Transcripts
1. Introduction: Welcome everyone. This course is specifically designed to help you
learn how to design so many types of
logo concepts using the well-known vector
graphics software, Adobe Illustrator. So to make the course more
beneficial and accurate, all the shortcuts description
will be displayed in detail as a short note
in every single lesson. So you won't miss any stamp to help speed up your
learning process. Therefore, you will
learn step-by-step new ideas and techniques
using very simple language throughout the process
of logo design in each lesson of this
course to develop your own logo design
business and gain a better understanding of
graphic design as a whole. So don't miss out.
2. Inflation Logo: In this lesson, you
will learn how to make an inflation logo concept. So before we start, let's
change some settings. Let's make sure that you are
on the essentials profile. Then under the Window tab, Let's open all these panels. Let's open the color
panel and also the swatches panel alongside
the prices and the samples. Then let's open the gradient
panel and the Align panel. Let's attach them to this line, one by one, like that. Then if you want to resize
any one of these panels, let's select any
angle like that. In the swatches panel. If you want to increase the
preview of the swatches, Let's select this tab and
select large thumbnail view. The same thing with layers. Select panel options. Then select this and hit. Okay. Let's go back to
the properties panel. Let's select the Artboard tool that lets you change the
width to about 1,000 pixels and the height
to 1,500 pixels. Then let's select
the Selection tool. So to fit the artboard
to the window, Let's use the shortcut
Control and zero. So that's all for now.
So let's get started. So let's make a rectangle
for the background. Let's select the Eyedropper Tool and respect to this color. Now let's lock it
from the Layers menu. Let's select the ellipse tool. Let's make a shape like that. Then let's select the
direct selection tool. And let's select
this anchor point. Then let's move
it to the upside. Then select the
Eyedropper tool again. And let's select this color. Then let's duplicate it.
Let's make another one. And then select both. Let's select the
shape builder tool. Hold the Alt key. I
will remove this part. Then let's give it this color. And let's bring it forward. Then it's placed here until it snaps like that.
Then select both. Again, select the
Shape Builder tool. And let's remove this part. Then group them. Then select the Pen tool. Let's make a shape like that. Then close the shape. Then let's zoom in a little bit. And let's select
the ellipse tool again and make a perfect circle. Then let's duplicate it. Let's make another one. And then select all. This
is clearly a little bit on. Then let's place them here. It says killed him again. Then select both. And select the
Shape Builder tool. Let's select on
these three spaces. Then delete the circles. Then select both. With that. Let's unite them
using this icon. Then select the direct
selection tool. And let's round these
corners, one pion. Then let's zoom out. And let's pick this color. Then again, select
the rectangle tool. Let's make a rectangle like
that. And let's rotate it. Then it's placed
here. Let's zoom in. So select both and select
again the shape builder tool. And then let's remove this part. Then zoom out again. And let's select
this little cheap. Then let's pick this color. Then select both and group them. Then let's list it here. Then let's make
another rectangle. And let's give it the
scholar. Sure, it's zoom in. A little bit odd. This is tilted down a little
bit using the Alt key. Let's round the corners. And explicit here. Let's zoom out. And let's select
all and group them. Then select the Type Tool. And let's type in
the dollar sign For hold the shift with
the number four key. Correct. This mistake
by clicking on the backspace key for the Shift and the number
42 may exist dollar sign. Let's make the size of the
font to about 400 pixels. Let's give it a color. Then from the object tab, select, Expand and hit. Okay. Then it's placed here. Let's change the fill
color to this color. Then select both and group them. Then select the rectangle tool. Let's make a shape like that. Then let's swap the fill
color with a stroke. Let's change the stroke
to about ten pixels. Then from the object
tab, select Expand made. Okay. Let's pick this color. And let's arrange
it to backwards. Let's duplicate that and make another one
and the last one. So let's move them right and
left using the arrow keys. Then let's make
another rectangle. Zoom in. Let's
round the corners. Then let's duplicate it. We hear like that. Let's make another one. On the last one.
Then let's zoom out. And let's select all these four. This gives them this fill color. For sins impact. Right-click and
arrange to backwards. Then let's again
move right and left. Then select the first four. Let's duplicate them here. And let's flip them
horizontally using this icon. And also vertically. Let's move them and
blessed it in here until they snap to the bottom. So let's delete that. Let's select all and group them. Then select all these four
and group them again. And it's moving to the right,
a little bit like that. And through the upside. Then select all and group them. Then select the
Line Segment tool. And let's hold the Shift key, make a horizontal line. Let's make another one
aligned to the first one. Then select the selection tool. Let's select both. Then let's give the
stroke about 20 pixels. Let's click on the stroke
and make the Cap Rounded. From the object tab. Select expand it. Okay. Then let's pick
to this fill color. Then select both. Center them horizontally. So let's undo that. And let's group them first. And then select Polls, central them horizontally,
then group the whole thing. Then let's select the type tool and type in company all caps. Then let's change the
font size to about 150. Then let's place
it here like that. Then let's select
the Type tool again. Let's select this part only. Then select the Eyedropper tool and select this fill color. Then again, select the type tool and select the other part. And let's select this color. Then select both. Central them horizontally. Then group the whole thing. And let's just scale it down. Then it's aligning the
whole logo horizontally and vertically. Here we have it.
3. Corporate Logo: In this lesson,
you'll learn how to make a corporate logo concept. So let's get started. Let's begin by making a circle. Let's make a perfect simple. Let's disable the fill
color using this icon. Let's increase the stroke
to about 100 pixels. Then from the object tab, select, Expand and hit. Okay. Let's copy it
and paste it in front. And let's scale it
down while keeping the aspect ratio to
the center point. Until it snaps. Like that. Let's make the same process. Copy and paste it, and let's scale it
down. Then select all. Let's select the
Line Segment tool. And let's make a vertical line. While holding the Shift key. Let's make a horizontal line. Then select all again. And let's de-select the circles. Let's copy these lines
and paste them in front. Then let's change the angle. We like that. Then
select all again. Let's select the
Shape Builder tool. Let's de-select all these parts. Let's increase the
stroke about 20. Change the stroke color to
white. Let's undo that. Let's select the stroke, and let's change
the color to white. Then again from the object tab, select Expand and hit. Okay. Now let's ungroup
them multiple times. So select them again. And let's select the
Shape Builder tool. Let's select any fill color. Then let's select all
these black shapes. So click on each one with them. Then select the selection tool. Let's ungroup them again. Then de-select all. Then let's select all
these fellowships only while holding the shift key
to select multiple objects. Let's grow the selected items. And let's place
them here for now. Then let's select
all the shapes in the airport. Select that. And let's delete them. Then let's place it here. And let's ungroup it. Then select the
selection tool with the eyedropper tool to change
each one of these shapes, colors like that. Silicone again. And
let's group them. Let's just scale down
the whole cheap. Then let's select the Type Tool. And let's type in
corporate all caps. Then let's scale it
down while holding the shift key to keep
the aspect ratio. Let's change the font
to any font you like. And also if you want
to make it bold, then let's change the
size to about 100 pixels. Then again, select
the eyedropper tool. Let's select this color
and then select both. And let's center
them horizontally. Then let's group them. Then let's just kill
the whole thing up. Center them horizontally
and vertically. And here you have it. So if you learn a new skill
or idea and just listen, it would be great if you would leave a rating for this course. And you can also provide
an honest review and feedback to improve
the course content.
4. Spiral Circle Logo: In this lesson,
you'll learn how to make a spiral circle
logo concept. So let's get started. So let's make a rectangle
for the background. Then let's lock it
from the layers. Let's select the ellipse tool. Let's make a perfect circle. Then from the properties
this change the stroke. So let's increase it
to about ten pixels. Let's disable the fill
color using this icon. Based it in front. Then let's scale it down while keeping the
aspect ratio to the central point like
that. Let's zoom in. Then let's copy it and
paste it again in front. Then let's scale it a little
bit up to the downside, like that while holding the shift key until it snaps to this pink line. And make the same process
to the rest of the angles. That snaps to this pink line. Then select All. And let's
use the shape builder tool. Then let's combine
all these parts into one shape like that. Let's make the next one. The next one. Let's
make the last one. Then hold the Alt key, and let's delete this circle. Now let's zoom out. Then let's double-click on the
eyedropper tool. Select this focal stroke. So let's disable
it and hit Okay. Then let's select one by one. We change the color
of each one of them. Then select all again. Let's increase the
stroke to about 40. Then select all and from the
object tab, select Expand. Then hit. Okay. Then again select the
Shape Builder tool. Let's select all these
colored shapes only. So let's click on
each one of them. Then let's ungroup
them multiple times. Then de-select all. Then let's hold the Shift key and select each one of these. Let's group them and
move them aside for now. Then select all these
and delete them. Then let's move it
back, ungroup it. Then again, select each one of them and change
the fill color. Then select all again
and group them. Then let's move
it to the upside. Then select the Type Tool. And let's type in company. Then let's scale it
up while holding the shift key to keep
the aspect ratio. Let's change the font from here. Then let's make it bold. Then again, select
the Eyedropper tool and select this color. Then let's move it like
that and select both. Center them horizontally
and group them. Then center the whole thing horizontally and vertically
to the art board. Now you have it social, learn a new skill or
idea and just listen. It would be great if you would leave a rating for this course. And you can also provide
an honest review and feedback to help improve
the course content.
5. High Command Logo: In this lesson, you
will learn how to make high command logo concept. So let's get started. So let's select the
Line Segment tool. Let's make a horizontal
line from the left side, the right side of the art board while holding the shift key. Let's increase the
stroke to about 50. Then from the object tab, select, Expand and hit. Okay. And let's zoom in a little bit. Let's make a square. And let's select the
Free Transform tool. Then select this handle and hold the Shift and Alt and control keys to stretch both
sides like that. Then select the direct
selection tool. And let's select this handle
and hold the Shift key, and select the other one. To round both corners only. Let's make the
width to about 150. And let's make this
option checked in. Let's place it to this age
until it snaps like that. So let's hold and click on the down arrow key
to move it down. Then let's move it to the
right side, about 25 pixels. Then let's duplicate it also to the right side,
about 200 pixels. Let's keep duplicating it using the shortcut Control and
D. And let's zoom out. So select all, Let's unite
them using this icon. Then let's open
the brushes panel. And let's copy it here. Let's select the
pattern price and hit. Okay. And under the
outer corner tile, Let's select over two between. And also under the
inner corner tile, select again or two
between and hit. Okay. Then let's delete it. Let's make a perfect circle using
the Ellipse tool. Then it's a swap, the fill
color, who's a stroke? Let's select this
brush that we have made from the object tab. Select Expand Appearance. Let's unite both shapes. Let's make another circle. Select both. Central
them horizontally and vertically. Then unite them. Let's make vertical line to the center of
this heap like that. While holding the Shift key. Then select both and select
the Shape Builder tool. And let's remove this
part for all the Alt key. Then de-select all. Let's select this
line and delete it. Let's zoom in a little bit. Let's make another
vertical line. From this point until it
snaps to the other point. Let's increase the
stroke to about 20. Then from the object tab, select Expand and hit. Okay. Let's zoom out. And let's select the
Eyedropper Tool. And let's pick this color. Then let's zoom in again. And let's place it
until it snaps to the bottom of the
sheep like that. Then select all. And let's
center them horizontally. Then let's select the line and select the direct
selection tool. Let's select these both
handles on the bottom. And let's round them. Select both and group them. So let's zoom out again. And let's select
the rectangle tool. Let's make a rectangle. Then select the Ellipse
tool, make another circle. Let's scale it a little bit down from the bottom like that. And let's place the circle and scale it also down
to the center point. Like that. Then select all and central them horizontally.
Then select them. Select the shape builder tool. And let's remove this part. Then. Let's see, unite
all of them together. Then let's make another
rectangle on the top. Then select both
central them or gently. Then again, using the
shape builder tool. Let's remove this part. Let's make another rectangle and also center
them horizontally. Then unite them. Then select
the direct selection tool. Let's select one
of these handles around all the
corners like that. Then let's scale it down. Holding the shift key to
keep the aspect ratio. Let's select both. And let's center
them horizontally. Then group them. Let's
select the Type Tool. And let's type in high command. Let's give it up. Let's change the font, any font you like. And also if you want
to make it pulled, then select the Eyedropper Tool. And let's pick this color. So let's change the
width to about 800. Then select both. And let's
center them horizontally. Then group them. Then let's center the whole logo horizontally and vertically. Now you have it. So if you learn a new skill
or idea and just listen, it would be great if you would leave a rating for this course. And you can also provide
an honest review and feedback to help improve
the course content.
6. Creative Circular Logo: In this lesson, you
will learn how to make a creative logo concept. So let's get started. So let's begin by making a
rectangle for the background. Then let's select
the Eyedropper Tool, and let's pick this color. Then let's lock it
from the Layers menu. Let's make a circle. For the Shift key to
make a perfect circle. Then let's give it any
fill color for now. Then let's copy it and
paste it in front. Then it's duplicated. Let's change the
fill color also. Then select both. And let's select the Shape Builder tool. And let's remove these parts. Then it's again change the fill color,
which is this piece. Then let's select
the rotate tool. Let's select this handle. Then let's move
it until it snaps to the center point
of the circle. Let's first copy it
and paste it in front. Let's select this handle. Let's move it to the center. Let's hold the Shift key. And let's make an angle
to about -90 degree. Let's change the fill color. Let's copy it and paste
it also in front. Again, let's select this handle and move it to the
center until it snaps. Then hold the Shift key. And let's make -135 degree. And also change the fill color. Then let's select the
circle and delete it. Then select all
from the opacity. Let's change it to
the darken mode. Let's select this gradient color using the eyedropper tool. Again, Let's change the
opacity to the dark mode. Then let's de-select all. Let's select one by one and
achieving the direction of the gradient. Like that. Then select all again
and group them. Then deselect all. And let's select the Type Tool. And let's type in
creative all caps. Then let's scale it
up while holding the shift key to keep
the aspect ratio. So let's make it 100 points. And let's change the font
to any font you like. And also if you want to make
it bold, simplicity here. And also select the
Eyedropper Tool. And let's pick this color. Then select both. Center them horizontally.
Now let's group them. Then center the whole
logo horizontally and vertically. And
here you have it. So if you learn a new skill
or idea and just listen, it would be great if you would leave a rating for this course. And you can also provide
an honest review and feedback to help improve
the course content.
7. Advantage Underline Concept Logo: In this lesson, you'll
learn how to make an advantage underlying
logo concepts. So let's get started. So let's begin by making a
rectangle or the background. Let's select the Eyedropper Tool and let's pick this color. Then let's lock it
from the Layers menu. Let's select the
Line Segment tool. And let's make horizontal line while holding the
Shift key like that. Then it's increase the
stroke for about 60 points. Then from the object tab, select, Expand and hit. Okay. Sure, Let's increase the
width to about 1,000. Then let's zoom in a little bit. So let's make a perfect square. Then let's select the
Free Transform tool. Let's move this
handle while holding all the shift and control
and monkeys like that. To move both sides. Then let's place it to the
age until it snaps like that. Then let's move it to the
right side, about 25 pixels. Then hold the Alt key, and let's move it
about 200 pixels. Then keep duplicating it using the shortcut Control
and D magnitudes. So let's zoom out. Then select All. And let's see you write them
using this icon. Then from the brushes panel. Let's add the two. Then select pattern,
brush and hit. Okay. And under the
outer corner tile, Let's select Auto between. And also under the
inner corner tile. Select also or two
between and hit. Okay. Then let's delete that. And let's select
the Ellipse tool. And let's make a perfect circle. Then let's just
want the fill color with a stroke using this icon. Then let's select this
brush that we have made. So let's make the
stroke about 0.50 point that lymph
from the object tab. Select Expand Appearance. Let's see United using
this icon again. Then let's zoom out. And let's just get
it a little bit up. Let's make a circle inside it. Then select poles, and let's center them horizontally
and vertically. Let's make another circle. So let's change the fill color
to initial color for now. Let's make a circle like that. Then again, select all and center them horizontally
and vertically. Then select both the circles. Let's select Minus Front. Now let's select
the rectangle tool. And let's make a rectangle until it snaps to the center of the circle to the age. And also is this kid
down the other age. Then select All. And let's select the
Shape Builder tool. And let's hold the Alt key
to remove all these parts. Then let's select the
Line Segment tool. And let's zoom in a little bit. So let's make a line here. And another one on
the other side. And also on here. So let's zoom in. Then select all this again, select V shape builder tool. Let's hold the Alt key and
then remove all these parts. This is omen. For
the small parts. Then select the selection tool. And let's delete
all these lines. Zoom out a little bit. Let's zoom out. Now let's select the direct
selection tool. And let's round all these
columns using this, any one of these
handles like that. And let's make the scene
with this half circle. Then select the Eyedropper Tool. And let's change
each one of them. Then select all and group them. And let's just give
him a little bit down. And let's select the Type Tool. And let's type in anything. So let's type in e.g. advantage, which
is carried down. Select the Type tool again. And let's type in on the line. Let's simplicity
here in the Central. Let's see skeletal through it. So let's change the fill colors. Also. Select the eyedropper tool. Let's select this color and the other color
for the other text. Then select all and group them. Then scale the whole thing down. Then center it horizontally
and vertically. Here you have it.
So if you learn a new skill or idea
in this lesson, it would be great if you would leave a rating for this course. And you can also provide
an honest review and feedback to improve
the course content.
8. Headquarters Logo: In this lesson,
you'll learn how to make a headquarters
logo concept. So let's get started. Let's begin by making a
rectangle for the background. Then let's select
the Eyedropper Tool. And let's pick this
gradient color. Then select the
gradient tool to change the direction With this
gradient will be like that. Let's lock it from
the Layers menu. Let's zoom in a little bit. Let's make another rectangle. Let's give it a light color. Then select the
Line Segment tool. And let's make a line
until it snaps like that. And hold the Shift key. Let's increase the
stroke to about 15. Then from the object tab, Let's expand and hit. Okay. Then select both. Let's select the option. Let's again give it a color. So let's zoom in a little bit. And let's select the
direct selection tool. Let's round the corners
using this handle. Then again, select
the rectangle tool and let's make a perfect square. Let's increase the
stroke to about tin. And also it's throne the
criminals using the sandal. Little bit like
that. Sure, Let's disable the fill color using this icon. From the object tab. Select, Expand, and hit. Okay. Let's place it
to be here like that. Let's duplicate it while holding the Alt key and
make another one. Then select all,
scale them down. Let's select the whole
group and group it. Then let's duplicate
it multiple times. Then de-select all.
Then select all again. Let's de-select the white
shape. We can group them. Then select all again. And let's center
them horizontally. Then let's select the
Minus Front option. Let's select the
rectangle tool again, Let's make a rectangle here. Let's zoom in a little bit. So let's round the corners. Then let's copy it and
paste it in front. Let's make a circle
using the ellipse tool. Hold the Shift key to
make a perfect circle. Then select both. Let's select the
shape builder tool. And let's remove
all these parts. Hold the Alt key, then
also round the corners. So let's move this rectangle until it snaps to
the first shape. Then let's move it using the
up arrow key five times. Let's make the same
with this half circle. Let's select the
Line Segment tool. Let's make vertical line. Then let's increase it
to about four. Expanded. Then select both, unite them, and also give it a white color. Then select all the shapes. Let's center them
horizontally. Then group them. Let's zoom out. And let's
select the Type Tool. And let's type in headquarters. Let's scale it up. While keeping the aspect ratio like that. Let's give it a color. You can change the
font as you like. And also if you want to
make polled from here, scale the whole logo down here and select both. Let's center them
horizontally. Then group them. Now let's make the width of
the whole logo to about 800. Then change the alignment
to the airport like that. Then century horizontally and vertically. And
here you have it. So if you learn a new skill
or idea in this lesson, it would be great if you would leave a rating for this course. And you can also provide
an honest review and feedback to help improve
the course content.
9. Flash Time Concept Logo: In this lesson, you
will learn how to make a flush time logo concept. So let's get started. So let's make a rectangle
for the background. Let's select the Eyedropper
tool and select this color. Let's lock it from
the Layers menu. Let's select the ellipse tool. Under the rectangle tool. Let's make a perfect circle. Let's increase the stroke
to about 80 pixels. Then disable the fill
color using this. Then from the object tab. Select, Expand. Then hit. Okay. Now let's select
the Line Segment tool. Let's hold the Shift key to
make this vertical line. Let's increase the
stroke to about 16. Then again from the object tab, select, Expand and hit. Okay. Then let's zoom in. Let's copy it and
paste it in front. Then let's rotate it oil holding the Shift key
to make this angle. So make the same
process and rotate it. Let's make the last one. Then select all center them
horizontally and vertically. Now let's again select
the ellipse tool and it's to make another circle. Then select all central them again, horizontally
and vertically. Then hold the Shift key. And let's de-select the circle. Then select the
shape builder tool. Hold the Alt key to
remove all these parts. Now let's select the
direct selection tool. And let's use these handles
around the corners. Then select All. And
let's unite them using this icon. Now let's zoom out. And let's select the
Line Segment tool again. And let's make a line like that. And also give it 80 pixels for the stroke. And it's expanded. Then select all select
the Shape Builder tool. And let's remove
all these parts. Now let's select this color
using the eyedropper tool. Then let's zoom in. And
let's select the Pen tool. And let's make a zigzag shape. Then click on the exit key. Let's swap the fill
color was the stroke. Let's say give it 30 pixels. Let's click on the stroke. And let's change the
profile to this. Let's expand it and select
V shape builder tool. And let's combine all these
triangles into one sheep. Then let's just treat
it using this handle. Zoom out a little bit. Let's select the eyedropper
tool and give it this color. Now let's duplicate it
and give it the scholar. Then let's zoom in
again and select poles. And select the
Shape Builder tool. And let's deselect this part. So let's remove it. Then
select both and group them. Then select the whole thing and center them horizontally
and vertically. Then group the whole thing. So let's scale it down. Let's just zoom out for now. Select the Type Tool. And let's type in
flash all caps. Then it's just scale it up. And then select the
Eyedropper tool and select this color. Let's select the
Type tool again. Let's type in time
and also scaled up. So make both the same size. Then let's select
the Eyedropper tool and select this color. Then select both. Let's central them vertically. Then group them. Then
let's place it here. Then select both. Let's
center them horizontally. Then group the whole thing. And let's just scale it a
little bit up like that. Then center the whole thing
horizontally and vertically. Now you have it. So if you learn a new skill or
idea in this lesson, it would be great if you would leave a rating for this course. And you can also provide
an honest review and feedback to help improve
the course content.
10. Aqua Concept Logo: In this lesson, you
will learn how to make an Apple logo concept. So let's get started. First, go to the Layers menu. Let's make a new layer. Let's make a rectangle
for the background. Then let's select the eyedropper
tool. Use this color. Again from the Layers menu. Let's lock this rectangle. Let's go to the properties. Now. Let's make a
perfect circle. So let's select
the ellipse tool. Give it any color for now. Then let's duplicate it. And also change the colors. Now, let's scale it
a little bit down. And it's implicit to be here. Then select both. And it's
opening the align panel. Central them horizontally. Now let's form the Pathfinder. Let's choose Minus Front. Then again, select
the Eyedropper Tool, and let's select
this gradient color. Then select the gradient tool to change the direction
of this gradient. Let's make another circle. Then let's click on
the expand shape. Select the direct
selection tool. Let's select this anchor point and let's move it
a little bit up. Then let's click on this
icon to make a corner. Then let's make
another circle color. Then let's duplicate it. Then select both. And also click on
the Minus Front. Then it's simply
seek to be here. And let's scale it
a little bit down. Then select both again. And let's align
them horizontally. And also click on
this Minus Front. Then let's select the direct
selection tool again. And let's grab this
handle a little bit down. Then select the Eyedropper
tool to select this color. And let's clean the
direction of this gradient. We'd like that skill down. And let's place it here. Let's make another duplicate
and also scale it down. So skills this again. And let's make
another duplicate. I'm also scared it down. Then select All. And let's
group them with this tab. Then let's move it
to the top right. Now, let's de-select all. Then let's select the Type Tool. And let's type in aqua all caps. Then let's scale it up. If we are gonna give it a
gradient, nothing will happen. So let's de-select the
fill color from here. And from the appearance panel. Let's select Add New Fill. Now if we're gonna
give it a gradient, it will take place. So let's select the
Eyedropper tool and select this gradient. Then let's change the direction. Then select both. Let's align them horizontally
and also group them. And let's align
the whole thing to the Artboard horizontally and vertically. And now you have it. So if you learn a new skill
or idea and just listen, it would be great if you would leave a rating for this course. And you can also provide
an honest review and feedback to help improve
the course content.
11. Swipe Concept Logo: In this lesson, you
will learn how to make a swipe logo concept. So let's get started. So let's select the ellipse tool under the rectangle tool. And let's make perfect circle. Now let's make another one. Let's hold the Alt key and
let's duplicate it twice. Then let's select the
Line Segment tool. And let's make three lines
from the center to the center. Like that. Then select
the selection tool. Let's select all. Then
hold the Shift key. And let's de-select all. Let's increase the
stroke about 25 points. Then from the object tab, select, Expand and hit. Okay. Then select all again. Then let's unite them
using this icon. Then let's select the Type Tool. And let's type in the letter S. Then let's select it. And let's change the color to white color. Then let's move it to the
center of the circle. And let's scale it up a
little bit like that. Then again from the object tab, select Expand and hit. Okay. Then select poles. Let's select this Minus Front. Then let's scale the
whole thing down while holding the shift key to keep
the aspect ratio like that. Then let's make another circle. All the Shift key to
make a perfect circle. Let's swap the fill
color with the stroke. Scale it down a little bit. Let's increase the stroke
to about 50 points. From the object tab. Select, Expand and hit. Okay. Then again, select the
Line Segment tool. Lets you get here in the center. Let's hold the Shift
key and let's make a vertical line like that. Then let's increase the
stroke to about 150 points. And let's expand it. Then select poles. And let's select the
Shape Builder tool. And let's remove
all these parts. So hold the Alt key. Then let's select the Star Tool. And let's click any free-space. This menu to show up. So let's make the points through about three, then hit Okay? So let's increase it, the words of that to
about 100 pixels. Then it's implicit
here like that. Then hold the Alt
key to duplicate it. Then let's flip it vertically. Let's place it here. Then select all. And let's select this shape. The next, unite all
them. Using this icon. Then explicit,
central like that. Then select all. And let's group them. And this is kill the whole thing down. List here for now. Then let's select
the Type tool again. And let's type in
swipe all caps. So to apply a gradient,
join editable text. Let's open the appearance
panel from here. Let's add a new fill
using the cycle. Then it's closet.
Then select both. Let's center them horizontally
and it's group them. Then from the gradient panel. Let's add a linear
gradient like that. Let's select the gradient tool. And let's make a vertical
gradient like that. Then center the whole thing
horizontally and vertically. And now you have it. So if you learn a new skill
or idea and just listen, it would be great if you would leave a rating for this course. And you can also provide
an honest review and feedback to help improve
the course content.
12. Hexagonal Concept Logo: In this lesson, you
will learn how to make a hexagonal logo concept. So let's get started. Let's make another layer. Let's make background. So let's make a rectangle. Select the Eyedropper tool, and select this
color. Let's lock it. Let's make polygon
diagonal shape. So hold the Shift key to
keep the aspect ratio. Let's give it any
fill color for now. Then from properties panel, Let's enable the rulers. Let's make sure that the snapping options have
a Snap to Point only. Then let's grab the line from the upside until it snaps to
the upside of the polygon. Let's grab another
one. For the bottom. Let's select the
Direct Selection Tool. And let's see, grab one from the left side until it snaps
to the intersection point. Let's see, grab another
one for the other point. Then let's select the Pen tool. Let's make an anchor point here on the intersection point. And another one
on the guideline. And another one here.
Let's close the shape. Select the Eyedropper Tool, and let's select this gradient. Then let's duplicate it. I change the angle to 60 degree. Then let's zoom in a little bit. And let's place it until it
snaps to the right place. Then makes same process
for the rest of the angles. So sick of it. Now, 120 degree gives us 180, that 240. And let's give the
last 1300 degree. Now let's select
the pen tool again. Let's make a point here. And another one on the
intersection point, and another one on this age. Then let's close the shape. Let's give it any fill color
for now. This is true. Do something else. Then let's make
the same process. Duplicate it, and seeing the
angles of each one of them. Let's zoom out. For now. Let's select the background
polygon and delete it. And also let's select all
these guidelines. The rhythm. Let's zoom in a little bit. And let's select each
one of these shapes. And let's grab the
eyedropper tool and change the gradient of them. So let's change the other one. Zoom out a little bit. Let's select this gradient. Shown with them,
another gradient. And also the little shapes. Let's give them the right
color for the gradient. Then let's change the direction of each one of these gradients. We can angle like that
for each one of them. Then select all and group them. Then from the Align panel. Let's make the alignment
to the art board. And let's center it
horizontally and vertically. Now you'll have it. If you learn a new skill
or idea in this lesson, it would be great if you would leave a rating for this course. And you can also provide
an honest review and feedback to help improve
the course content.
13. The Project: Once you have finished all
the lessons in this class, it's time to say,
congratulations. So the best way to test your
knowledge is by practicing. You can make an abstract
logo concept or be more creative and make any logo
design from your imagination, showing you finish the project. You can share it with the class. And it would be
great if you would leave a rating for this course. And you can also provide
an honest review and feedback to help improve
the course content. And if you liked this class, you can follow this
account so you don't miss new classes
in the future.
ProTurial, Software Tutorials
