SOLIDWORKS Class 5 : SOLIDWORKS Materials and Mass Properties | Tayseer Almattar | Skillshare

SOLIDWORKS Class 5 : SOLIDWORKS Materials and Mass Properties

Tayseer Almattar, Realize Innovations

Play Speed
  • 0.5x
  • 1x (Normal)
  • 1.25x
  • 1.5x
  • 2x
7 Videos (13m)
    • Class Series Intro

      2:28
    • The Download Section

      2:14
    • Intro to materials and Mass Properties

      0:51
    • Selecting Mateirals for your Parts

      3:09
    • Viewing Mass Properties

      3:03
    • Student Project

      0:42
    • Class conclusion

      0:49

About This Class

Welcome to our fifth SOLIDWORKS Class covering Materials and Mass Properties. This class is the first of our SOLIDWORKS Class Series which consists of 12 short classes ranging from 15 mins to 1.5 hrs. The series will take you from knowing nothing about SOLIDWORKS to the Certified Professional Level (CSWP).In this specific class, you will learn the following:

  • How to apply materials to parts in SOLIDWORKS.
  • How to find/view the properties of the materials in different units of measurement.
  • How to find the mass properties for your parts.
  • How to change the unit of measurement when viewing the mass properties.

Welcome to our fifth SOLIDWORKS Class covering Materials and Mass Properties. This class is the first of our SOLIDWORKS Class Series which consists of 12 short classes ranging from 15 mins to 1.5 hrs. The series will take you from knowing nothing about SOLIDWORKS to the Certified Professional Level (CSWP).In this specific class, you will learn the following:

  • How to apply materials to parts in SOLIDWORKS.
  • How to find/view the properties of the materials in different units of measurement.
  • How to find the mass properties for your parts.
  • How to change the unit of measurement when viewing the mass properties.

Access the download section for this class here: https://www.dropbox.com/sh/krpystmsb8bwqkc/AADLAg_fEXF7DEY4Zg6dpTyaa?dl=0

 

16

Students

--

Projects

  • --
  • Beginner
  • Intermediate
  • Advanced
  • All Levels
  • Beg/Int
  • Int/Adv

Level

Community Generated

The level is determined by a majority opinion of students who have reviewed this class. The teacher's recommendation is shown until at least 5 student responses are collected.

Tayseer Almattar

Realize Innovations

Hello, I'm Tayseer.

 

Tayseer is a Mechanical Engineer from NC State University. He is also the founder of TforDesign. In addition, for more than 8 years, Tayseer has worked extensively in instructional design and first-hand training of corporate Mechanical Programs.

Throughout his career, Tayseer leveraged the power of SOLIDWORKS to both design products and mechanical-related training materials. He also holds many SOLIDWORKS professional certificates.

In...

See full profile

Report class