How to Repair a Cracked Back Glass on Your Phone

To some people, their smartphone is like an extension of themselves. They take it everywhere and use it for everything from communication and entertainment to work and productivity. As fragile as phones can be, it's not uncommon to drop them, which unfortunately may lead to a cracked or shattered back glass. But what do you do if this happens to your phone? Here's a step-by-step guide to help you repair your phone's cracked back glass.phone back glass repair

Step 1: Gather Supplies

The first thing you need to do is to gather all the necessary supplies to ensure a successful repair. You will need:

A replacement back glass panel of the same size and model as your phone
A hairdryer or heat gun
A plastic pry tool or a credit card
A microfiber cloth
Adhesive glue or double-sided tape

Step 2: Remove the Broken Back Glass

Using a hairdryer or heat gun, soften the adhesive that's securing the cracked back glass to your phone. You can also place your phone in the sun for a few minutes to heat up the glass and loosen the adhesive. Once the adhesive is warm enough, use a plastic pry tool or a credit card to gently lift the broken glass off the phone. Be careful not to apply too much force that may cause damage to the phone's internal components.

Step 3: Clean the Phone

After removing the broken glass from your phone, clean the phone's back panel thoroughly with a microfiber cloth. Make sure you remove any adhesive residue or dust that might have accumulated on the back panel.

Step 4: Apply Adhesive

Apply a small amount of adhesive glue or double-sided tape to the back panel of your phone. Make sure you apply the adhesive in a proper pattern to ensure proper adhesion to the replacement back glass to be installed.

Step 5: Install the Replacement Back Glass

Carefully place the replacement back glass on the phone's back panel, making sure it's in the correct position. Press the glass gently using your fingers to ensure it sticks to the phone's back panel.

Step 6: Let the Adhesive Glue Dry

Allow the adhesive glue or double-sided tape to dry according to the manufacturer's instructions. In most cases, it takes between 20 minutes to an hour for the adhesive to set completely.

Once the adhesive is dry, your phone should be as good as new! Repairing a cracked back glass on your phone can be an easy DIY project when using the right tools and following the right procedures. If you're not confident in your ability to repair your phone, consider seeking professional repair help from a qualified service provider.

Marta Robles

--

--

Company

Community

Teaching

Mobile

Company

Community

Teaching