Transcripts
1. Course Introduction: Hello, honey. Hi there. How is our animation? Not too bad. Hm. Hey, what up. This is
Heels Creemore within ten years experience in Motion Graphics and
Tudio animation. Today, you will learn how to create infographics
Studio animation. This course is divided
in three parts. The first, how to
illustrate room, characters or environment of animation in Adobe Illustrator. And the second part is
how to rake animate your project in Adobe After effect without
using any plugins. The third part is
the final part, how to create sound over sound effects and background
music in Adobe Premiere Pro. So, guys, I will be happy
to have you in this course. Thanks for joining us.
2. How To Design a Male Character : Hello, guys. Welcome to first video, first part of TD animation. First, you must illustrate
in Illustrator, then move to after effect and animating
Adobe After effect. Create a new project
in Illustrator, select your project
film and video, HD, because you need to illustrate for the
video animation. Don't forget, select
the color mode RGB, select the quality
150 pixel per inch, and select the
background transparent and then select the
unit two pixels. And next, go to File
Place zoom out and create the sketch
or the picture or the photo of character
to the project. And now I need to illustrate
the character first. Select, make embed and next, change your pasting to 70, 80% and select again. Go to layer Lock. Create a new layer, a new group layer,
and double click here right here, character. Select the group of layer, and then zoom in, start from the face. Take a look, select ellipse, create a simple ellipse here and change the
size, the skill. It's very easy to
select the warp, hold Alt key on keyboard to control the size of the cursor. Hold lk, control the size, and move up move here a
little bit down and sit here, change the size, move up. Here. So guys, next,
select the pace, sit here and select
the eyedropper, click to apply and select again. Make a little bit, change opacity and sit here. And now, time to
create the eyebrows, the eyes, select go to
object, take a look. If you need to lock, the short
cat is Control plus two. If you need to hide, the
shark is Control plus three. If you need to unlock, take a look hold Control two. If you need to unhide
control all three. Select press Control plus
two to lock next Select, pain to one click and
press Skip select, turn off the film,
turn on the stroke, change the color of the stroke, Okay, and select again, change the size of a stroke, click on stroke and change
the style of stroke. Make size and sit here. A little bit move
up, sit right there, press E. Sorry, press A for the direct
selection. Set right there. Next, select the pain to design the eyes and select the circle, hold Alt plus control
on keyboards, set the eyes right there and
turn off the stroke turn on. The fill change a little
bit darker zoom Sit here. Hold key zoom out, select, make fill color for the
eyes and change the size to 0.75 and create a simple
basic line right there. Press skip, turn off the fill and go to
select the stroke, change the size and the style. Okay, guys, nil hold
shift All shift. Kat a copy. Sit here and select this one. Right click. Go to
transform reflect. Okay, and little bit rotate, sit here. Sit here. So, guys, don't forget, select all parts of the eyes, M one group, right
click, make a group, and change the group name eyes because it's very
important for animation in Adobe after effects to
arrange your layers. And now time to design the nose. And close. Create the news and
other parts, hold key, make one more copy, and select again,
change the color, press eyedropper,
change the color. Double click, a little bit read. Zoom out. Create another part of the face. Change the size and
hold all one coping, make rotate, one more
coping, select and rotate. One more copy, one more copy. Rotate, one more copy, rotate. Select the pain to create
another part, one point, the second point
to make curve and press to cancel and
make another curve. Press Skip and select
this point to set here, and then select basic rectangle. Press A for direct
selection, set right there, one point, another point, and set another point here. Select both to make curve and apply the white
color and hold key, make one more copy, rotate Move it up. Zoom in, sit right there
and select this point, set here, select another point, sit here and zoom out. Okay, guys, select this
line, change style, and hold out one copy here, one copy here, one copy
right there, and zoom out. Create another
part of the phase. Take a look one click. And close so set this part of the face. Turn off the stroke, turn on the fall, and now time to create the ear, create the ear and press skip, select the eyedropper
and turn on the stroke. So create a simple stroke line, press skip, turn off
the fill and select. So, guys, now time to greet
the here, select the paint. Take a look, start
from here. One click. Clothes, a little bit control, arrange the hair, and next apply turn off the
stroke and make dark color. And don't forget apply the
stroke to make darker. Select again to make ten. The head is finish. Zoom in select, press I select all of them, change the paste and unlock, select the face,
select the nose, press I, and make little it. So what if we apply ingredient? No, it's good. Not bad. You guys, select
all the face parts and right click to make one group finish and now creating another part of
the character, the body. So select again the
character group. Let me say first character. Okay. I now start from the
cloth to t shirt. So first, create the neck create the neck and make a
little bit darker. Okay, and move back. So next, select
again, the pinto. One, click, two,
three, and four. So five Make a little bit
curve and close. Select the cloth
like a blue. Okay. Select the change the paste. Next, select again the pen. One click, another one. And clothes. Eyedropper, select the
color for this one. So go to create another part. One click. Make
little bit curve. And close. So guys, I now create
this side of hand. Select this one, press
Control plus three to hide that layer and
Zooming, take a look. One click, make curve and close. Create the hand zooming,
select the pent. One finger, second finger, third finger, fourth
finger, and close, press I and turn on the stroke, turn on the stroke and change
the stroke size to 0.5. Select the hand to move
front and zoom out. So create this lick.
Select the pint. One click. Second and make clothes, change the color
for this design, and select again, apply. Make black color
and change to 0.5. So zooming, create another part of this
one, select rectangle, create a rectangle like this, select the move up and move this one to right
here and change the color little bit brighter
Okay and create the foot. One, two, And close Press eye dropper, apply the stroke and change
the stroke size to 0.5, zooming and create the line. Change the line 0.25, called key, one, two, three, and zoom out. Create one line here, press Skip and select again, change style like this. Select the foot and go to
arrange into back, Zim out. So guys go to object, show and turn off the
sketch, select all of them. Select the hand,
change the color, change the color to little bit. Make darker and select the foot crest control G to make one group to back of the layers. And next, take one more copy
here, select this part. Let's see the sketch. Move up. Great. So select the
hand hold shift to make one copy Control
plus G to make one copy, hold Alt key, and right
click to go to transform reflect and sit here
to back of the layers. Take a look, make a little
bit rotate and sit here. Select the head, bring to front. Okay, guys, the character
is ready for animation. But you must complete your own illustrations and then arranging the
layers for animation, then export to after effects. Okay, guys, thank
you for watching. Let's go to second
character of the animation. So after that,
illustration of the room. And after that, starting
the animation parts.
3. How To Design a Female Character : Hello, guys. Welcome
to second part of character illustration
for animation. So it zoom out and turn on the skage select
and make. Zoom in. Take a look, create. Don't forget, create
a new group of layer and click Double
click right here. I the wife of this character, select that group and
select the Pinto Zooming. You can design the
face by pinto. You can design by using
labs like this and rotate, change 0.5 the stroke, and next select what was it? War two move up. Nice. Guys, change the paste, press eyedropper, apply,
set again right there, and make log press control too, and select the pen tool, draw the eyebrows, one click
and press escape to cancel. Turn off the feel, turn on the stroke,
double click, make a dark color
and select again. Change the size,
change the style, and select this type of styles. Select the move
here and move here. Select the paint to create
the eyes. And close. Take a look, change the size
of the stroke right there, and move this point
a little bit down, little bit down, control this handle and move
little weight up. Select the circle,
hold all shift, create a circle,
turn off the stroke, turn on the fill,
and change to make more darker. Click okay. Select again the paint, one click, press scape key. Turn of the feel, turn on the stroke,
change the size. And next, select
the eyes and turn on the fell to white color
and select all of them. Make one group, hold all key, right click, go to
transform reflect. Okay, and rotate, move
up a little bit, rotate. Sit here. Press A, move take a look. Everything is okay. Select the eyebrow, move the eyebrows here and
make a little bit rotate and move up and zoom out. So guys, create the news by selecting the pen
tool, one click. And close. So the news is a
little bit rate. Change the stroke size, press eye drop or apply, and select the circle, create hold Alt key, make one more copy here, and select the
news, apply stroke, double click Apply stroke
and change to 0.5, and zoom out, go to
create the mouth. One click to make curve
second and third, press Skip select again. Change to select this
type of the mouth. And next, create the here, select Pin tool, one click. Second, and click here to close. Turn off the stroke, turn on the fall and
make darker here. So select again the
pen tool, one click. So guys, unlock, select
the face, select the face. Make little bit
closer like this. Select the here, press Control three to height,
select the paint. So how to create
this type of design. One click, another and create another one. Another one. You must have a lot of
practice to create or using paint to and close
click here to close. Double click, change the color, change the color. Click Okay. Select again, turn
on the stroke. Double click. Make
darker stroke. Zoom in control this
part of the cage. So select again, make
0.5 and zoom out. So go back to object, show. And now here you can see Yeah. So guys after arranging, create the other parts like
the clothe, take a look, press Control plus three, next, select the paint and
Zoomin create the clothe, the part, close, and close. So you guys double click, change the color. Click Okay. Select again. Control the paste and
select the pentol again, create this part. Make a little bit
curve and close. Let's see, create the hand, select the pinto, one, To second, third finger and close. So double click,
change the color. Make bring to front. So what's next? Select hand, press control
plus G to make a group, and hold all to make a copy, go to transform reflect. Okay, sit this one right there. And next, Zooming, create a piece of cloth, create stroke, and next, go to object, shoal and select,
create a stroke. Create one stroke right there. Create one stroke right
there and select this one. Double click. Make a little bit darker. Not too much, a
little bit darker and select top one and
press eyedropper, le shift, M one
group, and Zim out. So guys, create the lakes, select the Pinto,
Zoom in one click. And close, change the
color for this one. Create the foot part with
the socks, double click, change the color okay and select the legs bring
to front, roll shaft, press Control PSG
to make one group and set another
copy right there, select both, send you back. Okay, guys. And now let's turn
off the sketch, select all, make 100%. Here you can see the final
result the final result of the character illustration
and the next time, how to illustrate the
room with the details. Guys, thanks for watching. Have a good time. Good luck.
4. How To Design a Room: Come to illustration
part to the animation, create a new file, select film and video size
because we need to illustrate for movie animation and
select the size to HD. And right here, what do
you want to illustrate? You want to straight the room. And next, select the background
content to transparent and change the color
mode to RGB and select the quality 150 pixel
per inch and click on Create SGAsNw before
starting your project, you must go to Window. You must go to
Window, Workspace, select this insu don't
forget you can turn on the Control from here and
select the toolbar to advance. Go to File, Import your drawing
or your animation skege. So this is samples example, select the Hold all plus Shift key on keyboard
to scale up the size. So select again image, click on Ibid and change the pasting to eat
the don't forget. You must go to object for
locking for group for height. But it's very easy to
use the shortet keys, the shortet key of
group Control plus G, the log selection, Control plus two and the height
Control plus three. If you hold we hold, then you can unlock hd. It means hold plus Contra
plus two to unlock, hold out plus Contra
plus two to unhide. And now we need to log made, press Contra plus two to log, and go to edit, go
to preferences. The most important. When
I scroll the mouse, I need to zoom my project, turn on Zoom with mouse wheel. Okay? Just scroll the wheel without hold any keys.
Start your project. Start from behind wall. The first behind layer
wall is yellow, create. Take a look, select
the eye dropper, select and move it back. Press Control plus
three to height, and create another part. Select the pinto One click here, H shift, one click right there, and make it curve and close. So press I Eyedropper
and then set again here, press Control cluster to height. So next, select the
pintob and zoom in. Take a look how to create
or draw the window. One click, another, and here is another one and click
here here and close. So guys move a little bit right side
and press eyedropper, select the color and
create the window and then select this
point by pressing A for direct selection and make curve and then change the
color for the window. Blue, click Okay, hold Alt key, right click to reflect. Okay, and sit here, hold shift, select these three objects
and press Control G to group, and then press Control
plus three to height. So what's next? Go to right there, starting from the
table of the kitchen. Select the rectangle. Start drawing from here and then hold the old key to
expand and next, select chain opacity down. Zoom in and select the line. Create one line here, two point line and
apply the stroke, double click, make dark stroke. Select this point. Zoom out And next select
again two pine line. Create vertical one line here, O line right there, change the size and
fold, make a copy. Create one line right
there and hold out, make a copy for this one. Create a rectangle,
create a rectangle here. Change the size to one point. Select ellipse and zoom in. Treat a circle right there and turn off the stroke,
turn on the field, and hold all one, hold out two. Select again one more line, create here and
select this point. Turn on stroke, make
dark color. Click Okay. Guys, select all the parts of
the table and press contro plus G to make one group and
Zoom create the details, select the Pinto and Zoom one. Before continue, take a look. Press skip. Turn off the fill. One click, make curve, another click. Another click. And close. Attach to the blank of the tab. Zoom out, and now select a line, create a basic line
right there and select the tap apply normal
gray scale color. Click Okay. Zoom in again. Select
the rectangle. Create the rectangle right
there and select both point, go to skill and
select both point. Make curve, hold Askey, create one more copy
and create the plate. Select rectangle from here, Select both points
and select the skill. Select the pen tool and zooming. Change the color, double click. Make a little bit bright
color and click Okay. Select the handle,
press eye dropper, apply in white
color, and zoom out. Select all of them
and make one group, contro plus G, and then press
Control three to height. And now create small
yellow wall right there. Press eyedropper,
apply this color and press Ct plus
three to height. Create another one. Let's sing and select the pin tool, one click, another click, another one, and
close to start point. Select, change the color to little bit blue. Okay. Select another part
a little bit darker. Click. Select both, press
Control plus G. Make one group, press Control plus
three, two height. Okay, guys, create this
part of the table. Select the Pinto one click. Second, Control Z. Okay. And close. Create a circle here. Zoom in set right there, press eye dropper to make darker and select press eye dropper and make it a little
bit brighter, little bit brighter,
and then create the handle one and close. Press eye dropper,
apply this hole shift, select outwards, press
Control G, Control three. Control Z again. Select the handle, press I, apply this Cloron handle and create bipentu a
basic simple line. Make curve and close. Skip, apply the stroke
and turn off the fill. Select the handle and zoom
in sit here and set here. Select all parts, shift select
all parts, Control plus G, control plus three, to height Create this
part of the room. Select the rectangle and create select bottom point
and go to select the scale, scale and next,
select all parts. Little bit curve next, create a zigzag style. Go to effect to let's
say Zigzag styles here. Click Okay. Zooming, change the size. So select then apply this
color and create another part. Zooming. Here is another part and
make a little bit darker. Click Okay. So what's next? Select the pen tool and create. Don't forget, save your project. Select the pencil you can
draw by using the pencil too. Select the pencil, turn off. Control Z, select the pencil
and turn on the stroke, turn off the fill,
and make green color. Okay, and create by
using the pencil. Select this part, adjust
control and zoom out. Zoom in again, select the
pencil, create the leaves. And close. Press, apply the
color and hold all, M one copy right there. Rotate, sit here, one
more copy right there. Rotate, sit here. One more copy here, rotate. One more copy right
there, and rotate. Select all parts of the leaves and press
Control G one group, and select on other parts, Control G, control
three to height. Well you guys, there we have
two another important parts, the photo and the television. First, create the television like this and press A
for direct selection. Make it curve. And next step this one right there and
control right there. Select the table, press
control to height. Make a little bit
curve for this one. Next, let's see,
change the gradient. Double click. Make a little bit brighter and
double click here. Make a little bit brighter. Select change of paste. Treat the glass
from here to here. Select the work to
make a little bit up. Okay, guys, now
select the body of television and let's see. Change the size and change. Let's see Select the
body of television. Double click. One, double click,
and this one is two. Two. And now create the
table of the television, how to create this. Take a look. First, select the pin tool. One click, another And close press I, apply the color and
create the line. Select the two pine line. One, here is another one. Make darker and create
two pine line here two and create ellipse zooming old ki, make a copy, and create another
part, select the pinto. Here is another part very
easy to create and close. Select listen to move. Same to back. Select
the rectangle and zooming Here
select discards. Hold ki one copy here. Hold I'll key one
copy right there. I think everything is finished. So just put a photo right
there, create the frame. Create the frame and press contro Cs to make
copying and go to file, place the photo and next embed, go to Crop Image. Apply and sit here. So guys take a look all shift, select the rectangle of the frame and the image
press control set. To put select boot. Let's see. This is the frame, and this is the image is
frame. Select the boot. Okay. Control en, go to object. I mean, make clapping mask. So let's see what's the problem. Change the position,
move top of the image, hold shift, rest Control
seven, and now sit. Okay, guys, and now apply
or create the floor, how to do this. Select the rectangle,
create a rectangle, and go to library,
select the pattern. Select one of these patterns
or design. Select this one. And then, let's see, go to Object, Rests, click Okay. And then Hold key, expand the size, and
create another rectangle, create hair, and then apply
another different color. Double click, make a
little bit, red red okay. So guys, go to layers, turn off the log and
turn off the image. Select all Chino paste 100. And let's see,
there is the floor, select both floor to move back and select
the wall to move back, range, send to back, and select television
frame and Zoom. And let's see
everything is great. Turn on image. So we need
more one more valve here, select and create one more wall right there and double click Change the color of that all or press eye to eye dropper to make a little bit
brighter and send to back and next select another wall to send to back. Let's see what's
wrong here. Yeah. Select the floor, send to back and select the
wall, send to back. And now our project is finish. So illustration of
the room is finished. Turn on stroke for all of them. Double click Make dark, stroke for all of them. Okay, guys, now time to arrangement of the layers for the motion or animation
in after effects, how to arrange the layers. Let's go to next video.
Thanks for watching.
5. How To Design Facial Morph: Welcome to morph drawing or facial drawing for character
to how to animate the mouth. Take a look guys. There
I have more samples. Let's select this one. There we have a lot
of morph samples. You need to change from raster
to vector. Take a look. I need two or three
more sample like talking like this and like
this and normal these two. I need these two samples. Select. The easy way
to change to vector is going to image trace and
select three color trays, one, two, three, and
four, six color traces, click on six color
trace. Let's see. Controz let's select
again and change to 16 color tras ControZG
back to select, change to three colors. Let's create draw by pinto because quality
of image is too low. So select eyedropper, fill and change to dark
color. Click Okay. And next, select again, change to 0.25 and move it down. Select the tongue. And close shape, control J. Turn off the stroke, select color of the tongue
and move it right there. Create teat one, two, three, and four and close. Double click, change
the color of the tee to white and sit here. H Control carefully and move it up. Select the mange control two to lock and
select the drawing. Control G to make a
group and control X, create another new group layer, paste here and we E. Create another one. Create a circle, move
it up and move here. So next turn on the black
stroke for this one, and select the weight
to make a little bit bigger and bigger and close
this one, close and close. So select eye dropper,
apply Double click, change the color to
this son and change the lip color to dark
and make more thinning. So the next drawing
the tongue, one click move a little bit up and select the color for the
tongue and sit here. So select paint tool,
create the teeth. Make white color,
okay. Move it up. Press A for direct selection,
adjust and adjust. Zoom out and select all
Control G, make one group, Control X, cut, create another new group layer Control V,
and double click. Ah. So guys now unlock
the raster, the late. You can test on
character right there. Take a look, Zooming,
select them out. Set this one here, hold, hold, set this one here. Not bad. Select another one. Not bad. Looking good. Okay, guys. But and now you can
see the morphs, weight groups, select and
Control ex cut sorry, Control C copy and paste here. Paste here, and then
select the first group, Control leg, create another
group layer, Control V, double click and right here and select another
one right here, E and close all of them. Sit here. Great. So guys, let's export the
file of Illustrator for after effects to animate in after effects in next
video. Take a look. I need to export the file. First, these two
morph the hands, open eyes, close mouth, head, right here, the body, left, right foot, what is it? This is image, delete this one because this is extra layer. We don't need this extra layer. Select and let the empty layer. Now go to file and
go to save a copy. Go to desk right
here, Mil ready. Click Save. Okay. Good for the female, take a look two hands, open eyes, the mouth, the head. What is this? Okay, right here, body,
left, right, legs. And now, save and go
to desto right here. Female ready. Click. Let's see, everything is okay. Click Okay. This one is safer. And now, guys, go
to After Effects. To test as the layers
are ready for animate. So guys, create a new project, create a new composition, and write in composition, test. Double click and go to desktop. Select, for example,
female ready. Turn off these options, click and port and select here to composition. Click Okay. Drag and drop to new composition and go to Double click here. There is the layers
ready for animation. How to animate. In next video, we will continue.
Thanks for watching. Have a good time.
Good luck all of you.
6. How To Arrangement Layers For Animation : Hello, guys. Welcome
to Layers arrangement of illustration for animation. Take a look guys. There
we have two projects. The first one is characters
and the next one is room. First, let's arrange layers of the character for animation
in Adobe after fats. Click on characters and wait So, guys, take a look. You need to animation the
character from the eyes, mouth, hand, and walking foot. First, select the
male character. You must have individual
group in illustrator, the character that look like
here, right here, male. And now, select the hand. There is the hand. Open
and select the hand group. Double click right here. Left hand and
select another one. Double click right here. Right hand. Select the head. So let's see where is the head. This is the first layer and
drop into groove and select, move it down right
there, and close, double click right here, head, and move to back of layer. So guys, select the
foot. Double click. This is the left foot and double click right
here, right, foot. So now select the body,
select this part, move here and move this one right there and select
the right hand, sit here and select this one. To move right there, let's see what's wrong? Select the hand, move here. So, guys, now, select
the male group. Select this one.
Control C or Control X, create another
group, paste here. Double click. Another way to easy Control, select the right hand before selecting the
right hand, Control Z, select and move Let's
select Control X, create another layer, Control
V. Double click right here. Left hand and move
the left hand here. Select another one. Control X, select the
right hand, control leg, create another
group layer, paste, right here, right
hand, and close. What's next? Select the head, control legs, cut
and paste here. So double click right, head and select the
foot control leg. Double click right, left foot. Move the head here. Control V, paste and move here. Move the hand right there, and let's say select the foot
to move back of the body, select another one to
move the back of body. There is the right foot, control legs, create
another layer, Control V, double click right here, right foot and close move the right foot here and
move to back of the body. Okay, guys. Let's
see what's wrong. Everything is okay. So, guys, if you need
to animate the eyes, what you do, select the eyes, like this. All shift. Let's see the eyes turn off. Yeah. Select the cut Ctrlx, create another new layer, paste, double click
right open eyes and move the eyes here. Move the eyes right there. So now, select the
mouth. Whole shift. Whole shift, select
point of mouth, and now Control X or make group. Control X, create another
group layer and paste here, paste and move sit here. Zoom out and double
click Close out. The character is ready for animation because all layers are arranged and now time to
export to after effect. Select time to control
layer of the lady, select all layer of
the lady, control, create another new project, create and paste here,
the lady layers. So select the hand Controls, create another new layer, Control V and move here. Double click right
here. Left hand. Select another one. Controlx
create another layer. Double click Paste.
So right here, right hand and paste. Set hand here. Okay. And now select the legs. Controlx Controv
and double click. Left leg So move the lag behind, select another
lake, control legs, create a new group layer,
control, and next. So double click. This is the right lake
and double click here. Right leg enter and move
to behind the body. Select the head. Select all part of
head control X, create another group layer, double pace first and double
click, write head head, and move up Okay, guys, move the hand little bit down
now time to group the eyes. Control X, create, double click. Right, open eyes and paste. Select the mouth. So Control X, create
another layer, Control V, double click. Close Mu and move here. So, guys, the
animation is ready to export for the after
effects to animate. But there is another little bit we need drawing for the mouth. We call morphing morphing mount, like, Oh, like this. So how do you do
that? In next part, we will draw the
mouth animation.
7. How To Rigg Female For Animaion: Hello, guys. Welcome to
another part of Animation. Let's import. Illustration of female character import and select composition, click Okay and drop here. So. Take a look. I need to move this female
to back of that yellow wall. How to do this? Take a look. First, create a new let's say, create a new solid right here. Musk, no matter which color you want to select because
this is musk and click Okay. And next turn off, select the Pinto and zoom in. Start from here. I need to mask from there. So if you need to
mask from here, click and click here. So one click here. Move it a little bit up
and one click right there. And close. Turn on and move the character. Female character move
here. Turn off again. So I need to move behind of
that wall how to do this. Right click, turn
on the parent link. So this is the
parent link and turn on another switch. Let's see. The mode, I need to use
Tragmt select the mask. First, select to
female ready, turn on. Move the female ready
character up and turn off, select the mask, right
click, female ready. Let's say, what's wrong? Select the female rating to mask and I need to move
behind like this. Turn on the mask invert it. Move. Here. So now, time to animate
and for walking, for hand movement,
for legs movement. Sit here. Wait over it
up. Like over it up. So double click.
I need to animate from After two second, I need to animate the
character after 2 seconds. Double click. And after two
second start the animation, the movement of legs. So guys, first, select
the lake left leg, move the anchor point here, right there, select move the
encore point right there. Select the hand right
hand encorpines set here and the left
hand, encopin set here. Next, select the head,
move the head here, the encorpines and open eyes, select the open eyes, link. So right leg, close the mode and right leg
turn on the parent link. Link to heat and
select the melt. Parent link to heat. Let's see. Good. So
let's move the heat. Top and select on other parts. Close, open eyes, move it, top. Sit here. And let's move right there. Great. Select the right leg.
And after 2 seconds, I mean after this time frame. Press R for the rotation. Let's start from the 1 second, 15 frame, start the animation
after 1 second, 15 frames. Move it back, move it forward, and go to rotation. Let's see, minus ten and
set this one into ten. StovageGT is 15, go to 21 frame, set ten minus ten, a little bit near. Let's see. Go to 28, 21, go to 28 frames, change to minus ten and
change this one into ten. Play now. Good. Now continue
the copy paste need to copy paste, copy paste. I don't need too much walking for the female character, Leno. So go back to first frame, select the hands, take a look. Select the first hand
and move to front, this to back, open, press R for the rotation, go to another frame. And go to another
frame. Move this hand. Play now, select stopwatch, ContrZ coping, and paste here, change the position. Play now. Hold on. Right click to make reverse
keyframes, lay now. Let's go to sample
animation, play now. Take a look guys. After coming that, select
the female character, move it back, and press
P for the position. Great. So now time to
animation the face. Go back to female
ready character and starting from the
winking, save an increment. Select the eyes. Right click, create
another new solid. Select the color from the face. Eyes, mask, turn off, select the Pinto and Zooming. Mask the face like this, turn on again and
select the open eyes. So I need to draw the I close, the winking, draw like this. Good, and select
Control D, set here, one more copy, and
select all of them, precompose, I, close, Enter. Next, select the eye
close Cut and cut. Make one copy, controlling,
one copy here, controlling, and controlling
controlling and controlling. So take a look now when you play now time to animate the mouth, move it up, set here, and select rotate,
set here for talking. First. Change the color like orange
and make a few frames. So after this, set
this one right here, rotate a little bit. Rotate and set here. For this one, we need mask. Go to create go to create
mask for this one, and move it here
and select both, precompose and write this. Double click turn
off the stroke for this and change the color to
orange and cut like this. Cut like this. And next, when you play, double click. Let's see. Go back to SML. Okay, let's go to make a story. Take a look. The man is coming. Hey, what's up?
Hey, what's up? Hi. Go to Ma closer. Take a look. Hi. Make closer. Hey, what's up? So go to female and
select both from here. Go back to female. Blagin. Mall, let's say, sit here and set here. Go back. Go back to
female, set here. Go back to female, make
more closer and closer. Set there, one more copy. Set here. Take a look. Need more copy, control deduplicate,
and duplicate. Take a look. Good. Now let's move the hand off for the female
character, zoom out, select this hand and press
R Press RF stopwatch, make little bit movement. Make this and play now. So move the hand a
little bit down. And move the head press
R W for the rotate. Take a look, press
R for the rotation, stopwatch, move a little bit. So don't forget, select
open eyes, close, everything Link and select
all of them and link to head Go to for ML, select the head. So move the head. Matt it down. Okay, guys, let's go to render the project,
go to composition. First increment then
save, go to composition, add to render Q before adding
to render Q. Take a look. This is a little bit problem, select all of them, make precompose, final
comp and press Enter, press S, scale up the size. So I need to animate from here. Let's see. Animate from here, move the camera,
press B the position. Move a little bit like this. Move here. Go to composition at the Render Queue and
select the format 2h264 and go to select Desktop. Then click Save and
render your project. Save and render. Okay, guys, thank
you for watching. Let's go for Editing
in Adobe Premiere Fro.
8. How To Rigg Male For Animaion: Animation part in
Adobe after effects. So create a new composition. Click here and right here, sample animation and
select the quality of your project HD and select the
time duration, 10 seconds. Click Okay. Go to Window, select default or effects
workspace and double click. First, import the room. Double click Okay. Drag and drop to your
composition project right there. Hold on, make a little bit, scale up the size and
click here to log. Before logging, I need to
make camera motion like this. Take a look. When the male character
is coming and the camera motion
is moving like this and there is the female
character coming from here. Make a little bit more
scale down the size. So from here, the male character
is walking coming here, and the female is coming
from behind of this wall. So how to masking,
how to do this. In this video, you will see. Select the room
and click on Look. So let's see where is the
Log right click labels. Here is Log turn off the keys. So lock the layer
and double click. Go to import the male character, select composition, clo
and drag and drop here. So the male character is coming like this and the female is coming
from over there, and they both talking
with each other. So select the male character and double click Zooming first, make motion for the
walking from zero. Take a look, select
the right foot and select the
encopine move here, and select the left foot, move the encopine right there, and select the left hand, move the encopine
from bottom to up, right hand, move the
encopine right there. So select the it move the
encopin for the hit here. So take a look.
Here is the head. You can move it and now
select the open eyes. Parent link, right click, turn on the parent link. Parent link to hit,
move the head now. So move the open mouth. Let's see, the closed mouth, parent link to hit.
And now let's see. Great. First, I need to move the feet, select the left and press
there before the rotate. Take a look. This one
is move back in front. Select the left one and
press for the rotation -15 and select this
one rotation, 15. Move little weight up. Move little weight up
and select the left one. Stopwatch, go to 15 frames. There is 15 frames. Go to seven frame and move to
15 and stop watch this one, go to seven frame
and set to -15. Take a look. Not bad. Select and move Make 20 and make -20 and set -20 and set 20. Lay now. Good. So select both keyframes, copy, go to paste here, play now. Select copy and paste
here. Play now. Dread. So it's stopping right
there and go to 1 second. Copy Paste, copy
paste. Play again. Great. Go to your
final composition and select the male rating, set here, press P
for the position, go to second one
and move it there. Take a look. Delete the keys to stand normal. Set here, press W to
stand normal and normal. Go back to sample
animation, play now. Move the key frames right
there and play again. Right click Make Ess. Take a look. Great play now. So I now time to move
the hands, select. Don't forget save your
project every 10 minutes, save your project. Take a look. Move this one front
and this one to back. Select the hand to move
it back and move here. So press for the rotation
of the hand, stopwatch. So where is another.
Left hand, stopwatch. Go to seven, frame, take a look right here, 20 and right here, -20. Set one and set here. -20 and set this 120. Select, copy and
go to 15 frames. Paste, copy, paste. Select again, copy, 21 frame. There is 21 28, paste, paste. Let's see. Lay now. Nice one, select
these keyframes to make smooth motion
to stand play out. And now turn to moving the hit, select Take a look. Press for the rotation. Move the head up,
little weight down. Up. Select, copy, copy, and paste here. Sit here, play now. Great. Okay, guys, and now time to talking and start from
the eyes blinking. Zooming, select the eyes, create a mask, create
a shape like this. Close and turn off the stroke, select the feel and select the color from the face
and move the points here. Select right here, yes, close eyes, press
T, chin to paste. Select the Bento. Make. Like a blink. Turn off the film,
turn on the stroke and select the stroke color a little bit dark and change the size. One, ok, one more
copy control D, and move this one to here and
select whole shift, select, and right click,
make recompose right here, close eyes, enter, and take a look select and fan link to hit. And I need to blink, hold, Back and move by
page down, one, two, three, hold, bracket, Control
D, take a look, play. Control D, one blink, two blink, another,
another, another, another. There's a lot of blink. We need to add here
for eye animation. Oh, don't turn off the eyebrows, Control Z, Control Z, control Z, control
Z, and Control Z. Yeah. Silly the eye closed
mask. Double click. Select all,
precompose, and write. I close, enter,
and parent to hit, and then cut like this. For three or four
frames, Control D. Sit here. Play now. Nice one. So play here. Good. Okay, guys, how to
make facial motion, how to animate the mouth. Select the first facial, and there is another one. Zooming after 1 second
or after 2 seconds. Select, move the
mouth, double click, rotate, rotate, sit here
and select another one. Select another one, move
right there, and rotate. Make little bit
bigger and sit here. So how to animate, select the boat layer and
change the color different. Turn off the boat
and select the musk. Make mouth musk here. Close, turn off the stroke, turn on the fill and
right click right here. Mouth, mask, close. So Silicn move it down. Turn on this. And one more copy. Sit here. Okay. Select both. Right click, precompose. Change the color to
green and select both before selecting both. Right click, recompose. Okay. And now take a look. Move, set here. Hold shift and
link to heat here. And next, don't forget
save your project. After 2 seconds, he is talking. Hold bracket, hold Alt key, bracket and break from here
too and break from here too. If you make a space,
select the bot, control de duplicate, set here. Take a look. Hey, learn
the after effect. Learn the after effect. Make more duplicate Controlling. Set here. Controlling.
One more copy. Set right there. Great. So, guys, and now let's play. A little bit problem
right there. Double click. Take a look. There is a little bit problem. So not a little bit. This is the big problem. Zooming. Select the pinto, create another curve
line and go to fell turn off and go to turn off and
select the color from here. Okay. And Zooming
sit right there. Let's see, and rightly rename. Muthline. Parent link to it. Parent link to head. Let's see. Lay now. Good. And now time to make
motion for the female. Okay. For the female motion in next video,
thanks for watching.
9. How To Record Voice For Animaiton: Hello, guys. Welcome to
editing part of to animation. So, guys, this is Adobe
Premiere Pro 2026, and now we are going
to edit animation, how to create sound effects, and how to dubbing and
how to voice recording. So everything in animation
editing, you can see. First, I need to start from the background sound
effects like footsteps. Let's search foot step. Background and sound
effects right here. Foot steps. Football, food. Let's write walking. Is there any sound effect about the walking? Walking step. Let's play with MPC. Let's write steps. Let's search here. A sound effects about steps. Let's check here. This sound effet is not bad. Let's use the sound
effet drop to desktop. And then I want to put this
to course source file. So there is the
carpet and drop here. Play. Right click, change
the speed duration in 1 second, play now. Okay. So after this, another sound
effect we need for the lady. Old Old K adhe the
sound effects a little bit low because she is too far from the camera and play now. Cut, play again. Cut, play now. Okay. Let's record this
vocal recording here, turn off the sound effect
track and go to Windows, turn off the sound system, and then connect your
microphone to computer. Then find here the mic
click here to record. So I have script. I need to record
this take a look. Hello, honey, honey. Hi, D. Hi, D. How is our Animation? Not not but Stop. So let's play. Turn on the sound system
Windows You know, Hello, honey. You know, double click. So select and cut We
have two types of vocal. The first one is for the male, the second one is for the female and select the sound effect, put it down, and
select the razor. Take a look. Dear. Cut, cut. And now, take a look. Select all sound effects. Select all vocals. Hello.
Starting from here. Take a look. Hello. Hello, honey. Cut again and zoom in, move a little bit. Lay now. Hello, honey. Hello. Honey. Good. And now take a
look for the lady. Slick put here and double click. Zooming there Hi. Hi, dear. Good. Now time for the meal. Let's play. Cut and sink. How is our animation? So cut again, see, cut, and move it down. This track is for the lady, and this track is for the mill. No. No Not too bad. Okay, guys, and now time to
changing the vocal pitch. Select for the mill and go
to initial sound first. Turn on. Go to effect. Click here, right.
Pitch, Schiffer. Select, drop, and go
to effect Control, select the first one
and go to pitch editor. Take a look. When I need
to change to minus, what happened? Take a look. Hello, honey. Hello,
honey. Come on, honey. Yeah, this one is good because the gentleman is
a little bit fat. Next, let's see. Yeah. Close, select
another one minus five. Good, and select
the lady's vocal, go to effect, applying
and go to the first one. C here, make five and play. Hi, D. Nice. Select another one. Make five and close. Let's see. Lay now? Hello, honey. Hi, D. How is
our animation? Not too bad. So now I need to record a little bit more vocal
for the gentlemen. Let's turn of the
Windows sound system and go to gentleman Track, start here, to record. Ya. Mm hmm. So go back to sound
system and select again. Go to effect, apply, go to effect Control. So go to edit, make
it minus five, close, and go back to
sound system windows, turn on, play now. Mm. Mm. Right, make a little
bit slow motion. Good. Okay, what about
background music? Let's select apply
some background music. Here I have a lot of
background music. Take a look at the first I. So this one is better,
internal float. Select double click. Close the expand and select. Let's add more tracks, right click, add Track. Just I need one
more track here and then select the
background music, drop here, and move
this one little bit up. Double click, expand the
background music. Let's sing. I need to end from the beats. I need to end from here. Press p for the paint
tool, one click, another. I need a little bit. Oh, honey. Hi there. Who is our animation. Not too bad. Mm. Press cut the background music
here and delete the extra. Select the title. Click here. Thanks for watching. Move it to center of the
screen and play now. Let's see. Cut old old one more copy. Right here, I will be happy
to have you in this course. Select all go to
Go to properties. Let's find where there
is the properties. Move here and set to center, select and move here. H. Play now. Select the end title
at Dissolve and play. Again, turn off frame margin, close, close close all panels. Let's see the final
result of this course. Let's background music and
other different color. Let's play from the
beginning. Play. Oh, honey. Hi, D. How
is our animation. Not too bad. Mm. Select this vocal,
make a little bit up. Hmm. Make five. Mm. Play now. Oh, honey. Hi. Who
is our animation. Not too bad. Mm. So, guys, let's export our
project in high quality. Go to export, click here, and then take a look
where you want to export. I want to export this folder to the animation
course and right here. Final animation. Video. Final animation video. Video. Click Save. So select the format, h264 and go to video setting. This is another important
setting we have. I need to render this video from my GPU, select
hardware encoding. So I need to export the
video in high quality, set total bit rate 15 MVPs. So in next everything is okay. And then colectEport. So the video is exported and ready for sharing, for watching. Thanks. Good luck, all of you.
Khalil Sediqi, Yes I'm a Digital Arts Instructor
