Transcripts
1. 1 Intro: Hey, the aircraft to France. My name is Diana and I'm
craft maker in the SG Ocean. Thank you for
entering this course. We hope you'll like it. Halloween is just
around the corner, and you know what it means, it's time to get spooky and creative and maybe
even make a profit. In this course, we're
going to show you six fantastic Halloween
crafts you can make with a cricket machine
to sell in 2020. The best part, you don't even need any specific
skills to get started, whether you're a
season crafter or just studying this project
are sure to be here, Graba Cricket, some materials
and let's get started. This course is divided
into six categories, where each video is
a crafting project. From the first
video to the last. The complexity of
the project will increase by saying that, I mean that you need to do a
couple of steps or layers, but you still don't need to have any
skills to repeat them. Cricket machine is very easy to use and it's accessible
for all skill levels. And I love that all you really have to do is to load the mat and
you're ready to cut. Most people think that
crafting is a fun hobby, but in fact, it's a very big
opportunity to make money. If you have a knack for crafting and you decided
to monetize them, this course is a good beginning. These crafts are a
great and easy way to start making money from
doing what you like.
2. Halloween Lollipop Holder: Our first II project, a Halloween back
lollipop holder. We select a folder and then select the
project that we need. These and other
projects comes in a single file with the
different file formats. See another folder.
Let's open it. Now we need to open a
folder called All formats. Always see folders with all the designs that are
presented in the bundle. Choose any design you like. I like the first one, I'll choose that one. Hold this visual file and
then drag it to the desktop. Our here. Let's open cricket design space and upload the file there. Now go to the upload tab
and then click Plod Image. Then select the SPG
file from your desktop. We see that the file is here, so let's now select it
and add to the canvas. Our design is loaded. Now we can change it. While working with this project, you may have difficulty
with the stick of the lollipop because the
size may be different. To change it, select a circle shape and
then resize the shape. Select the design in the shape, and then click Subtract. In this way, you will have a
circle of the required size. Now click Make It, and then select the size
of the material you need. Then you can cut your project a serial together your materials. Take one sheet of Cut
Stop for the Beats body and Wings cricket machine. Will use this to cut our
bad design and a glue, assemble our bet
lollipop holder. Let your cricket machine work its magic and cut
out the bet shape. Also, always check whether you circuit the mat into
the cricket correctly. It can take a little while it's starting to take shape. Carefully remove the
bad shape from the met. Don't forget to change your
blades from time to time. Actually, cricket has
no set recommendation. Cricket machine blades
need to be changed at different intervals based on the materials you use
for your machine. Most bad lollipop holder designs will have score lines to guide you folder on the score lines. Now the fun part
inside the lollipop. Just slide your chosen lollipop into the slot until it's secure. Apply glue to the bad's wings and attach them to the
sides of the body. Just glue these parts if you like, you can add any
other detail you prefer, and there you have it a day. Halloween bad lollipop holder
made with your cricket.
3. Halloween Invitation: Our next design is
Halloween Invitation. I have already opened it and now we can
make it more bigger. Here you can see that the
design has two options. You can use only the front part, or you can use just a
regular cut. Click on Group. Now we can remove the
design we don't need. Let's enlarge our design. And you can see the line
where the fold should be. Open Operation Panel. And then just click
the score option. Next, just attach our
line to the design. Our design is ready. Just click Make it. Please pay attention that this card
should be mirrored. Now, I can cut this as usual. Here's what you'll
need for this project. One sheet of cardstock. We'll use this as a base for our card cricket machine to cut out our God's design and scoring stylus. This stylus lets
your cricket machine to score four lines in cards, envelopes, boxes and move. I don't have one, so I just
send the cardstock in half, even using a ruler. Carefully unload the mat, pull your car stoking
to create the card, like pending the car
a little to the side. Always try something new with your crafts and
do what you like, then the process will
be even more fun. Your Halloween ghost
invitation card is now ready to be sell or sent out to
your friends and family. Open your card and write your Halloween party
details such as date, time, location, and so on. Is it in an envelope and you set to mail it out or
hand delivered it?
4. Halloween Card: Our next design is
a skeleton cut. Upload all six layers onto the canvas and recite
them if you need to. You can also layer
them together and see what the end result
of the craft will be. Now click Make It and select
the size of your material. Then cut out. As usual,
take card stock. We'll need different colors for our layers cricket machine
to cut out our designs. Glue or double sided adhesive
for assembling our layers. And of course it's optional, but you can add extra flare
with stickers or glitter. Attach another color of
cuts stock to the mat. I recommend using medium thickness card stock
for this project, but of course it's up to you. Now unload the mad. Take the red base
of our cart and the black layer slide
black cuts stock between these pieces. This small black part will serve as a place for
you to write the nodes, then start layering
attached cuts, stock together with the glue. Always assemble the
crop before going the layers and see if
everything is matches. Assemble all the layers
as shown in the video. Be careful not to apply too
much glue, just like I did. When you are done with this, you will have the top
part of our card. Take our red base again and
glue the top part together. Our bewitching
late Halloween pop a cut ready to send your
spookiest greetings. It's simple craft that doesn't require much effort
and looks cool.
5. Halloween Pop-Up Card: In this part, we're going
to make pop up card. As you can see here, we have three designs. Now let's remove it. In fact, this design below is just collected all the
components of this card. Click and group here. Now you need to
change the operation to these lines from
basic to score. Then fasten the
lines to the design. Just select the lines by itself. B and press attach. And the same you need
to do with the card. Now you can see that all of our lines is attached
to the designs. Hey crafts. Today we're creating another
Halloween pop up card. First F. Let's gather
the materials. I like the idea of popping
up card using craft form, so I will use it as
a main material. You can use any
other material you like like card stock
or something else. Also, of course, our cricket machine and glue or double sided adhesive for
assembling our layers. I personally used hot glue gun. You can also add
some extra stickers. If you're also decided
to make a crafting foam, it's good to know
that Cricket can cut craft form around 2.0
millimeters thick. Good machine defaults to using the deep point blade
for cutting foam. So I changed my blade. If you don't have this blade, just adjust the setting
to select knife blade. Also don't forget to move white star wheels all the
way to the right or left. Next, start cutting out
the card stock as usual. But don't forget to
change the blade. Gently remove cut
outs from the met. I also cut out the spiders. Now let's start attaching
the cutouts to the card. I use a hot glue gun for that. Here I decided to attach spiders like that so as to
create a shadow effect. I also want to add self, ah, sing wiggle eyes. As I said earlier, I don't have a stylus, so I made straight
lines using a ruler. Now glue the web, but do not attach the top
and the bottom sides. Blue. Some additional elements. More web here and fighters here. And now your car is ready
to share some spooky magic.
6. Halloween Egg Holder: Our next project is a Halloween egg holder in
the form of the which. Please know that you will
need to resize the design because the size of the
suites are always different. Just click here and group
and then edit the size. Then cut out each layer. But this project I use blue glitter cuts stock
as a main material. Cut your design with a cricket. Then remove cuts
stock from the mat. Remove the remaining cut
to pieces using ten tool, then start cut out other
details of the holder. I used white cut
stock for the ice, but also I add sticker. This green color is a bottom layer orange color for the witch's hair and shoes. Carefully remove the witch
pieces from the mat. As you can see, I chose
quite thick hot stock, so it's a little hard to remove. I also cut that piece for the part of the shoes. Also I cut this little parts
for the top of the holder. Then start assembling
the witch's body that is addressed to
the body using a glue. Now let's glue these details. I actually like to use
cricket tweezer syn crafts to accurately glue the desired part without unnecessary movements. Now let's add small details
to the witch's face. Add to work with the glue carefully so as not to
remove its remains. Now add two layers of
cuts stock for the shoes. Then glue the tiny details
to finish the witch's look. I also decided to glue on a pair of wiggle eye stickers to give our holders some charm. And fold the lower part
as shown in the video, and glue the other
side of the holder. Insert favored chocolate
egg and our craft is ready.
7. Happy Halloween Cut Out: Today we will make
our last craft in this course is
Halloween cut out. Now we can see all
the details of the design and the
finished design by itself. Let's remove these parts now. We can edit the
size of our design and change the color of the
cardstock if it's needed. Then select the settings of
the mat and start cut out. Choose the cut stock
of the color you like and start cutting
the first layer. This layer will be
the bottom one. Carefully remove this
layer from the met. You can make it easier
with a wedding tool. Then start cutting
out another layers. Arrange your cut layers
on top of the background. Following your design, use glue to secure each
layer in the place. Working from the bottom layer to the top 0, 0. Add another layer of
gut stock to the pukes. Do now thread. The Gods threw the
holes from the sand. Use a hot glue gun to
securely fix this stent, and our final craft is ready.
Svgocean, Cricut crafting classes for any level
