Designing with Components - Fusion 360 - Design a Working Led Tealight

Vladimir Mariano, I'd rather be 3D Printing

Play Speed
  • 0.5x
  • 1x (Normal)
  • 1.25x
  • 1.5x
  • 2x
26 Videos (1h 35m)
    • 01 Itroduction

      1:57
    • 02 Parts Needed

      2:29
    • 03 How it Works

      3:35
    • 04 Designing with Components

      2:56
    • 05 Configure Z up

      1:22
    • 06 Sketch Constraint Status

      2:47
    • 07 Designing the Battery Component

      2:21
    • 08 Sketch and Revolve

      5:46
    • 09 Sketch on Top Surface

      3:04
    • 10 Sketch on Side & Pipe Command

      6:54
    • 11 Side Opening

      3:26
    • 12 Bumpout

      3:49
    • 13 Sketch and Revolve

      4:29
    • 14 Bottom Bumpouts

      4:04
    • 15 Top Sketch & Circular Pattern

      7:29
    • 16 Section Analysis

      4:13
    • 17 Sketch & Extrude

      4:13
    • 18 Increase Radius

      2:04
    • 19 Locking key

      2:44
    • 20 On Off Indicators

      5:35
    • 21 Slot

      2:32
    • 22 Arrow Indicator to Bottom Component

      2:56
    • 23 Top Fillet

      3:25
    • 24 Extrusion Width

      8:19
    • 25 Assemble All the Parts

      1:55
    • 26 Congratulations

      0:39

About This Class

This course is an excellent sequel to the Designing For 3D Printing with Fusion 360 course by Vladimir Mariano.  We learn how to tackle a multi-part design by taking advantage of using components and other powerful design tools in Fusion 360.  We will design an LED tea light that functions as a mechanical switch and can be used to light up our other 3d prints.  It's an excellent example of using 3d printing for practical and functional designs.

At the end of this course you will have gained the design skills and confidence to take a multi-part design from concept to 3d printed prototype. 

We will cover many sketching and modeling concepts and also go through some best practices when designing for 3d printing such tolerances needed for a snug fit when assembling two or more parts.

I will guide you through easy to follow step by step instructions as we create a rewarding model.

5

Students

--

Projects

0

Reviews (0)

Vladimir Mariano

I'd rather be 3D Printing

Vladimir Mariano is the instructor of the course 3D Designing for 3D Printing with Fusion 360. He is cofounder and president of the Fairfield County Makers' Guild, an independent makerspace in Norwalk, CT and founder of CT Robotics Academy. He teaches 3D printing and design at the makerspace as well as electronics and programming classes. Vladimir also teaches several maker related classes at local libraries and schools and was the coach for a local robotics team. He has a degree in Geolog...

See full profile