Learn Graphics Design and Illustration with Adobe Illustrator

1. Introduction: Hello everyone. Welcome to a class of Adobe Illustrator for learning Graphic Designing. If you're planning to learn graphic designing from the beginning, then you're in the right place. Because we will cover in this class from the basic to advanced level. So this is a beginner level. Of course, if you have no previous experience, then you can join in this class. Let's take a look at what you learned from this class. First, I'll introduce you guys to what Auto Illustrator is. Then how you can draw using shapes in Illustrator using the Shape Builder tool. Drawing with Shape Builder tool. Project on creating logo shapes in Illustrator drawing with the Curvature tool, using the pen tool. Drawing with the pencil tool. How to use brushes in illustrator drawing with the width tool. Using type and forms in illustrator typing on a path in illustrator difference between RGB and CMYK colors take color from images using eye dropper tool, masking image inside shed. After completing this class, you will be able to express your ideas freely. You will be able to make logo, you can draw objects. You'll be able to create cardon characters. And you will also be able to save vector EPS file. This is a project based class. During learning, you will have class project. What you learn. You will be able to participate in class project. You can do practice while you're learning. You will have supporting resources in this class. It will be easier for you to learn during learning. If you face any issue or if you have any question, then feel free to ask me. I'm always there for you to help you. Let's start learning AutobLstrado for graphic designing together. 2. Starting of illustrator: Hello everyone, and welcome you all to the first chapter of the Adobe Illustrator Essential Tutorial. Okay, so here on our first chapter, I'll be giving you guys an introduction to Adobe Illustrator. So what this basically is what all you can do through Adobe Illustrator and what are presets. And also I'll be explaining you guys about the workspace where we'll be basically working. Okay, so we'll be learning about all of this here in this particular chapter, so let's not waste time and let's get started with the first chapter of our Adobe Illustrator Essential tutorial here. This one is the home page of the Adobe Illustrator. Adobe Illustrator is a graphic designing application. This one is used by the graphic designers to create vector graphics, and also vector images as well. Okay? Vector images and vector graphics are made of points, lines, shapes and curves. And based on the mathematical formulas, rather than a set of amount of pixels, and therefore can be scaled up or down while maintaining image quality. Basically, with Illustrator, we can create different type of graphic design. And this one is a advanced tool to create our graphics. All the graphic designer, most of them, they prefer to work in the Ab Illustrator because of its vast features and also because it provides accurate work. Okay, so we can do a lot of things using the Ab Illustrator. Let's get started with our home page first here. As you guys can see, this one is the Adobe Illustrator logo. Okay? If you're familiar with any other Adob software. So you guys might know that how the Adob applications or the software looks like, the logos are quite similar. If download a Illustrator, you need to go to the Creative Cloud account from your Creative Cloud account. You guys can basically download this one and start working here. Okay, here you can see these are different type of presets, as you guys can see here on my home page. From here, I can actually get different type of presets here. If I want to open a new file, I can open a new file. But if I do have any file already in my system from here, this open option, it will directly take me to my place. If I go to the auto Illustrator resource file here, you guys can see I do have different of logo, so I need to first come here. Okay. So I'll just zip all of my files. I'll come here, Illustrator resource file, and I will just extract all from here. Okay. While it's finished working here, you can see I do have a Illustrator file here. If I want to open anything from here, I can basically click on this one and it will open in my Illustrator file. This is how we can actually open. Let me come back again to my home page. From this home page, you guys have understood the basic things. If you have used again before any kind of Adobe software, then you guys might be familiar with this similar workspace. Okay, so here are a few of the learn options. From here, we can basically look at different type of tutorials and also different type of designs. Okay, from here we can get inspiration. Suppose if we want to explore any shapes or if we want to jump into any color, we can get a tour from here, basically. Okay, so this is the learned option if I want to see all the tutorials. So these are not a complete tutorial, but this will just show you some basic works over here. Okay, so this one is the Learned option. And now under the files option here, I do have your files shared with you and the deleted files. Okay? In your files here, you will have all your saved work which you have done in Illustrator. It will be saved here. Okay, in your cloud space. So here you guys can view it. After that, when you're collaborating or working with someone in the Illustrator, they can also share your work. If they have shared their particular work with you, it will be saved in shared with you option. Okay, so from here basically you will be able to see if any of the people or if any of your teammates have shared any document with you, then that particular work will be saved. And last comes the deleted option, and this is quite self explanatory. Okay, so if you have deleted any particular file from here, it will be saved in this deleted page. Basically you guys can come here and also you can actually restore your file or delete it permanently. But if you just delete your file, it will be permanently removed from your page after 30 days. So you do have a 30 days time if you change your mind to restore it. Okay. So now let's again come to my home page. From here, you can view all your recent files. Okay? So if you have a lot of many files here. Okay. So from here. Sorted by name, size, or what kind of file. You guys can do that. And also search from here according to the name, okay? And here you can have a list view. And if you want to see a preview on a grid view, you can click on this grid view. Okay. For me I basically prefer the grid view that I can see what I do have because it's quite hard to remember the names. Okay? Once you see any particular work, it's quite easy for us to see and actually log into that application, okay? Now let's try and create some new file, okay? So to create a new file, you guys will basically click here. And here you can see you will be able to see all your recent files. If you want to download any template from Adobe Stock, you guys can actually type something and you can search here on Go. Then it will take you to the Chrome page. And from there you can basically download different type of templates. If you do have saved any kind of work here, you can save this particular work here, you will have different presets according to the mobile. Okay, so here you can see I do have a lot of presets over here, so there are a few sizes according to the phone. Here you can see iphone 876 Plus and a lot, okay? So you guys can come up here and check which one you want to use, okay? Basically. Now this is the wave and here are different templates. If you want to use it in your work, you guys can do that as well. All the print option, the Film and Video Art Administration, more templates. You guys can see a lot of templates here. I'll be using all these free templates from here, okay? Suppose if you want to create any card, so basically you can take any of the templates from here on this one, you guys can modify that and start working on your card from here. Okay, Suppose if you're creating any kind of logos from here, you guys can take any kind of free templates from here and also modify those according to the need of your client or yourself. Okay, so here are different presets. What size do I want? Do I want a postcard sauce or a poster size? Okay, so this is the one. So I hope you guys have understood about the presets and how presets is basically used. So let's come here in this panel, okay? So basically this is the place where you will be able to create page and you will be able to rename your illustration. Okay, maybe I will type here as introduction class. Okay, I'll write introduction here. You guys, from here you can change the width and the height here. As you can see, my unit is in points from here. Basically, you guys can also select if you want it in pixels or points or pics. Inches fits and inches, yards, millimeters, centimeters and meters. All these units are here. Mostly I'll be using inches in all of this. Here. Here is the height, okay? So you guys can do that basically from here, you guys can check the orientation. Okay? So orientation is basically, do we want your artboard in a portrait shape or in a horizontal shape? Okay, so you guys can do that. Okay, and if you just hover your mouse over this icon, you guys will be able to see what orientation is this here? They're also asking that how many artboards do you need? Okay, here I'll be only choosing one artboard. And after that comes the Bled option. If you're familiar with Audob in design or any other software by Adobe, then you are also familiar with the blade. Okay? So blid is basically the margin outside your page. Okay? So blids extend colors and elements past the edge of your document so that it can be printed and trimmed down to sizes with no unwanted white margin around the edges. So this is used for that. And also it allows you to run artward to the edge of a page. On a press, the artwork is printed on a large sheet of paper. Okay, so when you go to a press or anything, the artwork or something, when you're creating a book or anything as such, it is printed in a large sheet of then it is streamed down to its size. If you do not allow for one to eight of an inch blade, any misalignment while cutting will result with the artwork not running to the edge of the paper. Okay. It is just an extra space to save your design. Okay, this is B. What I can do is I can actually increase the size from here. As you can see, once I'm increasing my blade here, all of these are changing. Okay. Bled is on four sides. I'll be showing you if you just unlink this one. Now here you can see if I change this one. Other three values are not changing. So what I'll do is I'll keep 0.25 " only. And here this are few of the advanced options, okay? So this is the color mode from here, CMYK color or RGB color. I'll take the RGB color from here. And here, they're asking me for the raster effect. Okay, this one is quite good for me, which is 72 PPI. I'll select this, the preview mode. I will just keep this one in default, Okay? There are also more settings regarding this one. From here you can actually customize your profile. A number of artboards, some basic things which I do have here as well, okay? But this is more advanced from here. I can choose the height width. Okay? Some advanced options, a few other templates. So these are mostly the same. Not exactly. Okay? From here I'll just cancel this. Now, I will create new document here. Okay? I'll click on Create. Sometimes it might take some time here, You guys can see I do have my artboard here. Okay? So basically this is the artboard and here is the margin. And this one here, you can see a red line just outside my margin. This called the blid. Okay, this is the blid which I was talking about. Let me just give you guys a preview of what all panel do I have. This one is basically the workspace where I will be making my graphic or I will be working on my graphic from here. Okay, This one is basically the toolbar. So we will use all of this tool to edit our design. Okay, This one is the property spanel. From our property spanel, basically we can select different units, Number of artboards. If I want to put any rulers, I will be able to put the rule here. You guys can see. Just to measure the size or to get alignment, you can use rulers. Okay, here is another option as guides. Okay, here is the guide option. From here are the snap option. Okay, We'll be learning about all of this in our later classes. Here you can see if you want to take any quick actions. Okay, a few of the options here. These are a few of the menu. Okay, if I come to edit, I can redo or undo any of the thing. For that, to show you guys in brief, let's come here and I'll come to the file option. I will open Illustrator in my file. Okay, I do have this one. I'll come to my resource file. From my resource file, I will come to this illustration. Okay, I'll come to this illustration and I will select this one. Okay, here you guys can basically see that I do have an illustration. What I can do is with my Space bar, I'll click on my Space bar. Here, you can see my mouse is now a hand icon. Using this, I can just move around through this particular workspace. If I want to zoom in, I will just zoom in using my control and plus, okay. So here you can see I have just zoom into this particular work. Here, let me tell you guys something about all these tools, okay? So here if I come, so this is basically the selection tool. Using the selection tool, what you guys can do is you guys can basically select a particular object in your workspace, okay? So if I come here, I will click on this again. Suppose I am selecting this particular icon from here. What I want to do is I want to just shift this particular part from here. Okay? This particular thing. And I want to move this one from here. Okay? Basically I can select this one. I will come here again, Okay, I will this icon. What I want to do is I just want to move this outside here. You can see using this, you can basically move around and also select different type of options here. Okay, This is about the selection, and now there is another selection tool. Okay? So this is called the direct Selection tool. Okay? So when you just hover around the icon, you guys can see what it basically does. Okay, so when you try to rid that one. So it says that select and add, just anchor points and segments to reshape paths. So here I have showed you using this selection tool that I will be able to just select a particular thing from here and I'll be able to move around. But with my direct selection tool, what I can do is suppose I have selected this one here, or I have selected this here, what I can do is I can actually move this one. Actually adjust the size. Suppose I will do this one here. Also here if I just zoom in. Okay, here you guys can see I do have many parts here. If I want to just click on this one. And using these icons, I can just basically select the sizes from here. And I can actually work around all of this. Okay, I'll just go back. That looks ugly. I'll just come here. I'll just go back. Yeah, back again at the same place here. This is basically called the Pento under Pentool. I do also have the Anchor Point tool is basically used to create different designs or shapes. Okay, this is how you guys can actually design. This is how this one is actually done. This is how you guys will be able to select all of this. Now I'll just select this and delete this one here. This one is the curvature tool. Okay. Using the curvature tool, I'll be showing you how you can make your own designs. This one is the shape tool. On the shape tool, I do have different shapes. Okay. Rectangle elipse tool, polygon. Then I do have the star tool. If I want to create any line, I can do all of well. Okay, this is that one and this is the brush to. Okay, so this is the paint brush. And I also have my pencil tool right here, and this one is the blob brush two. I'll be explaining or showing you guys a project in each and every tool which I have available here. Okay? This one is basically the type two. If you want to type anything in your document while doing your graphic designing, I can actually use the type tool to write around. And this one is the rotation tool. Okay. Inside rotation, I also have the scale to the reflect to the shear two. Okay. We do have all this option as well. And now let's come to the eraser. So if you want to erase something, you guys can basically use the eraser tool. Or if you want to cut something, you guys can use the Caesar tool. Now let's move on to this tool. Okay, This one is basically the shape builder, So we can basically create different shapes by combining and erasing parts of similar ones. Okay? We can actually create different shapes from here. And this one is the gradient tool. Okay? So if I want to add a gradient of color, okay, I can basically do it from here. This one is the eye dropper tool and this one is the curvature or the width tool. Okay? Using this width tool, I can actually change the width of any of my design here. This one is the blend. Okay? When we do have more shapes and colors, we can actually combine those and make a good design here. This one is the artboard from here. Basically, if I click on this one, I will be able to make another artboard here. Basically, in Illustrator, we need to work inside our artboard. Okay? We can't work outside the artboard if you're trying to make any logo or anything as such, any work will do, we need to do inside an artboard. Okay. I'll select this. And I this one again. Here. I do have my zoom two, okay? And the shortcut key for that is control plus to zoom in and also control minus to zoom out. Here you guys can see the feel and stroke, okay? If you don't want any color, you guys can choose all of this option, okay? If you want to add gradient, this is another option how you can add gradient here. This is the default feel stroke from here. I can also select which one color I do want as default. Okay, this is color option here is if I want drawing something, This is the normal view here. If I want to drop behind, okay, here you do have screen mode. I can change my screen mode from here. If I want to edit my tool bar, I can basically edit my toolbar. If I do want any of these tools from here, I can actually add all of these tools from here. By default, I do have this one, okay here. I can also choose how I want my tool bar to be. Mostly I prefer it on the top hand side, but what I can also do is I can just get it in one straight line. Okay. For that what I can do is if I just click on this here. Okay? You guys can see I do have my toolbar or all the tools here in one line, okay? You guys can like this, but I want it in this one, okay? Or in double line that it will be quite easy for me to access. Okay? I hope you guys have got an basic idea about what all this is, okay? This are a few of the option which we'll be learning in the later stages of our classes once we just go step by step. Here you can see Select Effect View Windows, okay? From here basically what you guys can do is you guys can actually check out your workspace, okay? Right now I'm using the essential workspace, but if you want to use any other works. The Essential Classics, or Layout Painting. Okay, so you guys can use this one as well. Essential Classics is basically the previous version, okay, If you're using any previous version of Ado Illustrator, you guys need to choose the Essential Classic workspace. And from there you guys will have all these options on top to do the editing or to get this property spanel. Okay, this is that one. And there are different other things which we'll learn slowly once we move deep into our lesson. Okay, here is the help option. If you do face any kind of issues regarding the Ado illustrator, this one is crashing or you're not able to work properly. Suppose you have saved any particular work, now you're not able to find that particular file. In that case, you guys can come here and get some help regarding that, okay? You can dodge a complaint as well. Okay, from here basically you will get different tutorials, community support. You guys can go and check out the work of different designers that how they do their work basically. Okay, here is that one. Let's come to this properties panel. Suppose I have selected this one, basically from here in my artboard. I can transform my artboard. I can also, I can also change the name of this particular artboard. If I want to put any kind of preset, I can put different kind of preset from here. Okay, suppose I do have artboard here. Okay, I have created this artboard. Now I want to actually check this particular artboard to four size here. You guys can see. If I just zoom out here, you can see now I do have a artboard, four size one. Okay, What I can do is I can come to this selection tool from here. Again, come to the Artboard option from here. I can just bring this one somewhere here. Okay, Maybe I'll select and again put this one right here here. I will also check all these files from here, Okay, This is how you can basically work around here in this particular workspace. I'll delete this one. Okay, I will delete this total page over here. Okay, I'll delete this. I will just put all these icons here on my artboard. Okay? I don't want that particular color, but I just only want my artboard. In that case, you guys can do all of this. Once we move deep into our class, we guys will get to know a lot about all of this. Okay? I will just come here. I will also tell you guys about group grouping and everything in detail. Okay, I have group this one now. I can bring this all together. I'll just group this one as well. And I will be able to move this one altogether now. Okay, here you guys can see if I selected this, now I am able to move this one altogether. This is how we can basically work. Suppose if I select this, if I want to do grouping, I can also do that. Hope you guys have understood this class, okay? The introductory of how this actually works and hope you guys are familiar with this one now. Okay, before going, let's see a few of the libraries from here. Basically, you can create your own libraries from where you can upload your own work and also share it with the Adobe Illustrator designer community. From here, you guys can create your own library if you want to explore the library from where you'll get to see different works from different designers. So you guys can click here in the Explore Libraries option. And you guys will be here in this Adobe Cloud, okay, like the Creative Cloud page. From here, you guys can check out different works. If you want to see any three D colors or anything, you guys can see here. Okay. So there are many things which you guys can do in this illustrator. So we'll start with all of this, and this one is the layer. Okay? Basically, under layer we can work around. Okay. Suppose from here, if I don't want to see this particular group, I can just click on this one. If I want to see them again, I can also select this. Okay? This is about this particular class, okay? And hope to see you all in the next tutorial where we'll be doing something practical, okay? As I've already shown you guys about this shape tool, okay? So here you guys can see I do have different shapes. So in next class what we're going to do is quite interesting. We're going to see how we can actually create or draw with shapes and lines. Okay, so we'll just make shape and we'll also try to make some kind of design with all this tool. Okay, so hope to see you all in the next class. Till then, take care and goodbye everyone. 3. Build shape in illustrator: Hello everyone, and welcome you all to another chapter of the Adobe Illustrator Essential Tutorial. So now we are on our chapter number two. Here I'll be showing you how to draw using shapes in Illustrator. Okay? So in our first chapter, I have already showed you guys how you can actually use those tools. Okay? But here I'll be making some shapes or some kind of drawing, using only the shapes. Okay? I'll be telling you guys what all you guys can do with those shapes, how you can actually change the ages, how you can actually change the sharpness and all of this in detail. Okay, so let's not waste time and let's get started with our second chapter of this tutorial here. As you guys can see, I'm here in my home page of the illustrator. Okay, So now what I'm going to do is I'll come here and I will open a new file. Okay? So here what I'll do is I will just take a letterhead. Let me search for a letterhead from here. Okay? So here I'll take this particular preset. And I want my orientation to be horizontal. Okay? Right now I don't need only one artboard. And I'll also put some blade here. Okay, Maybe I'll just type from here 0.125 Instead of this, I'll choose inches. 125. Yeah, I'll save this particular thing from here. And here you guys can see I do have my page, okay? This is the basic work space where I'll be working here. I'll be showing you guys how to use this particular tool, okay? This is basically the shape tool. First, let's see what all options we got here. Here we can create a rectangle, a circle, or an ellipse. And here you can also see the shortcut keys for both of this. For rectangle it's aim from our keyboard for ellipse is just L, okay? We need to create polygon from here and also a star from this particular option. If you want to create a line here, you can create a line. Otherwise you can just click on slash from your keyboard. Okay? Now what I'm going to do is I'm going to make just a basic design on Owl. Okay? I'll try to make using some shapes and Owl. Let's see. And also I'll be showing you how to make a tree. Just give some cartoonic view. Okay, we'll see that here now. To create a now what I'll be doing is I'll take a ellipse tool from here if I try to make ellipse okay, if I just give one click here on this particular layer, after selecting from here, basically I can select the width and the height. If I want to unlink this one, then I can unlink this spot as well. Then I can put some different number here, different number here. But if we link it, we will need to change it accordingly. Okay, from here I can check my width and the height. Otherwise, what I can basically do is if I come here, I can just create a circle just from dragging here. Okay, If I just drag in, I'll just click out here. You guys can see I can make a circle. I can also play around with the circle as well. Okay, from here, basically I will be creating a circle. I'll be creating the head of the owl here. I will select this one with my move tool. What I can do is I'll keep this one here every time after creating its shape. I'll just click here. Outside again, I will come here, the Elipse Tool from the Elipse tool. What I'm going to do is will create another shape. I will just create another shape here. Okay? So I can create it like this. I have created this one again with this particular tool. I will select this one and I'll delete this. Okay? But here, suppose I want to create any kind of circle or any kind of shape proportionally. In that case, what I can do is I need to click on Shift. And then if I create a shape here, you can see the size. It's quite proportional, okay? This is how you can create a proportional shape. I'll create this one here with my move tool for now. I'll just move this to one side. I'll bring this particular shape here here. As you can see, I do have my shape, but what I want is I want to make the body. This one is basically the face. What I can do is now I will just move this word backward. In that case, what I'll do once I'm here, I will come to the arrange option. Then from arrange option, you see I do have all these options here. I'll click Consent To, back here. Now you guys can see how this particular shape looks, Okay? This is that. Okay, now from here what I can do is I will just make the ice of this particular owl. So I will select on this end and I will decrease the size as well. Okay, So I'm going to make the, I will bring this one here and I will also duplicate this layer by just clicking on old here. You can see I do have this, okay? I will just this layer and I'll move this one somewhere here. And I will actually rotate this one again back. I will just rotate this and I'll again bring this to the same size. Yeah, this looks good, Not that bad. Okay, I will just adjust this one. I'll select this and I will basically delete or what I can do is I can just decrease the size of this again. Okay, I will just come here and decrease, decrease the size. With shift, I'll select this layer and I will put this one here in the center. Okay, again with my Alt, What I'll do is I'll click here and I'll bring another one right here. Okay, here, I will break this one here. I do have this. Now I will select this layer. And what I can do is again, go to Arrange option, and I'll click on Send to back here. I will select Send to back here. I will just delete one. I'll just delete this here again. What I can do is I will bring this one somewhere here just to see what I'll do. I'll come to a Windows, I'll always try to select or not from Windows. What I can do is come to the guides option here. In the new version or this particular window, they do have this option in the sides. Okay, The property S panel. But if you're using later version or the previous version, then in that case you guys need to come to the windows. Then you guys need to go to this option on top, okay? You need to go to the workspace option for workspace, you need to go to the Essentials Classic, okay? You guys need to do that Now, as I will just deselect this one here, you guys can see if I just make another circle. Okay, Suppose I made this particular circle. I will shape this one as well. Now I will just decrease the size from here. Or I'll just delete this one for now. Now click on Shift. Now here you can make an with the selection tool. I'll bring this one. I'll bring this one here. Okay. Now what I can click on is I can go to arrange and send to back here. I do have this. Okay. I'll just go back here. I do have this one. I will just delete this as well. Bring this one on top of this layer and make another circle. Okay, I will just make a circle. I'll click on Shift and I will create a circle here. Okay? I'll just cancel this one, select this, break, this one on top of this. Okay. Here you guys can see I'm done creating the ice from here. Okay. If you see, I can also select all of this. Okay. I do have this. Maybe the size is not that great, but I can actually show you guys how it is. Now what I can also do if I do have other things in my shape tool. Okay, Here you guys can see I do have the rectangle tool, I do have the polygon tool. Okay? Here if you just click on the polygon tool and if you try to make first, what will happen is by default it will come to hexagon, okay? You guys can change that one just by clicking on here. And here they're asking you that how many sides do you want? Okay? If I do want a triangle, what I can do is I'll select three. Okay? I'll click on three here. You can see I do have my triangle. Okay. Now I can also decrease the size of this one. Okay, I'll just some design here. I will just bring this one with my cursor here. I will just bring this one. I'll just bring this one, maybe I will just rotate this and put this somewhere. Okay. First what I need to do is I need to rotate this from the sides. Okay. Here I have selected this and I will keep this one somewhere here. Okay. I'll also copy one shape from here as well. I'll keep this one here. This also I'll. From here. And I will rotate this one. I'll just put this one here. Now what we can start doing is we can start putting some colors here. Okay, let's try to put some colors. Once I have selected this one here, you can see the fill option. Okay, I'll come to the fill. If I just want to give it some yellow color, I can give yellow color to that here. I'll come to the fill here and I'll also put up yellow color. Okay, I do have the same color here. If I do want to add some stroke, I can basically add some stroke weight from here. Okay, I will add some stroke here. And to this one also, I will put the same setting. Okay, here. As you can see, I do have that. And now I basically want this one backward. Okay? I will select this layer and also this layer, okay? I'll select both of this, but okay, let me do it one by one. Arrange, sad to back, okay? Select this one. And also go to arrange option and go to send to back. Okay. Here, if you guys are selecting any other thing from here, okay. So you guys can actually do that if I come here or if I select this. Okay, I will choose this one again. Go to arrange send to back here. You guys can see I'm sending this one to back here. I do have it in my back now. I'll come to this layer and I'll fill this one with black color. The same goes with this. I'll also put this one as a black color. Okay, Yeah, this one is looking quite good here. Again, what I'll do is I'll take this one. I'll just click on here, and I want three sides. Okay? Here as you guys can see, I will just make a triangle. Okay? I'll just make one triangle from here. I will just shape this one. Okay? I'll rotate this how you can basically rotate from here. Okay, I will rotate it like this. And I'll also duplicate a layer from here. Select the selection tool, and I do have two, and I'll take another one here. Okay, Now what I'm going to do is I'll select this and I will just decrease the size of this one. And I'll just put this one here. Okay? I'll put this one somewhere here. And now with this one, what I can do is I will this, I'll just rotate this one a bit. I will do this one again here. This one is basically almost the same side. I'll just make this part from here, okay? I will just keep this one beside each other. I do have this now. Okay. Now what I'll do is I'll create another circle. Again, go to the ellipse tool. Now I will just create a circle somewhat like this. Again, bring this one from here. Now I will just put this one somewhere here. Now what I'll do is I'll select this layer. I'll go to arrange, and I'll send this one to back. Okay, here you guys can see I can actually adjust this one from the back layer. Now what I can do is I will select a particular layer. I'll just go back here. Okay, suppose I will select this particular layer. Then I can put any color which I want. Okay, If I just put orange color. And here if I come and if I fill this layer with any red color, suppose I have selected the red color here and the face, I will give somewhat this color. Okay? I will give this color here and I'll give this one also as yellow. Okay? I'll fill this one. Yellow eyes are fine. I'll give the legs some different color as well. Okay. Maybe I'll just put some sky blue green color from here. You guys can actually go to that main file as well. Okay, here you guys can basically do some color mixing. Okay, if I select this one, if I click on this, I can actually paste this one here as well. Okay, I will just copy this one from here. I'll come here and I will paste test. Okay, here I can just adjust this over the layer or come here and replace this one from here. So I'm just showing you guys everything in detail over here. This is how you guys can actually create different shapes. Okay. Now if I come here again, okay, if I want to draw some lines, I will be also able to draw some lines here. Okay? So here I do have the lines option from here. If I just click on here here, you guys can see this is how I can create lines. I will just duplicate this layer. Suppose if I come click on All from here. Again, I will bring one from here. From here I'll just move this, delete this layer. I'll just select. Okay, only this particular line. I'll click on this and I'll create another line over here. This is how I can basically create a line if I select all of these lines from here, okay, I can basically change the width of this particular line from here. As you guys can see, you guys can do that in all this particular layer. Okay, Maybe I'll just change this one as well. Okay, I will just increase the width to five. Yeah, this one is fine. Yes, this one looks quite good. Okay. From here, basically you guys come and you guys can also make some stunning designs. Okay, I'll just create few of the stars here. From here, I'll create some star here. I will create some things. Okay, I'll create here as well. I'll create all of the stars here. Okay, I'll just select all of this. And what I'll do is I'll just change the fill color. Suppose I'll choose a different color in this one. Okay? I will take a different color. I can't keep on changing the colors. Hope you guys are understanding what I'm trying to teach you guys here in this critical lesson. Okay, here in the stars. As you guys can actually take your work. Okay, here, you guys can use different colors. And also you can add strokes. Okay? Here if I want to add stroke to this particular thing, I can also add stroke as you guys can see. Maybe I'll just take this one somewhere here. And this color, I will choose something different. Okay? Maybe something in yellow. Okay, This looks okay. So I hope you guys have understood this particular class here. I just want to create one line here. Okay? Again, using this particular tool over here, or this shape tool from here. Okay? I will select the line line, I will be creating a line from here. Okay? Maybe I'll just create a line here. Okay, I do have a particular line here. Now what I can do is I can basically change the stroke. Okay. If I select this layer, I will be able to change the stroke from here. Also, if I just select this particular place now I can add a different color. Okay, Suppose if I just add a different color, I can also add this one. But what I'll do is I'll click on this, go to Arrange first, and send to Back. Okay. So here you can see now this one is just back side. Okay. If I come here, select this, I'll click on this one. I'll extend this one to here. Okay? So you guys are understanding this class, Okay, so here, let me just make another tree from here. Okay, So for that I'll come again to this polygon tool. I just click here. Okay? What I can do is I'll just select three sides. I'll click on. Okay, From here you guys can basically see I do have this one, I'll just create a shape like this. What I'll do is I'll also duplicate few of this from here. Okay. I will click on At. After selecting this okay, I will click this one. And I also want few more. Okay. I can click like this. Suppose I'll take another one, okay? From here I will just click this one. And I will have this here as well here. I will create this one as the main thing. Okay, From here, just move this one somewhere above here. What I'll do is all of these extra things, I'll just actually change or decrease the size of all of this. Okay, I will just click on Shift, select this one, click Shift. Now I am able to change this size from here. Okay, I will again come here and click on Shift. And I will change the size of this ones as well. I do have this size one. I'll select this shift and I will decrease the size from here. Also click on this one, click shift and decrease the size. Now what I'm going to, I will just put it around here. Okay? All of this. Will select this one. First I will try to rotate this. Okay? I'll just try to rotate this from the sides. Okay? As I do here. Okay? I will just try to rotate this. After rotating, what I'm going to do is I'm going to put all this here. Okay? I'll put this one here. This one again. I will now, I will also try to rotate this from here. Okay? I do have this one. Bring this layer from here, okay? And select this here. Okay? So I'll just use this also. If I just rotate this as well, suppose if I just rotate or select this first here. As you can see, I have created this already from here. Now what I can do is I can basically click on all these things here. Now I can actually go to Arrange and I'll click on Sent to Back. Okay, here it is, Just sending this one to back. I can also do the same here. Okay, here, I just select this particular layer again. I'll just do this one as well from here. Okay, I'll go to range and I'll send to back again. Select this. What I'll do is I'll select this whole thing from here. Now I'll just add a color. Suppose I'll take something in green. Okay, here you guys can see that I do have this thing here in the green again, go to range and set to back. All of this I have here on back. Only most of it, Only this one I need to arrange and set to back. Okay, This is how it basically looks like. Okay? As you guys can see here, select this particular layer. Suppose I have selected this layer, and I can actually put this one wherever I want. Okay? This is how it can actually look. If I again, come here and get one ellipse, two, I'll just create an ellipse from here. Now again, select this one and put some green color. Okay? Or just put some red color. Okay, If I just put this one here. Okay? After that I will just click on this, go to arrange, and send to back. Okay. This is how it basically looks. I can also put these colors here as well. Okay? Or if I want to just put it somewhere here or totally like this, you guys can do it as well. Okay. Here. This is one way of how you can actually work around with shapes and make different type of designs as well. Okay, in next class we'll learn about how we can use the shape builder to in Ollraor, how we can basically draw using the shape build two. Okay, Take care of everyone and goodbye. See you all in my next chapter. 4. Using Shape builder tool: Hello everyone, and welcome you all to another chapter of the Adobe Illustrator Essential Tutorial. Now we are on our chapter number three. Here I'll be showing you how you can use the Shape Builder tool. Here we'll be using the Shape Builder tool also. I'll be showing you guys how you can actually design or put shadows. Okay, I'll be showing you all of that here in this detail, in this particular class. Let's not waste time and let's get started with this class now. As in my home page of the Illustrator now I'll open a new file from here. Okay, I'll take basically this letterhead only, but from here I'll change the orientation. And everything else is fine. I'll click on Create. And now it will create a workspace for me. Okay? From here now I will be selecting for rectangles, okay? I'll click this one here. Okay? I will add this L here. I'll just overlap this one here. And I'll again put another square or rectangle box over here. Okay? I'll just create a rectangle box with my selection tool. I'll select this one. I'll move this one somewhere here. As you guys can see now here I do have four options. Okay? Basically here you guys can see that this is showing me the alignment. Okay, here, the peak line. This is showing me alignment that I'm in the same line or not, okay? From here, this is basically called the smart guide. Okay? If you use the Smart guide, you guys will be able to use this particular option here. As you can see, this is the smart guide. I have turned it on to see. Okay. So now here I do have that particular option. Okay. So this is the Shape builder option. Okay. So this is quite cool. I'll be showing you guys by using this one. Okay? Here as you guys can see, I do have my mouse. Okay. And I have selected the Shape Builder two. Now what I can do is I'll just click on Shift or I'll just click here. Oh yeah. Before that what I need to do is I'll take my selection two and I'll select all these particular shapes. Okay, so here you guys can see that I've selected all these shapes which I have present here. Now I'll select this tool over here. And now you can see that I do have a plus sign in my cursor. Okay, So you guys can see and it is choosing parts separately. Okay? This is how this is. Okay? Now, if I just want to make this one particular box, or suppose I want to make this particular place, a particular box. In that case, what I can do is I will select this tool from here. I'll just hold on my mouse and I will just bring this here. Okay, here you guys can see I'm bringing the mouse here. And now see if I come here and if I click outside. And now if I want to move again, I'll just move this one here. You guys saw okay, how I did that one. Okay, I can create different shape here as well. Okay. Again, select this whole thing here. Now, select again this shape builder two. After selecting, you guys can choose this part. Okay? Suppose I want to just choose this part. Okay? Here I have created another box. I'll come here. Okay, I will just select this one. This is how I can basically create if I want to create any other shape. Again, suppose I will select this one. I can also do that. This is how you guys can actually start creating or making your own shapes. Or I will just select this from here. Select all of it. Okay, I will select all from here. Now what I'm going to do is, again, select this tool, select this one. This one here. Now, again, I'll move here. You guys can see I can also move this one. This is how you guys can basically create different type of shapes. Okay, from here, using this tool, you can actually move around the paths. If you want to move around any path, you guys can select that one. Okay, I'll come again to the selection tool and I can actually save this one if I want. Okay. This is about all that. Okay. But now I'll be showing you guys how you can actually put any shadow. Okay. For that, I'll just close this file. I'll click on Yes. From here what I'll do is I'll come here, I'll go to open and in last class. The work which we did, we will open that. Okay, This one we did how to draw with shapes. I will open this particular panel here. You guys can also see that I have added some color here. Okay. Here, if I select this layer, I do have this one, okay? But now what I'm going to do is I'll just send this one backward. Come to the Properties panel, go to Arrange option, and I'll click on Sent to Back. Okay? Now I do have this one at the back. Okay? As you can see now all I'll be doing is I will now select this particular layer and I want to add some kind of lining and some kind of shadows here. Okay, first let's try to put some shadows here in this particular area. For that, I will first take the line tool from here. Okay, I'll select this slide tool from here. Suppose I want to put the line somewhere here. Okay? In that case, what I'm going to do is first I'll come here and create one line. Okay? What I can do is I will just create a line here. Okay? Basically, I will just try to zoom in a little bit. I want to add a line here, because I want to add some shadows for that. Here you guys can see, I am trying to add a line here. Okay, I'm trying to add a line. And here you guys can see, I do have added this line as well. Okay. Now with this particular tool, I will select this particular line underneath that. I'll select this one as well. Okay, with Shift, I will click on this, and I'll click on Shift. And I have selected this layer as well. Now what I can do is I will come here in the Field option. From my Field option, what I can do is I can select different colors. Okay? Suppose I want to take an orange color. Here I have selected the orange color. But here I will change this one here. Okay. Maybe I will put it somewhere, 12 or 15. Okay, I'll put 15 out here. What I'll do is I'll click on Enter. Okay, here I have selected this one here, and you guys can see a slight change. Okay, again, if I select this layer and also clicking Shift, if I click on this layer, come here also, I will just decrease the color. White from here. Okay, I will the color, but the total color here is changing. That means that I do have some problem with this layer here. Okay. Suppose if I just come here, I need to intersect all this part. Okay? I will just come here. I will delete this from here. I will select another line. Okay? I'll just select this particular line from here. And I'll keep this line. At the same time I will, I will click on this, click on Shift and this layer. Okay, I've selected both of this layer and now I'll change the fill color. Okay, Before that, select this, now I do have the two parts. Okay? From here I'll come to the fill option. From here. Basically I can change the color. Okay? If I select this color, I want to add some part to it. Okay? I'm trying to put some colors here. And I'll click on Enter. I'll click okay. From here you guys can basically see, I have changed this background color here. Okay, If I j out here, you can see I have changed the particular color somewhere here. Now if I again come and go back, select this layer. Now remove this color as well. Now what I'll do is I'll select this layer. Also with Shift, I will select this layer. Now come here to this Shape Builder option. Now here you guys can see I do have the appearance, okay, I'll come here and I will take this orange color. But again, I'll do the customs option. From here I will just write 15. Okay. I'll click on Enter from here. And here you guys can see I. In which particular part do I want that color? Okay, I'll choose this one here. You can see I do have a change in the color in this part. Okay? Same. I'll come here and I'll also do the same thing here as well. Okay, that again, I'll come here, I'll select this particular line. From this particular line, I will create a line here. Okay? I'll create this line. After that, I will select this particular part. Okay? For that what I need to do is here, you can see I have created the line as well. And now I will come here. Before that I will select this layer and also this one as well. Okay, with my shift, I'll click on this one. I've selected both of this. Now come to, again, the Shape Builder Tool. From the Shape Builder tool, you guys can see I can actually take this particular thing from here. Okay, I will select this panel only. Okay, for that again, I will come here, go back, select this one. Also with shift, I will select this layer, and I have selected both of this layer from here. Okay, now I will again select and select this layer on top. Now from here I will just select this particular part. But before that, come to the field option again, from here choose a particular color. I'll just take this yellow again, Come to this swatch, and from here just put 15, okay? I'll click Enter here, and I'll select this part here. You can see this swat is quite dark. Okay? I'll select this one. Suppose now I will again select the selection tool here. This one over here. I will just delete this part. Okay, again, select this path over here. And delete this one as well. Okay, I'll repeat the same thing in all these layers as well. Okay, again, come here, make a line. I will just create a line from here. And I have selected this particular part. Again, I will come here and select this layer. I will select this line as well as I'll click on Shift, select this path as well. Okay. Now what I'm going to do is I will again come to the option here, go to Phil. And from Phil I will choose a color. Okay? As this is a red color, I'll choose this one. Come to this watches, and here put something around 20. Okay, I will put 20 here, and I'll click on Enter Here. You guys can see if I just choose this particular shape here, I have that color. Okay. Here, as you can see, I do have this layer here, okay? A layer of color. If I just go back again, I will come here. Maybe I will just decrease the intensity down from here. I'll just move this color around and I want to get it somewhat pink or somewhat this color. Come to the swatches red color. This one here, you guys can actually see or view the color. Okay. If I just want to make it in the darker part. Okay, I can make this color as well. Selected this one. And I'll click on here. And here you can see the change in the color as well. Repeat the same process, how many times you want. Okay, again, come and select the selection tool. Select this particular part. Delete this one. Okay? I'll not take this whole thing. I will just select this part from here, and I'll delete this part. Okay, here you can see the change in my color. Again, with this selection tool, I will just select only this thing here. I will try to actually select all of this from here. Okay? As I do have this color, then I will again come here, and again, I'll create one line. Okay? Suppose if I just create one line from here. Okay? And I will select this part again. I will select this part. And also with my shift, I will select this path as well. Okay, I've selected this path as well. Now with my, this tool, I will come and go to the fill option. From the fill option, maybe I'll select this color. Okay, Now I will change the intensity from here. I will take 15 and I will click on Enter. Or I'll come here, maybe I will just increase this color a little bit. I'll just make it quite darker compared to the other one. Yes, this one is now identifiable. Okay, I will select only this layer and here you guys can see the change. Okay. Now again come to the selection tool. And with the selection tool, I will just this particular place, I can delete this one. Okay, you guys can do this as well. I'll select this part. I'll delete this. This is how it basically looks as you guys can see. You guys can repeat this particular process, how many times you want, if you want to select this part right now, you guys can select this part as well. Suppose if I want a different color, I can take a different color from here. Okay, I hope you guys have understood this particular part here. You can see I do have so many layers. I've shown you guys how you can add a shadow as well. Okay, I hope now you guys can work with the shape builder to. This is something quite interesting how we can basically do that. I can also import the color. The way I have showed you can basically select with my selection tool if I do have this one selected. And now if I directly select some color, suppose I want some different color here. Okay, I want it quite dark here. If I select this one here, I can change the color as well. Okay, These are the changes in stroke. I don't want any stroke. If I just select this one now, come out here, You can see the difference here, okay? This is what about this particular class, and hope you guys have understood this class here as well. Okay, I'll just try to this and keep it aligned here. In this particular class, I have only showed you guys how you can add some shadows or modify your image. But in next class, I'll be showing you guys a project on how you can draw with the Shape Builder tool. Okay, Here I have only used the shape to fill in some colors and give some good effect here. But from next class, we'll be learning how you can actually make one total design. 5. Draw with the shape builder tool: Hello everyone, and welcome you all to another chapter of the Autobe Illustrator Essential Tutorial. So now here we are on chapter number four. And I'll be drawing with the Shape Builder tool. Okay? I'll also show you how you can actually create different styles. Okay, so this class is not going to be that long. I'll just show you guys how you can work on and also make different type of design. Okay, But your design totally depends upon you. I'm just showing you guys how you can actually use this particular tool in Illustrator for creating stunning designs. So let's not waste time and let's get started with our chapter number four here. So now as you guys can see, I'm here in my home page. Okay? So what I'm going to do is now I will be creating a new file from the new file, I'll take the letterhead and the orientation is also fine. It will create me a work space here. Now, first thing first, what I'll do is I'll come here in the Shape tool option from the shape tool, I'll be taking circle. Okay. Again, come to the selection tool. What I can do is now I will just duplicate this layer. Again, I'll duplicate a little more of this. Okay, maybe I'll just duplicate five layers like this. Again, select this tool, just it on top of another one. Now what I'm going to do is I'll just tag this one up somewhere here. I want to make some shape. Okay, I'll be creating this one. As you can see, I have selected this layer, now let's try to create one from here. Okay, with this, I will select all these three layers. Now once I've selected all these three layers, what I'll do is I'll select the Shape Builder Tool here. As you guys can see, I have selected the Shape Builder tool from here. Basically see which all layers I want to basically merge together okay that I get a good shape. In that case, what I'll do is I will just delete these two layers from here. For that, again, I need to click on Alt, and you can see it changed to Minus. Okay, basically I will just go back again here. I will select Al, and I will bring this one to this layer here. You guys can see I don't have this one now. I have deleted this layer. Again, what I want is I want to merge both of this here again, click on this one and drag this one here. And here you can see that I do have this layer and I want to march this layer as well. Okay, I do have this layer, and now I will merge these three layers altogether. Okay, again, click on this one. Bring this one here, and also this one. Okay, here you guys can see. And I'll select this particular layer. And what I'm going to do is I'll click on A. I'll select this layer, and they don't have the layer anymore. Okay, Now from this one, okay, If I come here again to the selection. If I want to put out any particular shape or if I want to give shape from here. Suppose if I want to give a shape like this to this part. For that again, I will come here, I will select all of this here in this layer. Now again, come to this option Shape Builder to with the Shape Builder tool. Again, what I'm going to do is I will select this layer and this layer I will merge both of this layer here. I do have this and this. Now again, I'll bring this one. This one, I do have it here. I will select this, I will select this layer, and I will click on this. Okay, now I do have this layers and I'll also merge this one with this. Okay, Here you guys can see I have created a particular shape here. Okay? Now, again, if I select this one, we need to keep on repeating. If we do want any change here, okay, We just need to keep on repeating this one. Suppose I will come here again. Now, from here, what I want to do is I will select all of this. Okay, I have selected all of this from here. What I'm going to do is I will select this layer, this shape tool. Again, select this layer, this layer, and this one. Okay, here you guys can see what I have made here. Now I will select this layer with this one, and this one with this one. Okay? Here you guys can see that I do have a particular shape here. Okay? Now, if I want to put up a cut here, suppose I will take this particular thing. I'll come again here. I will create a line from here. Okay? I will just select. This particular line somewhere here. Okay, so I've selected this layer, now again, come to select the whole thing. Okay, I will again come to the selection option. Select the whole thing from here. And now again select this option, the Shape Builder tool. Okay, I will select this one. I will click on a, select this layer. Now I don't have that layer anymore. Okay, Now again, selection tool. This particular layer, what I'll do is I will that one, Not the whole thing, only this particular thing here. Okay, I will just select this particular layer and I'll delete this one. Okay, This is how you guys can actually make some shapes here. I do have a shape here. I will select this layer now, I can also rotate this one the way I want. Now. I will put this one here in the middle. Or if I want to give some good shapes, I can also give this guys some good shape here. Okay? Suppose if I again select some box squared from here. Okay, I will take a rectangle from here. Now what I'm going to do is I will come here. I want to basically marge this one. Okay? Select this and keep this one somewhere here. Now, I want to march this one with this. Okay? I've selected this again. Select the total thing from here. Now with this tool, you guys can see which part I want with which part I want to all from here. Okay, here I have created another shape. Likewise, you guys can create different type of shapes. Okay, If I again come here, I will take the rectangle box. I will make some rectangle boxes here. Okay? Maybe I will also draw some lines. I will come here again, take this polygon from here. I will select, okay, again with this tool, I will select this one here. And I'll also try to rotate this around. Okay, I have rotated this. I do have this layer now as well here as you guys can see, I do have a different layer. If I want to cut any part, I can do that as well. Okay, I do have this layer, this layer, and this layer as well. And from here, what I can do is I will just decrease this radius from here. And this one's radius as well. I will try to decrease the radius from here. Okay? If I just want to rotate this, I can rotate this as well. If I want to change the radius, I can also do that if I have selected only one shape. But this is the combination of different shape here. I won't be able to do that if I want to just change only one part. Okay? Suppose if I just want to change only this radius for that, what I need to do is I need to come here and I need to select this layout, okay? From here I will select, and I will select this part. I'll keep this here, I will select this thing from here. Or just come to this radius option from here. Also, you guys can do this, okay? These are a few of the good things which practice on a regular basis, okay? Guys can actually use all of these options from here. From here I can change the radius, okay? And if I come again here, I can do that as well, Okay? Now if I am selecting this one, okay, so if I'm just selecting this one, sometimes it's quite hard to select. I have selected this layer as well. Now I will bring this one here and I will just draw some things out here and also duplicate this layer. And I'll just put this one somewhere here. And this one I will just rotate a little bit and I will put one here. Okay, so this is helping me for alignment. Okay, Right now this one doesn't look that great. But now I'll just fill this one with color. Or first I will just make another rectangle box. Okay, I will select this layer, I will just create this particular box here. And I'll fill this one with a different color, maybe something in brown. Okay, I have selected it in brown color. What I'm going to do is I'll just lighten this one up a little bit. Okay, I'll just put this one. And also on this verge. Okay. I'll keep this one like this and this one is applied. Now what I can do is I will go to the Range option and I will go to send to Back. Okay. Again, come to this option here. Here you guys can see I do have all these things here. Okay? I don't have all these tools. I'll just align this first. Okay? Now I will just again, select this one here. I will just send this to back, send this backward. Send backward. Okay. I do have those layers as well. I can just put aside all these layers and maybe select this particular layer. Suppose if I select this layer, what I'm going to do is I'll bring those layers on front. Okay, suppose I have selected this layer. I'll come to arrange and I'll click on Bring Forward. Okay, I have brought this one forward as I do have this layer At the same time, I will select this and I'll go to Arrange forward. I do have this layer forward now as well. And same goes with this one. Okay, I will come here, select this, select this particular layer. Go to the property spanel range and bring forward, I do have this layer as well right now. Okay, everything I do have here now, I will add color to this one. Come to the fill option from here and select a different color. Suppose I want it in this color. I can also change the intensity. I have changed this one. Come to this one and come to the fill option. From the fill option, you guys can take some different colors. Suppose yellow also, I will check or create the yellow accordingly. Okay, I do have this come to the fill option. Go to the swatches from here. Again, choose this green color. Okay? Choose this color from here. And now, with swatches, you can actually maintain the color from here. Okay. If I want to get it somewhere here, I can get it somewhere here. I will now add color to this particular shame. Come here and add some color according to yourself. Suppose if I want something in red, but I don't want that red, in that case, I will just decrease the color intensity. Again, select this layer, go to feel and get some color work done. Okay, suppose I will select this one. And now I will just ease down the color a little bit from here. I will ease down this as well. Okay, here I do have the whole layer ready. Okay, so this is how you can actually make shapes or draw with the shape builder tool illustrator. Hope to see you all in the next class. In next class, what we'll be learning is I'll be showing you guys how you can actually draw a custom logo shape with illustrator. Okay. Take care everyone. Until then, take care. Goodbye. 6. Drawing with the curvature tool: Hello everyone, and welcome you all to another chapter of the Adobe Illustrator Essential Tutorial. So now here we are on our chapter number six and we'll be learning how you can draw with the Curvature tool. Okay. And also I'll tell you how the Curvature Tool is used in the Illustrator and how you can make different type of design. And with that I'll also tell you how you can group all those elements in your box. And also I'll show you how to put colors on all those things and actually move that particular design from place. And also how to scale it down. Scale it up, and most importantly, to correct some shapes or sizes. How you can also select or how you can use the direct selection tool as well. We'll be learning each and everything here in this particular class, so let's not waste time and let's get started with chapter number six on Curvature Tool here. As you guys can see, I am in the home page of Illustrator. Again, I will create a new file, the latest size, maybe. I'll just increase the blid from here, and I will create a particular workspace from here. What I'm going to do is I'll just create some of the waves here, okay? And also a sun. And also I'll try to create few clouds for that. First up, what I need to do is maybe I need to come here in this curvature tool option. Okay. Here as I do have the curvature tool, I'll select this particular part from here. Now I will click here. Okay. As I do have this now, I will try to create some waves from here. Okay, Suppose I will select this one here. I will try to create some waves. Okay, I will select this here. You guys can see I am creating some waves here. Maybe from here. If I do any mistake, by the chance. In that case, what we can do is we can just come back. Suppose I do want this, then I can just click on Delete again. If I select layer, I can make that as well. Okay, I'll select this one here. You can see I can also extend this curve. Suppose here I will select this. I will click out somewhere here. This one. Okay. I will again, this one from here, or just go back. I will try to use the curvature tool from here. Again, I'll come, you can see there is a particular curve here on the lines. Okay. Basically using this, I can create some wave thing here. I have created this particular layer as you guys can see. Now I will select my selection tool. What I'm going to do is I will actually try to give some smoothness to this layer. Okay, maybe I'll bring this layer here and I will zoom in. Okay, control plus, now I will show you guys how you can work with the direct selection tool. Okay, I'll bring this one here. And as you can see, once I click on any anchor point here, you guys can see I can basically change those from here. Suppose if I take this particular layer from here and I want to do some change here. Okay, here, the direct selection tool is being selected. Come here from here. Basically, what I can do is I can select this layer and I can give some smoothness from here as well. Okay, here as I am using this particular tool, somewhere here. Okay, maybe I will just give some touch here. And also to this layer I will able to give a curve somewhere here. And again, select this tool, I'll also give some touch here here as well. Okay, I will just try to give some curve here. If I just zoom in a little more, I will be able to see these points more properly, okay? Now, if I choose this particular point here, you can see all this mark, okay? Basically I can actually work around. Or take, if I keep this one here, select this layer, select this handle. From here, I will just maintain. One. Okay, here, I'll keep this one Now, I will just move with my hand to, okay, you just need to click on shift and you can actually go around. Okay, You can check this particular layer. Suppose if I want to change anything from here, I will come to this particular handle and I can basically change this one. Okay? If I take this one somewhere on top here, as I do have, I can take this layer and I can just move this one down. Okay, again, select this from here. I can select this point. Okay, so I will select the point here. Again, I will just decrease the size. It might take some time for you guys to master this one, but it's none of a big deal, Okay, So if you guys do have the patience to work on with all of this, you guys can basically work with all of these options here, okay? So here I will just set the tone somewhere here to this point. I'll again here or I will just smooth this down. Okay. Yeah, I feel I am done with this particular wave. What I'm going to do is I'll select this one. Go to this selection tool now. I will copy this layer from here. Okay, so I'll click on old. I'll copy this one here. And another one I will copy somewhere here. Okay, maybe I'll just decrease the size from here. And I will just keep this one somewhere here. I'll keep this one here. This one I will select again. What I'll do is I'll just increase the width. Come to the property spanel, come to the stroke option and increase the stroke from here. And I'll also increase the stroke of this one from here. Okay, This one here as well. I have tried to create some wave. I know this one is not perfect, but just to show you guys an example of how this one is done. This one is not that. Okay? I'll keep this one somewhere here and this one somewhere here. Okay? I do have these layers. Now what I'm going to do is I'm going to draw a sun. Okay. For that, I'll select this one and I will create a light here. And I'll just decrease the radius of this. What I'll do is, again now what I'm going to do is I'll come here, select this tool. What I'm going to do, I will take this one, otherwise instead of circle, I will use Curvature tool. Okay. I will select this one here. I will select this somewhere here. Now here you can see I am in the mid, from the mid level. I will again come here and I'll select this one. Okay? Yeah, I do have this half here. Now, I can actually add line. I will be adding some line over here. Okay. I'll be adding some line here. I will add another line here. This one. I do have this slide here. This is the race. Okay, What I'm going to do now here is I will come again, select my selection, to select this layer. And just increase the stroke size. Okay, I'll increase the stroke size. I will give this one a color, maybe a yellow color. Okay, I will come and I will give some orange color from here. Okay, Maybe I'll take this one orange. Okay, instead of this, I'll go to the stroke and I'll select the orange color. I will select this layer again, the same color, I will put here here as well. Come to the stroke option. In the stroke option, select this color. Okay, this is how I'll be adding colors to it. Again, come to this stroke. In strokes, select this particular shade of color. And select this. This is how I'll be adding this color to my stroke here. Okay, just repeat this cross, this is how you guys will get the same product from here. I'll come to this line, from this line, I'll put this stroke color here. Select this, Come to stroke, select this color again. Come to this one, this layer, to this layer. Use this stroke the color. Okay? This is how you guys can basically start working and make your own colors. Okay, Here I do have this one, not that perfect, but it's not that bad as well at the same time. Okay, so I will add some time blue color. Come here to this one. Okay, Again, select this layer. Come to strokes from here, basically. If you want to take some color, maybe if I choose this color from here. Okay, so I can actually copy this number. Okay, I'll copy this one. And if I want to paste the same work here, what I'll do is I'll come to the stroke and I will just delete this one from here. I can just past this one. Okay. And I'll enter. And here you can see I do have this one. Okay. This is just a basic of what all you guys can do here. Okay, Now let me make another shape using this curvature to. Okay, I'll just click here, Maybe I'll click here as well. I will just increase the shape size. Okay, I'll just try to make a curve. Over here, something which looks like hat. Okay, From here I will just select, I do have a hat shape here. As you guys can see, I've done this. Now what I'm going to do is I'll select this tool from here, the Elipse tool. And I will create a elipse box here. And bring this tool here. Right now, I will select this on top of this one. Okay? I do have this shape here. Okay. Now what I'm going to do is select this tool. Okay? This tool, Yeah, shape builder tool from here. Now, using the Shape builder tool, what you guys can do is select this layer and this layer as well. Okay? First we need to select both of this. Now with this shape builder just cancel this one here. I will select this. Okay, I do have this one and if I want to go back, what I can do is I can just select these two layers. Okay. I can do that as well, but I'll just select the first one. Only what I'm going to do is now I'll again, come to this and I will change my stroke. Okay? I will change the stroke of all of this but the color, let that one be there. Okay? I'll just keep it one point. Now, I will add different colors from here. Okay? Come to this one, okay? Select this color from here. Suppose now I want to change the color of only this part over here, okay? In that case, what I'm going to do is I'll come here. And now I can take a different color and I can change this from here. Or I'll just change the intensity of the color down from here. This is how we can also make different shapes. Now if I, with my curvature to what I'm going to do is I will make a line here. Okay. So here I will just p a line, I will create a line from here. Okay? Yeah, this is that, this is how you guys can make some particular lines. Okay? Again, with this two direct selection tool, I can come up here, bring this one, select this particular points, this points, you guys can come up here, select this layer, inside this one, you guys can choose a different color. Suppose this particular layer I want a different color. Come to the field option, Go to this and select this one, okay? Now, I will just take two circles down from here. I will create this and I'll create another here. Okay? Now again, I will just create some circles, so quite small. Okay, I'll only duplicate this layer. I'll just click on Al. I will duplicate this layer, Change the color to black. Okay. I'll change this color also to black as well. Okay, come here again. Choose the black color here. I do have this color. Okay. I will put this one somewhere here. I have put this one here. This particular thing. I'll come again, select this one, and this one is in black already. What I'll do is I'll click here. Here you can see I have made a particular shape and you guys can also create different designs using the Curvature tool. This is one example of how you can use the Curvature tool and make your own design. Hope you guys have understood this class. Okay, I have within you about the curvature tool, how you can create stunning designs from here. And also about the direct selection tool after if you do have any problem in the curvature tool like you want to just smooth in any part, in that case how you can use that direct selection tool. Okay, so in next class we'll learn about how we can actually use a pen tool. Okay? So we'll learn about that in detail. Till then, take care and goodbye everyone. See you all in the next chapter. 7. Using the pen tool: Hello everyone, and welcome you all to another chapter of the Adobe Illustrator Essential Tutorial. So now we are on, on chapter number seven. And here we'll be learning how you can use the pen tool. Okay, so I'll be telling you guys how you can create points and from there, how you can actually make some curves or shapes according to your size. Okay, I'll show that. Okay, So let's not waste time and let's get started with this chapter here. So here you guys can see I am in the home page of Illustrator. Okay. So from here what I'll do is I do also already have an exercise file in which I'll be doing that. Okay. I'll be doing on top of that one, I'll come here in the opal file option and I do have a JP file here. Okay. So I'll take this exercise file from here and I will open, and now it will give me this page. What I'll do is I'll just lock this particular page and I'll be creating one new layer. Okay, I'm on top of this layer basically. Now from here I will be using this pen to, okay, there are different ways how you can use the pen. As you can see, as I do have my caps lock on. Okay, So I do have this cross sign. Okay, Once of the cap stock, I will have this can here. Okay. Let's see what I can do with this one. From here I can just make points. Okay. From here you guys can see I can make points here. This is how you guys can basically make some points. I'll just go back now. I'll use this pen tool. Okay? Again, without the caps. Okay? I have just turned off the caps as well from here. If I just on here you can. But with this one, this is how you can basically work, okay? You can just make some designs like this, okay? But if you click here, then you will get curve, okay? If you want to create curve, you guys can do that. And come here and join this one here. This is how you guys can create shapes here. Again, select the selection to delete this one. What I'll try to do is I'll try to draw on top of this layer. For that, I will basically use this one. Okay? I'll have this point here. Maybe once I come to this point, okay, I will just curve this one. And I'll keep this one here. Now I will try to make a line here. Okay? I'll click on this at beginning. You might take some time to master this one, okay? But once you do, it's quite good. Okay. You guys can actually use this. This is how you guys can make these shapes. I'll just complete this one here. If I want to make any shape I can make that. After that, I will here, I will just match this lines. Okay? Straight lines. I hope you guys know. Okay, but here we'll be learning about this. Here you guys can see how I'm basically working here. Okay, here you guys can see, you can just, if you just click on controls that okay. So you guys can actually get one step back, I'll as well. From here. Now you can make the shape. Again. Make this shape, okay. Here you guys can come, you guys can make the shape. I'll just go back a little bit here and I'll make the shape here. Okay? And again, come back here from this point. You guys can also make the shape, okay, this side. And now join this one directly here with the point basic at starting. You guys don't have to worry so much about all this. Okay, So you guys can just make anything, whatever you like. Again, I'll come and select the selection tool. Here you can see I do have a layer. Okay, Not exactly the same, but it looks like, okay, here if I select this layer, I'll come to the properties option, or before that, how I have created this ellipse tool. And I will create an here, again, I will create another small I here. Okay, I do have the two layers as well. I'll click on this layer here. Select this. Maybe I'll just give this a stroke, Okay? Here I do have a stroke of one point. Select this lay and bring this one here. Okay? So here you can see I do have bought this particular line here. Okay. So here I do have this. Now again, I'll come here, create another box. Okay? And I will bring this one with my selection tool somewhere here. Okay? So I'll put this one here, and what I'll do is I'll again, come here. Okay? Maybe I'll just move this one in one side a little bit, okay? I'll take this first. I'll come here in the properties option and I'll just give this one a bit. Stroke, okay, here. Now as you can see, I do have the stroke. I'll put this one here here. I do have another point. I'll keep this one somewhere here. Add stroke to this as well. It's easy for me to locate this again with my triangle. Okay? Now I can also create a triangle with my pin tool as well here. In this case, what I'll do is I'll select the pen tool, this normal one. Okay, we'll be using this one. I won't on the capsule from here, I'll just create a line line here. And I will just join this one somewhere here. Okay, here I do have one stroke. I will fill this one with the color. Okay. I'll come here, go to the fill option. I will go to the swatches, or I'll go to this one from here. Basically I can select what color do I want to put. Okay. As I do have this color right now, what I'll do is I'll just decrease opacity. I'll just decrease to this much. Now I'll click here Selection tool, And I will just rotate this one a little bit. Okay, I'll rotate this and I will put this one somewhere here. Now I can also feel color to all of this. Okay. As you guys already know here, I can come and select this one. Now if I just want to increase the size and I want to match this one. Okay? I can do that also, if I just put this one here in the middle, that looks quite good. Okay, I do have both of these layers just here. Okay, so what I'll do is I'll just group all of the icons which I have here. Okay, so for that I will just right click here, and from here you can see the Group option. I'll click on the Group option, and now I will be able to group. Okay, so I don't know what exactly happened here. Okay, I will select all of the icons. Okay, I will just delete this one again. Come here to the layers. Select this layer. Okay, as you can see, I don't have this layer. Okay, I'll just only delete this one here. Again, I do have this. Let's select all of this, Okay, All of these are selected. Now, click here. Click on Group. Okay. Now I can just move this one accordingly. Now if I come inside this one, and now I can actually adjust all of this, okay, here. I will just adjust this one somewhere here. I will put Able somewhere here. Okay. Another thing if I will just add another ellipse. Okay? This one I'll create using my pen to. Okay, for that I will click here. From here, I can also make some. After that, I will just come here and I will try to make some shape. Okay, here, I'll add here, basically. I will just join this one somewhere here. Okay. Here, you can see I do have a shape here, Okay. If I want to do any kind of changes, then I'll just in from here basically with the points over here, I can actually create those. Or if I just go back, go to my selection tool and I can actually increase the size of this one. Okay, I'll click this one here and I can also decrease or increase the size. What I'll do is I'll come here and I'll put this on top of this one. Maybe it's not the same but resembles what it is. If I just want to change anything, I will come to this handle over here. As you guys can see, this is the handle. I can basically change this particular points from here if I want to change anything or if I just click on Caps Lock. From here, I will just. Okay, I can actually select these points and here you guys can see the different ways of how you can actually do that. Once I get the handle, I can actually make the designs over here. Okay, I can do that, but I will just go back of how it was with my selection to. I will keep it somewhere here. Okay, I'll keep this one somewhere here. Let me zoom out again. Okay, here. Now I will add color to this one. Okay? I will select this, I will add some color properties panel. Go to the fill option. Maybe I'll take something like this, but I'll just decrease this one. Now I want to color this whole thing over here. Okay, I will select only this layer. Okay, I'll select only this layer. Now what I want to do is I want to add some fill color. Okay, Maybe I will take some fill color from here. Come to this one and actually add a black file to the eye here. I'll select this one. With this, you guys can give basic blue color. Okay? So this is the one. As you can see, I have made some shapes using the pen too. Okay. You guys can also use it. So if you want to create any circle, you guys need to practice this one, because this one is quite complicated to use, okay? Suppose you made a line, and from here you want to curve it, okay? So you guys can do it like this or otherwise. If you again come here, suppose I want to make some shapes here. You can see I can make some shapes here and also connect this one somewhere here, okay? So this is how you guys can work, okay? As you can see, I can make different kind of, I will go here and I will make some shapes like this here. As you guys can see here, I have put all those colors out. Okay. I will just go back. Okay. As you can see, I do have all these shapes. I will just select this one. I'll only this. Okay. I'll delete this one. Okay, here you can see again I do have this layer. Maybe I will just add color to it. Now. I'll come here, go to the fill option. Give this color this in a part. Okay? I'll just fill this with black as I have showed you guys before. Now I want to basically change this color. Okay? I'll come to the fill and maybe take some yellow. Okay? This one actually I'll come here again. I will decrease the color or I'll put direct black. Come here to this whole frame. Come to the fill option here. I'll fill it with something in yellow. Okay? But I want to change the opacity of this to quite a. Okay? So I will somewhere choose here. Okay? So I do have this, now this one is just above. Okay. What I can do is I will just select this layer and I will go to the arrange option and you guys can go in from here as well. Okay. And I'll click to send to back. Okay, I just want this one to go back here. You can see now this layer is on the back. Only this layer I will select here. I will change the fill color of this. Okay, Maybe I'll take it something into this blue change capacity from here. Okay, so here as you can see, I have created all of this. And now here, if you guys want to add more strokes, you guys can add more strokes as well. Suppose if I select all these layers. Okay, So first I will just group all of these layers here. Okay? All of this. Now I will just group with this layer. Okay, I will click here, otherwise. Okay, I have already grouped this one. Now if I just move, okay, maybe this one is not grouped properly. I'll select all of this. Click here. Go to one group. Go to group, Everything. Now as you can see, I can move all those properly, okay? This is how you guys can make your shapes. And you guys need to keep on practicing to master this particular thing here, okay? You guys can basically master once you keep on practicing, hope to see you all. In the next class, we'll be learning about how you can actually work with the Pin tool in Illustrator. Okay? We'll be learning about all of that in the next class. Till then, take care. Goodbye. 8. Drawing with pencil tool: Hello everyone, and welcome you all to another chapter of a Illustrator Essential Tutorial. Now we are on our Chapter number eight. Here we'll be learning how you can draw with the pencil two. Okay, Here I'll be explaining to you guys about strokes and how you can basically work here, okay? And also change different options. Okay. Here I'll be showing you guys about the pencil two. Basically I'll be making some designs. Let's not waste time and let's get started with this particular chapter. As you can see, I'm here in my home page of the illustrator. From here, what I'm going to do is I'm going to open an image. I'll come here in the open option here. You guys can see I do have different images. I will open this image which I have downloaded from pixels there. Basically, you guys will get the images. As you can see that I have just dropped this file, that's why it became like this. Okay, but here I'll just go back. Okay, I'll just delete this one again. I'll come to the open option from here. Instead of this I'll come here or in the edit option. Okay, from here I will try to place, okay, where is the place option basically? Okay, I'm not able to see for that, I need to create a new file first. Okay? Here, I'll just create a letter size file. Okay? It will give me a page here. Now if I come to file, if I click on place here, you will be able to see, I can take those images here. If I click on place here. As you can see, I do have that option in my mouse. Okay. Now I will just one this image till this much here. You can see I do have the whole image here. Okay. Here what I'm doing is I'll be using the strokes, okay? And also the pencil two here. As I do have my image, now what I'm going to do is I will just increase the size. Okay? But it will look like this. Just to show you guys an example. Okay, here I have my image. Now I will go to my pencil tool from here. Okay, here I do have my pencil tool which is in from our keyboard. I'll click on the pencil tool and you guys, I can make some designs here. Okay? But here if you guys see if I just write back, it is not writing properly but it is just decreasing. Okay. Here as you guys can see, this is how it will just decrease again. I'll come to this option here, I'll check the selection to, and I'll delete this one from here. Okay, I'll delete this one. Now if I want to change the smoothness, what I need to do is I need to double click here. Okay. Here you can see I double click this one and I will just mark this keep selected option here. Okay? I'll just unmark this, my fidelity. I want it smooth so I will just keep it on top. And now if I click on, okay, from here. Now if you see if I just made a line here, you can see this is quite smooth, okay, comparing to the one which I had here. You guys can see I can make some shapes. Okay? If you guys can see, this is how I can make this thing smooth. If I come here, if I select all of this, okay, I'll just delete this one again, select this, bring this one somewhere here. Okay. You guys saw how I can make some designs. Okay, I'll try to make some. Select this one now. Click here. Some designs here. Okay. Here you can see the smoothness and also some designs which I want to create. Okay, I will come here, select this, and I will delete. I'll just delete this one. Now here I can, or I'll select again, this pencil tool here. I will do like this, okay? This is just an example, okay? Now what I want to do is if I want to change style, what I can do, okay, First up, I'll come here and I'll only select these things over here. Okay, I will select those things now. Let me just zoom in right. Okay, I just come here. Control plus. Okay, let me just zoom in here with my selection tool. I'll select all of this again. Now I will go to the Properties option. Okay, here, now I'm in the Properties option. Now I'll click on Control C to copy this one. Okay, I'll make another layer here. Okay, this is the layer number two. Here, what I want to do is I want to copy this one. Okay? I'll just log this one. Okay? And I will just make some designs here. Okay? On top of this one. Okay? Here, if I select my pencil tool, again here you can see I can make some smooth lines. I'll just try to make some smooth lines here. I'll make this one here. Okay? Now I'll go to the properties option. And from properties option here you can see I can change the stroke width from here. If I just increase first on it to select all of this, okay, If I increase here, you can see I can increase the stroke size. Okay, let me just increase it from here. Now what I'm going to do is if I want to change or do some advanced features of stroke, I just need to double click here or I'll double click here. Okay, So here you can see I do have different options. Okay, to understand that, let's just come and take a good look here. Okay? Here I will just double click here. You can see I do have the caps option, okay? It will just make it round. Okay. Here you can see this is making this one round here. This one is the projecting cap. Okay? Here you guys can see the changes, okay? Between this and between this one, Okay? It will just take the line. This projected one here, you can see the corners. Okay? If I want to be round joint, I can take the corners. Okay? If I want normal here, you can see I do have another option, okay? The bavel joint here. You can see all of the changes here. Okay? Now, if you want to select all of this again, now I'll come here. Okay. Again, I'll double click. Okay, here. This is an option called the Dhlide, okay? I can actually work with that as well. If I want to change the profile first, I'll try different profile from here. Okay. Here you can see this is the profile which is this one, okay? This is the width, profile two, this is how it look. I'll just try all of this out. Which one looks better? Okay, I have all of this here. Maybe I will select this one. Okay? This one looks good. I'll select this one from here. Okay, I do have this. Now if I want to make some arrows. Okay, I'll come here to a pencil two again. Okay? I will take something like this here, I will do something like this. Okay? Here you guys can see, okay, Now I have made both of these lines here. What I'm going to do is I'm both of this here. Okay? From here again, I'll come to the stroke option. From stroke, what I can do is I can actually give them some arrowheads. Okay, Here you can see I can give them some arrowheads if I select this one here, you can see if I want to give it in the back as well. I can give it in the back as well. Okay. Here you guys can see I have all of this and I can also scale those down. Okay? If I just scale down, it will be scaled down. Okay? If I scale this one down, it will be scaled down. Now, I can actually increase the stroke from here, okay? I'll come here and I'll try to stroke, but this doesn't look that great. Okay, I'll just try to keep it simple here. Okay? And I do have these arrows. I do have this one. I can also set different colors to my stroke. Okay? If I just click here, so if I want it in yellow or green or in any of these colors, I can actually choose that. Okay, I'll keep it in somewhat brown. Okay, Here you can see I do have both of this. Okay? Now if I want to create any dash line, okay, I'll click on this one again to the pencil tube. Here I will try to make some lines. Okay, Here you can see I have made some lines. Okay, Now what I'm going to do is I'll come here with my selection tool. I'll select all these lines from here. If I again, double click on this stroke. Okay, here you guys can see I do have the option for line. Okay. From here I'll click on this. Now I can basically change the gap. Okay, From here I'll come to this one. And how much do I want my gap to be? Let me take ten here. You guys can see if I just click outside here, you can see the gap between all of this. Okay? If I select all this again from here. If I click here once. And if I want that round cap okay, I can see that route cap to it. Okay, so let me just keep this one to here and let's see the difference. Now here if I just zoom in to show you guys, okay, so here if I come a little bit on this side, okay? Or I will just zoom out a little bit. Yeah, I will come here in here and I'll try to zoom in again. Okay, so here the lines, okay, So here you can see the rounded shapes. Okay, so here on the ending they have rounded shapes. Okay, Here if I change those again and if I come to stroke, and if I click on this one here, you can see pointed, okay? So you guys will be able to see if I just put a color to it. Okay, So maybe I'll take something white. Okay, So here you guys can see now properly again, I'll come to this, click on this one, and here you can see rounded ones. And here is the projecting cap one, and here is basically the square one, okay? Here you can see the corners, okay? If I do any kind of corners. And here you can see this one. Okay? But I don't want any, basically I will just click on this. I'll just check all this as well. Okay, I'll line Stroka. Okay? I'll check all of this and this at the dash line if I want to preserve exact caps and lens. Okay, here I can add those and I can also add arrowheads as well. Here what I'll do is now if I want to make it something like round shaped, okay, here what I'll do is I'll come here to this option. Okay, I will just make 00 and I'll click on Enter Here you guys can see, okay, here I do have those lines. And maybe I'll just put some white color only. Okay, But now again, I'll come to the Stroke option. And from here I will just increase the gap. Okay, Maybe I'll put something like 30. If I click on Enter, you guys can see I do have this ones, okay, Lines here. Okay? So I can actually select all of this. You guys might not see properly, okay? But I will just increase the strokes here and I'll come and I'll just keep this one here, okay? Something like 450 here. You guys can see change here. You guys can see some changes. Okay, You guys can do that as well. Okay, if you want to add, but this doesn't look that pretty for that. I'll just click here on this. I'll delete this one as well. Okay, so all of this I'll delete from here. I hope you guys have understood how you can actually use the pencil to that. It will give you some of the smooth lines which you can draw with and how you can also create zero, okay? We guys have learned all of this here in the particular class. In next class, we'll be learning about how you can use brushes in Adalsra, okay? We'll be drawing some things here, okay? Let's practice this one, and till that time, let's start our new chapter on using brushes. Okay? So hope to see you all in the next chapter. Till then, take care and goodbye everyone. 9. How to use brushes in illustrator: Hello everyone, and welcome you all to another chapter of the Auto B Illustrator Essential Tutorial. So now we are on our chapter number nine, and here I'll be showing you how to use brushes in Illustrator. Okay, so in last class we have learned about strokes and also about the pencil two. Here I'll be telling you guys how you can use the brush tool and you can actually put different type of effects inside your design. Okay, so we'll be looking into all that here in detail, so let's not waste time and let's get started with this chapter here. So here as you guys can see, I'm here in the home page of the lustrator. From here, open my previous chapter, which I've saved. Okay, Here I have saved, I have named that one as the pencil two. Okay? So here you can see I do have the pencil two, and I'll open this particular file. Okay? Here as you can see, I have opened the file, so I'll just zoom out a little bit. Here you can see the changes which I have made here in last class. Okay? Here in this class, I'll also show you guys a few of the things which we can basically do. Okay? Here again, I'll come to this option first, okay? I'll come to the windows from windows. What I need to do is I need to select the brushes option, okay? Here as you can see, I have the brushes option, or what I can do is I can come here, here, I will again come to this windows and I'll basically open this brushes option. Okay? I'll keep this one somewhere here. Okay? I will just put this one here. I will just decrease size of this from here. I'll just take this one back. Okay, And now with my pencil tool, again, I will create some designs. I will just, this one here, I will make some designs. Okay, so here, this one, I'll create a small one here. Okay, here I do have a few designs. Okay, I will select this selection tool. I'll select all of this here. Okay? Now what I'm going to do is I will put some effects here. Okay? Here I do have the brushes option. From here, what I can do is I can click on the symbols which I basically want, okay? Here, if I choose this one, okay? And if I make it a size, I will select all of this here. If I select this one here, you can see I do have a different effect. Okay, here, you guys can see a blurred effect here. I can come down and I can also put all of this here. This one looks good here. I can check different things, okay? Here, if I want like this or if I want this one like this, I can do all of this from here, okay? If I do this one and this one here, you can see how it basically looks, okay? From here I can check the symbols. What I want right now, I'm using this one. You guys can also use all of this here as well. Okay, here you can see this are a few of the changes which you'll basically get. You guys can come here from here. You guys can also check different swatches, color. Okay? You guys can choose different colors as well, but before that I'll just do this one here. I won't add any color. Yeah, I won't add any color here. You can see the effect which I do have here. The same way if I come here, I'll just decrease this size. Again, with my pencil tool, I will make some designs here. Okay, maybe this one and this one. Okay, here you can see I do have this now with my selection tool. I can select this particular part from here. If I go to the brushes option from here, I can actually check here. So many things are there. Okay. Basically I'll be selecting this vector packs from here. I will click the grunge brushes. Over here you can see different designs. Okay, here, I'll just keep it one point right now. Here you guys can see I can make different designs. Okay, here you guys can see, you can check which one looks good. You guys can afterwards drag this one and also rotate this. Okay. Maybe I'll just select this first. I'll click somewhere here. Yeah, this one looks good. We can basically keep this one somewhere this side. Okay. If you want to put in this line, you guys can do this one as well. Okay, here, you can see if I change this one. Suppose if I select this layer, and if I do this one, this one, or here, if I do this texture, I can do all that as well. Okay, for that, if I come here, if I collect this one here, you guys can also see what all we can do. Come here, back again. Okay, select this one from here. Check out different things as well. Okay, let me take the hand drawn brushes vector back from here. I can select this one here. You can see look hand drawn. Okay, here I can, if I want to decrease the size from here, I can basically decrease the size of all those if I just group this one. And if I want to decrease the size, I can do that as well. Okay. But I'll just select something simple. Maybe this one is okay, I guess maybe this one is fine. Okay, guys can actually work with all of this. These are the options for verses. Whenever you want to explore different things, you guys can come here directly. And you can also use the decorative option, the bridge tal brush, and also the borders option here. If you take the artistic and if you use the artistic ink here, you guys can see I do have different options here. Okay? We can just select on this one and we can just click here, okay, here. If I select here, if I just click on control C here, if I just paste this one here, you guys can see I do have all these things again. If I now select this one, I will just try to move this one somewhere here. And now I can basically all these things here. Okay, here you guys can see I can control C and I can always put somewhere here control, we can actually copy this particular layer as well. Okay, if you want to change all this individually, in that case what we can do is we can come here. Now we'll just select all of this from here. Now we will just keep on grouping. Okay, here if I try to select any particular part, suppose if I'm here, okay, I will select all of this. And I'll click here, and I'll click on Group. And now I will keep on grouping each and everything from here. Okay, so here if I'm trying to select, I'm not able to do that basically. Okay, but here we can add different layers. I'll click on this one, and now I'll select Control C. Okay, here I will select all of this, and I'll click on control C. Now if I come here and if I paste this one here, you can see I do have this. Suppose now if I want to change the color of this one, then I'll again come to my strokes and I can change the color from here. Okay, we can add all these things from here. And these are a few of the options which you can actually use and all these things as well. We can add different type of designs or brushes here. I'll just again come here and click twice here. You can see the difference here in the image and what are the effects that I have used here. These are the simple thing for symbols. Now, instead of this one, if I come to this here, okay, Process rectangle from here, you can see there are different styles here. All of this is quite hard to actually use. From here, can see I can put basically all this as well. Okay, From here, logo elements, I can put all of this as well. I'll just click on this here, now I will just click on this here. I'll just try to put this one. I can put all of this logo thing here as well. And we can basically put different type of colors, whatever we like. Okay, here, we can give some colors as well, and we can actually increase the stroke size. Okay, here you guys, I can actually change the stroke size. Okay, here you guys can actually edit some of this from here. Okay, here I will just increase the stroke size. Here you can see there is a problem for that if I'm trying to increase. Okay, you guys can do that or basically they do have different options here which you can just decrease the size. Actually you can use that. Okay. Now it's taking some time here, okay. I'll just out again back at the same place here. We can basically work with all this as well. If I want to fill it with something else, I can actually try that and I can basically do it for this one. Okay, If I click on Enter, I can try to do all of this from here. Or if I just click on this icon, I can just decrease the size of this icon. Or if I want to rotate this one, I can rotate this and keep this somewhere here. Okay, We can actually use all of this from here. Here is the option for if you want to place symbol instance. Okay, here you guys can do that and you guys can work with all of this. Okay, I'll select this one and I'll just delete this from here because I don't want that. I'll just keep this one here. Hope you guys have understood this class on how you can actually use the brushes option to create some stunning designs. Okay, here if I just blink on this one, I can always do all of this from here. Suppose if I want to rotate, I can rotate this one as well. Okay, Suppose I want to keep this one here. And I can keep this one here as well. This one, if I want to keep somewhere on the top, I can also do that as well from here. Okay, so here our brushes option, okay? And anything more, if you want to explore about this, you guys can also do that here. If you want to change the color of this one, you can select different colors. We guys can do all of this from here. Maybe I'll just keep it in white over here that we can use. Okay, I'll just select here. And here I do have the styles. Okay, you guys can create your own designs and also make some good looking effects. Hope to see you all in the next chapter where we'll be learning about how we can, how we can actually draw lines with the width too, Okay? How we can actually change the width or give different shapes. We'll be learning about all of that here in our next class. So till then take care and goodbye everyone. 10. Drawing with the width tool: Hello everyone, and welcome you all to another chapter of the Autob Illustrator Essential Tutorial. So now we are on our chapter number ten. Here I'll be showing you how you can draw with the W two, okay? How you can make a line quite big and also make few of the designs with that. Okay, so we'll be learning about all of this here in this particular chapter. Let's not waste time and let's get started with this chapter. Now as you can see, I'm here in the home page of the illustrator from here again, I'll open a new file from letter. I'll be choosing this Gate option. Okay. I will click on this one here. You guys can see I do have to set up here. Okay. As you guys can see, I will just decrease or I'll just bring this one somewhere here. Okay. I'll. This one, yeah, this one is quite fine. Okay. Now, again, I'll take my pencil two from here basically. And I need to check that this one's fidelity is in smooth and the kick selected is I didn't mark this one. Okay. I'll click on. Okay, from here. And what I'm going to do is come here, back again, and select this. And I'll delete this one. And again, come here, okay, with this particular tool over here. And try to make some designs. Okay, here I will try to make some designs. Here. Also, I'll try to create a flower thing. Okay, I'll just try to create some lines here. Okay. Maybe it won't be perfect just to show you guys. Okay, I'm trying to make. Okay, I'll click on this one here. You guys can see if I just select all of this from here. If I just bring this one over here, okay, I will bring this one over here, or I'll just keep this one here only. Okay, again, this tool here. And I'll create some designs. Okay, I'll click on this one here as well. Okay, here as you can see, I do have these shapes. Now what I want to do is I want to increase the width of all of this. Okay, again with the selection tool, select all of this. Now, as this one is selected, you guys can come here to the width tool. Okay? This is the arrow here. As you can see, I do have different points here. Okay. Now, just to show you guys better, I will just try to zoom in. Okay, I'll just zoom in here. And here you guys can see, can select this particular path. Suppose I want to change the width of this one. I can change the width, okay? I can actually do with all of this one here. Here you guys can see I can add this particular effects. Okay, so here you can see I can change the width from here. And again, select this layer, and I will increase the width of this layer as well. Okay, I'll just complete this whole thing down from here. Okay, I will just change this one. You guys can take your time for changing all of this. Okay? You guys can also practice this one, okay? As we do have class projects as well there, we can also learn I'll be giving you guys to do that one as the class project. I'll just finish this one as fast as I can. Okay, so here you can see I do have these changes and I'll select this spot. And I can also bring the line somewhere here. Or add the line here. Okay? If I just zoom out now here you can see the difference of how it actually looks and how I have actually changed it here, okay? Suppose if I just want to shake this line here, okay, here, basically I just increase or decrease the size. I can do that from here. Okay. Here as you guys can see, I can select, okay, This part I want, little thin. Okay? And this part I want to make something like this. Okay? I'll click on this one from here. You can actually select the size. Okay? If I can do that, I will be doing all of this from here, okay, to all of this one. This is how you can actually make shapes around here. Here, I have selected to. Okay, I can also come here. Okay, suppose I want to make some designs with the pin to. Okay, I will just select the pin to. From here. Maybe I'll come a little down here and I will. This, I will just join some places here. Okay. So I can make some anchor points as well, or I can just actually go one step behind. If I want to create any kind of shape, I can create those shapes from here. Okay. Here as you can see, I am trying to make some shapes here. Okay. I can just actually go one step back and one step back, I can actually connect all of this from here and I can change this one as well. Okay. Here as you can see, I can create different shapes here. If I come to this point here, you can see I have made this box as well. Come here like this one. Maybe I want to decrease the size of this and select this whole thing and keep this somewhere here. Okay. Now I will also group this one. Okay, I have group both of these layers. Now what I want to do is I will come here, I'll just in a little bit. And from here, as you guys can see, if I select again my width two, okay? So from here basically I can change the width of this lines as well. Okay? The way I want, I'll be doing this from here. Suppose I will do this one, and now I will select this particular path. I will select here. From here. What I can do is I will select something like this and this layer here, and this one, I will just increase a little bit. Okay. Here, from any point, if you just try to, this one down, you guys can do that. Okay? You guys can have different lengths right here. Okay. Here, if I want to put this one somewhere like this from here, you can actually increase like this. Here again, this end, you wanted something like this here, you guys can do that. Again, same goes to this point here, okay? You guys can select and make different designs over here, Okay? Here, if you want it like this, Suppose here, if something put like this and right here, I'll just put like this here. You guys can actually do with this particular line, all of these features, okay? You can actually adjust all of these lines here. Now if you want to add any color. Okay, I'll again come to the properties option. And with my selection tool, I'll select all of these layers which I do have here. Okay, come to the Strokes option. Okay, I'll just come to the Stroke option and I can put different types of colors here. Okay? As you can see, if I just put red, I can select these colors. I will just adjust the colors a little bit. Okay? I will just adjust these colors. Here is the shape which I made using this one. Okay? I can also select different colors and also check out their shades if you want to see different colors. Or we can also check the opacity. If I want to change his capacity, I can change that one as well. Okay, here is a particular design. Now if I just out here, you can see I can basically move around this one. Suppose I want to move this one around again. I'll keep this one here. Now I will just select this text. I'll click on Group. Or I will just group this one from here. Now if I just move this layer, okay, Or I'm just selecting only this layer, but I need to select both of this, in that case, this one and this one. I will just group both of this, or I'll just ungroup again. I'll group from here. Now, I'm having some difficulty here to do this particular thing. Okay, I hope you guys have understood this one. Again, I'll select the curvature or the width tool from here. Okay, I'll come to this W two maybe. I'll just increase the size a little bit from here. I will just increase this one little bit. Okay, I can do all of this from here. If I want to increase the length here, I can do that as well. Okay? It totally depends on us, how we want to make this width. Okay? I can also put some different colors. Okay, We can do that as well. Okay, I'll just go back here. Okay, I can do all of this here. You can see the width profile. Okay? I can also change the width profile from here. Okay. If I want it somewhere like this, I can do that. These are a few of the presets of width. After selecting any particular preset, we guys can also, again, work around with this one. Okay? So I can just come here, I can select the width, and I can basically change the shape or all of this from here. Okay, So here I will just increase the size. Here, Maybe I will just broad this one a bit and I'll keep this one somewhere here, okay? This type of shapes also you guys can basically make here, okay, and modify your width profile, okay. After that, here is option, if you want to flip along here, you guys can do this. This particular things will be flipped basically here. Okay. Guys can do that here. If I do only have hardboard, I can also align this one again up here. You guys have understood this particular class of how you can do that or how you can make changes to all of this. Now, if I just select this layer, okay, Suppose I will just select this one over here, okay? All of this. Now I will select, what I can do is I'll bring this one here. Okay? Now what I do is I can basically put some color to my strokes. Okay? Here I different or same colors and also adjust the color from here, okay? And increase the intensity sometimes. Okay? I can actually adjust all of these things from here. Okay. We can do that as well and we can make our own designs. I hope you guys have understood this class on the width two, okay? How we can basically use this with two after going to the width two here. How we can adjust this point throughout this path from here, if you want to put some anchor line, okay, you guys can basically click here. You guys can do all of this as well. Okay, here, you see how I can actually change all of this, okay, We guys can do here as well. Okay. Here you can change the width, profile, and all of this here. Okay? If you want to group all of this, suppose I will just select this selection two. Everything is selected. Now I can basically group all of this as well. Suppose if I want to move something, I can move the whole group together. Okay, I have group this one here and here. I do have only one layer to see you in the next class. Till then, take care. Goodbye everyone. 11. Using type and fonts in illustrator: Hello everyone, and welcome you all to another chapter of the Adobe Illustrator Essential Tutorial. So now we are on our Chapter number 11. Here I'll be showing you how you can use type and fonts in Illustrator. Okay, so there is the type option in my toolbar, so I'll be showing you how you can actually use that one and how we can actually download also different type of fonts from our Adobe fonts. Okay, so I do have to download that from our Creative Cloud account. Okay, so from there I can get access to all of those and how I can use all of those type of fonts in my work. Okay, so we'll be learning about all of this here in this particular chapter, So let's not waste time and let's start learning here. As you guys can see, I am here in the home page of the illustrator. I'll come here and I'll click on New File. And what I want is I want to make some card. Okay. I'll go to the print option. And from here I can check all this preview from here. Or if I want to use it for any poster, I can basically take one size. Okay, maybe I want to take it in inches. I'll click here on inches here. I can see this one is 18 " and 24 " here. Okay. The height and the width. And this one, let it be in this shape. The vertical shape. I don't want it horizontal, okay? I'll just take only one of this, and I can also add 0.25 glide color mode. I will give the RGP color from here. Okay? Now, I will create one page here, okay? It might take time here. As you can see, I do have my particular size of page here. Now what I'll do first is I will come to the shape tool and with that I will create a rectangle. Okay? I want to actually create one rectangle from here, okay? I'll just cancel, and I'll cancel this one as well. And I just want to create this one from here, Okay? It might take some time, okay? But I will just create this whole page from here. Now I can come to the corners here, and I can actually adjust the corners. Okay. Here, I will just adjust this particular corner as well. Okay? Now it's quite aligning to the page. Okay? With my hand tool, I can just move around a little bit. Okay? I will try to fit in properly. Okay, Here as you can. Have my page now. Here, okay. I'll select this particular page and I'll go to the fill option. And I want to fill this with color here, okay? Maybe I will take this color and I will just keep this one something like this. And I can also adjust this point from here. Okay, Maybe I'll take this particular color and I'll click on okay, here. Now what I can basically do is, as you can see, I do have selected this layer. Okay. Now I will come here and I'll only select this. What I want to do is I just want to take one part, okay, of three. I just want to make another box here. Okay. For that, I will first divide this one. Or I can just also create okay, for divide. I can just do that if I just click on this one here. And if I click on three. And if I click on Enter here, you can see I do have made another one. Okay, before that I will say this one and I'll click on Control. After that, again, I'll come and paste here. Control plus V here. You can see I do have two layers here, okay? Or in the same layer. I do have to, okay, I'll select this one. Now, basically here I will do that same thing which I did there. Okay, I'll come here and I'll divide this one by three. Okay, Here you guys can see I do have this. Okay? Maybe I will just select this one and I will keep this in one side. I will also increase the size of this one. I will just keep this one somewhere here. Okay. I will just match this line. I have matched this line from here as well. I'll just zoom out a little bit. Now what I'll do is I will change color of this one. From here, maybe I can take a deep blue color. And from there, basically I can actually make it something like this. This one looks quite better. Right now what I'm going to do is now as I do have this template, I will come to the layers option and I will just copy another layer. Okay, if I do have this or if I will come here now, I can also create a different layer here. I do have a different layer now, I can actually log this one. Okay, I'll just basically log this layer that I won't be able to change anything. I'll just zoom in first. Okay? And now here if I want to start typing for that, what I need to do is I need to select on this layer. Okay? So here I will first show you guys the type two, okay, the basic one. If I just click here here, you can see it's just creating a small place here, okay? And basically from properties, what I can do is I can actually increase the size from here, okay? So if I want to increase the size, I can increase the size from here. But what I want is I don't want it like that. First what I can do is I will select this with my selection tool. Okay, So I will delete this one here also. I do have it. Okay, so I'll just cancel this one. And I will select this one here, and I will delete this one as well. Okay? So for that what I want to do is I want to create a box. Okay? So for that I do have my mouse here and I can actually fill this box. Okay? So I can fill this crediclar box here and here. As you can see, once I have made this text box, I do have a placeholder text already here. Okay. So now as you can see, I do have different type of characters option. Okay, Different font families. From here, I can choose different type of fonts. Okay, for me, maybe I'll take the band script. Okay, I can take all of this. I can take here, I can choose this one if I want it to be bold or anything as such. So this is how I can actually select all of this. And from here I can actually change the wet of the letters. I can do this one as well. Okay. Here as I do have all of these options. Now what I'll do is I'll create another text boxes here. Okay. I'll use different texts again. I'll come here, select this one from here. What I'll do is I'll create another box. Here and here also, I'll be creating another box. But in all of these places, I'll be using different font styles. Okay, here, suppose I will select this whole text box from here. Now I want to select different text styles. Okay, I'll come here, or I will just select this. If I select all of this and now I will be able to change. Okay? As you can see, I do have all of this here, okay? All of this. I will take one font which I have downloaded and there are a few options from where you can actually filter. Okay, once I've clicked on this filter option here, as you can see, if I do use the slab serifs here, I can always look for all that. Okay, here are some handwritten one. If I select this, I will have that type of fonts here for me. Okay, for that I need to download here. You can see I do for this option, okay? Monospaced. If I select this one here, I can take this letter as well. Okay, Now I will just come here and I can actually go back here again. If I select, I will select this one. And now go to this option here, select this one, come here, and create another text box here. Okay, From here I can basically create another text box. Okay? From here I will create another text box. Now from here I will be able to change it. Okay. Now, if I want to filter again, what are the ones which I have recently used? Also, I can download different forms from outside as well. Okay. I'll show you guys how you can basically download for that. What I'll do is first I will come here. Okay. So maybe I'll go to my Creative Cloud account or from here. Okay. So here I do have the ponts. Okay. So I'll again go to this point. Here I do have the autobphonts. Okay? So here you can see there are different kind of fonts which you can basically use. Suppose I want to use this one that do Pin cell variable. Okay? If I want to add this to the family. So make sure you guys add this to the family here and you linked your profile or your Creative Cloud account with that one. Okay, from here, as I have already downloaded, you guys first need to go to the Creative Cloud account. And from here you guys will be basically able to see what are the auto B phones which you have downloaded. Suppose if you do have a different website where you're using this kind of phones, you guys can also use this one by installing this particular family, okay? This one is Pin cell VP. I'll come here and I'll try to search that one. Okay? Here I will come and I will try to search Pin cell. Okay? I will come here. Come here, I will just write dupin cell. Okay. Or I'm just having some difficulty putting up the name here. This one is fine. I will come to this option, I won't select. I will just clear all here. You can see I do have my dupin. This particular thing I can basically use here in my place. I can also check the sizes. Okay, downloaded for me, the whole set. Okay, Here you can see I do have set. Suppose if I want to select this layer, I will also choose this one here. I don't want this number. In that case, I will select this one and I'll bring this one here. Okay. Here. You can see I have also selected this text here. And also change this one. If I just move this one somewhere here, I will cancel this one. Yeah, this one is quite fine. I can also add different colors to this. Suppose if I want green color, I can select this one. If I select all of this from here. Okay, Suppose I have selected this one. Now I want to change the fill. Okay? I can also select different colors, and I can also try changing the fills from here. Okay, Here, if you try to see I do have this one in this color. I can also increase the size if I want to. Okay. Here, as you can see, I can also increase the size. I can basically move this one little bit down. I'll just move this one down a little bit. Here you can see a plus sign, that means that my text flowing. Whatever I make here. Okay? From here I can basically do all of this work. Okay? Again, select the text tool. Okay, I have, I will just select this particular thing again, or I will just delete this layer. Okay, I will select this one and delete this layer. And select this one from here. Change the font type. Okay, I'll change the family again. For that, I will have to select this one and select this whole thing from here, I will select different font family. So I'll select this one now. I will also increase the size. Okay. I will increase the size of this one as well. Here, you can see it have adjusted by itself from here. Okay, I do have this one here. This is the line between the two lines here. Okay? This will increase or decrease the spacing. Okay? This is basically called the leading. I will just take on top this one. If I just want to take on top, I will just take this one. Here is another option. This one is tracking, okay? It will just increase spaces between the characters. Okay? Suppose you guys do have this option, If I just select this letter from here. If I just keep the tracking options on, okay, if I come here, if I put on zero, okay, you guys can use all of this. Okay, here. I can also create the curing. Okay, I'll just delete this layer. I will come here again. From here I can actually check the carding option. Okay, I can actually use that. Okay. Card on Extended Selection can only be set to auto, to modify spacing between multiple characters. Use the tracking options. Okay. Okay. They're saying that if I select more than one character, I need to use all options. Okay. I can only send this one to zero or auto. Okay. I can do that. I won't be able to do anything more here. I have done this one as well as this one is a downloaded preset, basically because of that. Now you guys have seen how I can actually work with all these colors and I'm trying to make a poster here. Okay. Here as you know that I do have two layers. Okay? One layer I have locked, which is the background. Now what I can also do is if I want to change any particular color, suppose I want to change the color of this writing here. I can basically come here and I can select and change the color of this one here. If I want to highlight anything, suppose I want to just highlight this particular word from here. What I can do is I can come to the stroke option and suppose I want to take something brown. Okay, here. This is how I can basically change all of this and I can also do some modification according to my need. Okay, I hope you guys have understood this part here. If you want to align all of this here in the center, suppose with this, select. If I select all of these layers. Now what I want to do is I want to align it to the center. I can do that. If I want to align it to the right, I can do that as well. Here are different options. Okay, Which you guys can do as well. Okay? I will just come here and I'll select the center option here. If you want to do this, you can do that as well. I'll just put this in the center, not that bad. Okay, here I do have the bullets option. If I want to add some bullet points, I can add the bullet points from here. Okay, Here are some alignment option. Okay, if you want to group all of this, you guys can also group all of this from here. Selected this one. If I just want to move, suppose if I come here and I have selected this layer. Now if I want to move, I can just move this whole text around. Okay, I can do that as well. Here I have shown you guys how you can actually download different type of fonts. Okay? Make sure whenever you go to your Adobifontsjte here, okay? And you go to your home page and make sure that you enter from here. Okay? The shortcuts is Aoi fonts, it will directly take you to this page here. Okay. Biomistically, I have created a lot font pages. So as you can see, I do have this one here. Okay, I'll click on this one. I'll delete this. I'll delete this one as well. From here. Basically I can select different type of properties. Okay, the width which I want, the text, if I want to add this kind of thing, I can also add, I can download all of this and use it in our Illustrator. Okay. All we need to do is we can just click on a To the Family, and it will be created here. If you want to remove anything or any type of characters which you have already downloaded, you can just click here and actually remove those fonts. Okay, hope to see you all class here we will, in next class learn about how you can actually type like in a curve, okay? Using this curve tool, I'll be showing you guys how you can actually type on a path or on a curve. We'll be learning about that in detail, Okay? I hope to see you all in the next chapter. Till then, take care and goodbye. 12. Typing on a path in illustrator: Hello everyone, and welcome you all to another chapter of the Autobi Illustrator Essential Tutorial. So now here we are on our Chapter number 12, and I'll be showing you how you can type on a path in Illustrator. Okay, so here we'll be using the type on a path tool. Okay? And also I'll be making a few designs. Okay, So we'll explore all the options which we have under the type and a path. Okay? So we'll learn about all of this here in this particular class. Let's not waste time and let's get started with our chapter here. Here. As you guys can see, I'm here, back again at the same page which I you guys about the text option and about the font option. Okay, Now what I'm going to do here, I'll be trying to create some path. After selecting this path, what I'll do is I'll first come here. Okay, Let me take a circle from here. Basically, I'll create it outside. Okay? I'll cancel this one here. I will try to create a circle. Okay? What I'm going to do here is basically I will come here, okay, to the properties option. I will fill this one with a different color or let it just be white. Now I'll come here and I'll select the type on a path tool Here you guys can see once I hover my mouse, okay, here you can see I have selected this one here. You can see I have my placeholder text on top of all of this here, okay? Basically what I can do is I can actually increase the size of my text here. I can basically increase the size of my text. Now here you can see I do have all of these things here. Now what I can do is I can basically type okay. For that what I'm going to do is maybe I'll type good evening. Okay. I'll type good evening. Now what I'm going to do is, as I have selected this particular text now, again select back all of this here. Okay? Or I can just rotate this one. Okay? With this selection tool, if I select this one, I can basically rotate this. Okay? Maybe I will just rotate on something like this here. You guys can see as I do have this option on top of this, what I can do, again, select this part from here. From here. Basically, I can actually bring it in the center. Okay? I will just come here. Only this particular option. Okay, I do have all these things here. Okay. Now I can also align this, If I just come here and with my selection tool option, what I can do is I can just click right here. I can actually rotate this or instead of this one. Let me come here, Let me select this particular text. Let me select the font first for you. Okay, If I take this font, if I change it to something in bold, if they do have the option, okay, so here I do have the bold option. With this one, can sell this one. Okay? Now I can try to actually put some rotation. Okay, Maybe I will just put the rotation somewhere here. Now, here you can see I'll just select both of this, okay? I'll just select this as well. Or instead of this, let me just show you guys a basic example at first, okay? Suppose here with my pen tool, I'll create some lines here, okay? Here I will create path here. And here I will create some paths. Okay, I will come here back. What I'll do is I'll just select this one now. I will just change this one to white. Okay, I will select this layer here. What I can do is I can just decrease this particular thing from here. Okay, I can do that. Or instead of this one, I can actually create some path. Let me just delete this with pencil to, I'll try to. Okay, here I do have my pencil and here I will create some lines. Or here I'll create some lines here. Maybe I'll just put 0.25 stroke here. Okay, 0.25 I will just fill this one with white. Okay, this one. I'll select white here as well. Now, let me just create some lines. Okay, Here you can see I do have a particular line. Select this tool, okay? Select this one and do the rotation, okay? If I want to write on this particular tool, in that case, what I can do is I will just bring this one somewhere here. Take my type tool type on a path. And here you can see I do have all of this here, okay? So basically if I come here and if I just select outside here, you guys can see I do have the anchors and all of this as well. Okay? I can basically move around this one if I want to move this one. Okay. If I just click on this with my Space button, I can do that. Okay. Now if I come here and choose the Selection Options. Okay. Here you guys can see I do have three lids. Okay. This one is basically what I'll do is I won't select these anchor points, but what I'm going to select is basically the lines over here. Okay. Again, select this one from here. If I select those lines, I can actually see how I want my path. Okay, If you don't have all of this, like you are not able to see this, basically I will select this layer and I'll delete this one here. I have written something. Okay, Now what you can do is you have already selected this one. And I can also see that I have another path, but I don't want this path as well as I have already written here. Okay, here you can see you guys can basically do that one. Now if I want to, some more colors or anything as such, I can actually select again, this one. I'll cancel this. Now, I will choose this option, okay? I will just select here. Okay. Here as you can see, if I just select the lines, okay, maybe from the center. I can also move it around. Not the points, remember, okay, just this anchor shapes. Okay? Now I can bring this one downward as well, here. Now, this one is in the particular center, okay? We can actually work with the center. If we do have a bigger path, we can, I want to do something here on the sides, Okay? I can do this as well. Okay? Suppose on the sides, I can actually do this things from the side as well. Okay, this side. I will select this one. I will just delete this box again here, I think this one looks quite good. Select this line here if you want to bring somewhere here, you guys can do that as well. Okay, with this, I can also move around. Okay. Here as you can see, I can move around. I can put whatever character do I want. Okay, I want this one. I can select this one as well. Now, again, I can just come here, select my selection tool. With this one here, I can actually change the size. Okay, If I just this head here. Okay, I can actually put this one here somewhere in the middle. Okay, I do have this option. Again, select this selection tool here. You can actually select this layer. I should not select this type tool. So while I'm doing this one, I need to make sure that I'm selecting something else or I'm selecting this Paul here. Okay, so here if I, I can also see the preview. Okay, so if I want to see, I can also see the preview. Okay, here I do have more options here. If I want to show property spanel, I can actually show the property spanel on here, this side. Like if I do have removed this one, then this is another way to do that. Okay? I will select this and I will just select this particular word. I change a font from here. Maybe I'll put this one. I'll put up a different color as well. Okay, I'll come here, go to the fill option. From this I will take something in green. Okay, here you can see I do have this one in green, but this doesn't look that pretty. What I'll do is I will come here, take a yellow. Yes, this one looks better. Okay. This is how we can actually write on a path. Let me just remove this one as we were working on this particular thing. Okay. Now the next thing what I'll do is I want to write another one. What I'll do again, I'll take another circle. Okay? I will take another circle from. To select this, I'll fill this one with a white color. Okay. I'll fit this one with a white color. Now I will select this and I will keep this one somewhere here. Again, with this layer I'll, I will also right here. Okay, I have made this particular path. Now come to the fill option. I won't put any color or anything as such. Just a path. Again, come to this particular option, this text option, type on a path to from here. Basically I can type, okay, maybe I'll type. Okay, I'll type everyone now. I'll click on Enter here. You guys can see I do have this one in a particular path. I'll just move this one that you guys can see properly. Okay, I do have this layer and that layer as well. From here I will come and select this tool. Now I can basically put some rotation, okay? I can basically give this one some rotation here. Here, if I want to rotate. This particular thing from here, basically do that, Okay? Here I am, keeping this one somewhere in the middle. I'll try to show if you guys are not able to see those lines here, okay? You guys need to make sure that you are selecting this option, okay? From here, which is the smart option. Okay? From here, make sure that you guys on the smart grid option, okay? Here you can see I do have the smart grid option here, okay? I can't open there. Now, as you guys can see all of these things here, I will just select both of these layers. Now what I can do is now what I'll do is I'll go to the type option and I'll go to the type on a path. Okay, Before that I will just select this particular layer. Okay, I will just rotate it back again, somewhere here. Okay. Now go to the type option. From here, you guys can basically see the option type on a path. Okay. Here I do have different options. From here I can actually get different options. Okay. Mostly I'll just on this one and I'll see what all changes can I make. Okay, Here I have click this one on flip, and I have flipped this one. Maybe I will put this one here in the center. Okay, I'll just on the preview as well. Here, you guys can basically see the preview. Okay, I can also change the spacing from here. Okay, I don't want that again. Maybe I'll keep on zero. Okay, I'll just keep zero. And I'll click on Enter. Now if I just keep this one here and I do have this layer as well now, I can actually rotate this one. Okay, Maybe I'll rotate this one and I'll keep this one here. I have made particular layer. Okay. I can also make sure that where do I want this thing to start or do I want to bring this somewhere here in the center? I can do this here. You can see those icons using all those. Okay, I have created this particular thing. Now what I'm going to do is I will be making a box. And inside that box I'll be putting on some text. Okay, to show you guys that one. I hope you guys have understood this one. Okay. Here you guys can actually do a lot of thing. Okay? I will select both of this. From here, come to the type option, type on a path here, you guys can actually check out different options. Suppose I will select all of this, any of this, I will just try to move somewhere around here. Open the type option, go to the type on a path, and give some things here, okay? Give all these options. So you guys can basically try which one looks good for you, okay? You guys can check all of this, okay? The gravity one looks okay in this gravity one. Also, if you want to put other options here here, you can see I have all these options here. If I want to align it in the center, I will click on Okay. From here I have aligned both of this here in the center. Okay, Here you guys can see this one is in the center. My writing here is basically in the center. Here, you can see I have joined both of this now with this one. If I try to move around, I can basically do that, okay? If I select both of this, I can actually move around. Okay? Basically from here I can move around. Now, let's create star here. Okay? I will make this star. I will also compress the size, the star. Okay, Here I will cancel and I do have this particular star. I'll just click on Shift and I will decrease the size from here. Okay? I will just put up a little rotation here that I can see that it's in a proper line. Okay? You guys can do this one as well here if you guys want to put any kind of curve here. Now, I will just group all of this, okay? I will just come here again. My star got deleted. I'll just make one star here. Okay? I will make this star with this selection tool. Select this 1.1 here in the absolute metal. Okay, I'll keep this one here. Now, select this one. Go to the fill option. Maybe I will put some different colors or something brown. Okay, I'll put this one. What I can do is I can now select this whole thing. Okay? Here, if I come and if I just select this whole thing, what I can do is I can basically move this around. Okay? All this while I can actually make the size quite smaller. Okay? From here, I don't want to rotate this. I'll just keep this one somewhere here, and this one in the middle. And select all of this and actually group this one. Okay? Now I can actually do this here. I can put this one somewhere at the bottom. Okay? I can keep this one somewhere here in the bottom. Okay. Here, I will keep this one. Okay? This is how you can actually type on a path. There are different ways. From here, I've shown you guys how you can go to the options. Suppose if I just select this one, go to the type option, okay? This one type option, type on a path. Okay? From here I've showed you guys different options. From here you can actually change the spacing as well. Okay, If you like to here you can actually on and you can actually see as well. Okay, from here you can see I can change the spacing. I can also make sure from where I want to start writing, I can do all of this from here. Okay? And I'll click on, okay, this one looks good. Maybe if I just select this one. If I just rotate this one, a little bed here. If I select this one also, I just put rotation of little, this looks better, okay? This is how you guys can actually start working with your typing on a path, okay? Maybe sometimes it won't look that great, but no worries. Just keep on practicing and you can master this particular tool. See you o in the next class where we'll be learning about colors. Okay? I hope to see you all in our next chapter till the take care. Goodbye everyone. 13. Take colour from Images using eyedropper Tool: Hello everyone and welcome you all to another chapter of the Adobe Illustrator Essential tutorials. So now we are on our chapter number 14. And here I'll show you how you can take color from images using eyedropper two. Okay, so I'll be showing you guys how basically take some colors into your, any kind of shapes which you have made or any animation. If you do have any colors in your image, how we can drop those color Using the Eye Dropper tool. I'll be showing you guys all of the basic uses of Eye dropper tool here. Let's not waste time and let's get started with this chapter here. As you guys can see, I'm here in my home page of the illustrator. From here, what I'll do is I'll open one previous file in which we were learning about the type and fonts. Okay. I'll be opening that particular file. So I have saved this one with the name, type, and font. I will open this one here. Okay? Basically, I'll be opening this one here. What I'm going to do is now I will take one image. Okay? Suppose instead of this, I will select type on a path. Okay? That is also similar, just something added on here. Okay. Here I do have these things added on. What I'm going to do now here is I will place an image, go to the file option from here and come to this place option or otherwise from your keyboard, you can click on Shift plus control plus P, okay? So you can click one or you can click on Shift plus command plus P. I'll click on this here, okay? Basically from here what I can do is I'll be placing one image. Okay? I'll take this particular image. What I'll do is I'll place this one here. As you can see, I do have my image on top of my mouse. Then I can select the size of the image here. As you can see, this is going to be the size of the image here. If I want to increase it, I can also click on Shift and I can increase the size of this text. Okay, I'll select only this text. Click on Shift and you can basically selength the size. Okay. If I just decrease the size, or maybe if I just keep it somewhere here. Okay, I'll just keep this one somewhere here, outside. Okay. And I'll just zoom out a little bit that I can view both of this properly here. I do have this option, I'll just move this one around here. You can see I do have different color options inside this image. Now what I want to do is if I want to put any color, suppose if I do have any shapes or logos here, I'll be creating some of the images. Suppose I'll create this one here. I will select this one here, and one circle right here. Okay, with shift, I can create it in a proportional size. I'll just align all of this just here. If I want to add different colors, I can add different color as well. Okay, suppose I want to put this same color here. Okay? In that case, what I'm going to do is I will come here in my toolbar and I'll select this option here. Okay? As I've selected this particular box, and I want to use color, I can click on this one here. You can see I do have this color here. In the same way. Again, come here to the selection tool and select this box. Suppose I want to use this color from the image. I'll click on this color here, you can see I do have this one. This is how you can actually steal colors. If you want to change the color of the text or anything as such, you guys can do that as well. Okay, Maybe I will take this blue color from here. I want to change some things from here as well. Okay, like some text color, I will come here, I will just cancel this one. Suppose I will just select this particular layer, from this layer using this eye dropper tool, I will just cancel. And from this eye dropper tool, I will select this color. Okay, for that, maybe I'll select this. Now I will select, I'll just ungroup all of this, okay, here. Now I can actually select, I want to use this white color over here, okay? I can basically zoom in to the colors as well. Suppose if I want white colors, you can see the changes here. If I want to make anything dark here, you can see I have this color as well. Now if I want to save this color, I can also save those colors. But I hope you guys have understood how I have actually used the Eye Dropper tool and how you can basically use those if I want to adjust this same thing down. Okay, maybe I'll just decrease the size proportionally. For that, I'll click on Shift and using this one. Here, I can put up this image. Okay? Maybe somewhere here. And I will decrease the size from this end as well. Okay? I'll decrease the size and I'll keep this particular image down here. Okay? So I'll just keep this one somewhere in the middle. Okay. Now this is in the middle. He saw what I have done. Now what is like I want to save this field color. Okay. For that, what I can do is once I do have this color selected, I can select new Swatch. Okay. Here, you can basically name the Swatch color. Okay, I will just write light pink. I will write here and you can also select this one. Will this be a spot color? Okay? You can also increase or decrease the RGB from here if I want to make it dark. But I will just save this particular thing here and I will click on. Okay. As you can see, I have selected this particular color. Now I do have this particular color here in my Swatch panel. Okay. This is how I can see the name as well. Okay. If I just keep my mouse on top of this one here, you can see the name which I have selected. I can select this one, which is light pink here. If you want to folders of color, you guys can also create new groups from here. Here, if you want to see the different swatches you guys can see. If you want to see color swatches, you guys can see. If you want to make some gradients, you guys can also make different gradients. Okay? For that, if I just come here, suppose I have selected this. Come to the fill option, okay? From the field option. Come here, okay. From here, basically you guys can select so many things, okay? I'll select this one and I will come to the from here. Okay? I will go to this thing here, I'll just cancel this, come here, I'll tell them to show some gradient things here. Okay? As I do have this one, I can actually use these gradients over here. Okay? If I come to this option, okay, From here I can basically change this color. Okay? Suppose I want to use pink here. I want to make the gradient somewhat this color. Okay? Here I can do this, and if I choose another color, I can also do that as well. Okay. Here I can actually make those gradients. Okay. From here I can actually change the colors again. Come here to this option. If I change this gradient, I can also check this gradient options. Okay, here, if I want to take different color, I can also take some different colors here. Okay, From here basically I can work. Or if I double click here, or if I click on this one here, you can see I can actually change my gradient as well. I can actually put different options or different colors. As you can see, these are sliders, okay? Using this slider, I can actually manage like how much I want to put the gradient. As you can see, I do have this one, this one here. Maybe I'll put a different color here now. Okay. Or I'll come here now from the side. I'll choose a red color. As I do have this, maybe I'll come here, I will choose a different color from here as well. Okay, maybe I'll take somewhat green. This is how I can also make a different style of gradients. Okay, here you guys can see I have made the gradient. Now, if I will just cut this option. Okay, I do have this gradient. What I can do here is now I can actually come and select this part here, okay. As I do have layers, I take this layer, okay, I will come to this one and come to the properties option. And from here I will change the field color, okay, to look those properly. I'll again come here to this active fill color option. Or from here I will click on all's watches here. As you can see now this is quite visible. Okay? The gradient which I have created. Hope you have understood this class as well. Okay, see you in the next class where I'll be showing you how you can mask image inside text. Okay, we'll be learning about that in detail. Till then, take care and goodbye everyone. See you all in my next tutor. 14. Class Project 1: Draw using the width tool: Every one. Now this is the time for our class project. Now we'll be doing our class project number one, which we'll be drawing using the width two. Okay? I'll be also showing you guys the steps which all you need to follow. Let's not test time. And let's get start by looking at the steps. What all we need to follow here. Here you guys can basically see that I do have the name of the project, a description, okay? So you guys can refer the description and also the outcome. Let's see the steps, which all we need to follow. First up, I need to take a pencil tool and make lines accordingly. Okay? We can also make shapes if you don't want to make line. After that, you need to take the width tool from the toolbar. Once you take the width tool, you'll have a different type of lines from there. You guys can basically make those, after that, change the width of the shapes accordingly. Okay, point to point. You guys can actually change after that, adjust the width part by part, which I just told you right now, that you can actually change those part by part. After that save that I file. So I is basically the Adobe Illustrator file in your system. Please upload it in our project panel that I can check all your work from here and get back to you with a suggestion or I just very eager to check how you guys have understood and how you can use your width tool. Let's see how you can actually start working here. As you can see, I am in one page here, okay? So from here, basically the first thing which I'm going to do is I'll come and I'll be taking my pencil tool from here. Okay, So I'll just remove my Caps log and I'll just double click here, make sure that I do have my smoothness here and I will not keep this one as selected. Okay, so I will just unmark that. And I'll click on. Okay. Now let's try to create some designs from here. Okay, I will try to create some designs from here. We can try doing that one. So as you can see, I can make some designs with my mouse. We can basically do that. Okay, I do have this shape, I'll make this one. These are quite smooth. When we use this one, I will take this one from here. Maybe I'll just make a circle. Just a rough circle here. As you can see, I do have all of this here. And now what I'm going to do is I'll come here. Okay? So this is basically the width tool. So I have selected the width tool from here. And as you can see, if I select the width tool, now if I just zoom in a little bit, okay, here you guys can see I can actually keep the size of this one quite bigger, okay? I will just make the strokes quite visible. Maybe I will just decrease this one to 0.25 And now from here, I can actually take this tool here. All these points, I can actually move this around the way I want. Okay, from here I will do this, I'll put this one here, so I can actually do this one by one. And it totally depends on us how much I want to change the width of all of this. Okay, Here you can see I am just changing the width you guys can for different shapes as I'm doing this one here. Here you guys can check out how I'm basically doing this spot, can actually do this one somewhere here. As you guys can see, I do have a particular shape here. What you guys can basically do is from here, as you can see, I do have this light if I want to make it smooth like this, if I want to take something like this also, I want this one to go somewhere here. Okay? Basically, we can work with this here. If I want to take something broad, I can make this one broad as well. Okay? I'll make this one broad here, maybe here, I will just make this more broad here. I can actually use all of this option and I can make these changes here. Okay. Here I can see which part basically, do I want to make some changes here. You guys can actually see, look out. And you can make those changes accordingly in all these options. If I want to use some different width, I can use different with as well. Suppose now with the selection tool, what I'm going to do is I'll just select a few of these things here. Okay, for that I am going to fill this particular strokes, suppose I will just discolor here. Now what I'm going to do is I'm going to give them outline here. Okay. If I'm just giving them outlays can check out the work. Also you guys can fill in all of this here. Okay. Here I have created some now I have selected this. Increase the stroke from here, maybe till this much. Go to the field option, select yellow here, we can do this one. Selslaya from here. Increase the stroke. Or I'll just decrease the stroke of this one quite a bit. And go to the stroke option, select color. Now again come to the Field option and select a different color here. Or I will just keep this one something like this. Lastly, Sellaya, and fill this one with something red. But I will decrease the opacity of this one from here. Okay, I will just decrease this one from here. Okay, I will just decrease this one till this much for the strokes. I will again check the strokes. I'll take a different stroke color. From here I can actually manage what color do I want? This is drawing which I have made. Now again, I'll come here and I will click and I'll save on my computer. From here I will just name this one as class project one. Okay, I can just save it in my system, from my system basically. I can just upload it into our project panel. You guys have to just save this in your system like this. After that, just copy and paste it into our project panel. I'll be eager to check out your work. What do you guys have done? See you in the next class. Till then, take care. Goodbye everyone. I'll save. Okay, then by. 15. Class Project 2: Creating logo shapes: However you want. And welcome you all to another class project. Okay, now this is our class project number two. Here we'll be creating logo shapes in illustrator. Okay. I'll be showing you guys how you can actually create different shapes. We'll be learning about all that in detail here in this particular class. Let's not waste time and let's get started with this chapter here. As you guys can see, I do have the name of the class project which is creating logo shapes in Illustrator. Okay, Here I do have a description and also the outcome which you guys can basically refer. But I'll directly go to the step number one is you take your pencil tool or pen tool to create some shapes. After that, select all the shapes and use the shape builder tool. Okay. We need to select all that. After that, if you want to combine the shapes or cut out the remaining part, you guys can basically do that. I'll show you shortly how you can do that and also add different colors to your shape after that same safety AI file, which is that of the illustrator file in your system. After that upload that AI file into our project panel. Okay, let's see how you can start doing that or make a logo shape in Illustrator. Here, I do have my work space first. What I'll do is I'll select the pencil tool. I'll make sure that it's smooth and I don't have the keep selected option. **** and I will be creating some lines here. Okay, I will create some lines here. Okay, I will create this one here. Again, here, what I'm going to do is I will select some bigger lines. Okay? I will draw some bigger lines here. Here. I will also make some lines. Okay? Or I can just go back, will select this layer and I will make this smooth. Okay, I do have this one. What I can also do is I can select this part from here. I'm just making some rough design. Okay. You guys can actually do this one or you guys can check out different styles as well. Here as you can see, I do have this layer. I'm done with the first step. Now what I need to do is come to the selection tool and I will select this whole thing here. Okay? As I've selected this whole thing, what I'll do is I will just delay this bits from here. For that, what I need to do is I need to select the Shape Builder tool here. As you can see, I do have plus sign once I've selected the Shape Builder to. But if I click on Alt and here it becomes a minus tool here. Okay, here you can see I can delete all these parts which I am selecting. This is how I can actually select all this. And I can also delete all of this. Okay, here. I can also delete here. I will delete this one as well. Okay, I will delete this, this part, and on top of this part also, I'll delete here. You can see I do have a particular shape, which I can just move around from here as well. Again, select this. Now I will just move around this one somewhere here. If I just want to add this one, I can basically add this one here. I will add this one somewhere here as well. So I'll select this, maybe I will just add this one somewhere here. Okay, I do have this one ready. Again, select this whole thing, and again select the shape builder too. If I want to combine both of this or all this thing here, I will just select on this one here. You can see I can do that here. I will select this part. Suppose I want to totally select this whole part from here. And this part as well. Okay, I will be selecting this and this one. Maybe I'll select one with this one as well. Okay, here, I will select this layer as well. Here as you can see, I do have this now here in this particular part, if I want to put on some color for that, what I need to do is I will just increase the stroke from here. Okay? Suppose if just select this layer, okay, I want to change the color of this particular layer. What I can do is I can come to the Field option or select this. Come here, select this part, Go. Fill option. From the fill option, you guys can choose any color which you like. Again, come here, Maybe you guys can also decrease the opacity if you want to decrease. Okay, guys can work with all of this from here as well. After that, select this path. And this path, you can actually select different colors. If I want to change the opacity, I can change the opacity as well. Here I will be able to take some different colors. Suppose if I just delete this one, maybe I will select only this path. In this path I will select a blue color. But here I want it sky blue. Here as you can see, I am done with this particular shape. You guys can actually do it vast. Okay? You guys can make it quite bigger. But as I have already showed you guys in detail in my tutorial, if any problem you guys face during the whole thing, you guys can always refer my video, this one is done. From here, you guys can come to the file and go to save, save on your computer. From here, you guys can actually name this one, okay, class project two. Or you guys can actually, according to yourself, okay, I'll just name this one as class project two. I'll save it in by system and make sure to upload it into our project panel. Okay, I'll be eagerly waiting to check out your work. How you guys have done or how you have selected your shapes of creating logo in this particular shape. Now I want to create any kind of logo for that. What I need to do is suppose if I can also rotate all of this from here. Here, as you can see, I can also rotate if I want to group this one, I can actually group all of these layers from here. Okay, I will select this one. Now I group, if I just move this one, I will be able to move it properly. Okay, here I do have some issues due to which I'm not able to move this one. Okay, Here I can click on this, I can select all these layers. Okay, Here you guys can see I do have all this. Okay. Now I can actually create a group from here. Okay. If I select this one, now I can move around with my text box. If I want to create any logos, I can actually give their name or individually. Also, I can move all of these around. If I want to keep this one somewhere here, this one want to keep this one somewhere here. I can do all of that. Select this one grouping. Okay, I will just group this one. Okay, I will just select this and I can just move around. We can make a quite nice group. You can actually put on different type of writings here. Okay, to create your logo. Hope to see you home in the next class. I'll be eagerly waiting for you all to send your particular project. Till then, take care. Goodbye everyone.