Adobe Photoshop Photography Masterclass: Photo Editing & Retouching for Beginners | Skillademia Academy | Skillshare

Playback Speed


1.0x


  • 0.5x
  • 0.75x
  • 1x (Normal)
  • 1.25x
  • 1.5x
  • 1.75x
  • 2x

Adobe Photoshop Photography Masterclass: Photo Editing & Retouching for Beginners

teacher avatar Skillademia Academy, Creative Skills for the Future

Watch this class and thousands more

Get unlimited access to every class
Taught by industry leaders & working professionals
Topics include illustration, design, photography, and more

Watch this class and thousands more

Get unlimited access to every class
Taught by industry leaders & working professionals
Topics include illustration, design, photography, and more

Lessons in This Class

    • 1.

      Welcome to the Course

      1:14

    • 2.

      Editing a Portrait

      18:06

    • 3.

      What is Camera Raw

      24:05

    • 4.

      Camera Raw Editing

      13:05

    • 5.

      High-End Portraits

      30:31

    • 6.

      Portrait Makeup

      35:24

    • 7.

      3D Portraits

      34:11

    • 8.

      Studio Background

      39:49

    • 9.

      Color Change

      6:57

    • 10.

      Golden & Blue Hour

      22:14

    • 11.

      Instagram Landscapes

      37:41

    • 12.

      Neon Signs

      18:33

    • 13.

      Removing Subjects

      11:04

    • 14.

      Replacing Skies

      4:52

    • 15.

      Sky Replacement Tool

      5:28

    • 16.

      Object Color Change

      32:52

    • 17.

      Class Project: Edit Your Own Photo

      1:24

    • 18.

      Congratulations! What’s Next?

      0:56

  • --
  • Beginner level
  • Intermediate level
  • Advanced level
  • All levels

Community Generated

The level is determined by a majority opinion of students who have reviewed this class. The teacher's recommendation is shown until at least 5 student responses are collected.

27

Students

--

Projects

About This Class

Ever taken a photo that looked great in your head, but didn't quite turn out the way you imagined?

Maybe the lighting was off, the colors didn't look right, or there was something distracting in the background. With Adobe Photoshop, you can fix those problems and take your photographs even further.

In this class, you'll learn how to edit portraits, enhance landscapes, adjust colors and lighting, remove unwanted objects, and create beautiful photo effects using Adobe Photoshop.

We'll start with portrait editing. You'll learn how to improve a portrait, make adjustments in Camera Raw, and understand how to work with exposure, colors, and details to bring out the best in your photographs.

From there, we'll move into more advanced portrait techniques. You'll learn how to create high-end portrait edits, apply digital makeup, experiment with 3D portrait effects, and create professional-looking studio backgrounds.

Next, we'll focus on color and lighting. You'll learn how to change colors in your photographs, create warm golden-hour and cool blue-hour looks, and enhance landscape images for social media. We'll also experiment with neon signs and lighting effects to give your photos a more creative style.

We'll then tackle some of the most useful Photoshop editing techniques: removing unwanted subjects, replacing skies, and changing object colors. You'll learn how to replace a sky manually and use Photoshop's dedicated Sky Replacement tool, giving you different ways to improve the atmosphere of an image. We'll also look at how to make these changes feel natural and consistent with the rest of the photograph. Throughout the class, you'll follow practical examples that show you how to apply these techniques to real images, rather than simply learning what each tool does.

Finally, you'll put everything together in a class project, where you'll choose your own photograph and create a complete edit using the techniques you've learned.

By the end of the class, you'll have a much better understanding of how to edit portraits and landscapes in Photoshop, improve lighting and colors, and transform ordinary photographs into more polished and creative images.

What You'll Learn

  • Edit and enhance portraits in Adobe Photoshop
  • Use Camera Raw to adjust exposure, colors, and details
  • Create high-end portrait edits
  • Apply digital makeup and creative portrait effects
  • Create studio-style backgrounds
  • Change colors and improve lighting in photographs
  • Create golden-hour and blue-hour effects
  • Enhance landscape photos for social media
  • Add neon lighting effects
  • Remove unwanted subjects and objects
  • Replace skies manually and with the Sky Replacement tool
  • Change object colors realistically
  • Create a complete photo edit from start to finish

Requirements

  • Adobe Photoshop installed on your computer
  • Basic familiarity with Photoshop is helpful
  • No previous photo retouching experience required
  • A willingness to practice and experiment with different editing techniques

Who This Class Is For

  • Beginners interested in Photoshop photo editing
  • Photographers looking to improve their editing skills
  • Content creators and social media enthusiasts
  • Aspiring photo retouchers
  • Anyone interested in portrait editing, landscapes, and creative photo effects

Meet Your Teacher

Teacher Profile Image

Skillademia Academy

Creative Skills for the Future

Teacher

NEW CLASS: Runway AI Video Masterclass: Create Cinematic Clips, Characters & Effects

Ever had an idea for a video but didn't have the footage, equipment, or time to create it?

Our new Runway AI Video Generation class is all about turning ideas into finished videos using AI.

We'll start with the fundamentals of prompting motion, camera movement, and action, including how to plan your shots and avoid wasting credits. Then you'll learn how to generate videos from text and images, build connected scenes, and use keyframes to control movement and transitions. We'll also get into editing, including changing backgrounds, weather, lighting, and visual styles, along with color grading and upscaling.

And ther... See full profile

Level: Beginner

Class Ratings

Expectations Met?
    Exceeded!
  • 0%
  • Yes
  • 0%
  • Somewhat
  • 0%
  • Not really
  • 0%

Why Join Skillshare?

Take award-winning Skillshare Original Classes

Each class has short lessons, hands-on projects

Your membership supports Skillshare teachers

Learn From Anywhere

Take classes on the go with the Skillshare app. Stream or download to watch on the plane, the subway, or wherever you learn best.

Transcripts

1. Welcome to the Course: Have you ever taken a picture that had potential, but didn't look quite the way you imagined? Maybe the lighting wasn't right, the colors looked flat, or maybe you just wanted to transform it into something more creative. And that's where Photoshop really comes into its own. So welcome to the Adobe Photoshop Photo Editing Master Class. My name is Osteichii and I'm a photographer and visual designer with over five years of experience. Have used Photoshop for everything from subtle portrait retouching to complete creative transformations. And throughout this course, I'll share with you the techniques that I use to turn an image from its original state to the final polished form. We're going to focus heavily on photography. You will learn how to edit portraits, create high end portrait edits, apply digital makeup, change backgrounds and colors, remove subjects. By the end of this course, you're going to have a much broader Photoshop toolkit and the confidence to take your images from what they are into something very polished and professional. So fire a Photoshop, and let's get started. Mmm 2. Editing a Portrait: We're going to see how we can quickly edit a portrait as an add like a mood to it, change the colors a bit, and maybe add some special effects as well. So in order to do that, you first need to import your image. Unlike other illustrations, you cannot just drag your image on top of a Canvas because images have their own pixels, the amount of pixels, they have their own resolutions and you don't want to mess that up when you bring it onto a already determined canvas. Always open your pictures in a new window. To do that, you go in file open, and let's see where it is. I think it's in my downloads. There we go. Open. And it opens it in a new window. Let me just close this one. Do you want to save it? Don't want to? I got this picture online. Oops I zoomed in too much. Is taken by this person, and you can see that the image is already clean, it has been centered, the sharpness is good. Now, all I want to do in this lesson is to add extra hues, maybe colors and effects to just make it the way I wanted to. Let me first unlock my layer, click on the lock. I'm just going to check to see if I need to remove anything and no. Everything is clean. There's no unwanted objects as well. Again, just like any other thing, we're going to duplicate a layer, drag the layer, come down to this square plus thing. And now I'm going to add my effects. The first thing I like to do is to add a gradient map to just determine just separate the shadows and the highlights. To do that, you would go next to this folder thing. There's this half circle, click on it once. We have this thing called gradient map. Click on it. We have this window right now. Don't worry, this is a separate layer. It did not affect your image. Go on this gradient. Dale click, it will open another window. And this is where you determine the colors for your gradient. You have some presets here. You have the basic blue, purple, pinks, and for this, because we're working with the highlights and the shadows, if you guys remember we said the shadows were blacks, the highlights were white. We have a black and white one here. There it is. Our image is in black and white, but we will fix that and make sure that plaque is on the left and white is on the right. If you do it the opposite way, it will just look like a high key image. Keep it from black to white, make sure there's no additional points. Make sure there isn't any of these. I'm going to delete these. Delete that. I'm trying to delete it. I actually added a bunch. Let me just go back and click on the preset again. Is it okay once you're done. When it closes as well, and now from the blend modes next to the opacity, right now it's on normal. That means there's no effect on it. Open that window and we have a lot of blend modes. Now because we're trying to change the lighting, you would have to go on the luminosity because that is the light. You can see there's barely any difference. If you go on the other ones, it's mostly affecting the colors and the separate sections. Go on luminosity. It okay. Now, if you look at the before and after, you can see that we have more contrast on our image and we can adjust this further by reducing the opacity if it's too intense. Let me go for 59. Now let's look at the before and after. We just added a little bit more shadow and we increase the highlights as well. Go to name this shadow highlights. You don't have to name your layers, it just makes things organized base original. Now that I have the shadows and the highlights laid out, I can go ahead and mess with the colors. If you like the colors, then you can keep it, but I'm just going to show you guys how you can change the colors of an image. Again, we're going to go on that half circle, open it, and we're going to go on selective color. Below gradient map, click at once. We have this window. You would choose your colors here. Right now we are on red, but we have other options as well. But if you look at our image, we mostly have reds to begin with. Let's just click red. And this is where you change the CM Y K values, cyan, magenta, yellow and black. Black would be K and the shortcuts and not B because B is blue. This way, if you move these left or right, you're changing the amount of science in the image. If you bring it to the left, you're on a negative, so you're removing them. If you bring it to the right, you're adding science. I'm actually going to remove the science just to make things more vibrant. Since before the after, you can see we made those colors more vibrant. Let me remove or actually, I'm going to add some magenta. I like the redness of it plus 13. Let's actually add some yellow. I like it to be a little orange, not necessarily red. As for the blacks, the blacks just determine the brightness and the darkness. This is dark, this is light. Let's make it Black, add more black to it, so it's darker and now we have this really nice vibrant orange. We're done with the reds. Let's move on to the greens that we have a very small amount of. You can barely tell, but let's just change the values. I'm going to darken them. Again, you can hardly tell the difference, but I just like to make everything perfect. Let's add some cyan. And the magenta and the yellow values are good. We also have option for the yellow. We have some yellows here. At cyan, remove cyan, you can see that there's a difference in both the face and the flowers up here. I'm going to remove the cyan from it and also remove the magenta. Going to keep her face light because it stands out among all the dark reds. I'm going to close that off and we change the colors. Let's name the colors. All right. Another thing that we can do that we learned previously is to add onto the brightness of her eyes. Again have circle, go to brightness and contrast, add brightness, go all the way, don't worry. Same thing for contrast. We're going to change going to adjust it further. And we were here now we have to go on the mask clay, which is this white rectangle and hold down Control plus I want to invert our mass. Again, black means that there is nothing, there's no effect. Hold control press I, it means that the effect is fully there. Control I again. And go to our brush when it zoom in to her eyeball, increase the size. Make sure you on soft round because this is what it looks like and make your foreground color white. This is what it looks like without a soft brush. It's really rough on the edges. It does not blend it. Right click, change it to soft round, click elsewhere to close that and then just paints her eyes. You can notice that I'm not going in the edges because it will make it look fake just in the middle. Do the same thing for her other eye. There we are. Zoom out. Now she's looking like a supernatural creature. Let's remove some of that opacity. Keep it. I think 50% is good. Really nice effect, makes things makes things look more magical, especially with the way that she's looking at the camera. It just brings out more of the brownness in her eye color. Now while we're at it, let's add some blush. This is optional. Again, you can even add eyeshadow because she doesn't have any. If you want to do that, go to solid color. Choose your desired color. Let's go for this red or whatever color you guys want. I okay once you're finished. Now we can't see anything because we're on a normal layer. We have a solid color. This is called a solid color. Change the blend mode to soft light. You want a really soft visibility to to make things more natural. Then go onto the mask layer again. You're going to invert it. Hold down control, press I once, we've inverted our mask. Go to the brush. Again, the foreground is white. If it was black, you're not painting anything. Right click on your brush. Make sure it's self brown so it blends in perfectly and just brush your desired area. It's looking too intense. Let's reduce the fill until we are happy with it. I'm going to keep it at 32%. Lower my brush size, I'm going to add some color and D below that area. Okay. Now it looks like she has some makeup on. Let's do the same thing for her other eye. Again, because we're on soft light, Photoshop is also paying attention to how bright or dark that area is on its own. Don't be wondering why this area is lighter than the other, is because there's more light on this side of her face than on this side, and that is actually perfect because it makes things look more natural. Now she has orange eye shadow. Again, if you don't like the color, go onto the color layer, dabble click and change your color as you like. You can add a pink, a purple. I'm going to keep perhaps an orange color. I think orange looks better. Let's keep it like that. Is the same color we had. I'm also going to add a blush layer. We're going to do the exact same thing, although I'm going to name these layers, change this to I, change this to I shadow. Create a new solid color layer, again, half circle, solid color, go to red or any color you like. Change the blend mode from normal to soft light, and Enter, invert your mask layer, hold down Control, press I once, invert it. Get your soft round brush, increase the size. Your foreground color should be white and then paint in the areas that you want blush on. Let's add some on her nose as well. Once you've done choosing once you're done with choosing the area, decrease the fill until you are happy with it. Let's keep it at 33. Name the layer, and we're done with her makeup. You can also go ahead and add some extra color to her lipstick, solid color. Let's go for a darker red this time. This is just my preference, soft light, and enter. Invert your mask layer, brush, lower the size, zoom in to be more precise, and fill in those colors. Sorry, fill in that area, not those colors. Lower the size as you go on. You want to make everything look natural. Invert your brush to black to remove the areas that you don't want. I like to brush it softly around the edges just to make things look more natural. Do the same thing here. It's a faded lip color. Can even go ahead and make it darker than it is. Lower the fill if you want to, and there we are. Let's name this lip. We added her makeup with changed the color. Now I want to add a overall filter. To do that, we will need a gradient map. Again, half circle, gradient map. Table click. I've already chosen a preset here. It's just green and red and this creates a vintage filter. We have so much options you guys can choose if you need to or create your own colors. But this is definitely something I recommend for portraits. Once you're done, make sure it's green and red, not the other way around. It okay, close the properties panel, change the blend mode to soft light, hit Enter, let's name it filter. And we're not going to invert the mask. Lower the opacity until you are happy. Let's go to 35. Another thing that I want to do is again work more with the shadows and the highlights. I will use again, circle the curves right here, it's below the brightness and contrast, below the levels, curves. If you've used lightroom, you're familiar with this. Going to bring the bottom up to create a film like effect. Then I'm going to create a point here and just lower the shadows a bit, darken them, that means and work with the highlights, I think it's two and ten, so I'm going to bring it lower. This just creates a soft look. Close the curves, going to call it lights and darks. I would say we're done with our image, and I want to see it before and after. What I like to do is to go on my top layer, come down to the bottom layer, which is base, hold shift while I click the bottom layer, group them with this folder thing, and now we get to see, let me zoom in, fit on screen. The before and the after liking there we are. Just like that, we have created a image. We've edited an image to our liking. We added that retro red and green look to it. If you guys choose your own colors, it's going to look the way that you wanted to. Going to name this edit it. I just like to keep things organized. I hope you guys enjoy this. This is a great thing, a great way to edit your portraits. That's why I like to personally, I don't really use light from that much unless I'm in a hurry and I need to do it on my mobile. I use Photoshop for my portraits because I have so much more options and I can also create layers, which I can change the order and the intensity, the opacity, and all of that. So I hope you guys enjoyed this. I will see you guys in the next lesson. 3. What is Camera Raw: If you've used any image editing software, you might have wondered if you can do the same things within Photoshop. Previously, we were able to see that we can change the brightness, the exposure, colors, and all in our adjustment tab over here. But there is an entirely dedicated handle for photo editing, especially if you have raw image files, which are generally more larger than JPEG like this and have a lot more work that needs to be done to them. So I have these two images. They're in your resource pack. Go ahead and download them, import them into Photoshop. And let's see how we can edit pictures in the camera raw filter. So once I have my image, it's layer zero, I'm going to head over to Filter and camera raw filter. When I click this, it brings me to this entirely new panel. Let me just minimize that. Entirely new panel where everything is just about the photo itself. If you've used Lightroom or any other photo editing software, most of these will be familiar to you, but I will still go over what each of them are for, and as I'm doing this, you guys should follow along so you can get a better understanding of the effects each of these sliders could have. This right here is not a raw file. A raw file is the file that your camera saves in the camera or in the C card as soon as you take that picture. So this right here is a JPEG, which means someone has already edited their raw file, saved it as a JPEG, and then uploaded it to pixels in our case for it to be like this. So if you do take photography yourself, those images that you have in your C card, you can import them directly into Photoshop and make some high end editing. So let's start from the right here. There's nothing over here. First thing is making this full screen. Is not full screen right now. The editing, which is the following sliders that you see, we can adjust the geometry of this, which is whether we want to flip it vertically, horizontally. Do we want to rotate it, change the aspec ratio, scale it in, push it to the right or left or up and down, reset to default. It brings it back to what you had initially. We have the remove tool put in here for us. This is basically a little light room inside your Photoshop, Lightroom has the exact same thing. We have this eraser tool where when you draw on a section, let's say I'm trying to get rid of something here, let go, I will use the content around it to fill that area in. But we can also ask it to use AI to give us a more precise and cleaner effect. So I want to get rid of this red thing. Let's hit remove. We can refine it here. So select it. We can add on to the selection, subtract if we took too much, adjust the size of our brush. And then change that overlay color. Once I'm happy with this, we can hit remove, removing using AI, and now it's gone. So if you saw that the regular eraser isn't doing much, just switch onto this. But I hit that to revert to changes. We have detect objects. We currently don't have any objects here, but say you were trying to get rid of a bird that's standing next to a lamp. If the bird is overlapping with that lamp, you would want to turn this on so Photoshop doesn't remove a part of that lamp and only removes the bird. This is your brush size. We have show overlay, which is when you start drawing, it's going to show you the color that we set to red. We have visualized spots, which allows you to take a look at what you're dealing with here. If you have a very dark image, this could come in handy because it will show you exactly where the edges of the building are and this will help you to make a lot more defined selections. It's a remove tool to remove things. I'm going to uncheck this. And then we can move on to the next one, which is our masking layer. So if you want to make changes to a certain part of your image, you get to use one of these. Let me actually open our other image where we have human subjects, and this way, we can try out a few of these things. All right, so the same thing, but I'm going to go down here and have Photoshop detect the subjects for me. Let's click it once, and there we go. In a few seconds, I now have the perfect selection. Of my subjects. Now, let's say I'm trying to change the colors of the trees. It's a little too green for me. Simply right click on these three dots next to your mask and hit invert mask. Now you have everything but the subject, and you can go ahead and scroll down to maybe hue and get a different color. To see it before and after, just click on this before, after. Now, you can also just begin, I'm going to click that. Begin by having Photoshop detect the sky or the background for you. We don't have that much sky. It's just a tiny bit, but we do have a lot of background. Again, one click, it detects it for us. We can go ahead and make our changes now and revert this back. There are also some predetermined things. So if you're dealing with the landscape, you can edit parts of it, sky or vegetation can see it perfectly detects the two and separates it for you. So if you only want to work with the sky, check that. I create, and now I could maybe make the sky a little blue before or after. Do that. We have the brush, which is what we've had so far in the selection tools, you can just start painting over an area. With photos, it may be unlikely to use it immediately. You could use it to fine tune selection that has been made before using the brush. And when you go over the brush, it's the exact same thing. So size, feathering, which is the softness, the flow of your brush, how much ink there is, and how intense that effect is. We can also hit automsk and have Photoshop automatically detect the edges for us. If you are unhappy with the selection you made, may increase size so you guys can see what I'm talking about. Let's say I made the selection, I'm not happy with it, I could use the erase tool to remove from that selection. Same thing with the brush, we have size feather flow, density, and automsk. We can also use this to invert our selection. So if I chose this, inverting it will grab everything except this. So that's what this button is for. Have some gradient. May I ask if you want to do, let's say, a very heavy effect to the sky, but you want it to die down as it reaches the ground, that's where you can make a linear gradient mask. So let's say I want to add a filter from the top to the bottom. You're just going to click and drag, and you can see that if I keep it very short, the red area, which will be the affected area is very small. But if I stretch it out, it's going to follow the second line at the bottom. Now whatever change I make will gradually die down as it reaches the second line. It also rotate this if I wanted to experiment and even move the points midway. In the same logic, we have a radiance gradient, which means it's in a circular way. You can do a perfect circle by holding down shift on your keyboard. If you let go, you get to make more free form circular shapes. Maybe you can do something like. Next, we have range. So range is going to look at either color or the brightness. So if you want to make one change to all the green parts in an image or all the blue parts in an image, like, let's say, I choose the blue, it's going to detect that from everywhere. So this person's shirt is a little bit in their hair and anything ranging from that area. So you can see the darker colors, which includes their hair and their shirt, even the phone is being affected by the slider. We also have luminance range. So if you want to make some changes to the very bright areas, click one. You can see that it not only chose a sky, but also the highlights of their faces, this person's shirt, fingers, and their hat. And if you saw that it's picking up way too much for you, I'm going to make it really bright, so you can see how we can adjust it. Going over to this slider allows you to decide how much of that luminance you want. So what is the threshold, essentially? So if you push down, it's going to be less intense. So you can see the entire image is now affected by our exposure. Make it smaller, it's going to be more concentrated on those areas. So that's how you get to adjust it. Can also do a luminance map. So anything red is being affected right now, and other stuff are just not being affected. We can also add or subtract via the options that we were given earlier. You can use a brush, add onto it, subtract it with a brush and just play around with it until you have a good selection. Undo that. Now, if you have the latest version of Photoshop, you are actually able to have Photoshop detect the people for you. So when you select subject, initially, we saw that it chose all four of these people. Say you only want to make change to this one person. You can see it even excluded this person's hand. Once you select that, you can now decide what part of their body you want to change. So we can go for clothes, hair, teeth, lips, people, and everything else. So let's go for hair and create a mask for that person's hair. Can now go down here and let's say add more tint to the hair in just a few simple clicks. And if you zoom in on her face, I'm going to use Zoom tool right here. You can see that it looks pretty good. There are some areas that it picked up by accident like her eyebrows, but I actually think that helps sell this idea. But if for some reason it doesn't work for you, remember you can subtract using your brush. Let's remove that. If you remove from the hair, you can see that we're getting rid of that purple. Any imperfections, just fix it up like this, and there we go. Same thing for all the other people, and that is our masking. It's the same thing for all the other subjects. You can also hit all people, and that is pretty much the masking option here. Now, we do have the red eye tool, which we looked at in a previous lesson. I'm just going to go for the preview here so it shows you. We have a red eye situation. Click once, it detects that color and fixes it for you. There isn't much to work with here. I don't have a red eye. Moment. But essentially what it does with the options, let me go for her eyes. You have either a human eye or a pet eye because her eyes are different. Click once on that area and it will do that switch for you. If the pupil is a lot bigger, you can see my brush is different. We can also darken it further using this slider, and it will show you the overlay as you're making the changes. There's also an auto option, so it automatically detects C red eye for you. It's not always accurate, it picked this area. But it does come in handy for certain types of images. We have some presets. So if you're just not in the mood to edit your images, you can always come here and use some of Photoshop's own presets or import your own. So they're actually grouped pretty neatly. We have stuff for portraits. So if they have deep skin, they have medium skin. If it's per season, if it for traveling, there's a lot of options here. These below are the classics, if these are not. To your liking, we can shift the color, be creative with our work. Let me as them out here. We have some black and white images, presets, some other defaults, and then some stuff specifically made for these tools. So for curving or green, and even Wine. If you want to import your own, just go over here, three corners, import profiles and presets. So if you downloaded something from the Internet, that's how you get it inside Photoshop. You can also make your own preset after making some changes yourself. So let's say I have this really yellow preset, I can click this, call it yellow and put it in a new group. It okay? What part of the adjustments do I want in my preset? I'm going to choose all, even though we only did one adjustment. And then once we're done, it okay. So now there's a minu group, and there's a yellow preset. I can add it to my favorites or delete it. Just like that. We have some three dots down here. These are the default that we were using. You can save the image, load some settings from another project, save these settings, copy these settings, paste it to another photo, and some other things here that we already looked at. Alright, so these were the sidebars. This is our Zoom tool, which used to zoom in or out, our hand tool, Believe, the color sampler. So you can sample a simple color and compare them. So it's the same thing as the regular Photoshop. And this right here gives you the grid. If you're dealing with buildings, specifically if you have you're using the perspective tools here. So you want to make sure everything is nicely aligned. You said to default and check those two. And then on the edge, we have some preferences, which you should just keep by default unless you're following another tutorial. So this part is kind of important and that's regarding cache. So if you saw that your camera is way too slow, chances are that the files exceeded a five gigabyte size, so you can just purge it all and it will save you some stuff. That's not going to get rid of your photos or anything, but just those little files that Photoshop makes whenever you make a change to an image. All right let's go back in here and take a look at our edit settings. So start off, we have some automated stuff, so edit this automatically depending on how Photoshop sees it, turn it into a black and white, and you can just undo the two. This slider up here, if you hover over them, you can see how each section is dedicated to one criteria. So exposure. You can click and track it and shift all the values. If it reaches an all time high, you can see how the red on the right is getting turned on and on the left, the blue is getting turned on. You never want to be way too extreme, and therefore, this visualization can help you keep everything balanced. We have profiles can turn into monochrome or color, can browse some other ones. There are some more profiles over here. These one, I would say, are more detailed than presets and you only need to deal with the amount. You can see how with one click, I was able to completely shift the look of my image. Go back from here, we have light. This is everything regarding the lighting of your image. So contrast highlights, shadows, the whites of the image and the blacks of the image. You can see it before and after using this eyeball. Let me reset. Color is in regards to color. Temperature, hot or cold, pink or green. If your image is too green, you can cancel it by adding some pink. That's the logic here, vibrance and saturation. We have effects regarding texture, the finer details. So texture, clarity, you can dehaze it, add some wine, or even add some grain. Curve is its own thing. So when you hover over it, you can see at the bottom right, it tells us what we're going to change. So this one, we're adjusting all the channels. So all the reds, all the greens, all the blues, and the lights and darks. If you go over here, you're only dealing with the lights and darks, only the reds, only the greens, and only the blues. So here we have opposite colors. So if your image is way too blue, you can add some yellow. That's, again, the logic. We can manually type in our input and output, deal with the curve. So you can make it into a linear curve. And if we shift it ourselves, it will turn into custom. Now, color mixer deals with one of the colors. So you can change the reds in the image. We have a lot of green, so we can change the greens. And this is in terms of hue saturation and luminance. You can do only color. Let's go to green. Deal with the saturation of the greens and the brightness. If there's a tiny circle underneath the color, it means you've made an adjustment to it. Alright, we can go to saturation luminance or everything it wants. This is only in regards to how you're seeing the sliders. In all of these, you end up dealing with saturation and luminance anyway. Just a matter of if you want to listed, list it that way. It's really up to you. Now, color grading is going to be dealing with all the colors within the midtones shadows and highlights. Again, you can do all three, just the shadows, midtones or highlights, and you can make some global settings. Once you have your color, you can decide on how bright or how dark it is. In terms of the other settings, you have the same luminant slider, but there is the blending and balance. This will make sure that none of the settings you make previously are too harsh and can help your image look more natural. Detail works with the details of your image. We have the option for you to make things sharper, remove some of the noise, and remove some of the color noise. And noise are basically little pieces of dust kind of sitting on top of your image, especially when you're dealing with a darker one or a low quality image. So we don't have much noise over here, but you can see, even when I move the slider, it does smooth out these pixelated effects. And then when I zoom out, it still looks fine, but it's just cleaning up those imperfection. The color noise deals with the same thing but with highly colored areas. We have optics down here, which deals with the distortion and the Vinier. If you want to do a fish eye effect or want to zoom out center of your work, this is where you get to do it. Now, defringe are color glitches that happen around objects. You can see in the preview showing us an example. You can target that specific color usually it's either green or pink, like a purple pink and you get to select it, then remove it using these sliders. Again, with the same logic of adding the opposite color to get rid of that initial color. Lens blur. If you want to blur out something, you can do that. Let's hit Apply. And then we can just use a slider to blur things out. So right now, we have the background selected automatically, and this slider is only dealing with the trees. We have the way that blur is being portrayed and boosting the bouquet, which would only apply if you have singular light sources coming out. Like if you have a bunch of lamps, this bouquet will look really good. You can decide on the type of bouquet. And use that slider to intensify it. Now, here is where you get to decide what is your range of focus. So automatically detected our subjects and went for the background. But we can have it only apply the blur to the trees like this one tree or just the sky, and that is using this slider. So when I move it all the way to the right, you can see that it blurred out our subjects as well. And then you can move this left or right. This detects the subject and keeps it out of that blurring. And this allows you to choose a singular point as your focus range. So just making sure that this point stays in focus while the rest stays out. We can also visualize what's happening here, so it kind of color coded our entire image. So the purple things are in the background, and the rest are at the center. We have some refinements for you to make for focus and blur. This is with the brush. So just like we had so far with the selection brush, we can adjust things using the refinement brush. Lastly, it's calibration, which helps you balance the overall colors. So if your image is way too yellow, you can remove some of that warmth and balance your image via the primaries. And there we go. Once we have our adjustments, I'm just going to add a preset let's say this is all the changes I've made. I can look at it before and after just to make sure everything looks fine. You can switch to view. Flip it, change it. Once you're done, hit Okay. And now it replaces that first image. So if you want to make sure that you have a dedicated layer just for the camera raw adjustments, you can duplicate that layer before doing it. So that's a camera raw filter. In the next lesson, I'm going to give you guys a raw image file, and then we're going to edit it from scratch. That way you will get a better understanding of how these sliders work and what the main difference is between a JP and a raw file when it comes to photo editing. I'll see you guys there. 4. Camera Raw Editing: So let's go ahead and download our very own raw image using Camera Raw. So in your resource pack, you should find an image with the extension CR three. This is one of those raw formats that I mentioned in the previous lesson, and this is unique to my camera. So yours may be different. If you have a Nikon, if you have Fuji film, a different version of the camera, the numbers may change. But regardless, it still fits in that raw format category. So when I drag this onto my Photoshop icon, do file open that image, it immediately opens camera raw. We can see at the top, it shows my camera name, canon EOS 90 D. Again, yours will be different. But just a mere fact that it detects that it's a raw image format, it brings us right here where we looked at in the previous lesson. Just to get some practice, we're going to edit this image and then bring it into Photoshop to maybe add some other elements. So if we hit Auto, we can make our work a little easier, but sometimes like this instance, it's not exactly a good result. So let's hit Commander Control Z and start editing things ourselves. Before I go into the general editings like the lighting color, I do want to use my heel tool to remove certain things. So right here in my lemon, there are some seeds that don't really look that good. So I will go over here to my remove panel, and I'll turn on generative AI. You could leave it off if you want, then adjust the size of my brush and start painting the seeds. We are currently on the eraser because we just want this gone. We're not trying to replace it, clone it, or do anything else. There we go. Let's get rid of this guy. All right. And I believe we have one big one right over here. Okay, so now my lemon looks more perfect. I can scroll around and just check for any other weird elements I don't want. Let's get rid of this bit of sugar to get rid of it. This is a sugar scrub, by the way, and I'm going to make sure it looks perfect, assuming we want to put this image out there to advertise our product. Just go over any little detail, can even add on to my selection before I hit remove. Then zoom out. Alright, so that was just a quick removal process. This was our before, this is after. Once we're done with this, we can go ahead and move to our mask. Now notice how behind the light source is coming from here and we're getting some shadows casted. I want to get rid of that and make you look like this is a perfect studio and such thing did not happen. So you can go ahead and choose the objects for this, and it should And then from that mask, I want to subtract this middle area, so it hit subtract. And let's go ahead and use. Let's go with brush. Keep it simple. Zoom in, and then using our feathered brush with a decent size, go to increase the density. Remove the edges, remove the things in between, actually. If you're using your mouse, you can also use your scroll wheel to adjust the size of your brush, which is what I'm doing. Once we're happy with our selection, I'm going to create a new mask and simply choose select background. This will choose everything except the object. But I have this in case I want to apply certain adjustments to the objects only. Now from here, I'm going to hit subtract again, then we can choose linear gradients. Start from the corner, make your way to the middle. Let's actually invert the selection, so we can make our changes here. Increase this, match it with a spoon, and then let go. So now I could use my exposure setting to just increase that effect, lift the shadows, lift the blacks, and then remove some of that contrast. So this is going to lift that harsh shadow. There still is some shadow, because that's just how it is. If you put an object in front of a light source, there's going to be shadows. But I didn't like how dark it was. We're done with this, we can go to our let's call this objects. Go to objects, and now I can apply a setting just to these guys. So because we're dealing with fine details, I'm going to scroll down to effect to increase our clarity and texture. And then before or after. So we're making those lemon details and sugar details a lot more crisp and a lot more, I guess, appetizing, we're trying to indicate that this is just full of lemon. It's fresh, refreshing and all that stuff. Okay, let's zoom out. And then we can get out of the mask and just go to our edit to make some overall effects. In terms of lighting, now we're dealing with the entire image. I'm going to decrease the contrast a bit, increase the exposure, lower those highlights, those shadows, increase the highlights, then move on to color, where we're going to make this a little warmer, increase the vibrance, lower the saturation. It was a bit too yellow. Then add a little bit to the cooling temperature, so it's not really yellow. Now, to lighten the edges, I can go on with Wig to the right side to add some whites. Then perhaps you can go over to the yellow colors to increase the saturation. That's the lemon. Then in color grading, we can make some overall stuff to the mid tones. Maybe we can give it, like, a reddish orange tone, hold down shift, click on that circular item to adjust the intensity. Something like that, blend this into our image, and then balance it out. Terms of shadows, I'm going to go for a cooler color to add even more of a balance. Okay, let's go ahead and increase the exposure just a little bit and maybe rotate it a bit. Hit Enter once we're done, and that's pretty much it. So just to see it before and after, this is what we started with. This is what we have now. Once we're done, we're going to hit open, so it opens it in our regular Photoshop, and that's where you get to add your text, the stuff that we learned so far. So go to Window, I'm going to disable the timeline. Command or Control Zero, Command or Control H to get rid of the grid. And over here, I could try something like adding a text behind all of the objects. So let's go ahead and duplicate this. Unlock the layer, Command or Control J. Let's hide the background and call this object. On objects, I'm going to go to one of the selection tools and simply grab the area that has the objects. Click and Track. Let go, and it kind of missed some of the spots, so let's switch over to the quick selection and grab this wooden part of the spoon with a plus. To get rid of those areas, you can hit Q on your keyboard using your white brush. Hit X to flip the colors. And one of the normal brushes with the color white, just go over those smaller areas that Photoshop wasn't able to detect. Hit X to flip the colors and remove with the color black. Once we're done with our selection, we can hit Q again and just make a layer mask. So now what I have is the object separated from the background. I'll do a simple effect with our text layer, so click and drag. Just click, actually, and then use any color you want. I'll go for a gray color. Say this is the slogan. I will increase the size so it fits all of the background, and you can see how I have it underneath my object. I'll try something else because I want fresh to be readable. Stew all fresh. Go to layer zero, go to the crop tool, clear this. I'm just going to increase these sides so that people can read fresh a little better. Alright. Now, grab your selection tool, Marque tool. Hit hold down command and then click on layer zero, then Command Shift I to invert your selection. Right click and hit DeFil option. Content Aware, and that's just going to extend your background for you. All right. Compater Control D, can see it kind of glitched over there. So I don't really need that much space, so people can tell this is an H. G to crop that out like that. Let's move the fresh the text a little bit underneath. Hit Commander Control T and use your arrow case for a little bit of subtle movement. Now what I'm going to do is blend the text into the background using one of the blend modes with multiply. Then we're just going to increase, sorry, duplicate our layer zero, Commander control J, bring it above the text and then hold down interruption between the two to limit this into the text. Right now it's looking pretty light, but we can add one of these to it or just go to adjustments to see the full list. I'm going to use a brightness and contrast adjustment and just lower the Brightness all the way, and the contrast all the way. Now go on D mask, command or control I to invert the mask. B on your keyboard, get a soft round brush and paint in the areas where there should be a shadow on the text with the color white. So now it looks like I have a little shadow on top of my text. I just worked with the opacity, set the copy to 12%, brightness and contrast to 51%. Both of them are clipped to the text, and this is what we have. So that's how you can edit a raw image in camera raw then bring it to Photoshop to do additional stuff like this. In the next lesson, we're going to look at how to edit a high end portrait. That's not a raw image, but we're going to use a bunch of techniques to transform that image completely. I'll see you guys in the next lesson. 5. High-End Portraits: In today's lesson, we're going to be focusing on high end portraits. Now, what that means is that there are portraits that are meant for professional industries, for marketing and all of that. So it's more than your simple preset application, but it goes a lot more into smaller details such as their clothing, their jewelry, their face, of course, hair, and the overall look of the image. In the previous lessons, we learned how to use the camera raw panel, but this is not a raw file. I see in the top right, it's dot png. I could still use the camera raw panel, but when I first imported this image in, it brought me to the default workspace. So that's one important difference to notice. Let's go ahead in our Layers panel. If you're not seeing it, go to Window layers, and I'll call this my original work. Sure to follow along with this tutorial. This is, again, in your resource back, import it in. Rename your base layer, and then simply duplicate it with Command or Control J. So when you're dealing with high end portraits, you want to start from the ground up. So before any sort of creative work, we want to fix or heal some of the areas that need fixing. So when I zoom in on this person's face, it's actually delete this and then decide what we're going to do together. One thing you can notice is all of these noise. These little dust all over the image is called noise. You can see that it goes over her hands, her neck, her clothing, basically everywhere. When I zoom in, we can find little pieces of either lipstick clump or something else. Her skin is pretty rough and you can see that there's a little dirt in her nail. I believe that's piece of fur or something. Her jewelry could be a little bit more golden. Her clothing is it's pretty dull. We could maybe make it a more vibrant color. And then her eyes, they're not popping out. Instead of just guessing and telling ourselves we should do this and this, we can go ahead and use Photoshop's count and note feature. If you go over to the eyedropper tool, long click, there is a Noe Tool and count tool. With the count tool, I'm first going to decide which areas I want to fix. We said we want there's this little fur here, I'll hit one. Let me make my size a little bigger. There we go. So there's one. We also said that there's some dirt in her nails. So two around her lips, there's clumps, three, her eyes need to pop four, jewelry, five, clothing, six, noise, seven, then skin eight. And I think that's about it. Can try zooming in a bit more if we find any other detail that we need to get rid of. Okay, so those are my numbers. Now that I have the numbers, what do I want done for each one? So let's grab the No tool. Choose a color up here. I think yellow is pretty good. You also, if you're working with someone else, give yourself a name, but this is just my project, so I'm not going to do that. And just click next to that number to write notes for ourselves. So remove white fur. That's our first one. Second one, clean nails. Third one, remove bumps. Fourth one, make eyes pop. Fifth more gold, six vibrant, seven, remove noise, and eight, smoother face. So if you're working with a really big project, this way, you can keep track of everything. And once you're going along with all the notes, think of this as like Google Docs. When you fix something like node three, which is right next to three, we can just hit delete, so that's like a resolved note. All right, so let's start with number one. And because I'm trying to remove something, that will be a healing layer because I'll end up using either the healing brush or if you want Photoshop generated film. So let's duplicate this Command or Control J. And then whatever layer I make, these will be consistent, so don't worry about that. It's called this layer healing. Now, on the healing layer, I'm going to zoom in to number one and remove that little area. Okay. Let's hold down Alter option. I'm using the healing brush tool. You could use spot healing, too, but I prefer this one and just go over that little area. And that's about it. We're done with one. Number two still requires some sort of healing. So it's very tiny detail, but imagine this were to be printed on a billboard. Someone can catch this because of its larger size. That was number two. I got a little bit here. Number three, we said remove bumps. Again, that's a healing thing. So let's increase the brush size. Sample click. Y. Once we're done with the ellips, we can go to number four. Now, this will need a different type of adjustment. So it's no longer a healing thing because we're not trying to get rid of her pupils. But instead, all we're going to do is duplicate our original work, call it eyes, bring it above healing. And now on eyes, I'm going to go to my adjustments, choose brightness and contrast, increase the brightness all the way, and same thing for contrast, got the layers can actually get rid of this. Call this eyes. Then on D layer mask, Command or Control I to invert it. Next, use the fill to make it very subtle and then using your white brush, so hit X to invert the colors in a much smaller one on soft round, we're going to draw on the layer mask, basically slowly introduce that glow. It as again to remove with the color black. And this brightened up that person's natural color, natural eye color. If you want, you could play around with the fill, but of course, you don't want to be overboard with it. So that's looking pretty good. You can also change your eye color if you wanted to with hue and saturation, but I'm just going to leave mine as that. Now, for number five, we said we want it to be more gold, just to make it look very intense, especially since her hair is on the warmer side. So what we're going to do is just like eyes, make an adjustment. I will go with hue and saturation, increase the saturation, so we get more of that golden color. And then right after, go to adjustments again and get maybe a curves panel. Using this, the center line, which is the midtones. I'm going to make it a bit darker or in our case, more deep. And then let's see what else can we add? Maybe some branes to target those areas that were not intensified by saturation. Now we have three adjustments for this one thing. We can go ahead and use a group to grab all three, Commander control G, call this brings. I'm not sure if she has earrings. She does have earrings, but it's very Very subtle, so I'll just call it rings. Now, on rings because we don't want all of this applied to the rest of the model, I'll make a layer mask. Again, Command or Control I to invert it using the color white, a soft round, break going to zoom in on one of the areas, and start painting that in. My fill is 100, my flow is 38. Yours may be set to 100, but essentially it's going to slowly introduce our adjustments, and I could just build up by going on it numerous times. Is better than if it were 100, you get to just push in a bunch of adjustments and end up not making the adjustments look natural. So before or after, it's a lot more golden. Just be sure to clean the edges so we don't have an awkward ring around the ring. All right? That's our ring one. Hit to invert the colors. Go to the other ring and just repeat the process. All right. And then last but not least, her earring, which is kind of hard to see, but nonetheless, it's part of the image. Now, the good thing about using adjustments rather than colouring the area ourselves is that it's using the colors from the original image. So at no point did I add a hue filter where I manually chose the golden color and applied it with win mode, but instead relied on the colors that were simply not that visible because of the bad lighting. So there's a ring. Let's go to number six, which is for clothing. Again, we're going to need a bunch of adjustments. By the way, you can also grab the adjustments from down here. It cuts off here. So that's why I'm going to this window. It's the exact same thing if you click on this. All right. So with this, we definitely want more color. I'm going to go for ibns because it's a very pale color to begin with. So 67 for that, let's go to color balance. It's a little bit too green, so I'm going to add some magenta. If it's too red, we can add a little cyan, then maybe a little blue to balance it up. So before after, you can see how with a few sliders and adjustments, we were able to bring her shirt back to a paler white color rather than a neon green, which is what she had before. We can also go ahead and add a brightness and contrast to make that shirt a little brighter and then just lower the contrast. Once you're done and happy with the way the shirt looks, don't mind the other parts. Like another group, Commander Control G, all this top Hold down, alter option, and then click on Layer mask, and this will do that inverting for you. So no command or control eye. Grab your brush. We're going to need a bigger size for this, flip your colors and start painting it. Now, one thing to notice here, the edges of the shirt is very detailed and I can't possibly recreate it with my brush strokes. So what we're going to do is make a selection of our entire subject. Go to healing, go to Selection Tool, get the cloud, create a selection. There we go. I'm going to hit Q and make sure she's fully in. Once I'm done, I'm going to, first of all, save this as a path. Oops, let's do that first. Delete that. I'm going to call this subject so that I could reuse this selection if I need to. Now, click on this to get the marching ants. Then go back to the layer with the top. With your white brush, simply continue coloring the edges. But now we have that restriction of the marching ants, which means that I'm not going to end up painting the sky in any way and can only draw within the boundaries set by the marching ants. Once you're done, Commander Control D, and then once again, we have the neck line. So let's grab the quick selection tool for now and get this area, the neck alter option to remove from a selection. And then we're just going to invert the selection. So Command Shift I will get you everything except that. Once again, go to your masking, white brush and paint the edges of her shirt. In this way, you're not getting anything on her neck. Commander Control D, and now we have a more precise selection of her top. Now we're going to get rid of the noise, which was number seven. All these little bits are the noise. You can see it goes over the hair, the hand, and practically over the entire image. So to fix that, we're going to duplicate our healing layer with Command or Control J. I'm going to call this base. Now on the base layer, we're going to go over to filter, noise, reduced noise. Since it's pretty bad, we're going to increase the strength to ten. We don't want any details, no sharpening, and then increase the color noise to 100. Setting is default, and now we can hit Okay. Quick before and after, we smoothed out all those specs, but there's still a lot of work that needs to be done. We're going to duplicate base again. I'm going to call this blur. Now on the blur layer, we're going to go to filter blur, surface blur. Over here, we're going to set this to five, the radius, and the threshold a little lower maybe nine. Already, it's looking a lot better. Again, on blur, we're going to go to filter, sharpen, smart sharpen because we still want the details of her face to be there, but just not the noise. Over here, we're going to set the amount to set it to 90%. Set the radius to one and then the reduced noise to 100 and then for remove, we're going to set it to Gausenbler. Once we're done, hit okay, and then we're just going to combine these two into a smart object before going to camera raw to finish things off. So right click on both of them, convert to Smart Object. Call this noise removal, and then on that layer, we're going to use our camera raw feature. No, not only can you now focus on the noise, but you can also do your final edits in terms of coloring. Let's first scroll down to detail and increase noise reduction to around 15 or 16. Same thing with color noise. So now when I zoom in, you can see it's a lot more smooth. And before I hit Okay, we're going to do some overall adjustments. Let's start with the lighting. Let's start with exposure, increase that lighting, add some contrasts. What were those highlights, darken those shadows and play around with it until you're happy with the way it looks. Color wise, it's a little too green, so I'm going to add some magenta to it just to cancel the green out. Then if it's too yellow, we can add some blue. Use vibrance to make the colors pop a little saturation to deepen them, then go to effects, and I will use the dehaze option here and maybe a little wine. On the top, we can see if we have a little bit of a glitch, head over to the geometry tool, and I'm just going to scale this in. Go back here and just continue with your work. It's still a little too green, and I can see that's happening mostly with the shadows. Let's pull the shadows a little bit towards the magenta side. Same thing with the midtones. Now, I am seeing this dark blue background, but it's not as deep as I want it to be. Let's go ahead and use our masking tool, the subject. Then we're just going to invert the selection. Click this. Then using that, I'm going to just work around the background. I think mostly I want to deal with the color alone. Let's go down to saturation, increase that up, and then with the hue, we can do something like that. There is still a little bit of a patch issue here. We'll fix this on the main menu. But for now, let's finish up the mask and go back to Camera Raw to finish the color adjustments. Okay. So this is looking pretty good for me. This is a before, this is an after. So a lot of changes have been made. When you're done with your work, you can hit Okay, and that is going to update the smart object, so this layer. And because it's a smart object, I get to double click on it, go back to Camera Raw and fine tune my settings. But you can see how the regular layer does not have a history of the things you do to it. That's why it's important to convert your layers when you want to do big adjustments like this one. Alright, let's go to our paths panel. Grab the subject path, and oh, actually, we cropped it a little so we can't use this anymore. Just go to any of your selection tools, then select a subject. Now I'm going to invert this, so Command Shift I on your keyboard, go to this thing, solid color, and choose like a better blue. Then we're just going to change the blend mode. If you want, you can mess around with the fill color, but now it's a lot more uniform than the color we had before. All right, so seven was noise. Eight was, I believe, a smooth skin. So let's first clean this up a bit. I'm going to call this BG for background. And now you're going to treat noise removal as your main layer because of all the adjustments we made. So let's go ahead and I'm going to group all of these guys together. Commander Control G, ADJ for adjustments. Now, let's go ahead and duplicate our noise removal, Commander Control J, and call this skin. Now I'm going to rasterize skin. There we go. And what we're going to do is invert this. So on skin, hit Command or Control I to invert it. Then we're going to change that blend mode to vivid light. So it looks weird right now, but don't worry, we have to trust the process. On skin, go to filter, other Pass, and we're just going to go over let me try zooming out a bit on her face. So we just want to make sure that we can see the details of her face, but the skin is just completely out of the picture. So for me, around 24.7 works. If you're using a different image, you may get a different number. Click Okay once you're done. And now we're going to just smooth things out a bit. So go to blur, filter blur. Gadul blur. And now I'll keep adding onto the blur until I'm going to go to reface again until the edges are well defined. So you can see the more I go, the less they're defined. So you got to be careful with that amount. I'll go with, like, two. Click Okay once you're done. And you can see that it's pretty smooth, but it's a bit much. So what we're going to do is make a layer mask, all down alter eruption, then click it, so it's already inverted and then using your brush and a low flow so around maybe 30% with a soft round brush, of course, increase the size of it. Color white, start painting in those areas. Once we're done with our selection, you want to make sure you're not going over the areas that don't need it, for example, her lip. So just switch with the X key on your keyboard and brush out any part that went over the areas that are supposed to be sharp. Like her eyelashes, her eyebrows and all of that. All right. Once you're done, you can see that made a lot of improvements. But to make it more natural, we have to lower the fill. You can play around with this. I like to go about 50% or so. This may be different for another image, play around with it, see it before and after. Make sure it looks natural and it's well blended into the image. Now, the lip also is pretty dry looking. What I'm going to do is duplicate this, delete that layer mask, make a new one, hold down alter option, click lower the fill and just paint the lip alone. All right, so I'm going to call this lips, and that one is skin. Smooth skin is all done. Now, there are some areas where I want it to be sharpened more, and that's where we get to make another duplicate of our noise removal layer. Call this detail, Rasterize it like before. If you don't see it when you right click asurize. On detail, I'm just going to go over to filter sharpen, smart sharpen. Then just scroll over to her eyelash or any other detail that you want to highlight and then you can increase or decrease the amount. I like to add a little bit more than usual, but then remove the intensity via the fill. Again, hold down alter uption, click ones on the mask, the layer mask, lower the fill, pay 26% using the color white soft round. Start painting in the areas that need detail. So I put mine to 100% and just go over her eyebrows a little too. Okay. So we got the smoothness. We got the detail. And now I'm just going to add a little bit more color to her lips and perhaps add some flush here too. So in the adjustments folder, let's make a new adjustment. Let's go to Photo filter. Let's see if we have a red filter here. All right. Go to red and then play around with the opacity until you're happy, preserve luminosity. Flip this mask with Command or Control I, get your white brush, softroundT fill to at least 45 just more than half. Then pretend you just have a blush that you're adding onto the subject. If it's too intense, lower to fill as usual, and now you got yourself some blush. The same thing we're going to do for the lips. I'll make another photoflter. This time I get to use, I'm going to use the color feature, increase the density of it. You can also just grab the color that she has originally, but it's not that deep to begin with. Once you have your color, just changes to multiply, and then perhaps we can go to a different red. So I think this one's better. Click Okay invertu mask, Command or Control I, get your brush, lower the intensity, and just color the lips. I'm using my left and right bracket key to change the size of my brush. My flow is set to 30%, which means I get to build up on my brush as I stroke more. Now, you can use the same logic to put on some eyeshadow or anything else, but I'm just going to leave it here in terms of adding color. And that's pretty much it. So we have our adjustment folder, the lips, the skin, detail, noise removal, and healing. I'm just going to group all of them together to show you a before and after. So this was our before, this is after. Using Photoshops many tools, we were able to completely transform our image that not only had a glitch at the top, but it was filled with noise, not a lot of color. So things had to be removed. And then after some tweaking, we were able to get this high end portrait. That is just popping with color. Now, in the next lesson, we're going to learn more about photoshop compositions, mainly how you can combine more than one image. And we're also going to use photoshops built in generative AI tool. So we can generate things to add some elements to our image. I'll see you guys in the next lesson. 6. Portrait Makeup: In this lesson, we're going to learn how to edit a portrait like we would in lightroom. But this time with Photoshop, we have way more control over the small details because in Photoshop, we have layers, things are a lot easier to control. So the first thing you would do is to import your image onto your Photoshop Canvas. To do that, you would go to file up here, click on it and hit Open. This is my image. I'm going to open it, and there it is. Going to close the other tab. This creates a new tab. You can see the names. G just delete that one. And I'm just going to fit it to screen, and this is my image right here. If you look to the bottom right, we can see that we have one layer and that is our background and it's currently locked. What that means is that I can't really do anything because it's a background layer. So if I want to move it and do other adjustments, the first thing I would need to do is to first unlock it, so it's a normal layer. Now I can move it around and do as I want to. I use Control Z to bring it back. It's the same button in every program. So we have this portrait right here and I'm just going to do a little adjustments with maybe her makeup, her eyes, maybe enhance the freckles, change the color of the background, and just some small things because you can see that this image is already edited. We zoom in, you can see that everything is nicely placed. We have a lot of colors here and the face and the details too. Fit on screen. Now, this rule is the most important rule of Photoshop and you guys need to remember this because if you don't are going to get really hard in the future. When you have your original layer, you always want to create a duplicate and that is because if you mess up the layer, you can delete it and then come back to the original one. You don't have to get out of Photoshop or import the image again. For every new adjustment you want to do, make sure it's a separate layer and you're not putting it permanently on the image itself. Because again, that's hard to undo. You would have to keep hitting Control Z or going in the History panel, which is really time consuming so you could really help yourself out and create new layers whenever you're creating an adjustment. So to create a new layer, you would go on the layer that you want to duplicate. Minus layer zero. I'm going to hold Control and hit J on my keyboard. Now we have a copy of my layer. And that means that I have two images, but they're the exact same. I'm going to hit Control Z twice to get things back. Now, let's say if I don't know, I mess up, I did this, and this is my 34th adjustment. But I didn't realize that I did this. I could just delete that layer and I'm back to the original. Let me just undo that as well. So that was how to create a duplicate or a new layer from a base layer. But if you wanted to create a blank layer, you would just come down here in the bottom right and hit this square with a plus in it. So, it says, create a new layer. Now if I turn the eye thing off, this eyeball is whether you see the layer or not. I'm going to turn both of those off. You can see that layer one has nothing in it. It's just a blank layer, and we would usually use this for maybe adjustments, shapes and illustrations. But that's not going to come in handy right now. I'm going to hit backspace while I was on my layer one, to delete it or hit Control Z again. While I'm selecting the layer that I want to delete, I will come down to this trashcan icon and delete layer one. Yes, there we are. Going to turn these two back on so I can see them. And now we can start adjusting our image. When you want to create adjustment, you would first need to ask yourself, what is it that I want to change? Once you know that and your target area, things will work out a lot more smoother. So let's say I want to brighten up her eyeballs. And now that I have a target location, I'm going to go on this Zoom tool right here just to zoom in a little or you guys can hit hold the Alt key or the option key on Mac and then use your scroll wheel to go back and forward. And wherever your mouse is on, it would zoom in onto that area. If it's here, it's going to zoom in here. If it's over here, it's going to zoom in here. And if you're using this tool right here, you can right click and hit Fit on screen or zoom in and out using the tools, 100%, 200%, print size, fit on screen. I'm going to go to my target area, which is the eyeballs. Now if you want to brighten up a dark place, what would you use? You would use a brightening tool. You would want to add light to those dark areas. To do that, we're going to come down to the bottom right and you can see this half circle, it's a circle cut in half. We're going to click on that and it opens this window. It opens this window, and we have so many options. But for now, we're going to work with the brightness slash contrast. Click on it once and you can see that it created a new layer. That's what we talked about. I I messed up in this layer and I don't want it, I don't need to delete the layer below it because I have a separate layer for the brightness and contrast. But let me turn this off. If I go in my layer, go in image adjustments. Let's have a look brightness and contrast. Maybe did something here. This is what I did. This is going to be permanently on my layer. I would have no choice but to delete that layer. Control Zm. But if I have a separate layer and let's open this, let's say I messed up here, all I need to do is delete that layer. Now I don't even have to touch the layer below it. Let me undo that. And double click on the name just like you would in Lightroom. And first, we're going to do what we just did. We're going to increase the brightness and the contrast. Now I know what you're thinking. This is way too bright what is happening. Let me put this back here. Now we can see that we've brightened the eyeballs. But the problem is that we also brightened up the entire image as well. How do we limit the adjustment to only one small part of the image? That's where the mask tool comes in handy. If you look on the right of this brightness symbol, there's this white rectangle and that is our mask layer. Now you should always remember this white means that the area has an adjustment. If I hold Control I, I'm inverting that and black means that there is no adjustment on that layer. Again, control I inverts that mask layer right here. Control I invert, control I invert again. So because we want to remove all adjustments and only keep it in a small part of the image because the eyes are really small part of the image. Most of the image is her face and the background. So in order to do that, we would need to make our mask layer black. So hit Control I, and now it's black. If I only want it on this layer, I would need to make this part of the mask white so that the adjustment layer is only limited to those areas that I painted white. How do you painted white? You would need to take a brush, right here, the brush tool. Make sure you're on this layer and you can see that you get this circle. To change the size, you can right click and here's the size, can change it, so I would recommend starting with a small size and then working your way up from there. Or you can again be on the brush tool and on that layer, hold all using your mouse, right click on it. Hold that right click and you can see this. Move it to the right, it expands it, move it to the left, it minimizes it. This way is a lot easier to Adjust your size because you're seeing the preview for the brush as well. Now, right and left is for the diameter. If you go up and down, you're changing the hardness of the brush because we're using a soft brush, we would need a low hardness. Again, let me make it smaller. And down here in my colors, I have white over black. If this was black, nothing would happen because our entire mask layer is black. But if it's white, you can hit X on your keyboard to invert the colors. Look down here, hit X, inverts the colors. We're going to need white. If I draw something here, I am telling the mask layer that you can add the adjustment to the layers that I paint. If I do here, there it is now that, let's undo that. Now we can use our brush to add that to the eyes only. Again, I'm going to hold alt and use my scroll wheel to zoom into the eyeball so I can see things better, minimize my brush, and I'm going to start painting the eyeball. And it looks a little too intense, but we're going to fix that afterwards. You also don't want to get too close to the edges. Just want to lightly tap so you get a little bit of feathering on the sides. Let's hold Alt zoom back and you can see that we have brightened the eyes on this side, and this is the before and after. Now this is too intense. It looks like her color is orange and we don't want that. That's where we would have to work with the opacity or the fill. As in these two determine how intense or how visible that layer is. If I bring the opacity to zero, there is nothing. If I increase the opacity to 100, it's all the way there. I would need to work with the opacity until I am happy with the color. Let me see maybe a 35% will do. Now we can see that before and after the eyeball, we have this really nice brown color that wasn't as visible in the original eye. Let's also zoom in on this eye and color the edges. But because we have already adjusted the opacity, it's not going to be as intense as it was the first time. So here we are. I'm going to go on the Zoom, fit the screen, and this is how the eye is looking. Did we make that? I can see something over here. Is this from the original image? It is. Okay. We'll fix that later. Let's zoom out. We're going to turn off the eyeball to see it before and after. We accidentally painted this area. Let's go on our brush, hit X to bring the black because we don't want this area. I'm just going to remove that. Okay, I'm happy with the eye color, the brightness of the color, that is, it was already brown. Now the next thing I want to do is maybe change her eyeshadow color. Now, she already has eyeshadow, but you guys can use this on an image that doesn't have any eyeshadow. In order to do that, there are two ways to do this. If there's a current eyeshadow on her eye, you can change the shade of the color, change the hue, the saturation, the lightness. But if there was nothing on her eye, you would use a solid color. We're going to try both. I'm going to use the color, change the hue and saturation for the eyeshadow, and then use a solid color to add some blush for her. Let's start with the eye shadow. Again, I'm going to go in my half circle over here, click on it, come to selective color right below gradient map, and this creates another new layer for me. Now, before I start this, I'm going to close. This is the properties, by the way. If you're on this layer and you click on this, it will show the properties. If you hit these two arrows, it closes it off, but you can always access it over here. Again, we have the same mask layer as we did in the previous one. But this is all white, so we want to limit it to only her eyeshadow, going to hit Control I again to make it all black, hit the B on my keyboard to get my brush, hold Alt and my scroll wheel to zoom in. And then and right click to expand my brush size. I'm just going to lightly paint, although my color is black, it eggs to make it white. Now you can see there's this little white dot here and that's because we're adding the area right over here. Just to see if I'm choosing the area, I'm going to go into properties. We have some color options, red, yellow, green, cyans and the color we have is mostly red. It has a little yellow in it, but we'll get to that later. I'm going to just mess around with the colors until I am happy with the thing, the color. When I brought down the cyan, you saw that it became a darker colors before, this is after. You can work with the magenta, maybe make it pink, make it yellow. Again, if it's too intense, we can work with the opacity and the fill later. I'm just going to bring it a little bit on the magenta side. You can make it more orange, orange or more pink. I'm going to make it a little more orange, like a deeper orange compared to the one we see here, and the black is just the brightness. If I bring it to the left, it's turning bright. You can say it's not even there anymore. If I bring it to the right, it darkens that color. I'm just going to lighten the color just so it looks a little natural. So let me close this off again. Have a look at the before and after. We did a little bit of adjustments. I was going to maybe intensify the red. Now I'm going to see that I made a lot more change. I'm going to click back on my mask layer, this black box right here. And now that I can see where the adjustment is, if I draw here, you can see that I'm adding the adjustments to the parts that I'm painting. It controls you to undo. And now I can use my brush to maybe give her some color on the areas that she needs it. I'm not really good with makeup, but if you are, then you would know where to paint. I'm just randomly selecting these areas. Let me zoom out. Going to make my brush bigger. And then I'm also going to bring the hardness to zero. It a little smaller, actually, and I'm just going to lightly go around the edges. I don't know this looks right. Let's see here. I go to hit X on my keyboard. I feel like it shouldn't be over here. There we are. Maybe I can add some over here, make it look a little messy. Okay. I'm going to stick with this. Go to do the same for the other eye and keep something in mind that this only changes the color of the area. If one area is brighter, you can see that there's more light on here compared to this, but we're using an equal layer and an equal breath size. And that is only because this area has more light to it compared to this one. That's why this looks brighter compared to the one next to it. Don't think it's because of your selective color adjustment. It's because of the original image. It's going to go down here as well. Now we have more darker orange on her eyeshadow. Let's click on the eye before and after. Again, you can work with the fill layer to adjust the intensity. I think 65% will do. Okay. Now, I'm just going to work with the blush that we mentioned, going back in the half circle, go for the solid color that's all the way up there. And don't worry, your layers are still there T just covering them. So I'm going to choose a color that I like. Usually blush, you want a pink color. Let me have a look. You would want to go for a darker color, maybe this one and then we can work with the intensity later. Choose your color or enter a hex code, hit Okay, and now we have this layer. And now we have to change the blend mode. You can see that it's a solid color right now and that's not what we want. We're going to go on this normal layer and we have a ton of blend modes that we can choose from. This was normal. This is dissolve, darken, multiply, color burn, linear burn, darker color, and all that. We're going to get into those in different lessons, but for now, we're going with the soft light. Click on that. Now our blend mode is self light. If you go on the other layers, they're all normal. We only added the blend mode to this one layer. After you're done, hit inter I'm just going to show what that looks like. You can see the blue line around it, hit Enter to get out of that selection. But now the pink is all over her face and we don't want that. We only want it to be on the areas that we're going to paint. Just like any other color, we're going to go on the mask layer that's currently white, hit Control I to invert it. Again, with our brush tool on the white color, we're going to increase our brush size. And paint away wherever we think that deep blush should be. So this is the colors, and that's how it was looking on the on our model. Again, you can change the fill opacity if it's too intense. This is what I'm going for the before and after. It's a slight change, just like how it would be with real blush. You don't want to dab of color. And I'm also going to add a little bit on her nose. It's all limited to your creativity. So this is the before and after, we've added her eyeshadow, her blush, we've lightened her eyes. Now what we can do is change her lip color. We can use the same thing, go to solid color. You want to give her maybe a red. Let's go with the red, although it does not look well with the other colors that we have. So again, go to soft light. This will make it a little bit redder. Doesn't make it red. That's in another tutorial. Then you go back on the mask layer, hit invert, control I. Hit B on your keyboard or choose the brush here. Zoom in and now we're going to paint away. And again, don't stick to the edges because that will look really fake. You want to keep things inside. You can see I'm not going in those edges because they'll look fake, like we mentioned. We want to make this look natural as if she was wearing the same shade of red. And because our brush was big, you can see that these edges look really, round to fix that we'll just use a smaller brush color and just make our way to the corners. The side is fine. Now she has this bright red color. If you added these, you'd made all these adjustments and you just didn't like the color, you can change it. There's no worries. Go on this layer, which is your color, Dapple click. Bring the window here so you can see, and you can now change the hue, saturation and brightness yourself to change the color that you change it to the color that you want. If I darken my red here, you can see that now I have a dark red. If I make it black, it's still the same, make it brighter. It's a really white gloss. I'm going to keep it maybe over here. I don't want it to be too bright, okay. You can do the same things with the blush. And now I'm going to change the opacity just to make it a little more suitable to my liking. G to go with 52%. Let's have a look at the before and after. We just added a little bit more tint. We did her eyes, her eye shadows, her lipstick. Another thing that you can do with portras is add brightness to the teeth. That's if you want to. The same technique we use for the eye, we can use it for the teeth. But we would need to create a new layer. So let's go back in this half circle, go to brightness and contrast. Or another option that you guys can do is go for solid color, just like we did over here. You're not going to look too different, but both options are there. So I'm going to increase it. I like to go with 100% and then change the opacity and fill here. So again, on the mask layer control, I go to my brush with the white color, zoom in. And just paint those areas. It's looking too bright right now, but don't worry, we're going to fix those. Just going to, I can also go to the black color hit X to remove those areas that you accidentally painted. We had some here on her lip and now that my brush is smaller, I can hit X again to invert the colors and just give this I don't know if that's her teeth or not. Let's just leave that out. I'm going to zoom out right now it's way too bright. It's looking really fake. Let's change the fill to around I think 49 will do. Let's have a look at before and after. Her teeth is looking a lot more wider. Apart from the fill, I'm also going to reduce the opacity. Now you can see that before and after, we have brightened up her teeth. Now that we're done with her face, you guys can use the same techniques to change maybe her eyebrow, color, give her a colored mascara, whatever you like. I'm going to actually change the background color that we have right here. I'm going to go on the half circle thing. Selective color. This creates a new layer, and I'm just going to go for yellow because that's mostly yellow. And work with how the colors are. I'm going to first reduce the yellow to make it a white color almost. Then here I could give it a green work with the cyan if I want to, work with the black and white to brighten up or darken the image to bring back a little bit of the yellow. And yeah, I've just made a white background. Now if we turn the visibility off and on, you can see that we also affected her skin a little, but it's not in a bad way. I'm not going to mask out her face and body. I'm going to keep it the way it is. If we have a look again before and after, it cleaned up her hair as well. Now we have almost white background for our image. Another thing that we can do, although her freckles are pretty visible, so we're not going to touch that. We can see that we have a pimple right here and let's say we wanted to get rid of that. In order to do that, I'm going to have to come all the way down to my layer zero copy. And then I'm going with the heal tool, spot healing. There's different ones. When you go with the spot healing because it's a small dot that I just want to remove. Again, I'm going to use the Alt and right click to increase it, go up and down to change the hardness, zoom in, click once, and there it is. It's gone. It's similar tool to lightroom. Going to remove this as well. There we are. Photoshop is going to use its content aware capability to remove that spot, but also replace it with the right pixels that it gets from the surrounding areas. We remove those pimples and in another lesson, we're going to learn how to smooth out faces if there's a lot of texture and if there's redness and scars, we can remove those in Photoshop. So I'm going to say that I'm happy with my image. If we want, we could add a filter on top. Half circle again. And when you want to add a filter, you have so much options. One, you can add a gradient map. Two, you could add a color lookup, which is just presets and three, you could add photo filter. For this one, the easiest one is to just go to color Loup because these are just some presets that you can add to your image. You can see load three D LUT, open that and you get a lot of presets. And if you click on either one, it's going to be a separate layer, don't worry, you don't need to delete the permanent one. And just like with any other layer, you can change the capacity, the blending mode, and all that. For this one, I'm just going to go through and see which one looks good on my image. That's not looking good. Soft warming look, looks too fake, fall colors. I'm just going to stick with this warm filter, close that off. Reduce the opacity a little bit because she was looking too warm. And another thing that I like to do is to add a gradient map. So on top of our selective color, go to gradient map, and don't worry. This is a separate layer. We can change this. Going to open this. Sorry dabble click on the colors. And I'm just going to go into presets to find the one that I like to use. I believe it's not over here, maybe greens, you know, Neutrals, pastels. I'm not seeing the one I like to use, but it's okay. I'm just going to create it myself. Double click on the end and then choose a green color that you like. I'll go with this, this color. And then on the other side, I'm going to double click and get a red. There we are. I'm going to add this to my presets. There we are. It okay. If I change the blend mode of this to soft light, you can see we get a retro filter on top of our image. Again, this is a separate layer. So if you didn't like it, just delete it and you wouldn't have to touch the rest of the adjustments that you made. Again, I'm going to change the opacity, lower it to the place that I feel is good. We added a filter, we made our adjustments, we changed the background color, and we did a lot of things for an image that was already edited. And what I like to do to see the before and after is that I would go on the first layer, the top layer, that is, come down to the layer zero copy, hold shift, and click on it. I'm clicking all of my adjustments and then I will group them. You can go on this folder thing or hold Control G to group them. Now everything is within my group. This way, I can see a really simple before and after. Let me first zoom in. Zoom into my image and then turn off the visibility. This is our before picture, turn our group back on. And this is our after image. It looks completely different. And it looks pretty good. Again, you can make your own adjustments, your own colors. And this is it. This is how you do some basic portrait adjustments, something that you would need to use in a lot of images. It wasn't that hard. We didn't really manipulate anything, we just dealt with the brightness and the colors. So this is it for this lesson. I hope you guys enjoyed it, and I will see you guys in the next one. 7. 3D Portraits: In this lesson, we're going to edit Instagram portraits, which is also sometimes referred to as three D portraits. The reason why they're called that is that the skin is so smooth, there's a lot of contrast, a lot of shadows, and it makes it look so surreal and three D. For this lesson, we're going to go over a portrait, which is the one you see right here. Then we will go over a landscape and finally a travel photo. Basically what Instagram is made of portraits, landscape images and travel photos. Though there are others, but these are the most popular ones. This image is taken by this person. We're going to get started with our editing. The first thing we need to do, like we mentioned, the images have a lot of contrasts. We need to add more contrast to our image. An easy way to do that is to just get the curves adjustment. Go in adjustments, curves Oops that's exposure, go to curves. And if you guys remember the top part means the highlights, the bottom parts mean shadows. Can even have a look at this. Now, using this finger tool, we're going to make some adjustments. We need to add more contrast to her forehead. You can see as I move around, the scale here moves as well. If I bring it down, we're adding contrast. It's too bright, it's not looking good to bring it down a little bit. Same thing with the cheeks. We're going to bring it upwards. Already there is quite a difference. Our image has more contrast. We will also go for her nose, go upward. It's the same location. You can see that it detects and where else should we work? Let's come on this side, which is the darker cheek, the light source is coming from here, it's obvious that this part will be a little dark. I'm also going to bring her eyes, make them a little brighter. And finally, her chin, bring that below. Already, we can see that we added a lot of contrast to our image. But unfortunately, the contrast is everywhere in the flower crown, we got some in the whale here and we want to just limit it to parts of her face. We already have a mask layer before we do that, let's change the blending mode to luminosity. And then we're going to invert our mask clear, get your white brush soft round, make it white and paint in the areas on her face. Because her skin is so pale, it's looking black, but don't worry about that. We just want this on her skin. Got the nose. All right. We are going to lower the opacity a slight amount. We just made the skin a little darker. Now we'll make another curves adjustment. This time we're going to work with the stuff a little. We make it a little darker, make some parts lighter. I'm just working around to see what works best for my portrait. You guys need to do the same. It's going to be different for every portrait because the light source is different and you just got to experiment. If you go in any of the channels, you're going to have in mind that right now we are dealing with RGB, red, green, blue, but we have the opposite of RGB, which is CMYK. If you go on the red channel, see that it became reddish, if you want more red, you will bring this up, but the opposite of red is Cyan. If you bring this down, you can see that it becomes cyan. If your image is way too reddish, you can just lower that and add some siance to it. Similarly, for green, the opposite of green is magenta. If your image is purple, just got to lower the greens and it will become magenta or vice versa. I don't have that issue for my image, so I'll just leave this B. For blue, the opposite of blue is yellow. If my image is too yellow, I can just add more blue to it or add more yellow. I will add some yellow. Now we know that the opposite of red is cyan, the opposite of blue is yellow, and the opposite of green is magenta. And then we have the opposite of white is obviously black. Let me just show this to you guys. Get a brush because this is really important. Give my brush to show you the exact opposites. R for red, the opposite is Cyan. G for green, the opposite is magenta. B for blue, the opposite is yellow. Then we have white where the opposite is obviously black, but here it will be K. So RGB CMYK, white is not really accepted, but just to show you as the opposite of black, you probably remember that when we change modes, we have one for RGB and CMYK. If you were wondering what the differences, now you know. Always keep this in mind when you're working with channels and when you're just dealing with colors in general. Let's go back to our thing. Our portrait, I'll change the blend mode to color. So far, we were able to turn an image like this to this and then to this. But the image is a little too green, so I will have to go back to my green channel and add some magenta. To get rid of that greenness, now it's no longer there. Now that I have my adjustments, I will change the blending mode of this to just normal. Because she's really pale, it's just making her skin look grayish, but this will be different for every skin tone that your model has. After curves, we can start with other adjustments. We will have to add some shadows to our image. Make a levels adjustment and darken the shadows. By pulling the left level, we have to mask out the face later to add some shadows in the back because the main feature is the lady's face. If we bring this, we're adding contrast, but we don't need that anymore. Can work with the middle level for some contrast. Get your black brush and we're going to get our soft round and just remove this adjustment from her face. We already had one done on her face, and I guess we'll take it off her wheel as well. All right. Now we have a darker background. I will make one similar, but for the face only, focus on the face as you lower the as it bring the highlight slider to the left and the middle slider to the right. That just added more contrast to her face, control I on her mask layer, switch the colors by hitting X on your keyboard and just paint in her face. All right. So far, this is what we did. Just darkened the image, first of all, and then we added some contrast to her face. Without the contrast, you can see that the freckles are not really visible, but with the contrast, we are seeing a lot of freckles. Right. And another thing about Instagram, you all probably know this is that they make the skin way too smooth. So most images on Instagram are photoshopped because they're trying to show a really perfect version of themselves. But we all know that everyone has imperfections. But we have to mimic that perfect look because this is a Instagram portrait. So we are going to make a copy of our layer, then hit Control I, it's going to invert it, control or command I, then change the blending mode to vivid light. It smoothed out everything, then go to filter, other high pass. You see it's back to normal, this is where the smoothing effect happens. I'm going to start from zero. You can see that it's just our regular image. If I slowly come to the right, we are smoothing out her face as we go. I'll stay with 6.6. It okay on the same layer, go to filter, blur, gauge and blur. Just to smooth things out and make it look more natural. 1.4 will do. Okay, and I'm just going to name this smooth skin. Then we're going to mask it because it's on the flower, the whale, and everything. We just want that to be on parts of her face. We're going to hit the mask layer, control I to invert it or command I with the color white and the brush we are going to first zoom in. We can always just change the opacity to lower the intensity. I will do that right now. We're just trying to make her skin a little smooth. I'm trying to keep the freckles, so I'm not going to make it 100%, I just want to smooth out the texture that she has. Like we said, that's how it works. On social media, everything is just way too perfect. Got some on her chin, can go over her nose. Make sure you leave the main features out, which is, her lips, her eyebrows. You can add some in on this area. Adjust your brush to get that perfect area and there we are. We have a look at it before and after. Before after, it's a really slight change, but it's necessary. Another thing that we will do, I will name this group. Now, let's bring this This group, I will name this contrast. All right. Now I'm going to add some brightness to her eyes. She does has colored eyes and she is getting married, I think, we want to make that magical moment. Happen as it was in real life. Go to adjustments, brightness and contrast, increase the brightness. Don't worry about it now, add some contrast as well. Invert your mask layer, change the opacity to 20%. We might change it later on with your white brush, zoom in on her eye, make sure it's soft round. We will skip the corners. We're just dealing with the area that has some color, and we're just lightening the thing. I'll make it 15%. I think it's way too much. Again it depends on the eye color experiment with the opacity and see what works best. Let's have a look. Now she looks more magical. This was the before, before, and this is the after just a little bit of color pop to her eyes just to make her look that magical. Now we can add some details to her face. I'm going to make a new layer from my original. I will call this detail and then we're going to do the same but skipping D inverting, go to filter, come down to high pass. That's too much. We just want to because the smooth thing is on, this is what we're seeing, let me turn this off for a second. Go to filter, high pass and start from zero. Move on. That's the contrast that we're seeing here. Keep going until you start to see the details on her face. See you can see the eyes, but don't go in too much because we don't want it to be that intense, we want to make it look natural. I will go to maybe three pixels, okay. Without the contrast, you can see, this is what it will look like. I'm going to zoom in to see if it's all good. It is. Now we are going to change the blend mode to pin light. I believe that was it. That wasn't the thing. I believe it was hard light. It's hard light. You saw the before and after. Now just mask it controller command I. We are only going to apply this detail to the stuff that need the detail, her eyes, her eyebrow, the other eye, make sure you get the lashes as well. The other eyebrow, and finally, not her lip. We want to keep that smooth. Actually, we'll skip the lip. It's just her eye and her eyebrow. We have a look at a before, this is before. This is after, you can see that it's popping a lot better and it's more visible. If you guys want, you can smooth her lip as well. Let's do that real quick. Control J, call this lips inter. And we're going to control I, just do what we did with the skin so we can get a smooth lip effect, high pass. You can always work with the opacities, don't worry about how much you're putting, but also don't go all the way to the end because this is what you will get. Get around. I'll get 8.2. I will also add blur, the Gaussian blur. I want to just lower this to like maybe one pixel. I'll just type it in. A one pixel is too much. Don't add any blurring. I'll just keep it that way, mask it, invert it, white brush, and let's go ahead and paint in the area. Again, avoid the corners and the mouth opening. You want to make this really natural and that way we will that way, we will keep the harmony. Then just lower the opacity until you get the amount you want. This was before. This is after, it's a little smooth. I will have to lower it even more. Now that I'm seeing her face after, just a little bit of smoothing. Let's turn her smooth skin back on and the contrast as well. Her skin is looking a little too yellow, so I will go ahead and let me see, go to hue and saturation to create a new layer and then just lower the saturation. We don't want her to be yellow. Then we're going to mask this invert it and then just apply that to her skin, not her eye or her lip because those are just separate colors. Just try to get her skin because she's not supposed to have yellow skin. Trying to get everywhere. I got a bit of her hair on your keyboard to invert the colors, spring back her eyebrow. Now this is before, this is after we just removed her skin from being way too yellow. You can always lower the opacity to just bring in the amount of yellow that you want. Now we will start dodging and burning. Make a new layer, call it, dodge and burn. You might have wondered why we're not using this. This way we have more control, you can use this. Essentially what this does is that it brightens up the area, although you have to do it on the actual layer. You see it's brightening up that area. But it's best to just do it with the method that I'm about to show you just because you have to then mask it out and then do all of that. This will just save you some time, change the blend mode to suf light, get your brush, get Just click on this to get black and white, go on white. We're going to change the flow to 2%. W are really little adjustments. We don't want it to be exactly white. And make sure you bring back the flow once you're finished so that if you're going to illustrate after it, it won't be that hard. Now if I go on it, you can see that I'm making it a little white. See, this was with the adjustment. This is without it. Do you notice the really slight brightening effect? If it's too small for you, you can always add the flow. See now it's becoming even more white. This is with the whiteness, this is without it. All right, I'm going to keep it at five and use white for brightening and black for darkening. I'll make this part of her face a little bright because it's not really visible. I want her to be alive. Make sure you use that in the right areas. We can add the rosy checks later. I'll hit eggs to invert my colors. I will go over her eyes and the eyebrows and maybe one dot on her cheek. You can use the dark, the black one around the hairline, the around her cheeks, the chin, definitely her neck. Then we'll go with white. If you know how to apply makeup, this should be easy for you. Just add some highlights. I'll add some on her nose on top of her cheeks. And think of the white as highlights and the black as bronzer. Sorry, it was contour, not bronzer. As contour, so just use it where you would usually add some highlights for yourself. If not, just follow what I'm doing because that wasn't a good area. Now we dodge and burn. You can see the before, the after, kind of change the direction. I did make this place dark, so I'll go in with the white brush to kind bring back the light. This was before, this is after. We made her face a little bit more balanced. Now I will go in with the white here as well with the black, guess I'll go around here. No there. Singular clicks so that you get a little bit of adjustment. Hit Control Z if you added the adjustment on anywhere that you didn't like. There we are. Before and after again. Now that we're done with the dodge and burn, I can go in with another curves layer. There's going to be a lot of them. I do want to darken the shadows a little bit more and add to the highlights as well. I'm mainly focusing on her face. And we can just mask out the whale because it's white. It's going to look a little bit too bright. It just going with your black, soft round brush, make sure you bring back the flow because this is curves. Remove that brightness from her white whale. Actually, I thought maybe we can keep it. It's not too bad. Maybe just this part. Although we'll just keep it. Just lower the opacity a little. Now I will make another curves layer to darken the outsides. Just bring back. Don't mind the face. Just control eye on the mask layer, get your white brush and just paint the areas where it would be the shadows, the background mostly. And we are going to add a little bit on her we because like we said, it's too intense, too bright. Then just lower the opacity as you go. All right. Now we can add a gradient map, go to black to white. This is white to black. Go to black to white. You can see that it looks like a regular black and white portrait. Change the blend mode to luminosity. What this did is it just separated the blacks and whites, but we need to lower the opacity, let's say, about 50%. I'm going to remove it from this part of her face because it's looking a bit too exposed. There we are. Now, anything else that you do from here is just some coloring. I'm going to color mine with this green white sorry green to red corten map. I just like that it adds a little bit of retro effect to it. I'm going to lower the opacity quite a bit. Keep it at nine. You can see it adds a little bit of color. I'll add some brightness. Then some contrast, lower the contrast, sorry, not add. Don't add and keep it like that. Just a little bit of brightening. And let me have a look. I was thinking we could add some extra elements to our image. I'll make a new document or just open. I downloaded this book effect from the Internet and it might not work out. I'm just trying to see how I can make my image even more magical. And before I do that, I need to make a um, copy of the entire image with the adjustments. Let's go on the top layer. Hold down Control, Shift Alt and E on your keyboard. That would be a command option shift and E on Mac. And let me do that right now. It's loading. There it is. Now I have a new layer, which is the original layer, but with all of the adjustments. Let me show you what I mean. I'll group all of these guys. This is the before. Once I turn on my layer one, you can see that this has all of the adjustments. On my layer one, I'll call this base. I will go to filter, Camera Raw filter. You could do this before you started all of the adjustments. I just do it after them so I can just add some final stuff to it. This may look familiar to some of you guys if you know and have worked with Lightroom has the similar settings. In effect, I want to add some vignetting. I will go to the left because I want to darken the edges. I guess about negative 27. We can work with the colors as well. Not the light. I will make the temperature a little bit colder, negative two. I will dehaze plus four, we can change the opacity, don't worry about it. Lower the vibrance because she is looking yellow. Then we will go to a color mixer to work with the colors. I want to change the green into a I don't know if it can detect it. This is a really vibrant green. If you turn it this way, it looks wilted, so I'll just keep it green. The yellow, I will bring it a little bit to orange. And what else do we have? We have some reds in the background, but that's not important. The orange, it will mostly be her face. So be careful with this. If you want to brighten her face, you will go to luminance and then add some brightness to orange, which is her face and her hair, plus ten will do. What else do we have that we can work with? We have some blues, which is her eye color. Just add on to the blue, just to make it pop even more. And if you go to just see what else I can do to make it better. Calibration, we can work with the primaries. If you want, you don't have to do this. I can make it a little bit more to the magenta side, we lower the saturation. Okay, I will go to detail. We don't have any noise. The curves layer, I will kind of bring down Thing brighten up some areas. I was looking for the point curve. I will go to this and again, work with the curves. This is just optional. I want to make it the way that I will be happy with. You guys can skip this step if you are happy with your portrait. All right. I'm done. I'm going to hit. We can see the before and after. This was the before. Since the after it's a lot less crowded. I will bring back the highlights. And this is where it was. Bring back the shadows. I think our vignetting is a bit too much. I will bring it to around 20% and also bring back some of the vibrant that I removed. Actually, since we already changed the skin in our color mixer, we can just keep it at zero. This was the before, this is the after, the outside is a lot less crowded. It looks less intense. I can add a photo filter if I want to bring some of the warmth back. Keep it at ten and then I'll go here and on the FX, go to blending options. And then we're going to remove the blacks, just a little bit, then hit alter our option on the button and then just go away until you are no longer seeing those black backgrounds. I actually decided against this, no. I'm just going to keep it as it is. I feel like it's already magical. I'm going to see the before and after going to group everything, zoom in, fed on screen. This was before and where is the after? This is the after. It's three D like. This is what we mean by three D. I see here, it's flat. But with the adjustments and the effect, it looks three D because we can see the contrast on her skin. Her eyes are popping and so are her freckles and the background is darker than the actual model. If you noticed on Instagram images, they are rather dark compared to other images. If this was a studio image, it would look something like this with the contrast, but the background would not be as dark as we made it here. All right, so in another lesson, we will go over the landscape and the travel images because it will be a little bit too long. This is it for this lesson. In the next lesson, we're going to see how we can edit travel photos and landscapes like Instagram photographers do, which is similar to this one, but it takes a lot less time because we're not dealing with faces and features. We will, however, have to add contrasts and shadows like we did here, but it will be applied to another style of photography. I'll see you guys in the next lesson. 8. Studio Background: All right. There are times when you just want a studio image, but it's just not doable. You don't have the background, you don't have the right location. Maybe it's too hard to go out in nature and take a photo, you end up taking it indoors and you get some background items that you don't want. You have to come back to Photoshop and try to figure it out and put your subject onto a studio background. For this lesson, I got a image from pixels. I was taken by this person and this image from Osplash by this person. So essentially what we want to do is to just cut out this model here. And put it onto this layer. There are a couple of things that you guys need to pay attention to is to first look at our subject. She's sitting down, and as you can see in the image, there is a ground. But in our studio backdrop, these are called backdrops, there is no ground. So preferably, if I want to show that she's sitting, I need to get a backdrop that has a ground, but we are going to try to make it look like the image was zoomed in and maybe we have to take it from this area and above. Because we don't have a ground, right above the line that we see here. So it's not just cutting the subject out and putting it onto a backdrop. It's more about the adjustments and to match the lighting. You can see we have a light source coming from this direction and this side is shadowed. So we need to create that effect onto our backdrop and also leave a shadowed layer because you can see the light source on this image is also coming from the left. So just like here, there's a shadow of our subject. We need to recreate that onto our backdrop. So that it looks more natural and it looks as if this model was actually in a studio when this image was taken. The first thing we need to do is to obviously cut out our model, and there are a couple of ways to do this. We already went over them. You can let Photoshop figure it out by selecting subject. You can select mask, use the quick selection or just anything else you want. I'm going to try and let Photoshop do the thing. I did good. I didn't quite get the chair that we have or the flower. We need to help it out a little bit and add to our selection. To do that, you can go with the plus and just bring in the selection because we need the chair. She can't just be sitting on nothing. Yeah, we got some stuff there. Let's get the flour first. Really lightly add onto the selection, don't rush it or else it will jump to a really big selection, and it will include things that you don't want. Actually, this is something in the backdrop, so this is her flour. To remove Farmer selection, hold down alter option and just go over the areas that you do not want. If you want to bring onto a selection, hold down Shift to bring into the selection. Because my brush is really small, it's six pixels. Let me make it larger. You don't want to make it too large, or else it will be difficult. Let's whoops that's the plus. Look at your brush and make sure it's minus instead of plus. I'll do, single clicks and let Photochef figure things out. You can see that it'll jump back to where it should be. When it comes to sensitive areas, make sure you make your brush smaller, so it doesn't become frustrating and does not take a lot of your time. Alright, now I need to add to my selection. Can lightly bring in those areas. It's okay if it's not perfect. We will go to Select and Mask and use the different brushes that we have to bring in more of the detail that is in the flowers, especially here. Let me also select this area. Let's not do that. We got her hand, we got the flower, we got some extra parts that I will just remove by single clicking. And we have some stuff in the hats that we didn't bring in, so just go over that as well. We ended up bringing the wall. But like we said, it's okay hold down an altar option and let it do its thing. All right. Now let's move on to the selected mask. Let me first grab this part of her dress, and let's go in selected mask. Make sure you are seeing the marching ants. All right we have our wheel mode. You can always change it, go in here and choose anything that you like. I like red because it shows me what I have selected and what I haven't. Using the different brushes, can go over sensitive areas like this flower that we see here. Go over it and you can see how it brings in those little lines. Whereas if we were to use the quick selection tool, it would not have detected the lines here. We got some for her hand. And this is mostly used for fine details. So don't use it for her arm. It's usually used for maybe flowers like this and hair. So really small details that you otherwise couldn't bring in with the other brushes. And you see how perfectly it finds those flowers. Let's do the same thing on this side. It might get some of this flour, you can see, but we can easily remove that with the brush. Now let's move on to the hair. It did good here. We got some stuff over here and this accessory that she has. Just look how perfectly it's detecting the edges, and it's making our job a lot easier. We go in between the hair as well. When you come in this panel, the select and mask panel, you will need to use different brushes. To perfectly select your subject. If I bring this to 100, you can see how perfectly detected the hat, the fine lines, and all that, and saved me a lot of time. Let me go over this part of the hair. All right. Let me check the flowers as well. We have some issues here because it's interacting with the other flowers, so it's understandable. It's a little hard for it to determine. And I will get one of these brushes or actually this, bring in this part of the flower. Okay. Actually brought in make single clicks until the edge of your flower is seen. This is the edge of my flower. It goes from here, and it did a good job. I'm going to let it be. Now let's move on to the other parts of our model. I will zoom out and have a look at what we have here. Again, we're going to cut out this part, so don't worry about the bottom. Or if you have a ground in your backdrop, you don't need to do that. Single clicks, that's the wrong one. Go with this guy. Make single clicks. Let Photoshop do some processing. And you can see that it removes it. We can always feather out our selection. Don't worry about that. All right. Let's move on here. I'll get my plus because we didn't bring in her dress. Oops, I helped Shift Control Z, get my plus. And you can see by just single clicking, I was able to bring back her dress. I'm just going to do this all around my model so I can get every piece that I need, and then I'll be back so we can continue. All I went ahead and cleaned my selection, then I hit done, and I was given a layer mask, and then I proceeded to use my black and white brush to remove some leftovers. I left this one for demonstration. Go on the mask layer using your black soft round brush. Just get rid of any extra lines that ended up coming Onto the visible layer. Also once you're done, again, we're not using this, so that's why I didn't clean this area. If you want to check that you removed everything perfectly, you have to place solid colors below your mask layer. This is a great way to check if you maybe missed some leftovers, maybe you didn't clean up her shoulder right. Below your mask layer, let's call this lady. Below the lady layer, go on the original layer, make a solid color adjustment, fill it with the black color. Or in this case, it has to be she's wearing both black and the chair is white. I think we have to create two solid colors. It all depends on your image. To check her dress, I will use the black color to check her hair, hat, flowers, couch, skin, and all that, I will use the color white. Another thing is that, let me turn these off. If you're bringing back something, let's say, for example, this part was not in the image. I don't know once I'm bringing it back, I don't know when I should curve it in, and I might end up bringing in more than I should and it will be confusing. On your mask layer, go to the properties. If you're not seeing that, go to window. Where is it properties. Then go here, make sure you're seeing this and lower the density. It will bring it back. Now that I can see the original layer, you can see the mask layer, it was black. Now it's gray. Now I know where I need to paint. Just in case you needed that, I will undo what I just did. First I'll start with the couch, I'll turn on my white layer, go in the mask layer and just look for any flyous and you can see we missed this area, and if I didn't put the solid color, I would have a hard time finding these little details that I need to attend to. I'm just using my black brush on the same mask layer to clean up those areas. And right, her couch is finished. Now we'll go to the flour. Can see, again, we have some stuff that we need to clean up. You can always go back in your Select and mask layer or just go to Select and Mask to further enhance the selection, maybe add on or remove something. Just make sure you make a duplicate of your already selected layer like this layer. If you messed up in the second version, you can always come back to this. I didn't finish here. But if I wanted to see if I chose a white dress correctly, I selected it right, I will turn off my white layer, bring back my black color, my black layer. You can see we do have some issues. I think that's part of her dress. Yes, it is. Just by using this, I'll alternate between the black and white color fills to clean up the edges and remove the imperfections and then I'll be back so we can continue. All right. I have cleaned it up and see it's clean, let's delete our color layers. We don't need them anymore. And just as a backup, copy your mask out layer, Control or Command J, and then turn it off. We can bring it below layer zero just in case again something could go wrong. Drag our let's call this lady, drag your subject layer onto the second document. There it is. We just need to resize it. Like we said, we want to cut it out from this area, so just hit Control or Command T on your keyboard, just expand it and let's see. I'm going to to make her bigger. I guess this will do at the checkmark. It's going to do some transforming. There's our subject. Now, we cannot just leave her like that because it looks like this was cut out with some scissors and just stuck onto this paper. We need to make it look like this image belonged to this background. And I'm going to make a copy of this layer. Again, I guess, I'll keep the copy for reference, bring it below here, I'll lock it, then I'll turn it off. In case we need it, I'm going to apply this layer mask and turn it to a smart object because we are going to add a lot of settings to it. It's going to load a little All right. Now we can begin. I did not clean this area. It's fine. The more time you spend on it, the better it will look, obviously. I just try to do the best that I can. Now, obviously, when the camera is focused on a subject and the subject is placed far from the background, the background would be blurred. Let's blur out our background, go to this layer zero filter, and go to Gaussian blur. Actually lens blur is better. Let's add to the radius. We're just experimenting to see what works best. You don't want to make it too blended out because she's not that far from the backdrops, maybe I'll type in 50. I think 50 is good. Hit Okay. Go to wait until it applies the filter. And there we are. So now it's a little blurred. And I'm actually going to undo that. I think 50 is way too much. I'll make a copy. Go to Lens, I guess, if you go on the top part, it just brings back the same settings you had. So right now, I can just click on that. It's adding the same settings that we just made. I just don't have to go in that panel again. And I'll just lower the opacity because I have a copy of the layer below it. There we are. Now I can lower the opacity. Let's try 50. That's a lot better. Hit Enter. Can see before has so much detail after it's a little blurred because again, the subject is not that far away from our backdrop. Now let's add adjustments to the subject and make her look like she belongs in this composition that we are creating. Go to image adjustments. And before I do that, I need to rasurize one layer. So we're going to try this. Sometimes it works, other times it doesn't you've rasterized your lady copy two, go to image adjustments, match color. Again, this might not work. We're just testing things out. And this image, choose a source as the lady image and then make the layer onto layer zero. So as you can see, it didn't do so well, unfortunately, let me try it this way. It's really dark. This did not really work, but it does work with some images. In this case, it didn't. It's all right. Let me delete that layer and I will just make curves layer on top of my lady layer. And we are going to just bring down the highlights a little and limit it to the lady layer because the background is the background. We don't want to change that that much. We are lowering the highlights. That's all we did so far, we are going to maybe add to the shadows because this was supposed to be shot in studio, so we need to match the lighting. I'm lowering the contrast as well. And darkening the shadows. Actually, let's bring it upwards. Just a few adjustments and already you can see it's getting closer to the image. All right. I went on my curves layer. You need to make sure you're on this because this was a mask layer. We don't need to work with the mask yet. Go on this curves icon, and you will be given this property panel. If you're not seeing properties again, window properties. Now, it's different for every background. If our subject was sitting in front of a beautiful sunset, we will have to map the three colors and not really colors, the shadows, midtones, and highlights of that sunset and then bring it onto our subject. The reason why we're not doing it with this is because this is just a solid backdrop and the backdrop is not really emitting white, so we don't really need to change the colors of our subject. But if it was a sunset, like we said, she needs to have a orange hue, maybe on the dress, maybe on the back of her head and all of that. I'll just show you what I mean when I say a sunset background. I'll use this as an example, but it will obviously look different if it was an actual sunset. On your curves layer, go on this eyedropper with a black tip, dabble, click on it. Go before we do that, go to custom right here. I'll just dabble click on the midtones. All right. Then you would have to choose the mid toned from that sunset image. For me, it would be one of these gray lines. I'll just select it and make sure it's like this. If it's white, then that means you are on the wrong layer. Make sure you're seeing some colors. Hit Okay. I'm going to hit no for this, then go to the white, double click, get the brightest color, and we're talking about the background, not our subject. The brightest color would be like maybe this, hit Okay, no, and finally, the darkest color would be something like this. No. All right. At this, what we're about to do is not going to look good because like we said, the backdrop is not emitting light. There is no colors from it. It's just a gray backdrop. What you need to do is to just pair each of the eyedropper icons to the subject. The shadow in Rs object would be maybe this area. You can see it made it like this and make sure it's limited to the subject layer. Then go to midtones, her mid tones would be something like this. Finally, the highlights, it would usually be her cheek or the forehead. You can see we matched the color, but it's not really working out because there was no need for us to do that because the backdrop is not really emitting light, but if we do lower the opacity, it does work out. If you had a landscape image, you will not be lowering the opacity. We matched the mood. You could even try changing the blending mode. I will go to let's see. Now, actually, that'll be too dark. Just lower the opacity until it looks good. I will go to, like, maybe 18%, and we kind of faded out the thing. Let's make another curves layer. Now we're going to work with the lighting. Again, there's a clipping mask. Make sure it's above your subject layer. For this backdrop, if you pay attention, let me turn this off for a second. You pay attention to the backdrop, the light is coming from the left, but it's not as intense compared to the light that's coming onto our subject. We need to lower the highlights for our subject layer. Just grab the top point here and just strike it down slightly. All right before and after, we reduce the highlights and you can also darken the shadows if needed. I will do that a little bit. There we are. We work with the lighting and coloring. You can always lower the opacity if you want. Now, like we said, because both of the light sources are coming from the left, she will need to cast a shadow a really slight one onto this area. Go on the lady layer, go on DfX, and we're going to go to drop shadow. It will open a panel for you. And that way, we can put a really faint shadow. I did not clean this area, but we can mask it out later. So make sure this is checked. You're in drop shadow. You can adjust the opacity. I'll bring it high so we can see the outline. Choose the angle first. So like we said, it needs to be on the other side. Oops, that's the wrong way. That's the right angle. I guess about there, but we want the distance to be more. Oops, that's too much. Maybe around here. Now the shadow is way too harsh, which is not the case if the light source was far away and we also have soft light in studios. This is the shadow you'll get if the light source was right in front of the subject and there's no softeners, and it will end up giving you really sharp shadow lines, which is now what studios have. Increase the size, you can see that we are feathering it out and also increase the spread. But now it's way too intense, lower the opacity just a little bit. Although before I do that, I want to work with the angle. I guess we'll go with this. Then I will lower the opacity. We just want a really faint shadow. We don't want it to be intense, blend mode and multiply and the color is black, hit Okay. Because this was a smart object, we can now see the effects. You can always mask out. If you forgot to clean certain areas like I did, there we are. If you ever wanted to make some changes, just double click on the effect and you're going to get the panel going to lower the opacity even more. That will do. And now I'm trying to see what else we can do for the shadows. It's all right. You can add some more color overlays on top of our layers. Now, when there's something that you often do for your photo editing, let's say it's putting on a color lookup, it's putting a gradient map. You can do something so that you don't have to bring in that adjustment every single time. That is called the actions panel. Go to Window and click on Actions. There it is. Now what this means is that, for example, if I choose a certain action, you can see there are some out there, the Photoshop will do it automatically, so I don't always have to go to the adjustments and choose a gradient map and all of that. Let's do that. I'm going to show the action that I do. Let's say I always add a gradient map that is this color, and then I always end up changing the blending mode and I always lower the opacity. This is an action that I do quite often. But I don't want to do it every single time. I will create a action for it, delete that. Go to the action. It's this play button here or go to Window and bring it and go on this. It says, create new action. We're going to name it so I will write gradient map, red and green. You can name it something related. Set as default action. You can add a function key. If you want, you put a color. I needed, I will maybe add a green color and hit record. Once you hit record, you want to start doing that action and Photoshop is going to track what you do. Then once you finish recording, this part will be red and then you will hit this once you're finished. Then our gradient map red and green will show up here and then whenever I click on it, that gradient map will be there. Let's see how that works. It's going to start recording, go to just do what we were doing. Don't mind anything else, hit Okay, close that, change the blending mode, and then bring back the opacity to whichever number you want. Then go back in the actions and hit this. We did that and going to try to find my actions. Here it is, gradients map, green and red and green. You can see if I close this, there's nothing there. When I open it, it says make adjustment layer, set current adjustment, set current layer, set current layer, which is what I just did. Let me delete this. Now, if I want that gradient map, I'll just go on my layer, the action. Make sure the check mark is turned on and also this little box. I then hit Play. It will ask you to name your layer. I'll just name it Gradient Map one and it will ask me to choose the gradient that I want. I will go to my red, red and green, okay. You can see it added that, it reduced the opacity and change the blending mode to soft light. This saves me some time. I don't have to do it every single moments that I need this retro effect. This is a really handy option that Photoshop gives you. You can use it for anything, maybe you want to turn your image into a black and white, which is a single action click, you can do that. I use it for gradient maps. You can create one for maybe any adjustments that you want. There are no limitations, but I'm going to delete my gradients map. Oops, I deleted everything. Bring back the lady. There she is. I just wanted to remove the gradients map. And what else can we do? I'm going to lower this effect and I forgot to name the so let me figure out what they were. Now I remember this was light and dark and this was color. There we are. Now let's match the hue and saturation as well. Go to human saturation, and we're going to first make a clipping mask. I am going to remove some of the lightness and we're going to add some saturation, leave the QB, the color is all right to bind it all together, I will lower the opacity and I will add more to this light and dark. Then we remove too much of the effect. And to bind everything together, you can add color lookups. Before I do that, I'm going to delete this document. I do not need it anymore. Go on top of human saturation, color lookup. This time we're not going to create a clipping mask because this is a overall effect. Choose any that you like. I'm going to scroll through the codec things that we see here. I see it creates a really retro photobok effect. I guess I will try Fuji. Okay. I like that looking good. We can lower the opacity, maybe change the blending mode. Because the background reminds me of yearbook pictures, I'm going to keep this really contrasted effect and this makes it look the same as the yearbook photos do. It's vintage, it's retro and with what she's wearing, it does create that effect. The hat and the flower, it looks pretty good. This is before and after it was dead back then and back there and now it's alive. Let me go through some more gradient maps. I will try to add some more color to it. You can make it black and white, but it beats the whole purpose of us spending that much time on it. We'll create a black to white gradient, close the panel. Because we didn't close the panel, go to luminosity and this works with the shadows and the highlights. I will lower the opacity a little bit. Again, I did not create a clipping mask because we want it done to the whole thing. This was before and after. You can see it's a little bit of adjustments. All I have my retro image. I am happy with it, though before I finish, I feel like shirt, her dress, actually, is way too bright, so I will lower the brightness a little bit. Okay. Oops. Al right. Let's see. It's a little less bright now and I'm happy with the way my image looks. Let's have a look at it before and after. I guess I'll bring this up so we can have a look at the before and after. It's kind of lagging. We have a lot of layers. And let's group all of our adjustments. So let me turn that layer off. This was the before. This is the after on second thoughts, we made it a little bit too dark. I will delete that. This is why we always do it before and after because we want to see if we overdid our adjustments or if we did them the correct amount. I will delete my gradients and also my color lookup, and there we are. Actually, I needed that. I will just add a really low opacity. Go around. Let's try 28 and see how that looks. I think that looks better, it's not as intense as it was, and it's not as flat as it is without it. Now we will look at a before because we didn't have any shadows. Image looks flat and after we do have the shadow and everything is looking good. All right. That's how you can change the background. Like we said, you can always go back in these layers as long as they are smart objects, you can see I can go back in and kind of lower the shadow opacity. I'll keep it at ten because like we said, the light is not that intense for it to have a harsh shadow. So I hope you guys enjoyed this lesson. We learned how to change the background of images, make it look like this image was taken in the studio, and we also learned the action panel in Photoshop, which is really helpful. Make sure you create your own actions, and I forgot to mention, but you can create your own groups such as the default actions by just clicking on this, we can call this custom. Now we have a custom one. I will drag my uh I'll drag my gradient one inside my custom. Let's close that. And now whatever I create, I will put it inside my custom thing, which you can do by going here and changing the set. Before it was on default actions, now whatever I make will be in custom. I hope you guys enjoy this lesson and that it was helpful for you. Make sure you spend time on your images. Look at it with a fresh set of eyes every time you're not missing out anything, definitely spend time cleaning your image. As you saw, I didn't spend that much time and I ended up bringing in a really untidy selection. But you guys need to definitely clean up your edges. You can soften out the mask as well, spend time on it, experiment with a different adjustments, and see what works best for your subject and your backdrop. I will see you guys in the next lesson. 9. Color Change: So we have two instances of dresses here. We have a dark dress and we have a light dress. What I'm going to do is change the color for both using a few simple techniques. And you can use this for anything else, such as a wall, a book, a couch, anything else that you want. So let's start with the things that are easier, and that is a lighter original fabric. The reason why is because Photoshop can easily tell where the shadows need to be. If there's any details, it needs to conserve. And here we do have some texture on there as well. Whereas with a darker dress, those details are harder to see. So if this had little textures on it, we can't really see it that well compared to our first image. Begin, we're going to grab our object selection tool. You can grab any other option and just go around the subjects dress. I have this on last hope. You have to change yourself, then click and drag, creating an outline for where her dresses. Go once you're done, and then you can hit Q to make sure everything looks good. If not, you can use your brush. I'm getting some details here that are not well, hit Q again and then go to Select and Mask. I'm going to turn this to overlay, use the refine edge brush. I'll just go over the area where the hair is and then this way I could get those little bits of the dress in as well. Hit Okay once you're done, and now we're going to hit Commander control J to create a separate layer from her dress. Duplicate this one more time, and I am going to change the blend mode into something else. I'll go to multiply on top of the base layer. Let's call it that. Let's add a solid color effect. So choose the color. I'm going to do red for both of the dresses so we can tell the difference. Alter option, clip that onto your shirt. Now we're going to change the blend mode here as well. You can see how going over each of these will give you a different result. Think I'll go with multiply, and then let's call this multiply as well. On the multiply layer, we're going to add a levels adjustment. Let me select something else. Once again, clipping this only to the dress. So the more you darken it, the darker the red is going to be. But I am going to leave mine just the way it is. Now that I made my changes, I am noticing some areas where it could be better. So all you have to do is simply hold down command or control on the base layer. Let's actually make a duplicate, commander control, and then make a mask underneath that base layer. So you can delete base for now and just clip this into this layer with a mask. And then duplicate the same thing. Instead of having a separate layer, we can do a mask layer where we can let me just hide this for a second, where we can fine tune the mask with a brush. Click on the mask itself on properties and increase 0.5 feather. And now I can replace that top layer with a duplicate of this since we adjusted the mask and then clip on, and there we go. So we changed the dress color from white to red. Now, for the black dress, it's basically the same process. So what we're going to do one more time is grab the base layer. With any selection tool of your choice, grab the dress. Let go and then zoom in to make sure everything looks good. Then just make a layer mask. Make a duplicate first, and then do that. Another duplicate. Now, over here, I'm going to use the exact same red, clip that on, top layer, set it to multiply, and then go to adjustments levels, clip this on first, and then work with the middle slider. And there we go. Now, starting it this way is really helpful because if you notice something weird, you can always go into one of the layer mask and simply remove it from there. Okay. And there is our other color change. So that's looking pretty good. One other way that you can change the colors if something is by isolating that color within the picture and simply switching the hue and saturation sliders. Let's go over to Camera Raw. I'm going to hide this for now, go to our base layers make a duplicate first. Camera Raw filter. Then going down to color Mixer, we can find the color we're trying to change. Ours is green, and then I can go to hue and simply change the way that looks. So I'll turn it like this. Let's add some saturation and say this is what I'm going for. Click Okay, and that's another way where you can change color. Now, sometimes you may end up getting greens from areas you don't want, such as if you were to have a green necklace. To exclude that from your selection, you can just make a selection of your subject, make a copy and place it on top. And that way you will avoid changing the color of something you don't want. That's how we can change the color of things within Photoshop. In a few chapters, we will dive deeper into this, seeing how we can add a design onto a fabric or an aluminum can, how we can blend things in and fine tune those color adjustments. I'll see you guys in the next lesson. 10. Golden & Blue Hour: Another fun activity that you can do with Photoshop is to manipulate an image and make it look like it's during the nighttime or maybe during sunset, early morning, whatever time you like. Again, it's really simple, just a few adjustments and you can turn this image into that was taken during the daytime. You see that's all bright. We can make this look like she has been working so hard that it's sunset now. All right. I'm going to unlock my background layer before I begin, I'm going to of course, make a base copy. Going to remove certain things like this vogue thing and the hat. That's because I'm trying to make it look like she has blinds over here. And since the sunlight is shining through that, there's going to be some blinds reflection here. Just with my last or tool, I'm going to go one object at a time. I'll go around the vogue frame and then right click go to fill. Make sure it's on content aware. Pass through full mode normal, color adaptation. Okay. Go to wait. It's going to process it. This is really easy because we have a white background and we have colored objects on the white background. Using this method, you can see, flawlessly, we got rid of it. I just hit Control D to D select. Let's do the same thing around this hat. Right click, fill content aware. Okay. Because it's surrounded by nothing, it would be harder to remove, let's say, this frame because the bottom is interacting with the bed frame. Control D to deselect. Already, we just did this, but we're seeing something here. I'm just going to use the same thing. Or let's just try another tool. Go to the Clone tool, make it bigger, hold down Alt to choose a source point and just click on D affected area. Make sure to go over the areas that you just cleaned to make sure nothing is out of shape and everything looks nice. Just a quick before and after. We removed two objects. This golden hour is probably something you've seen online, but sometimes the creators don't tell you how you're supposed to get it, and it's just a quick tutorial to show you how I forgot to mention that I got this image from pixels was taken by this person. Now that we have our base that we can start putting the effects on, I'm going to go to on our base layer, go to camera raw filter. Go on this, it it wait. Camera raw filter as it says, if you have a raw image, telling me more, just hit get started. When you're importing and trying to edit raw images, this is JPEG. We talked about raw. This is the first thing you're going to see. Camera Raw, just raw images in general, they have a really high file size and really high resolution. That's why a lot of photographers they shoot in raw. In your camera settings, you can change the output to either JPEG or raw. So hence the name Camera Raw because this is the first thing you'll see when you bring in a raw image. This is where you can edit your image. It's quite similar to light room. It's like they brought lightroom in Photoshop, not entirely, but they brought all the panels, which is really cool. So the first thing we want to do, if you think of golden hour, the first thing you know is that it's really warm. It has this really nice orange color, and we need to mimic that. The first thing you would do is to change the temperature. If you bring it here, it's too cold, we want to make it warm. Go to 63 and also because it's golden hour, the sun is setting. That means we have less light than we would normally do. Now we can bring in the let's come down. Also because of the intense orange color, we need to increase our saturation. All right let's see. Going to reduce the whites as well, the exposure, not the whites, increase the thing temperature, and I'll leave the saturation as it is, and then come down to color mixer because again, we're dealing with colors. Open that in saturation. We want to increase the saturation for the orange to mimic that intense orange color that golden hours do and all the other warm colors with it. Red we do want to decrease the yellow. Do that and then we're going to come down to color grading. We're still not done with the colors. Make the shadows, orange yellowish color, just orange actually, and make the highlights, sorry, the mid tones, make them the same. So it's really intense orange color. As for the highlights, I'm just going to slightly make it orange, not going to be as intense as the other two. Now that we're done, I'm going to come back to basic. Now I have my colors planned out, I'm going to lower the exposure a little bit more and even just increase my contrast a little maybe a little dehazing. Now that I'm done, let me just increase my saturation, hit Okay once you're finished. You can see a lot of change has been made. It went from morning to the sunset. Now what we can do is mimic those blinds that I told you, I would say it's optional, but if you do this, it's going to look a lot better than if it were to not have any blinds. So I'm going to create my blind with my rectangle tube because there are rectangles. Go to fill, make your fill white. Let me make sure it's, it's white and turn off my stroke. Then we're going to there's no need to hold down shift. Just click and make a thin rectangle. About the size. It's going to fill it in for us. I'm going to position it in the middle. You got to think where you want the blind to be. I'm going to make it look like she has a small window and it's only showing the reflection over here and not on her paintings, but we could also do that on the paintings after we're done. Going to increase the size a little, bring it to the middle. Then we're going to hold down At or actually hold down shift so I can go on the rectangle one, hold down shift to make similar shapes. Or actually we could just copy it. Go to the move tool, hold down Alt to make identical copies of the rectangles. Hold down shift, select all of them. Let's merge the shapes. We have a bunch of them. Let me name this reflection. And now we need to change the perspective because she's sitting at an angle and if the blinds were here, they would not be a straight like this. You need to make it make sense. Control T on a reflection layer. Click, go to perspective and we want to first of all, make it a little bins because like I mentioned, this is taken at an angle. I'm trying to bring it down here just for reference. Try to match deep bed frame so we can keep the perspective correctly. Let me zoom in to see. Just a little lower and then move all the way to this side, you see we missed the spot, make it lower like that. Now the side perspective makes sense. Now if I bring this back up, I will have to make one side Control Z, make it a little like this because again, it's coming from a corner, so we need to make it that way. I'm going to put it in the middle and we can always come back and change this. After you're done and enter. And now we're going to mask our layer because with blinds, it's not going to be just some straight rectangle. Go to your mask layer and using we made a mask layer, and then on top of that, just go with a rectangle tool to create that cut that we mentioned. We're going to copy the same thing, hold down Alt and then bring it to Another location, try to make the edges similar, again, merge the two, the new rectangles and then hold Control and click on it once so that we are selecting both. Actually, let me unselect them. Let's see. Select them again, merge them. And now we can control I. D select remove that. Now it's on one side. I'm going to bring this onto the other side. I don't know why it's acting this way. Let me just bring it here. Again, control, but now it's holding both. S control I. Control I again, go with a black brush and just get the thing done there we are. It's not the right way to do it, but I'm just doing it for now. Now we have cuts in our blinds, which regular blinds would have. We're trying to make it look as realistic as possible. Now in the mass layer, the mass layer, go to properties. We're going to feather it out because it's not going to be as rough as we see it here. Just increase the feathering into it some more oops, sorry, we're on the wrong layer. Go to this layer, and then we're going to do what we were doing. It's too much. Guess this much we'll do, and then we want to go back on our mask layer. Always do the shape first and then come for the mask. This will do. Now it's looking more like the blinds. Just to make sure that it makes sense, make sure that the input, 24.4 pixels is the same here. Or let's just make this 37.8. Now it's looking better. Now we can just change the blend mode. Let's see. I'm going to try to move it. Maybe we should make more. Should we make more? Let's go on Control T on this one only, right click perspective and bring it in the right direction, the space is too much, make the space equal. I might delete this afterwards, change the blending mode to overlay. Do the same thing here. I'll decide if I want to keep both or if I don't want to. Let's see. I guess I don't want the second one. It looks way too excessive. I'm going to actually work with the perspective more, right click, go to perspective, bring it higher and then bring back the corner a little. You can also bring it onto the frames if you want because our layer mask, the blending mode is on overlay, so it will mimic the shapes and you won't have to be worried about it. We're just going to copy, I feel like we need a little more. Let's see. Now I have to change the perspective because it's not even in between. C right click perspective, click and drag, now it's even. You can create a space because most blinds have a hard plastic in between the blinds. But it all depends on what blinds you have in your room. The reason why the corner is smaller, this side is smaller than this is because if the mirror, the blinds were here in this wall, it would start from a corner and then make its way up there. That's why we're making the corners like that. I'm just going to stick with the one. I feel like that's too much. Going to bring it onto my frames just to make it look a lot blended in there we have it. We have a golden hour effect with our blinds, our blinds reflected onto our object. If you guys want, this is optional. I'm not liking that there is nothing here. I'm going to just crop my image. Maybe about this size, hit enter, and then make this smaller so it's in the frame. We worked hard for that, it enter, and now I'm liking this. I didn't like that there was a empty space here, although we did that ourselves when we removed the hat, but now it's better. Just bring it a little down. That's how you fake a golden hour on your image. That's how we look at it before and after, I'm going to group these two by selecting them Control G. Now this was the before, this is the after. Complete different images just by using a few techniques. And now that we're done with the golden hour, we can go ahead and go for another style, which might be interesting to you guys. Again, we're just sharing this for a fun activity. We're going to do what is considered the opposite of golden hour, and it's called the blue hour. And we're going to use similar techniques. We're going to use the camera raw filter and the same blinds that we designed for this because we're going to use the same image. So you can just see how the different lighting and colors will look and the overall image. I'm going to open my layer. I'm going to delete base, but keep the reflection copy. Let me just name it to reflection because we still want the same window. We just want to change the lighting. I'm going to delete base and then just Control G to make a new base. We're starting from scratch. Going to bring this in our group one. Then on our base layer, we're going to do the same thing. Go to filter camera raw filter. Don't go on the first one because that's just the effects that you previously did. Go to this camera raw filter. Now we're going to do the opposite. Instead of making everything warmer, we're going to make things colder. Again, temperature, bring it low. We're making the thing colder, reduce the exposure because again, it's nighttime. I guess this much to increase the highlights a bit because moonlight, reduce that here, make this a little colder, increase the dehazing makes it more intense, where's the contrast? Increase the contrast a little, as well as the increase the saturation. We're going to keep the blue hour effect to make sure it's blue. Now we're going to go in our color mixer. We're working with the cold colors now. Blue, we want to increase the saturation and the same thing goes for aquas. And we're not going to touch the hue. Maybe reduce the purples a bit. That was a magenta, reduce the purples. Come to color grading. I think our blue is too saturated. I'm going to leave it at that. Make the shadows blue, the midtones blue, go for a darker blue. I'm going to make it darker because it's nighttime and the highlights, it's going to be blue but not as blue. I'm going to go with a cyan let me increase this here. The mid tones and the shadows are going to be more saturated compared to the highlights. That's it. Hit Okay once you're finished and now we have a blue hour effect. There is our reflection and because it's on overlay, it's going to go on top of all of our adjustments and we can adjust it if we want. I'm going to keep the vogue photo so it's a little different. And I want to increase the blueness. I'm going to go on top of my reflection layer, adjustment, gradient map, go to blues, go for a darker color. Let's see. Which one will look better. I think this will do, Head okay, close that, change it to let's see which effect should we go for. I guess I'll go with multiply. Let me see how it will look like with reduced opacity. Okay? It's a little too dark but it's nighttime. What can you do? We're going to create a new adjustment layer. Let's go to levels. Sorry, not levels, go to curves. It's the wrong one. Curves and just increase the brightness a little bit. Because we're planning to share this somewhere. I'm assuming that's what you guys are trying to do. You want to make it at least noticeable. I'm going to get the bottom one and just bring it slightly to the right, not too much. And there we are now it has a more night effect. We have the nice moonlight color. It's named lights and darks, darks. The gradient map, we're going to leave it for shadows and reflection. This didn't even take that long. We're going to see the before and after, this was the before. And this is the after. Didn't take that long. It's really nice. Hope you guys enjoy this and you will use these for your images to show your Photoshop skills. I'll see you guys in the next lesson. 11. Instagram Landscapes: This is another part of our Instagram series where we will take this image taken by this person. And we will make it Instagram, give it an Instagram style. This image was already edited, but we're going to go further and add those cold colors that you usually see on Instagram travel photos and a lot of shadows. Let's get started. As always, let's duplicate our layer just in case and then go to our curves to work with the contrast and the shadows like we mentioned to just get a point and just lower it a little bit. Already, you can see we're getting closer to that style. Do the same with the shadows and already we made the image quite dark. We will also add a black to white gradient, but make sure it's not white to black. Change the blend mode to luminosity. This will only work the shadows and the highlights, whereas if it was on color, it's just going to be black and white. Hit enter, then we're going to just lower the opacity as much as needed. All right. Now, another thing that we mentioned, now that we got these shadows out of the way, we need to add some contrast. Go to brightness and contrast and just add some as much as you need. There it is the contrast. We can lower the opacity or just go back in the panel to minimize the effect. As you can see, this image already has a lot of blue and green. You can see here and a lot of brown. We need to enhance those colors and make them shine through because those are what make the style look Instagram like. Make a new adjustment layer, go to selective color. Going to move this a bit here, zoom in. Selective color, as the name says, it will allow you to make some adjustments to the selected colors. We're going to start with the blues, so we can see. If you guys remembered the opposites that we saw in the last lesson, the opposite of cyan is red, the opposite of magenta is green, the opposite of yellow is blue, the opposite of black is white. If I turn it this way, where is our blue. Because that would be more of a Dale click to reset it. I'll go in our science. You can see if we come here, we are removing the science. Therefore, we're making it red, more to the red side. But if we add science, it will be even more vibrant. This was the before. The difference is very little because the image has a lot of vibrant science. And then we can add or add or remove the magentas from our color, I will remove it so I can get this vibrant blue color. Then we can add or remove the yellows. I want some yellows in there, so I will add maybe 19%. As for black, you can add black or remove blacks. I will remove it and remove 18% of the blacks. So already we dealt with the color, the cyan color. I will kind of minimize the magenta. This is not really having an effect, so I'll just tap a click on the name to reset it. Our next color is the greens, go to green, and it's the same logic for every color. Add cyans, remove it. I will add. Let's add the magenta. We are looking for dark greens. Same thing goes for yellow. If you remove it, it will be similar to the blues, add yellows and we're going to add some blacks as well. All right. Let's see what other color we have. I guess these count as red. Let's have a check. It is red. We can add some cans to our reds, remove some magenta or actually add some magenta, can add some yellow and add some black. So with just the selective color, we made a lot of difference. I will use the mask options, go on the mask layers, use the soft round black brush. I want to remove the effects from our model because her skin is looking way too dark. It will get sensitive once it gets to the skin. But if you like the amount that's there, you can leave it B. I'm just trying to make her not look like she's blended into the landscape around her. I will also remove it from the sun hat and also her swimsuit. Now she stands out from the background or the stuff around her. Let's also add some gradient maps, go and Go and discuss the one that I made. Instead of red, we're going to add a blue. I'll go to blue and add a darkish color. I'm just experimenting. Just remove that I just click and drag it down. I will have to replace the two colors because it's always dark to light, as you can see. Keep it dark to light. The blue is way too dark. Let me have a look at my green, look at the settings. The brightness is 60, whatever we choose in here needs to have a brightness of 60 and a saturation of 100. Alright. You can always come back and change it if needed. Change the blood mode to soft light. Just lower the opacity to minimize the effect. Before is after. You can keep the warmth if you want. I'm actually thinking of keeping the warmth. I'll just go back in my gradient map and get my custom one, which is green to red, and this really complements the cyan and the greens that we already had. Hit Okay, close that off, work with the opacity if you need. All right, see what else we can do. Go to hue and saturation and we're going to do with all of the colors at the same time. But of course, we can always work with the mask layer, going to reduce the lightness. Going to add more to the saturation. I'm not going to touch the hue because we just spent a lot of time trying to select the hues, leave the hues be. I also wanted to give it a faded look. I will make another curves layer, bring the darks and lighten them. Try to keep it minimal. I'm also going to perhaps add some to the highlights, which is the white parts of our image, add a little bit of contrast. All right before and after, it's a little bit more faded and we can also add some let me have a look. Actually, I would say it's over. We don't need to do much except I do want to balance the colors. It's a little too red, so I will add some cyan to my colors. So you can see, it is also a little purple, so I will go. I will go towards the green. It's a little too blue, a little bit towards the I will remove some of that green. I was looking too green. After balancing the colors, it's less purple and it's a little bit balanced now. We just balance the colors. I would say I'm done with my image, so let's group everything to have a look at a before and after. This was before and this is after Thursday after, there it is. It's a lot more. It has a lot more contrast, a lot more shadows and it's more on the colder tones than warmer tones. It's actually somewhere in between. We have cold colors, but at the same time, we have some warm hue going around our image. We did a travel image. And now you get to edit yours as well and make it something like this. Now let's look at a landscape image and see how we can make it Instagram. I have this image. Again, I took it from pexels taken by this person, and this time, we have a landscape of mountains and the lake. You can see that it was wintertime. We have a small amount of light. And overall, it's looking bland, so we need to work with it, maybe replace the sky and make it more Instagram like. Because we have a lot of repeated mountain and water, I am going to resize my image or actually crop it, so it's a vertical shot. Just go in your crop tool. We're going to write nine by 16. Which is the although if you were to put it in a post, it would be four by five. This is where it would be Instagram post. Trying to make it leveled in the center. I'll use this and then hit the checkmark once you're finished and now we have a cropped image. Now we can begin editing our image. Go to we have to first identify the issue. Right away, we can see that it's way too blue. We barely have any colors, and it's just looking really flat and boring. Before I start anything, I'm going to replace the sky. We'll go in filter or actually edit Sky Replacement, I'm making a separate layer. I just brought it to the other side. I did a processing, but it gave us the wrong sky. We want to add a blue sky but something more fun with clouds. There it is. This is looking a lot more fun. You can even scroll through and see what works best. Let me try this. I don't like that. Let's go to this. This looks the most natural, so close that off and we can work with the colors, maybe make it a little bit more blue as in cold. You can scale it in or out if you want to. Oops, I went out. I got these empty lines here. The edge, I do want to see if the edge is okay. Let me zoom in. Right. I did well with the edge. I don't need to work I don't need to shift the edge. And let me have a look. Maybe I should brighten the image up a little. Okay. I done. Now we got a lot of options. Before and after. I need to copy this and put it in the reflection. I will grab my quick selection to just select the sky, use the plus like this, not this part because there's this thing here and we are going to copy this and then mask it on our selection. Well, actually, first, we need to rotate it. Control T, right click, flip vertical. And I did the order wrong. I will just make a mask here, and then on this hit Control T and flip it vertical. No seeing much here. Enter. I will do something else, delete that, undo the copy, Control D to deselect. I will make this and this a singular layer. I'll merge the two. It's looking like that. I will create a new layer, Control T, and then flip that vertically. There we are. On this, let's call it reflection. On this reflection, I will just get the eraser tool. And where's the horizon? I'll get a ruler, then bring this back so I can click Hold down Shift to make a clean cut. All right. I'll get rid of my ruler, turn this off for a second on my Sky Replacement group, get the quick selection, and then just select the sky. Then on reflection, hit the mask layer. Now it's only on that layer. I will bring it in closer and then hit Control T. And just wait. Go on the image layer, get my Marquee tool to select this area. Right click, fill Content Aware, and let's see if it can fill it up. I can't really see it because our mask layer doesn't allow that. Let's add this area to our selection and it did a pretty good job. Control D to deselect, and I'm just going to turn this off for a second. I'll make another selection of the sky. Delete this layer mask and then make another thing. Now it's in the water. Then look at here, it's a little bit rough. I'll go in the mask in the properties. If you're not seeing properties, go to window. There it is properties. We're going to feather the edges of our mask by maybe one pixel. Let's try 1.5 whoops. Where's our mask layer? There it is. I will try 1.5. Close that. Let's have a look. It's better, but it's actually the rippling from the water, so we can't really change that. We need to if we have a look at the before image, there isn't much rippling going on. Especially as it gets closer here. Let's just bring this back. We need to do some editing on the clouds. Now that I'm certain that I do not want to bring back any of the reflection layer, I will right click Apply Layer Mask, then we will convert this to a smart object. There it is. Now we have to add some filters to this. First, go to filter, blur, motion blur, bring it here. And I'm going to add a angle to this. Let's try. Okay? So distance. We need to add the distance. That's too much. I will add like 11 angle. And we just kind of want to distort it. You don't want to overdo this. Before I do that, I'm going to copy my reflection layer because as it gets further and comes towards you, the ripple effect won't be as much. We need to recreate that. Let me have a look. We're going to recreate that on the reflection reflection ripple, let's name it that. We will do the same thing. Go to blur motion blur, add a 30 degree angle and add to the distant little by little, and hit Okay. Now we need to make a new document or the rippling effect. Go to file new it's going to take you here, make the width 600 and the height 1,000. Leave the resolution B and make the background contents black. I create and you will get this long document, and we're going to add some noise to this. First unlock it, to filter noise, add noise, come here and we're going to add the whole thing. 400 for the noise. Let me see. Then hit Okay. I actually did something wrong here in your motion blur adjustment, Alright. In the angle instead of 30, go to 90 because the rippling is happening towards us and not to a 30 degree angle or anywhere else. Want to make sure it's straight. So hit 90 and then just adjust the distance as needed. I will kind of reduce it to 47. All right. Now let's go back, and I'll just undo what I did. I'll make a new black layer. I forgot to turn it into black and white. Filter at noise than what we just did, but make it monochromatic, hit okay. Then we're going to go to filter, blur it out because it's way too rough right now. Blur, Gaussian blur. I guess I'll go with 1.5. I see we're just smoothing things out. Maybe I'll just stick with one actually. Ido. Okay. Now we are going to work with the channels because every image has channels, RGB, go to channels in the red one, can see it changes. Let me turn that off. See that it's green blue, it's just green. If we add the blue, it's just blue, you add them together, you get RGB. On the red one, go to filter stylize emboss and add the angle at 180, keep the height like two amount 100. Now go on green and we're going to do the same thing. Filter, stylize emboss and this time we will make it 90, the angle 90, hit Okay, and then go back to RGB, which selects it all, go to layer. Now we're going to zoom out. We're going to expand it towards us, which is the thing with with water in the beginning, it's really intense and as it fades out, it gets less intense. We need to make that perspective. Control T on your layer one, right click perspective, drag it from the side. We want to just experimenting. I'll stick with 67. You can see how from the beginning it's really intense and as it fades out, it's becoming less intense. I will actually make it larger perspective. Add more to it. Okay. Now it's less intense, you can see the blue channels, and then you see the red and the green just go in random directions, which is the thing with water and the ripples in them. Now we are going to save this as a displace map. We will go to first we're going to flatten the image. It's a lot easier to process, go to file, save as, go on your computer. I'll just text up. As a PSD format, just choose Photoshop. Call this water displace map. It's safe. It's going to save it down here. Let's come back to this on our reflection ripple, go to filter, distort, displace and make the vertical scale larger. Like we said, it's going to become larger as it comes closer to us, hit okay. It's going to ask you to choose a displacement map. We already made one. It, it's going to do its thing. Now you can see it's rippled. It's not as smooth as this. We can, however, add more to our values. With the displacement, you just got to work with it and see what works best. For vertical scale, I'll make it 17. I'm just experimenting to see what works best for my clouds. You can see we're getting the effects. And I don't want to do it more. I feel like that's enough. Actually, we should do more. Just experiment with your image. I'll add some to the horizontal scale because it's like 90. Stretch to fit, leave all the settings B, hit okay. It's going to ask me to open that. Let's see if this is better. This is better. We got some of that ripple effect, and now we just have to adjust it and make it better. Can go ahead and close your water document. If you guys did want to change, I just remember that you guys can go in display because it is a smart object. If you didn't convert your image to a smart object, you wouldn't have this option. I will go with ten. I'm just trying to see what works best for my image. No, we don't need to do that. I will, however, put it to instead of 90, make it 85. Choose the same map. It's a little less intense, which is what I wanted. Now, this area, I'm a little confused because once we turn off everything, the original image has this cut from the center and I don't know what that is exactly. I don't know if you guys can see. I will just fix that myself on the Sky Replacement group, the reflection group and the ripple. I will hold down Control Shift, alts and then press E so I can make a copy of everything. Then we are going to just grab everything until that weird part Control J, delete the previous layer, and I will just bring layer two closer. I don't know why it looked like that. It was weird. I'll do that. Then we will go to the mask layer and fade out using a soft round brush, fade out the edge. So it's not as sharp as we saw it. If the line is there, it's a lot more simpler. If it gets on the mountains, just bring back bring back some of that stuff. I will bring it above this a little bit. Oops go to brush. It'd be on your keyboard if needed. I'm just trying to clean this area. Now we need to fix this that we did, we can just go ahead and go on the image layer, get the marquee tool, select some of this and some of that. Click, fill Content aware, it okay. Let it process and fill up that cut that we see. Okay, so it filled it in. We can hit Control D. It's not exactly smooth, but it's right. And okay, we can even go in with, like, the clone tool. Hit S on your keyboard to get the clone tool with a soft round brush, hold down to kind of fill in this gap here. Now that we have edited our image, let me group everything control G. This was before dis after. What we can do is now start adding our colors and all that, because like we said, everything is blue, it's not going to take that long. Although if you guys want, you can change the mountain color. Let me choose this brown. You can always come back and change it. Let me see what color will work best. You can go to color. Try and multiply. Try to see what works best for me. Go with this and enter, Control I on the fill, get the soft round brush, and I'll go with multiply, lower the opacity. I just want to darken the mountains that we see here, although I just realize there is snow. We'll just not do that. Instead, we can just add some filters on top. Let's add our favorite filter and then change the blend mode to soft light, lower the opacity to around 28%, can also add some color lookups. And just experiment and see what works best for you. I will look like fall colors. Don't like that. Just going through each one. I like this more, lower that. Another thing that I wanted to do was to add fog to the edges here. But before I do that, I'll make a curse layer to make it brighter. It's a little too dark. And Bring up the highlights as well. Close that and I just downloaded this fog image from the Internet, drag it onto your screen. Color is black, so we have to change the blendings. Go on the FX blending options. Bring the screen here. On this layer, just bring this slightly until it didn't reach the edges. Hold down tor option, click on the button, and just fade it out. Can also change the blending mode to screen, and I will get a mask and just remove the bottom because it is looking sharp, whoops, with the color black. Just kind of remove that. So now we have a really cool fog effect that I can scale in or out to put it on this. And I want it to come towards me. So right click perspective and just lower make it smaller as it goes towards the top. Or is that not the right place? I'm not sure. Let's not work with perspective. Instead, I will just leave it like that in the corners and then make a copy, Control T, and just flip it horizontal and then vertical so it looks different. Like that. And you can see the edges are rough go with the black soft round and just remove those edges. Get some fog effect that you can actually minimize because the fog would be near the mountains, not exactly near the water, it would be on the mountains. Let's just spring it here. Now we need to remove it from the water to a certain degree. Whoops. It shouldn't be on the clouds that's the wrong layer, shouldn't be that much on the clouds. Lower the opacity until it looks natural. Just do as much as you can. We got some cool fog effects to add to that mysterious landscape that we have here. I will also try to change the color here because you can see that it's reddish. I need to make a color balance layer. If you want to remove the magenta, we need to add some green. Just add some green. If it's too cyan, add some red. If it's too blue, add some yellow. Although the mountain is not looking that nice. I'll make this zero. I'll just work with the magenta and green. I will remove this just hit Control I and just bring the effect on the sky and not on anywhere else because the mountains are looking fine. I'll make a selective color, go on the science and just remove some of that. Should we add? Let's add some science. Let's also add some yellows, add some yellows. It will make this green hoops. A nice little green effect. Let's add some blacks to the science in the image and add some purples. I think we're done. I can do the same thing with the blues if needed. Mine does need it, so I'll just do that. We intensified the colors, now it's looking a lot better. What is that exactly? I'll just remove that because it's going over the mountain. Actually, we should bring it back because it's showing this. I will also go on the smoke layer, the one on this side and lower the opacity even more. 20% will do. And I'm just looking. The ripple should not take place in the end like we mentioned. I will on the mask layer with the color black, soft round just remove that effect and also the same thing for the reflection ripple, can tap in those areas to make it less intense bring some of that back on this area. And also this area. Trolls trying to find this layer. This is the layer. I'll just get the clone tool to just fill in this area, so it doesn't look repeated and also something here. And there we are. We have a really cool landscape image. We manipulated the whole thing, but it's all good. Going to group everything so we can have a look at the before and after. You guys can do this with any landscape that you find is a little bit too bland and needs a little bit of extra elements. This was the before, and this is the after. I kind of look shortened because we removed this. It looked like it was cut. I don't know why the reflection did not start from here. From here. I hope you guys enjoyed this and I will see you in the next lesson. 12. Neon Signs: In this lesson, we're going to look at the many effects that you can put on top of your regular images. These are really cool effects. They don't even take that long, but always fun to work with Photoshop to see which style matches your image more and you can use it to either impress your friends and family and make a cool composition out of your images. For this lesson, I'm going to try to make a neon frame behind our subject. I'm also going to make it look like she is in an underground maybe cafe and is sitting in that area. So this image, I took it from pixels. It's taken by this person Eon the first thing I did was to just unlock my layer by just clicking the lock and then always, we're going to hold down Control us J to duplicate R layer. Let's name this base so that you know what layer I'm referring to when I'm talking about it in the lesson. Before I start with the frame, I'm going to first make the black and white image more dramatic. I can do that by just going on our adjustments and gradient map. This is my way. I like to do it this way, but there are a lot of other ways to do it. Go to basic, make sure it's black to white and not white to black. Black to white, okay. Close this off and I'm going to change the opacity until I am happy with it. I guess 47% will do. This was the before, this is the after, just a little bit more dramatic. Going to name this black and white. All right. Now I can start making my frame and then continue with our neon frame effect. For this lesson, you can use either the Pen tool to make your own design or you can use a shape. You're going to try with a shape. Go to the shape tool, choose whatever shape you like. You have a lot of options. Again, you can go in custom shape tool and just choose a shape that works well for you. But keep in mind that we're working with the stroke. If it's a shape that's all fill, we cannot really use. So I'm going to go with the Ellipse tool and going to hold down shift to make a perfect circle and just hold down shift, click and drag. Adjust the size, let go. Now our fill is turned off, make sure that's the same for you and our stroke is white. Then we're going to make the stroke larger because we want to see the outline for sure. 88.62 is good. You don't really need to change the sorry, not this. You don't really need to change the alignment, but you can make it either a dotted line or a dash line. That's fine. Close the properties. Let's name this just llips and then we're going to move it in the place that makes sense. You want to make sure that the circle is behind your subject. If my subject head ends here, I cannot put my circle here because this is going to just look really fake. Make sure it's behind your subject. You can see that the head ends here and I have this circle here, same over her arm. Now we want to make it look like the circle is behind her. We can do that with a mask layer. Go on the ellipse layer, go to this mask icon, hit it once, go to your brush, make sure it's on soft round. Adjust the size if you need to with a color black, let me zoom in and just start painting away until you guys can see that her head ends here, so we need to go before that. I'm going to just delete the rest of the circle. And just do the same thing. Already just by using a soft round brush and the mask tool, you can see that we made it look like we added a shadow effect on our ellipse shape. Now that we have it, you can change the position again. I'm not going to do that. I hit Control Z, and now we can begin creating that glow effect that neon signs have. Dabble click on your ellipse layer. You're going to get this panel. Let me bring it here so we can see, make it. I'll just put it here. Now let's go to Outer Glow, which is the sky right here. Click it once to check Market, go on the name. And let's see. We're going to first, I'm going to start from the top, change the blend mode to Color Dodge right here, then hit click away or just leave it B, bring the opacity to 100%, and we're going to leave the noise at zero, leave it white, make it softer, make the size bigger. You can see bring it here. You can see the preview here. We want the size to be bigger so we can actually see the effect. And once we're done, just hit Okay. You're not going to see much of a difference now, but that's okay. We're going to see it later. We clean the edges. We have our outer glow. You can see it here, like we said, we're not going to see an effect unless we add a gradient. Now on your base layer, not your original layer. Let me name this original, not on the original layer. Go on the adjustments, go to Gradient Map. Now you can see the glow, although it's not looking good with the white to black, go on colors and you can see the glow happening now. I like this. Let me see if there's other colors that I like. Maybe purple will work better. Let's see. Try and look for a color that will look nice. If you guys don't like you like the colors, but you don't like how it's looking, you can always just move things around. Let me see if you're moving these around, you're messing with the colors. Let me see which one works. I think I'll just go with the blue 27. I like the coldness of it. It looks cool as well. It looks like a club. But because our image is mostly dark, make sure it's darker to lighter. In our purple layer, if you guys like this, we got to switch the two colors. I'm just going to switch it like that. Now you can see that it makes more sense. Would have to make this color a little darker. I'm going to bring this here, lower the brightness. Let's see how that looks. You can see that it looks better. We can see our subject. Make sure it's darker to lighter and then adjust the color according to your image. I'm just going to stick with blue 27. Head once you're finished, and it looks a little pixelated, but once you zoom in, it's not going to look as such. Gradient maps are great because you can see how with just a few clicks we were able to create a nice effect. So my opacity is too high. I'm going to bring it to like 89 or just 90%. And there is our frame. It looks cool. I'm just going to bring back some of this circle. I think we remove too much here, go to color white, and just zoom in so I can see better, make the size smaller and just kind of make it look better. This the same thing for here. Just make sure you're not going over your subject because that would be obvious. There is our shape. It's looking pretty good. Another thing that you guys can do is to duplicate this layer. I'm going to Control J on our ellipse copy. Let's name this ellipse two. With the first one, I'm going to lower the opacity even more, maybe 44%. Then on ellipse two, go to your shape tool and just adjust the fill layer that's too little. If it was 88, make it 78. Or maybe 68, just work your way through the numbers and see which one looks better. I think this looks better. Let me try to change the size even more. I can just go properties here. 68, go to 58, and there we are. Close that and then go on the mask with the color black, soft round. I'm just going to brush the edges a little. Or better yet, we could just lower the opacity a little bit more. I will bring back the size. Don't turn off the link. We need the link, make it, I believe it was 88 and just just work with the opacities. You don't need to try so hard. This is 44, make this 80 or 90. Now it looks better. Now, if you want, you can stop here. You can also go ahead and make extra adjustments. I will go to curves, create a curves layer on top of all of my layer. I'm not going to limit it to anything because I want it to be an overall thing. I'm going to fade the image a little bit, or I could darken it if you guys want. It all depends on your image. I think I'm going to darken it like so and then I'm going to bring down the highlights as well. All right. Now if we think about it, if there is a large frame behind us, we would need some highlights on our subject. Let's go ahead and do that. Go to adjustments, solid color, make it color white, go to overlay. And enter once you're finished. Let's name this white. Go to the mask layer, Control I to invert it with your soft round brush and the color white increase the size. I'm going to have to first make a selection Homer. We're going to delete the layer mask. And I'm going to turn that off for a second. Go to my quick selection, select my subject in the way that I can, mainly focusing on the top part of her body and not the bottom part. Get her arm, can't really see her head. Se Photoshop can. And then I'm going to go with the minus and just remove this part. Let it do its thing. I'm seeing some stuff here. Let me turn up my gradients in black and white just Photoshop help me with the selection. Just bring it in a little I went out again. Let's go back with the minus and I'm going to use the brushes now because it's hard for Photoshop to see, hit Q and then with your brush, with the color white because we want these areas in our selection. We make the brush a little smaller and also work with the hardness. Just bring in my subjects hair. Hit Q again, analysis our selection, and turn these two layers back. On my color fill, I'm going to hit the mask. Now you can see that it's only on our selection. Now with the color black, we're going to fix what we have made, delete the parts that shouldn't have a glow on his arm, her arm, I guess it would not be on this part. Let me also smooth out those areas. I'm not sure if this makes sense. Let's try to make the opacity lower. Just trying to connect the two images. So the glow would mostly have to be here. Let me bring that color back and also here, delete this part in the middle. Let's try changing the um overlay was the best thing. Let me just enter. Now it's making more sense. We have a glow like we're supposed to have to enhance the glow. I'm going to make a new layer. Let's name this white name this white. Again, with the brush, the color white, I'm going to dab a little white dots here. And then change the blend mode to overlay again, lower the opacity, just so we are creating a gradient with the color black, remove that white from the wait, I'm coloring with the color black. Just make a layer mask and then use the color black to remove it from the outside areas. When we zoom in here, it shouldn't be on her head as much. I'm going to remove it from there and then make the opacity lower. In the color fill, I'm going to reduce the thing here. We can also add more gradients. You guys can stop here. I'm going to add more gradients. I want a Sci fi Look, which would you normally include maybe greens? Again, make the darker first and then bring the lighter second. Should I go with this? Hmm trying to figure out which one will look better. I think purple would work best. So go to purple and just scroll through to see which one looks better. And let's try to make this a little darker. Okay. Is it okay? Change the blending mode to overlay. I think this looks more sci fi compared to what we had before. Let me see. Should I bring it on top? Let's bring the gradient maps on top of our ellipse layers. Well, actually, let's not do that and remove the glow. Let's see. Bring this grading map to over all of our other layers, and that's looking good. Let's kind I'm going to keep that. Lower the opacity a little more. I think it's way too intense. Just working with the opacity, see what works for you. And we're finished. Go on the top layer, the base layer, hold shift while you do so, Control G or this icon. Let me it on screen, this was the before, and this is the after. It's a fun little thing that you guys can practice with. There's a lot of other images that you can use. I could just be a coffee shop, a table with no human subjects, see what works best for you. This was it for this lesson. In the next lesson, we're going to see other styles that you guys can use to enhance your images and make your social media pages a lot cooler. I will see you guys in the next lessons. 13. Removing Subjects: Now, sometimes you may find yourself having a great image, but there's some subjects that you would like to remove. Or maybe you want to repurpose an image like this and turn it into one where there's only this main subject in purple so that you can put some text here and other materials. So we have these two images, and they're available for you in the resource pack. The first one is very easy because he is separated from the subjects that we want to remove. Whereas the second one is a little bit more complex because our subject is at the center. There's nothing around the subjects that we do want to remove are exactly behind her, so we need to do a good job of separating her from the people in the back. So these are two common scenarios that you're going to deal with when you're working with Photoshop and any sort of photograph. And I hope that this lesson will give you the foundations to apply to any other scenario. So first, let's begin with the easier example. I'm just going to duplicate our layer, make our image full screen with Command or Control zero, and the easiest way to remove a subject is to head over to one of your tools. I'll go with the selection tool, grab that layer, and then simply select on Select Subject. Now when you go on this drop down menu, you have the option for it to be processed on your device or on Adobe Cloud. If you choose Cloud, it's going to be a lot more detailed. But device will limit it to the amount of space that you have on your computer. So go for the Cloud version and then select subject. This is going to focus on the main subject, but you can see that it did still grab the people in the back. Now, with the recent Photoshop updates in 2026, AI is integrated in all of the removal tools. We also have generated fill. So together, you can easily remove a chunk of your image while maintaining the composition. So I want to remove these people, but I do want the railing and the wooden floor to be continued in their place. So just use your Marquee tool, grab it, and then click on Remove. So this is using AI right now. Of course, you could use the traditional tools to remove the subjects, but that is going to take a lot more time. So let's see the result of the removal tool. You can see just instantly our subjects are out of the way. So this was before, this is after. And the good thing about the AI tools is that they're going to create a new layer. So if I changed my mind, I could just delete this layer and see basically what Photoshop generated. If I do the same thing again, we're going to get a different layer. So maybe this time, I wanted my selection to be more close to the subjects rather than one square. So I could just select to the Object Selection tool, have Photoshop, you know, look at my image until we can see these pink overlays. That was the first subject, second subject, third subject. We can easily click on one, hold down Shift, click on the other subject, and even use the Quick Selection tool. So you can use whatever you see fit. The goal here is to get something more detailed rather than one giant square. I am holding down Shift while I'm doing this, so we're on the plus, not on the minus. And when you click on Q, you want to make sure that all your subjects are in there. We can see that we missed his hand. So we want to go in with the shift again and grab that area. Now, we have the selection, but it's kind of bleeding into the subject. If I zoom in, you can see that it's missing like a blurry bit of the subject. So if we end up removing this current selection, we're going to be left with a halo. So with this selection, we can go to select, modify, and click on Expand. We can decide on the pixels. I'll go with, like, five pixels, and you can see that we're now going basically adding to our selection, we're growing it by five pixel. We're going to need a little bit more. I think I'll go for, like, 20. So now we have everything within our selection, and we're not going to be left with that. With this current selection, you could do that remove thing again, or you could switch to generative fill so that Photoshop can use Firefly to put something else in their stat. So maybe you want a little cat to be there instead of these three subjects. I'm just going to go with remove. And the better approach for that cat example is to remove that subject first and then generate something on top of that remove layer. So something over here rather than trying to do two things at once, because if it gives you a result that you're not happy with, you would have to do a lot of editing. Here we can see that we did get rid of the subject, but we still have that halo. So that just means that I need to go back and further expand my selection. So you can see why it's really cool that we have this additional layer. I could always go back, make my adjustments and come back. So let's go with 30 pixels this time and then click on remove. Just make sure you're on that layer and not on this layer. There we go. I got rid of my subjects using a different method. If I bring them both of the remove layers, I'm going to put them side by side. We can see the difference in the removal process based on the selection. Whether you do a square like this or something more detailed, you are still going to get a good replication of the textures and whatever background that your image had. Let's control Z, make sure they're in the right place. And now our subject is sitting all alone without anyone in the background. But like I said, this is the easier example because this subject does not interact with anyone in the background, whereas the second example is going to be a little bit different. So, again, we're going to unlock our layer. And using whatever method of selection you like, we're going to select our subject. So now we have selected our main subject, a person in focus. But because we have some hair and we have some smaller details, we want to go to Select and Mask first because we have to do a little bit more work than our previous example. First thing is the hair. When we zoom in, we can see that there's some, like, imperfect lines. And to fix that, you can easily click on refine hair. So you can see it introduced a little bit of the background to bring in the little hair strands. And a lot of times it may not do a perfect job, so we still have the option to refine this further. So the refined edge brush tool is made for details like this, whether it's hair, fur, the bush or something, something where there's fine lines at the edge of that subject. So with the minus because I want to remove the background, I'm just going to go in and let go once I'm done selecting. You can see that Photoshop is going to analyze that image again and exclude this hair strand because that's what we're trying to keep here. Same thing here. There we go. And then we have some stuff at the top. If you want to bring something in, easily go in with the plus tool. So this guy we need it in usually Photoshop does a great job with smooth lines like shirts, arms, legs. The part that it may struggle with is the hair, as I said, so make sure you zoom in and check every detail as much as you can. So click on Okay, and now we have an updated selection. Now, you may be wondering why I selected my main subject instead of the subjects that I wanted to remove. The problem with that is that while we're trying to remove the background, we may remove this main subject because they're interacting. It's always a good idea to make a separate selection of your main subject and keep it on top in case we do mess up details from her. We are just going to make a mask and have her separated like that. I'm just going to duplicate and keep our original image at the bottom. Now, whatever removal process we do, it will be between these two layers, and I could easily make sure that my main subject is fully intact while I try to remove all those people in the back. Let's hide this subject layer. I'm just going to call it hide that layer, go to the main layer. And we're just going to hold down Control or command and click on that mask. Now we're going to invert this selection because we're trying to remove everything else but her. So that's going to be command shift I or Control shift I on Windows, and you should see the marching ants at the edge. When you click just like that, and now we're going to click on remove. I should have made another copy. Let's do that. I'll call this the removal layer. Once again, command on that and then Control Shift I, command shift I, and simply click on remove. And there we go. The background is completely removed. And if I bring the subject layer back, you can see how that really helps because details from her hair is removed from this original image. So that's why I want to keep that in there. And essentially what it did is that it removed the people, but it actually ended up changing the background completely. Now, if that's something you're okay with, you can leave it like that. But this gives you the opportunity to now put this subject in front of a different background. So right here, it looks like she's at the beach, which is fine, and it works well with, you know, her outfit and the image lighting. But like I said, you could put something completely different in the background. Combining it with our subject layer, we now have a clean selection of our subject. And there we have it. We now have our subject separated in two different scenarios. And no matter which scenario you deal with, you know exactly what to do. Again, if you don't want to use the AI tools, we have all the original tools still there. So you could make different masks and make your selections, refine them. But if you're in a rush or you want something very detailed, the integrated Adobe firefly feature is really helpful, and as you saw, it's very clean. It comes in handy whether you have an easy scenario or a harder one. 14. Replacing Skies: When it comes to replacing skies in Photoshop, we have two options. The first one is the manual replacement where we select our subject, change the background, and then blend the two images in. But the second option is the Sky Replacement tool that's built in Photoshop. So in this lesson, we're going to check the manual version, and in the next one, we're going to check out that tool, which is a faster way of achieving what we're going to do here. There's two images that you can download from the resource pack. We have the Eiffel Tower, and we have some smaller details that we need to mask out. And we're basically going to replace this boring blue sky with this cloudy sky. So you can see that the color hue is very similar, and I just need to do a good job of selecting and then blending the two once I have those selections. So first, let's start with our main layer, the one with the subject. I'm going to make a duplicate as always when it comes to removing the sky, you have a couple of options. As we saw the AI one didn't really work out. But instead of just grabbing this selection tool and trying to make a big selection, you can utilize the color range option because we're only trying to remove blue instead of anything else. So the good thing about this image is that the background is very solid and it's very easy to remove. Head up to select. You could select Sky, but the reason why I'm not doing that is because let me just flip the selection and make a mask. We're still going to get this halo around the leaves, and, you know, it even missed some areas at the bottom. So that's not the option we're going to select. Instead, we're going to go in with the color range. Click on the color once, and in here, you can see exactly what is being selected and what is not. So black means not selected. White means selected. And you could use the fuzziness slider to photoshop determine how much what the range of that blue should be excluded Included. So we can see right now that this little section that the first tool missed is now being included. So we just want to go somewhere around 133. You can invert the selection. So now we have everything but the sky, and that's exactly what we need. So click on Okay, and now we can make our mask. So you can see that this is a lot more clean compared to what we had before. Now, it is still missing out, basically leaving out a little bit of the sky, but this is not that concerning because it's kind of faded, if you guys can see by Zoom in. It's not flat. It kind of shows us the background, meaning that it's not like 100% opacity. So that's fine. We can work with that. Because we're going to have to blend this image into the new background anyway. We have our selection. Now we're just going to upload this image or just copy paste it and put it in that image. So unlock the layer, Commander Control C, Commander Control V, and there's the sky. And you can see that I chose a second image that matches the hue and the overall lighting of this original image. And that way, I don't have to spend a lot of time trying to blend it in later. So right now you can see that those halos, these guys, they don't really matter because my new sky, you know, is perfect for this image. And I don't need to do a lot of adjustments. Now, if you did want to do some adjustments, you can easily make some things up here. Maybe we could go in with color balance, cut out some of that blue that we have, make it summary, and fix that greeny color it has and continue building upon this. We can even put a general filter over the whole image, which is a very easy way to try to make the image look like one. But so far, we have achieved the main goal, which was to replace the sky. So as you saw, it wasn't that difficult. I'm going to bring that layer back. So this was our original, and this is what we have now. So this was the longer way of trying to replace skies. As you saw, we did have to make mask. We did have to clean it up, add some adjustments on top. But in the next lesson, we're going to check out the Sky Replacement tool, which is a dedicated tool for replacing the skies. And I'm going to try it with the same image and we can see what the difference is going to be like. 15. Sky Replacement Tool: Alright, we are back with the same image. We're now going to replace the sky using Photoshop's built in tool. So duplicate your layer, then head up to edit Sky Replacement. So it's going to first analyze the image, and now you can see that it understood where the sky is. And now on this panel, I just need to decide the sky and then all the adjustment tools for blending that image in is already here. So I don't need to do any separate adjustment layers. When you click on this little triangle, we're going to get different skies and they are categorized based on what they are. So given that we want a blue sky, I'm going to go to the blue skies collection. Clicking on each one, it's going to give me a preview, and I could just go about choosing the perfect sky for my Eiffel Tower. So I really like this one. And then down here, you could decide how zoomed in you want these previews to be if you're having a hard time seeing them. And if you wanted to upload your own Sky, you can easily do that by clicking on Get More Sky. So you can import the image from your computer. You can download free skies from Adobe, Import presets that already exist, but the easiest one is to just grab the first once I have my sky, I could try to blend it in. So the first option, the first slider is the shift edge. So that's basically adjusting the selection that Photoshop made for you. So we can see that if I go to the left, I'm going to be removing from Photoshop selection and I'm bringing back the original image. If I go all the way to the right, I'm bringing more of the new sky into the old image. So you could easily use this feature if you feel like Photoshop missed some details. So for me, I'm going to go to 41. Then if the edges are too harsh, you can fade it. Fade edge is going to fade it the more you add and if you go to the other way, it's going to basically keep the lines very sharp. I'm going to go for 16. Next thing is the sky adjustment. Whatever you do in this area is going to be applied to this image, so not our original. We can decide on the brightness of the image and then the temperature. So I'm going to go for a little bit of brightness and some warmth to the image. And lastly, we have scale. So how zoomed in do you want that sky to be? So, you know, I could zoom in to one area, zoom out, which is not really gonna help. But usually what Photoshop selects for you is okay. So I'm just going to keep it like this 183. You can also flip the image if you want a different side to be in there. So I think right now we're on this side. Similarly, we have foreground adjustments. The foreground is your image, and we can decide on the lighting and, of course, the blend mode. So now, the first thing is the blend mode of these adjustments. We have multiply, which is burning those adjustments into the image, and then we have screen where it kind of dodges those adjustments. So it's just a matter of those adjustments being bright on top of your images or being dark on top of the image. Usually you would want to go for multiply and then decide on these adjustments. So you can see that right now, though this is a foreground lighting, it's getting darker the more I add it because we're on the blend mode that does the opposite. So the more you add, the darker the image is going to be. But if you switch to screen, it's going to be the opposite thing. And if I try to make it very dark, for screen, it's going to look normal. So use these accordingly, and then we have the edge lighting. That's the edge of your selection. Then we have color adjustment. So do you want to be warmer, cooler, you can make those adjustments here. Finally, we have output. Do you want this to be a new layer or a duplicate of what you have? Usually, I go for new layers, and that way, I could always go back and make a new one. On the left panel, we have the Move tool, so I could manually move the sky. Then we have a selection tool, which is similar to what we saw in Select and Mask. If you felt like deselection is not good, you can come in and make those adjustments yourself. Then we have the hand tool for moving the canvas around and finally the Zoom tool. These are the same as the ones here. Preview allows you to see a preview, and once you're finished, you can click on Okay. So now we can see that I got all of these adjustments done from this one tool. So before, after does a pretty good job. And this way, I didn't have to go in with the traditional tools to make my perfect adjustments, blend it in and all of that. I could just leave it up to Photoshop to detect my subject, take out the background, and replace it with a better sky. 16. Object Color Change : Analog and you notice a couch that comes in different colors. But then when you look at the catalog, it's the exact same couch, in the exact same position and the image is taken from the exact same angle. Then you can see that they use that to show the different colors of the couch. You might have wondered how did they recreate this photo maybe seven times? Wasn't it hard for them to keep the same angle, keep the same position and all that. But the thing is that most of you probably realize this, but that's just photoshop. And there's no way that they can actually keep that couch in the exact same position and take the image from the exact same angle, make the cushions look the exact same with different colored couches. Conclusion is just one singular image, and Photoshop was used to change the color of that couch into seven different colors, and they were exported as separate files and put onto that catalog. Those images weren't taken seven times, it's just Photoshop. That's what we're going to learn about today. We're going to learn how we can change the color of objects. We have several examples. Here we have a couch. After this, we're going to do maybe mugs, dresses, and just different materials and different surfaces. You guys can know what techniques you need to use to change the color of objects. And just make sure that you keep this in mind, when you have a brighter color, it is much easier to change the color. What that means is that if you were to dye your hair, you are a person with black hair, and you want to change your hair color to red. So what you have to do is to first bleach your hair, make it lighter, and then proceed to make your hair red. It's the same thing here. If I had a black couch, I had to first make it white or a brighter color, and then I can make it into, let's say, blue. But if I have a white couch from the beginning, I can easily just change the color. The thing is that it's the same logic for hair. I'll use hair again. If someone is blonde, they can make the dye their hair red easier than if someone's hair was black. So just keep that in mind when you are editing, it kind of helps with the process and the thinking so that you don't skip the bleaching part. All right. So we're going to start with the couch. We have this simple couch against a white background, and we're going to use different tools to select and mask out the couch because we don't want to change the color of the parquet or the wall and not even the couch stands. So before I start selecting it, I'm just going to make things a little easier for Photoshop because I will be using its tools. So I might as well make it a little easier. First, I'm going to I have already unlocked my layer. I'm just going to make a copy, turn off layer zero, name this background. Just in case I will need it. On background, just make a brightness and contrast. Layer. You guys don't have to do this. If your backgrounds and the color of your couch are not similar, you can just skip this. I'm just going to lower the brightness. Then I will merge the two layers. Now it will be a lot easier for Photoshop to detect the edges. Like this than if it were like this. But again, you guys can just skip this step. You don't need to do it if your background color is different. On the couch layer, go to filter, sorry, go to select, select and mask. And you will be brought to this panel. If you're not seeing the red, go to properties, scroll to the top until you see view mode. Change your view to whichever you like onion skin. And there's so much more options. I like to be on overlay. You can change the opacity of the overlay, if you want and change the color as well. And we're going to work with the brushes that you see here. When the whole image is red, that means that nothing is selected. Everything is masked out. If I hit Okay, it will just be a black page as nothing is visible. With my brush, I am going to go in with the plus and just drag until I reach the edge of my couch. Now we are doing the exact opposite of what we will normally do. We are selecting the outside and masking out our couch. But then later we're just going to invert it. The reason why we're doing this is that it's a lot easier because the couch has so much details and curves and all that. But the wall on the floor, they're just really easy to mask out. So we're saving ourselves some time and just proceed slowly and let Photoshop do some processing before you let go and see it snapped into the right place. I'll go with the minus to bring back the edge of this couch. Again, with the plus, start from a corner. Just tapping, whoops, you may do this. It's okay. Just hit Control Z and just try to be a little gentler, or if it's not working out, just go with the minus and bring back the couch. And if your brush is smaller, the intensity of the effect is less. But if it's bigger, the intensity is more. All right. So I'm just going to use what we just said, the quick selection tool, the plus and minus to just select my couch. Just my couch, the white parts is red, or in your case, is masked out. So that it's not visible like this and then I'll be back so we can continue. I have selected or should I say mask out de selected my couch, and it's okay if the edges are rough, we're going to come back for that later. Once you have selected your object, the object that you want to change, as in you selected the background and left the object out, just hit Okay. And yeah, it okay. We're going to you can see that it mask it out, which just hit Control I to just bring back our couch. Now, below your couch layer, make a solid fill layer. Go on adjustments, go to solid color. Choose a color that will help Photoshop differentiate the edges. So I guess I'll go with this bright blue, choose a bright color. This is just our background color, and now we're going to go back to our selected mask. Just go to select, come down to selected mask. Now we're going to use the refine edge brush to refine the edges. Go to this refine edge brush and just start from a corner. Just use the brush to I would have to remove this area to again, roughly clean the edges. This will be a little difficult with kind of smooth areas. We usually use this for hair. But yeah, when I leave it here, I clean the edges, and now we will make some global refinements. So you can just smooth out the edges a little bit and also feather the sides. I recommend a lot, maybe like 1.3 pixels, add some contrast, and then finally I'm trying to come down here, hit Enter once you're finished or just come onto another part and we're going to shift the edge. Reason why it's changing is because it's processing the stuff I asked it to and shift edge. Waiting for a preview. It's expanding our selection. I'm not really seeing a preview right now, but it's fine. We'll just leave it at 40. Or maybe it's here now. It did make some expansion. I'm just going to do that myself. Just go to negative 1%. Now it's going to output to the same layer mask, hit Okay. I didn't make a new layer, it's in the same layer mask. Now I can just go ahead. And use my brush to make better selections because I have the color fill behind it, it's a lot easier to see than if I didn't. So you can see I can use it to see the edges a lot better and if something brown pops up or some detailed wall effects, I will know that I'm outside. I'm going out from the selection. I'm going to use the brush to just bring back some of these areas and then I'll be right back. There's my couch. It took a while but if you guys again had a image where your subject does not blending with the background, then it would be a lot easier to mask it out. Now we are going to feather the mask because we did make a new selection. G on your couch mask layer, this one, then hit the properties and where is the properties, I think it's reset it. There it is. And we're going to feather it by one pixel. Just a really small feathering. This feathers out the edges for us. We don't have rough and sharp edges on our couch. We want it to look as natural as possible. Now I'm just going to turn off, get rid of my color fill. Actually, I could just use this go on top of your couch layer. Let's name this color. Now you got to choose what color you want your couch to be. I will let's make a new one. Bring back the layer zero, hold down Control and press on the couch mask layer to select this. Then go to adjustments solid color, choose your color. Let me try this. Let's try red. Going to hit Okay. Now let me name this to color. Change your color layers blending mode to color. Right now it's looking too bright. That is because we need to adjust the color. I think this makes more sense. Just experiment with the colors. If you come down, it becomes darker. If you come here, it's brighter, choose any color that suits you for red. I think I like maybe this color. So, there's my red couch, just like that. You turn it off as just a regular couch. Right. You can also just go in with a brush. This is something really silly. You don't need to do this. I'm just trying to show you guys the options that you have. Again, hold down Control on your couch mask layer, make a new layer. And if we go with right click on gradient, let's make a gradient. There will not be a couch with gradient colors, but we're just testing it out. Choose a gradient and just click and drag. All right, change it to color. It's a cool couch. And you can also change it to overlay. Whichever works best for your couch. Now we have a cool little unicorn couch. You can see how easily we change the color, I just deleted my layer one. If I want different colors, just control your color layers. I'm going to bring this one change them one by one. This was red. Let's go for a blue, a blue couch. Although I need to adjust the color to make it realistic or to the color that I like, I'll go with this, okay. On the third one, let's choose a third layer. Let's make a yellow or actually this color is nice. Stick with this. If you were to make a catalog for your couches, just make as many color fill layers as possible. Export this, then you can export this, export this and even this grayish color. So yeah, that was how you changed the color of object, a couch in this example. Let's try another example. This is another example. This is a mug, and you can see that the materials different has a shine to it compared to our couch let's see how we can change the color of a object like this. Unlock your background layer, Control J, name this mug and on top of Mug go to select selected mask to mask everything out, sorry, mask out our cup. Let me zoom out and then go with a quick selection tool, the plus and start painting away All right. Now, you can see because we have a background that's darker than our mug, it's a lot easier for Photoshop to detect those areas, whereas in our couch layer, it was a little difficult because the couch was white, the background was white, too. Not only that, the couch had details similar to the wall behind it. So if you want to save yourself some time, just try to choose images that are easier to change the color of. But if you don't have a choice and someone gave that to you and wanted it done, then you just have to spend some time to make it perfect. You zoom in here. Actually, I could just do this with the brush. Yeah, I'll just do it with a brush. I selected everything that I want to change the color off and hit Okay. Make sure output is to layer mask. All right now we have a selection of our mug. I'm just going to turn off our layer zero and invert my mask layer by holding down Control and pressing I once. And now I can go and start painting. Now, in these cases, it might be a little difficult to know where you should paint. You don't know if you should go this way. How big should your brush be and all that. This is another thing you can do with layer masks, go to your layer mask and then go to properties. I'm going to reset it, go back to layer zero, come back to the mug layer mask and reduce the density until you start seeing the area that you're trying to bring. I'm choosing 31%. Close that. And now you can see that the mask is kind of grayish now. Go with the color white and just start painting back the handle of your mug. All right. Let me zoom in. I can't really see that well. All right. Um going to look at the other places. We also have a spot here that we need to clean. I'm going to clean that with the brush hard round, black and white, and I'm just going to change them as I clean the edges. Then I'll be right back. I cleaned the edges as much as I could and now we can go ahead and start adding our colors. Hold down Control or command on Mac, press on your mask layer until you see this, the marching ants and then go to adjustments solid color, choose your color. I think for a MAC like this, let's try a purple Then change the now that I have the color, I can see that I need to fix this area. It's on the mug, actually. It is a little rough and the thing is that once you change the blend mode, it will not be as rough as you see it right now. Change the blend mode to color. Or overlay, whichever works better for your object, color works better for me. Then you have to go back to the colors and just change I changing? I'm changing something. Change the purple until it looks good on your mug. Actually not liking the purple. I'll go with this green. I like this green better. Yeah, just work around until you're happy with the color, hit okay. Let me call this color. You see that it preserves the shine and everything and also the text. But with mugs, the top would be white, right? So go in with your brush, soft round and just remove the color from the top part. That's just how mugs are. The tops where you sip is white or another color. It's not the exact same color as the part below it. Bring back the background layer. There is our mug. Really easily done. We didn't have to spend that much time because we had an easy image to mask out. Now let's look at another example. This is a dress. Again, it's white, it's easy to change the color of. But because our background is also white, we might have to spend more time on it. I'm going to unlock my background layer, make a copy, and now I will go to first I want to see what that is. We'll just let it be. I'm just trying to change the color of her dress. Now go to your background layer. Let's name it background. Go to your background layer. We do select, select and mask. Do what we have been doing all this time. Let's see if this will be easy or will it be hard? I'm just trying to remove the parts little by little. Oops, I just removed everything. Bring it back and make sure you work slowly and you don't rush things or else Photoshop will be confused. Let's try to remove her arm, I forgot there. Let's remove her arm, and then we'll be finished with our selection. Kind of lagging. There it is. Let me zoom in, see if I can get her hand out. Okay. See if we can do the same here. Alright. There we are. Is that her dress? We'll just fix that with a brush. All right? Now I'm just gonna hit Okay, output to layer mask. And I'm going to turn this off, control eye on the background layer and just remove this part of her hand with a soft round brush and the color black. So just lightly remove her dress, her arm, actually. We also have another part here. And we don't need to clean much. The selection was pretty clean, so just zoom out and make a selection from the mask layer. Control, click once, solid color. Let's give it a pink color. Change the blend mode of your color layer to either color or overlay, depends on your image and object. And let me bring back our model. I'm not liking this color. After seeing it with the model, I feel like it needs to be a little darker. Maybe I'll choose a different color. Oh, I like this. I'll stick with this, it okay. Now I have changed the color of her dress. Let me actually choose overlay because we have shadows, and you can see the light reflection overlay works better on this object, her dress, and I'll just go with something like this. Alright. We changed the color of her dress just like that. Now we have one final image to change the color off. I have this final image that I'm going to change the color of her coat. I chose this image because it has patterns and I wanted to show you guys that it doesn't matter if it's not a flat solid object. So just duplicate our layer like we have and go to select and mask on your layer. Then using the minus start from actually the plus, sorry, we were doing the opposite, I forgot. I can see it slowly finding the areas. Looks like a contagious thing. It's processing. Just make your brush bigger if you see a spot like that. Go in with the Zoom tool and we need to bring back her sleeve. Again, quick selection, minus and just click once on the areas until Photoshop detects the area itself. Come up here and we have this sleeve as well. We will clean that. Let's see if we can do it here. It somewhat did it. Now we have her shirt. We don't want to change the color of her shirt. Go with the minus or the plus. I keep going for the opposite. Single click on her shirt. Whoops, Control Z. We'll just do that with a smaller brush and just Okay, it does not work that well. Let me try single clicking. Okay, we'll just do it with a brush. It's fine. It Okay. I'll put two layer mask. Zoom out. Turn off layer zero, invert your layer mask, and then go with the color black and just start painting away her shirt. First, I'm going to bring back this part of her color. I will actually use a hard round, maybe add a little bit of remove some of the hardness, and the color black to remove. I'm just going to remove all of those areas. Going to do that, clean everything out, remove parts of her hair, and then I'll be right back. So we will do the exact same thing. Control, press on your mask layer, adjustments, solid color, choose any color you like. Let's stick with yellow and then go to overlay. And if you look at color, just see which one looks better. I think color looks better for me. Just to dabble click on the color to just make more adjustments. Maybe I want it to be I'm not liking the vibrant yellow, but let me see how it will look on her. It doesn't look bad, actually. Let's just stick with the yellow. And now I want to change the color of her laptop, her pen, and her mug will be a little difficult. Let's just do her laptop and her pen. So it's like she's setting her workspace is matching with her outfit. She is a really cool flex. Just go make another a wire. This is easy. You just go in with the Quick Selection tool and just select the laptop. You don't need to go in the mask thing that we went to a couple of times, hit Q if you need to bring in anything that Photoshop is not detecting. Again, it doesn't have to be perfect because the blend modes do a great job at blending things in, mask it out and then make a selection at Control and then press on that one, go to color fill, and we are going to I'm just going to double click on the first image, copy the code you see here, and then I'll copy that onto the laptop back, and then we'll just change the blend mode to color. It's the exact same color, but it's not looking the same. I think it's because of different surfaces and colors. But I will just try to change it up a bit so I can at least try to make it look like that. Then we're just going to hit okay. All right. Let's name the layers so we don't confuse anything. This is laptop, this is code. And finally, we have her pen, go to the pen, and this is easy too. Just to make another copy of your layer zero and get the quick selection tool and we can just easily select the areas using the tool. Here because everything is blurred out, you should use the Q and the brushes to bring in parts of the pen. I'm going to lower the. Actually, that's a brush. Never mind. Is this the right part of the pen? I can't quite tell. Let me make my brush smaller. We'll just clean it later if needed once we choose our color. I'll under the top part. We don't need to change that. Q again and then make a layer mask. Keep it that way. Again, hit Control, press once to make a selection, go to solid color, and it's going to keep the same color. Let's paste the code and then go to let's go to so you can see that actually color is better. Go to color. Zoom out. Let's double click to try to match the code and the laptop. All right. And there we have it. We have made her look as if she has matching laptop, pen, and code. It's really cool. Let's name this pen. Now let's look at it before and after. Just group everything together. This was the before, this is the after. Previously, she had pink, now she has yellow. That was how you can change different objects and different materials using Photoshop, which is some few selections, masking and blending modes. It's really easy, and it will be something that you will need to do quite a lot. Sometimes, like we said, you have the perfect image, but the models dress is not quite matching with the background, so you will have to photoshop it or maybe a a sunglasses frame or a glass frame is not matching with the models shoe, doesn't matter, anything you like. You can easily just change the color using the techniques we learned today as you saw, it was really simple and you will be using this a lot. 17. Class Project: Edit Your Own Photo: Now it's time to take everything that we have learned and apply it to a photograph of your own. For your class project, I would like you guys to do a complete photo edit in Photoshop. Start by choosing an image that gives you something interesting to work with. This could be a portrait, a landscape, a product shot. Once you have that base image, you can decide on what needs improvement or transformation. Try to combine several Photoshop features rather than relying on one. Use layers and adjustments to have more control over your work, make careful selections when needed, and pay more attention to the smaller details that can help make the edits more convincing. Most importantly, try not to recreate the edits in the course, but rather something of your own so that you can have more hands on experience. When you're finished, you can upload the project to the class project gallery. I would also recommend uploading the original image or a collection if you did a composition, just so you can see how far you've come and what your process was. Speaking of process, you can include a little description about that, which tools you use, what you found challenging, and what you want to do in the future. Good luck with the project, and I look forward to seeing your transformations. Mm hmm. 18. Congratulations! What’s Next?: Mm hm. Congratulations. You have reached the end of the course. We have covered a lot in this course. A big part of editing with Photoshop is to be able to look at an image and see what needs improvement. That analyzation part is going to get you very far with this program. Sometimes it's a complete transformation, and other times it only needs a few adjustments. So keep working with your own photographs. The more you edit, the more you're going to naturally gravitate towards the right tools rather than rethinking and thinking your steps. If you haven't already, be sure to upload your final edits to the class Project Gallery. I would love to see your before and afters and understand your workflow and process. If you enjoyed the course, please consider leaving us a review as it really helps us improve our courses for future students and for you. Thank you for joining me and following me all the way to the end.