Transcripts
1. Introduction: Hello, how are you?
Today, in this class, we will learn how to draw Mandela step by
step, Mandela art. It is complex graphic designs that are often
circular in shape, and it depends primarily
on the presence of a central point in the
middle of the drawing from which all other drawing and geometric shapes that are
included in the drawing emerge. In this class, we will know
the Mandela drawing steps. Step one, Preparing
tools. Step two. Steps two, draw
Mandela and Gress. Step three, steps two,
dry Mandela ships. Step four, lot to draw Mandela.
2. Mandala drawing tools: One Mandela drawing tool paper. In this lesson, we will draw the Mandela on a black paper. A ruler and compass protractor is 180 degrees white color pin. Because the round
paper is plaque, you can also use a pencil. Sharp nerve reserve. White or gray bin is preferable
to use the thin Tibi bin. Wind drown Mandell like 0.3
3. Steps to draw Mandala circles and grids: Step two, Mandell integrate. We will now begin to
do circles integrate. At first, we will need to find out the center
of our paper. So I will measure the paper. My paper size is
18, 13 centimeter. Length is 18 centimeters. I will place a marking
here at nine centimeter. Then do align. Width is 13 centimeter, so I am going to place a mark at 6.5 centimeter, then align. Now we got the
middle of the paper. We will use the
comvass blessing it at the center point and begin to draw a circle littly smaller than
the widths of paper. Using the btractor will begin
to divided this circle. Now place the protractor
in such a way that its center is exactly on
the center of the paper. Now you can mark the angles. Let's say I will mark the
angle at every 20 degrees. I will market here at 20. The next one is 46, 18, 100, 120, 140, 160, 180. Let me is the extra line here. After marking the points, I will connect each of
them with the center. This should be done
very carefully. Every time that we
pass from the center, I will connect to the
first coroner like this, then the second and third. Now I have finished
connecting all the corner. I'm going to erase the Str line. Now with the help of a compass, I will start creating
concentric circles. The radius of the first
circle is 0.6 centimeter, so that the distance
between each circle and the other is 0.6 centimeter. The radius of the second
circle is 1.2 centimeter. And the third is 1.8 centimeter. Then fourth is three centimeter. Fifth is 3.6 centimeter. Six is 4.2 centimeter. Stevens is 4.8 centimeter. It is 5.4 centimeter. That's how we got a
template of Mandilla.
4. Steps to draw Mandala shapes: Now we learn how to draw the ships that we will
use in drawing Mandella. The Mandell model
we will be drawing today will involve
using eight ships. I will draw to paralleling
to Dral ships. First ship, Leaf, and the
eight ships will be drawing in the same ship with the difference in size
and interior details, you will draw a line in
the middle of the ship and then draw parallel lines like that second ship. I will draw the same ship as before and repeat it inside a smaller size and then fill the inside
with a thick pin, like one mill or it
is possible to use the same pin that we draw to
fill the inside like this. The net, the same steps will be followed then with
Drell this pattern within the ship with filling the species around it in the ship, you will draw in the ship a small leaf pattern and then ll inside its lines and defill this part here. I will draw a wrangle in
and around this ship. I will draw this padroing this ship. It is just a duplication
of ship number four, ship number seven in
which this pin is used to identify the exterior and boot sick dot over the ship. Here I forget to fill the ship, this part, ship number eight. Same as the previous step but I will draw this
pattern inside it. Now we are moving on
to their last ship.
5. Practicality to draw Mandala: Now it is time to draw ships
on our Mandela Temple. We will start drawing
the first ship like that and repeat it
around the circle, and then draws the
inside of this ship. The drunk always starts from the midpoint towards
the outside. It is important to
know that you can rail ships and coral species
within the ship and any brophyed
color type instead of using the same in the draw
to fill their species. Please note that you can change this ship depending
on your choice. As there are many different
ships to Dro Mantilla, they may be geometric ships, Natal inspired ships, or
frequent random ships. You can also control the size of the ship set drawing
ships uniformly. Now let me tell you some
tips when drawing Mndilla. Draw light lines with the pencil so that
you can are them. If you make stick in drawing, you can draw the mandilla
with wood colors or markers, or you can make the initial drawing with a
pencil and color it later. Drawing a Mandela
becomes much easier when you use the God template and
gilding construction lines. On the other hand, this ensures that the final result
is more beautiful. The higher quality
the drawing tools, the more intricate
the Mandela will be. Now let's complete this row
by repeating the shape, then draw inside it. Feeling is that part. I'm starting the
neck of the shape. Notice that the shapes get bigger as we move
outward from the center. And it gets smaller
as we move towards the center because the size of the grid towards the
center is smaller. We continue to draw
ships from each section. As we learned it in the video of drawing Mandela ships
in our Listen today Nick, it's ship, I will
drowing like that. In this way we have become able to draw this ship
of Mandell drowing. We move to the last section
and draw this Shep, I will draw details
inside this ship. Now We have finished
drowning all of them. And Dell ships, our lesson
for today has ended. Thank you for watching.
Marwa Ali, DIY Art & Craft
