Izana Kurokawa Inspired Earring / Tokyo Revengers Anime and Manga DIY

1. Intro: Hello and welcome to my class. In this class I'm going to show you how you can make these year-end. They were inspired by Tokyo rangers animate character is ulna and the cool season Kaposi's urine is that you can unclip it and you can make even this in different colors. So you can change it is, Let's start. 2. Supplies and Materials: For this dear, why you will need to screw I, pins for jump rings, magnetic clasps to ear hooks. And actually, it would be bad if you can find leatherback urine hooks, but I didn't have them at my local store. You also need two pieces of 10 cm long wooden rulers. If it's too long for you, you can cancer rulers to seven, 8 cm long. You will need some flyers, black, white, and red bands, and some paint brushes as well. 3. Painting / Izana's design: Now it's time to paint. The design is simple. You just need to draw a similar semicircle line. I decided to for handed. Biomaterial can use washi tape or any other round object to neural. A perfect line. If you also use the room as I, I would recommend it to send beforehand. That way you won't need to apply lots of layers of paint and say, I didn't do it unfair to apply about five layers over gorilla brand. Bad. Blake was still visible. So it's better to send it. Don't forget to apply a single layer of acrylic paint so it can easily dry and it can drive faster patiently before reapplying a new layer of paint. Don't forget to paint all the sites. This is unlike a small white circles. You can paint them white print or grossly. But I cheated a little bit and punched two circles with my hole puncher. I use the white sticky papers so it was easy to stick on the Earth. 4. Varnishing ideas (Optional): It's an optional step, but if you want to protect your urine, I would highly recommend to varnish it. You can use a nail polish, a varnish for acrylic paint, or epoxy resin. I decided to use a nail polish as it's easiest and the fastest option for me. 5. Varnishing #2: Epoxy resin (Optional): You can also protect your earrings using epoxy resin. Don't forget to cover your workplace. Usually when I order boxers and it always comes with all the necessary things like mixing sticks, measuring syringes, and gloves. You may also need to silicon brush, but makes sense take works perfectly as well. You also need a disposable, always silicon cup way you will mix resin. Be sure to follow the instructions for your epoxy resin as it may be different from mine. Wear gloves to protect your skin. You can also wear protective clothing because if you spill zeros and it's pretty sticky and you can damage your closing. If you're really sensitive to chemicals. So you should consider wear a respirator or a mask. Don't forget to open a window or be in a well ventilated place. Mixes the right proportion of resin and harden it according to the instructions. And be mindful of the amount of red. You need. Be sure to scrape the sides of your cup for equal mixing. You should also wait a few minutes to remove any air bubbles. Pour the resin on your earrings, and read it carefully. Let it cure for 24 h. 6. Attaching everything: Now let's create an IP is really easy to do as a word, it's not hard. It's pretty soft maybe because it's pretty scene. Zan You need to connect this pin visa magnetic class. You just need to use a jump ring and your pliers. After they adjust to take it to the hook. Repeat the same process recent as a uranium. 7. Final result: This is the final result. I really like it and actually went to decorate it a little bit more. So I'm going to show you eat in the project section. I would love to see your projects as well. Maybe you can come up with other ideas. I would love to see your earrings. Good luck.