KathyAnne White

Using Digital Media with Fine Art

110

--

Metal Box—Digital Transfer

My metal box was created from scratch and a piece of 20 gauge steel so the box is light weight. I cut the top and bottom and then the sides. With a mig torch I welded the box together in a very loose way. I wanted it funky. My digital print was from a detail of a large abstract I painted. Cutting the transfer film as shown in the video I placed a piece of the print on each side. Using Gilders Paste whichi is also in the video —i added some silver to brighten the box.  Once finished I sprayed a coat of the spray varnish recommended:)

These are the pieces of steel I started with.

7dde17b1

Comments

Please sign in or sign up to comment.