Autodesk Revit Architecture Masterclass: A Complete Guide for Beginners | Ozgur Gorgun | Skillshare
Search

Playback Speed


  • 0.5x
  • 1x (Normal)
  • 1.25x
  • 1.5x
  • 2x

Autodesk Revit Architecture Masterclass: A Complete Guide for Beginners

teacher avatar Ozgur Gorgun, Adobe & Maxon Certified Instructor

Watch this class and thousands more

Get unlimited access to every class
Taught by industry leaders & working professionals
Topics include illustration, design, photography, and more

Watch this class and thousands more

Get unlimited access to every class
Taught by industry leaders & working professionals
Topics include illustration, design, photography, and more

Lessons in This Class

    • 1.

      Introduction

      1:27

    • 2.

      1.1 The Start Screen

      2:20

    • 3.

      1.2 File Tab, Quick Access, Info Centre

      4:12

    • 4.

      1.3 Tabs, Ribbons and Panels

      1:18

    • 5.

      1.4 Properties Palette and Project Browser

      2:57

    • 6.

      1.5 Status Bar, View Controls, Selection Toggles and Context Menu

      7:37

    • 7.

      1.6 Navigating the Drawing Area

      3:29

    • 8.

      1.7 Contextual Tab

      1:32

    • 9.

      1.8 Terminology

      3:10

    • 10.

      2.1 Introduction to Walls and Wall Panel

      10:40

    • 11.

      2.2 Wall Options Bar

      10:44

    • 12.

      2.3 Wall Properties palette

      3:28

    • 13.

      3.1 Align, Offset, Mirror

      4:04

    • 14.

      3.2 Move, Copy, Rotate, Trim Extend

      7:06

    • 15.

      3.3 Split element, Pin, Array, Scale, Delete

      6:37

    • 16.

      4.1 Building Levels

      13:03

    • 17.

      4.2 Grid System

      6:27

    • 18.

      5.1 Structural Column

      4:29

    • 19.

      5.2 Architectural Columns

      3:11

    • 20.

      5.3 Placing External Walls

      4:16

    • 21.

      5.4 Placing Internal Walls

      5:52

    • 22.

      5.5 Using the Equality Constraints

      7:05

    • 23.

      5.6 Placing the Ground Floor Slab

      6:06

    • 24.

      5.7 Placing a boundary footpath

      3:26

    • 25.

      6.1 Placing Doors from the Type Selector

      5:14

    • 26.

      6.2 Loading Doors from the Library

      2:18

    • 27.

      6.3 Creating a new Door Type

      4:34

    • 28.

      6.4 Adding a Wall Opening

      7:04

    • 29.

      6.5 Editing the Walls Profile to create an opening

      2:23

    • 30.

      6.6 Adding a Structural Opening to the wall

      3:14

    • 31.

      6.7 Placing Windows

      4:20

    • 32.

      7.1 Increasing Top Constraint

      3:55

    • 33.

      7.2 Placing the First Floor slab

      5:09

    • 34.

      7.3 Adding a Shaft Opening to the slab

      2:44

    • 35.

      7.4 Selection Filter and Aligned to Selected Levels

      7:24

    • 36.

      8.1 Stair by Component

      5:56

    • 37.

      8.2 Stair by Sketch

      4:22

    • 38.

      8.3 Creating project stair

      7:17

    • 39.

      8.4 Placing a Railing

      1:47

    • 40.

      8.5 Creating a Railing

      6:31

    • 41.

      9.1 Introduction to roofs by Footprint

      12:01

    • 42.

      9.2 Pitched roof by Footprint

      4:34

    • 43.

      9.3 Flat roof by Footprint

      3:39

    • 44.

      9.4 Roof by Extrusion

      3:12

    • 45.

      10.1 Introduction to Curtain walls

      6:19

    • 46.

      10.2 Constructing a Curtain wall

      4:00

    • 47.

      10.3 Curtain Wall Entrance

      9:55

    • 48.

      10.4 Curtain Wall Rear

      5:18

    • 49.

      10.5 Curtain wall front

      2:50

    • 50.

      11.1 Introduction to Reflected Ceilings

      6:17

    • 51.

      11.2 Adjusting the Ceiling position

      0:53

    • 52.

      11.3 Creating the First Floor Ceiling Plan

      1:30

    • 53.

      11.4 Adding Components to the Ceiling

      7:18

    • 54.

      11.5 Example of Rendered ceiling components

      1:40

    • 55.

      12.1 Setting up a Callout

      3:43

    • 56.

      12.2 Masking and Filled Regions

      2:14

    • 57.

      12.3 Detail Components and Repeating Detail Components

      7:06

    • 58.

      12.4 Placing Insulation

      0:29

    • 59.

      12.5 Using the Detail Line and Creating a Line Style

      3:01

    • 60.

      12.6 Adding Text with Leaders

      3:52

    • 61.

      12.7 Adding Break Lines

      1:11

    • 62.

      13.1 Introduction to Dimensions by Individual References

      4:28

    • 63.

      13.2 Dimension by Entire Wall

      1:32

    • 64.

      13.3 Witness Lines

      1:18

    • 65.

      13.4 Modifying a Dimension

      0:47

    • 66.

      14.1 Introduction to Tags

      4:07

    • 67.

      14.2 Adding information to the Tags

      5:18

    • 68.

      14.3 Placing Window Tags

      4:47

    • 69.

      14.4 Placing Wall Tags

      1:55

    • 70.

      14.5 Applying Tags to First Floor

      2:15

    • 71.

      14.6 Creating a Room and Placing Room Tags

      9:00

    • 72.

      14.7 Creating a Room Legend

      2:42

    • 73.

      14.8 Creating a Room Schedule

      5:23

    • 74.

      14.9 Creating a Door Schedule

      10:40

    • 75.

      14.10 Creating a Window Schedule

      2:32

    • 76.

      14.11 Creating a Door and Window Legend

      10:20

    • 77.

      15.1 Introduction to Shadows and Sun settings

      3:54

    • 78.

      15.2 Creating a One-Day Solar Study

      3:28

    • 79.

      15.3 Introduction to Rendering and Rendering first image

      12:54

    • 80.

      15.4 Rendering second image

      6:41

    • 81.

      15.5 Introduction to Walkthroughs

      6:05

    • 82.

      15.6 Modifying a Walkthrough

      2:23

    • 83.

      15.7 Creating a Walkthrough over two levels

      5:57

    • 84.

      16.1 Opening a Sheet and overview of the Title-block

      1:35

    • 85.

      16.2 Setting up a Sheet part 1

      8:55

    • 86.

      16.3 Setting up a Sheet part 2

      8:38

    • 87.

      16.4 Adding Render views and Callouts to Sheet

      2:16

    • 88.

      16.5 Loading an A2 Title-block

      3:09

    • 89.

      16.6 Duplicating views

      3:03

    • 90.

      16.7 Page Setup and Printing

      2:43

  • --
  • Beginner level
  • Intermediate level
  • Advanced level
  • All levels

Community Generated

The level is determined by a majority opinion of students who have reviewed this class. The teacher's recommendation is shown until at least 5 student responses are collected.

6,930

Students

20

Projects

About This Class

If you are looking to learn the foundations of Autodesk Revit Architecture, look no more! This course is for those who are looking to learn this industry standard BIM software from the ground up. With hands-on practice, you will learn everything you need to know in order to create professional BIM Projects.

Packed with over 7 hours of video lessons, this course will get you from knowing nothing, up to a level where you can start working with Revit. You will be able to download all the training and exercise files to accompany the lectures so you can follow along.

Meet Your Teacher

Teacher Profile Image

Ozgur Gorgun

Adobe & Maxon Certified Instructor

Teacher

Hello, I'm Ozgur. I'm an award winning filmmaker, photographer and motion designer. I've been been working in the film and TV industry both in the UK and abroad for over a decade. 

I'm an Adobe Certified Expert, Video Specialist and Instructor. I'm also one of the very few Maxon Certified Cinema 4D Trainers in the world.

I've taught and worked with some of the biggest names in the industry such as SKY, BBC, Sony Pictures, ITV, Google, Microsoft, to name a few.

See full profile

Level: All Levels

Class Ratings

Expectations Met?
    Exceeded!
  • 0%
  • Yes
  • 0%
  • Somewhat
  • 0%
  • Not really
  • 0%

Why Join Skillshare?

Take award-winning Skillshare Original Classes

Each class has short lessons, hands-on projects

Your membership supports Skillshare teachers

Learn From Anywhere

Take classes on the go with the Skillshare app. Stream or download to watch on the plane, the subway, or wherever you learn best.

Transcripts

1. Introduction: Hi and welcome to this training course on Autodesk Rivet architecture. On this course, I'm accompanied by my colleague. Steve was an excellent architect, and they're ever trainer. By the time you complete this course, you'll have the skills and knowledge to take a project from start to finish, as Steve takes us through the ins and outs off rivets, As with him, you work solely on one single project, so this course is constructed in the same man. If you don't have any previous experience with rivets or any other cat based software, don't worry. We will start from the beginning, building you up to be more than capable of creating your own rivet models. The course will start with the basics from the terminology used rivets toe the tools and the interface. We will then move on to building our projects, introducing a new tool and future as we progress. You'll learn all about that, um, elements such as the levels and grades, the structural components, such as the structural and architectural columns. You'll also learn the major and the minor components like the walls, windows, doors, floors, stairs, ceilings, curtain walls and roofs will then take it to the next level and learn how to create to the details out a tag. Components create schedules and legends create render images and video walk throughs. Finally, we will set up our sheets and send them to Prince. Together with the video lessons, you'll have access to the course notes and the training files to follow. So if you're ready to learn rivet, let's get started. 2. 1.1 The Start Screen: when we open up, the software were greeted with the start screen. The start screen is divided up into the project section in the family's section on The resource is starting with the project section. On the left hand side, we have open new on four variations of a template. If we select open, that will bring us into our common drive, where we can load in a past project. If we select new will start a new project. Once we do select new, we then do have to specify what type of template we're going to be using. We can also browse a specific template. We can create a new project from scratch, or we can create a project template below that we have the four different templates currently loaded into this software. We have a construction template, architectural template, structural and mechanical. So, depending on the reason you're using this software, whether it be for construction, purpose architectural, creating the structure or adding in the mechanical, this is where we then choose that template to the right of that, we have our recently opened documents, so it's a quick access in order for us to open up a pass project quickly. Below. That is the family's section. Again, we can click on Open, which will go into our common drive. Select new gin will open up our project section to the right of that again is the foremost recently opened families. Over to the right is the resource is section. Here we can find out what's new. We can get some help. We can watch some quick tip videos. We can go into the auto desk up store. The rev it community is a form where if you're having any issues, you confined it some tips as more than likely the issue. You you're having someone else's have in the past and will have posted the information of how they resolve the situation. Then the bottom left word says Auto Desk Rabbit. If we click on that will bring us to the auto Desk website where again you can find out some tips and so forth 3. 1.2 File Tab, Quick Access, Info Centre: with this course, I'll only be using the architectural template in a metric format. Okay, to get started, we're not going to go and cook on the architectural template on the first thing we'll do whenever we open up. A new project is we're going to save it to save our project will go to file save, then the save as dialog box will appear. At this point, you should save it other to your desktop or created a new folder on your common drive to save the project into Well, then we'll name our project. For now, though, I'm quite happy with Project One and then we'll click on Save. The first thing I'm going to be looking at is our file tub within the file tub. It's very similar to the majority of programs nowadays, where we have new to create a new project we can open or going to our common drive. We can save like we've just done save ours export and so on. When we could get to the bottom and having nothing selected in there, you can see the various different projects that I've recently opened on. The one of the top is our current drawing. Whenever we open up new projects, it's going to pull this project down the list. So if I wanted that project to always be on my recently opened documents section, there's a small little pin to the right. Inside, we click on that. It's gonna pin it to the recent documents, and it will always be displayed down the bottom. Here we have our options. Onda. We can exit rabbits or the exit the program, then just above the file tab. We have a quick access panel. So the quick access panel is just a panel which contains some tools and features that we're going to use time and time again. I'm able to open up a new project. Saved my current. I have undo redo my actions I'm able to print. Then I have my measurements to which will measure between two points. My dimension to I can tag category have some text this little three D house here that will bring me into my three d view. I have a section view thin lines close hidden windows on switch windows. Each one of these tools were going to go over again and again throughout the project. so you get a full understanding of how each one works. If I wanted to add in a specific tool or subtract them out at the very end, as it'll drop down arrow where I can have and subtract various tools, we can also change the position so I can show below the ribbon. Then in the center here, this is displaying our project name as well as the current view that were on over to the right. We have what is known as the Info Centre. So if I wanted to find out some information, I can type it into the search bar here on. I'll bring me to that information. They were able to access the auto desk a 3 60 This is a very useful application with Rev it . So if I'm working on a floor plan or I generate some images, I can upload it to my A 3 60 And then when I go on site or meet a client, I can log into my A 3 60 from any PC, and I can show my work. It's a cloud based system that auto desk have created very useful to so the writer that with the shopping cart that will bring you into the auto desk app store, where you'll find a lot of different plug ins and so on for the software. And then, finally, is the help area, so that will bring you again onto their online system, where you can find out any information of what you need to help in. 4. 1.3 Tabs, Ribbons and Panels: auto desk of Very cleverly organized all of our tools in a series of tabs on ribbons to every series of tabs along the top. So within each tub is what is called a ribbon. So this top section here that is known as a ribbon on each one of the ribbons will be a Siri's off panels. So in the architecture top within this architecture ribbon, we have our build panel, circulation panel, model panel, rumen area and so on. So all of the tools and so forth have been grouped nice and neatly together in their own specific panels again throughout the course, we're going to go through each one of the tabs on each one of those panels so you can get to grips with each one of the tools. But for the majority of the course, we're gonna be sticking with the architecture tab. So everything you see on screen now is what we're going to be building our model with. So within the panels themselves. You also noticed some of the tools will have a small little arrow beneath it that will reveal additional tools for that specific tool 5. 1.4 Properties Palette and Project Browser: next, we're going to be looking at the property's palette, which is over here on the left hand side as well. We'll be looking at the project present. If neither of those two are open at the moment, it's not a problem if you go to our view top at the top at the very end, there's the user interface so we can click on that. In there, you'll see our project browser on our properties. So does make sure that they're both turned on these two palettes or something that you're going to be using day in day out so you'll always have them turned on. So the properties polit will display the properties off. Either the current view of nothing is selected. It will also take on the properties off any element that you have selected. So, for example, I'm going to draw a wall in the drawing space. No, the wall has been drawn. If I selected your notice, the Properties Palace is now displaying the properties off that wall. The first thing here you'll see, is called the type selector of With the Arrow There, it now displays the various types of walls that we can choose from these walls will be loaded into your project by default. So when there were to select one from the library that is using the type selector below that, we're able to select the edit type of the model does we can edit the wall type itself below the edit type? We have a few different headings. We have our constraints heading our structural heading, dimensions on identity data as well as the phasing. So when the property section is where we can edit whatever component we have selected as we progress in the course, we'll go into a lot more detail about what each individual heading does. So if I had double escape, I d select that wall you're noticing. The properties public now displays the properties off the view that I'm currently in so you can see there's the Properties. Pilot has never changed its headings and so on on its now displaying the properties of the current view, Select the wall, I'm going to delete it. Next is the project browser. The project browser just contains all of the various views the schedules sheets on groups off the current project. What we're going to focus mainly on for the next while will be our floor plans. Where you can see here we're currently on level zero. So the remaining headings there you'll slowly pick up over the next couple of videos. 6. 1.5 Status Bar, View Controls, Selection Toggles and Context Menu: Next we have the Starters bar, which is down in the bottom left hand corner where currently says Ready. If you're familiar with auto card, this is almost like the command line. All that will do is just display information about how to use that tool. It would also give us some tips and hints on what the next step will be. So to give you an example, if I choose my Walter, it's asking me to click to Enter Wall Start Point. So our click it's now telling me to enter the wall and point, and it also is telling me that space bar flips the orientation. So if you're ever unsure of what your next step is, just referred them to the status bar. Next is the view controls, which is down here in the left hand corner. The first thing there, in our view controls, is the scale with rabbits when we're creating our view. So currently we're on our level zero if you refer over to a project browser, so we apply the scale to this actual view again. If you're familiar with AutoCAD, so in your model space you'll have a scale of 1 to 1 and then in your paper space. That's where you'll create your view ports on, then scale on your sheet. So with rabbit, what you do is you apply all off your visualizations and scale ings, etcetera to that specific view. So it's currently said to want toward hundreds. If you selected, you'll see our list are typical list of scales. If what you want isn't there again, just selecting custom, we can create a new scale. Next is the detail level. For this I'm going to place a small wall with the detail level. We have three options. We have coarse, medium and fine. That was referring to the level off detail currently associated with that wall. So right now we're able to see brick cavity block and plasterboard. We can adjust that level of detail if we want to display nothing. So if I change over to course, we'll just get a great out hutch. We have our medium on fine Minimum. Finer would generally have the same detail finish. But if we were to display, for example, a door or a window which would have more detail than a wall, then you again you'd see the variances between the medium. Fine. So the purpose of that if I go back to our course level. If we were doing just typical sale plans or planning drawing, we don't want to show the full detail level off the current wall, so we'll just use the course. Next is the visual style for this. I'm going to go into my three D view. If you want to follow along, we'll go up to the quick access toolbar at the top. On There is the three D View will select that, and there's the three D View off my wall. So our next option, the visual style. There we have our wire frame, hidden line shaded, consistent colors. Unrealistic that is referring to the visual style off this wall. So if I revert that back to wire frame, you'll see becomes a transparent ball. We have our hidden line, where it's no longer transparent. Shaded will introduce colors. We have a consistent color with no shading. We have a realistic, which was a realistic image off the brickwork. No, obviously, the wire frame is going to use up a lot less off the CPU usage than the realistic mode. So for general modeling. It's always best to either use wire frame or hidden line. If you were to model in realistic all the time, your computer's gonna be very slow on. It's a possibility off the software crashing. So while modeling, we'll stick with the hidden line. Next we have the sun, so we're able to display the sun in the project. We're able to put it to a specific location. This is something we will, of course, cover in this course. Once you have set up your son, you can then turn on your shadows so we can also have that shadow was cast by changing the sun settings. Then we have our quick access to render our image. Then we have quick access here to show our crop, make our car visible. If we're happy with our three D view, we can actually lock this view in position and then use that for print or putting into a sheet later on. Next we have the glasses symbol on. That is a temporary hide or isolate. So if we wanted to temporarily hide on object or to isolate the object to solely work on that, we would use the glasses the small light bulb beside it is how we can then reveal what's hidden in the drawing on. The remaining views were not going to cover in this course. Then over on the bottom lights on corner, we have what I called selection toggles. I'm gonna go back to level zero in my project browser, so it's double click on level zero to go back. So to go over the selection toggles the 1st 1 There is a select links, So when we link in a drawing or cat farms on, we can use this to select from. If we have created an underlay we wanted to then selected, we'll use the select underlay if we have pinned any elements in the drawing. This is where we can select them. The next one is called Select Element by face. This is basically were able to select an element by its face. So if we had a floor slab, we can click on the actual face off the floor slab instead of clicking on the edge on the floor slab. There we have drag elements on selection. What this does is it allows you to dragon element without selecting it, so you just have to click and hold on. You can drag it. If it's turned off, you have to click it to select it, and then you can drag it. The next displays the background processes, so if anything is happening in the background, it will be displayed here. Next is the selection filter, with the selection filter wearable to highlight multiple elements, and we can and filter out things that we don't want to be included in not selection. We also have the context menu. We access that by right clicking. When we right click, it will open up the context menu. Andi. I will just displace some various options. It also depends on what's currently selected. So if I select the wall and then right click, you'll notice I get a different variation off options. 7. 1.6 Navigating the Drawing Area: The main area here is known as the drawing area. This is where we're going to create our model. In order to navigate this model, we use our palm on zoom to pan the drawing, which means basically grabbing it and moving it left to right. We'll click on hold in the wheel. Once we click and holding the wheel, you'll see the pound symbol. We then move the mouse left right up and down and were able to pan the view to zoom with a scroll, the wheel in and out, in and out. If you zoom out too far, just double click on the wheel that will zoom extents so everything will be centralized. We go over to our three d view, so open the quick access will select the default three view to navigate a three D view. It's the same rule. Click and hold in the wheel as well. We can scroll the wheel to zoom in and out in orderto orbit. The view we need to hold in shift hold in the scroll wheel, and then we can move the cursor toe orbit around an object to make the object centralized. When we orbit of who selected and then orbit in the top right? We have the View Cube, which is another way that we can navigate the view so we can either click and select. If you cube itself, we can also rotate the view as well. I'll go back now to my level zero, and I will just create a couple of additional wells. So we have to selection methods. We have our Windows selection on a crossing selection, a Windows selection If you start from the top left, click on hold in the mouse. If I drag my cursor over, we've just created our windows selection so you can see the solid gray line. So if I wanted to select this wall, the wall only becomes selected ones. It's entirely inside my selection window. Same with the other walls. You can see that they don't become highlighted in blue until they're entirely inside the window. I'm press escape to do select second selection method is called a crossing selection, so getting to the bottom right hand corner moving up to the top left. The difference between the two is the object just needs to touch the crossing window to become selected, so the Windows selection, the object must be entirely inside the window on the crossing selection. The object only needs to touch off the crossing selection. 8. 1.7 Contextual Tab: Next, we have what's known as the contextual tab. The contextual tabal Onley appear when you select a tool, so as an example, if I select my wall to will notice we're on the architectural tab, we have the architectural ribbon. So when I select my wall, too, you'll notice that the tab will change. We're now on what is known as the green contextual top so it says, modify dash place wall. So every time we select a certain to or component, the actions which we can carry out with that tool will be displayed. So when we're creating a wall were shown the draw panel, which shows various methods with which we can draw a wall, as well as the contextual tab on the contextual panel. We'll also get on options bar. So again, this options bar is specific to the wall, and if we were to change the tool, the options would vary for that too, so double escaped to finish. If I then select door contextual tab will appear, The two panels in which I can use for that door only appear as well as the options bar for that door. So this process is the same for every tool. And you'll notice that as we're progressing in the in the project, this will repeat again and again. 9. 1.8 Terminology: most of the terms used to identify objects and rabbit are common industry standard terms. However, some terms are you need to rabbit understanding. The following terms is crucial to understanding the software in rev it. The project is the single database of information for your design. The building information model or what is known has been the project file contains all of the information for the building design, from the geometry to the construction data. This information includes components used to design the model views of the project on drawings off the design By using a single project file. Rabbit makes it easy for you toe alter the design have changes affected in all associated areas. Beat the plan, view, elevation section, views, schedules and so forth. Having only one file to track also makes it easier to manage the project. You build a river project by adding what I called elements Rev. It uses three types of elements in the project model elements which are doors, walls and stairs, data elements which are grids and levels or view specific elements which are tags. Texan dimensions elements of then organized into groups called categories. Now a category is a group of elements with similar properties and functionality. For example, all of the walls and rev it are grouped into the walls category. The same applies for our doors, windows and columns. Each category is in further organized into what are called families. Our family is simply a subgroup, which further source the elements in a category into a specific group based on a property. For example, the columns category is broken up into a round column family on a rectangular column family . Each family can have several types. A type can be a specific size of a family, such as a 450 millimeter round column or a 600 millimeter Rounds column. These columns will have identical type properties other than the dimensions, and consequently are grouped into the same private family. Each time you place an element into rabbit, you placed what's referred to as an instance off. The element instances are the actual items or known as individual elements that are placed into the project. I have specific locations in the building known as model instances, or on a drawing sheet known as annotation instances. So if you have 10 columns of the same type, and you want to change the properties of just one column, you can edit the properties for just that. One instance on the changes will only affect the individual element still confusing. Don't worry. Everything will make sense as we progress through the course on build on our Model. 10. 2.1 Introduction to Walls and Wall Panel: we're now going to look at the wall Tool. Walter was located in the architecture top within the builds panel. 1st 1 is our wall to so the wall till will create a non structural element in our model Will kick wants to open up the tool. And here you see, our green contextual top appears with their draw panel. Are options for that wall tool as well. The modification section is open. The first thing we're gonna look at is the draw panel. The drop panel will display our options of how which we can draw our wall itself with the option of drawing by a line. A rectangle we have are inscribed polygon or circumscribed polygon. Our circle start in radius, Arc Center and arc, Tangent and arc fill a dark pick lines on and pick faces. So depending on how you want to draw your wall, this is where you were. Then choose that option to draw by line. I know it's selected as its highlighted in blue when I come into the drawing area to get my wall started. If we refer them to the status bar, it's telling me to click to enter wall Start point to get started all simply left. Click once with the Mass. I will enter my start point for my wall. Well, then move my cursor in the direction which I want to draw on my wall. I can also at an angle. Why move my cursor Still, to specify the finish point again, I'll just left Click with the mouse, so to specify a length when I'm creating a wall when I start my wall and move the cursor in the direction in which I want my wall to be created, your notice that there is a blue dimension. This is known as a temporary dimension. So as I increased the length of the wall, you'll see that the dimension is well increases. So right now it is increasing in increments off 100. If I zoom in, those increments decreased down to 20 again. If I zoom in more those increments and are going up in fives. So that is one method off specifying a distance. We can also move the wall in the direction which we want to create it and then manually type in my distance on the keyboard off. 3000. I'm pressing. Enter so there we have The length of that wall is 3000. So that is a second option of how we can specify the length of a wall. The third option, which is what rev it is based around the first thing we'll do is just place the wall and then afterwards will come back on and revise it so we will place the wall. They will come back, selected, then using the temporary dimensions. That's where we will then revise that distance and change its length as well. If you wanted to add in an angle, well, just specify our start point at an angle again, roughly with the dimensions which we want. Then, once it placed, will come back, select the wall. Here we can change the distance on their we can change or I'm go. So this is the basics of how we're going to model our project. The next method of which we can draw a wall is by rectangle. To start, our rectangle will click once on the screen, moving the cursor away in the opposite direction. I'm clicking again on double escape. So as we have done before, the best method is to place the wall first, and then we'll come back and revise. Those dimensions will select one side. Our temper dimension appears, and we can adjust the length again, citing the top. We can then adjust the wit. This is the best method for modeling with rabbit. The next drawing method is the inscribed polygon. So first we will specify our start point, which essentially is thes center off our polygon, moving the cursor in the direction we want to go, then specifying our radius. So I've just move my cursor in the correct direction as well, moving up in the increments to arrive at 3000 and then I'll click to place that is now on inscribed polygon. Same method for the circumscribed. The difference between the two. If you'll see in the center of the circumscribed, there's an outline off a circle, so the circumscribed means that the polygon sits on the outer face off that circle, while the inscribed sits on the interface. Off that circle on the next drawing method is by circle, but we will click to specify the center point click again to specify our radius. Then afterwards we can come back to adjust. The rate is itself. You'll also notice that it's not a complete circle is actually two curves joined together so we can delete one out. Have a remaining curve. Next method is the start end radius. This will be creating an arc. So we'll specify our start and endpoint by clicking the mouse Ochlik ones for a start point , clicking again for our endpoint and then, lastly, will specify R Ark for radius. The next method is the center and arc, so we'll specify the center point, then the end point and then, lastly, the actual ark itself. The next method is the tangent end arc, so this creates an arc of the end of a line. Next is the fillets arc. This creates a round corner between two intersecting lines. Next method is pick lines. This is very useful to so as an example, I'm going to draw some model line. So in the architecture top, there's my model line. Gonna draw a few lines, then with the pick lines, too, then simply have to select the line for the wall to then be attached to it. This is very useful when we import CAD files will simply use the PICC line tool to attach it to the lines well, quite quickly. Build up our model. Lastly, is pick faces. The pick faces method applies when we create a conceptual mass. We can then apply a wall to that face. When we're modeling a project, we are presented with multiple modeling AIDS. These age will appear on almost all of the components, which we will use. So if I draw my first wall on draw another wall above it, first thing we'll get is our temporary vertical dimension. So you'll see that there's a dashed blue line that is telling me that that wall, when I started will be snapped directly above it. I can also use the temper dimension to specify the distance before I've even started. So Click wants to start move my curse in the direction on again. I'm presented with that vertical dimension on Click. So now I know that both of those walls are started the same point as well. Have the same length wanted a place of our then select one of the walls. Not only am I presented with the temper dimension to change the length, I can also change its position relative to the closest component, which is the wall below. So it's currently 2500 between each of those location lines so I can increase that or decreases well. We have the grips, which I can click and drag to extend at length. I can also add an angle with those grips as well as the temporal dimension. Hello, Does another dimension symbol, if selected, will make that temper dimension into a permanent, to mention to then remove it will selected until leaders, I deleted it using the delete key on the keyboard. So another feature is this flipping out? So our location line is currently set to the interior face so I can flip it, using these arrows across that location line with the temporal dimension on the right hand side, it has to grips as well, so this temper dimension is currently set to the internal face. If I wanted to change the position of that's temper dimension, I will click and drag it. Once the face becomes highlighted in blue, I can then let go of the mouse for the temper dimension to change again. Click and drag the grip until I see the highlighted do line on, then let go 11. 2.2 Wall Options Bar: Next, we will look into the walled option bar in conjunction with using the drawing panel here. We must also make changes in the options bar. When we're drawing the wall, we want to constrain it to certain levels. As we're currently drawing on, Level zero are based constraint for our wall will be level zero. We must then specify which level the wall is going to be constrained to. So at the moment, we only have level zero as our base constraint on a level one is our next level up. So to get a good view of what I'm about to do, I'm going to open open elevation view in the project browser. We have our elevations heading. If we click on the expansion button there we have our east elevation. So if we double click on that, that opens up our east elevation. Here we have our level zero, which we see in our floor plans under level warm again. It's in our floor plans in the project browser. So if we go back to our level zero, I would like to have both of those views open at the same time. So, in order to do that I'm going to type in W T. Which stands for window tile on. By doing that, it's going to open a both views on the screen. So type in wt here on the left hand side, we have our four plan level zero. On the right hand side, we have our east elevation. So making sure that our level zero is active by simply clicking on the tile. Well, now go back to the wall too. I'm going to be using my job. I line from the drop panel. I'm now getting onto the options bar. So the first option here it says height. It may say depth on yours, but if I hit the drop down arrow, we can go between the two. So whether we draw by Heitor by depth simply means that as we're drawing currently on level zero. So there's our level zero. If I have height selected by base level will be constraint to level zero. So my wall will go above level zero on connect to level one. If I change over to depth, my wall will be constrained that level zero on go below my level zero. So that's the difference between the height on the depth Next ones we have specified that we're gonna use height. Well, then select the next option, which is where we want to constrain it to. So we're currently on level zero. So our next level is level one. So if we constrain it to level one, I'm drawn our wall there you will see on the right outside in our east elevation, our walls based constraint is level zero on its top. Constraint is level one when we constrain this wall. If I go to my east elevation and select my level on a five, change the level the wall because it's been constrained to that level, it will move with the level. If I select unconnected, I'm then able to specify a height. If I give this a height of 4000 draw on my wall, you're noticed that on the east elevation that there is my wall based constraint Nevil zero unconnected with a height off 4000. So if I change my 1st 4 level because the wall is not constrained to that level, the height doesn't change. So now we just want to have our level zero open. So if we double talk on the top of the window tile. Bring us back into a level zero for the next option, which is the location line. I'm going to change my detail level toe medium. So come down here to the view controls and select medium, so our next option is the location line. If we hit the drop down arrow, you can see we have six different options with the first, which is the wall centerline to zoom in, using my scroll wheel when I click to start on, move my cursor in the direction I want to draw on my wall, you'll notice. In the center there's a dashed light blue line that is my location line on as it set towards centerline, you'll notice it's the center point off that wall. It's also represented by the blue grips either side. So if I change it to finish face exterior when I draw my wall, the dashed line is on the outer face off my wall again, represented by the blue grips either side as well. We have finished face interior, so there's are dashed blue line on. The interface is running along the plasterboard of the wall again blue grips Either side the other options which we have our core centerline, core face, exterior, encore face interior. What they're referring to as the core is when we create a wall, we must specify what the core off that wall is. The core is generally the structural part off your component. So the block work here would be the Corp off our wall to show you how that's represented. I'm going to select it. I'm gonna go to edit type on, edit the structure. I'm show preview. Don't worry about what I've just done. We're going to a lot more detail about this in a later video. But for now, I'm just going to show you this as a small preview. So you have a better understanding about what a core boundary is. So here is a section view of the wall which has been created. There's our brickwork, which is represented here. Next is the insulation. There's our concrete block. Andi are plasterboard finish and you notice on the either side off our concrete block. We have our core boundaries. So this here is our exterior core boundary this blue line here and here's our internal core boundary which is this blue line here. So the purpose off creating the core boundaries, which is when we have two intersecting walls. You noticed that the block work joins together ignoring the brickwork so the block work will cut right through the brick as well as the insulation. So all components have been created in this manner. So when we go to draw a wall when we change our location line to the core centerline, when I place my wall, you notice that the dashed blue line is in the center point of that block work. So it's in between those two core points and we have core face exterior again. When I draw the wall, you notice my location. I'm is on the external face of the block work. We have the internal face of the block work. Our next option is chain. When we draw by line having the chain feature turned on when we click our start point and then are finished, point will automatically start a new line segment. So this is known as a chain. If I turned chain off when I draw a line segment, that is a singular line segment on it will not continue as a change. Next option is the offset. We're gonna change my location line to finish face interior. So when I draw my wall, that dashed line is on the face of the plasterboard when I attach an offset. So what change my offset to 1000. Then when I draw my wall, you're noticed that there's my dashed blue line, which would be on the face of the plasterboard on my wall is now off, set up by 1000. If the wall is in the incorrect location and you wanted to flip it to the other side of the location line, press the space bar to flip the wall to the other side of the location. Mind next is the radius, So when it's turned on, we have a radius specified. When we draw two intersecting walls, it will generate a radius between those two intersecting walls. Andi, lastly, is join status, so when we draw two intersecting walls, they'll automatically join on the core. Boundaries will meet if we have joined starters on disallow. When we do the same, the walls do not join, so the core boundaries do not meet. If you want to the walls to join. Simply select the wall on your notice. This symbol here, that symbol is your joint symbol. So once you click on that, the walls will then join together. 12. 2.3 Wall Properties palette: Now we're going to look over the properties off a wall so we will select our wall to when we can look here in the Properties section. The first thing we see is the type selector. So with the arrow, this is where we will select the type of wallop which we want to draw, So there's lots of different variations in here that are provided to us by auto desk. You will be creating your own wall types in the future, but as a good basis and a good start point, it's always it's great to get to know the wall types provided by auto desk. So if we select the wall exterior one or two brick 50 air cavity, 45 insulation, 100 block on 12 plasterboard, then we can draw a wall with rev it. Once you've drawn the wall, we can always go back and revise it and change the type that we've drawn. So if we simply selected again it the type selector on, we can change the type thought any point throughout our modelling process, we can change the wall type once we have the wall selected, the properties pilot will then take on the properties off that wall, so the first heading is the constraints. Our 1st 1 is the location line, so it's currently set to finish face interior. So now we have a better understanding of what they are, so we're up to change that now. If needs be, you then have our base constraint, which is set to level zero. So again, if I open up our east elevation, you'll see our base constraint. Level zero. It's on level zero. The next option is based. Offset is set to zero, so it's sitting on level zero. We can added an offset. So if I add in 200 you'll see that our wall has offset up level zero by 200. Bring that back to zero. When we make a change in the properties pilot, the effects will not take place until we either press supply or move the cursor into the drawing. The reason is that we can make multiple changes in the properties pilot before everything takes effect. It was a quick way of doing things because if we were to do multiple things on the model was updating each time, it will delay the process so next is the top constraint, which is currently set unconnected. Here we can select it and reverted back to level one again, moving my cursor into the model. You'll see the wall will not be constrained to level one again. We have an offset so I can add enough set of 200 now offset above 200. If I got in a negative figure, it will go below the line. Next is the dimensions heading, so it will give us a length figure as well as the area on volume off that wall. 13. 3.1 Align, Offset, Mirror: So now we're gonna look at some different types of modification tools. There's two ways that we can access this. We can either go straight to the modified top of the top on in here. We have a modification panel or when we have placed one element into the drawing when we selected the modified top automatically appears. So the 1st 2 we're gonna look at is the align tool. What I'm going to do is just quickly place a component back in the architecture top stick with the 1st 1 that appears here, which is a furniture desk. Just place it into the drawing. I'm then going to place another components just above it, and I'm just scrolling in with the mouse wheel to zoom in. Now that we have two components place, I'm simply going to use the online tool to align the top table to the position of the bottom table so we'll select the top table and you'll notice that the modify contextual tab will appear. Then here's a modified panel first, still is the aligned to So select my align tool, select my point of reference and then select the line I want to align it to on double escape to finish. Okay, so next I'm gonna go over the offset till for this, I'm going to place a wall like so and to access the officer to it again. I can either select my wall or go to modify top. Quickest way again is to simply select the wall. Modified panel will appear. And here is my offset to. So when I select the two in my options bar here as well specified the distance, it's currently set to 1000. So leave it at that. When I condemned to the wall, You see, I get the temporary line to the right. If I move my cursor to the left on side of the wall, you'll see it will get my temporary line to the left. That's just showing little preview where where the world will be offset to. So if I click on the right hand side of the wall, offset my wall by 1000 across, so I'm gonna delete those additional walls next. I want to use the mirror. Until so we have two different mirroring tools. The first is mirrored by pick access. What that does is we will select our component on. We'll pick and access for two mirror across to. So select our desk. Select out, mirroring by pick access to select the wall, and you will see that there is a dashed blue line that's running it right down the wall centerline. I selected my desk full mirror across the axis for the second mirroring tool mirrored by draw access. I select my component Select Mir Draw access instead of now picking the axis. I have to draw my access off reflection, so that's just by clicking one's to start. I know you'll see. I got my dash. Do lines like another drop straight down at 90 degrees? Or I can draw on angle like Greece up to, say 45 degree angle. You see, my desk has never offset across that axis of reflection by 45 degrees. 14. 3.2 Move, Copy, Rotate, Trim Extend: earlier on, I showed you how to use the drag feature by selecting a component. You'll notice that the cursor now because has the drag symbol so I could drag the desk. This isn't very accurate, so, to be more accurate will use the moved to itself. So to use the move to again will select our component. Select the move to in the Options Bar. Here we have three different options, which are covered in a few months. But to get us started, we will just click for a start point, move the cursor in the direction we want to go. We can also specify an angle, and we can physically type in a distance as well. I'm click to place. If I wanted to be more accurate and where I place that component again, I'll have it selected. Select the move to and from my start point. If I snap to the corner of the desk, I can move the desk no more accurately again looking for them a snap point on the edge of the desk. So when moving again, we have the couple of options here. First is constrained. If you're familiar with auto car, that simply Ortho mode. So when I moved the desk, I will only be able to move it in zero degrees 90 1 80 or to 70. So I'm constrained to those angles. So next, with the move to waas, the disjointed. So what this means is for an example, if I touch and join a wall to the current war here. So he says, they're joined together. If I was to select it and try to move that I was expanded or I move it open position. But again, it's still joined to the original wall. So if I wanted to move my new wall by itself, I would select disjointed, so select destroying. Click on, Move on there now separate last. See? It's not highlighted at the moment, but the last one is multiple. In some occasions when you move something, it's done. Once. If you wanted to move something multiple times, you'd select that, and then you have to move that object multiple times. So next is the copy to so again will select my desk. This here is a copy tool selected. I'm here again. I've got my three options constrained. This joint is not highlighted, but multiple is so once the tourist selected are then collect from my start point click again from my endpoint and I've copied my object across. If I wanted to copy something across multiple times, select my copy too. Turn on multiple and I can now copy multiple times. And we're aware of what constrained means were copying at zero degrees 91 80 to 70 again if we wanted to copy something with more accuracy Selector copy till selective base point and select are finished point get into snapping from one edge to the other. Next is the rotates tool. So again selecting the component. Well, here we have the rotate to So once I selected to my point of rotation automatically will go to the center point off the components. So I'm first going to show you how to be confused this one, And then I'll show you how we can place it where we wanted to be. So they start ready of rotation will appear, which is this line here. So that's where we would think to start our ray of rotation. So with one click or places, I can then move my cursor to place the Endre off rotation. This is where I will specify the angle to rotate again. We could just follow the input on the screen, or we could manually type it in. I'm clicking to finish. I'm just going to on do so again, selecting the desk, using the rotates to. So if we didn't want the ray of rotation to start in the center point, we can move that point. We have a couple of different ways we can do it in the options bar. We can go and click on place. We can also come down to the grip, click and drag it to a new location. We can also click on Space Bar on, then specify the new point once we place our point. It's then again the same case off specifying the start point, all in the cross around, clicking again to specify the rotation. Okay, so I'm gonna just panned down to the lower half to get some more space. I'm going to draw in some walls. In this scenario, here we have two walls not joining. Instead of clicking, using the grip to drag up on extended T, join them, we can use our trim on extend so we can select with lower wall on in the modified panel. Here we have our trim on extend. So by selecting this to, we'll be able to extend this mall up on trim away this excess piece. So it's the opposite if you're familiar with card. So with rabbit, we select the walls we want to keep. So again, I'll select the wall. Use my Truman extend on, select the walls I want to keep. If I simply wanted to extend up the lower wall will select the wall. And here we have two other futures we have Truman extend. A single element will select the wall that I want my lower wall to extend to and then the wall that I want to extend. Copy this over. Also like the Truman extend multiple elements. Well, then select the wall. I want my lower walls to extend to, and then the walls that I want to extend. And then, if I wanted to trim or that excess piece, use my Truman extend like so 15. 3.3 Split element, Pin, Array, Scale, Delete: next, we have our split element to so with this wall. If I wanted to spend it up into specific segments, I do use my split elements still, So select split element. And then you noticed my cursor is now a little spread element to, and then I can simply click on the wall to spend it up into specific elements I could then selective and delete. There is a quicker way of doing this, of course, so I'll just undo what I've done when I select my split elements to in the options Bar. If I tick on delete inner segment now, when I place my segments, the intersection deletes beside that. We have split with Gap, where we then in the options bar, specified a gap entering 100 millimeters for an example. Every time I click, it will automatically generate 100 millimeter gap between those elements. Next, we have little pins. So if I'm happy with the position off my walls, and I didn't want them to move because it's quite easy to accidentally click and drag an element away. So what we can do is we can pin them in place of the camp removed so a quick way to pin everything is to use my object selection and then selecting the pin tool. I don't notice. Each segment now has its own little pin. So when I click and tried to drag my camp so on payments, quite simply clicking on that little pin, then I can just on then I can reap in. So I'm going toe on pain when I've drawn to move on. Next, we'll look at the delete, too, so it's a little red X. So this remove any little element that we don't want in the project. So select my tool, selecting the element on pressing enter. We also have the option selected. Easy to leave keys on the keyboard. So again, within this highlight selected Tilly key on the keyboard. Next, we're gonna look at the array tool going to come up, drag one of the desks away from a select the desk, select the array to First, we select the type off array, whether it be a linear arraign or a radio array. Do you want them to remain grouped and associate with each other? How many do you want to be involved in that array? Next is how we start the right, Whether we start by placing the second component or the last component. I'm want to place the second component, then the array will continue on. After that. If we place the last component, everything will be arrayed insect to that again. We can constrain them if we need to be, so we'll do a quick example here. Find it up the array to 10. First, I'm going to use the move to second. So with this, I just click on, Move my desk into the second position that I want my desks to be. And then after that, you'll see it will array to a total of 10. I have the final option off increasing or deep decreasing that here. So again, I'll use the Rachel all right up to 12. But this time I'll place the last death. So when I select the last desk off, click the desk, moving into the position being its last position, and then everything will array inset to that. So next for these scale, what I'm going to do just quickly dropped Whoa! And we have two different types of scale. So one us like my element selecting scale. We have graphical Andi New Miracle. So first I want to show you is the graphical scale. I'm going to first select each three of the walls. I do this by clicking on one wall, holding down control on selecting all three. Then I'll select scale remain graphical, so the graphical scaling requires three clicks. The first click determines the origin on the next two clicks to find scale vectors. So I want to increase the size of this opening in the wall. Some quick first click here determines my origin. Next we'll look again. You'll notice that the war will start to expand out. So given that final third click, which is my finished point, we notice that the war has increased in opening size. So next is the scale factor by numerical again, I'll select the wall. I want to scale selecting the scale till toggle over to numerical, so to scale numerically first, you gotta enter in your scale so we'll leave it up to and then we got to specify the origin off the scale. So stop point. So why used? This is my start point. We'll click on my wall has increased in distance by scale factor off to so I wouldn't want to double this again. Again, I can click on scale you miracle scale factor to on my origin on again. It's increased in then Why to So that's it for the modified panel. We will be incorporating these tools throughout the project. So if you're unsure of any of the tools, not to worry, because I will be going back over them again and again as we start to develop a project. 16. 4.1 Building Levels: Okay, so now we're going to start to develop our project first. The most important thing is we got to determine what our levels are and then our grid system. So first we're gonna look at levels to do so We'll go to our elevation view. So if we come up to project browser on the left hand side and there's our elevation heading will expand that, and we consider it east, north, south or west. It's not important, because again, we're working on one single project, So double click on East on by default will have level zero and level off zero on level one other level off 4000. We are working in metric. So this is 4000 millimeters. So first thing I'm gonna do is just select one of the levels. And then here we get a series of information, which is typical Teoh. Nearly all of the components I will be using. So there's some familiarity is here that when we were using the wall, So, for example, there's a temporary to mention we have some padlocks and so on. We'll go through each individual point now. So 1st 1 on the left hand side we have a little box with a tick on the right hand side. We have a box with nothing inside. So fight on tick, you notice that the bubble disappears. If I take on the right inside, the bubble will reappear. So it's just to change the position of the bubble from left to right. Next. This here is the actual elevation bubble itself. This is just a default symbol has been provided by auto desk. You can, of course, create your own. Implement them to your own drawings. Next is a open grip, so it's an open blue circle there. If you click and drag, we can extend our levels so they can extend them out or attract. You'll also notice that there's a dashed blue line, which is a temporary vertical dimension so all of the levels are locked onto each other. If we wanted to move one level by itself without being locked, dealers will simply click on the padlock. It's not unlocked from the lower level, and I can now move it freely. So market back to level zero. Quite simply, click the grip, move it over so I get that temporary virtual dimension once that appears. I'll let go on. It's been padlocked again, another locked together. Next we have where we have never won. This is the name off our level. Below that, there were 4000. That's the actual level itself. The dusty line here is the actual level line. Again. We're the similar artist on the left inside, so there's are open gripper padlock, so to adjust the level first, I'll select the level I want to move. I have two options. I can either select the level texts where we have 4000. I can then enter in a new level, pressing Enter or I can use the temporary dimension Select. I'm bringing back up to 4000 again. There's another option again. Once I select the level, you'll notice my properties part of changes and takes on the properties of the level in there as well. I can change the elevation. We'll select 4000. Bring it back to 3000 for the properties to take effect of that level would either come down to press supply or simply move the cursor into the drawing. And then those changes will take effect. So to create a new level, I'll just press escape to come back out of that. So we've got nothing selected. I'm gonna pan up in my architecture tab down the very anti of the second last panel in there, we have our level. We'll select my level two. You'll see The contextual top appears with our modification as our draw panel. So these air different ways that we can place our level in the options bar Here we have, Ah, a couple of options that I'll go over in a few moments just to get us started first, all line up with the vertical to temporary vertical dimension. Click wants to start move my cursor to the next point game when I see that temperate vertical dimension click again to place on escape to finish So because I pressed escape once and still inside the level tools off a press escape again I'm back into the main model . So to make changes to this level, I'll click on the level I want my bubbles to be on the same side So will come to my show High double box air ticket on on the left Take it off on the right. Okay, so I'm gonna pan up again, so I won't go into a bit more detail off placing the level so again, pressing escaped from back. The main model clicking on my Level two and in here I'll go over my options. So the very 1st 1 there is make plan view, and that's turned on right now. So when I place my level to hear, if you come over to the project browser under the floor plans, we have level zero. Never one on Now we have Level two. So if I turn out off on place another level, Level three again, I'll just turn my balls on. Level three has been created. You'll see in the project browser on the floor plans. It doesn't exist as well. Your notice that it's now black when we create a level on its blue. It means that it's an active floor plan. When it's black. It is not an active floor plan, so the reason that we would create these levels would be safe for roof ridges, ive details and so on so we can place levels in the drawing for us too attached to, but we won't generate floor plans. There's other ways that we can do that as well. So I'm gonna delete level three Aiken. Create a new level without creating a floor plan by simply selecting the level two. Using the copy tool on copying up again, we get level for I don't notice that it's black, so the level hasn't been created. So if I use a copy tool on copier level, it will not automatically be a floor plan. If I wanted to copy my Level two up and to make it a floor plan, I can select it in the modify sexually of create on There's Create Similar. So this works with all components, not just level. So if we wanted to create a similar wall, create a similar door floor, anything that we put into the project, we simply selected select a great, similar tool. And then we can places and you'll notice it's turned blue on my floor plan. It's now level five selected until leads. So we got I'm gonna place another level when we have the make plan View turned on will select the Options bar here. Andi, it's just give me the option off. What type of plan views do I want to be created so by default will always have seating plan , floor plan and structural plan. You can determine if you want those to be selected or not. So press OK now If I place my new level, you know my floor plans. We have level six, my ceiling plans. We have level six on my structural plans. We have a level six as well. There's level two that we created earlier. So if you're creating a new level, you can If you only wanted one of the other you can simply to select under lead. No selecting delete level six as well when placing a level when we draw weaken out an offset. So if I have been on service 8000 when I drawn place, my level is offset below 2000 right now. So if I hit the space bar, it will be 1000 of both. Okay, So for our project, we're gonna have three different levels. Are ground floor level zero our first floor of level 3000 on a roof level at 6000. So first want to change our level heights. So level zero believe it. Zero level one will change to 3000 on level two will change to 6000. So if I select the level, we can almost like the text or the temperature mention. So obviously I'll make that 3000 has been have level three at 3000 plus 3000 will make 6000 or you can select the text 6000 and change it there. Next, we'll change our level text. So again, select level zero on three. Type in ground floor. When I press enter or click away from the text, I'll get this little pop up. Would you like to rename corresponding views? So if I press? Yes, my level zero in the project browser will change to be ground floor. If I select no Level zero Will will remain as level zero in the project browser but will change in the model. So I wanted to change in the project brother as well. So press guess No notice my floor plans and they're changed to ground floor. Do the same for level one. Changes to first floor like another press enter or click away again. I'll get the pop up pressing Yes, on for you Top will just make that roof one click away on Yes So in my model at the bottom of the ground for first court roof level. In my floor plans, though it's organized alphabetically. So first floors first, the ground floor and roof. So this isn't something I want to happen. So one little way around it is to change the name on adding a new miracle value at the front of the text. Someone aside in one. Yes, I want to change again first. Yes, Office three. Yes, so now in my project browser, my floor plans that organized how I want them to be. Then I can extend that all three together by using a grip on their all attached well when we're creating our levels. If we have one level on top of the other, for example, what I'll do is I'll just quickly copy this above. If my Texas overlaying another text, be it for whatever reason. What we can do is we can out in an elbow so we can read the text clearly on level seven. There. If I selected, we have that little symbol there, which is our elbow. So if I click little generating an elbow by default, it will always go down So what I can do is just grab that grip on, drag it up on any just its position even more. But under the seven, like so So the level itself doesn't actually changes. It's still 69 to 0, but just I've moved the bubble on text away from the roof level so I can read it clearly. Then, to remove the elbow. I'll come on the out of grip here on just pull it down until I feel it jump. When it does, almost let go on the elbow was removed, so just select that level seven on delete. So if we double click the wheel, it will zoom extents and bring our levels into the picture. 17. 4.2 Grid System: next, we're gonna add our grid system. So to do that, we'll go over to our ground floor plan. So back over to the project. Browser floor plans on double click on ground floor. So to place our grid, it's in the architecture tub again, down the very end in the DOT on panel. So we just placed our level the middle that is our grid. So I clicked. Activated, too, on the contextual teibel appear. So this is a couple of methods of how we can place it by the by straight line. We need to start and radius center and arc PICC line as well when were placing, and we cannot an offset. So the place the grit again. It's like placing a level click wants to start drag the cursor on click again to finish press escape just to come out of the drawer. Function escape again to finish the grid. So if I select my grid, you notice again. We have the same features as the levels. So we have Our tick box is there for a bubble. The open grip there to extend on. There's the elbow with the grid again. Oh, bead by defaults we'll start with one. When I placed my next level will automatically be to before this project, we're gonna start with vertical grids alphabetically. So if we just select the text by clicking on our text will appear like so type in a again pressing and to the finish I'm escape. Once I've done that, I go back to the grid click. So right now, I've just been prompted to save project. So when rev it rare to specify how often we want the software to prompt us to save, I have set mind to 30 minutes so every 30 minutes or get the seal display screen and it's gonna prompt me to save. So what does select save And again I'm just gonna place my grid so lining up with the end So I get that temporary, brittle dimension quick to start on click to finish It's automatically named itself Be So press escape So again when I when I select be you'll see I got my temperature mentions my padlock my grip again So all same features. So what I'm going to do now is going to start to place all of the horizontal grid lines where I'm getting this information from is from the PdF 001 grid system in there. I've given you all of the dimensions between each one of the grid lines. So first up between A and B, it's 2000. So to change the distance between A and B, I want to move grid line be so I select Grid Landy and you'll see that on my temper dimensions. It's 39 hundreds. Or select apps and change it to 2000 like another press escape on the keyboard or just click away on the screen. So next I'm gonna place grid line, see. So again, I'll click on grid Click to place click to finish I'm escape. So again I click on the grid used the temper dimensions here to enter in 6000 or to speed things up. Your notice between C and D is 3600. So when I go click on grid, I'll hover over to get my vertical dimension. I can move my cursor up until I see 3600 displayed in a temple to mention. So when I click to start in place, I know that that is no place accurately a 3600 again Next between detainees 4400. So same method moving the cursor until they get 4400. I think on cook again to finish again. Last is between E and F is 8000 like thank you. So there we have eight f at the moment. Ignore the elevation bubbles. We can move them later. Next, we're gonna move on to grid lines. 123 and four. So same processes before click on grid picked to start Quick to finish. You'll notice it will automatically take on G but we want to relabel them as 1234 So we'll select g text. Enter one. And now every time you place a new grid or water might be 23 and four. So great line between one and two of 7000. So again, just leaving my curse or quality that comes to 7000. Click to place Nexus 8000 on 7200 because I'm zoomed out quite a lot. It's in my temperature. Mentors is jumping from 7000 to 8000. So how I can go into increments of 100 zoom in. You can see the temper dimensions are now going in increments off 100. So 7200 is what I'm looking for. Victor, start click to finish on your notice again. My bubbles are 1234 So next I'm gonna just move those elevation bubbles out off the way. So I got two options. Oh, click. Once it's highlighted, I'll get the drag symbol and then I'll just click and drag it away. You can drag you can also, with the arrow keys on the keyboard to adjust the position double tap on the wheel to zoom extents so that we just have to extend out our horizontal grid line on the virtual. Well, we could just extended slightly again. This is just a position of the bubble. 18. 5.1 Structural Column: now that we have our grid, when I'm gonna apply some structural columns to the grid. So to do that, we're in the architecture top. We're in here in the builds panel on There is our column. So if I click and select my column, you'll see that the contextual tab appears my various different methods of placing them again. I have my options bar for further adjustments. So first off is my placement panel, so I can have them either vertical place or at a slant. If we wanted to do the multiple times. If we select upgrade on selected, the grid itself will place a column on each intersection or we also have at columns. So if you were to place architectural columns, which will do in a few moments, you can also play structure columns at those points. Next is tag on placement. So every time you place a column, a tiger will automatically appear you will become more familiar tags as we work our way through the project in the options bar there we have. If we take on, we can rotate the column after replace it, and then the same with our walls on next is the constraints. So if we have depth when we place a column, it will start on a ground floor level and it will go below so it will go into our basement level. If I change out to life now, my column will be placed at the ground level and we'll go above next is just specifying those constraints are now. You can see our floor level so we have our ground floor for us. For roof on the few sect unconnected weaken. Specify a height, so we'll specify our height at first floor. Andi Next. If you open up the pdf 002 column layout in there, we'll show you the position off each of the columns, so the first position is a to So if I can't, there's my A grid becomes highlighted in blue on to also become blue. So when both of them are highlighted in blue, when I click, my column will automatically be centered at that intersection. Same again for the next one. We have a three again, both off. Those grid lines are highlighted in blue so quick and it is centered. B. We have one to three see is one to three four. De is one to three. He is to three four on F is three on Day four. Double escape to finish. Best way to view this is we will go on toggle over two or three D view now, just to see what we've done on the quickest and easiest way to do that is to go to the quick access to a bar at the top, select the three D house, and that will generate our three D view. So to navigate the three D view is again we'll click and hold the wheel to pawn scroll in and out with the wheel, so move the wheel in and out on If we want to orbit, hold down shift hold in the wheel time we can orbit. If you wanted to orbit around a particular spot, select a component. Hold on shift holding the wheel on. Now, everything will orbit around component. So there's our columns. So to come out of the three d view, you've got two options. We can close down that windows by clicking clothes, or we can just go back double clicking on the ground floor 19. 5.2 Architectural Columns: Next we will place architectural columns. So the difference between the structure columns on the architectural columns So the structural column adds a vertical load bearing element to the building model. Well, the architectural columns are purely for aesthetics, so they will not be included in any loading calculations to select. The architectural column will come back to architecture. Town builds panel We have our column to When there's a little arrow underneath, we'll click on the arrow. First is the structure column, which we've just used next is the architectural, So we'll select that again. You'll see the contextual tabal appear so that the top changes green. A few options we can use. I won't go into detail about. They are just get rid. Of course, cover this in the course. Next is the options bar. Again, we can wrote it after placement. How we wanted to be constrained on room bounding is something we'll cover again later on course. But with the structure of column, What we did is we used the column, which has been provided to us by auto desk. So, like the default one in the type selector. What we want to do is you want to change our architectural column, as you see here in the type selector on the left hand side, in the properties palette, it's currently set to columns rectangular for 50 by 600 millimeters. I want to change that to 600 by 600 and how we do that is will select the type selector, and in there we have three different types, so we have our 4 50 by 4 50 or 50 by 606 106 100. So when you select that, I'm never going to just place that architecture column over the points at which the structural columns were so again. Same process. Once both grid lines become holiday blue, were quick to place again. Refer to pdf 002 column layout for those positions. And if you wanted to get a better look at what you've drawn, click on a three D view again and there's our architectural columns. No close up down. So with the architectural columns, they're just a blank canvas. So what that means is when we attach a wall to that architectural column, that architectural column takes on the properties of whatever wall abuts to that. So later on, we're gonna draw our external wall around those columns. When we hit off, it will automatically take on the property so it will turn into a block. Plasterboard, brickwork. Whatever way, put to it. So it saves us time detail ing around every single structural column in the project. 20. 5.3 Placing External Walls: Now that we have all of the architectural on structural columns place on the grid whenever to draw our external wall. So to follow along, if you open a pdf 003 external walls. So for goto our wall to again on being prompted to save. So yes, I'm going to save So in my type selector, what I'm going to do now is change the type. So by default, I'm cut the external wall. 102 mil brickwork 75 insulation 100 block 12 plasterboard. When we're gonna be using today is the wall exterior one or two brick 50 air, which is our cavity 45 insulation, 100 block on 12 plasterboard. So click to select. So I'm gonna draw our wall today. We're gonna be using our line in the options bar. We're going to specify are constraints under haIf constrain them to the first floor level. We're going to specify a location nine as the core face exterior. So to briefly run over the course of our wall and to show you where our core centerline is our core face exterior under interior. What I'll do is I'll quickly just open up at a browser. This is a little cover letter on the course, But just to give you an idea, where are cores are? So here's our makeup of the wall on there, you see, is our course on our core band. AIDS are positioned around our main structure, which is our concrete block so that they're highlighted. And blues are concrete block, which is the main structural element off our wall. So a bull that we have our external or exterior face for a core boundary, which is that blue line on our interior core boundary, which is that blonde again? So we're going to specify a wall location on to be the outer face of that block work, which would be this section here going to change our location. Line to wall face Exterior? Yes. I wanted to be in a chain. I don't have any offset. No radius. And yes, I want them to join. So to get started, I'm gonna come down to grid line F three, the types to the outer corner off that architectural column Click wants to start. If I move my cursor up your skirt brickwork is on the left inside the block work is on the right hand side off my core boundary. If I was to go around the right hand side of the building, you can see that it's been mirrored across on that. My blockers on the outside of the building, my brick is on the inside. If I wanted to run this way around the building, I could just simply press space bar to flip it, go back and run around in a clockwise manner. So coming up on just clicking on the bottom left hand corner off this column again, bottom left hand corner when I get that square symbol that that is my snap symbol. So I know that I'm attaching to the edge. So I'm gonna run right up to grid line to leaving the columns on the left hand side. For now, me across down. Just follow what's on the pdf. So when I come to the end, when I could do is just simply come up to the wall. Want to get that dashed line to click in place, and they'll automatically join and now, over to the left on side of the building. I can just click on the other side of that column again place and you'll see that they will automatically join together on again. The block work will run straight through the brickwork going to the next boundary, which is the block again against something that will repeat again and again. And there's our external walls place again. We can use a three D view to check it out. 21. 5.4 Placing Internal Walls: next one out in our internal walls for goto our wall to we can just go to our type selector and change the type. So if we just scroll down to wall partition 12 plasterboard 70 mil stud on 12 plasterboard again If you now open up the pdf 004 internal walls, you can follow along. First off, I'm gonna go to my grid line. See? My drawing matter will be byline constrained to hide. First floor my location on. I'm gonna leave on for wall centerline For now, Cheney ists are going to go from the center. Point off that column directly across and touched to the other face. As you can see the pdf, all of those walls are equally spaced between each other. So what we can do is just hover over the edge of that wall will get a triangle which is our midpoint on Same again much. We get the triangle. It's the midpoint. So they're all equally spaced. Go to the right hand side. So with the rev it what we want to do is we just want a place, everything first on afterwards, we can come back on position it with more accuracy. So I'm just gonna draw in roughly where I think everything is. I think so. And then afterwards. Then I can go in and make sure that those dimensions are correct. So 1st 1 here, the distance from the face of that plasterboard on the X on the wall to the face of the plasterboard off the partition is 2100. So if I select my partition because I want to move my partition, if I said that the X on the wall of my external wall will move, so we'll select my partition, the temporal dimension will appear and you can see there. It's 2137.5, such with just its position. I'll select the text changed 2100 on press enter. This will here. Is that the Centrepoint? Same here. So these will see are 2000 down. So fights like my middle wall. You can see my temper. Dimension is 2302.5. If your temporal dimension is snapping to the column like so we can adjust its position. So with that blue grip are click drag and moving up to the face of the plasterboard on Let go. Now I can change the text to 2000 to change this wall down here. If I know enter 2000 here, it's going to move the wall. That's highlighted. So you got to make sure that you select the correct wall before you move it. So I'm gonna undo that. Now that we want to move this wall, I'll select this wall here. Now I'll change my temper. Dimension click away. So next want to do this nice curved wall here? So to do that, I'm just gonna again just roughly draw on the walls where I think they belong. There's another one there, so drawn those nice straight walls. Afterwards, we can add in those curves. So the first thing is the distance between the vertical partition on the external wall can see that set to 2,802,800 Succumbed to my temper dimensions. Change that to 2800 is the next one. To get that curd between the two walls, we go to our wall tool select fitted arc. Select the two walls. If we get that warning symbol, if you just go across to the other side. We can place it on. It will generate on the other side. Once it's placed, we can then select it on change. The radius, which is 2200. What is the same for the bottom? Select 12 Not so we generate those nice curves. So with our partitions on grid lines, see here we can see that the partition is cutting right into the brick. I'm going to the block. Work again. The reason for this is because of our wall boundaries. So the metal stud in between here has its own boundaries as well as our block work. So there, two boundaries connecting to each other. So the brick is completely ignored, as well as the plasterboard for our partition. So when in the real world this isn't gonna happen, we're not gonna have a metal stood cutting right to a brick. So what we can do is weaken. Disallow the joint off that wall on pull it back. So what we'll do is we'll select the wall on right click on the grip on their we have disallowed join, and then we'll just click and drag the grip away. Touch it to the face of the brickwork. This is a symbol. Here is the joining symbol. So if I ever wanted them to rejoin on this click and we'll rejoin. 22. 5.5 Using the Equality Constraints: Okay, so next we're going to place the architectural calls around the left hand side of the building. So we go to the build panel, dropped an hour of the column, will go to architectural. We go to the type selector, and so we only have three different types of choose from. So what we need to do is win to load in the other problems from the library. So this library, when we download the software, is automatically installed on your PC on all of these components aren't automatically in every single drawing because the file size would be too big. So there's an external library off all of different components that we will load in from to access that will click on the load family. We're in the green contextual tab off Our architectural column will set on low family, so this will open up our UK library on there. We have our columns solder on. In there. You can see a different types off columns that we can select when we're choosing today's the metal clad press open to bringing from the library into the project and then just click to place. Once we have one place we'll place a more accurate it again using the temper dimensions if you referred to the PdF 005 external columns. This is where you'll find the positions of each of the columns. So from the face we have about 1000 and from the lower face again, it's 1000. So against all I'm doing is clicking on the blue grip, dragging it down. So I wanted to be re select, changing to 1000 so sent to the center. It's 1000 to each face and you notice on the pdf will be four columns in total along the top half here. So it was. Now, click on the column. Use a copy, too. I'm gonna click above it just as my start point on having multiple selected every time I click our place. A new column now that have the four place what I'm going to do with human, too. Adjust the position off the last column, and as you'll see in the pdf, it's again. It's a meter away from each face, so this temperature mentioned here is latching on here, So what I'll do is click the Blue Grip, click and drag until I get the blue line on the accent or face on, let go When there is 1000 it should automatically be 1000 from years. Well, so I don't know what the position is between each of the columns, but with rabbit, I'm able to equally space. Um, anyway, so in rev it there's a feature that I'm able Teoh you, which is called the Quality Constraint. And I can use that feature two equally space the columns. So like How will do that is I'll use my aligned to mention tool. So we got to the quick access panel at the top. Select a line dimensions on because I want my dimension one to go along the horizontal axis . When I hover over the column, I've gotta pick up that vertical blue line. If I go for the horizontal blue line, I'm going to go down to make a vertical dimension one. So because I want to do a horizontal dimension run. I look for the vertical blue line on the center point, so quick ones to get my centrepoint click again for the next one, remaining in the dimension to like look again for the next CenterPoint look again for the next column. Once I've done all four, I'll move my cursor up to position, then to place the dimension run, just move away, making sure I'm no highlighting anything. Like if I click now, because that's blue on making new dimension. So I don't want to do that. So I'll just move my cursor away and click again when nothing is selected. And that's my dimension one placed giving me a dimensions between each of the columns. Now two equally spaced, Um, doesn't eq you with the red dash. If I click that little equally space, the columns now, we don't want this on our plans all the time, so what we can do is we can select it. Clicking the delete key by doing this will get a warning that dialogue box. It's just saying we have deleted the dimension one, But do we still want to remain constrained? I e. D. We wanted to remain equally spaced or not, so we can keep it constrained by pressing. Okay, well, we can click on unconstrained, which means that the columns are free to move now and they won't be equally spaced. So I want to keep them constrained. So press OK. Next, we'll do the vertical run. So on the vertical room we have a total of eight columns. So will select one. It was my copy tool again was confident. Age time. So I got one, too around eight. So next it's about positioning the last column correctly. So yes, it's Ah, meter from this face here, but it is 1900 from this face. So using the blue grip, just click and drive. Place it on the external face there. I can change that to 1900. And now that I have the position off the last one, I can use the same aligned to mention tool because I'm doing a vertical distance and I have to get a horizontal blue line. So there's my vertical. There's my horizontal again, just clicking. Once place using my wheel on the mess to pan on Once I've got the last one, just moving the dimensions in the correct position, moving the cursor away from any other objects over on Select Andi left. Click with the mouse, so I select you to mention one. There's a EQ you quick to place and all equally space. The columns again. Once I delete three dimensional, I get the warning dialog box again. Off press. OK, Next. I just need to copy down those three from above. So if I select one usually hold down the control key to select the other two, I can a copy priest. 23. 5.6 Placing the Ground Floor Slab: Now our project is starting to take shape. We have our levels are grids. You said our external walls, internal walls, Andi, some additional architectural columns. Next, we're going to create a floor at the ground floor level. So to get started again, we're in the architecture top to build panel. Here we have our floor to ever hit the drop down arrow. You'll see a couple of different types what we can use architectural, which is what we're going to use today. A structural is not something recover in this course on the other two as well. So simply just click on the icon itself. It will bring us into the great floor boundary you'll see again the contextual top changes first noticed in the first panel. There is our mold panel. We have a red X on a green tick, so this will appear with certain components that when we place any floors and roofs and so on. Basically, what this means is when we're finished, we have to either select the Red X to cancel what we've done or the green tick to continue into finish cover were happy with what we've drawn. You cannot move forward unless you select either one of those two. So that's very important to remember. Next we have the boundary line. And again there's our draw panel, which were familiar with by now again drawing byline rectangle circle and so on again, we have the pick lines. Onda. We now also have this new tool which is called a pick. Wald. It's best practice to use that the pick walls to because by using this to or we have to do is select each one of the walls to create our floor boundary on. What it will do is it will look for the boundary off the wall itself. So the floor will cut through the block, work and so on and go to the external face. This become more parent when, when we draw our floor, not cut a section to to see see that happen? They're in the options bar. We can create an offset on the extend inte wall into the core will have that takedown again . What? That is when we create the floor, it will extend in through the wall on attached to the core itself. So we're gonna do is gonna change over our floor type we have the type selector by default will have four different types to ground floors on to upper. So if we go for the first on the ground bearing slab having the pick walls tool active on, then we'll simply just click on the walls on escape wants to finish. So what we have John is our boundary line represented by that pink line. So the banjo on most contain a closed loop, represented the outside perimeter off the floor. It can also contain other closed loops, which to find openings in the floor. It is very important to remember, though, that we must have one single closed loop. So we kind of any additional lines or anything like that. I will show you that in a few moments. So as you see here, we have a single closed line running around. And then these three lines here are in fact, additional lines. So five press green tick to finish. I'll get a warning symbol here telling me that I cannot complete it because the lines cannot intersect each other. The highlighted lines are coming detected, so whatever it will do is will highlight the problem lines as orange so you can resume into right away to see where the problem is. So to fix the problem with this press, continue on. What we need to do is put out this intersection on. I will use the spread element tool for that sort select but element in the modified panel to save myself time. I'm going to click on Delete inner segment, and then when I hover over where I want to cut, you'll see out the curse of all kind of jump on attached to it. Once I can see that happen or just click wants to start click again. It has created the opening on Escape Wants to finish. Now we have one single closed loop, which one I press in Tick. The software is happy with that. We can continue on escape again to finish. So what for then further wanted to edit my floor. As you can see, when I hover over, I cannot select it. The reason being is down here in the selection modes, my select elements by face is turned off, so if I turn out on now, I can select the face off the floor. Wanted selected in my property section I can change the type I can change the constraint of I want. But I also have the option here off editing the boundary. So if I click on that back into the editor, if I zoom in, we can see the pink line running around the outside off the block work, which is a core face exterior. So if I wanted to change the location off that line, Aiken simply selected once on only with the pick worlds to Will I be given this flip arrows here. So I click on the flipping arrow. It will jump to the interface of the core boundary when I can hit the hours again to flip it back out. We can also adjust its position using the temporary mention there, So 100 pull up to the interface of the brickwork. So to bring it back, I could just click and drag back to the exterior face green tick to finish. So what I'm gonna do is turn off select elements by face, the reason being I can accidentally click on the floor slab which can get in the way. So if I turn up off 24. 5.7 Placing a boundary footpath: So next. What we're going to do is we're gonna place another floor slab. What? It will be our boundary path. So we're gonna create a footpath around the building. We are going to use the same floor slab as we've done for the inner part of the building. Later on, in the course, I'm gonna show you how we can change the properties off that floor slab. So just display a concrete slab. For now, though, we're gonna leave it as the default ground floor. Parents love so same process. We're going to click on the floor tool. This time, I'm going to use the PICC line. I'm gonna go around the outside off the building, and again, we have to remove this segment here. So we used the split element again having to elite inner segment turned on click Click. So that's the inner side of the footpath. We now have to draw the outer side to create a footpath. You can also open up the pdf 007 path. So the pas itself is gonna be an offset off two meters from the inner boundary. So if you use the offset tool in the modified panel we can change the offset. Number 2 2000 causing enter on. What I'm going to do is just simply hitting the top, right? Bottom on left. I'm not going to do each individual segment. The reason being I'm going to use my trim and extend to just tidy up those corners, just saving myself a bit of time. Now that we have the outer boundary drawn, we're gonna do a small fill it on the its upright on bottom, left hand corner of her path. So to do that, I'm just gonna go back to my draw panel. We're going to select the fill it arc. We can just select the two lines, but will automatically generate that. Fill it. We can try and get it to 5000 or we can simply click to place afterwards. Come back, select The curve changed to 5000. We can also select the fit by arc. Go to the options bar, turn on the radius, change to 5000. So now only selected to lines in the bottom left hand corner. A lot of monetary generator. So now we have are out of bounds. You, John, on our inner boundary, John just the press green take to finish. There's a footpath around the boundary looking good to your three D view, and you can pan around over to see what we've drawn again. You can select the outer for path on the inner floor. 25. 6.1 Placing Doors from the Type Selector: the next component. We're gonna look at our doors, so open the build panel beside wall. We have the door tool. So if we select our door tool again, you'll see our contextual teibel appear. You green top of the top. We have our panels. Here first is the mode, which is a load family again. That Lord family will just bring us into the library on a common drive. Modern place isn't something one of cover in this course on glasses the tag on placement. So every time we place a door, they will automatically tag each door, tagging something we'll cover later on. In this course, the options bar there is referring to are tags. So this is how we can manipulate our tags. So we go to our properties pilot first thing we have our type selector on by default, we have two doors loaded into the project. 1st 1 is an external door type. The second is an internal door type simply represented by E x t for external. On I N. T. For internal in the properties panel itself is just a basic information about the constraints. So the sill height off the door. We want to be 00 sold on our ground for level the construction type. What materials and finishes are on the tour We canal in some comments about that door itself. We'll go into a lot more detail about this later on. In our course here, we can also specify had height. So to get started, we're going to go to our type selector. We're going to select the 9 10 by 2110 door. So click moving to the drawing. I'm gonna place our first door here on grid line. See? So, as you see, my cursor has the morning symbol cause I cannot place a door randomly in the project, doors as well as windows must be hosted on a wall. Certain components must be hosted on certain other components. But when we put in lifestyle on beholds it and ceilings So if I hover my cursor over my wall, you see the door will appear find Move my cursor below the wall itself. You'll see the door. Handing will change on as well to place that if I go left and right, you'll see the temper Dimensions will change. So how close I want to be to the Jason partition. So give me a rabbit. The best thing to do is just place it first and come back afterwards too adjusted. So now that the door is placed, if I click again to select it, you'll see we have our temper dimensions. Both sides. Well, we have two different flipping hours. We can change hunting like so we're gonna place each of the doors 200 from the adjacent partition. If we wanted to do some minor adjustments to the door position, we can use our arrow keys. I'm just going left right on the arrow keys on the keyboard. To be more accurate, use those temper dimensions. So next we want to open up the 008 doors. Pdf publican start to place the door 9 10 by 2110. Around that project, they're represented by the number one. So we have two ways now we can go back to insert those doors. We cannot select the door usar create similar, or we can also use our door tool. And it's the last selected so we can just go in place best to just place the doors on. Then afterwards will come back on just their position. So once we have all of those 9 10 doors placed well, then just place a more I could do so. Yeah. 200. I want you to flip this store 200 again. So when I select this door on, I flip it. You'll notice the temper. Dimensions also flip. So to get the temperature mention that I want about just press escape, select the door again. I know my correct temper dimension will appear in the same for here. We can also select it. Use our mirror pick access. I'm flip it to the side. So now we have all of our 9 10 doors in the project. 26. 6.2 Loading Doors from the Library: next you'll see in the plan that we have two of the door types, a 15 10 by 2110 on a 14 10 by 2110. So if I go to the door tool type selector you'll see in the internal door types, they don't exist. Right now. What we need to do is we need to bring those doors in from our library. So to do that, we'll go to load family. Then you'll scroll down to our doors folder. We have four different sub folders as our door among Greece. So that is, our door knobs injures and so on. Next to the external doors, there's our internal door forward. So if we double click on the internal doors, if I select the top on, use the arrow keys, you can see the preview off the different types off doors that we have. If you don't have these in your library, it's probably best to look back and make sure that you have installed your library correctly because they should be there, wants you load in the UK library. So the door that I'm going to insert is a double door. So here we have got eight options. 1 to 8. You can choose any one of those. 1 to 8. The actual type itself is not important as long as it's a double door. So you have the option there to go from 1 to 8. I'm just gonna stick with one. Once we have the door selected, press open and you're now notice It's in my type selector. So I hit the drop down arrow. There's my doors. Internal, double one. I've got two different types. 15 10 in 18. 10. So I will select the 15. 10 on. If you refer to the pdf, they're represented by the number two. So wherever we have the number two is where we're gonna have those doors. We've got one here on one of the curve scape to finish. So this one here is 700 from the column on the other is just in the center 27. 6.3 Creating a new Door Type: so last. We just have that 14 10 by 2110 which is represented by number three. If I go back to the door to, you'll notice that we only the 15 10 and 18 10. So what we need to do is we need to edit the type of crater own door type. So on the 15 10 would have that selected on. What we're going to do is when a select edit type So when the property is pilot right now, we've just selected AR 15 10 door to create our own type. We're going to select edit type. So in here, the type properties off this door. I'm not gonna go into a lot of detail about this right now. We will cover this as we go to the course. But if we scroll down to the dimensions that there are the parameters of the door which you create when you when you build your own doors. So when there's the width at 15 10 now, we're not going to change the value off this door because we want to 15 10 to remain in the project as of 15 10. So what we need to do is we need to duplicate this. Give it a new name on That would be our own, that we can then change the values so we'll go over to the top right here. We have a duplicate select that will automatically by default give it to at the end. So we just selected to lead change it to a 14 10 by 2110 on press. OK, so now you see at the top here we have our family, which is our door, the internal double one, which is our door that we've selected. We've now just created a new type of the 14 10 by 2110. So now all we need to do is just change the parameter value. So if we scroll down to our dimensions, there's our with still 15 10. So the selective value change it to 14 10 press OK, I know you can see in our type selector there is our new 14 10 by 2110. It's very important. Remember to duplicate. If you don't, you're gonna change the parameters and values off the original door on. It's gonna upset what we've already put into the drawing. So that would place our 14 10 door and you notice when I go to place on the wall, it will automatically sent to the door for me so you can see kind of jolts a bit. So I now know that that door, if you look at my temperature mentions it centered between the column on the adjacent partition. Double escape to finish, then we have. So we have our three different door types in our drawing. So before we move forward, what we're going to do is one of rename these doors and give them a unique name. This will become more clear towards the end. So the 1st 1 is the 9 10 door that we have inserted. What we're going to do is gonna rename that, give it a door type one. So DT 01 So how we can change the type is we just select the door at a type rename relieve the actual width and height will just type in DT Dash 01 before press. OK, so now everything remains the same. Always. Jenna's just renamed it. I'm a press. OK, so because I changed that one type fight, select the other door You'll also notice that the name it has been renamed So each one of these doors, they're all in the intent of the same properties. And if you change one type, I will change all the others. So will now change the 15 10 door again, selecting the door at the type of the properties Rename will change it to DT Dash zero to on Press. OK, announce a d t dash 02 for door type zero to That's okay. Again. If I select the other one, you'll see as well been renamed last able to select our 14 10 rename. Not as well. Two DT Dash 03 for us. Okay, okay. 28. 6.4 Adding a Wall Opening: Okay, so next what we're going to do is under in a structural opening. So in this section here, we want to have to go between one building on the other. So I'm gonna show you a couple of different methods that we can do that. The first being weak. Incredible opening the second way we can edit the actual profile of that wall so we can put out a section of the wall on 30. We're going to use the structural opening component. So this is just basically a door itself. So it has the same properties as an actual door. It just doesn't have any frame or door itself. So it's just a blank opening. So the first method that we're going to use is a wall opening, too. So that is in the architecture top in the opening panel here, there's our wall. But to get a good view off what we're going to be doing, I'm gonna place a section view. So I used the section views all the time in the project just to get a quick elevation of what I'm doing. You can also place elevation views if you want, but I just find personally that the section views a lot quicker, lot cleaner and so on, So to place it, it's appearing the quick access panel on There's Our section view so clicked activators. So the place my section view click once one click against a place So I started. The bottom went up. If you go from the top down, the view will be the opposite way. We can honestly flipped out. So if you select your section view, you'll see there's are flipping arrow, you conflict of you as well as that. You see the dashed blue line. That is what will be included in the view. So if I wanted all of these columns to be in the view, then I'd leave it where it is. If I didn't only wanted just a small section behind, it was dragging behind. I know everything behind will not be included in that view. Same goes for the with as well. Aiken cycle through the different section heads here. I'm used the grips to extend it out. If the section view is quite long and you didn't want everything to be on display, a little elbow there couldn't have. When we can shorten it down. That's the basics of a section view. So I was going to leave that one on. Every time I place a section view if you come over to the project browser, scroll down. There's our sections heading expanded, not a Section one. So to open up the actual section view, we cannot a double click on Section one on there is a section view. You can also double top on the beak again, not a section view. So we need to do is just expand at this crop view so we can see our view. Have you select the rectangle we get the four grips top bottom left and right, you just click and drag. What I can do now is like an have multiple windows open at the same time to see what I'm looking at, but we're looking at on the screen is called a window tile. If I minimize, you'll see I've got two currently open if I open another. So there's three different window tiles. But of you, all of the different window tiles have become again back up to the quick access. There's our switch windows that we click on that will just display what current window tiles are open. If there's too many open, you can select close our window tiles or clothes. Hidden windows. If there's too many open, you could have 10 15 20 open at once. What you can do is click on the clothes hidden windows that will close all of you, the windows apart from the one that's currently open. So the different window tiles that I want to be open on my ground floor almost opened a three D view on the section view and then to display all of the different window tiles at once. I want type in WT on the keyboard. W T. If the window tell that you want to be displayed isn't on the larger side when you conduce , Just select the header at the top and then w t sacked the head or again. Wt. I'll just rotate the views. So what I want is to have the three D view on the right hand side. Someone just click on the header on just toggle through until it's displayed. Like so there are consuming so that there is the area where I want to place my wall opening . Zoom in slightly and again there in my section view, this is the area I want to at my wall opening on same in the floor plan next to go to the opening panel, Select the wall opening. Then it was click on the three D header there. First I got to select my wall, so just click on the wall itself. And now I simply have to draw the rectangle on the wall again, just placing it anywhere at the moment. So we're not concerned about the hike on the with, and then we have our opening. Once it's placed. Now I can click on my section view. Select the opening. If you can't select the opening first time, just hover over where the edge of the opening is on. Just click on the tab key once and twice on your seats. Now, toggling between everything that's around the cursor that applies to everything, we will use that feature again and again so I can select the opening. Once I have the opening selected, I've got my grips that I could just extend out. So that is one method off, creating an opening the downfalls to this. If I go, my ground for plan. You'll see that the external wall remains open. So what I mean by that is the brickwork doesn't return into the block work or the block Work doesn't return into the brick. Same below. So there is a small downfall to that. So next if you just select the opening on the leaders 29. 6.5 Editing the Walls Profile to create an opening: on. The next method we're going to do is the edits. Profile editing The profile is exactly the same as editing the boundary off our floor. So to do that, go to select our wall on in the contextual tub, there's our edit profile. Select Edit profile. It won't allow me to edit the profile and plan view. It's asking me which view wouldn't like me to go for me to edit profile. So the best view is the section, So C section one open view. If I zoom out, you'll see there again is our single closed loop. That's what I'm going to do is I'm going to draw the opening myself in the draw panel on used the line tool to select the lower end, give a height of, say, 2200 touching to the column bringing back down. Now you can see the three D view there. I have my closed loop, but at the moment these three lines are now just in addition, so if I green take to finish, it will say it cannot complete because of its intersection problems and so on. So I'll click on Continue, Andi, I need to delete this lower segment here, so that lower segment there, I use the spread element to spit. I'm it's removed so that you can see in the treaty viewed a single closed loop so green take to finish and there's my opening again. If I go to the plan of you again, you can see that the wall itself doesn't return in on itself. So what we need to do is to will remove that opening two ways you can either just undo on doing do or go back into the profile editor. Delete what with John. Bring it back to be a closed loop green tick to finish. There's a wall back. 30. 6.6 Adding a Structural Opening to the wall: So the last Met that I'm gonna show you, which is the one we're gonna be using, is going to use the structural opening tool. So, as I said before, the structural opening component is essentially a door. So if we go to our door to again, it's not on the types electricity need to bring it in from the library, so we'll go load. Family Open up the Doors folder. There's a structural sub folder. There's a door opening for us open on the type selector, their displays a couple of different variations. So what we'll do is we'll just quickly place it into the wall escape on. What we're going to do is want to create our own type with their own width and height, so the height will be 2200. But I just gotta work at the wit, so it's going to go between the top column on Lower column to find out the distance between those two columns, I'm going to use my distance tool, which is the little ruler in the quick access panel. So once I have it turned on select from one face to the other, and there's my distance off three meters x. We're going to select the structural opening. We're not going to go to edit type. We don't want to change the prominence off this particular type. We want to remain as it is, so we'll select. Duplicate on First will give the wit 3000 times 2200. That's okay on in here in the dimensions panel we have our rough with which is 95. So we'll change that to 3000 on the height of 2200. Impress Okay, when there's are opening. So the last thing to do is just a position it correctly. So I use my move till because that's an accurate move. Select my start point on finish. So in there, that is now my structural opening. And as you can see, the brickwork returns back into the block. Work on the plasterboard again also overlaps. They're my three d view. We have the nice opening now between the two sections of the buildings when we can have closed down the section view. I mean, when I go back to our ground for a plan. So to do that, we can either go double click here or double 50 Heather, we're back into a ground floor plan. We've now finished with the section view here so we can select it. I hit delete on keyboard. We were given a warning dialog box. Just warnings that were about to do the dissection on the view in the project Riser will also be deleted. So I'm I show that I want to do that. Yes, I am so press. Ok, You see, the sections are gone now from the project rather 31. 6.7 Placing Windows: never gonna move on to the window component. So beside the door component to we have our window component. So going clicked open in the types of actor. We just have one window in the product itself. So we need to do is go to our load family to bring in more windows, so to know which one knows we want to bring in if you go to. Pdf 010 windows, so figure to load family scroll down to the end and there's our Windows folder. It's not important now. Which kind of window you you bring into the project. I lived it up to you at the window that I will be using is down below. It's a Windows triple plane, but again, it's not important. Which one do you bring in again? If you go to the top, you can just use the arrow keys to scroll down. Look into preview box on the right inside to display the different types of Windows. The window that I'll be using is the Window triple plane. I'll impress Open. That's now in my type selector. There we have a few variations off the types we want to bring in two different types into the project we have in 18 10 by 12 10 and 9 10 by 12 10 18 10 is represented by number one on the 9 10 is represented by number two. So I'm gonna select my 18 10 on come down to the bottom half here. So again, like Theodore, you can see that the warning similar touch to my cursor because a window like a door, can only be hosted on a wall. So once I hover over a wall, I get a preview of where the window be placed. So a little trick to know where the exterior face on the window sill off that window is you can tell up by the temper dimensions. So if I hover over the wall having a cursor down the lower half into my temperature mentions air outside. So I know now that when I place this window, the external face of the window is placed to the external side. If I move my cursor above the wall, the temperature matches go inside on my windows. Incorrect. So it was quick ones to place on Zoom in. If you place the window incorrectly. It's not a problem just selected. And there's are flipping arrow. Once the windows in place, though, the temperature mentions do go inside the building. So now what I want you to do is to place all of the 18 10 windows around the building. Just try and get them was equally spaced as possible. Then afterwards, we'll get the nine tens. So I'm not too worried about the positioning of all of your windows because again, this building will be built. It's not gonna We don't have to be 100% accurate, as long as I can show you how you can develop and build a model. Okay, so when you have all of your 18 10 windows placed, then move on to the 9 10 windows. So now we have all of our 9 10 Windows placed the next stage like we did with the doors. What is gonna select one? Rename it again. It's become more parent when we get to the end, of course. So we go to our 18 10 window selected in the Properties Pilot. We're going to go to edit type select rename, and we'll call it W T Dash 01 enter for the 9 10 will select it at a type rename. We w T Dash zero to 32. 7.1 Increasing Top Constraint: We've now created the ground floor plan. We've created the outer footpath boundary, the ground floor slab external walls, the windows on internal doors as well as our internal partitions. The next stage of the project, we're going to build up on create the first floor to get a better view of what we're going to be doing. I'm going to open up my three d view. So up the top here, the quick access panel selecting the three D house toe open up my three d view as well to demonstrate the increase in height. I'm also going to open up on elevation view. So anyone for now when the East elevation opens, I'm going to reposition my levels or select one of my levels. Zoom in, grabbing the open grip. I'm dragging it to the side. So I want all three of my views to be open simultaneously. So what I'm going to do is use my window tall feature by simply typing in wt in the keyboard. So we have our east elevation, our three d view on our Ground four plan. So I want my three d view to be on the larger side. So to rotate my views All select heading wt If the view you want isn't in the correct location again, just selecting the heading on wt. So there's my three d view. I have my ground for plan on my east elevation, So I'm gonna work on my three d view as it will be easier to demonstrate what I'm about to do. When we drew our external walls on the ground floor plan, there was constraints attached to them. So if I was to select one, come to my properties palette on the left hand side, you'll see that my base constraint is ground floor on my top. Constraint is first for level, so my wall, when I place it started on the ground floor on, came up to the 1st 4 level. So you can also see here in the elevation view. It's attached to the ground for level on has brought up on. Does it now touch to the first floor level? What we're going to do is select one side of the building to increase the height up to the roof level while maintaining the left hand side of the building down the 1st 4 level to select the ground. Four walls will select one. You can hold down the control key and then select each one off the walls individually, or we can do a quick select how we do that as well. Cover over one of the walls. It'll become highlighted in blue Well, then click once on the top key that will then highlight all of the external walls that are joined together. But at the moment, they're simply highlighted. They aren't selected yet to finally select, um, one left click on the mouse on those walls and have selected you can see in a three D view . They're all selected the ground for plan as well as the East elevation. Now we're going to increase the height from our first for up to the roof level simply by changing our top constraint. Now that they're all selected will go over to the properties palette, come down to our top constraint. Click on the drop down arrow on change up to all three roof. Any changes we make in the Properties pilot will not take effect until we either click on, apply or simply move our cursor inside the drawing space. There, we see that the constraint has now been increased up to the roof level 33. 7.2 Placing the First Floor slab: Now that we've increased our walls up to the roof level, when are gonna build our first floor slab in the project browser under floor plans, we can now double click on first floor. There we can see our external walls and then below that in like gray. We can see the external walls, the partitions, those architectural columns and so on. That's simply just the ground for underlay this week and turn off how we do so we'll go to the property section, ensuring that were in the properties of the view. If we have something selected, the properties palate will take on those properties In order for the properties pilot to take on the properties of the view, double top escapes or nothing is selected on the problems. Pilot will now display the views properties. Next, we will scroll down to the heading underlay on our first option. There is a range base level on our base levels currently showing the ground floor, which is the grade out outline on our plan. If we select none, we won't see the ground for being spread anymore. Now that we have are clear working space, we can create our first floor slab. Same processes drawing in the ground. Force Lab will goto. Our build panel will select floor again. We have the same contextual TOB. We must select one of these modes to finish how we draw. We have our options bar with the offset on extend into all core. The difference between the first floor slab on the ground floor is obviously we must go to our type selector and change over the slab type. Reason being is we don't want a ground for bearing sub as our first floor slab. So in the type selector, we have four different types to being the ground force lab. The remaining two a person is a concrete floor. On the second is a timber for, so we will select the floor upper 1 60 mil concrete. Next we go to the draw panel when the drawing method we're going to choose is the pick walls. Once we have it selected will just select each one of the external walls. As we are creating a boundary, it's always best just to place it first green take to finish to ensure that everything is in order when we place a slab that has any components underneath it. We're gonna get these pop ups. The problem was saying would you like the walls that go up to this forest level toe attached to its bottom? So when we put in that 1 60 mil slab, any warlike comes up to the underside of that. We want to connect to the underside of the slab, or do you want to cut right through it? So if we select yes, any wall it goes up to that floor will attach to the bottom of the slab. If we select known any warlords below that slab, simply just going to cut right through. So we're going to select? Yes. The next problem is asking the floor or roof overlaps the holiday walls. Would you like to join the geometry on? Cut the overlapping volume out of the wall. What that means is when the floor slab meets that external wall, do you want to slap to cut into the wall itself or not? So, yes, we do select. Yes. Even idea off that I'm going to place a section view. So there we can see the floor slab cutting into that block work. So the block right now sits on top of that slab and comes up to the underside. Well, we can see the partition coming to the underside of the slab. Now that we know that the boundary of that's lab works and everything is OK, you want to go back into editors? So if you can't select the slab like I can't at the moment, come down to select elements by face, which is this tool here, turn that on. So now we are able to select the slab. You can either press enter double tap or click on edit boundary in the contextual top. And what we're gonna do is we will open up this area here because this is gonna be a double height lobby. If you open up the pdf 011 for us floor, you'll get the dimensions off this opening selected here on this dimension. Here's 6388 green tick to finish on again. We'll get the same pop ups. Go to the three d view spin around there. We could see our opening 34. 7.3 Adding a Shaft Opening to the slab: in this scenario to access the first floor, we have opened up that floor slab by pulling it back. This obviously won't apply to every single project by pulling the slab back. Later on, we're gonna be placing a stairs to come up to this lab. This obviously doesn't apply to every scenario earlier on we created on opening in the Wall . What we're gonna be doing now is doing the same method book reading a shaft, opening in the slab itself, sticking with the architecture Tabor in the opening panel. Earlier, we used the wall opening. We're not going to use the shaft opening. It was select that they are green contextual top again. Our molds here to accept or council on a draw panel. Again, we can do by chain offset radius against similar commands. The method that which we're going to draw our shaft today. I'm going to just use the rectangle tool, so select the rectangle drawing on the slab on green tick to finish. Now, if we go over to our three d view, we hope to see the shaft which we created to adjust the shaft. If you hover over with the cursor, we can see a three D visual ization off that shaft. If you can't just hover the cursor over the edge of the shaft, Andi hit the top key. Each time you said at the top, it's gonna find a different component around the cursor. Once the shop then appears, click to select it to adjust the shaft. We cannot use the grips like so to put it right through the building. Or, once it selected, we can come to the property section. I'm we can use the constraints. So, for example, if we constrain to the ground floor of zero, have the top constraint it first floor on increase up by 300 is our shop. So right now it's sitting on the ground floor level, so it's not cutting through the ground floor slab. I change the base. Offset to minus 500. It now comes through the ground floor slab. The shaft opening is best used for your stare cores, risers, smoke shafts and so on. We're not finished with the shaft opening so we can leave it out of the project as we're not gonna be going forward with this 35. 7.4 Selection Filter and Aligned to Selected Levels: Now that we've increased our top constraints, we've placed our first floor slab and created the opening for the stairs. The next stage is to bring up all of our columns as well as our windows. On our first floor loud is a copy off our ground floor layout instead of us going around placing all of these windows again, as well as redrawing those internal partitions and placing those doors were able to use a selection filter to select what we want, then copied to the clipboard. I'm well to pace it upper level to the exact position off the ground floor. What I'm going to do is closed in any hidden windows that I have currently open. I'm going to open up my grand for plan hitting WT for my window tile so we can see in the three D view are changes taking effect. Next, we'll go over to the ground floor plan and will start to use our selection filter. Earlier, I showed you the two different methods, all creating a selection. We like to go to the top left corner, dragged down to the bottom right to make a selection window, or we start in the bottom right, moving up to the top left, creating a crossing window. For this method, I'm going to use the crossing window on. What we're going to do is highlight this side of the building, ignoring the left hand side, starting from the bottom right hand corner, click ones and drag over this section of the building. Trying not to get any of the information on the left hand side included Andi letting go. Once we've made the selection, architectural top appears on our selection panel appears in. There is our filter was select filter. The filter panel here displays everything that's currently selected. It also counts them force, which is a great tool if we're trying to count certain objects in the project. First off, as an example, I'm just going to select my columns. So instead of decelerating each one, I can come to the right hand side on select check non, and then I want my columns to be selected as well as my structural columns. Once I have them ticked on of them, press apply and you'll see that they are now highlighted in blue on press. OK, now that we have all of our columns, highlighters. What we're going to do is do the exact same as we did with our external walls. Were going to increase our top constraint to the roof level. We'll come over to the properties pilot under constraints, go to the top level heading if they drop down arrow and select roof again. The changes won't take effect unless we press supply or simply move our cursor into the drawing they can see on the three d view. All of the columns have increased in height up to the roof level. As I said earlier, the first floor plan layered is a copy off the ground floor plan layout. Again, we're going to use our selection filter, so click and hold. Drag the cursor over the building. Try not to get the left inside again. But if you do, we can de select it. Andi let go. Next, we'll go to our filter. I'm more check none, So everything's turned off. Now we can use our filter to audience the components that we wanted to copy up to our first floor. We've already done our column, so we'll leave that off. We want to bring our doors up elevations. we don't floors. No grid's columns of use. No, we do want our walls and windows. I want to have those three selected our doors. Walls on windows. Well, press supply. Impressive. Okay, But as we've selected walls, both the external and the internal fall into the same category, so they're both highlighted. We don't want the accident wants to be copied up because then they'll be duplicated over each other. So we need to de select those external walls. So to de select a component, hold down the shift key. When you hold down the shift key, you'll see a little negative symbol appears on my cursor. We can then select the external walls and what we don't to be selected. If you accidentally select one of the partitions to re selected, hold down t