CAD Autodesk Inventor Basics: Beginner Crash Course | The Complete CAD Beginner’s Guide
Jordan Keech, Professional CAD Designer & Instructor
Ve esta clase y miles más
Ve esta clase y miles más
Lecciones en esta clase
-
-
1.
1.1 Introduction
2:40
-
2.
1.2 What can Autodesk Inventor be used for?
2:07
-
3.
2.1 What settings and hardware should you use?
7:01
-
4.
2.2 Inventor File Formats, File Organisation and Changing Units
8:43
-
5.
3.1 Workspaces and the Home Screen
5:08
-
6.
3.2 Camera Movement and the Model Browser
6:16
-
7.
4.1 Creating a Sketch and Basic Sketch Geometry
3:35
-
8.
4.2 Group Selecting
1:56
-
9.
4.3 More Sketch Creation Tools and Command Variations
3:37
-
10.
4.4 Fillets, Chamfers and the inserting Text boxes
4:08
-
11.
4.5 Nodes and Projecting Geometry explained
3:46
-
12.
4.6 Sketch Modification Commands
11:06
-
13.
4.7 Pattern Based Duplication
6:14
-
14.
5.1 Dimensional and Geometric Constraints
3:43
-
15.
5.2 The Dimension Command and Tips
7:03
-
16.
5.3 Geometric Constraint Tools
11:09
-
17.
5.4 Fully Defined Sketches
6:30
-
18.
5.5 Constraints Assignment
3:42
-
19.
6.1 Extruding and Revolving
4:49
-
20.
6.2 Further Create Tools
8:47
-
21.
6.3 Understanding Consumed Sketches
2:05
-
22.
6.4 Automatic Hole Command
5:21
-
23.
6.5 Modifying a 3D Model
9:15
-
24.
6.6 Quickly Editing with Direct Edit
7:03
-
25.
6.7 Pattern Driven Feature Duplication
9:54
-
26.
6.8 Creating Parts from a Drawing
30:08
-
27.
7.1 What's a Plane?
2:24
-
28.
7.2 Origin Planes
3:04
-
29.
7.3 Placing and Using Planes
8:22
-
30.
8.1 Placing Parts into an Assembly
4:24
-
31.
8.2 Assembly Constraint Commands
8:02
-
32.
8.3 Constraining Parts to Create an Assembly
9:56
-
33.
9.1 How to Open and Store a Drawing File
2:18
-
34.
9.2 Designing a drawing border (Follow Along)
24:39
-
35.
10.1 Placing and Stylizing a Base View
4:39
-
36.
10.2 Projecting Aligned Views and Setting out a Drawing
5:04
-
37.
10.3 Further Drawing Views (Section, Detail and Break)
8:29
-
38.
11.1 Dimension Tool
5:43
-
39.
11.2 Text Box Varieties and Drawing Symbols
3:06
-
40.
11.3 Sketching onto a Drawing
2:25
-
41.
11.4 Making a Drawing Package and Setting Out
22:12
-
42.
12.1 Piston Head Parts
27:05
-
43.
12.2 Piston Head Assembly
5:55
-
44.
12.3 Piston Connector Rod
20:19
-
45.
12.4 Crank Shaft
14:36
-
46.
12.5 Four Stroke Engine Assembly
5:50
-
-
- --
- Nivel principiante
- Nivel intermedio
- Nivel avanzado
- Todos los niveles
Generado por la comunidad
El nivel se determina según la opinión de la mayoría de los estudiantes que han dejado reseñas en esta clase. La recomendación del profesor o de la profesora se muestra hasta que se recopilen al menos 5 reseñas de estudiantes.
3
Estudiantes
--
Proyectos
Acerca de esta clase
This course has been designed to be the most comprehensive learning tool for any beginner to pick up and start learning not only all the basics within the Autodesk Inventor software but to also gain a grasp on a wide range of the tools you'll have at your disposal. On completion of the course you're certain to have a better understanding of what's possible with the programme resulting in yourself being an invaluable asset in the CAD / Engineering industry.
Throughout the course you will learn how to take a 2D sketch and turn that into a 3D model, from there you can take this 3D model and convert it into an engineering drawing that can be used by machinists in the real world.
The course focuses on the tools you can use and where you will be typically using them. Your learning throughout the duration of the course will be solidified through the designing of a workshop vice. At the end of the course you will have a 3D model of the workshop vice including all of the parts and drawings that make this up, and a personalisable drawing border of which you can use in your own professional career.
At the end of the course you can follow along modelling all the parts for an engine assembly. Undertaking this exercise provides an opportunity to apply all the knowledge you recently gained ensuring that you remember more of what you learn.
About this course:
Follow along with our expert instructor in this training course to get:
- 6.0+ hours of HD video tutorial
- Over 40 individual video lectures
- Multiple Assignments
- Full lifetime access
Conoce a tu profesor(a)
I have over 10 years of experience in CAD and have worked in the engineering industry my entire career. I began learning CAD at the age of 14 after taking a work experience placement at an architecture practice, where I discovered my passion for draughting and design. I've developed a deep understanding of how each CAD program works, as I have studied multiple CAD softwares since I was young. Because of this and my experience in the industry I can efficiently carry out work in the real world environment.
Throughout my career, I have trained many people on how to use these tools. Since most of this training was focused on getting colleagues up and running with the software as quickly as possible, I developed a method that gets my students started on drawing right away. We... Ver perfil completo
Proyecto de clase práctica
5.5 Assignment 1 - Download Constraint Worksheet.ipt
Using the constraint tools learn how to manipulate sketch geometry in relation with the constraint worksheet.
6.8 Assignment 2 - Download Vice PDF Drawings.zip
After learning the basics of Autodesk Inventor we will put your new tools to the test and create your own workshop vice model parts from a drawing. This helps commit what you've learned to memory while also giving valuable experience in learning to read engineering drawings.
8.3 Assignment 3 - Download Vice Parts.zip
Learn how to create a full assembly file either by using the workshop vice parts you made yourself or by using the my downloadable parts.
11.4 Assignment 4 - Download Vice PDF Drawings.zip
Using the Vice assembly you put together in the previous assignment create a drawing package with clear dimensioning.
Follow along with the video to see how I created the drawings.
12.1 - 12.5 Assignment 5 - Download Four Stroke PDFs.zip
Using the downloadable drawings files for 4 Stroke Engine parts create your very own 4 stroke engine from start to finish. Follow along as I show you how I make each of the parts.
Valoración de la clase
¿Por qué unirse a Skillshare?
Mira las galardonadas Skillshare Originals
Cada clase tiene lecciones cortas y proyectos prácticos
Tu membresía apoya a los profesores de Skillshare
Aprende desde cualquier lugar
Ve clases sobre la marcha con la aplicación de Skillshare. Progresa en línea o descarga las clases para verlas en el avión, el metro o donde sea que aprendas mejor.
Clases relacionadas
