Transcripts
1. Introduction: Hello everyone, I'm unique. And into this class we'll draw a few cute drinks and
sweets illustrate chats. These class doesn't require any prior experience
or fancy tools. We'll start from scratch
and we'll be using simple techniques
throughout the process. Everything you'll see will
be happening in Procreate. However, if you have other software or once tried
traditional materials, you are welcome to join if
you are ready to start, Let's jump right into it.
2. Preparing the Canvas & Making Soda Can Sketch: Let's start this
class by deciding what kind of Canvas we
are gonna be using. You can see it is a very
simple square canvas because pixel width and pixel
height are 2048 pixels. If you would like to use
any other dimensions for a Canvas, just go for it. S for DPI, we are using 300
and S for the color profile. We are at SRGB with
this low number. When it's all done,
let's hit Done and it will be redirected
to our new canvas. And now we need to decide
what kind of colors we are going to be using
throughout the whole class. It can go to the Project
and Resources tab. You can download
the color palette and you can follow along. While you are still here
under the Resources, download the brush
that we are going to be using just in a few minutes. Now when you have
downloaded everything, Let's go to our color palettes and let's check out
what we have here. Here we have two options of
how we can use the colors, the compact view and the cards will be using cars because
they have all the colors, names and they are ready
for you to be just for now, while I still here under
our color palettes, Let's select the first color
and it will be sky blue. Let's tap on this to select when we have our first color ledgers, grab this brush that we have downloaded from our resources, and we will go across
the whole shape of our Canvas and we
will add the grid. So we will need to do it without an holding our Apple Pencil. So just go in there and with one stroke creating these grids. When you did it, let just
go and change our brush. So we arguing against
our brush library, I go into this kitchen folder and we will select
procreate pencil. With this brush we are going
to be creating our sketch. So if you want to use any other brush for
this kitchen part, you are welcome to do it. Now when we have our brush, we will firstly go back to our
color palettes and we will select the color with
the name lines one way, this color, we will
create our sketch. So again, let's just tap
on it and let's select it. When we did it, we will
need to go to our layers. And firstly, we will rename this layer with
our great dirname, the layer we will need to tap on it and we will need
to choose Rename. Let's go with grids. Now when we have this
layer with a grid, we will need to
create one more layer above and onto this layer, we will be creating our sketch. Let's just tap on
this plus icon. We will have a new layer and
we will rename it as sketch. One more time tapping on the
layer and choose rename. And now we will get
back to our brush. We will go to our Canvas and we will start creating our
first illustration. And our first
illustration will be as soda can ledgers grab our brush. Let's zoom in our Canvas to some part that we
have on its own. And when you have it, we will just go and
we will start by creating the top
part of the can. Very easily. We are starting by
creating a concave curves. Let's just go and create
something like that. You can play around
with the size, you can play around
with the curvature. It's all up to you and
the end of the line, hold your Apple pencil
and you will see that you snap your
career to a better one. If we need to adjust
it even more, we will hold our
Apple Pencil and we will go over the
top to edit shape. When we are in this
mode, Edit mode, we can see that we have
some nodes and that means that we can tweak them
and we can adjust this line. So e.g. allege us go to
this node that we have in the middle and we will make the whole curve a little
bit less curvature. So we will move these
nodes are a little bit up if you need
to move it more to the right or
more to the left to make this line equal
on both sides. Just go and do that when you have the
result that you like. Let's just tap on the
screen with one of our fingers or with
our Apple Pencil. And in that way, we will
go away from this mode. And now when we have
the first curve, let us continue by going to this side and we will
create two vertical lines, one on each side. So firstly, let us go over
our left side and we will create the land that
big, same as before. We can hold our line
and the ends and we can adjust the Inca
ledgers and hold it. And when we have
this first line, we will move on to
the opposite side and we will do the
same thing here. When we have these
two vertical lines, we will need to connect
them by going to the top and creating
a convex curve. This time, Let's just
go or our left part. And we will start by creating
the curve like that. We will connect it with a line
that we have on the right. And if we need to
adjust it even more, we will and hold our
Apple Pencil and we will go over the
top to edit shape. We can play around with
this little nodes. If we need to adjust
their placement, we will go to them, we will hold them and we will move them. And if you are satisfied
with everything here, we can just tap
on the screen and continue adjusting our shape. Now, we will need to go
inside of this shape and we will need to create the
inner part of this two-part. Let us go firstly
or our left side, and we will put a
little mark down. So we will stop a
little bit from the bottom and from
the left side. And we will put a little dot here when you have it
over the left side, less than one over the right. And we will do the
same thing here, just putting a little mark down. And now we will just need to go inside of the sheep
and we will need to connect these two
dots by creating the inner part with sharp edges. So firstly, let's just
go over the bottom part and we will repeat this line
that we have right here. And by making this line, we will connect these two dots. Try to make this line parallel to the one that you
have on the bottom. If you need to adjust it, go up to Edit Shape and
play with the notes. When you are satisfied
with everything here, tap on the screen
and let us go audit so part and we will repeat the line that we
have on the top, connect the dots if you need your over-the-top
to Edit Shape and adjusted mean this
line parallel to the one that you have
on the top ends. When you are done
with this slide, let's just go inside
of this little shape and we will go and create
a ring of the cat. So we will go to
the middle part and we will start by
creating an ellipse. So the same way as we
did with the curve, we are just going
inside and creating the shape without an
holding our Apple Pencil. So we are making a just with one line and the end underline, you can hold your Apple
pencil and you will see that you snapped your
line to a better one. If you want to adjust the size, you will just move your Apple
pencil from side to side. When you have found this
size that you like, you can unfold your Apple pencil if you need to
adjust it even more, go over the top to Edit Shape. You can play around
with the size, with the nodes, with
everything here. And when you are
satisfied with it, we will go inside of
this shape and we will add a little
elements inside of it. So firstly, let us go
over our left part. We will make a little
line like that. When you have it, we
will need to repeat this line that we have
over the top part. So just go in there and repeating the shape
of the ellipse. If you want, you can hold your Apple pencil and
the hands and you can adjust these little shapes by going over the top
to edit shape. When we have this first shape, we will need to go
over the bottom on this part and we will need
to do the same thing here, but this time we will mirror it. So again, we are starting by creating a little
line like that. You can hold it at the
end when you have it, we are going to
the bottom and we are repeating the
shape of the ellipse. Hold it at the end, go over the top to edit
shape if you need to. And now when we have
something like that, we are ready to go
to the bottom and we are ready to add this
body of our cat. So let's just first to
go over our left side. So these intersection and
from it we will create a curve going down that will represent the side
of our account. We can play around
with the size, we can play around
with the curvature. It's all up to you. Let's just go there
and create a curve. Hold it at the end, adjust the curvature,
adjust the angle. It's all up to you as always. And we can go over
the top to edit shape to play with
this little notes. So find what works for you. And when you are done, LED just tap on the screen. When we have this curve
over our left side, let's move on to
the opposite side. And let's try to do
the same thing here. Let's just go and mirror these curves that we have
over our left sides. Tried to make it similar to
the one that you have or your left sides
hold your line and the ends if you need to
adjust it even more, go over the top to Edit Shape, play with the nodes,
position it correctly. And when you're done, tap on the screen. And now when we have these
two curves on the sides, we are ready to go to the bottom and we are ready to
close this shape. So to close this shape, we will need to go to this site and we will need to
create another curve. And this curve should be parallel to the one that
we have right here. So let's just go to the bottom part and we will
connect these two curves on the sides with the
curve which is parallel to the one that
we have on the top. As always, you can hold your land and the ends
and if you need to adjust it even more legislative
orbital up to Edit Shape. And here we can play with the curvature when
you earn down leg, just tap on the screen and it's now we will need to go under this line and we
will need to create the same line as we
have on the top. Let's just stop. Alice will be done
and we will repeat this same line as always. Hold it at the ends, play with the curvature
adjusted if you need to, by going over the top to
aided sheep threatening this line similar to the one that you have a
little bit above. And when you add down, let just tap on the screen and
let's just go to the sides and we will create the lines there to connect
these two shapes. So again, we just go into
this intersection and creating a straight line when
you haven't done one side. Let's move on to
the opposite side and let's add the
same line here. And when you have
this shape layer, just go grab our eraser tool and we will erase everything
that we don't need. And when we've cleaned
up our shape layer, just go to all of the
street corners that we have across our illustration. We will turn them
into the soft ones. Incentive, they're
very straight corners. We will create the
curves because we want our picture
to be eschewed as possible and our rounded
corners will help us with it. So let's just go to all the street corners and we will create the curves
instead of that. And when you are done softening the corners like
jazz one more time, grab our eraser tool and we will erase everything
that we don't meet. Now we have a nice base and that means that
we can go inside of this shape to the
body of our Kan and we can create
some beautification. So e.g. let's just
go and draw a sun. We will start by going
into the middle part. If you want, you can shift it a little bit to the
left or to the right. It's all up to you. All we need to do is to
create a shape of the circle. So the same way as before. Just go in there with one
line and creating the sheep. At the end of the
line, we are holding our Apple pencil to snap
it to a better shape. But this is an ellipse and we will need to create a
perfectly round circle. Without an holding
our Apple pencil, we will hold one
of our fingers on the screen and we will snap it to a perfectly
round circle. So now adjust the size by
moving your Apple Pencil. Find what works for you and
when you are satisfied, ledgers go over the
top to edit shape. We will position our sun
a little bit differently. So e.g. allege us go and
put it somewhere here. When you are done
ledger start on the screen and ledgers
go and add their race. We will go along
the whole shape of our Sun and we will add
little elements like that. So basically there are
triangles and we will just go and add a few of
them going along the shape. You can play with this
size and you can play with the placement to make
it easier for you. You can start by creating
the lines like that, going alone the whole shape. And when you have the lines, let just turn them
into triangles. And when you're done, let us do inside of the shape of our Sun and we will add
the facial features. And we will start by finding an approximate
center of our sheep. To do so, firstly, we will need to go and
create a vertical line, and then we will create
a horizontal line. Let's just go and
create a vertical line. Firstly, just going across the whole shape of our
sun, adjusting the angle. When we are done, we can go over the top to edit shape if you need
to move it, e.g. when you are done with
the vertical line, Let's just go and create a horizontal one the same way as we did with the vertical one, a jazz the angle. If you need to
adjust it even more, if you need to move it go
or it's up to Edit Sheet. When you're satisfied with
these little elements, we will do a little bit above airline that we have on
the horizontal axis. And we will start by creating
two doors for our eyes. So let's just go somewhere here and we will put the first dot. You can play with the size. You can play with the
distance from the center. It's all up to you when you
are done with the first, i let us move on to the
opposite side and we will try to put the
second ion here. So let's just go and put
these dots on the right side. We will need to keep the same distance from
the center and we will need to put it on the same line and we will need
to keep the size. When you aren't done. Lectures go right
between the eyes and we will add
little Smiley mouth. Just go in there and
creating a curve like that. You can play around
with the curvature. You can play around
with the size. You can hold your line and the ends if you need to
adjust it even more, ledgers get awkward
itself to Edit Shape and we will
adjust it from here. You can see that we
have a few options over the top,
ellipse and circle. You can play with them too. And when you're satisfied with the whole shape right here, Let's just tap on the screen
to get away from this mode. Now when we have
our Smiley face, Let's just go underneath the ice and we will add
little cheeks here. So basically we are
just going under the eye and we are
adding a circle there. So again, let's just go
and create the shape. Firstly, let's hold
it at the ends and let's hold one of our
fingers on the screen, snap to a perfectly
around circle. A jazz decides, adjust the placement by going over
the top to Edit Shape. And when you have
the first shape, let's just go over
the right side and we will add the same cheek. They're starting
from this circle, holding it at the end, hold in one of our
fingers on the screen. Let's adjust this size. And if we need to
adjust it even more, we are going over the
top to Edit Shape and let's position it
correctly on our canvas. Let's play around and make it the same size as we
have on the left to make sure that
our second cheek has the same size
that our first one. We can move it to the first one, adjust the size here, and then from it, we will just move it
to the opposite sides. Let's position it
rightly onto our canvas. And when we are done,
Let's just tap on the screen and we can
continue adding our details. So when we have this sand layer, just go and add a few clouds. We will go across our shape and we will be adding
the elements like that. So firstly, let us go or our bottom parts and we will
create a line like that. As always, hold your line and
the end, adjust the angle. You can play with the size. It's all up to you. When you have this slide, we will go over the
top and we will create a few loops here,
something like that. You can make as many
loops as you like. You can play around with their size and with the
curvature, with everything. When you have the first shape, Let's just go and
add a few more. And again, start from
making a line and then create some loops
or that sub-parts. And when you are done, Let's add our final elements. Firstly, we will go to this
place that we have already, it's soap and we will
create a little free, just very easily go in there and creates in
something like that. When you hand this
little frame ledgers go inside of it and let's
write down, yummy. And when you are done, we are done with
our first sketch. And to finish it out, Let's just go and make
this elements smaller. And also we will position
it onto our canvas. So firstly, what we need to do, we will need to go to
this arrow key on it, so plots and we will tap on it. On the bottom, we are
using uniform methods. And you can see that we
have this bounding box. So we will need to go to
one of the corners. So e.g. to the top right, and we will move it
diagonally down. Find the size that you like. And let's just move
this whole shape over our left sex when you're
satisfied with everything here, let just tap on our arrow key. If you want to
adjust it even more, we can go over this Warp
option over the bottom panel. And you can see that here we still have this bounding box, but also we have some
intersections inside. That means that we can go
to any place inside of this bounding box and we
can adjust our elements. So e.g. you can
grab something and you can just move it and
adjusted in that way. If you need to adjust
your shape in that way, Let's just play around. And when you're satisfied
with everything here, we will meet up in
the next chapter where we are going to be
creating our second sketch.
3. Candy Sketch: Let's start making IS
second sketch by moving to our top right corner and we
will zoom our Canvas to it. Here. We will start very
easily by creating a rectangle the
same way as before. Just go into our canvas and with one line without an
holding our Apple pencil, we are creating the sheep. Hold your line and the ends. And when you are ready ledgers do or that
soap to edit shape. Here you can see
that we have some options on the top and e.g. alleged as guilt and
select the rectangle, it will snap are shaped
to a better one. And if you need to adjust
your lines even more so e.g. your lines aren't parallel
to one another or they are not that straight as you have the
lines on your grid, you can go and play
around with the nodes. So when you are done, adjusted your shape
alleged just tap on this green and we will go
away from this mode. Now when we have these base, we will go to the corners
and we will adjust that. So instead of the
very straight lines, we will create the curves the same way as we did with our cat. So firstly, let's
just go over one of the corners and we will
create a curve here. Hold July and DNS adjusted if you need to by going over
the top to AD cheap. And when you have
the first curve, instead of the corner, ledgers go across all of them. We will turn them into curves. And when you are
ready with this task, let's just grab our
eraser tool and we will erase all of these corners
that we don't meet. And now when we have this rounded rectangle
that will be our base, we will go to the sides and we will create some rubber here. So firstly, let us get back to our brush and we will go
firstly to the left side. We will step a little bit aside from this
little corner that we have the various software and we will create
a line like that. As always, you can hold your
line and the hands and you can adjust the angle by
moving your Apple pencil. Let just make it parallel to the lines that we
have on the grids. When you have the
line on the top, Let's just move on
to the bottom and we will create the
same line there. When you are done
with this task, we will go inside of this little shade that we
are just creating right now, and we will add a
few more lines. So later on, we will
connect them with a curse and we will create a wavy
line for the wrapper. So let's just go and add
a few more lines in set. You can play around
with their size. You can play around with the
distance from one another. It's all up to you. And when you are done, Lynch's go more to
the left and we will connect this little
parts with wavy line. So firstly, let us
go over the top and we will create the
first curve like that. When you have it, we will go to the next area and we will
go inside of this shape. So we will do
something like that. When you know, the pattern
ledgers go down and let's create a few more lines to connect all of these
little shapes. And when you are in Dan legislative on to
the opposite side, and let's do the
same thing here. So again, we are starting with the lines that will be
strictly horizontal. Try to put these lines on the same places that we
have them on the left. So when you have two lines, one on the top and
one on the bottom, Let's go inside and let's
add a few more lax. And when you are done, Let's just go and
end this wavy line. When we are done with our base, ledgers go inside of the body on this candy and let's add
some beautification. So e.g. allege I started by creating a little
rainbow here. We will stop a little
bit from this side. So e.g. let's start
from the left side and we will go and create
half of the circle. So go in there and very boldly creating the
sheep like that, hold your line and
the ants try to make the distance from the
sides equal on both sides. And we will hold
our Apple Pencil and we will go over
the top to edit shape. We will play around with our notes and we will
try to make this shape equal on both sides when your eyes and just
tap on the screen. And now we will need to go under this line and
we will need to repeat it because we want to
close the shape later on. So let's just go
step a little bit aside and we will create
the same line a little bit. Insects play with the size, bleed with the curvature. If you want, you can try to hold one of your
fingers on the screen. It might snap to a better shape, but also it might note
so we can go over it. It's up to Edit Shape
and adjusted manually. Try to make these two lines
similar to one another. They should be parallel. When you're satisfied, we will tap on the screen and we will continue by going under these bottom parts
of our rainbow, and we will add
some clouds here. So firstly, let's go
over our left side. We will go a little bit
underneath the shape and we will start by
creating a line like that. Play with the angle, try to make it straight. When you have this line, we will do the same thing
as we did on to our Can. We will add this little loops. So let's just go and add them. You can play with the size
and you can play with the amount of that when
you haven't done one side, Let's move on to
the opposite one and let's do the
same thing here, starting from the line that
is going horizontally. When you have it,
We are going on its own and we are
creating some loops. And now we will just grab our eraser tool and we will erase all the lines
that we don't meet when we have our rainbow ledgers go and add
the facial features to it. If you want. You can start by creating
a line going from top to the bottom to find
the approximate center. Also you can create another line that will go in a
horizontal axis. And in that way,
you will know where you need to put their
facial features. So let's just go with
this one vertical line. That way we know where is the center and we
will go to the site. So e.g. to the left one. And we will start by
creating a dot for the ledgers go and
create these dots. As always, you can just go and
play around with the size, with the distance from
the center and with a line where you want to
put in this little I own. So when you have the
first I let go to the opposite side and let's
do the same thing here. We will need to put
it on the same line. We will need to keep
the distance from the center and we will need
to make it the same size. Let's just go and
try to do that. Now when you have the ice
ledgers go right between them and we will add the
little Smiley mouth again, as well as we did with
our little count. Here, with our little sun, we will go and create a
little curve like that. You can play around
with the size, you can play around
with the position you can hold your
line and the ants. And if you need to
adjust it even more, go over the top to edit shape. When you're done playing
with your sheep led just tap on the screen to
get away from this mode. And we will go underneath the ice and we will
add little cheeks. So firstly, let's just go
under our left eye and we will create a little circle there
the same way as always, just go in underneath our AI and creating the shape just with
one line at the end of it, we are holding our Apple
Pencil and we also will hold one of our fingers on the screen to snap it to a perfect shape. If you need to adjust
the placement even more legislative
over-the-top to Edit Shape. And we will find what works for us when you are done
with the first cheek. Let's move on to
the opposite side and lead to the same thing here. Ledgers go and create
the shape of the circle. Firstly, hold it at the end, hold one of your
fingers on the screen. Let's go over the
top to Edit Shape, and let's check out whether
the size of this ellipse similar to the one that we
have over our left side. So we will just move
it to this shape. And if it's similar, we will just move it
back under our eye. Let's position it correctly. And when you are done, like just tap on the screen
to get away from these modes. Now when we are done with
our facial features, let just go around our shape to all these blank spaces that we have onto our body on the candy. And we will add some stars here. Ledgers go Zoom in Canvas and start by creating
the shape like that. You can start easily by
creating these shapes. Then grab your eraser tool and erase all the lines
that you don t neat. When you have the
first star ledgers, get back to our brush and let's go and add a
few more of them. If you feel very confident, you can create the
stars in that way, you can play around
with the size, you can play around
with their position. It's all up to you. Just try not to overdo it. And when you are done editing your little stars alleges
go and add a little label. So we will go to the bottom
right corner and we will create the shape that we had
right here onto our camp. You can play around with the
shape and when you have it, ledgers grab our eraser
tool and we will erase all the lines
that we don't need. And inside this shape, Let's just go and
write down, sweet. And when you are done, we are done with
our second sketch. And in the next part, we will be creating a juice box.
4. Juice Box Sketch: Start with our
third illustration, lead zoo or a canvas
underneath they can. And we will start very
easily by creating a rectangle the same way
as we did with the candy. So let's just go and create
the shape just with one line. At the end of the line, we will hold our Apple pencil to snap it to a better shape. And also we will go over
the top to edit shape. If we have the option rectangle on the top, we will select it. If we don't, we will go
manually and adjust our sheep. We will need to have a
very straight rectangle. When you have it. We won't need to
do one more thing. This little part will be the
top part of our juice box. So we will need to
go and adjust it. We will need to tilt it
towards the right side. Let us go and do it in that way, we will go to this node
that we have already talk, and we will hold our
Apple pencil there and we will move it a
little bit to the right. We can make it a
little bit smaller. If you want. You can play with the angle. It's all up to you. When you have
something like that, Let's just move our shape a little bit more
closer to they can, so we have some
space underneath. Let's find the
position that we like. And when I download, just tap on this screen to
get away from this mode. Now when we have these base, we will do one more. I think we will go and find
the middle part of it. So let's just go to one
of the sides and ledgers. Mark down a little note here. When we have it,
ledgers go and create a straight line that will go horizontally through
the whole shape. Adjust the angle, hold your
Apple pencil at the end. If you need to place it
differently, ledgers get over it. It's up to Edit Shape and find
the position that we like. And when we have our
shape on the top, we will need to go to
the corners and we will need to start
making a cuboid. So we will need
to go and creates three parallel lines going down. Let's just go firstly
over our left side and we will create this straight line going from top to the bottom. You can play around with its
size, hold it at the end, a jazz the angle
and try to make it parallel to the lines that
you have on the grids. When you are done, ledgers go to the remaining two
corners and let's create two more lines going
from top to the bottom, make them parallel
to the one that you already have on,
say, your Canvas. And when you have these lines going from
top to the bottom, we will need to get to the bottom part and we will
need to connect these slides. And we will need to
create the lines the same way as we have
them on the top. These new lines
should be parallel to the ones on the
top layer just go firstly to this main
part and we will create a strain lines that
is going horizontally. When you have it, we will go to the right part and we will need to create it
a parallel line. There. Ledgers go to the corner
and we will try it out, hold the line and the
ants adjust the angle. Or if you want to make
sure that this line is parallel to the line that
you have bonded soap. We will go over the
top to edit shape. We will move this
line to the top. We will adjust the angle here. And in that way, we
will just go down later and we will
put this line here. And again in that way, we will be sure that these lines are parallel
to one another. When we are done,
Let's just tap on the screen and let's
work on our corners. So we will go for a slow
or are left side too, they bought them and we will
soften it here again the same way as we did onto
our candy ledgers. Go and create the curve instead of this
very street corner, call the line if you need to go over the top
to edit shape. If you need to adjust
it even more when you have the first
curve or the left side. Let's move on to the right side, to this element right here. And we will turn this
very straight corner into a curve to when
you have it ledgers, grab our eraser tool and we will erase everything
that we don't meet when we have our base layer just
work on some details. So firstly, we will go to this side that we
have on the right, and we will add a
little fold here. So we will start by going to this line that we
have in the middle, and we will continue
making it by going down. So let's create
something like that. Hold it at the end,
adjust the angle. When you have a
very straight line, we will go and create
a little triangle. So go into one of the
corners and stars and creating a very
soft triangle. You can hold your
line at the end. You can adjust your line
by going up to Edit Shape. It's all up to you. When you have this little folds, we will move on to the left side and we will
move on to the soap. We will add a little straw. Firstly, let's just
step a little bit down from this line that
we have in the center. And we will go to the top and we will create two
parallel lines, as always, whole July and the ends to snap it
to a better line, a jazz the NGO. When you are done,
Let's just move on and create another line
on the right set. You can vary the
size on the straw. It's all up to you. We will need to create
two parallel lines. When we have these two lines, we will go to the bottom and we will connect them with a curve. As always, you can play
around with the curvature, you can play around
with the shape. It's all up to you. Now when we have the shape, we will go over the
left side and we will add the bottom
part of this true. So firstly, let just go there and we will create
two lines like that. Try to keep the distance
between these two lines similar to two lines that you
have over your right set. When we have these two lines, we will need to
connect them with a previous two with the curve. So firstly, let's just go over the top part and we will connect them with
a curve like that. Hold your line and the
end, adjust the curvature. It's all up to you as always. And when we have this curve, we will need to connect these
lines or the bottom part. So let's just go there and
create a little curve there. When you have it, we
will need to go to this little band and we will
need to add a few lines. So let's just go and add a
few straight lines like that. He didn't play around
with their amounts. You can play around with
the distance between them. It's all up to you. As always, when we have
this little bands, we will need to go and finish up our straw or the left side. So we will go there
and we will add a little circle or a
little ellipse here. As always, you can play
around with the size, you can play around
with the curvature, whole July and the ends. And if you need to go or that up to Edit Shape and
adjust it, e.g. let's make it less open. And when you have watching it, Let's just tap on the screen
to get away from this mode. And we will grab our eraser
tool and we will erase all the lines that we don't
need when we have our straw, we are done with the
whole base in general. So now we can move on and
we can add some details. So firstly, let us go over our right side and we will
add a little label here. So let's grab our brush. We will go inside the
shape and we will start by creating a rectangle
the same way as before. I just go in there and create
and ingest with one line. At the end of the line, we
will hold our Apple pencil. We will snap it to
a better shape and we will go over the
top to edit shape. If we have the option rectangle
here, we will select it. If not, nothing special, we can go and manually
adjust our shape. What we need to do is to make all the lines that we have onto this little shape parallel to the lines that we
have on the books. So the top and the
bottom lines should be parallel to the top
and the bottom line. And two lines on the sides
shouldn't be similar to the lines that we have
on the sides of the box. So let's just go and adjust
the angles of our legs. If you want to make sure that the lines that you
are creating onto this little label are similar to the ones that you have already
opened over the bottom, you can just move your
shape and adjust the angle here firstly or the
top or the bottom. And when you are done, we will move this
shape to the center. And also you can play around
with the size of this thing. When you are done,
Let's just tap on the screen and let's continue
adding some details. So firstly, ledgers go inside of this
little shape that we just created and we will
add a few lines like that. So again, we are going inside of the shape and we are creating
the parallel lights. When you have them, we will do to the bottom part of this little shape and we will create another rectangle here. The same way as before. Just go in there and creating the shape of the rectangle
just with one line. Hold it at the end. Let's go over the
top to edit shape. If we have the option
with a rectangle, we can select it. If we don't, don't worry, we will go and manually
adjust the shape. One more time. We
will go and we will try to make all the lines
parallel to the ones that we already have on to our screen when we have this
little rectangle and when all the lines are parallel
to the lines that we already have onto this
little bounding box. We will tap on the screen
to get away from this mode. And we will go inside of
this little rectangle and we will add a few
more vertical lines. When we have separated
our little parts here, we will grab the eraser
tool will go inside of this little shapes
and we will turn them into singular rectangles. If you need to
adjust some places, just grab the brush
and adjust that. When we have these, we are ready to move
on to our main shape. And we will go and
start by creating a little bear on the
bottom of this shape. So firstly, let us go
and create a circle. Same way as always, we, I just go in there and
create an arch shape with just one line at
the end of the line. Hold your Apple pencil. If you want, hold one
of your fingers on the screen to snap it to a
perfect shape of this circle. Just decides to your liking. If you need go over
the top to edit shape and position it to
your liking to e.g. just with a little bit
more to the bottom. And when you have
the shape like that, we will go and adjusted
just a little bit. But before doing it, we will need to select
it and to select one shape on the whole canvas, we will need to go to
this S ribbon icon. Let's tap on it and
you can see that on the bottom we
have a little panel. We will need to select
freehand methods. With a freehand method, we will just go around the
ship and we will select it. We will need to loop this shape. And when you see that
only the area that you want to be
selected is selected, we will need to go to
the transform tool, which is our arrow
key on the top-left. So I just tap on it and
we will go to the warp. You can see that before we had the bounding box and when we are using uniform method e.g. we can go and scale
this thing down or up. We can move it,
we can rotate it. But we also want to go
to this work methods. You see that we still
have this bounding box, but we can adjust
it more generally. So e.g. we can go to the bottom nodes and we
can move them to the side. So that way, our bottom part of this circle will be a little bit bigger than our top parts. So e.g. let's just go to our
nodes on the bottom right, and we will move it
toward the right side. When you have
something like that, let us move on to the left side and we will
do the same thing here. We go into the bottom left nodes and we are moving it
more to the left. Let's make it similar to what we have over our right side. Now you can see that our main shape of the circle is looking
quite differently. But it's not exactly
what we need. We will also go to the top part and we
will go to the middle on this bounding box and we will drag this shape
a little bit dark. And when you have
something like that, that is the exact shape
that we need for our bear. When you are ready, ledgers go back to
our top-left part and we will tap on
this S ribbon icon. We will deselect everything. And now we are ready
to go inside of this shape and we are
ready to add more details. So firstly, let's just go and find an approximate
center of the shape. We will create one line that is good vertically and one line that is going horizontally ledger start from
the vertical line. We are doing a little
bit above our shape and we are creating the line
going down the ends. We are holding our line. We are adjusting the angle
to make this line straight. If we need to adjust it or
if we need to move it more towards the center where I go in order it's
up to Edit Shape. Find what works for you. Find this approximate center
on the vertical axis. And when you are done, Let's just tap on the
screen and let's create a horizontal line the
same way as before. Just go in there and
creating the light, hold it and the ends. A jazz the NGO, if you need to adjust
it even more good, or that's up to Edit Shape. When you have this
approximate center, we will go inside
this little shape. We will go to this intersection and we will need to go above it. And we will need to
create two lines that are going through this
approximate center. They are at 45 degrees. So let's just go firstly
over the left side, we will put our Apple pencil
right in the middle part, where we have our
approximate center, and we will create
the line like that. Again, you can play
around with the angle, try to make it approximately 45 degree when you
haven't done one side. Let's move on to
the opposite side, and let's do the
same thing here. Try to keep the
angles similar to the one that you have
or your left side. And when you are done, we will go to these little
lines that we have just created and we will
need to put the ears. And these lines should
be right in the center. So let's go for a slow
or are left side, we will go above our
shape on the head. We will create half
of the circle there. Hold your land and the end. Adjust the size to your liking. Try to pull this
line at 45-degree, right in the middle
of this shape. If you need to
adjust it even more, go over the top to Edit Shape, play around with the shape, make it bigger or smaller. It's all up to you. Let's just go and do that. When you are satisfied
with your shape layer, just tap on the
screen and let's do the same thing on
the opposite side. So we are going above
our shape on the hat and we are starting by
creating half of the circle. Let's try to make it the same size that we have
over our left side. And let's keep the
same curvature. Hold your line and the ends go up to Edit Shape
and adjust it. When you are done,
let just tap on the screen and now we have
the base of the ears, but we will need to go inside of these two shapes that we
have just creates it. And we will need to
add the inner parts. So we will go firstly
over the left side. We will step a little bit
aside from this line that we have just creates it
and we will repeat it, go in a little bit
dark and again, adjusted by going over
the top to Edit Shape, tried to make it similar to the line that you have ordered. So parts when you
haven't done one side, Let's move on to the right and legs are the
same thing here. And when you are done, Let's just tap on the screen
and we have our ears. So now we can go inside of our shape and we can add
our facial features. So firstly, ledger
zoom in our Canvas. We will go over the left side. We will go to this line that we have on the horizontal axis. We will stop a little bit
aside from our center line, and we will put the first
dot for our left eye. You can play around
with the distance. You can play around
with the size. You can play with everything here when you have
the first eye, Let's move on to
the opposite side. And let's put the
second eye here, keeping the same distance from the center and keep
the same size. Now when we have our eyes, let just grab the eraser tool and we will erase this
middle part because we have too many lines right here and we actually
don't need them anymore. When we've cleaned out the
area between the eyes, we will need to continue bike
rated a little snout here. And for this now, we
will need to have the shape of the very
rounded triangle. If it's easier for you, we can start by creating a straight triangle and
then solving the corners. If you feel confident, you can just go there and
create the shape from scratch, you can play with the size, you can play with the position. If you are starting by
creating a straight triangle, ledgers go to the
corners and let's soften them by creating
the curse there. When you've softened
the corners, lets just grab our
eraser tool and we will erase everything
that we don't need here. Now let us get back to our brush and we will
add, Alito knows, so we will go to the top part of this triangle and we will
create another triangle here. We will turn it into a notes, as always, play around with the size and with
their position. When you have the nose, we will need to create
a little mouth. So let's just go to the bottom of the nose and we will create a vertical line like that where you have
the vertical line. We are ready to add
a little smile. So let's just go underneath
our vertical line and we will create half of the circle or half of the ellipse here, you can hold your line
and the answer you can play with the size,
with the position, with everything if you need
to adjust it even more, Let's go or the top
two aided sheep. And when you add down ledgers, tap on the screen and let's continue by creating our cheeks. So we will go
underneath the ice and we will add our circles there. One on each sect. Start by creating a circle
just with one line. Hold your Apple pencil
at the end on the line. Hold one of your
fingers on the screen. Adjust your size on the cheek. If you need to adjust the
placement, go over it. It's up to Edit Shape. When you have the first
sheet on one side, Let's move on to
the opposite one and let's do the
same thing here. So again, starting by creating a simple shape of the circle, holding our Apple
Pencil and the end, holding one of our
fingers on the screen, ejecting this size and go and
over-the-top to edit shape. Now, let's make sure
that these elements is similar to the one that we
have over our left side. So we will just move it there. We will make sure that
the size is right. And when we did it, we will just move it back under
our right eye, find the correct
position and ledger SAP on the screen with
one of our fingers. Now we have Armed Bear, and that means
that we can go and add a few additional elements. So e.g. let's just go over our little beer
and we will create a little sack the same way as we had on our Kan and
own our candy. So let's just go and create
some wobbly shape on the top. When you have it,
ledgers go inside of this shape and let's
write down juice. When you are ready. Let's just give it to some of
our blank spaces and lead, just add a few flowers. So what we need to do firstly, let's just go over
this bottom part that we have on our right. Let's create a little
ellipse or a little circle. We can hold our Apple Pencil. And now when we have
this little circle, we will go around
this little shape and we will add a few
petals with some loops. You can play around
with this size, play around with the amount
on this little petals. And when you hand
the first flower, ledgers go to some of our
blank spaces and lead, just add a few more. You can play around
with the size. You can play around
with their placements. If you want, you can put some of them behind our elements. So e.g. some of them behind the juice label or
it behind our bear. So just one part will be seen. Legends go and add
a few of them. And when you are done, aid in your beautification. We are done with
our third sketch. So in the next part, we will be creating
a milk packets.
5. Milk Carton Sketch: Let's start our last
gauge By go into this area that we have
on the bottom right, we will zoom in our
Canvas and we will start easily by creating a
shape of the rectangle. The same way as before. Just go into our Canvas and creating the shape
just with one line. Hold your Apple
pencil and the yen, snap it to a better shape. Go over this up to
Edit Shape if you have the option square
here, Let's select it. Let's move it a little bit down and a little
bit more to the lab because we will need to have some free space over
R, right, parts. When we are done,
Let's just tap on the screen and let's
create another rectangle. So we will go to our
right side and we will create another rectangle
here the same way as before, just with one line and the ends. We will hold it and we
will go up to Edit Shape. Now we will need to move this
shape to our first shape. So let's connect these two lines that we have over
our right side. And let's make these elements similar to the size that
we have on the left. Now when you have combined
these two shapes, ledgers go until this shape on the right just a little bit, and also we will make
it a little bit bigger. So firstly, we are
going to this node that we have on the top right? And we will move in that way. When you have this
line on the top, we will need to go to the
bottom and we will need to make this line parallel to the line that we
have on the top. So let's just grab
this node that we have on the bottom right? And let's try to do that. When you have
something like that, Let's just tap on the screen
to get away from this modes. And we will need
to go over the top of our big sheet
of our rectangle. And we will need to create
a few lines like that. So firstly, we are going over our left side where I go into this intersection right here, we will create a line
going in that direction. You can play around
with its size. You can play around
with a curvature. It's all up to you. Probably something
like that will be fine when you have it
over your left side. Let's move on to
this intersection. And from it we will
create a parallel line. Hold your land and the hands. And if you want to make
sure that this line is similar to the one that
you have on your left leg. Just go over the
top to edit shape. Let's move this line to your previous line and let's adjust the angle if we need to. When we are ready,
we will move it back to our right corner. And when you're done, let just tap on the
screen with one of our fingers to get
away from this mode. Now when we have
these construction, We will go over
our right side to this little corner
and we will create another diagonal line to connect this line that we
have over our left side. So let's just go
to the corner and let's connect these two lines. And when you aren't,
then we will go over the top and we will connect these two diagonal
lines with a straight line. So let's just go and do that. As always, hold your line and
the ends a jazz the angle. And when you are ready, we will need to go
to this corner. And from it, we will create another line going in the
horizontal direction. From it, we will go inside
the shape and we will create another horizontal line if you need to adjust it even more, or if you need to make sure that this line is parallel to the
line that we have on it. So you can move it, you can adjust the angle and you can get it back to
the needed place. And when we are done
with this construction, we will go over that soap and we will create another line here. So let just tap a little
bit from the top and we will create another line
going in that direction. Hold it at the end, make it parallel
to the line that we have a little bit below. And when you are done, we will need to connect
it with the main shape. We will make it by creating
straight lines going down. And when you did it, We
are done with our base. So that means that
we are ready to continue by creating
some beautification. Firstly, let us go to this little shade that
we have or our rights, and we will add the same tag
that we had on our juice. So firstly, we, I just go in there inside of the
shape and we are starting by creating a tingle
the same way as before, just with one line. Hold your Apple
pencil and the end. And let's go over the
top to edit shape, we will need to
make all the lines parallel to the ones that we already have on to this little shape
or the right parts. Let's just go and
try to play with this little notes to make sure that our lines are
parallel to the lines that we have over the
top and the bottom. We will just move our shape. If we need to adjust it, we will go and play
with our nodes. Firstly, we will move
with or that soap. We will adjust our little nodes and then we will move
it to the bottom. And again, we will do
the same thing here when we are done
adjusting the angles. Let's just go and move this whole shape more
toward the center. If you want to make
it smaller or bigger, it's all up to you. And when you are done with
this little shape layer, just tap on the screen to
get away from this mode. And we will go below this little shape and we will
create another rectangle. Let's just go and start by creating the shape
just with one line. Let's hold it at the
ends and let's do the same thing as we
did with our shape. Over the top. I go into Edit shape or the top. If we have the option rectangle, we will choose it and we will adjust the angle of the shape. Let's position it in that way. And when you have it, Let's just tap on the screen
and let's go inside of our first shape and let's add
some beautification here. So firstly, we will go and
add a few lines like that, try to make them parallel to the lines that you
have or the soap. And when you have them, we will go and we will add these little rectangles
the same way as before, just starting by creating
a shape of the rectangle. Hold it at the end and let's go over the top to edit shape. We will choose rectangle
from here and we will adjust it in accordance
with our lines. When you're done adjusting
the shape layer, just tap on the screen
and let's go inside this little shape and we will
add a few vertical lines. When we aren't done, we'll grab our eraser tool and we will erase this middle parts. If you need to adjust
some shapes ledgers, grab our brush one more time and let's adjust them manually. When you have these
little shapes, ledgers go below that. And let's add a little
heart here so you can go and start by
creating a shape like that. And when you have
it on one side, we will need to repeat
it on the opposite side. If you want to add
any other details, you are welcome to do it. Now when we had
this little heart, we will go to this little
rectangle that we have below and we will
write down 100%. And now we are ready
with our right part. So now let's just go to
this part that we have over-the-top and we will add a little label here
one more time. Let's just go and create
some wobbly sheep. When you have the
shape that you like. Let's just go inside of it
and let's write down milk. And when we are done with
our little labor ledgers, go to the front side and
let's add the beautification. We will start by creating
a little rabbit here. Again, we are going inside
of the shape and we are starting by creating a
little circle layer. Just go there and with one line, we will create our shape. We will hold our Apple
Pencil and the yens, and also will hold one of
our fingers on the screen. You can adjust the size to your liking if you need
to adjust it even more, or if you need to
place it differently, ledgers and hold
everything that we are holding right now.
And let's give 4D. It's up to Edit Shape. When you are done with
your sheep ledgers, go and adjust it even
more the same way as we did with the shape
of our bears hats. Firstly, we are doing
to our S ribbon icon to select this area using
the free hands method, going around the shape, looping it around
and closing it when this area and only
this area is selected, we go into our transform tool, which is our arrow key on the
top-left. Let's select it. If you want to adjust it
by scaling it up or down, you are using uniform method if you want to
adjust it even more. And this option we will
be using right now, we are going to warp and
we are tapping on it. Now we will start the same
way as we did with our beer. We are going firstly
to know that we have on the bottom right and we will move it toward
the right side. When you have
something like that, Let's just move on
over our left nodes and we will move it more
toward the left sides. And that is the
shape that we need. If you want to make it smaller, we will go to this
uniform methods. We will go to the node e.g. one that we have
on the top-right, and we will drag it
diagonally down. Let's position it
somewhere in the center. And when we are done, ledgers deselect
everything by going to our S ribbon icon and we will
tap on it one more time. The same way as we did
with our bare leg. Just start adjusting
our shape and adding the additional elements by finding the approximate center. So firstly, we are
going above our shape and we will create the
vertical line going down. Let's hold it and Leontes
and let's adjust the angle. If you need to put it
more towards the center, we are going over and it's up to Edit Shape and we are moving it. When you are done with
the vertical line, Let's just tap on the screen and let's create the
horizontal line. So again, just go in there
and creating the line, hold it and the end. Adjust the angle. If you need to
adjust it even more, go over the top to Edit Shape. And when we are done finding
this approximate center, we will need to go
over the top part and we will need
to add the ears. We will start by creating a very thin and very
elongated ellipse. Let us go and create
something like that. Hold it at the answer snap. It's a better shape and
let's just go over it. It's up to Edit Shape and
we will position our ear. Let's move it closer to our line that we
have in the center. And when you are done, let just tap on this green and let's create
the opposite ear. So the same way as before, just starting by
creating the shape of the very thin and very
elongated ellipse. Hold your line and the
Yan's a jazz this size. And let's just go over
the top to edit shape. Let's try to make it similar to the one that we have
over our left side's. Position it nicely. And when you're done, let just tap on the screen
to get away from this mode. Allege as grab our
eraser tool and we will erase this bottom parts. When you are done erasing this part of the ears that
we had on the button. Let just go to the middle
part of our ears to this size that we have near
Ireland in the middle. And we will need to turn
these little curves into the street lights when you
did it on the left ear. Let's do the same
on the right one. Now one more time. Let's just grab our
eraser tool and we will erase everything
that we don't need. And when we have our ears, we will need to go
inside of these shapes. We will need to repeat them. And in that way we will
add the inner parts. Firstly, let us go over our left side and let's
create this inner part. Just tap a little bit from the lines and just
go and repeat that. When you are done
with the first year, move on to the right and
do the same thing here. And when you aren't done, let just go and add
our facial features. Firstly, one more
time we are going to airline that we have on
the horizontal axis. We are stepping a little bit
from this middle line and we are beginning by creating
this circle for the eye. As always, you can play around with the distance
from the center. You can play around
with the size. It's all up to you when
you haven't done one side, Let's move on to the opposite
one and let's add the same. I hear tried to keep
the same distance from the center and try
to keep the same size. When you are done with
the second I ledgers just grab our eraser tool and we
will erase this middle part. When we are done with this task, let's grab our brush
one more time. Ledgers go between the ice and
we will start by creating. Alito knows the same way
as we did with our bare, just a little
triangle going down. Play with the size and play with the position
of these elements. When you have it, we
will go underneath it. We will create a little
line going down like that. And when we have it, we will create a little Smiley mouth. So let just go and create
half of the circle there. Play around with the curvature
whole July at the ends. If you need to adjust it
even more, go over it. It's up to Edit Shape. When you are done with
the little mouth, let just go underneath our eyes and we will
add the cheeks. So the same way as always, just go in there and starting by creating the
shape of the circle. Hold your line and the end. Hold one of your
fingers on the screen. Adjust the size of
your element here. If you need to
adjust the position, go over the top to edit shape when you have
it on one side, Let's move on to the right and let's add the same cheek here. Makes sure that the size is the same by going over the
top to edit shape, moving your shape to the previous one,
adjusting the size. And when you are done, we will just move it
back to the right and we will find the
position for it. When we are done, Let's just
tap on the screen and we will go to these cheeks and
we will add little whiskers. So firstly, let us go
over our left side. We will go to this cheek and we will add a few lines like that. As always, you can play with the distance from one another. You can play with their amounts. And when you are
done on one side, we will move on to the right and we will do the same thing here. Now we are done with
our Ambani select. Just go and add a
few more details. So firstly, we will go to this little corner that we
have on the bottom right. We will add a little
wobbly shape here. And inside of this little shape, we will write down how
big is the package. When we are done,
ledgers go to some of our places that are blank now and we will add some clouds. So the same way as we did
with our candy or with arc can let just start by going and creating the
horizontal line like that. When we have it, we will go over the top of it and we
will add a few loops. And now let's just go to some places and let's
add a few more clouds. You can play with their size. You can play with the position. You can play with
everything here. If you want to add more details, you are welcome to do. It ends when you
are done with Edin, your little details, we are
done with our last sketch. In the next part, we will
be adding the clean lines.
6. Adding Clean Lines: Before starting an
airline in part, led, just take a look at our Canvas and add our illustrations
in general. And let's decide whether we
want to change any of that. So e.g. we can go and make
some of them smaller font, a different position,
maybe make them bigger. Anything that we need to adjust
here we can do right now, we will need to do at
this stage of our sketch, because every time we are
adjusting our elements, we are worsening the
quality of the picture. And so we don't want to do that. So now let's just
take a look and if we need to adjust
some of the parts, Let's just go and grab our selection tool and
let's adjust our elements. So firstly, let us
go to our top-left. We will tap onto
the S ribbon icon. We will select freehand methods, and we will go e.g. further can, we will select
the whole shape and then we will go to our Transform tool and we
will make this thing smaller. So when only this
area is selected, we are going to our arrow
key or the top-left. We are using uniform methods and to make this
elements smaller, we will go to one of
the corners. So e.g. top-right, we will hold our Apple pencil there and we
will move diagonally down, find the size that you like. If you want to find a
different placement, just go and move this shape
to the place that you want when you are done
adjusting this element, Let's just tap onto our S ribbon icon to
deselect everything. And let's take a look at other elements and if
we want to adjust them, ledgers go and do that. Use your selection tool
to select the object and transform tool to scale it down and find a
different position. And when you are done
adjusting your elements, we will need to go to our
layers and we will need to create one more layer
for our login part. So let just go above
early with the sketch. We will tap on the plus
icon straightaway. Let's rename it as clean lights. So we are tapping on the
layer and choose Rename when we have a new layer
for our clean lines. And while we're still
here under our layers, we will need to do
one more thing. We will need to change the opacity level of
earlier with the sketch. We want to see what's happening earlier with
this gauge and we want to see what will happen onto our layer with
a clean lines. So we will need to go and make
these owners that we have owns it earlier
with the sketch a little bit more transparent. So let's just go to this layer with the sketch tool selected, and we will tap onto this
little icon near the checkbox. Now you can see that we have a slider that is called opacity. And we can go to this little handle that we have over there, right part, and we can move with more toward the left side. You can see that now
your illustrations are looking more transparent and
that's exactly what we need. We still want to see what's
happening onto this layer, but we don't want
it to bother us later on when we are going to be creating the clean lines. Now, you can just go to
this opacity slider and find the capacity level that works for you when you angina. We will tap on this
layer with the sketch one more time to
close this window. And later on we will go to the clean lines layer
and we will select it. Now we are done with
our Layers panel, but we will need to go
and change the brush. So we go into our brush library. I go into the calligraphy folder and we are choosing
mono line brush. While we are still here
under the brush library, we can go and change
our brush just a little bit so it will be easier for
us to create the lights. I just tap onto our
monoline brush. You will go into the
brush studio and we will need to go under stabilization
over the left side. And when we are under the
stabilization folder, you can see that
on the top we have the value that is
called streamline, and this value has
the option amounts. We can go to the slider
and we can change it. So when it is at the low value, we can go to our drawing pad and we can try out how it works. Let us go and create
some line here. You can see that we have all the control in the
world under this line. But it is known that
smooth, it is jagged. It's not what we need. We will need to go to this amount and we will
need to increase it. Now when you are
at the high value, let us go and try
out one more time. Now you can see that you
lost some control over it. But you see that this line is more smooth than the
line that we had before. So you can play around with
the amount right here, find what works for you. And when you are down
ledgers he'd done. If it's not working for you when you are
creating the lines, you always can get back to
this value and change it. Now when we are done
adjusting our own brush, Let's just go and find this
size that will work for us. Let's just go to
our top-left slider and we will do and find 2% or 3% of the sets
if we want later on to go and change
the amounts over the brush and make
sure that we will get to the same amount of the size later on that
we were using before, we will need to go and save
this amount of percentage. So we will go back to
our little slider. We will find the value that
we need and we will tap once to this little handle that we have honored the slider. You can see that we have
a little window here. And if we go to this plus
icon and we will tap on it, you will have a little mark
down onto this slider. So later on, if you would go and change the
size of the brush, you can always get back to
this amount that you saved. You just need to tap on it
and you will get back to it. So now let us get back
to our brush ledgers go and zoom in our Canvas
to the first picture. And what we need
to do right here onto our layer with
the clean lines, the main goal is to create the clothes clean
and smooth lines. Close lines means that you
don't have any gaps and that we will need later on when we are going to
be aiding our colors. So now let's just go and add
the clean lines to our Can. We can use all the
instruments that we use before you can hold
your line and the Yan's, you can just go over
the top to edit shape, adjust it to your liking. And remember that you
don't need to repeat everything with 100 per
cent of similarity. If you want to adjust
some elements, if you want to make them
in a different way, you are welcome to do it. So now let's just go and
create our first slide. Let's just go over
the left side. We will go and recreate this big curve that
we have on the site. Just go there, repeat the line, hold it at the end
and when you have it, let us move on and
create another line. Also remember that you
don't need to create the whole shape just with
one line if you want. So you can do that, but also you can go and create
just the part of the line and then
later on connected with another line
in a smooth way. So let's just go and connect
these two shapes that we just created with
a line on the bottom. If you need to go over
the top to edit shape, go there and play
with the handouts. If you see that you have some connections that
are not that smooth, you can do manual
and adjust them. Just grab the eraser to erase the part that
you don't need. And if you have a little part that you need to
adjust with the brush, just go over and adjust it. When we have the base layer, just go over the top and we will align this part
that we have on the top of the can the same way as with
these lines on the sides. We will start by creating a
little curve on the bottom, connect the lines nicely and
try not to make any gaps. Let's just go all over
of our shape and we will add these lines that
we have on to our account. And when we've added the
lines to the whole shape, alleges go back to our layers and we will
do one more thing here, just for 1 s. We will hide
our layer with the sketch to make sure that everything here
is nice, closed and clean. Ledgers go back to our
layer with the sketch, we can select it or not. We will need to go to
this little Chatbox near the icon n, and we will need to tap on it. Now let us get back to
our canvas and let's just make sure that everything
here is nice and closed. If we need to adjust some parts, if we need to smooth in some
corners or some connections, we will grab our areas or two. We will grab our brush
and we will adjust them. When you are done adjusting and making sure that
everything here is closed. Ledgers, get back to our layers and we will unhide
our layer with this gauge to go further
and create other lines. So again, we are getting into this little checkbox and
we are tapping on it. Now when we have
our sketch back, Let's just move on to
the next illustration and we will add the lines here. Ledgers go to our Kenzie
and as you can see, we have straight lines here. We can go with the same
way as we did with art, can manually create this line, but we don't need to
do that to be honest, we can go and use one of the
options that Procreate has. So what we need to do,
we will need to go to this wrench icon
or the top-left, and two will need
to go under Canvas. You can see that we have the
option drawing guide here. Let's toggle it. Now. If you take a look
at your Canvas, you will see that
you have degree that is going through the whole
shape of your canvas. But we will need to do
one more thing here. We will need to go under
Edit Drawing Guide. We will be using 2D grid, but we also will need to go to our bottom right
corner and we will need to toggle
assisted drawing here. When we toggle in
assistant drawing, all these grid that you see onto your canvas will help us to
create these straight lines. You just go along
them and you will be creating only
the straight lines. Ledgers go and tap on Dan and we will go to
this little shape of the candy that we have to all of these straight lines and we
will go and create them. Let's see how easily
we can do that. So let's just go all over the sheep and we will
create the street lights. And when we've added the straight lines to
our candy ledgers, go to our two remaining
objects and we will make these lines that are straight on them the same way
as with the candy. We will just go
find the lines that are either horizontal
or vertical, and we will do them
with these options. And when you are done, agent, the street lines, we will need to go and turn
on this option. So one more time we are going to arrange Eigen over the top-left. We are going under Canvas and we will toggle
drawing guide here. You will get rid on
this grid that is going through the whole
shape of your canvas, but that is not enough. We will need to do
one more thing. We will go back to our layers. And you can see
that our layer with a clean lines now
is called assisted. So if we just get
back to earlier and if we try to
create some lines, they still will be
horizontal or vertical. We will need to go
back to our layers. We will need to
tap on this layer with a clean lines and manually, we will need to turn it off. So in this little list, we will need to select
Drawing Assist. Now when we turned it off, Let's just go and add
the rest of the lights. Remember that you need to add the smooth
connections and units, all your shapes to be closed. When you are done
adding all the lines, let us get back to our layers and we will hide our
layer with the sketch. We will go through all of
our illustrations and we will make sure that all of
them are closed, smooth, and nice if we would want
to change some places, if we need to erase some parts
or adjust our connections, we will grab our brush, we'll grab our eraser
tool and we will do that. Make sure that all the lines are closed and
when you are done, we will move on to
the next chapter where we add our colors.
7. Adding Colors: Left eye color in part from
some tiny preparations, we have a few options that we can use to add the
colors in Procreate. We can go to this layer that
we have our alliance own. We can add the color here, but if I would like to change the color of our lines later on, it will be quite
impossible for us. So that's not what we need. We can go and create
another layer and manually recolor the areas, but it is too time-consuming, so we can go and
add the colors with the color drop method
on the separate layer. And let's go and do that. So firstly, we
will need to go to our layers and we will need to create the layer underneath
our layer with a clean lines. Just tap on our layer
with the sketch. And from here, we will tap on the plus icon and we will
create the layer in that way. When we have a new layer, we will go entry
name it as colors. So let's tap on it and
let's choose Rename. And now, as I mentioned before, we will be adding the colors
with the color drop method. And that means that we are going to our top-right corner and we add dragging and
dropping the color to the areas that we
want to recolor. But if we go straight to this layer with our
colors and if we do it, nothing good will happen. We will recolor
the whole canvas. That's not what we need. So we will need to
do one more thing. Let us get back to our
layers and we will need to go to our layer
with a clean lines. We will select it, we will tap on it, and we
will choose reference. These lines that we have once or hourly with a clean lines will work not only on this layer
but on other layers too. So we can use them
to add the colors. Ledgers, get back to our layer with the colors and we will go to our color palettes and we will start
adding the colors. So firstly, let's select the
color with the name yellow. And we will go to our
top-right corner and we will drag this color
to our juice books. When you did it,
you will see that we have this option on the top. Continue with recoloring. We can tap on it
and we can use it. You can see when
we tapped on it, we have a little handle that we can move to the place
that we want to recolor. Just go and do it, and
we will move it to this area on the
right of the box. When we did it, we can do
to the rest of the areas and we can tap on them and we will recolor
them in that way. So let's just try
it out on the top. Just tap on this area and you will see that you
have recolored it. Ledgers do it with
the rest of the areas with the same color and
with the same method, we will go inside of our flowers and we will
recolor these middle parts. If you want to add this
color to different places, you are welcome to do it. E.g. let's just go and maybe
end this color to our Kan, to the bottom part
and to the top one. If you want to end this color to the stars or to other areas, you are welcome to do it. When you are done with
the first color ledgers, go to this little magic
wand icon on the top-left. We will tap on it to
deselect everything, and we will tap on it one more time to get
rid of this list. Now we can get back to our color palettes and
select the next color. This time, let's go with
light vibrant yellow, and the same way as
with the first color, we will go and recolor
some of the areas. Firstly, it just grabbing the color and dragging
it to the sun, e.g. then going to continue
feeling with Recolor and moving this handle to the
area that we want to recolor. When you did it sled, just go and tap on the rest of the areas that we want to
recolor with this color. When you are done
with this color LED, just tap onto our
magic one tool, we will get back to our color
palettes and we will select the next color and we will
add it to some areas. So e.g. let's go
with BIM, correct. We will go and drag this
color to some of the areas. When you are done
with this color, Let's deselect everything
by hitting our magic wand. So let's get back to our color palettes and fled
select the next color, e.g. let's just go with red,
orange, this color. We will go to this
label with a juice, and we also will go to
the top part of our Ken. When you are done
with this color, let us go back to our color palettes and
select the next color. So this time it will
be this color blue. These colors we will
add to our candy. Also this color we can add to any other areas that you like when you aren't
down ledgers. Get back to our color palettes. Let's select the color
with the name sky blue. These color we will add to
their wrapper to this star is, and also to the whole
shape of our milk box. When we aren't done
deselect everything. Let's get back to our
color palettes and let's select the color
with the name White. These color we will add to
the clouds and to the labels. And also we can add this color to the inner part of our milk. When you are done,
Let's deselect everything and let's get
back to our color palettes. We will select the color
with the name Brown. With this color, we
will recolor our bear. When you are done with the
main colors of our bear, Let's deselect everything by
hitting our Magic Wand Tool. And let's get back to
our color palettes to select the color
within the inquiry. This color we will add to this now to the inner
parts on the ears. We will add it to our bunny, to the ears of the bunny and to some areas that you
want to end this color to. Maybe we can add this
color to our flowers too. When you are done, Let's deselect
everything and let's select the color within
the same light, pink, these color we will add
to this little label, yummy, enter the inner parts
on the ears of our rabbits. Now you can notice that
we added no color to our, can also edit no
color to our rainbow. That's because we will
create another layer and we will add some details
to these main shapes. So let us go back to our
layers and we will go again to our live with this
gauge and we will create one more layer from here. You can leave it without
any name for now, because later on we can merge
all the layers together. So now onto this layer, we will go back to
our color palettes. We will select the color
with the name pink, red. And these color we will add
to the main shape of art can, and also to our rainbow. Now when we have
the basic color, Let's just go and add
some details here. So firstly, we will need to go back to our layers
and we will need to make sure that
we will be adding the details only on
the existing areas. And that means that
we will need to adjust this layer
just a little bit. We will need to tap on
it and we will need to choose Alpha
Lock from the list. When we have turned
on alpha lock, we will be adding
the details only on the areas that we already
have on to this layer. We won't be going
beyond the frames, beyond the colors
that we already have. But we can go inside of the shapes and we can
add the details here. So e.g. let's start
from our camp. Let us get back to
our color palettes and let's select
another color, e.g. let's select the
color red, orange. Let's increase the size of our brush and we
will go inside of the sheep and we will add some stripes with this
color, just one strap. You can play around with how thick you want this line to be. And when you are done, ledgers go and select
another color. So e.g. we can go with this yellow color,
with this color. Let's just go and
add another stripe. When you are done
with this color, Let's just get back to
the color palettes and let's select the color
with light pink name. With this color, we will give
it ends at another stripe. And now we are done
with our candle. I just go and adjust
our little rainbow. We will firstly go to our color palettes and we will select the color with
the name yellow. We will go inside of the
shape of our rainbow. We will step a little
bit from the top and we will create
another curves there. The current that will recreate the curvature of our rainbow, hold your land and the ends
if you need to adjust it, just go over this loop to
aided sheep tried to make this curve parallel
to the line that you have on the top
of the rainbow. And when you are done, Let's just tap on the screen. Let's select another color and let's add it to the bottom part. So let us get back to
our color palettes. Let's let the color within
the light vibrant yellow. And we will go to
the bottom and we will add the same curve there. Again, hold it on the ends,
adjust the curvature. If you need to
adjust it even more, go over the top to edit shape. When you are done, Let's tap on the screen and Lynch's
get back to our layers. And we will combine these
two layers with color. And together, we will need to go to our layer with the
colors on the top. We will need to tap on it and we will need to
choose Merge Down. Now everything is on one layer, but we lost our name here so
we can go tap on this layer, choose Rename, Enter,
name it one more time. Now, if you remember, we had little cheeks onto
our layer with the sketch. So let's just go and
add them manually. Firstly, legis, make sure
that we are adding them only places that we're onto our
layer with this gauge. And to do so, we will just need to select our layer
with the sketch, and we will need to move it above earlier with the colors. Let's just hold it onto our layers panel and
let's just drag it up. Now let's unhide it by going
to this little checkbox. And when we did it, now we can see our sketch. So we can get back to
earlier with the colors. We can just go back to
our color palettes, select the color for the cheeks. So e.g. let's add this color
with an aim light pink. Let's just go to
these areas and with one dot by adjusting
the size of our brush, we will go and add our cheeks. When you are done
with this task, let's just get back
to our layers and let's just hide our layer with
this gauge one more time. The last thing that
we will do is go into some of our lines
and recoloring them. So let's do it in that way. We will firstly go to our
layer with a clean lines and we will turn off reference because we don't
need it anymore. So I just tap on the layer and let's choose reference
from the list. Also to change the
color of our lines, we will be using alpha lock
onto this layer again. So let just tap on the layer and let's choose Alpha
Lock from the list. Now when we have alpha
log onto our lives, alleges go and select a
different color. So e.g. let's start with
the color within the lines to we will
go grab our brush, will increase its size, and we will go along the
lines onto our candy. Firstly, we will add
the colors in that way. When you did it with
the candy ledgers, go over our milk packets and we will do the
same thing here. Just go all over your lines and add the
different color here. When you are done, ledgers get back to
our color palettes. Let's select the color
with the name wide. And we will go alone of our little titles,
yummy sweet milk. And we will recolor
these lines too. And when they are
done with this task, we are done with the
whole illustration. Thank you for
watching this class. Leave a review if you liked it and consider subscribing
farm worker. Why videos in the future, looking forward to
seeing your projects.
Uni Corn, ⭐Kawaii Art Enthusiast⭐
