Transcripts
1. intoduction: Hello everyone. I met Sam
committee in this course. I'll teach you how to
use advanced scenes, which are these the best
plugin I see for OBS, but in the same time is the
most difficult for users. And I don't see until now any costs about it
because of that, I make this course, if you are a streamer
or podcaster, you can benefit from it. In this course, we learned
how to switch from scene to scene with
different methods. We'll learn how to be notified
when your mic is muted, how to start or stop
recording automatically, and many, many other things. If you are interesting
about this plugin, you can see our lessons. See you there.
2. Scene setting 01: Hello everyone. Today I want to show you how to switch from C1 to C2 and from CA3 to CA1. How we can do that? We go to Tools and advance. It seems to go from
general to macro. And click Plus.
Here, we name it, seen from scene one, scene 12, scene two. Okay? And go here, click
Plus choose seen here, and choose here, current seen. Select the scene that you
want to switch from it. And in our case, it's the scene one. Here, click Four, choose the time that you want
to switch after it. Click here, click for exactly. We want switch after
4 s or 20 s or 1 min. And go to here plus and
click Switch seen here, acidic, the scene that
you want to switch to it, in our case is seen too acidic. The transition, the
transition that you want, I select fade and go to General, and click start for C. The work. Here we are at
the scene to it not work. But when we choose
the scene one, it work, clicks in one. After 4 s, he switch. This is you see the transition. Okay, Now we want to switch
from Scene 32, scene two. Let's go back here. Macro. Let's go here and stop
this work and go macro, click Plus and name it
from scene to scene. To click here plus choose scene and
currency and keep it the same and select the scene that you want
to switch from it. And in our case,
it's seen three. Go here, choose for exactly
and choose 5 s. Go to here, click Plus and
select switch scene. And the scene that you
want to switch to it. In our case, it's seen to
select fade and go to General. And click Start. Here. Click C3 and see the work. 5 s. He switched to seem too. You see here click seen one. After 4 s he switched
to seem too. I hope this be useful
for you and you need to practice for see the result. See you in the next lesson.
3. Scene setting 02: Hello everyone. Today is the lesson tool. In previous lesson,
we learned how to switch from two
scenes to one scene. Today, we learned
how to switch from C1 to seem to go back
from scene to scene one. How we can do that? We go to Tools, click Advanced since we took and click macro and go to plus. Keep this the same and you can change the name
that you want. I keeping the same click, Okay? And here, click
Plus choose scene. Keep this the same currency, and select this currency now that you want
to switch from it. In our case, it's seen
one, connexon, one. Here. Choose the time that
you want to switch. After it. Here, click for exactly
I use for exactly. Usually, select 5 s. You can choose here,
seconds, minutes, hours. You can make what, what you want here
go to plus here, the action that you want
to do, switch scene. We want to switch C and select the scene that you
want to switch to it. In our case, it's seen two. And here you can see the the
transition that you want. I don't. And go to General
and see the work. Click Start. From seeing one. After 5 s, he switched to
seem too good, Good job. Now we want to switch
from scene to scene. Will go here and stop
this and go to macro. We need to create another macro. It's the same. You
can change the name. I keep it the same. Click, Okay. Click here, plus, keep
this scene the same, and keep the currency the same. Here you can choose from lose, but we select currency
and acidic the scene. The currency that is seen to choose here for exactly
the time that you want. Let's say 5 s. Let's
keep the same. And to be clear, the action plus switch scene and select the scene that
you want to switch to it. In our case, it's seen one. And keep all of this
the same hour or you can change the transition
that you want. Okay, go to General
and start the work and see the magic
of this plug-in. Okay, he switched to
scene one from seeing one after 5 s. He
switched to see into, and after seen to switch to
scene while we make our God, our goal, that is make
loop between C1 and C2. And you see, you don't need
to make this money yet. It's automatic. You focus to your work or
your stream or your podcast. I hope this be useful and
see you in the next lesson.
4. Scene setting 03: Hello everyone. In the previous lesson, we learned how to switch from
scene to scene to today. We learned how to switch from C1 to C2 after this video ended. Automatically. How
we can do this? Okay, Let's go to Tools, Advanced scenes, which are
this plugin, it's magic. Go to macro and click blast. You can change the name. I keep it the same.
Click Plus here. And go to Media. Select your clip by clip. Name it for OBS three. I select it and
choose this state. We want this video. When he ended the action, work ended and keep
this the same. And go here. Click Plus. We want when the
video, this video. And it switched to seem too. And he keeps switch the
same and select scene two. You can hear. Choose the transition. I keep the Without transitions. Okay, let's go to
general and see the magic of this
plugin. Click Start. We go here and play this video. And see here. You see. Let's repeat this. He ended and switch to seem too. But we have a little problem. When this clip It's loop. And that means this is checking our adventure
teen don't work, our macro don't work
because here, repeat. You see ADP, TDP. You need to go to
loop and n checked. Click Okay, and see now
he ended and go to s2.
5. How to switch from scene to scene when the timer go to 0: Hello everyone. In
the previous lesson, we learned how to switch
from scene to scene to when the video at
the scene one ended. Today, we learn
how to switch from scene to scene to when
the timer goes to zero. How we can do that? We go to tools. Advances see Twitter,
click macro, big plus, keeping the same. Quickly, replace,
choose the scene. Here, current scene,
It's scene one. And go to plus another time and choose here and
switch to the timer. Here, keep it, fixed it, and set it to 10 s here, and check this automatically
reset dimer and go here. We want to switch from
scene to scene to here. Switch here, give it the same
select seen to add color. Keep all of this the same. Let's test our work. Here. Click Seen one.
And we wait 10 s. Okay. He switched to seem to. It's switched to seem to. Our timer is zero. Now we want to switch back
from scene to scene one. Here, click plus another
time macro tool. You can change the
name to be the same. Here, click Plus, we want to switch from scene to scene one. That means now,
according to see, now it's seen to add here
click Plus at dimer. He had click and go
to timer and keep it, fixed it, and set it to 10
s. And the same unchecked. This automatically reset time. Now we want to
switch to scene one. Okay? Switch to keep all
of this the same. Now, it's work. It switched from scene to
scene to without any weight. We fixed this, go to macro. Go to macro one. Here, go to plus
and choose dimer. Another time. Here, choose
reserved and select macro to. Now go here and do the same
click Plus and go dimer. And here. Or is it
macro one? It's simple. Now you see here it's zero. When go to scene to
the time at work. You see It's very, very simple. You need to focus at our
work and copy our approach. I hope this be useful for you and see you in the next lesson.
6. Audio setting: Hello everyone. Today we have an
important lesson. It's important for
any podcaster or any streamer anyone use OBS
need to see this lesson. Our lesson is about how to be notified when your mic is muted. We have two methods. First method is to appear text in the scene when
our mic is muted. And the second method is
to appear notification. Here. Let's begin with
the first method. Click here, applause
for our text. Warning. Leak. Okay, Let's say
your mic is muted. Your mic is muted. Okay. And here, skated. We need to copy this
to all of our scenes. Here. Choose Paste
the difference. Now we use our
advances in switcher. Go to plus, keep it the same. Click here, plus choose here, ODU, and select here your mic. And here choose below. What means that? It means
when your mic is below zero, make the oxygen here. What is the action that we want? That we want to make it? Click Plus click here, and go to Scene item visibility. Click here, and
select current scene. And go keep this the same and this same and go to here, dq. And choose warning. Thus the name to our text. When our Mike, it's below zero, each show this message
in this scene. Okay, let's test this. Go to general and hide this. For C. The work. And click Start. Now it not work, but when we mute our mic, it appeared that text, I go to mute my mic. You see? Now we want to create
another thing that when our Mike is active,
hide this warning. Go to my macro and
click another macro. Okay, the key, choose ODU
and select your mic. Here. Keep it above. When our Mike is above zero. Go to create the action. Click here and go to seeing item visibility and
select currency. And here, instead show hide
and go to our warning text. Here, general, it's
work. Let's see. Our milk here. Our mic. Let's close this. Our Mike here, work. We don't see anything. When our mic is muted, I go to mute it. You see this the first method. Now we want to be notified here. Not clear and text here. Go to macro and click Plus. Here, click Plus choose ODU. And when our mic
here below zero. And here, the timer is fixed it to 5 s. Create the function. What is our function? Is to be notified. How to be notified? We choose system, try
and notification. Here. Create your text. Your mic is muted. We be notified with
this sentence. After 5 s. Every 5 s. Let's go general
and click Start. Now, I go to mute my mic. You see after every 5 s, it appeared that notification. And you can choose any
method that you want to do. This is our lesson today. I hope this be useful for you and see you in
the next lesson.
7. Appear name in the scene randomly: Hello everyone. In the previous lessons, we learn how to switch
from scene to see how to not be motivated
in the scene, how to appear
anything in the sea. And today we go deeper. Today we go to how to appear the name of yourself
or your guest. If you are at podcast
or you stream, you need this features. How we can do that? Go to Tools. Click Advanced seen switcher, go to macro, click
Plus, click Plus. Keep all of this the same. Select the scene. Click plus another time. Click here and
choose timer here, change this from
fix it to random. This the minimum time and
this the maximum time. Here, set it to 10
s and here to 15 s. Okay? The action is to play
the name after this, go to the 10 s, go to zero. We play this action. And this time it's
a random 10-15 s. Click here, plus choose here, media, and choose play. Select your name. This is our name. And go to test it. Okay, 10 s. We click Start. When it go to zero,
our name appear. And this is it. Okay? I hope this video be
useful for anyone. You can do this for any scene
with any number of guests. Thank you for watching and
see you in the next lesson.
8. Use date for start recording automatically: Hello everyone. In this lesson, I showed you how to use
date for start recording. And active is to do
mode and wait 15 s. And after that stop recording, all of this will be
execute automatically. We use to do switcher advance at seen switch and go to macro
click Plus here, okay? Rick plus. Here we use date. Search for date. Okay? And here, set it to after
we change, we change this. After we set our function. Go to here, click plus. First we want to
start recording. Search for recording here, recording ticket and change
it to start recording. After that, we want to enable
us to do mode click Plus here and go to studio mode. This is to Dumont. Click and set it to
enable studio mode. And after that we want
to wait 15 s tick here, players go to wait. And click here. Keep this fixed it
and say two to 15 s. Okay, good. After that, after waiting 15 s, click Plus to stop recording, we go to recording for the second time and he would keep it
to stop recording. Now, we go back to our
date and change this. See this time and set the
time after this here, 28. Okay? And after this acute this go to General and start here. Let's see what happened. We wait until this become 28. Start recording
enabled studio mode. Wait 15 s and stop. K. This plugin is magic. Now we see Yes, Very good. This recording and
we have studio mode. Now, see here, when this
recording go to 15 s, stop recording, you'll
see this top recording. I hope this be useful for you. And you can make this
with what you want. You can use all of this
for your own vintage. Okay, see you in the next
lesson with another lesson.
9. How to switch scene when you mouve your mouse: Hello students. In this lesson, we learned how to switch
from C1 to C2 when our mouse or keyboard
don't make any input. How we can do that? Go to advance it seems which
will go to macro plus OK, here and search for this. Here. It's a no keyboard or
mouse input for this, the time that it wait for
execute this function, we set it to 7 s and
go here, click plus. What we want to do. We want to switch to seem to keep this switch scene
and go to scene too. Okay. Let's active this. Okay. Now, any, not any
input after 7 s. It's which you see. Now. We want make the inverse. We want to switch from
scene to scene one. When the cursor to this, this mouse move,
nuclear plus, okay. Okay, here we use courser. Here, set it to ease moving. Coarser is moving, and the
action is pretty couplers. Switch to scene one. Let's stop this. I explain what we do know. When, if this cursor is
moving, switch to CMYK. And in this macro, if we don't have any input in
the keyboard or the mouse, switched to see two. But we want here to where? Here we want to wait. We want, we don't want
to switch to seen one. Before waiting. 2 s here. Make this top weight
to the clear, fix it and keep it the same. And here, 2 s, when the mouse move after 2 s, it's reached two scene one. Okay, Let's see. This. The most moving. Okay? Now we are at the scene
one and the mouse move. That mean we can't
execute the macro, macro number one, but now we
stop the move of our mouth. After 7 s, it switch. Now, when we move
our mouse after 2 s, it switched to Save Scene one. Let's see that. Now we move our mouse. After 2 s, it switched
to scene one. Okay? I hope this be useful
for your students and you can use all of
this for your advantage. Don't be afraid for practice. What you learn. Okay, see you in
the next lesson.
10. How to enable or disable any filter in obs: Hello Students. Today we use advanced. It seems sweeter. For filter. We have here text. We add filter, click Plus, Add scroll for this text. And here scroll horizontally. Now, we want to use advanced things
which are for disabled this and wait time and
enable another time. Go to Advanced scenes which
are dq plus k plus here. Choose filter. Select this text, scroll. If this takes is enabled. Make this click Plus
here and go to Filter. Go to wait first. Dan seconds after 10 s. Disabled this scroll
and click Plus. Go to Filter. Here, select text. Disabled the scroll
of that text. And after that disabled
weight, you choose Weight. Keep it fixed. And 7 s, wait 7 s. And
enabled and click Plus here. Go to Filter. Fourthly, second time. Text enabled. What means that? I explained for you? Okay? If this filter, this text
scroll is enabled, its work. Do all of this. First disabled. First wait 10 s. And after
that disabled that's grown and wait another 7 s and
enable that scroll. Let's see how it work. Now. It's work after 10 s. It's stop. 10 s. Now, it stopped. Now it count 7 s. And after that, it
enabled this graph. You see how it's
good this plugin. It's very good for any
streamer or podcasts, or you can use all of these features in this
plugin for your advantage.
11. Class project: Hi. Before we move to
the first lesson, I want from you in the end of this class to create
two scenes in OBS. First, create switch from C1 to C2 and wait in the
scene to 10 s. And then switch back from
scene to scene one and wait 15 s in scene one
and make it a loop. After that, record your
work in a video and share with us that video at project section
of this class. I hope you'll enjoy our class. And let's begin.