Wire Wrapping : Jewelry Making for Beginners, Tulip Pendant Project | Gopi Dave | Skillshare

Playback Speed

  • 0.5x
  • 1x (Normal)
  • 1.25x
  • 1.5x
  • 2x

Wire Wrapping : Jewelry Making for Beginners, Tulip Pendant Project

teacher avatar Gopi Dave, Wire Wrapped Jewelry Maker

Watch this class and thousands more

Get unlimited access to every class
Taught by industry leaders & working professionals
Topics include illustration, design, photography, and more

Watch this class and thousands more

Get unlimited access to every class
Taught by industry leaders & working professionals
Topics include illustration, design, photography, and more

Lessons in This Class

16 Lessons (1h 3m)
    • 1. Introduction

    • 2. Weaving Technique : Single Wire Coil

    • 3. Weaving Technique : 3x2 Weave on 2 Base Wire

    • 4. Weaving Technique : Bail Weave

    • 5. Weaving Technique : 2x2 Weave on 3 Base Wire

    • 6. Tools & Materials to Create Tulip Pendant

    • 7. Tulip Pendant : Part-1

    • 8. Tulip Pendant : Part-2

    • 9. Tulip Pendant : Part-3

    • 10. Tulip Pendant : Part-4

    • 11. Tulip Pendant : Part-5

    • 12. Tulip Pendant : Part-6

    • 13. Tulip Pendant : Part-7

    • 14. Tulip Pendant : Part-8

    • 15. Tulip Pendant : Part-9

    • 16. Final Thoughts

  • --
  • Beginner level
  • Intermediate level
  • Advanced level
  • All levels

Community Generated

The level is determined by a majority opinion of students who have reviewed this class. The teacher's recommendation is shown until at least 5 student responses are collected.





About This Class

Welcome to this Wire Wrapped Jewelry Making class. In this class we will create the gorgeous Tulip pendant.  This class is perfect for Beginners / Intermediate level. We will be learning all the techniques to create this pendant!! 

What will we learn :

  • We will learn to handle the wires and different tools.
  • We will learn the techniques of weaving over single and  multiple base wires.
  • We will learn to create the frame and the bail for the pendant.
  • We will hand form curves and create forms too get this gorgeous design. 
  • With these few basic skills and techniques we will create the beautiful -- Tulip Pendant --

I am sure you will enjoy this class and learn lots of techniques..


  • Students will need the necessary Tools, Wires, Cabochon stone and Beads. Watch the lecture titled 'Materials & Tools' to get a list of supplies required.
  • You need a desire for learning to create unique jewelry and some time for practicing the skills.

This Class is perfect for you if :

  • You are a beginner/intermediate with little / no experience in jewelry making
  • Beginner wire wrapping artists who are looking to experiment with various new styles.
  • All of you who want to take their jewelry making skills to the next level.

If you are an absolute beginner then watch my Wire Wrapping For Beginners  to start with. The Tulip pendant is sequel to the Aurora Pendant. So If you are a beginner the attempt the Aurora Pendant first!!

Let us start learning to wire wrap!!

Meet Your Teacher

Teacher Profile Image

Gopi Dave

Wire Wrapped Jewelry Maker


Hi, I'm Gopi. 

I am an architect turned jewelry maker based in artisan’s country India.

I have been making jewelry for almost 16 years now.I absolutely love jewelry making. 

Since last few years Wire Wrapping has been my focus for creating jewelry. I sell unique Wire wrapped jewelry and Wire Wrap Tutorials on my ETSY shop : ArtsvilleHandcrafted 

I started experimenting with wires and I realized that with wire wrapping I can make more intricate and more complex designs, I can manipulate the wire to create the designs I imagine.. Once I became a mom a few years back I started jewelry making full time. Wire wrapping relaxes me. It is a perfect outlet for my creativity. 

I have always enjoyed teaching so I finally started sha... See full profile

Class Ratings

Expectations Met?
  • 0%
  • Yes
  • 0%
  • Somewhat
  • 0%
  • Not really
  • 0%
Reviews Archive

In October 2018, we updated our review system to improve the way we collect feedback. Below are the reviews written before that update.

Why Join Skillshare?

Take award-winning Skillshare Original Classes

Each class has short lessons, hands-on projects

Your membership supports Skillshare teachers

Learn From Anywhere

Take classes on the go with the Skillshare app. Stream or download to watch on the plane, the subway, or wherever you learn best.


1. Introduction: Hi, and will be done on Zola handcrafted. I'm of either gelatin nico. Welcome to this jewelry making. I mean, engendering for a long time now. My focus of glasses will mostly be violative jewelry making. Allow experimenting with new designs, new techniques and use diets. Laddering is a very versatile technique Australian meeting at replies minimal amount of tools and materials. And using those you can create most intricate and very big game designs. In this class, we will learn to create this beautiful jewelry pending. It is an intermediate Livy class. If you're new, then make sure to watch the beginner's class. Introduction to write a clear dependent using single via technique. And the adult appending class. Mapping is a fun hobby. I am sure you will fall in love with this technique afterall. If you're ready, then let us type db. 2. Weaving Technique : Single Wire Coil: Let us now learn to coil over single beef Y0. We need six-inch long 18 gauge meets Y0 and 20 gauge peering via cool deviating Meyer and perpendicular to the left fade via Ang of maze while old formally at the intersection point of both wires and start to do it with the longer a handoff leaving via in clockwise direction over Pb file. So with each rotation, we have one view over the maze Y0. You can see a coil is being formed over the maze while keep pressing the weave together to get a closer view to security shorter. And I'm believing again over to the right side with the short time via Skype or whatever little bit extra time beyond untidy and routine multipliers. The end toward the back of the coil. We can press together with nylon joke life. Also, this tangles will be formed which need to be removed before it tightens. Dundee vial and again, continue to coil. Deeper stated a dump to get the best result. Keep pressing the reserves to make them as close as possible. The view can slide as the via is surrounding ship. So if could be remiss at derived. And we are to view the different latrine difficult to view from stay long of Ireland. So we slide the view to the left-side via angry read. Make sure the rotations do not get overlap. Untangled a weaving via before it tightens. Every few rotations. Plied the view to the varied and continue to view. The view has to be tight over the base via 18x dx traveling bio, bio and using gene loss gliders towards the back of the file. Now we will learn how to add extra. We've taken new piece of weaving Y0, got angry flush cutters and dark again to coil in similar manner. For a few rotations and tighten device and using chain of players continue to leave again for a few rotations. Now what we will do both the views towards each other and to update the views such that both side and meet to form one rotation of the wing. Guy tender points together using pliers. That will be difficult to say that we have added to the original coil. 3. Weaving Technique : 3x2 Weave on 2 Base Wire: Let us now learn the three by two views on these wires. We need two pieces of 18 gauge, around six-inch long, and three feet long weaving vial of train B. To start leaving via perpendicular to formally. Start by leaving Google via 143 rotations will secure the weaving via, via, via to match dead ends. And we will cover both trials for two rotations. To go down, come back up to the third of a rotation of weaving, continued to view. And similarly, three rotations, one to three rotation from one Vieux and rotations over 4123 rotations and via phone and go down one to do rotations on board YOU again, 123 rotation from one to two rotations on both wires. Continue to view. Keep pressing the reef together. After few rotations. Glide the view down to do that pulls in the opposite direction to weave together and continued to view again rewritten studies with them and keep gentle pressure on the weaving vial to get Becker design process and try and get uniform views as much as possible. Make sure that the friars do not get deformed. To weave together. At this point, we will cut the extra bio at the beginning card using flush per dose. But it's towards the back of the weaving. Movies, glided further down before continuing to view. To do that full divisors up from the other side. And continue to view. View for as many rotations as needed. Try to be as good as possible. Whenever NGO view over one bio photo few rotations at the back of a wire and will be secure. Our three by two V over two ways wires is now ready. Similar on both sides, front and back. 4. Weaving Technique : Bail Weave: Let us know London. Over these wires. We need two pieces of 18 digit on B's via succinct in land and a two feet of weaving viral. To start all the 28 gauge weaving bio perpendicular to buy a van. Nice file V42 rotation over via one to secure the weaving biota, the misfire. But as the weaves together, this can be done using apply advice. Now we will begin our weaving. Match the ants. Leaving wire down to the top of the P47 rotation over via bring the fire back up view for von tradition over put fires will fall one rotation over biota fun. This is fun tradition of leaving. So we will again go back up. The rotation over via two. Go back to the outer side of fire to PO4 fund tradition. Although put flyers for fun traditional or via phone or via one rotation over both buyers. Rotation or via one, go down to the top of fire, to the UFO von traditional of I2. And we have four van tradition overboard. Tobias, keep pressing the views together all the time and continue to view. But as many views as needed. This weavers similar on both front and back side. It is a very close V0, so it is perfect for beams. We can spread the virus to make it easier to view. Mean Dana steady rhythm by weaving to get the most uniform views possible and continue to view. But as many views as needed. As this is a close view, It's position cannot be shifted over. 5. Weaving Technique : 2x2 Weave on 3 Base Wire: Let us now learn that two by two v on three BCE wires. We need 3B flyers of fix hinterland, NO guaranteed cage weaving vial of three feet. Hold the ends together to get different of weaving vial. Please, to fend off weaving bio at defender of the forced B's via, called as via one. Now we will wrap for two rotations Hoover via one to secure the weaving bio. And via two. Now we will wrap for two rotations over via one and to come back up from between the two vials via three. Now we will have 42 rotations. Hoover via 23 are lying on the ends together, rep for two rotation. Second rotation go down two via one of a, one rotation of weaving, we will continue to view for as many rotations as needed. So V0 for two rotations, who's-who via 2.23 rotation come down to via one. We refer to rotations over via one. And to all of our rotations are counterclockwise direction v, u for two rotations over via 23, come back down to rotations. This is a repetitive process. Ipo, regular tension on the weaving bio to get uniform view. Keep pressing the weaves together. This is a view that looks familiar from front and back sides. As we think we can continue for as many rotations as maintain a steady rhythm to get a uniform view. And link a view, view photo feudal patients global, anything will bio. So we have even over by a photo few rotation. This is what it looks like. You can compress it to Ghetto. Contextual vibing Y0 and tighten the end at the back, the nose pliers to B1, the other side, we are going to rotate the bees wires. And now we will remove the initial view which we did on via one. Bring the weaving via Back to the via three, which is now our bottom bio. To start weaving view for patients Hoover via three and to come back up from the center of via 23, we refer to rotations over via 2N1. Go back down to via three repeat and similarly. So two rotations over via three and to come back up and view for two rotations over via 21 to end the weaving of V, V for a few rotations Hoover via three, so that both sides are symmetrical. This wheel can be used in various ways, as we will learn further. Protect, show bio anti tender and using chain of pliers. Hover two-by-two view over three backfires is now ready. 6. Tools & Materials to Create Tulip Pendant: Let us look at the basic materials required for the tulip pending. We will need three pieces of 14 inch long eating engaged around while 18 feet of grantee IEP gauge round, leaving via six-inch long piece off 28 gauge wrong. We will be using an overall cap is shown for this project, approximately sized, tardy MMA 20 MM. We'll be needing some needs of your choice to do 3m and afford MM bead. Vividly, the basic tools, the chain nose pliers, round nose pliers, flush cutters, and the 5M audibility making players. If you're allele, then let us start making that you'll abandoned. 7. Tulip Pendant : Part-1: In this lesson, we will prepare the bees wires for our pending. We will be doing two-by-two VIV on tree-based files to start big three pieces of B's via 14 inches in length, match their anchors and make sure to buyers are stripped. Now we will mark the center at seven inches on all three files. We will take a tree flip long weaving via of 28 gauge, all the ends together to find the center of the weaving Y0. We will start weaving from the center point. Take Y of one, please. The center of the weaving via the center of the base. While we will be doing two-by-two VIV on three bays, wires. Start by weaving over both wires for 12 rotations. Go down and come up from the center of via Environmental advisor three before two rotations on bio 2N, three on second rotation go down to the first trial and again, the PDA weaving rotation, the two rotations on Bio one m2 and two rotations. And via 2N three, keep pressing the views together and keep a gentle tension in the weaving bio at all times. Make sure the wheels are nice and uniform and there are no kinks in the weaving while the base wire should not get the form that any point while the smearing. So we did seven complete rotations of the two-by-two VIV on Freebase virus. And to end the weaving, we're leaving over via 344 to five rotations. This was on the left side of the center point remark on the base bias tighten device. I've got the extra weaving viral and that device and using pliers rotate the base virus. We will now be on the other side of the center of it. We'll start by viewing over via 23, which are now the bottom bios for two rotation. We will then V1 via van name2 for two rotations. Again, we will continue in the same pattern, two V 0.4.7 complete rotations on this side of the virus. You can even spread the base files just so slightly to make this process a little easier. So now that we have done seven Complete views on even the side, we now have 14 rotations of two-by-two views on tree-based virus. To end up living on this side, we are leaving on via three again, 4-5 rotations. Got the extra weaving via via n towards stop in our site. Have a base virus for dependent are now ready. In the next lesson, we will prepare the frame for dependent using these base virus. 8. Tulip Pendant : Part-2: In this lesson, we will create the mainframe for dependent using the bees wires from the earlier lesson to start database buyers and the cabbage and make sure the via three of the weaving is at the bottom and the backside weaving touches the stone. So please the viral in the center of the storm and start to go the virus or the Sloan formerly with the fingers and the virus using the pump. But I'm carving phosphate on the left side using my forefinger. Now I'm covering on the right side. We want to create a teardrop shape as such. So take your time to form this shape. The Via van de dop via will come over the stone and that is fine. That is how we wanted. The virus will intersect at the top. This is the kind of teardrop shape we are looking at just till you are satisfied with this basic shape. Now, we will mark the point where the buyers are intersecting on both sides. Though center point has to match the center of the stone roughly. Now, big Tobias call debased fires with pliers just below the Mach point and foil the vials up. Repeat the process for the other side. So holdover with the pliers and fall divides up the speed. We have a V-shape on the top. This has to be in the center of the weaving at the bottom. Now, whole, all six wires paddle to each other like this. We will take a four feet long and we will wrap around these six wires. So leave around one feet of weaving buyer to the right. And we will start wrapping on the left side. So we're doing complete rotations on all six wires with a dot and phi rotation on the right side and then from the left same file via the weaving till the end. So continue to weave all six virus for as many rotations as one feet off via will allow. At the end we will wrap over the three vials on the right side for three rotations. And we will end the weaving by vv for two rotations. So pass the vial from the gap between V1 and V2. I left early, shorter ended the spine. Trickier for me. Make sure the leaves are tight and uniform. Our basic frame for dependent is now ready. This is how it looks at this point, all the buyers need to be straight. In the next lesson, we will view for the base and the stone in this flame. 9. Tulip Pendant : Part-3: In this lesson, we will view on the bail and create inside the stone within the frame. We will continue to be with the weaving via we have already used. And we will VIV on the bottom to buyers Datastore via three on both sides. We are going to be doing the bail VM for the real, for Van rotation on the left side, Y0 go down to the outer side of the right side, while V0 for one rotation on the right side via, Go back to the outer side of the right side via and V0 for one rotation over both sides bias. So as you see, we will be spreading apart like this to create a broad Hui Lu Duan rotations of Bellevue with this much distance between the two wires. Make sure that these wire Bernard get deformed and the distance is uniform throughout. Keep pressing the weaves together to get nice clothes views. So this is how it looks like from the backside holder, base vial from just about the bivalvia ended the weaving and Folder wires up to meet them parallel to each other. We will continue to weave over the base virus again for 12 rotations all this time. Make sure that the distance remains even all throughout 12 rotations. I have kept around seven millimeters between two bays wires right now. If you will increase this distance, then you will get a broader bill and a fuel decrease this distance, then you will get ten. Now, that is entirely up to you. We are almost there. Only 1 third part for the weaving is remaining. One side whether patients are complete, we will again fall don't just from the point where we ended weaving called the base virus with the supplier and fall on the opposite side. So deck boat based wires will intersect each other. Now from this intersection point, again, for all the wires up to make them parallel to each other. We have this triangular shape. We will continue to real till this point where the wires are connecting. At roughly 12 rotations continue to real at all times. Make sure that the wires that DOP remain parallel and do not overlap each other. Do the weaving slowly, unevenly. Take your time while doing this as good weaving is important to get a good finished piece. If you make an error while leaving, then I suggest that you go back on the eve of your rotations and again start weaving. To enter weaving, weave or word anyone bio for two to three rotations. This will secure device and to the base via. They will cut off the extra via as we do not need it. Using pliers. Our weaving for the male is nowadays. Total length of weaving is around 1.5 inches for the baby. Now, we will set the stone and the next step, reverse the frame so that the back is facing. You eat suppliers hold just about dopamine to where we ended up leaving on these wires and fall inside or DAG or database created and the base file, this is again via three on which we are working. Repeat the step for the other side, hold with the pliers and fold inside. Today, per dentist created, these banks are the support or the base on which the stone will sit. Try and make them as similar to each other as possible. We will now place the stone within the stream. To do that, open out one of the banks and insert the stone Jan delivered under frame. These stones may break. Now that the stone as n-side at just the frames or the stone is set properly. Please start dent back in the position. Slightly pushed the virus inside even more. A good support is now created for us to do secure does don't even more bolder vial, one over the stone or the top fired over the stone. Our Stone has now set within the frame. It should not fall from its place. Now bypass donors set in the next lesson, we will form the bail and no more grieving over Adobe's fires. 10. Tulip Pendant : Part-4: Let us start this lesson by shaping our bail and then adding the three by two V on the remaining base wires for giving a shape to the bay. I am using a five MM, please. The novel right in the center of the weaving and fall the virus down. So Dyke gets a uniform curvature over the doorway. At the same time we want to bring the buyers are from this gap about the stone. To fold the vials and pass them from this gap to bring them towards you. Pull them gently. We have to maintain the code for the press down. Keep straightening the virus. Had just the position of the bill. The bill is now ready. We can press it to reduce the space between the beam. Now we will fall upon the remaining two B's virus on both sides. Straighten the vials and make sure they are parallel to each other. We will be doing the three by two reef over these two wires. So that is three view on one miao and two reuse on both wires. So we will be doing three views on the outer side via and to reuse county in Ohio. To start the weaving ticker, four feet long, bio unsecured leaving via my leaving for three rotations over the outer bio data's wire number two. Then b for two rotations over both wires. Three rotations on single bio, two rotations over both wires. This is our Van de rotation of weaving. Keep pressing the weaves together and we have to be false 17 complete rotations. At all times. Make sure the base vials do not get deformed. Keep pressing the views together to get nice clues we use and do not get extra weaving virus on both sides. And the weaving by weaving over via 243 rotations of a weaving on the left side values is now done. We will now read over the right side while we will take another piece of four feet long leaving via insert divider between the two Bs virus. Now, make sure you do three rotations on the outer via mail or via number to secure the weaving miao by tying go via number two for three rotations. Then we will VIV over both wires for to complete rotations. Again, same as before. We reveal for 17 complete rotations. Keep pressing the weaves together and do not get extra weaving virus on both sides at this point, as we may need to add views when we shipped the weaved wires, make sure to end the weaving by weaving over single vial for three rotations. So our 17 rotations on both sides are now complete. Now we have this additional bio at the start. So we will cut the vial on both sides and secured or via ends towards the Innosight. Make sure to calculate the flush type lofty Carta using pliers folder virus bound and towards the inner side. In the next lesson, we will give shape to appending. 11. Tulip Pendant : Part-5: If you had any, then we'll start giving shape to appending. We will add some goals and define the farm. Alter left sailboat via staccato and start to call them down towards the center of the storm. Like so. Make sure the virus remained bad allele and called them out again to bring them to the outer side of the stone. We found this kind of an S shape to farm here. At this point. We will call the right side vials to middle the shape on the left. We'll start by covering Tobias down. At the same time, bring them to the center of the stone and call them out towards the outer side of the stone. Refund these wires to be pleased in just about a stone. Try and make them as similar to each other as possible at just tacos and their positions. We can take help of round nose pliers to achieve this, we can use nylon Joe pliers, whatever is comfortable. So bring to the outer left side. Keep satisfied. Continued to add Justin, you are completely satisfied. And the next lesson where we had a few views on this side. 12. Tulip Pendant : Part-6: Let us start this lesson by views on the site. Very led to 23 views. On the right side, virus continued to view the view till the weaving reaches the outer side flame bios. Once we do that, we will start to coil on the bottom bio on which we have the three views for this as a single bio coil, we are going to be coiling on this side while keep pressing the views together to get nice clothes reuse. We have coiled for almost a length of 1.25 inches on the left side virus. So we are calling on the avow bio on WIC We have the three views and the three by two V continue to coil till a length of 1.5 inches. Keep pressing the coil together to get nice clothes. We've now that are coils that any on both sides. So it is almost 1.25 inches off land on both sides. We are going to put wires down from the outer frame side, like so. And we are going to bring the coiling up from the Gap ITO just about the stone and bring it up from the top. For now we're just going to place it right there and call it to the outer side. Nato, we will repeat the process on the other side of the coin, the viral load down and bring it up from the GAP just about the stone. Do not get the extra leaving via on both sides. As we meet. On both sides. We're just going to correlate and leave it there for now. Even bring the weaving via up so that we can add coin. Now are both three by two weaving virus asic yard at this point. And just again, wherever needed. Now we will take the central two wires from the encode, the left wire to the left side to bring it to the outer side of the pendant, folded down to the right side. And boiled it down to the side of dependent. Go down and come up from the gap between the tree. And we can use pliers to bring the VIA. Brings up from this gap just about the coil is set properly over the stone. Push from the back. Dondo via around the frame bio. There will secure the base Vieux over the frame Vieux at this point using pliers fall down so that the end point, us towards the back or the inner side of the frame. Repeat the process on the left side. The left side vial. This is why a number three from the bring the Via up from the gap between the three by two V and the coil while just about the stone. Gently bring the Via up, push from the back side and pull the Via from the F39. Had just tacos at the bottom on the stone. Don divider down. Got the extra bio At this point. Thank secured the bees Vieux over the frame buyer using gene of pliers. Such that it is towards the inner side of the frame virus. We can adjust any Coase, adress any point, and tighten all our joints using pliers at this bind. This is the part where you can definitely folk into dually. You will get your own codes and you can use your favorite to the US. That is, what will make your pendant unique? Criticize yourself to get the best design possible. How basic pennant structure is nowadays? We will add more details in the next lesson. 13. Tulip Pendant : Part-7: In this lesson, we will add more and more details to the pendant. Let us type. We will start by working on the second vial from the three by two V, which is left on both sides. We will follow the buyer down and we want to bring it up from this center down. At the same time. Start folding the VIA and bring it up from the center between the two wires. Slowly push from behind and once it comes out, start pulling from the top. Use pliers to tighten this foil. Straighten derived from the front side is now two different. Now we will repeat for the other side. So Folder via up and parsing from the gap between the two central bios. Gently push it up. Now pulled from the front and press from the backside. Straighten Both vials again, nylon Joe's pliers can definitely be used for this. So we will add more coins. So far we had 1.25 inches of coin. Continue to add bathing using the same weaving via leaving for additional one and choose. Now almost 2.25 inch long. Continue to call on the other side. So we have similar lens of coil on both sides of the extra weaving Vieux. We will call the left side via o in a clockwise direction. So-called go awry. Then bring it again to the outdoor left side. So I'll loop, which we formed was in clockwise direction on the left side. Now on the right side, we want to do the reverse for slightly to the right and then start to call in counterclockwise direction. To form a small circular loop. Make sure both loops are similar in size and diameter. Now bring the Via towards the inner side on the left side and then go out to the right side. But in both wires together in the center. On the top, down from the bottom of it just goes to the center again. Down at the top. We can use pliers to adjust the loop. Now we will cut the extra bios on the top, but even the leaving via leave only enough to tie with the virus. So using pliers, we will follow the wires down. Do not move, will vote on these two central bios in the next lesson. 14. Tulip Pendant : Part-8: And basic pendant islam, ready, in this lesson, we will finish it up with some last weaving. We will focus on these two wires that are at the center. Straighten Darius, I have taken 1.5 feet along weaving bio security weaving bio on the base file and coil for a length of 1.5 inches. Make sure the wires starting point and end point are docked at the back side. Now we are going to be forming a small loop with this wire. So holdover from live with one hand and God the Via in clockwise direction. So holder via form live with one hand and called the Via in clockwise direction to get the small loop like so. Bring the via bank to the outer side and folded down from the outer edge. Got the extra weaving Vieux, the loop and the position of the Law satisfied. Now at the back side, we are going to be tying the via and to this. We have heal over this using at this binder that is any extra vial, then got the extrapolation. Keep adjusting everything till you are satisfied. Now, we will repeat the similar process for the other side via. So take one more piece of leaving via and start to coil on the other side base via. So again, we need 1.5 inches to doing just Lent of coil on this wire. Now we want to repeat the process and mirrors. So we are going to be covering in counterclockwise direction to get the similar size loop in the same position. Make sure both loops are as similar as possible. I'd just the angle, the position, and the size of the loop, Delaware satisfied. Bring the vial back to the outer side and folded down from the outer edge. Cut the extra weaving Y0 and Y0 if there is any. Now similarly to the other side, we will fall this via the d v. Have you putting the Via up from the Gap, folded over the other side while entitled using pliers. Make sure the Via towards the inner side. And then next lesson we will simply add some beads in the center. We had done with the project. 15. Tulip Pendant : Part-9: In this last lesson, we will simply add some beads to the center of dependent. For this, I have taken two pieces of six-inch long weaving bio. And a few beads of your joys will do. This is a two MM copper BY 2.5 MM copper bead at 2.5 MM, green colored onyx bead, which is similar to the color of the stone I'm using, and the 3M copper B, you can use any bits of your choice for this portion. Now we will insert the beads through the wires. Will both wires parallel to each other. And we will start to insert the beads, pass both wires through the beads. So first step to m and b, 2.5 MM bead. So our aim is to gradually increase the size of the beads. Ionic speed and the 3M and bead. Now that are being added, what we will do is place them in the center of the six inches. So we want to spread the virus like so on both sides. Repeat the process for the top portion. Now all we need to do is tie this beads to the main pendant frame. So pleased the beads and position. We want them exactly in the center. Haldeman position first-level secure desktop site virus to deport them via that we have there. So pastor, via through the gap between the coil bio and the central gap, bring it up. This can be a little tricky at times. First what we will do is we will wrap 400 patients on all sides so that our needs are secured and position. So now that the left side is done, we will do the same process on the right train. Leaving via rhythm coiled bottom bio. Now a Beta secured from the top side. Now at the bottom portion, tick the buyer down from this gap right here. Go back. Similarly, the passage through the small gap here and take it back using pliers. Now beads I'd just deposition makes sure the exactly in the center. Time adjusting the position using pliers. Now, all we need to do is add movies on each side. So at the bank, chaotic by coiling over this fire we have right here. You can use any noticed while do the step. So pass it through the gap below n rapid over w0 is vital for four to five rotations on each side. Got the extra weaving bias. Towards the inner side on the back. One by one, we will add views on all sides. Now, all we need to do is give it and then we can polish it up. I hope you enjoyed creating the slowly and coyly pendant. Thank you for taking this class with me. 16. Final Thoughts: I hope you enjoyed creating dweller in with me. And this was just the first step towards learning to vida y wrapping this all about manipulating the virus. It is important to learn the basics properly, to give proper cause and create proper shapes. This course teaches the basic via weaving and via wrapping techniques from which you can create limitless jewelry designs as per your imagination, practice will make your skills more refined and you will need lots of patients while walking. Use your inner creativity to develop your skills and create beautiful duality. If you want to develop your skills further, then definitely visit my beginner's class. The introduction to via ripple class. Create a pendant using single via technique. Don't miss out my glass on creating the Aurora pendant. Make sure you follow me on screen share to get regular updates about any new class that I post. You can also visit my website to purchase advanced level PDF tutorials. You can even follow me on Instagram and Pinterest to have a look at some of my other work. I'm sure you will allow via wrapping. It is a very rewarding hobby and a perfectly at the outlet for you. I hope to see you soon in some of my other classes. Till then, keep practicing and creating.