2-The Most Common Sewing Machine ISSUE

1. Hi there!: Hi there. My name is Marcy. Through all my years of teaching sewing, there is one issue that continues to occur. And sometimes even after learning what the issue is, people will still haven't happened and experience so much stress that they still believe that they have to take their sewing machine and have maintenance done on it, which can cost you $100-150 nowadays and is actually very unnecessary if this is the issue that's causing trouble. So let me show you how to fix it and save you some money. And save you the stress of what happens when you experience it. If you're a beginner, it's going to probably happen. Eventually. You learn it now, then it will save you money and save you stress later on. So let's get right to it. 2. Projects: I think that the best project after doing this video would be to make yourself experience what it's like when you loosen the tension and you make the big loops happen and you hear the noise. And you get familiar with it so that it doesn't stress you out when it happens. So I really like to see that and I'd like to hear what you felt about when it happened. And if you feel confident that next time that you will not be bothered by this, it will be muscle memory experience for you. Where it kind of gets into your brain, kind of sinks into your brain so that you don't freak out when it happens. Make yourself experienced this. And tell me all about it. 3. Good Stitches: I would like to note that the upper thread is pink and that the bobbin is chartreuse green color, yellowish green. I will now show you when we saw the fabric, which is white, where each of those threads will appear. I'm now going to show you what the stitches look like when the tensions are working well, the upper and the bottom are in sync. This is the upper tension, which showing no loops on the bottom. And the bottom tension showing no large loops on the top. Now I'm going to show you what it's like when it's going to make you crazy. 4. Loosen tension : Generally speaking, a normal tension on a machine is about three. And in order to get loops to happen on the bottom so that you know, the whole process and how it affects you and how it feels. We're going to lower the tension to about a one. I tried before, maybe a two and it didn't quite work. So I'm gonna go all the way down to a one. That's where we're surely going to get the issue to arise for us to practice. Alright, let's try it this time. I hear it. Oh, something's wrong. Let's see. Oh my goodness, you see that? Look at this. Something majors wrong with the sewing machine. But you know what I did, I just listened to tension. So when that happens, now we're going to tighten attention backup and watch it go back to normal. See how crazy that looks. It's very stressful. Quite stressful when you get it to look like that and you have no idea what it is and you think I have to take it in for them to fix it. Now let me show you one more thing that can happen. Seems that everything is okay, right? Then there's a little surprise. Now this time. And we didn't hear that really stressful sound that you might hear with some machines. But you may continue sewing thinking everything's okay. Only to discover that on the bottom. Now have large loops indicating that the upper thread tension was too loose. 5. Clean up threads : Before I go to fix it, what I will do is I'm just going to double-check under the bottom to make sure that some of those loops didn't get caught in the bottom and cause any thread to get stuck in there. Just remember, remove the needle for safety. So you don't poke yourself. Just loosen it till the needle comes out and then slide it down. And by the way, needles only go into each machine the way that they're made. So the flat part, the flat part on the back, will only fit in one way. You can't put the needle into your machine the wrong way. It just won't fit. And it doesn't have to be super tight. When it goes back in. Don't crank it so that you can't get it off. Just a little note. Presser feet come off, remove them. Then you can open the bottom with the little screws, the screwdriver taking off the plate and making sure there's no threat under there. If there was a piece that was having a hard time coming out, you would hold this thread, pull on it, and then turn the hand wheel back and forth up and down until it comes out. You'll be able to pull it out. Just like that. So I had a few little pieces in here that got stuck and broken off when I made the big loops. It's not a really big deal. They came on quite well. And then I will retry those sewing to see that the notes are gone. 6. Reset tension : Returned the tension to a three. And I'm just going to test it to make sure that the upper and the lower threads are connecting as they should. Looks good on the top. Looks good on the bottom. Actually, it might be a little bit too tight. I'm going to check it right. We'll do it right beside it. This side. See if it's better this time. Let me try it again. My Dr. fiddle with it. Sometimes. Just never know when you play around with the tension. I got loose and again, I don't know why that was Right there. Three looks a lot better. This one here. Instead of these two on the back, it looks much more even. So you don't see as much pink on there now. Which means that this was a little bit too tight or something wasn't quite right yet. Looks better. 7. Are you relieved?: Well, I hope that was fun. I think it's always really fun when you can learn something that will prevent you having stress later on. Especially if you're beginning to learn how to. So there's a lot of stuff that you need to learn it. You'll be able to say, Oh, I know that it's a breeze. Then if someone, you know, goes through bacteria, we able to say the same thing like, Oh, don't worry about that. You're saving them money. So they might take you out for lunch or something. I think it's great to share because it's always fun to learn something ahead of having an issue about it, right? If it happens now, you won't be worried, you won't be stressed out and hopefully it can be shocking, just the sound of it. And also if you're really eager to, so you're into it. And then it's kind of a drag that it happens, you have to stop. And one good thing about the fact that the large, they're large loops, that you will be able to actually cut them away so easily. Then the threads will come away pretty quickly. That's another little benefit. Alright, so happy sewing, as I always say, and look for some more of my videos and also for my video is being improved. So I'm about to edit them and fix them and make them happy. So bye for now.