Sorry, your browser is not supported
To have the best experience using Skillshare, we recommend that you use one of these supported browsers.

Michael Bennemann

bionic scientist

22

8

Turning 2D jpg images into 3D stl files for 3D printing using freeware

Hi Makers, in this class I will show you a method how to turn black and white jpg images into 3d stl files for 3D printing. For this method you only need free software. Once you have installed the software and designed your jpg images your stl file will be ready in about one minute. Below you can see a simple example of an stl file I designed using the method (beside from the example shown on the cover of the class):

afd39dab

Update 09.06.16:

Here is the link to my Video Lesson Outline:

https://docs.google.com/document/d/1sAqrCa4gHPO1G9yvgaok40Hcpbv4vOLtQUX4nivxTxQ/edit?usp=sharing

if you have ideas for improvement - please let me know.

Update 20.06.16:

Here is the link to my Introduction:

https://youtu.be/pto5LBD4za8

if you have ideas for improvement - please let me know.

Update 29.06.16:

Here is the link to my published class:

http://skl.sh/295OZHU

My class is free till end of july.

Comments

Please sign in or sign up to comment.