Wire Post Earrings: Knotted Studs
Katrina Anderson, DIY wire jewelry and craft tutorials
Ve esta clase y miles más
Ve esta clase y miles más
Lecciones en esta clase
-
-
1.
Introduction
0:30
-
2.
Knot Studs
3:11
-
3.
Outtro
0:26
-
-
- --
- Nivel principiante
- Nivel intermedio
- Nivel avanzado
- Todos los niveles
Generado por la comunidad
El nivel se determina según la opinión de la mayoría de los estudiantes que han dejado reseñas en esta clase. La recomendación del profesor o de la profesora se muestra hasta que se recopilen al menos 5 reseñas de estudiantes.
1
Estudiante
--
Proyectos
Acerca de esta clase
Welcome back to another class! This is the second tutorial in the Wire Post Earrings series. Check out the other videos for more wire jewelry designs!
We will be learning how to
- tie a knot in wire
- create a post for a stud earring
- tighten a shape in the wire
- use different types of pliers
- file the cut end of wire
The tools you need:
- needle-nose pliers
- flat-nose pliers
- wire straighteners/plastic-coated pliers
- wire/flush cutters
- ruler
- file
- 20 gauge jewelry wire in the color of your choice. (gold, silver, copper, etc)
- plastic earring backs
In the Project & Resources section you can find an attachment where I have put together a list of all the supplies you need for this class! Once you click on the tab, you will find the file in your downloads.
If you enjoyed this class, you may find these classes helpful as well.
Remember to have fun, enjoy the process, and keep wrapping!
- Katrina
Conoce a tu profesor(a)
Hello! I'm Katrina Anderson, and I enjoy making wire jewelry and sharing that passion with others. I began Katirose Creates as a creative outlet for my jewelry making. I hope that it will be an inspiration to you as well!
I'm so thankful that God gave us the ability to be creative! I hope that you will discover as I have, the joy that comes when you use your creativity to bless and inspire others, and glorify God.
Thank you for being here and watching my classes! I trust that you will enjoy creating and learning as you follow along.
Ver perfil completoProyecto de clase práctica
Create a Knotted Stud
Work on tying the knot as near to the end of wire as possible. This way you don’t cut off a lot of wire scrap. If you do have a lot of excess wire to trim, you could use it to create another small design. Perhaps use it to create a small spiral stud!
Practice tightening the knot with the straighteners. You can push against the knot to tighten it, but I find it best to pull both ends of the wire at the same time.
Have fun with creating the knot. Bend the post so that the knots are mirrored or matching. You could also try tying the knots in opposite directions to create the mirrored look. Then when you create the post, you would bend the wire in the same direction on both studs.
Upload a photo of a knot tied in the wire.
Valoración de la clase
¿Por qué unirse a Skillshare?
Mira las galardonadas Skillshare Originals
Cada clase tiene lecciones cortas y proyectos prácticos
Tu membresía apoya a los profesores de Skillshare
Aprende desde cualquier lugar
Ve clases sobre la marcha con la aplicación de Skillshare. Progresa en línea o descarga las clases para verlas en el avión, el metro o donde sea que aprendas mejor.
