the right vanishing point. Again. The line above can be the same as before. Tap anywhere on the line and drag to the right, then moves or rural line up or down to align it correctly. Next is a button line. Tap anywhere on the line, drag to the right and moves a pen up or down. Then there's a place where the line is puede and fixed. Can you see it? This is a correct position of the vanishing point. And this is what Clip Studio is hitting you. Lift the pen away. Now, unlike before, the horizontal line is horizontal. What about the vertical lines? Now, they are correctly vertical. You see? You now have correct perspective, rural. Let's zoom out a little. This is a Perspective Ruler of holds a two-point perspective. They are hard to see, so I will make it a lighter color via preferences interface. Then like color in okay. The intersection of two lines created from the left wall and the intersection of the two lines created from the right wall. These two points of vanishing points. And because they are two vanishing points, it is called two-point perspective. There are also one-point perspective and three-point perspective. But I will not explain them here because you don't need them in this video. This is a horizontal line, and this is a vertical line. These are all real lines, so no lines are actually depicted in this screen. The next step is to crack the right wall. We have seen that the right wall depicted in the previous video is not in the correct perspective. Maybe around Free Transform the right wall to correct the Perspective. First, I want to deform the right wall. So select the right wall, the layer, then tap Edit, Transform, Free Transform. A frame for Free Transform has been created. Drag the bottom right square downwards to stretch the entire right wall vertically. A little. Carefree, stretch it down a little bit and align it exactly with the line of the Perspective Ruler. Next, extended the top line upwards, the lightly drag the top right square three top. You have aligned with the lines of the Perspective rural tap, okay, or double-tap inside the selection to confirm the Free Transform. Now, you have a quick drawing of the building according to the Perspective. Next, please check one thing. Thetic the Perspective rurally and tap this icon. At the top is showing all Layers ticked, if not, check off here. For those who have never used a perspective of rural before. Here are a few explanations. The layer with the right wall be, then select the fence, so feel free to draw anywhere you like. From the bottom right to the top left. You see that you can only draw lines in a certain direction. These are all lines that go to or extend from the vanishing point. On the right. The right vanishing point was created from the right wall. So these are lines parallel to the right wall. Next, draw some lines freely from the bottom left, top right. Again, you can only draw lines in a certain direction. These are lines towards or extending from the left vanishing point. And it seems the left vanishing point was created from the left wall. These lines are parallel to the left wall. Okay. These are lines on the ground. Also on the vertical plane. These are lines on the same plane as the left wall. If you are new to the Perspective Ruler, you may not understand what I am talking about, but you don't need to know the theory to draw buildings. More importantly, just draw it. Okay. These lines are no longer needed. So press the Delete key, the undo button or hit the Control plus DQ squared times to erase them. You see that only lines towards the vanishing point and vertical lines can be drawn under the inference over the Perspective rural. White. If you want to draw a line that have nothing to do with the Perspective Ruler, such as curves or characters that this icon to switch it off. You can then draw a free form curves like this. If you are a depict a line along the Perspective Ruler. Again. Tap this icon again to switch it on. Okay, in the following video, you will practice using these Perspective Ruler. Extrude a Wall 6. Extrude the Wall: In this video, I explained about extruding certain parts of a wall. That the right wall, the layer, then tap the new vector layer. You see the Vector Layer symbol here. Let me explain what we're gonna do. You just have a look. I was sitting to a pen. Then tap this icon to draw lines have nothing to do with perspective of rural. It is now off and change the color of the layer to make it easier to distinguish. Extrude these three areas, displaying, displaying, and display. The direction of extrusion needs this way. The lines I've just drawn are not needed. So I would delete them. Have this icon again to switch on to Ruler. Now, before we start drawing, I'd like to explain one problem that occurs because of the excellence of Clip Studio Paint. It sometimes happens when you are drawing with the pen tool such as Japan or Medicare without Ruler and turn on. You want to draw a line along the Perspective Ruler to the top left, like this. But sometimes the line is drawn in a direction you don't intend. Like this. This is a problem that happens because Clip Studio is so good. Why does this happen? It was a pen touches the screen perpendicularly. Nothing goes wrong. But we are human and new sometimes touch it just a little bit at an angle. Then Clip Studio decides that it should depict a line in that direction. So in this case, draw a line going do is a top-left. But because you may touch with that screen just a little bit, upward. Clip Studio things. Okay, you want to draw a line straight up and start drawing a line straight up. Once this happens, no matter how much you pull the pen to the left, you can only draw a straight line upwards. This isn't pleasant. The primary solution needs to cut the pen perpendicular to it. But sometimes this is difficult. In that case. My recommendation is this. Use a straight line to, instead of the pen tool. With our straight line tool, it is easy to change a line drawn to the top left into a line straight up and vice versa. As shown here. In this video, I first depict the eaves extrusion using the pen tool and then the column extrude using the straight line to you can draw the line the same way with either to use whichever tool you are more comfortable with. Now is take the pen tool first, extrude the IV. Draw lines from the four corners of the extruded surface in the direction of the extrusion. First, draw a line from the top right corner to the top left. In the same way, draw lines from the other three corners. The next step is to decide how thick to extrude. Make it about this much. Draw a vertical line here. Then draw a line from this intersection to the bottom left. The line seems to be a little off. So tap the Undo button and start over. Zoom-in a little more to draw a precise line. This time, the line is drawn correctly. Next, draw a line at the top of the IV. Draw a line down to the left from where it intersects the vertical line. Then draw the vertical lines at these intersections, then erase the overhanging on what it lines. The Eraser is a vector Eraser ticked that makes sure that the button erase up to intersection is switched on. Erase the unwanted pods. Oops, there are a few areas leftover. Zooming more to make sure you erase it correctly. This is because, as explained in the previous video, the petition where you used the Eraser was slightly away from the intersection. Erase anterior bytes into the line a little bit. Okay, Now it's gone completely. Next, erase this line. This is a line on the left wall which should be hidden by the IV and not visible. This was drawing the left wall bi layer selected. Okay. Now the IV is finished. I add few lines. Those who have difficulty understanding the shape of this IV, you just watch. What do you think? A little clearer now. Next, extrude the ends of the left wall as columns. The direction of extrusion is in the same direction as the extension of the right vanishing point. That is in the direction of these arrows. Select layer four on which you have just drawn the IV. Draw a line from the four corners of the column to be extruded in the same direction as before. The line extends from the right vanishing point. Straight line tool. If you are more comfortable with the pen tool, you can go straight to depicting it to draw the line accurately. Zooming a little. Is this icon switched on? If not happy, to switch on the Perspective Ruler. Draw the lines slightly down to the left so that they do not point towards left, vanishing point. Then draw an extrusion line from the top right corner. This the line is the same as the IV, so does not need to be drawn. Draw and an extrusion line from the top left corner. Next, extrude the column on the left, as it is a little far away, makes the line thinner. Change the brush size to 0.3 mm. Then draw lines for the column to be extruded from the four corners. Draw a line from the top right corner to the top left. The line in the top-left corner is the same line as the IV. So he does not needed to be drawn. Draw a line from the bottom right corner. Then draw a line from the bottom left corner. The next step is to determine how far to extrude this column. When I decided on the extruded thickness over the IV, I draw a vertical line, but a line towards the vanishing point is also possible. In this case, I will use that line. I want to extrude the left column by the same thickness. So draw a line all the way to the left column. Next is a vertical line. Fit the brush size back to 0.5 mm. Draw a vertical line from the intersection of the line, extending from the right corner and extrude it thickness. Drawing a large overhang downwards. Next, draw a line on the left side of the colon. Again. Draw a vertical line from the intersection. Draw a line from the intersection of the vertical line and the extrude the line. Next is a left column. Change the brush size to 0.3 mm and draw a vertical line from the upper right intersection. Then draw a vertical line down from the left intersection. And draw a line down the lower side of the column. Draw a line from the intersection of the vertical line and the extrude the line down to the bottom right. Next, erase the lines that are hidden by this column. Suites. Do the Eraser, ensure that vector Eraser ticked and erase up to intersection is on is also hidden and invisible lines, but these are on the left wall layer and will be erased later. The line is drawn in this layer will be erased first. Next, erase the lines hidden by the right column. It may be somewhat confusing, so I'll add few lines to the column section on the right. You watch this area is a right side of the column. And this is a left side of the column. Erase the lines that are hidden by these two columns. There are still some lines to be erased, but these are on the left wall. So erase the unwanted lines at the bottom moles or column first. Then check the layout on which the lines you want to erase our drone. Tap the icon on the left wall, be Layers. You now know that the lines to be Eraser on this layer. This layer, then erase the unwanted lines. Some of the lines have remained. These are probably the lines from when I draw the columns. So please aesthetic layer four and erase them. Oh, I forgot to erase another line. This is also a line on layer four. So erase it. There are a few left over erase lines. Erase them. As this is a detailed part. Please enlarge it a little and erase it. The left wall extrusion is now complete. In the next video, I will explain the right wall inset 7. Inset the Wall: In this video, I explained the right war inset. There are three areas to inset. Displaying, displaying, and display. Push. Each of these towards the left vanishing point. Okay, let's get started. If you're perspective Ruler is not displayed, displayed. The right wall, be Layers. Select the Pen tool and choose midi pan. Set the brush size to 0.5 mm. Now, inset from displaying. The inset method is the same as the extrude in the previous video. Draw a line from each of the four corners of the surface to the inset in the direction of the pushing. However, the lines extending from the two corners on the left are hidden by the wall and not be as if all. Therefore, in this case, you only need to draw the lines extending from the two corners on the right. Okay? Now, draw a line from the top right corner to the left, vanishing point down left direction. Then draw a line from the bottom-right corner to the left vanishing point. This time in the upper left direction. Next, set the thickness or depths of the inset. As with the extrusion, you can either use vertical lines or lines towards a vanishing point. I really used vertical lines this time to determine the thickness. Draw a line with a large overhang. Next, draw a line from this intersection. This is a line extending from the vanishing point on the right. Next, push in the middle plane. As this is a slightly distant surface, change the brush size to 0.4 mm. As before, draw a line from the top right corner in a down lift direction towards the left vanishing point. Then draw a line from the bottom right corner in an upward left direction towards the left vanishing point. Depict the rightmost inset as well. Has this surface is slightly more distant than the middle surface. Change the price size to 0.3 mm. As it before, draw a line from the bottom right corner, the left vanishing point. Then draw a line from the top right corner to the left vanishing point. As I want all three of these planes to have the same depths of inset. I extend the line normally inset thickness, drawing on the left plane or the way to the right side. Next, determine the depths to push in on the lower part. The way to draw this is the same as before. First, draw a line from the intersection on the left plane towards the bottom left. Then draw this same line towards the vanishing point on the right that is upwards to the right. You have now determined the depths of the lower inset. Then draw a line for the depths of the middle plane to be pushed. Team. Draw a vertical line from this intersection. Change the price size to 0.3 mm. Then draw a line from this intersection of the right plane. Next, I erase the unnecessary lines that are sticking out. But before I do that, I add some lines to make it clearer for those who find the inset playing a little confusing. First of all, surface is also the upper part of that pushed in space. The underside of the IV. This surface is right wall of that pushed in space. And this services are pushed in war itself. I add lines to the middle surface in the same way. This is upper surface of the pushed in area, the underside of the IV. This is a right or the pristine space? Here is that pushed in wall itself? And on the right plane, here is the upper surface that I pushed him, right wall. And here is a war itself that I pristine. They just see how the Wall was a push stain. Now switch to the eraser and erase the unwanted lines. The lines cross each other in a complicated way. Or think carefully before erasing, so you don't make a mistake. Next is a lower surface. This line was originally the right wall, which we pushed in. So we don't need dislike anymore. Next, the middle surface. This is also a complex surface. So think carefully about what kind of surface is. Erase only the unnecessary lines without making mistakes. This line was used to transfer the thickness of boosting wall to the middle and write pushed in wall. So this line should also be erased. There are lines that stick up a little. It is difficult to erase them accurately. So please zooming and moving Eraser is that it bites into them a little. There are also some lines on the left side that are sticking out, so please erase doors as well. Next is posting area on the right. They are also unnecessary lines here. Erase them. Thinking carefully about what the service looks like. Then move downwards. Erase the unwanted lines without making any mistakes. Next, move to the middle section. Again. Erase carefully to avoid mistakes. Finally, this is a line on the right war before it is pushed in. So erase it. Erase this line in the same way. The lying on the right wall overlaps the line on the left Wall. It's partially thicken. Lines overlapped when I made the right wall in the previous video. Delete these. Next, select the left VO, be Layers. Erase this area. A few lines remain. This looks like the right more bi layer selected and erase them. However, the line of the IV seems to be slightly separated from a lying of the right wall, be a vector. Eraser does not erase it. But I want to erase it. What should I do them? Have decided on the left, and you can erase only the part touched with the eraser. Just like using the eraser on the raster layer. If you look at the whole building, you can see that some of the lines are slightly thicker than others. The following video explains how to make these thick lines thinner. This is another great feature of the Vector Layers 8. Adjust Your Lines: In this video, I explained that correct Line tool. This tool works best on Vector Layer. But first I show you what happens when you use it on a raster layer. To make the change easier to see, I make the brush size thicker. I said it to 2 mm. Next, I swap to the correct Line Tool. Select, Adjust Line with. Then tap narrow, set the number to 0.1, then tap the line you have Adjust drawn, zooming in to see the change more clearly. See how the line gets thinner with each tab. You can see that only the inside of this circle is getting thinner. In other words, it is not smooth. This is a case with raster layer. They just see that it is not very effective. Then tap the undo button a few times to undo it. Next, tap this icon to create a new vector layer. This time again, I draw 2 mm straight line, then switch to the correct line, to the Adjust Line with and tap narrow as it before. The lying inside the circle gets thinner with each type. The same as in the case of the raster layer. But can you see we are asked earlier, only the inside of the circle was getting thinner. This time. Outside is also getting thinner. And you can see that it is smoother compared to before the undo button. This tool can also be used to trace a line and make the area thinner. The undo button. Next, try tapping on the scale down with this is a tool that makes the line thinner. A sudden magnification. I would say the number to 0.8, the line. And you will see that the line has become piano. Just as it before. You can see that the area you didn't tap is changing for mostly with this two. You can trace and Crick the line in the same way as before. Zoom out to see how the entire line has changed. You can see that the line has begun thinner smoothly. Now, let's try thicken. You can also correct by tracing, you can see that the line is getting thicker. In contrast to the previous one. You increase the number. The change is even grid. And do and try, scaled up with this time. Make the change more obvious, increase the number a little to, to 0.0, then it becomes thicker after just one tap, as shown here. As you can see, a too large number is too extreme and not very effective. Okay? In most cases, a number of 1.2 is recommended. Now, let's actually create the lines of the building we have just drawn. Okay. Opens a file you created in the previous video. Some of the lines such as the IV on a bit thick. So we will use the correct line to narrow these lines. Which layer the IV are drawn on? This is it. Tap this layer to select it. Next. A quick line to Adjust Line with a narrow. You can also choose scale down with choose whichever you prefer. Trace the line you want to make thinner. Again, to make it a little more thinner, aim to create a few more details. The brush size is too large. It would touch unwanted areas. So change it to an appropriate size Next, we will make the right part of the IV thinner. I want to create the details. So I enlarge it a little quick, like columns. Enlarge it a little. The lines over the IV and a right wall slightly miss alignments, but this will be corrected later. Next, we will create the lines on the right wall. Tap on the icon to see that you want. Have identified the right wall bi layer as the one you want. So select it and thin out the lines above. Zoom out to see the balance over the whole building. Next, quick, the amigo machine line, then correct, the rightmost machine line. Zooming a little to correct the lines below the lines above the IV and the right wall are slightly misaligned. So redraw these Lines. Display the Perspective rural. Find that a year on which the lines you want to correct our drawing layer for. Now it is not. What about the right wall? The lines have disappeared. So you can confirm this is a layer you want. Use a vector Eraser to erase the line you want to correct. Then draw a new line. I want the line to be as thick as the original line. So I draw and zero-point millimeters. It seems a little thin. So I try and 0.3 mm. This seems to be about the same thickness. Draw a line to carefully that the start of the line is not misalignment. Draw a longer line to the right. This is to depict the new wall on the right edge of a building. The line under the right wall should also be extended. However, change the brush size to 0.2 mm as 0.3 millimeter line is thicker than the original line. Then add a new line at the edge of the right wall with a vertical line. Then erase the unnecessary lines that are sticking out. The Perspective Ruler is no longer needed. So tap the icon to hide it. Erase a few more unwanted lines. Oops, this line cannot be erased. In this case, the layer selection is wrong. This line is drawn on layer four. So it was selected. Then erase it. There are still a few lines left over. These seem to be lines drawn on the right. Whoa, be layer selected and erase it. This does not seem to be the lay of the right ward. Be tap the icon to find that targeted layer. It does not appear to be layer fall. Neither is right ward be the left wall. The layer was the one. Select this layer and erase it. There is also an overhanging line on the left. Erase this layer ***** seems to be the target layer. So select it, then erase it. I found another overhang. This appears to be a line drawn on the right wall being layer selected and erase it. Okay, you are now finished types of file and save it in the right place with the right name. Then applause, your Simple Building to show everyone, even if you don't like the result. Because that's the fastest way to improve. Okay? 9. Conclusion: Thanks for watching my video. Isn't draw a convincing building. Whether you like it or not, upload it and show me. I would tell you what's good about your work and what could be improved. And if you like my video, please reveal it and tell me what you liked about it. In the way I can include. Helped me a lot to make my next video, can help people who are not sure if they should watch this video. Okay. The next thing?