H.M Crafting: Complete training about Making Leather Shoulder Bag | H Rafiei & Mariya Karim | Skillshare

H.M Crafting: Complete training about Making Leather Shoulder Bag

H Rafiei & Mariya Karim

H.M Crafting: Complete training about Making Leather Shoulder Bag

H Rafiei & Mariya Karim

Play Speed
  • 0.5x
  • 1x (Normal)
  • 1.25x
  • 1.5x
  • 2x
20 Lessons (1h 59m)
    • 1. 0 mn demo

    • 2. 1

    • 3. 2

    • 4. 3

    • 5. 4

    • 6. 5

    • 7. 6

    • 8. 7

    • 9. 8

    • 10. 9

    • 11. 10

    • 12. 11

    • 13. 12

    • 14. 13

    • 15. 14

    • 16. 15

    • 17. 16

    • 18. 17

    • 19. 18

    • 20. 19

  • --
  • Beginner level
  • Intermediate level
  • Advanced level
  • All levels
  • Beg/Int level
  • Int/Adv level

Community Generated

The level is determined by a majority opinion of students who have reviewed this class. The teacher's recommendation is shown until at least 5 student responses are collected.





About This Class

In the turbulent and industrial life of today, we can clearly feel the absence of art. Art expresses the soul and spirit, and brings life back to us and makes life in this industrial world easier for us. One of these fine arts is the art of leather work. As we associate art with natural, not artificial leather, it gives us more motivation.
With this art you can create and use exquisite works of art like wallet, shoulder bag, purse, bracelet, shoes and all kinds of accessories with your handy crafts. You can also gift them to your loved ones and surprise them.

As you know, buying natural leather accessories such as handbags and shoes is especially expensive. But you can learn the art at your own expense with the art of crafting your own handmade items and design them to your style and enjoy.
You can also make progress and sell your products at a good price. Alternatively, you can make money by educating others.

This art needs creativity. You can make beautiful designs with your creative art and implement them to leather. In this case, create new and new bags and shoes. You can also draw the pattern and pattern if you like the quality and produce the color you need and you're favorite color.

In this course we tried to start with the simple and basic language of the art and learn the advanced and professional steps. Training is well-segmented, as we first introduce the quality we are going to look at when sewing training together and show its internal components.
Then we teach all the sewing needs in this bag individually. Then we introduce all the tools for leather. Next we apply the pattern to the cardboard according to our needs and preferences, then apply it to the leather and teach the other steps sequentially.
This art is not difficult at all in appearance. Rather, if you are interested in this course you can easily learn everything about the art and continue to do so more than ever before.

Watching this course will teach you almost all the tips on leather work. As a result, you can easily draw a pattern and start sewing it with this tutorial. . So with this course you will not only get acquainted with making this bag but you will also be able to sew and implement any bag model

Who this course is for:

  • the ones who are interested in leatherwork
  • Beginners to professionals in leatherwork
  • learning this course can be a very money makingwork for the ones who are looking for a job

Meet Your Teacher

Class Ratings

Expectations Met?
  • Exceeded!
  • Yes
  • Somewhat
  • Not really
Reviews Archive

In October 2018, we updated our review system to improve the way we collect feedback. Below are the reviews written before that update.

Your creative journey starts here.

  • Unlimited access to every class
  • Supportive online creative community
  • Learn offline with Skillshare’s app

Why Join Skillshare?

Take award-winning Skillshare Original Classes

Each class has short lessons, hands-on projects

Your membership supports Skillshare teachers

Learn From Anywhere

Take classes on the go with the Skillshare app. Stream or download to watch on the plane, the subway, or wherever you learn best.



1. 0 mn demo: Hello. And of course, we will teach you everything about leader work without using a soothing machine. We will teach you all the teachers you need to know to stitch this back at the beginning separately so you can learn the different kinds of speeches before starting divorce. One of thes designing stages is to needle stitch, as you can see, and the next section we will introduce you all the tools you need for leader work. And also we will tell you how to use them, then teach you how to draw the patterns and how to cut them. And at the end of start teaching by this course is useful for beginners and professional. Both that want to learn more details in a day. Ther skills. There's two kinds of pockets in this box, one with a zipper and another with a magnet buttons. We will teach you both of them in this course. If it consciously watch this course and use the tapes we teach you, you can easily get professional a leader work and make every kind of backs with no need to use suing machines. And we also teach you how to connect the magnet buttons. Maybe stitching the packets be the hardest and the most important part in making backs. And as you can see, we will teach you three kinds of pockets with two different ways to stage them. We will teach you how to stick difference traps that you can choose one of them with your free will and use them, teach you how to steak and stitched the liner of the bike. Teach you how to mark piers and s teach all around the back in a simple language and the scores and hope you enjoy at the end teach you how to assemble the different pieces of the bag and how to use to needle siege that it's so beautiful for all around the back and at the end tell you how to die around the best. I hope you enjoy and join us in this 2. 1: hello to the students and the ones who are interested in suing leader E stuff. In this course, we are going to teach you how to sue this beautiful and spacious sugar bag. I used natural Count Leader for this. You're in your bag that you can also use good linger. If you are a beginner, it's better to use artifical leader. First, we are going to introduce and teach you the different types of leaders teaching that are more useful in common. The next step is to prepare the tools you need pursuing this bike, and then we will start the course stated. 3. 2: spitting training. 1st 1 is suitor staging. Look at these holes on the top row, pushing needle through the second hole and push it back to the previous one. Push it through the 3rd 1 and push it back through the second blind. Push it true the fourth hole and get back to the 3rd 1 I used the opposite caller so you can see the threat clearly. Yeah, like this Behind the leader Looks like this. We usually use suitor stitching around the back. Seper the Knicks won is diagnose state some speeches. Need just one row on some needs to Diagne a one. It's two rows. Push your needle through the first hole on the top row and then push it through the second hole in the front room, push the needle through the second hole from the top row and then do the same thing. You just stick right now. Yeah, this is the diagnosed it. No, If I want to have an X shape stitch, I'll do the same thing I just did in an opposite way. I mean, ah, you just need to push your needles through the first hole and push it back through the second hole on the front row like this. Use cross stitching for connecting to pieces off leader. Thank it Stitch. Mostly used around the back. And me. Just one row of holes. Imagine that. This is the round of the back. And I want to use blankets which push the needle through the first hole and push it back from the same hope and bring the threat from the inside of this stage. I used this because I want to lead the threat to the top of my bag or top on the edge of my Leave that piece. Now. Push the knee though through the second hole and passed them in the inside the loop. Push it through the third hole and pass it inside the loop. Repeat, this is the blanket stitch to legal stitch eyes like this that we put a needle on each end of our threat. Now we start by going through one hole from front to back. Andi Evan up your threat and then go back from front to back into the same hole. Come from back to front. Look at this blue. We should pass our needle from the middle of this loop and then tie in it up. Repeat, I can delude tight, and I mop to me. Those stitch. Ah, Looks like the stitches of a soothing machine. And it's so organized and clean. Okay, Yeah, just like this. And the front and the back off. The leader looks the same at the end. 4. 3: These are the tools we need for stitching this back or leader work. It'll ah, 50 cent emitters. Metal IQ ruler. Make sure that it's Metta Lake Special Kind of Caesar's for leader. Special glue for Eire, Qatar I used for cutting straight lines. You just need to pull the ruler on a straight line and cut it like this. Pull the ruler tight. Use the Caesars for cutting the curve. Parts die for dying around the bike. As you see when you cut the leader. The cut parts has a different color in comparison with domain leader color. After you glued the parts before you stitch the parts, she should die. The round off the leader four bases under the bike. A few paperclips for keep magnets. Button snap button to strap holder leaver strap buckle for designing leader marking podra dots on the leader homemaker size one or 1.5. With this tool, we can easily pierce the leader and then stages. It's kind of handy punch, you know, that leader is thinking comparison with fabric, and we should pierce it before suing it. And you can knock this whole maker this handle maker with the mullet create the holes, Ah fiberglass board for cutting the leader or knock on the leader with the mullets, and it's OK if Mullah breaks the board while he think this tool is for using snapping. As you can see, one side is dipped and the other side is Give us this green to has the same curves and used for snap button tools for riveting. This is the rivets that used for riveting to pieces like back strap ons. Also used for designing to this is for cleaning the glue from the leader. When the glue Dirt's your leader, you can use this tool to clean it. This is leader punch that we use it instead. Off Homemaker, the Handy one. You can change the size off the heads with turning it around, and it's so much easier year to use because it will make her costs so much energy and makes a lot of noise. But Leader punch has no noise, and it's so easier to pierce the leader with when aids deeper and some thread with the same color as leader and leader Nido I kind of special needle that are made for leader work, and they're thick on a pattern ruler that has hold on it for highlighting where you want to stitch the distance between the holes are different. This tool helps us draw organized holes or spots on the leader. We will start teaching you how to stitch the back in next session. Stay tuned. 5. 4: I use this to prime inside the back. Yeah, when side of this liner is for me, that makes your back resistant. On the other side is a kind of suede fabric, and I use it as liner, and when you touch it, it feels like velvet. Yes, this is much easier than gluing a foam on your leader and then glue your liner on your leader. Let's go to the main part of this video. The leader pieces. I cut it these and tell you the size of these pieces. Two years for cutting the leader. The main piece is a 28 by 53 rectangle. Ah, seven centimeters in the middle of this part makes the lowest part of the back. You can use a singular tool to round the corner after back. You can also use your hammer Ah, on the corner of the by and market with your gel pen. If you are a beginner, it's better to use a scissor for cutting the corner and for cutting the straight parts. Used cutter. I cut it to 17 by seven rectangles for both sites. Off the back I cut. The size is two centimeters. Biggers So if you are a beginner, it's easier for you to stay each the pieces together. If the pieces waas bigger than the size you want, he can easily cut it after staging it. Furred the type off the back. We need 13 by seven rectangle there. Pay attention to the numbers I wrote on the leader pieces. Just cut the pieces the size I just told you. Cuts of 15 by 10 Rick Tango for the pocket on your back on a 15 by six with tango for using under top off the pocket. Andi, I cut it A long rick tango that covers all the pocket You should add all these tree side number 10 plus 10 plus 15. It quells 35. Cut a 35 by four rectangle for around off your cork it because I ran out after leader. I just used tree separated pieces. I have to sue them together and make a long, single piece. If you want to do this to, you have to cut the pieces dressed. 1/2 centimeter large is larger, so you can have enough space to stage them together. I cut it. It, uh, 10.5 by four Rick Tango for this card and a 16 centimeters by four centimeters. Brick tango for this for 1/2 centimeter ish side used to 45 by three rectangles for your bag strap. You can manage the size of your back yourself. I need another wrong sleeping piece for designing the pocket. Look at this pocket. We need this part for placing the Bekoe on it. I'll teach you how to cut this layer. Okay, let's learn how to cut the leader with Cutter. This fiberglass born on a piece of leader Qatar on the metal leak ruler. Imagine that you draw a line on this leader with your marker and you want to catch it. As I said, First trade lines we used Cutter and ruler hold a ruler on the leader Very tight. Remember for cutting leader, especially Cal leader. You need a let off energy to cut it, and if you don't pay attention to two off your hands, the ruler will be diverted and gives you a crude piece. So hold it so tight. And don't drop the ruler until you make sure you finally cut at the leader completely 6. 5: Okay, let's start with the little pocket on the back. First he had just off the pocket. As I said, Your leader is a single 35 by four part. You can easily speech it, but if you are using three pieces like May, you have to connect the pieces. I glued the parts, as you say. I used irons. Oh, and fix them with a paper clip and let dry do the same thing with us a pot and let it dry. Glue 1/2 off the scent emitters and fake some together. And he is a paperclip and let it dry. When it's done, you have to mark deal either 1/2 of a scent emitters, and it will covered by excuse me covered by staging. So market 1/2 of a centimeter end war. The leader. The spots should be 1/2 of a centimeter apart and then punch them with a leader point. Yes, just like this, I'm going to use sutra staging to stitch them. As I said, push the knee though through the second spot and push it back through the 1st 1 pushed through the heart one and push it back from the second tie the threat up after cutting it For tying this up, you have to use your needle into the creative blue and use it to make it tight just like this. Then burned a threat. Went 1/2 of the threat burned. Stick it on the leader fast. And don't worry about this glues. You can use the tool, I said. You can easily clean it. They're the same thing I said. Toe all the parts you glued just like this, stitched the other side and do the same thing you did with the other side. 7. 6: I searches stitched days parts. Now I want to stay each them to the main part off the pocket. After you became professional, you didn't need to Glue departs anymore, and using cuts is enough. After you fits the leader parts keeping with a clip, fix them carefully like this and use a clip on it. Here's a clip for every two or three centimeters again Mark the leader. First, teaching holes should be 1/2 of a centimeters apart from each other and 1/2 of a centimeter in work. The leader When you reach the clip, punch the mark despite its removed a clip. Excuse May and again mark them until you reach the next day. One. Punch him again. You can punch the holes even less than 1/2 of a centimeter. Be careful that the edges of the neither parts be exactly on each other. For the ending part, I moved clip from the UN, punched parts to the punch parts and then continue marking stitch. And like this, I'm done stitching this part now unless a stage thes and other two parts again fix them on each other and keep him with the clip just like this. Mark them right. This punched them. And states just like this just do the same thing like the other parts. 8. 7: I completely done the staging to see Soochow staging for the edge of the bucket. If the leaders surplus at the end, he can easily cut it like this and cut this try. I lead the tied to the body for a reason because it helps us these not to get weak. As I said, make sure you burn and stick all the threads. You're done with time the pocket like this. Now stage the edge of the package to your back. If you're a beginner, I suggest you to do so. Chest it behind the leader. On the other hand, hike the station site the bangle pocket. I recommend you an easy away look. We put the leader parts like this glowed down, fixed them with a clear, then did the state chain crop and turned it. This is kind of hard to do when you want to stitch it to the main part, like the body off the bag. Easier way is like this Speech the edges from behind the leader. Imagine that this is the main part of the UK and this is one off the just fixed spots like this and stitch it and clip another part like this. As you see, the pocket will look like this and forced reaching this to the main part. I have to turn it again. But if yes, stitch like this, you don't need to turn it and he can stitch it easily stitched the part on the back like this. And it's beautiful, too, because of teachers are visual in. That's the kind of method force teaching the leader you can do both, but the second method is much easier and better for beginners. 9. 8: for cleaning the ink off the bag. You can use dishwasher and easily clean it. Yeah, just this dry and and use it simple. Okay. I want to fix the pocket under main part. First, you have to make sure you fix to size off the main part on each other. Length of the bag is 23 cent emitters. These pods will be the lowest part off my back. As I told you, the edge of the bag of seven centimeters. The back end of fourth of the bag is 20 tree sent emitters. The total of these numbers will be 53. You can see a place for the zipper on the upper side. I fixed the Seper Force intimidators lowered on the edge of the back. Okay, is a place for my Zika. The pocket will be a little lower than the zipper. Now I want to decide where to stitch the pocket. The puck. It should be three centimeters apart from the lowest part of the back. So I mark some spots three centimeters apart from the edge of the base part of the back three spots are enough for making sure the line that we want to draw is a straight draw. A line that cross the spots. The backs wife is 28. The center of 28 is 14 that we mark it. Underline. We just drew the main part of the pocket that we cut. It was 15 sentiment, er 1/2 of a sentiment er of each side is on their destiny. So we have 14 centimeters left. Okay, so we find seven sentiment or that is the center of 14 centimeter. When he did mark number zero and 14 on Ruler. These two spots are the endings buds, and this is the center of it. Okay, The length of the pocket is 10. Check it. Would ruler to make sure it's Tencent demeanor I have of a centimeters of it is under the stage again. So we have 9.5, so draw to vertical lines on the baseline. You drew. Make sure the line you draw is vertical. It has to be vertical because if you draw them wrong, So so you see each the pocket wrong, and it's not kind of beautiful for making sure you drawing it straight. Look at this ruler. Both sites off the room there is grated. So look at this. We have a lot lying both sides off the 10. So you fix the lines with this horizontal line draw and then draw a line and be sure it's OK for the ones who are beginners and want to stitch the pocket on the leader. Sir. Face grew the pocket to the back like this and then mark the leader and punch it and easily stated. But I want to sue it the way that hides this teachers, and this is a little difficult for this method. I glue my pocket half off a sentiment er inside the line I draw. On the other hand, this half of a scent emitter is an extra place for high best teaching. I glue the edge of the bucket in, stick it half off a scent emitter inside the place I mark and keep it until dry. You can mark the leader as it's drying. The shorter the gap between the spots is the stronger the stitching is. Spats should be four or five millimeter away from each other. Leader punch is for punching the yet, and you cannot punch in the middle of the leader with So the central parts you have to use fiberglass board and use handy Homemaker number 0.5 for number one puts whole maker exactly and thus but and then hit it with the hammer. My table is glassy, so I cannot hit it. I'm just showing you how to pierce the leader. First, I'll pierce this side and stitch it. Then pierce the second side and stitching and then do the same thing with the third sign. So I piers the pocket and I want to sue chest. Stage it to the back just the same as the previous seasons. I use handy old maker number 0.5. When you pierce the Lee there with handy homemaker number 0.5, you have to inter more pressure on the needle. Two stated in comparison with number one, but number over in five is delicate, so I stand the pressure, but I have a clean state at the end 10. 9: stitching of this side is completed. Now I want to start this side for this side again. Like the previous one, You should blew it. Ah, half of ascent emitters inside the line. You draw like this. You should pay so much attention for using height Staging method. This is the hard part I was talking about. When you make sure that it's on Lee. 1/2 of a centimeter, not more or less and it's a stray. Push it and keep it until dry the corner of the vaccines thicker because off your speeches . So it's harder to work with. But it's not impossible. Let it completely dry. Now again, Mark with your gel pen and then, after you fixed the fiberglass board, piers the leader with your hand, the whole maker and stage it. 11. 10: I stitched the second side. Every single stitch has a back and forth that demand stages. The fourth stitch. I suit the fourth stitch off sutras, teaching in the way that it's inside the pocket and back of the stage that will cover under the liar. The third side is a little harder, and it's a little different. We can pierce it with whole maker because there is no way to do this. First we mark here with the pattern ruler so spots will be organized and then do the same thing with the edge of dip a cared and then turn it and stage A I pierced the pocket and that back. Make sure that the number off the spots on both sides are the same and continue the staging after every single stitch pull the track and continued till dawn. Okay, I'm done staging the pocket before stitching the top of the pocket. Clean the extra clues from the leader like this. And I told you that how to clean the gel pan off the leader. Now I have to die the edges up the pocket with a cotton swab. The die should be exactly the same color as the leader, you can use some kinds of speech for designing like sutras. Teaching diagnosis, teach blanket stage whatever you want, these actors. Or let it be like this without any stage, both of them. It's so beautiful. Now stop stitching the head of the pocket. As I said, we caught up 15 by six Peace for top of the bag, and I rounded the curves with a rounded to like this. You can use any round the tool. Glue the outer side. Be careful to stick it right to the place, stick it and left dry after dried, and we made sure that it's exactly in the middle of the bag. Another way to make sure that the pocket is and, uh, middle off the bag is to use the ruler and side around the pocket. Make sure that it's the same size from each side. Machlas this line with the same methods I told you. Half of a centimeters apart from each other and from the edge Pierce a on again Sue Chastity *** like this. Okay, I'm done now. Died the edges I let dry. You can use any state you want for that too. Now Let's installed a magnet button and the buckle that I made it like this let dry look, I made a thing like this. Looks like an arrow, the length ISS optional. I cut a 15 centimeters stitched the top of the narrow. You can stitch the arrow two lines I pierced here with a whole maker. Number two. This is just design, and I'll use magnet button for locking the pocket. You can use a button in the middle of the pocket, or you can also use two buttons like me four sideways. But if you cut it the pocket 15 by 10 it's better to use two buttons, but if it's a smaller, just the button is enough. Like this. I have to take the buckle off and die around the arrow and Dan. Stitch it, glue it to the middle, find the center of the peace and stick the arrow on it. Let dry like this. Make it three lines for top of the pocket. Used that liner with foamy back. This is the liner with foam. A bike. Use a copy of the piece like this. Mark those two parts to know where to sue the buttons two centimeters each side each month . The button contains four parts that we fix them together and lock them. I'm just showing you with fixer lo que like this so the one with the bulge on the top and sue the other on the main part of the bucket. So I couple the buns where I marked carefully. The's bases are one centimeters apart from each other, so I paunch around those but ah, half Senti Mary's it's I with punter number two past the bubble true, the whole and fixed the button. I put this behind it and bent the bases to make it a strong fix it like this. This part is like a luck for the button. Do the same thing with other part. Now glue all the liner, even the buttons, even on the buttons, and stick it to the top. Peace as you can see, the liner covered every stage, dirt or something just like this on the pocket. Push any spot tight. L let dry okay, dried now for highlighting the spots for another piece of the button. I need to turn the top are on after I Merck sure that it's a stray enough pushed the buttons heart. This makes the top button to mark the leader. As he can see, it marks the downer part like this, and now he can market with your pan, do it with another part, do the same thing. This method is the safest way to know you're suing the buttons right after that punch both sides with patch number two exactly same as other part six thes parts and then the basis just like the other part. - Been that completely? Okay, I'm done with the pocket. I want to use the stage on this. It helps the liner to stick to the leader completely, because glue is not a good keeper and is not strong enough, and the main is teaching the main keepers teaching. The hardest part of this bag was this pocket. It's really hard specially for beginners, so if it can stitch the pocket like this, it's so good. Do it. But if he know you cannot, I recommend you that start with the course that contains a wallet and a shoulder bag. I'm just bringing it for you. It's a wallet and a shoulder back and see. Watch this course because this is much easier down this bag. I'm suing and this teachers are outside the bag. And I suggest that start with this back with a different stage that I already take you. And then you can set this back. And I told you this part was the hardest part of suing this bike. So when you don't with the pocket, you're done with the main part of this back. I'll teach you the zipper and the next course. 12. 11: so does deeper mark three centimeters of each side of the back. Then draw a rectangle with one sentimental whites. If you remember I told you the distance between the the middle of the pocket on the edge of the back is first and Tim Berners So I get force intimidator down and then three centimeters from the corner and draw erect in girl with once Intimidator Rights Used cutter to cop directs and go I just did blue around the Rickston Go choose the orientation of the zipper. Left to ride or right to left depends on side you were the bag Be careful not to glue Dizzy Per And I fixed this super Exactly between directing Go that for you Glue the zipper to the by died the edge of the cutter leader here Di them before Steve Jane mark around Dizzy Per with pattern ruler and jail pen for stitching this part. The distance between the spots is not that important. Just be careful about the distance between the spots and the edge of the back like this. I will do the same thing all around the zipper and pierce it with home and Karen number one and sutra stage to fix the zipper to the back. Hope Ponch Inc. It's better to unzip busy, pert and punch it from the inside them the middle just like this. Be careful to part exactly under marks it helps you to have ah, organized stage. I'm gon sti ching around dizzy per back and forth years Ah, liner pea sized 22 by 27 The bag was 20. Tree by 28 Cut the liner a sentiment smaller. If Billy there is fake you want or you want Excuse me where you want your back to stand loose you can use an usual liner. I mean, a slain clothes. So this is going to be the liner part of the back, so glue all over it use a lot of glue because some parts are not going to get stitched. So you grew a lot to fix the liner to stick good and they fixed again 1/2 of a centimeter each side and steak the liner. No need to stretch it. Don't stretch it at all. It only needs pressure. This part is a little surplus so I can cut it before the flu start drawing as I said this part was much easier. Wasn't it? Done? He can also glue a liner inside the pocket if you want. If you're liner is flame, you can do this. My liner is thick and that's why I don't use it. Because if I dio, my back will be so straight and it doesn't look good at all when I say optional. I mean some people like the leader to be naturalism places. On the other hand, they want to show the neutrality of the leader. 13. 12: And how did the back zipper? I cut it. A 14 cent emitters. Peas of a zipper. You can change the size, but if you cut the zipper shorter than this, it will be unuseful. But you can cut it longer. I get down from the edge of the leader for five centimeters. The back wife is 28 the middle of it is 14 centimeters. Andi, I want my Z per to be 14 scent emitters. Because of this, I set seven centimeters to the middle and I just market and seven centimeters. It's like equals 14 cent tuners on the wife is always one use metallic ruler and a cutter to cut it carefully. Okay, I just cut it. I just have to diet. I cut it a 12 5 25 of the firm A liner for inside the pocket. I'll cut 15 centimeters off. The deeper the stitching tip is like I'm telling you, right. Set the zipper on the liner. This is behind the liner, and this is the front part. Put this Z per one centimeter downer on the liner edge, Rub a lot off glue around dizzy per on and fold that one centimeter un disease. Her use clips for keeping it just like this fault. The lower part on the zipper too. Sue is with normal needle and threat. He can sue it with suing machine too. But don't use Lee their needle. If it cannot use a machine, you can use your hands like me, stitch it normally and stitch back to tighten it. Okay, I'm done with staging both sides off the pocket. Now I glue all around the Z per place and stick the pocket to the main part of the back. 14. 13: Okay. Now mark around the zipper with your pen and pungent around and sued. Dressed it it. I'm market now for punching for the lower part. Unzipped the pocket and punch it from the middle. Like this forded of line like this, They're the same thing. Okay, I stitched the zipper. This was the third super. That was so easy, wasn't it? Ok, now it's time to connect the basis of the back. Find the base of the bike. If you remember, the back and forth was 23 centimeters and, uh, the base was seven. Sentiment the total waas 53. Okay, now I want to find four spots for the basis. This is optional. You can connect days or not. First mark a scent emitters and 1/2 centimeter away from the lying. You drop then, mark five centimeters from the edge of the back. Exactly. Downer on the spot. You just mind and that's it. This is the spots you worn. Punch it with punch number two. Push the bases through the hole and bend the basis like this and do the same thing for the other side. Find the place and connect them. I told you, this is optional and you don't have to use this basis 15. 14: the only thing that left to do before suing the liner is this. Teach this drop. If you remember. I told you we need to 45 by three rectangles and these sizes are completely optional. The wife can be 2.5. You can cop this. Drop larger. Use this kind of special tubes. These are made for a back straw. You can make sure of the size you need to stitch and then cross the tubes from the back strap. And those drop would look like this. But this is the method I'm going to use. I die the edges off this drop, I leave behind those. Drop the way it ISS. It's really optional. Some people like it when the behind of the leader is visible. He can also cut the sizes double unfolded and stitch it stitch all around it for design. Imagine that this was double. I would fold it and stick it on each other and stitch. Oliver, this is another tip. This is the back strap. I kind of the edges in another public shape and I look like this for highlighting where two staged a strap six and Tim Attar's inside the backs buddy from the corner of it and four centimeters inside from the edge from and glue behind the strap and stick it mark around this drop for its side mark the edges of the Streib like this punted with puncher number one or old 0.5 and suggest Ege Look at the marking. It should be exactly simp symmetry. Okay, I stitch all around those drop like this and four different struck I want to use to strap keeper And you can even stitch to front Back exactly like the back when Or you can use a straw upholder like me for connecting these pieces to the, uh, straw. I need to leader pieces like this The length of thes pieces is six centimeters and the corners are just like back Strap across this pieces from the strap holder Yeah, like this and blue I staked them and die thes that the edges It's better to die before you cross it from the straw holder. I marked the place I want my strap to be six and emitters inside the back, Buddy from the coronaries and threes and defender from the top of the body glued down and stick them oper than us. But like this? Yes. You see, I'm sticking the mark the stitching line on the strap older like this and again Soochow STG now across this trap from the straw holder and glue them and stick down on the stage them before your stitched the second strong Check the length of thes drop to be the same. If it's longer than normal, just easily cut it. 16. 15: we don't use sutras teaching for this part because behind the work doesn't look good with sutra staging, and it's not suitable. I used to needle stitch. I'm going to use this kind of stitching for all around the back to on and I teach you how to suitt how to stitch it at the beginning of the course. So we used to needles ditching in for the beginning and the ending the stage Push your needle in between the leaders and get out from the hole and at the end, do the same thing to hide the threat. Okay, we're done stitching these traps, cop, that's red and tie it up, lead the threat to the top with Nida and burn it. I told you how to burn the threat and previous courses. It's not difficult to do, and all you need to do is just burn it and stick the threat to the leader with your finger . And be careful not to spread it because it will make your leader dirty or live and be careful to do it somewhere no one can clearly see. And because of that, I will stick it to a brown part. Not the bride, Irwan. Now it's time to prepare the liner and stick it to the body of the back, said your bag on the liner part and draw the shape. It's better to draw it behind the liners so it will not be visible at the end. Okay, the principles fast. We make all the packets prepared. Speech this draft. If you want to connect any basis, do. And after all these things, you did cut and stick the liner for sticking. It grew all over the back, buddy, and stick the liner carefully like this. Sit from one side, slow related, the other side folded to see if the basis OK or not, stretch it and pull it to say if it's OK or not, and that's it. Let dry, and you can even use clips to fix it to 17. 16: No. I want to stitch to side pieces to the top piece of our back. The size of this piece is optional. You can cut it a little bit longer and connected to the site piece. Seper will stitch here. So depends on how much you want your zipper to get lower. You can change the size. The wife of the pieces. Seven centimeters. I found the middle and draw a line. Marketers and Tim Berners in war the pace and drew a rectangle with once and team in our wife. This is where does Zipper is going to be? Cut the draw part with co chair here. Put the ruler behind the line Just a little. My zipper is why So it needs more speed for moving to open it or close it. So I need to cut the rectangle a little bit bigger. Yeah. How'd it carefully like this? Okay, done. I died the inner edges and glued, and it's ready for sticking it to the paper. Look, this bag has tree zippers, so it's better all the zippers being the same direction and better to use the same pool top for all 36 But use a smaller pool tap for smaller Book it and the bigger one for bigger Zip . But it's OK if all the pull tabs were the same size. Okay, I stick them like this and Sutra stage around does it again? Be careful about the distance between the spots I marked all around and I want to punch Teoh. - I stitched them. 18. 17: Okay, I'm done stitching around visit and I stick these parts using a really slim liner note The color and the genius of the fabric isn't important. I glue both sides off the leader pieces and stick them with a liner. Peace. Now these pieces are ready to stage again Market and use cross staging for thy. It's better to mark the spots closely. The closer the spots are the stronger ist ich will be. The spots should be exactly in front of each other. And for this kind of speech ing the same number. Obviously. Okay, I stitched these three pieces with Cross s teaching. You can see that I've done it really small speeches with really small speeches. It's so strong and beautiful now. I covered my liner exactly the same size of my total leader parts and cut the Z place and I want to stick the liner to the leader. You can also stick the middle parts liner before stitching the zipper. And if you do this, you have to stitch it with the mains. It and it will be so stronger. And if you do the same thing as I did, it's okay. Now glue all over the liner and around is it and stick it carefully. - Cut the extra parts. All rights. Now, this is my favorite poor. It's the most interesting part of this course. We want to teach the site parts of the bag to the main park. All right for this mark the middle of the bag and more in the middle of the zip. Be careful about the direction off the pool taps to be the same. Now I stick the middle of these two parts. Yes, take the middle of a bomb. Be careful about it, slowly, impatiently. When I speak them on each other, keep them with a clear. The rest of this part is easy. Stupid. With a clip, cut their serve lost liners around your back. This is the last chance to cut it. It's better to cut the liner 1/2 of a sentiment for smaller than the main bag. While cutting, I cut thes side pieces about two centimetres longer because if it's extra, you can easily cut it. But if it's a smother, you cannot do anything to fix it, and you will mess up. So same as the previous barred just through the parts and let them dry. Look, I draw the line for the lowest part of the bike. I think that from the middle and end up with the side part. As I told you, I cut it the site part a little longer when I reached here Market to know where to cut. Do the same thing with the other part like this. Then cut the extra Lee. There is the scissors to cut the corners a bit again. Clear them and clips just like this steak. The other side the same way. Okay, Don. Now it's time for a speech. Chain ache again. Pattern ruler in jail pound Put the ruler on the sai parts. Um, Mark every old 0.5 cent teamer Do it for all around the bag punch with punter number one and used to needle stage for that 19. 18: Okay, I'm going to tell you what to do When you run out off the threat, push the needle through the night spot like before. Like when you stage. But push it back in between the two leader pieces instead. Off the second piece like this, do the same thing with the other nido. Take the needles off and pulled a threat and tired tide and the tie and again tied again. Cut the trip to 1/2 of a centimeter or one centimeters and push the throughout between the leaders. Needle in trouble again. Prepare another one. Find the last stage spot who's the neither through the leader and pull until I make sure that I find the middle's but of the threat Black. Pull it. Yeah, I do it because I want to finish the tread the same time in both sides. OK, continue this Tichy 20. 19: Okay. Finally, with finished this by I used to needle sticks for all around the back, as I told you, and this is the inside of the bag to those stitches hard, but it's worth it because it's really beautiful and shapely at the and clean the gel pan with dishwasher and clean. The glues use this tool to clean the glues. As I said, Now it's time for the final part. I mean, dying the edges off the back. Use a cotton swab. Died the lighter parts patiently. It's okay if you died a little out of the line because you can clean the die with a moist e fabric. But don't let it right. If you do it, you can hardly clean it. - Make the napkin where and clean the leader. Okay, I'm done dying it and done with stitching the by. You can also use blankets Stich, diagnose stitch or any of this teaches you I learned at the beginning of the course instead , off tune it'll stitch. That's completely optional. Onda at the end. I wish you find this videos useful and you could use it. Wow and make beautiful bags and good bye, guys. Okay, guys, stay with us. I hope to see you again in other courses. Goodbye