Transcripts
1. Introduction: Are you tired, spending
hours in creating videos? Do you find learning technical
stuff tedious and boring? If so, you're not alone. Many people find to be video
etting a very daunting task, especially when it
comes to learning technical aspects of it. But what if I told
you that there is a way created videos with three D animated characters that is very easy and not
complicated at all. Well, here is one
with create video, you can create an
amazing videos with animated characters with these
and with minimal technical and you don't have
to worry about technical aspects anymore. Created is a powerful tool that allows you to
create professional, great videos for social
media business and for advertisements with
three D animated characters. In no time. With this
intuitive interface and easy to use features, you can create astunting videos that captivate your audience. And the best part, again, it is extremely simple to use. All you will need to
do is just to follow my step by step instructions. And you'll be creating
professional looking videos with three D animated
avatars in no time. And by no time, I mean no time, you will be able to
create them in under 1 hour. Yes, you heard
it right under 1 hour. And I will guide you through
the entire process from start to finish and
put this clamor here. I understand that my speech
can be quite unclear sometimes and I can speak very fast. I
apologize for that. And to alleviate that,
I will be including close captions with every
single one of my videos. So don't forget to turn them on to not miss any important bits. And it's also completely
fine to slow down videos, to not miss any of
the important parts. It's also essentially,
if you will, miss something and
if you feel like I went through
something way too fast, it's also fine to rewind the video and watch
the parts again. That's simply how video learning works and
there is no shame. What are we waiting
for? Let's start creating amazing videos with Create Studio right now and take your videos to the next
level. Let's get it started.
2. Installation and Overview of CreateStudio: First things first,
congratulations on this course. And you will need one
thing to get it going. And of course, the software
itself, Create Studio. You need to install it in order to be able to follow
my instruction. To do so, you need
to go to Create Studio.com and just download
software from there. Mind that the software is paid. However, for the
purpose of this course, I will hook you up with
a free trial for you to follow the course
and then decide whether you want
to use it or not. And that is an exclusive
offer available only for my students
after you install it. Let's quickly glance
through interface to understand what the
hell is happening. Because especially
if you haven't done any video before in the past, it might be a little
bit daunting. Even though it's really when you open create
studio for the first time, you'll see a bunch of
different projects, templates, tutorials, settings,
et cetera, et cetera. You don't need to focus on
this too much just yet. Don't overwhelm yourself with the things that you
might not use just yet. We're focusing on the
initial results first, Not on perfection,
at least not yet. And to start, all you need to do is just click New Projects. And here we'll see
that interface is divided into four main parts. It's your Preview window,
where you will be able to see anything and everything that is happening
in your videos. It's your timeline
where actually editing and every manipulation will be actually happening. It's your top menu where you
can add additional features, save project, publish project, or get access to the support. And last but not least,
very important part is the where every element including
your media, audio files, transitions, settings, and most importantly three
D creator is located. Now again, you don't need to
focus on that too much yet. I'm showing you this
for you to just get familiar with whatever is happening in front
of you, that's it. You don't need to
know what every single button does just yet, but by the end of the course,
you'll know most of it. And first things first,
we're going to focus on creation of our three
D avatars first. And we're going to be doing
this in the next section. So whatever to do, just get it started and I'm going to
see you there. Take care.
3. How to make Animated 3D avatar for your videos: Now that you know
of Create Studio and you have everything set up, now it's time to get to action. And this video, we
will be creating our first three D avatar. And we'll not just create it,
we'll let you learn how to animate it and make it do anything that you want it to do. With Create Studio,
it's extremely simple, but first, let's get
everything set up. After you stall Create
Studio and launch it, you'll see this
window right here and what you will need
to start a new project. Right now, we're not focusing on aspect ratios or
anything like that. We're just going to
start a default project and learn how to
create an avatar. And we'll solely
focus on creation of the avatars and nothing
else, create a new project. And you will be greeted with the full interface
of Create to create. Through the avatar, you
have one of two ways. First, you can go
into Studio Tab and go to Through the
Creator from there. Or an through the creator has its own tab and you just
simply click it here. You'll be created a
few different options. In this case, I have only two, but in the future you'll
most likely have more. All you need to do
right now is to choose the base
archetype of your three. The avatar in this case we are
female lanka and male top, but you can't use them just yet. First you need to download them by clicking Download Button. After waiting just
a few seconds, all you need to do is
just select the avatar itself and drag it
to the timeline. And just like that, your three
avatar is on a timeline. And you can do this, not
just with one avatar. You can get to the drag and drop multiple avatars on the time, just make sure that
you're dumping them on different tracks. And just like with any other
video editing program, the avatars on a
top track will be visible on the top of
all the other avatars. This is just to be sure when your avatars will be
interacting with each other. And now we'll move on to the customization of
an avatar because, yeah, we don't want to
default avatar, right? So on you to do to customize your avatar is make sure that you have selected your
avatar clip on the timeline. And on the left you're going
to see your avatar menu. Now if you have a dual panel
layout on your interface, you will see that menu
on the right side. And if for some reason you
will lose track of that menu, it will be available
as a separate tab with all the rest of the
tabs on Inequate Studio, and you can click
it to access it. And now what you'll need to
do is customize your avatar. You can customize your avatar by changing a bunch of different
stuff like clothing, hairstyle, facial
hair accessories, and most importantly, colors. You can customize colors of
every aspect of your avatar. What you will do is select
the looks of your avatar. Just take your time, customize your avatar and we can
move on after that. But if you're done you want
to continue, let's continue. One more thing that is important
to understand it is that some actions of your avatar will include laptops
and phone screens. And also some of the coding of an avatar includes the logo tab. Now if you want to
customize all of those aspects like
what's visible on a PC screen or what's visible on a phone screen or what's
visible on the logos. You can access the
logo menu and change, customize everything from there. Also, you can
change the lighting of your character
through the light. Now if you're done with
customizing your avatar, most likely you don't
want to customize him again in the same
way over and over again. And to avoid that, we'll save
your avatar as a preset. To do so, make sure that
your avatar is selected. Go to the preview window, right click on your avatar
and click Save as Preset. And now your avatar will be saved as a
preset and you will be able to use him across your
projects and to access it. All you can do is just go to the preset step in
three D creator. But now we're going
to move on to the most important
part, it's actions. Having a good looking
avatar is great, but you want it to move and
perform different actions. To do so, you'll need to
move on to the action stab. And you'll see the first
action is already selected, and usually it's an idle action. Now what you'll need to do is select a different
sequence of actions. Mean that what different
actions will follow each other? To add different actions, just click Add the
new Action button and select whichever
action that you want. You can select any
number of actions, and you'll see that each action will be added into the timeline. And which each action will
have its own starting time, ending time, and
its own duration. And if you want to change
that on the timeline, make sure that you have selected your three D avatar and move the starting or ending
squares anywhere you want, extend them, contract them,
or change their positions. Now, each action has
its own beginning, its action part and its end. And it all flows seamlessly
between each other. And you can actually customize
some of those things. And you can actually customize some of those
actions separately. Like for example, you can select whether you want your avatar to blink or what facial expressions you want for each
and every action. For facial expressions,
you can choose between non happy,
sad, or angry. And for transitions from
one action to another, you can actually disable
startings or endings, meaning that the action will immediately start in the middle. Like for example, with
the thumbs up action, the action will not start from the hands down and then
go to the thumbs up. It will immediately start
with a thumbs up action. It is a bit sudden and jarring, but can work greatly
for your videos. And it's great to have.
And basically this is it. You know how to
create your three D avatar and how to animate it. Now one more thing to know
is that you can actually position your three D avatar in any place that
you want to do. So make sure that you
select your avatar on a premium window and just move him into whatever position
that you want him to be, including zooming
in and zooming out. If you want your avatar to
move across the screen. You can do this
through the Motion tab by selecting in
and out positions. But you don't want a
lifeless three avatar. Even with the moment in actions, it will still be lifeless until you will give
your avatar voice. In the next lesion,
we're going to focus on giving your avatar voice, and most importantly,
we're going to focus on how to lip
sync your avatar. So we're going to see you
in next video. Take care.
4. How to Lip-sync with your 3D avatar: Congratulations on the creation
of a first three avatar. Now your avatar has looks and can move and
perform actions. However, what we want
right now is a voice. In this lecture,
we're going to be giving your avatar voice. To do so, we have a
few different choices. Well, we'd rather have
two different choices. First is to give your
avatar your own voice, or anyone else's voice. Who would want to lend
their voice to your avatar? Or we can generate
the voice using AI. Now let's learn how to do that. To work with voice and audio, make sure that in Create Studio, you've selected the music tab. There's a tab where
you can select music effects and
speech options. Now let's start with
recording your own voice. To do so, in a music tab, you need to select Record tab. Now you need to set up
the environment for the. Then there are only few
things that you need to do. First is select the
microphone that you want to record on and make sure
that it's connected. Second is whether you want
to record in mono or stereo. Last but not least is
turning on the countdown, just to make sure
that you're ready. After that, the only need to
do is just start recording. Say your own voice line, whatever you want
your avatar to say. And after you're done
speaking, press Stop. Now you can play and
listen whatever you recorded and actually
import the recording. Make sure that you click Import, because otherwise you will not be able to use your recording. Now, your voice
recording will be imported into the media
tab of your project. To use it, select this recording and drag it on a timeline. Usually it's a good courtesy to drag it below the
video timeline. Listen to your voice
recording and make sure to cut out all the
parts that you don't need. Using the cut tool. Delete all the unwanted
and unnecessary parts and connect everything into
one single audio file. And that's basically
it. And now all you need to do is just to lip
sync with your avatar. But we're not going to be doing it just yet because we'll go through the AI voice generation
as well before that. Now to have an AI voice
generated for you, all need to do is just
go to Say Music tab and then go to the Speech tab. Here you have two options. First is Create Studios
voice generator, and the second is
Google voice Generator. First one is paid and have
limited characters to use, while second is completely
free, quality wise. Of course, the paid
option is much better and we're going to
be using that right now. Now all you need to
do is just to type the text that you want
your D avatar to say. Select the voice that
you want. You can select between multiple male
and female voices, and you can actually
review each and every voice by pressing
the play button. You can also play around
with stability and clarity. But I would not suggest
you to do right now, just yet, unless you know
exactly what they do. And then just press
Generate speech. And in a few seconds the speech will be generated and
you're going to be importing it in
exactly the same way as you did with your
own audio recording. And after that,
you're going to go to the media tab again
and drag and drop AI generated audio in exactly
same way on the timeline. Now all you need
to do is just to select the audio clip or
multiple audio clips. If you have one on
the timeline, right, click it and select sync with whatever adverti name that you will have there,
and that is it. Now your advert
is fully lip sync with your audio.
How easy was that? All we have left
to do is to adjust an audio and actions to
interact with each other. Because you don't
want to disembodied actions while you speak. Completely different
things, right? Just adjust the different
actions to the audio. If you think that you
don't need some audio for the actions or
audio is too short, just make sure that you'll
cut up your audio and line it up with an actions
on an action timeline. Rest is up to your creativity. Now you know how to create your three avatar
and how to use it, but how to do certain things
is not a difficult part. Difficulty is why to use
those different features. And in the next section,
we're going to focus on practical application of
three avatars in your videos. So I'm going to see
you there. Take care.
5. Practical Applications of 3D Avatars: Welcome to understanding of the practical applications
of using three D avatars. Now you know how to create them. As you can see, it's not a
very complicated process. All it is limited by is your imagination and
your creative process. You can make your three avatars into anything that you want. Don't worry, we're
going to go into more specific uses in
the next few lectures. But right now, you
need to understand why do you need to use
your three avatars? Main thing to understand
is the human as a full time content creator that has been doing
this for years now. And one of the most
important part in understanding
and establishing connection with your audience is having a personal connection. And one thing is having a disembodied voice
behind the screen. Another thing is having
actual personal connection with the one who you
are speaking to. Many people for
different reasons do not want to use their
own faces for that. The reason might be that
person is shy in front of camera or just don't
want to show their faces. Or the person might be a
company face or doesn't want to tie a specific face or
voice to that brand name. Those companies want to
have their own avatar which any employees of those companies can use for the promotional or educational
purposes for this company. And for that reason,
Three Avatar is actually a very powerful tool to utilize. Again, it is one thing to hear someone just to say things, another thing is someone
to tell you things. Human connection works perfectly with the video and you need to be utilizing this in every
single thing that you can. People don't want
to follow things, people want to
follow other people. And this three avatar
just creates an anchor, some recognizable face
behind your brand, whether it's personal
or the company's. And it actually has been
proven time and time again. As an example, if you're using shorts or Tiktok or
Instagram reels, you might have seen quite a
few creators who are using this dual Paine video format. Or one part is a person
speaking or an avatar speaking. Another part is actually bureau of what they're speaking about. This two pane
division of the video works quite well because
of the human nature. And the human nature is that we really can focus on
one thing at a time. We really need something
to be distracted. This video is actually
creating those distractions. And this distraction is the same video is
the same content. And if you don't
agree that people are not focusing on one thing, let me just give
you one example. What was the last time when
you were conversing with the person and not
doing anything else, just focusing on a single
person? That's it. Probably it almost
never happens. You either fidget something in your hands, you write something, or you are holding your phone, or you're doing something
alongside your speech. That's because how the
human nature works, despite people seeking
the human communication, they also cannot focus on
that single thing as well. So no matter how
great your video is, people will be
distracted from them. And when you have additionally
your avatar or your face, if you want to use
it and you have additional distraction
for for your viewers. And this distraction is
within the same video. It's a wind wind for both of
you, your viewers, and you. So using these three D
avatars can be very, very beneficial for your brand. Don't miss this
opportunity to use that. But one thing is
telling me what to do, another is telling me how to, how to wind, why to do
this on specific examples. And next sections will
be all about that. And utilizing the create studios full power for your social
media and for your business. So let's get to
the next section.
6. Creating Instagram Reels, TikTok & YouTube Shorts: Now in this section, we're going to be focusing on utilizing full power of create studio in creation of different videos. This time we'll be focusing on creation of the short videos. How we will be doing
this at the hard way. We'll be doing
everything from scratch. We'll not be utilizing any
templates and any scenes. Those things we'll be doing in the next lectures to see
how easy can it really be. Right now, we're going
to focus on a hard part. So what we'll do is we're
going to create a new project. We're going to focus on a
completely empty projects. Right now, what we want to
do is to create a vertical. In order to have
a vertical video, we need to change the
resolution of our project. To do so, make sure that
you have nothing selected. And go to the Settings
tab and the Stat tab. Choose the Resolution tab, and right here choose the
vertical aspect ratio. It will select ten
vertical aspect ratio, but you can actually
choose between different aspect ratios of
the different social media. And that's if you
don't know what those specific numbers means and you just want to
create specific things for specific social media. In this case, we're going
to focus on Instagram real. What we'll do right now
is we're going to create those dual pin videos like the ones that I talked about
in the previous video. And it's quite easy to be fair. All you need to do is just
divide the video into two different parts and work
on those different parts. To do so, we're going to
use the masking feature. What we'll do right now is
again, by selecting nothing. Select a plus on the top of the previous window
and select rectangle. We're going to have
a rectangle created. What we'll do is we're going to go and snap it to the bottom. Resize all the way to the width. And then move it up until it will reach
the center of the. That's it. Now what you
create is so called mask. And we will use this as a canvas for our bottom
video on the bottom. What we can use is
two different things. First thing is of course you can put the video of your own, and now you can upload the video of your own through
the media tab, or alternatively, we can
go and insert an avatar. Now when you insert an avatar, the avatar will be inserted
on the top of the rectangle. And what we want is this
avatar to be restricted with this rectangle and
not go outside of it. To do so, make
sure that you have selected your avatar
and settings. We know it doesn't matter
whether whether you are in customized
actions or presents. Scroll all the way
down and select Track and in a mask tab, select
the round the rectangle. What will happen right
now is the rectangle will disappear and any
part of the three, the avatar that is outside of this rectangle will
disappear as well. Make sure also we select
an alpha because Luma is actually selecting
the lighting and alpha is actually
selecting the opacity. And scroll down your avatar to be fully in this rectangle, resize them a little bit
and have it just like that. Now we have an avatar
restricted to the. We're not going to focus
on the specific actions of an avatar. Let's
leave him like that. What we'll do is we'll also add the background
to this avatar. And to use this,
we're going to use the stock features of
the create studio. To do so, we need to
go to the media tab, select the stock, and search for the specific video or
image that you want. In this case, I'm not
going to use a video, I'm going to use an image and search for something
like Office. I'm going to select an
import for the image that I want to go back
to the Project tab, because my image will
be imported there. Now all I need to do
is just to drag and drop my image below my avatar. Now what you'll see is that the image is not confined
to the rectangle. What you'll need
to do is confine the image to the rectangle
the same way that we did with an avatar by
selecting track mat round the rectangle
and go to alpha. Now we're going to change
the position to make it look like the Tom is in
an office. And that's it. Now what we'll do is
we'll just make Tom wave. You're gonna press the plate. You're gonna see that Tom is actually waving and he looks
like he is in an office. Add all the audio that you
want and what we'll do is on the top we're going to add something that the
Tom is talking about. And in this case we are going to go to the
same media tab. Go to Stock, and we're going to use the stock videos
in this case. And we're going to
open gallery right now to go and see if all
the images fully. We're going to use Pexels and Pixabay as a stock
video image website. And we're going
to select some of the stock videos like this one. We're going to preview this. It looks fine. We're going
to press download now. We're going to wait
a little bit and it is downloaded to our files. Go to project and image
video is right there. What we'll do is we're going to put it on top of everything. Now as you can see,
we have an issue now. This is covering everything, right? We don't want to do
this now we're going to put is on the bottom
of everything then, because we don't want
this to cover our tom. And then we will resize it in a way that it would
fit to the top. We cannot fit it fully, but we're going to fit it
as much as we can. We're going to expand
these images a little bit more and
with a press play, you can see that video plays on the top and Tom is
waving on the bottom. You can add as many videos
as you want, just like that. All you will need
to do is to add some actions to the
Tom on the bottom. Add some voiceover way. Speaks about that there
are different things and on the top bar which will be the bottom of the
timeline because we don't want Tom to be
covered by anything. We can put any bureau that we want for any news
or any information. Alternatively, if you don't
want to play with this one, you can actually confine
top and bottom images by grouping them and by selecting the separate mats
like in this example. I'm going to select
rounded rectangle, the background image and tom together by holding
control or command button, right click and create group. If you want to add
anything in this group, I'm going to double
click the group on a timeline and it will
open the group separately. This is where I can
addit this separately. Go back to the main time
line and I will also create a separate group for
the top as one as well, to not confuse you. To do so, I will create
another rectangle. Make sure I'll select
the rectangle, put it on the top,
put it on a corner. And resize it in a way that will cover exactly top
half of an image. I will make sure that round
rectangle is on the bottom. And then what I will do is I
will confine the top video by using the track map function to another rounded rectangle. Again, by selecting alpha. And that's it. Now even if
I will recite this video, it will not be overlapping
with anything. And what I will do is, again, select both of those
things and create group. Now what I can do is I can rename the group by
calling it bottom and as simple as that.
As simple as that. Now we have the temple to
create an amazing video. But we also need to
export this right. To do so on need
to go is to go to the right top part on
the and click Publish. Select Video as a type,
select them before. As a format and in quality, you want to select
either standard or high. I usually go with high. The 12 megabit/second
bit rate size is already selected for you with last
frame hardware acceleration, apply audio normalization,
and select an output file. An output file means
where it will be saved. After that, all
you need to do is just go and press Render. And that's it, Your video
will be done and you can use it in any way that
you want by uploading it. Do Instagram reels on
Techtalk, on short, or whatever place that you
want. It's as simple as that. The next video we'll
be focusing on creating a different
format video. But this time we're going to
be using some of the most, some of the most amazing
create studio functions, which is seeds. I'm
going to see you there.
7. Creating YouTube & other long form videos: Congratulations. Now
you know how to create videos with create video,
but you don't know it all. You know how to make
videos conventionally, which is not the best
way of doing so, even though it allows
you to do most things. But right now we're going to be doing something a
little bit different. We're going to be
doing some kind of Youtube video or any
other long form video. And I'm going to
show you how you can use Create Studios scenes in order to increase the speed of your editing at
least ten fold. This time we're going to launch Create Studio in
the same way and go with the creation
of the new project in the exact same way. But now we'll make sure
that the same setting that we used in the previous video
and in the same resolution, we have a standard
setting selected. And in the same way you can select presets
like for Facebook, Youtube pictures,
take talk, et cetera. But right now we're
just going to choose the default Youtube NDP, full HD video, but
once does not. This are your regular
widescreen videos, the same aspect ratio
as this video has. In this case, we're
not going to be doing full video as we did
in the previous one. We will do a small
part of the video. In this case, let's
assume that we are making a product
comparison video. We're comparing two
different products. You have the same role, meaning the same
regular video as this. One is where you talk to your camera and explain
about different products. But now you need to actually show the comparison on
two different products. And for that,
usually you need to build up the animation yourself. But not with create video. What you'll do with Create
Studio is go to scenes. And scenes are kind of like a small templates of
the parts of the video. Or it can be even full video. If you want, just
make sure you have selected correct
aspect or ratio. In this case, it can
be the white screen, the vertical or the square. And then find the scene collection that
will suit you the most. In this case, I'm going
to choose this one. And right here we have
the promo that we want. Right now we have the
scene that we want. This is promo 12 in this case. And all I will need to
do is just drag and drop in exact same way I do
with any other video. And when you press
Play, you will see that this is the comparison
of two creams. What you will do is change with any other products
that you want. Now, how to do this? Now the
scenes are actually groups. We do groups in a
previous video, and in this case these groups
are made automatically. All you need to do is
to unlock the groups. Just double click the scene
and you will see that this scene includes
more scenes within it. And you will see every
single part separately. Like for example on the bottom, you see that there
is a background. And you can change
the background if you want, like for example, by changing its colors to, let's say to something
like a gray. Or we're going to go to
something of a greenish color. Or what we can do is go to
a popular color tab and choose one of the
colors that are popular Cony to create studio. And by the way, if
you want to save the colors in the favorites, all you need to do is
just press Plus button. Now with our products, what we'll need to do is
change the product loops. Like for example,
the product one just double click product one. And as you go see this
is the image of product. In order to change it,
you will need to click the Replace Media
button and it'll show you all the media that
you have in your project. Or otherwise, you can go with a global media folder or choose
one of the stock images. In this case, I'm going
to choose some of the stickers and I'm going
to search for headphones. I'm going to import this one. And we can't replace media
by just changing the image. We're going to go back to see
and you'll see that you're going to have a different
image right here. And we'll do the same for
the product too as well. We're going to select the image, you're going to select
image, press, replace media. And just choose
something different. And as you can see immediately
we have different images. And then afterwards,
all we need to do is just change texts. We have text, one that
are the top text, which are the name
of the products, the text and icons,
one text and icons. And when you will
change everything, you're going to have a final
animation just like that, that you can insert
in your video. It's as simple as that
and it's very powerful. But that's not all.
But the longer videos, we will need a bit
more than that. Now for the purpose of
this demonstration, we're going to insert
some bureau in the beginning and we're going to use stock
footage for that. But this purpose is we're going
to go on to stock images, go to videos, and we're going to search for something
with headphones. We're going to
preview this, if it will work for us. Yes, it will. We're going to download
this, Go to Project, and we're going to insert
it like that on a timeline. As you can see, there
is one video and then it's going to immediately
go to the other scene. Switch is a bit jarring, it's quite immediate
and we don't like this. In order to alleviate
that, what we can do is we can actually
change the transition. To do so we need to
go to the transition Sap and download the in
transition that we want. In this case I'm going to
download this transition and just insert transition
between those two. You can see that you have a real transition or
concealed transition. By concealed and it means that transition in the
beginning or in the end. Let's press play and it
immediately shows up. But it's a bit jarring as well, because this image just
ends. Video just ends. There's nothing to
transition from. So what we can do is
we can put this on top just like this and you'll
see how it will work now. And yes, the transition
looks quite perfect. Also forgot one more thing. You're going to
actually change all the aspects of the scene, right from the base layer by
changing image to the left, by changing image to the
right and all the text right from there
without accessing anything within a time line. There are also a
few other things that you need to add that are extremely important and great
Studio helps you with that. And it is of course the music. What you can do is just choose
the music that you want, future base, listen to it, whether it's a good music
or not, press download, wait for it to be downloaded, and just drag and
drop down there. You can also, of course, set
up the volume for it for it not to be overwhelming
over the regular audio. And if you're a Youtube creator, there is also one more thing that you will also want to add, and it is of course,
subscriber animations. To do so, you need
to go into studio, go into separate Youtube tab, find the subscriber
animation that you want. In this case, like Jack pushing the logo, looks quite good. We're going to download
it, of course, first, and then we're going to put
it on top of this layer. And if we're going
to press Play, it will show up as
subscriber animation. It's too big. We don't
want this to be that big. What? We want it to be near, close at the beginning before the actual comparison
will start. And we want Jack to be
a little bit to decide. Let's make him a bit smaller
and do it like that. Press play, and this is how the subscribe animation
will look like. Quite cool and quite fun. And of course, in
the end, all you will need to do
is go to publish. Select the quality like we
did in the previous video. Make sure you have
video and M before. Select an output file and of
course render it. That's it. Now you know the aspects
of usage of scenes from Create studio and you know a lot of things that a lot of
great Youtube videos have. And of course you can use
them in your own videos. Again, the creativity and your imagination
will be the limit. And in the next
video, we'll take a look at something
very important as well, antic creation of
the full ads using Create Studio by using
Create Studios templates. And you'll see how easy
and how fast it can be. I'm going to see the
next one. Take care.
8. Creating Ads and using Full Templates: Well, you've come a long way. You've learned the
basics of create studio. Created your own three D
avatar and made it speak. You learn how to edit
videos by yourself, by your hand, and you
learn how to use seeds. But this last method, which will use the
creation of ads, is even simpler
than that and will require even less
knowledge and effort. I'm talking about templates. Templates are probably one of the most powerful
features of Createdo. Which allowed you to basically just change
a few things in order to make a final video
without any to use it. All need to do is just to go to a home page of your
Create Do dashboard. Instead of pressing
new projects, you're going to press templates. Just press templates and
you will see a bunch, bunch and bunch of different
templates to choose from. And all of those temp, templates are completely customizable, so you don't actually have
to start from scratch, just like you did with scenes. But unlike scenes, this are
basically a final video. And we're going to use
one of the templates. We're going to choose this promotional
template right here, and this is the 32
second template. And you can choose between
three different aspect ratios and it will adapt to the aspect ratio that you will
choose right now. We're not going to
choose vertical and landscape because we
already did that. We're going to choose a square
just to see how it will. And just like it
happened with scenes, you have different
groups of scenes and every single one of
them are customizable. And of course you
also have music. And to change every
aspect of those images, all you need to do
is just to select the scene and you will see
all the changeable aspects. Like for example, you can
change the big sale of the year title to change
the title of the whole day. Like for example,
instead of Black Friday, you can use a Father's Day or Mother's Day or Christmas Day. And you can change the
date. And you can change the colors as well to
more reflect your brand. With the second scene that
features different products, you can upload your own
products to feature them and it's as easy as
pressing replaced button. All you will need
to do after that is just upload your own images by pressing Import button and just choosing whatever
image that you want. Extremely simple and
straightforward. And again, you can
change the text as well and change the
color of the overlay to give it a different
tint that more reflects the holiday or
your company brand C. Three is also interesting
because it has one of the interactive elements
like a number counter. In this case the number just go 25-50 And with the smooth
and beautiful animation, well instead you can
change the percentages, like instead of
50 you can finish with 75. And it
will go smoothly. 25-75 and it will look
insanely beautiful. And in the same
way, you can change the colors and
text here as well. Four is kind of like a mix
and match of everything. By having a bunch of
different numbers, by having different numbers, different texts and
different images that you can also mix and
match and customize. And the same thing would
be happening at in five. It's extremely easy to work with and every template is like that. And of course you can
change the music as well by deleting the old one
and adding a new one. And you might think, why
you would want to use this. Well, why not Imagine that you have to quickly come
up with an idea for an ad for Facebook
or for Instagram, or for anything else. Well, with this you'll be done practically in a few minutes. You're going to have a
fully ready made video ad, or for example, you want to
make a short explainer video. Just change some text,
some images and you have very short and
sweet explainer video. Or maybe you want to
have an end screen for Youtube. Just do
it in a few click. How cool is that? And
most importantly, you can actually
combine this with all the knowledge that you received in the previous videos. Like for example, you can
add a different scenes to this template to
expand it even more. Or you can do
everything manually, like in a video before that. Again, sky and imagination
is your limit. Whatever you will
think, you can do it. And it's extremely simple,
without overcomplicating. And just with every
other videos, all you will need to do here
is just press Publish and render the video in the quality and resolution that you want. That's it, And now,
congratulations. And now in just a
matter of minutes, you know how to make your own
videos. How cool is that? But let's talk about
this in the next video, I'm going to see that.
9. Final Thoughts on CreateStudio: And congratulations. Now you know how to
use Create studio, and most importantly, you
know how to use it well. Create study is a powerful
platform that allows you to use the power of templates
and AI at your fingertips. And by utilizing
all its features, you are going to become
a great video creator. Or if you want to do
this for your business, you will also benefit
your business by a lot because content
is the future. Create studio is amazing
software and most important, it is not boring to use. We humans are very
simple creatures. We want satisfaction
with the completed work. And the faster you
complete the work, more satisfied you are. And the faster you
complete the work, more work you can
actually complete, and more satisfied
you will become. And in this case,
with Create Studio, you can complete a lot
of work very, very fast. And it's not dropping on you all the unnecessary things
that most likely you will never use unless you are the top of the line of the professionals,
of the professionals. So start using it, unlock your potential, and
create amazing things. And speaking of amazing things, practice makes it perfect. And let's talk about the
practice in the next video.
10. Class Project: Now that you know how
to use create video, you will need to start utilizing it and this will be the
first step in doing so. Here is my class
project for you. I want you to create a video. I want you to create, explain a video of
anything that you want. Just explain certain terms for business from your
hobby or anything, but use it by utilizing
templates, scenes, stock videos, and
most importantly, three D animated character
and by lip sick, you can use your own voice
or AI generated voice. And I'm very interesting
to see, Oh yeah, if you haven't grabbed
Create Studio just yet, this is how we can get
free trial for it. Again, it is available
only for my students. Don't miss this opportunity. Can't wait to see your works. Thank you for sticking
around with me and I hope to see you in
our future courses. Thank you and take
care. Bye bye.
Nick Nyxson, YouTuber & Content Creator
