Darktable complete course for photo editing | Nicolas Forgue | Skillshare

Darktable complete course for photo editing

Nicolas Forgue, Welcome awesome students !

Play Speed
  • 0.5x
  • 1x (Normal)
  • 1.25x
  • 1.5x
  • 2x
98 Lessons (8h 54m)
    • 1. Introduction

      2:43
    • 2. Dashboard

      6:17
    • 3. Lighttable mode

      2:40
    • 4. Navigation

      8:12
    • 5. Import images

      8:15
    • 6. Collect images

      9:10
    • 7. Image information

      3:37
    • 8. Recently used collections

      2:20
    • 9. Selections

      4:31
    • 10. Selected images

      7:43
    • 11. History stack

      7:22
    • 12. Styles

      8:10
    • 13. Metadata editor

      7:30
    • 14. Tagging

      10:02
    • 15. Export selected

      5:07
    • 16. Darkroom mode

      5:02
    • 17. Apply modules

      3:26
    • 18. Import folder

      1:20
    • 19. Active modules

      4:16
    • 20. Module sharpen

      3:11
    • 21. Module levels

      5:04
    • 22. Module contrast brightness saturation

      3:02
    • 23. Module color zones

      9:06
    • 24. Module color balance

      5:05
    • 25. Module basic adjustment

      5:15
    • 26. Module base curve

      5:47
    • 27. Module shadows and highlights

      4:33
    • 28. Module white balance

      3:18
    • 29. Module exposure

      3:38
    • 30. Histogram

      5:09
    • 31. Geotagging

      2:11
    • 32. Edit parameters

      8:39
    • 33. Presets

      7:23
    • 34. Snapshots

      7:34
    • 35. History panel

      3:46
    • 36. Active modules

      4:16
    • 37. Color picker

      7:13
    • 38. Duplicate manager

      6:02
    • 39. Reset parameters

      2:57
    • 40. Module color reconstruction

      4:01
    • 41. Module crop and rotate

      4:09
    • 42. Module invert

      2:54
    • 43. Module fill light

      3:51
    • 44. Module RGB curve

      9:04
    • 45. Module RGB levels

      5:22
    • 46. Module local contrast

      4:56
    • 47. Module zone system

      5:29
    • 48. Module velvia

      2:55
    • 49. Module channel mixer

      3:25
    • 50. Module color contrast

      3:06
    • 51. Module color correction

      3:42
    • 52. Module monochrome

      2:52
    • 53. Module color look up table

      5:17
    • 54. Module contrast equalizer

      4:16
    • 55. Module perspective correction

      3:56
    • 56. Module haze removal

      3:29
    • 57. Module liquify

      4:52
    • 58. Module retouch

      12:23
    • 59. Module spot removal

      6:57
    • 60. Module watermark

      4:13
    • 61. Module framing

      4:09
    • 62. Module split toning

      5:01
    • 63. Module vignetting

      5:20
    • 64. Module soften

      3:00
    • 65. Module grain

      3:57
    • 66. Module highpass

      4:02
    • 67. Module lowpass

      2:42
    • 68. Module lowlight vision

      4:07
    • 69. Module bloom

      3:27
    • 70. Module graduated density

      5:44
    • 71. Module colorize

      2:31
    • 72. Blend mode

      6:01
    • 73. Start with masks

      8:13
    • 74. Draw mask brush

      9:31
    • 75. Draw mask circle

      4:21
    • 76. Draw mask ellipse

      4:18
    • 77. Draw mask path

      4:54
    • 78. Draw mask gradient

      5:16
    • 79. Draw mask work with different shapes

      10:07
    • 80. Parametric mask

      11:22
    • 81. Draw and parametric mask

      6:02
    • 82. Instances

      8:32
    • 83. Work with picture in black and white

      4:48
    • 84. Portrait black and white

      6:24
    • 85. Selective black and white example 1

      3:57
    • 86. Selective black and white example 2

      4:01
    • 87. Selective black and white example 3

      3:31
    • 88. Landscape photo 1

      7:33
    • 89. Landscape photo 2

      6:51
    • 90. Landscape photo 3

      5:25
    • 91. Landscape photo 4

      7:43
    • 92. Change eyes color

      5:38
    • 93. Smooth skin

      8:00
    • 94. Light effect on portrait

      5:02
    • 95. Edit face part 1

      10:33
    • 96. Edit face part 2

      10:01
    • 97. Map mode

      6:19
    • 98. Slideshow mode

      3:48

About This Class

Darktable software

Welcome to Darktable. Darktable is open source photo editing software. It is an image processing software which is a more than interesting alternative to the better known Adobe Lightroom. After working on both Darktable presents even more features than Lightroom in image processing. Darktable is even more complex in my opinion because many points are far from intuitive. Today if you want to work on photo editing with free software, and you don't want to go through a Photoshop and Lightroom subscription, use Darktable. It is truly a benchmark and this tool is extremely powerful. Come and embellish all your photos with the advanced features offered by the software. Import, organize and add information about your photos so you can easily find them. Darktable, a very complete software that would be really stupid to ignore for photo editing. On the contrary, you have everything to have in retouching photos with this software.

Training

In this course you will see how to use Darktable software from scratch. You will see step by step how to use the software with all these features. At first you will see how to import photos, how to add information, organize them and also search them by metadata. You will then see how to edit all types of photos with the different modules. So you will learn how to use the different editing tools. Finally you will see concrete examples of retouching to embellish and improve all types of photos.

Transcripts

1. Introduction: Hello everybody, it's Nicholas and welcome to cease cares about deductible software for photo editing. Deductible is photo editing software. It is an image processing softwares at his most interesting alternative to the most famous Adobe Lightroom. After working on Bostock table, even more features that Lightroom about sings in image processing. That table is even more complex, in my opinion, because many prints are far from intuitive. Deductible, specialize in photo processing with a non-destructive data format in debt. So changes save, compare to the original file, which is kept at anytime enters a loss to have advanced treatment. So software has two main modes. So likable modes and so darkroom months. So light table modes is to import and classify photos. And that crumbled is for photo editing. If you want to work on photo editing software with an open source software, and you do not want to go through a subscription in something like Photoshop or Lightroom, you can use that table. It's really a reference and this tool is extremely powerful. Can beautify all your photos with advanced features offered by the software. Import, organize, and add information about your photos so you can easily find them. Deductible is very complete software that will be really not useful to ignore for photo editing. On the contrary, you have every scene to shoot the photos with the software. In this course, you will see how to use of 12 deductible from scratch. You will see step by step how to use the software with all these features. At first, you will see how to import photo, how to add information, how you can manage them, and also search by metadata. You will then see how to edit all type of photo with different models. You will see in details the light table modes. And you will see in details the darkroom modes. You will learn how to use also editing tools. And finally, you will see concrete example of heritage and embellish and improve our type of photos. Landscapes, and portrait. 2. Dashboard: We are going to start with the dashboard of duct timber. When you start with the software, you can have Zs interface. The things that you have is you have three different modes. So first mode, it's Tibor, said you have darkroom and also you have other modes here with map, slideshow and teetering. So two main modes are light table and died dot-com, but after you have sudden modes and you can also use this. In a later module, we'll be able to manage all your pictures. Pictures, add different informations, and classify your pictures with collection. In duckbill mode, you will be able to edit directly all your photo with the different adjustment. And you will have every time you center your pictures and at the same time to have your pictures, depending of your mode, you can see your creed of pictures and things. When you are here, you have the possibility each time to click on these panels. So it means you can go here. And if you click at this part, as you can see, you can have full screen in the center sometime it's useful because when you walk into a dark room, it can be interesting to do this job. And you can do the same process here each time. And at the same time you can do this here or so. Just like this. And yes, as you can see, you can also just click here. And at the same time you can do the same process just like this. So this is how you can manage your interface. It's time if you don't want to tab on the left side, you can change that. If you don't want to. Right size, you can change that and same on the top and on the bottom. You don't have many parameter to change them. If you need to change something, you can ask the preferences, show global preferences show global preferences. When you click here, you have different elements, like first of January, she wants you need to change the language. You can directly go on interface language. You have the ten that table ten. If you want, you can change your differ on type of tabs. You can use. Here we are just going to use a deductible ten. But if you want to have some seeing cure more in gray, you have also the possibility to change that. As you can see. So numero responsibility, just like that, we're going to walk here with a basic deductible ten. That's it. After you ever saw information about him, partitions here, a fin, you can keep your different parameters. You have also, just as a light table mode, let not too much many sings really to change here. You ever saw darkroom and also ozone views or is obvious will be interesting. You will be able to change the maximum number of images drew on map, insert geolocation and map mode. We will see that. And the first lecture you can general Susan number of Sagan's in between also photos. We will see that also. After you can have seen security, you can have interesting things because he asked to use something each time that you want to move different folder that you want to delete image. And yes, it's useful. It can be useful as before, deleting or tag as before deleting style ISP for deleting presets. For example, I can click here or so it's going to be beta. You can find information about memory on your computer. And here if you want, you can increase, like US memory limits can be interesting if you want to have better performance on your computer, but it depends of your computer. And some principle, you can see your database, not too much things to do. And something interesting again, finds a different shortcut here. If you need to have information, you can have also schottky out here. One of the things that you can do, it's you don't have struck it with adjustment. But with global adjustment, you can global go buy shortcut global elements. You can see different shortcut here as that you can use can be interesting. And you have also the presets. Presets, it's what it just on different different adjustment. You can have a number of percentage basis. But normally we don't change that also. So I'm not going to be suppressant for agreeing to advice you to change also preferences, because the preferences are right, our right, you can make just few adjustment. If really, really, really neat. For the rest, you move here. And that's it for this dashboard. It's not a very difficult job. Dodge ball, you just need to walk and to choose a different mode. So you click here, light table, darkroom on ozone. And each time the dashboard will be little different and you will have something different on the left side and something different on the right size, depending of the mode. 3. Lighttable mode: Let's introduce the light table mode. In satellite thermal mode, what you can do, you can import your pictures. You can apply different filter to select the pictures. Something interesting is you have many parameter on the right and each time you can phrase on civic PO, pictures with these parameters, you can also find Selected image, selected image. It's also extremely interesting because you can remove image on deductible, but also directly on your computer. You can move images directly on your computer. Chains of five. You don't walk on me, on deductible. You can also walk directly on file on your computer with selected image, again of history stacks. So it means you can pass different adjustment of image on audios images. You can create style. You have metadata editor to apply different informations on each images. You have also tagging. You can have keywords, keywords, and you have a Suzhou tidy, tidying are again experts elected. Although things are extremely useful. Extremely useful because a sings 2-SAT, you can walk with this mug, you can walk with this mode. And thanks to xhat, you can move between so darkroom and selectable mode. Each time that you click on the pictures like this, you go into decrement, decrement mud. As you can see, it's not exactly the same parameters. Here you have some models and here you have ouzo type of parameters. And when you want, for example, to change a folder, you can come back to the light table mode. You can go on here, collect images, and you can change the images such a world with your different folder. So the only things that you need to understand is that it's a light table mode. It's made to import pictures. It's made to add different information of your pictures to classify your pictures with different filters so that we can apply with metadata editor, with tagging. And at the same time you can change your selection, you can move your pictures also in Z's interface in that table, but also directly on your computer. 4. Navigation: Let's see. Navigation. Saws a navigation. What is this? It is that you can have these grid with all your picture. So here amongst the Fillmore and I have my 50 sweep pictures. If I just use my scroll wheel, my wheel mouse, if I just use my wind most, I can just click cultural and control. And with a wind mouse, I can just change the view lysis, so control and will most, and you can just zoom in and zoom out to change the size of your grid. And two are, for example, something like this. And you can do exactly the same process. And for this you can just go at this levels. You have here the number of pictures that you want to have on the same line. You have six. And you can change from zapped. So you can have when pictures, you can change from two, you can change for us, for a suite. Can change 4-5-6, nine things that you want. So here, ten pictures per line, as you can say, you have ten pictures, 10101010. And Chairman, last sweep pictures. This is a type of things that you can do first fossa navigation. Me generally I use between 46 pictures on this part just to see some information. If you reduce like this, you will be able to find information like the number of stars. If it's too small, you won't be able to see x_hat. And let's take an example. I go and six, you can see the number of stars each time on each pictures, you can directly enter the number of stars. So for example, I have this I can praise and five stars if I want to, I can use for styles. Here. I can make 5-stars here, I can make four. So each time you can GEV rate on your different pictures. At the same time. It's not only about rate, it's nice that you can apply different labels. You can apply collaborates. It means that see the same principle. I can see the portrait, my portrait folders and I would like to apply on this doctorate just a koala bears can just click here. And directly as you can see now, I have a small blue circle. What I have labeled here, and I can do for example, is the same here applies a blue label because it's a portrait. Also. And I can see XIST pictures and some principle I can also applies a blue label. I'll show you that after you can also apply different parameter on the same pictures at the same time. If I just come back to my funeral, can just go recede parameters Shi'a, all my pictures. And if I just go on the spot, as you can see, I have my blue label here, my blue library here, and also my blue labels on this part. So this is something interesting that you need to know. First. If you want to just to move and change agreed, you need to change this. And after you can enter sings like rating. And at the same time you can apply also labels. Each time you can see View. Here, it's all your pictures. You will be able to change that. So depending of the notes that you can use, styles that you can use, you will be able, for example, to apply for first stars or something like this. And for this reason I am just going to make notes on all my status. So let just come back. I'm going to select all my pictures just like this. So I go and visit here. I just change for view. And just all laziness. I have all my pictures and let's apply a star. So different pictures. Z slices. Just going to apply this randomly, just sweeter Swiss stars. At least. Maybe I can come back farm suite five. So I'm going to write all these different pictures first. And that's it. So now as you can see, I make, I made the rate on the different pictures. Now I can go on this part and you have HU also pictures. If you seal it and start only and not going to have any scene for the simple reason that I have a rating on all my pictures now. And after you can see, for example, when stars. So I don't have anything in west out two styles, nothing and Swiss towns. And it is also pictures with Swiss stars at this livers. You can change, for example, for first taus and you can change it so far, for example, 5-stars. You can also change. Here. You have superior yolk. You can find inferior, inferior, equal, equal, superior equals superior and difference. It means that I can select, for example, inferior or equal to four stars. So I can click here, inferior equal to foster. So I will have four stars and Swiss stars. I can change that for Super Mario or equal to four stars. And we'll have all my pictures with four stars are 5-stars. And this is how it works. And if you click on difference here, I will have all my pictures different Zan, four-stars for example. So sweet stuff I've stars. Also different scenes. So this is something that you need to know. You can acidic something or if you don't want any things you gens just come back to all lysis. And now you have all the pictures, depending of the folders that you choose. On the left, you have solved by finite m, as you can see, but you can change by rating with first as a 5-stars or change. You can change that. You can also change for a color labels. You can change that with description. So yes, you can also sort by and you can edit sat on it. You can just come back to file name. 5. Import images: Let's start with an importation of x2 pictures. To import pictures, you need to go on import here. When you click on this part and this part, you can improve image all directly folder. I'm going to start to show you with further just lazy so I can click here. You need to go on your computer. You can see all the different scenes on your computer. And after you select the right file here, in my example, I walk in my Desktop and in my desktop I have a folder named photo. So I click here. And I, I created different folder, Iceland, Japan, landscape, Norway, portrait, Sweden, and Taiwan. And we're going to work with these different pictures. And the things that I need to do here, you can also import options. But if you just click on this patterns, you can see on the two blush to CSU in options and to not use the import options like that. And if I just click on a folder, I can import. So for example, you have Iceland, I click here, go on open. And that's it. I have ten pictures in this folder, and I have imported this picture. Now if I go on collect images, I will find my folder, Iceland, just like this inside the film, rather. Let's continue. Who are going to impose a different folder can continue on Felder and citizens time Japan. Click here and open. Just like this. If I take a grandson's a collector of images, I have no my folder on Japan here, Iceland, Japan. Now let's continue. Impart further again. And I'm going to import Norway. Just laces here I selected images. When you go and import images, you can see your different pictures here. And you can also open only pictures. You can, for example, select two pictures, click open, or you can press shift. So you have different possibility. Here in Port image. If I go on, for example, Norway, I can see my different pictures on the right as you can see. And you can just import one pictures. You can also press Shift to see different pictures at the same time, I can import three pictures if I want. I can associate a control on the keyboard to select suite, for example, or more different pictures inside. So further, I'm going to show you this just after. So now let's continue. Import folder Norway. Open. Just like this import folder. Sweden, open in parent folder, Taiwan. Open just like this. So now I have Taiwan's Sweden, Norway, Japan, Iceland. I have also a folder with portraits, sweet pictures of portraits that I am going to use is that I'm going to use. So for this reason, this time we're going to show you is image import image. And I sync my folder. It's inside the portrait, just like this. I go inside and a, a face, model and woman. If I just import one picture like face, can just click here. Open. And this time I open just one pictures, just like this because it's just one pictures I move. It's a darkroom. I can come back to to light table. And as you can see, automatically, I have one pictures, but I have the name on the folder on my computer. So it was a part of my folder portrait and I have one pictures and automatically he is going to have the right folder. Now you can also add information in port, in edge. And if, for example, acidic mothers, I can go on import options. And here you can apply directly metadata on import. So it means that I can type something like tighter trust models and descriptions. Modern photo fashion for example, or whatever you want. Modern photo, woman. Just like this. Crito, I can tip them seeing if I want, I can make John Doe and that's it. You can also enter puberty shall write notes, tags, everything that you want. You can apply metadata on, improved directly on the pictures. If I just click on open, just like this, i in proteins these pictures because it just one pictures I move in so dark humor and I can come back to night table. And in my portrait here, I have pictures. And it means that if I click on these pictures, I go on my metadata, I determined directly I have tighter models. Model photo woman, Crito, John Doe. Because at the importation directly, I added different metadata. And if I click on an older pictures like this, as you can see, there is going to come back on light table mode. As you can see on the right, I don't have any metadata because I imported, or if I click here on this picture because I imported the wizard to fill with any metadata. And we will see Mehta day teh, just Laughter. And that's it. We are going to improve the last picture. So import image. And this time, this time here, you can remove meta-data. Hey, if you want, just like this, and I can implant just woman, click open. That's it. Now I come back on night table and that's okay. So I imported also pictures that I wanted to improve. So I have Swedish six different folder, portrait, Taiwan, Sweden, Norway, Japan, and Iceland. Something interesting. So you import with image, so only image inside the folder that you want on your computer. And if you click on import folder, you can directly go into folders that you want on your computer and brought a folder shared just import option. Not obliged to use this. He want you can import wizard, import options. And after I'm going to show you that you can use a collect images to find your different pictures. So here we have the Filmer, film, a whole Filmer commencing. So it means if you just revisit the parameter here, you can see all your pictures in protein. So she hits all the pictures that I have in deductible. So as you can see, I have 53 images. And if I just click on one of my folder like Taiwan, I'm going to offend moron. And here xo location on my computer wizard. And I have the picture. 6. Collect images: We are going to see collect images. So m of collect images is to apply different filters to have pictures that you want here. So basic things is Fillmore. In female realm, you will find all your pictures that you have imported, all pictures just lazy IS after for sure. You can change with the number of staff here. You can also change some by, but by default you will have also pictures here. No, if I just click, for example, on a folder like Taiwan, on the right, you can see the folder just laziness. Since the first dose that you can have. At the same time, you can apply different condition each time that you want to resist, you just click Result parameter and I come back to Fillmore. You can also apply different condition inside the Fedora. I can apply some sink like, for example, collaborators and I have sweeping tools with the blue koala bears. So it means I can click here, this is our sweet pictures with collaborators. So you can enter different conditions. Now I can come back, not coloribus can apply some sync line, not everything Evernote. So I have my 50 sweet pictures. I can apply something like focal late. I have different focal plane depending of the pictures. I can apply some sink like camera or so. And each time I have this number of pictures, if I just click here, sati eight pictures taking with this camera, nine pictures is this picture sticking with this camera and three pictures taking with this camera. And you can apply also also seen, if I come back to focal lens, I'm going to have sweep pictures with these focal lens. When pictures swipe pictures also whizzes. And yes, here it's not really good about this. I'm just going to show you something different. You can also enter tie. We will see after that we can enter tagging on the right ends that we will use this for x2 collect images. Now you can apply order filters. For example, I'm going to select first folders and folders. I have all those things. I can apply, something like Taiwan. And after inside Taiwan I can go on the right. And you have PLCs whole narrowed on search at more images, extremely images. You can apply narrowed on CH. And thanks to that, after you can apply, another filter can be something like camera. So inside my FOLDOC, Taiwan, I can apply another filter like camera. And it can be this Canon camera, just laziness. And now I have seven pictures, Sinek TED. And if I want, I can continue. Click here. Narrow, don't search. And inside these filters I can apply some sync. Different, again, like exposure. And if I apply exposure with this, I'm going to have just two pictures. So this is how you can apply these filters. You can apply just the first filters. And if you want, just after you can apply an order filters and on the under Filter and each time it's going to you will have more precisions. I will show you after that you can apply some title, color labels, tagging. And we will be able to use this as a filters in collect images. Now you can also change the condition. What does it mean? It means that here, if I just click on this, but you can also change to end or change to o, change to expect. So it means I can take pictures. And so basic is n, but you can change all lysis. So it means I'm going to have some pictures also different than this element. I can also change for expect. So I'm going to have also pictures in my taiwan folder. Expect pictures taking with Tikkun with this camera, just laziness. So each time you can change your condition. And she had the same, I can go excrete image. Just lazy. If you want to revisit, just visit parameters. So we have the Filmer after i can apply, for example, again, Sweden. I can apply Sweden like this. I want to apply, you know, doc condition. You can, for example, go. You can now hold on search, but you can also add more images. So we can add also images for something different. And it can be another folder. So it means isolated Sweden folder. And I can see it at the same time as Lynn folder. And because I changed and it was add, add more images so you can take pictures of z's filter plus pictures of this filter. And I have all my pictures with Iceland are my pictures with Sweden. And I can continue if I want, add more images. And this time I can select again folders. And I can see leak for example, portrait just like this. So now inside my image collection, I have femoral. I have my Sweden folder, I have my Iceland further, and Maya, my portrait folder. And you can also go on exclude images and you can do something different. So after I can exclude some seeing like you can be a camera and I can exclude the pictures from this camera. Also, just like this. And as you can see, if I click just here, I can remove my sweet pictures because it is not the same camera. So this is how to apply with collected images. You can, I'm just going to remove that. Chaos is where you can place your school. And here I can place this order. No, I have collect images with Sweden and Iceland pictures. If you just go on the spot, you can see different preset. And you can, for example, creates when you press it. And I can just create a preset with Sweden and Iceland. Sweden and Iceland. I can click OK. Just like this. And now I created my preset with Sweden and Iceland. Where does it mean? It means that if I just revisit parameters and I won't directly to have all my pictures with Sweden and Iceland. I can just go here and click Sweden and Iceland and touch it. And you can do the same process. Let just visit parameters. I'm going to select picture from Japan. And inside Japan, I can face on per, ad narrowed on search and civics. I'm seeing like camera with these canon, just like this. And I can add another preset. And store knew preset. I can make. Japan with camera cannot, for example. And I can click OK and validate. If I just visit or my parameters. And I want directly to exist, I can go on Japan with camera Canon and I have these two pictures. This is how you can walk with this filter. Something interesting. You can also just remove that. So here you can just go on the receipt and you can go on stone. You preset Preset Japan with cannon. When you change some things and just sets it. When you are on the presets, you can click here and you have idiots. This preset deletes is preset fugal edit. You can change the name. If you just go on delete, you can delete the precess, suppress it rises. So in principle, I can use Sweden and Iceland, and now inside I can delete. So preset. 7. Image information: We're going to see image information. It's going to be fast because not too many things to say about image information. So nice things that you need to note that each time that you click on an image sees I'm in my femoral. If for example, I sit exists image just like this here, I'm going to have in my dock homeroom, if I come back in my light table mode, I have also information. So this is part of fema world. Zc is image ID with the number. I ever saw my fake name in my folder on my computer. You have also's a pass on your computer and yes, you have also different information. You have the time of importation or so in duct table, you have many, many, many, many, many, many informations. You can Rousseau finds a models with your camera, which as taken pictures at the same time. You can also find information about exposure for calendar, date time sometime can be interesting and you have a so wide and eight on your pictures, you have also copyright. And each time that you will be able to apply metadata here, you will be able to have title description, Krakatoa, puberty, shell, tag category. What does it mean? It means that i six is pictures. I go for example, on the right title can tip some seem like Iceland travel description. Trevor, trip, Iceland, Crito, I can type some sink like Django. And at the same time, so here, at this time I have nothing but I'm going to continue because you need to click on apply. I'm going to click on apply shear. If I just go on the left in my image information, as you can see now I have title, description and crypto. So in principle, I cannot tagging if I want, I can apply some sink like travel on taking. I'm going to show you the softer and I can apply some sink like I sloan also address need to come back. And second temple. So Iceland and adzes as a time. So now I have Iceland and traverse. If I go on the left, I have tagged Iceland and travel also. So each time that you apply different information on the right, you will be able to have this on image information. And it's some testing because when you will have to export your walk, when you will have to export your walk, you will be able to export with all z's information, all this information or just selected information. 8. Recently used collections: Let's see, recently used collection, recently used collection. It's Z's can be used with collect images. It just means that we apply different filter in collect images, different filters here. And you can find just the Lascaux collection with the last few terms that we used. For example, we have creatine, so I'm seeing with xis, I can click here, and this is Sweden. I have credited something with Japan and camera. So I can click here and I'm going to find yes, just Japan and camera. And here as you can see, I'm going to have a Japan in Kamiokande on pro. I have these two pictures. I created some seeing WES Sweden. You can see femur arm folders, laziness. So each time that you see leaked, a recent collection, you can find the different filters that you used. Here. It was femur from Sweden, Iceland, and excluding portrait, for example. Here if I just click like that twice, just my folders. Japan here if I see like TDD xhat, It was my further Japan and inside nada filter with camera. So that's it. You just see Zoo last collections or less filters that you used before. Nothing more. If you just want to resist this parameter, you just click on the receipt. Just like this. No, I erased all X2. Use collection. If I just come back with Suan receipt here and raise it here. As you can see now, I have no sink in recently. Use collection, expect my fin run. And if I just apply new sings, the Taiwan and I can just apply some seem more like camera and just Canon camera. No, you have recently used collection camera, Canon camera femur on Taiwan and that's it. 9. Selections: Let's see selection. When you go on this path, you select here. And you can have different parameters to silico pictures. Here. I'm just in the femur. If you want to select also pictures, for example, you can just go and select all. And as you can see, the colloids, little difference of great colloids, little different. And I selected all these pictures. I just sometime you can select none. You deselect everything. You can also only select part of pictures. For example, I'm going to go inside my folder, Taiwan Frost. And the things that you can do, it's xhat. You can, for example, select a pictures like this. If you just select the pictures you have the possibility to see leaked. All of us invert selection. So here I select everything inside my folder. Now if I sample acidic sweeping tours, you can press shift on the keyboard, one. And I can go here, I can see these three pictures. And I want to ask the civil officer pictures. I can just go on invert selection and now I acidic ic t, z seven pictures. You can also use control on the keyboard to select specific picture. I can see in this picture control, left clicks it exists picture control left-click, select this picture. I selected this three different pictures. And if you use shift, you can select the first picture. So last pictures that you want to have and also pictures inside. So I can press shift here left-click and I selected says five different pictures. And each time you can invert selection. So now ICT, despite pictures on inverter again, these five pictures, you ever saw select and took pictures. And here it just when you admit your pictures into darkroom world, you can take a glance of beta2 pictures with modification and picture wizard modification. You have also civic film, horror flick femur. It's interesting because you can, for example, go on directly on all my femur of these pictures. And this is a picture from Iceland. Iceland. If I just click on civic field morale, He's going to select all the pictures in Iceland folder, just like this. So diseases, diseases, and also here, just like that. If it is on per IC Lee, I take a glance on portrait. And I'm going to select one image of this portrait. I have just three image with portrait I sit exists and I go on select fieldwork. He's going to select t, my sweet image of my Patriot folder inside my femur. And after you can invert the selection just like this. Again, invert selection, you can sit everything silicon none. But you are going to tell me why it's interesting to disease. It's interesting because I'm going to show you after you can apply different things or so pictures like style, like metadata, like taking, let's take against about metadata. And I'm going to select my taiwan folders and I want to apply the same title on all my pictures. It's useful because I can just click on select all title. I can tap Title. I can just dip Taiwan. Dress like this. I can click on Apply. And it's going to apply on all the pictures that I have selected. It means that I see these pictures. I have Taiwan. Segues is pictures I have Taiwan. I see these pictures. I have Taiwan. So as you can see, it's indistinct. You can apply on different a meant. You can apply it to some tagging on different things, but I will show you just after because I will apply tagging, I will apply metadata on some pictures. So we will use selection. 10. Selected images: Let's see, selected image. We selected image. You can remove image, copy image. You can duplicate image, Move image directly from this software. So it means you can walk on that table, but you can walk also directly on the folder on your computer, on the image on your computer, sees a reason for wheat for which you need to not make a mistake. For example, you have remove and trash. Remove. You only delete pictures from that table, but you keep that on your computer. If you use trash, you are going to send phi to trash from your computer. So be careful about that. I'm going to select a file, for example, Taiwan folders. And first I'm going to duplicate this image. You can just go on duplicate lysis and they have the same image. If I want, I can take this image and also duplicate disease are against this image and duplicate laziness. Now if I want to delete an image, you click on the image like this and you can just go on remove. Do you want to remove when he met from the collection? Yes. Because I can remove that because I duplicated this image and it is for that table. Here I can click on remove. Yes. And here I can click on remove. Yes. If you click on trash, Be careful. He's going to ask you because you will remove your pictures on that table and also on your computer and also on your computer. So be careful about zaps his arisen far, which I'm not going to do this. You can also have the possibility to move your pictures on our computer. So it means you just select two pictures. If you just click move, you can find just on your local file, local folders. And you can select to know their folders. And you will have just to click on select as destination. And things to that, you will be able to move your file in your inner odor destination. And it works the same like if you use copy. So some principle you can cookies image in another folder using select as destination. No, I just show you duplicate. And you can also directly crowd partition on your pictures. If I just zoom in it. Just like this. I say is this picture's rotation. Ngos on the erection. If your crop rotation, you can also just apply receipt. So a krater rotation, rigid rotation and I can come back at the beginning. You ever saw the possibility to copy locally, just like that. And I created a copy of this image directly on my computer, directly on my computer. You have a system with group on SK. We don't use to merge two group, but I'm just going to show you the principle. I have two pictures with beach here. I would like to create a group. I sit exist pictures, control silicosis pictures also. And thanks to that now I can create a group. You can create a group with different pictures. And yes, now I created a group. What does it mean? It means that if I click on this pictures, as you can see, I have an orange rectangle, like xat is these two pictures take parts of a group and sometime try to group can be, are useful to approach different type of multimedia application on chairs. If you just want to click, Ungroup, should just go here. And Ungroup. And thanks to that. Now as you can see, I don't have, so orange rectangle. So it means that I removed group. You have ans arrived just metadata and you can just use rating tags. Coolers are some symbolizes. So you can copy and past differ on metadata from a pictures, two pictures. I'm going to go in my portrait for the US. Select these pictures first. Into comeback in light table. Let's just apply metadata editor. Title. Can tap. Portrait, woman. I can make description. Picture portrait, human and Crito. I can type something like John to. If I just apply this. Now it's nice as you can see, if I just click here, I have this different meta day tape. If I just come back to my selected image, I can take this image, press control. Sid exists image also. I selected this to image. If I just go on the right, I can directly copy some metadata like rating Carlos tags, metadata Joe tags. Here. I'm not going to past copy pass rating or collapse of tags because I didn't apply tags again on show tanks, but I can apply metadata. If I just click on. First, I sit exist pictures first, I can click on metadata cookie. And now I sit exist two pictures control. And I can just go on past laziness. I passed this is metadata. What does it mean? It means that if I CityX is pictures, as you can see, icons of meta data editor. And now you have the same title, same descriptions is same crypto for the simple reasons at I copy and past. So may tie day teh. Same principle. If I click on these pictures, I have also passed my metadata here. And you can do the same thing for rating. You can do the same thing for Carlos tags, Joe tax. Each time you have also the possibility if you apply some seem to just click on clear. And as you can see, I don't have my, my metadata here. If you click on classes or same principle should just click here. You can apply just here, and you can remove elements and principle if you have a rating or different was element sets it. So this is a type of things that you can do with the selected images. 11. History stack: We are going to see a story stack. What is history stack? The M is to make adjustment on the pictures in Sudan crew mode. And after you will be able to cookies this adjustment and pass to other pictures in your light table mode. I'm going to take my japan folder and let's apply some adjustment. I'm going to select this picture first, double-click and enter in Sudan from mud. So darkroom mode, I have different possibility. We will see that in details after I'm going to go into buzzy groups just like this. And I have phrase ample contrast brightness saturation. And I'm going to increase the contrast and increase the saturation address into heavenly told brightness. And I'm going to make a little bit more just to show you the address meant. It's okay. So i apply this adjustment. Now I'm going to come back to the light table. Mud. As you can see, the pictures is little different because I have my address meant. Let's zoom just later on this here. And the fact is that I'm going to zoom also little bit more. The fact is akin and go on history stack and cookies. This is story, whether you can sit with just copy. And thanks to that, you can see the different models. By default, you will have input and output models by default. And here as you can see, you can have also modules orders. I can advise you to keep that. And I have contrast, brightness and saturation like this. She just made one adjustments. So I'm going to civic all just lysate, silicone validate. And if I just go on these pictures, for example, I can just go on past our past. Or if I just click on past, I can select some models because I passed I civic trust output. You can see the URL if you want, but it's not going to change anything. And if I just click on, I'm going to apply this adjustment also on these pictures. If I see is this pictures some principle, I can just go on past all. And as you can see, I have the same adjustment. So when you have an adjustment on your pictures cookie, you have the different element. And if you just go and copy all you copied directly also adjustment and you can apply on odor pictures. Something interesting to know is that, hey, if I just go on, go on. Right here, you have Kopi past compressed is the rediscovery story an image. It means that if I see it says pictures, control these pictures, these pictures, and I want to remove the history I can go on this current is story. They exist, yes. And I'm going to have my pictures like before. Let's take another example. I'm going to select Iceland folders and take a glance to the first pictures. Double-click, and I move in my darkroom Mudd. Lets apply different adjustment. In this example, we are going to increase the contrast. And at the same time I can walk with shadows and attracts. So it means can creates a shadow, for example, decrease, increases, shadow decreases at lights, change the y sprint adjustment like this. At the same time I can continue and apply more exposure on my picture's. Just laziness or example. Can use wise balance increase with temperature. Just going to make everything that you want just to show you is a principle. Now, if I just go on active Modules on the left, I have also sings. When we copies of parameters you will be able to find. Also sings with the input current profile, output current profile and all our different adjustment. You ever saw orientation? Orientation, we can remove that. Here. I remove orientation. If I just come back to light table. Now you have my pictures with the adjustment. And again, if I just go on cookie or I copy also parameters, and if I go and these pictures, I can go on past all. And I can pass the same parameters. If you click on this picture, you just go on copy. You can select not every sink. As you can see now you're orientation of because I removed that. And for example, you can, If I don't want to apply your If I don't want to apply. If I don't want to apply is a wise balance. I remove wise balance and just click on OK. And if I go in these pictures, I'm going to go on past and I'm going to past models, for example, wizards, the wise balance. But if I want, I can also click on wise balance again. And I can click on okay, and I'm going to have my adjustment wizard who's a wise balance. And it's great because one more time you can, I can select this picture. If I just go on cookie, I select all validate. And then I go and Selection, Select All, I selected all my pictures. Here. There is going to change the view. And if I just go on past, all, I'm going to have this adjustment on all those pictures past are just like this. As you can see. So you can copy adjustment of when pictures with the different models and you can pass onto pictures that you want to have, see some things that you need to understand. And as you can see, it's useful to use selection. Now if I just want to remove everything, I can select all like this. And I can just go on the right discount the story. Just discount Historia can take. Yes. And now I can remove with my basic pictures. And if I come back to this picture just like this, as you can see now, I go on my active modules. I have no fussing because I erased so different adjustment, Caesar. So something that you need to know when you have some adjustment if you want to arise this you can directly go on history stack and you can go on discount history. Just like this. 12. Styles: Let's see styles. With the styles you can on pictures crud different adjustment with the models. And after you can copy these different adjustment, Crito style, change the name and you can apply this type, this type on also pictures that you want. I'm going to select my taiwan folders and crud style with contrast. Let's see, leaked these pictures. Double-click to enter into Doctorow meds. I'm just going to go on my adjustment here. Contrast, brightness, saturation and increase. So contrast, willing to increase the contrast, just laziness. After I can walk you tell wizard exposure here. And that's it. If I just come back to light table exists, I can just, I'm going to decrease the turns out to see bitters. I can go on style. And here you can create a style from this pictures. Inside you can include different models. By default, you will have each time input, output orientation, different type of display. And here as you can see, I have exposure and contrast brightness saturation. If you just want to apply contrived brightness saturation, you can just apply this. Here. It's luxury car. I'm going to apply everything. And I'm going to create a new style with contrast. After you can click unsafe. And thanks to that, I have a new style contrast. Let's create a nose or style. I'm going to sit exist pictures. And we are going to increase the saturation. And Francis, I have different models one more times. And I can just go on Z sub part and just ceilings of basic adjustment. And basic adjustment we have saturation vibrance. So here I increase, I increase saturation first, like this. I'm going to increase vibrance and saturation. I just sent them, I can go in my cultural group. Use valve also increases trait. Let's do some symbolizes. So I increase the carlos beta saturation. No, I'm just going to come back to light table. And also I'm going to apply something to show you again. And let's come back to the basic adjustment, shadow acolytes and just movie tells the shadows. For example. I come back on labor. Here, I changed my pictures. I can create a new style. And here. One more time I Gonzo, right? Create from these pictures. And I can, if I don't want to have shadow and light because it's not useful to crowd my style. I can remove that. I can just type. I can remove that and create two nodal style. Or if I want this, I can just drag and click here. I'm going to apply saturation. And just go on safe and let's scrap to lifestyle. Let supply phrase on per annum order. Let's take another pictures like his pictures. And let's increase the details. If I want to increase the details, I can go on the right. You are, for example, you have different things like sharpen and you can increase the radius, increase amounts, and things to that. You can have better on details of Derek and walk with three URL, but let's increase a month. At the same time, if I just go on basic groups, I'm just going to not use Shadow at lights. And the things that I can do it just to see leak some sink like if I want to increase details, if I want to increase details may be I can apply also contrasts the fringe. Yes, I'm just going to apply our solitary differential and increases, just lays out. So I increase the details on these pictures. Now I come back on light saber and accurate to a new style again, Guanzi right here. You can click that. And I'm going to make details and click on save. What does it mean? It means that I can go on everything that I want. For example, if I want, I can go and my Norway norway folders and I can apply some picture sittings, these pictures, and I would like to have my saturation style. I click on saturation. Here. You can click Apply. And thanks to that, I have my style. I can click on these pictures and sound principles saturation applied. If I want to have my contrast, I can click on these pictures. Let's click on contrast. Apply just like this. And you can resource silly, different pictures. If I want to increase details on these pictures, these pictures, these pictures, I can click here, control sees this. I selected the swift pictures and I can click on details. Just like this. I can also apply details and also for us details apply. And I can also apply details and after away not saturation. And so if you can apply to style on the same pictures. And if I just go here after each time, you can edit some parameter. For example, I have details and you can go on edit. And you can change that, can change the name you can do prior to some description. And if on details I want just to remove shadows and at lights, I can click here and save. And it's going to change later on my pictures. And so in principle, if I just click on saturation, indeed, if I want to remove a vail Via on mice or saturation sti, I can just click on save and remove Sylvia. And that's it. After each time that you seek some Seeing, you can also remove your slides. And you can remove your status here. So I can remove saturation. Just click on Yes. And as you can see, it's not going to change my change for the pictures. And if I want to remove details, I can dress click on remove CSS. You can also duplicate the style. You can click on contrast, crowd, and duplicate. If I Want, You can craton duplicate your style. It's also possible. And I'm going to click on contrast and just remove. That's it. Now if I just want to come back like before, it's just simple. Can just go on. Visit parameters. Select all my pictures, guns, alright. Select all, and go on Easter restock, discount the story of my femur and thanks to that, I can come back. Yes, it's nice. So this is how you can create different styles. 13. Metadata editor: Let's see. So meta day teh editor. Here we have metadata editor. I'm just going to select a file-like Iceland. And I can apply different, different metadata on these pictures. If you just select one pictures, you will apply some meta data only on one picture, but you can apply on the pictures that you choose. For example, I would like to apply title and descriptions to Sam on orange, these pictures inside this folder, I'm inside this folder, I can just select all just X-Y-Z. And if I just come back, I'm going to apply title Iceland and description traversal in Iceland. Just like this. Now if I just click on apply, as you can see, I can deselect everything. If I click on each pictures. I have Iceland and traveling in Iceland. Some principle I would like to apply John Doe and removes a copyright. I go and select all again. And after I can change the title, Crito, I can tip John DOE. And right, I'm going to remove the right, just like this. Click on apply. It's nice. And now if I click on all these pictures, I have just title description krypton. You can also apply publisher. You can also apply some rights. And you can also apply nuts. That's it. Something interesting is that after you can defer, I want to make something with more specification. Just going to show you something different. Let's go in Japan, Japan folders. And so in principle I select everything, just lazy Select All. I can go on this path, tighter. Japan description. Trevor in Japan. So Sam tried to join, do and I'm going to remove that. It's gone. Apply. No, Here I have, for example, something like the Caesar. Here's a series of temples or you have breach. You have a nice bridge here. And I can make some specific nuts. I can make something different. So here I can type some sync. I can still exists pictures and I can make travel in Japan. Matsumoto slices. Here it's something different, it's Kyoto. So I can make travel in Japan, for example. Kyoto. Just lazy is. So you can enter different things. Here. It's Tokyo, can make travel in Japan, Tokyo. And you can also apply some notes, everything that you want each time you need to click on apply because I forgot to click on apply, traveling in Japan, map to motto and just go apply. And here, traveling in Japan, Kyoto and here just apply. So as you can see, this is how you can enter metadata. If you've gone this part, you have configure metadata. And you don't have many things to do it just to, but you can some metadata. So it means when you will export your pictures, you can expand some metadata wizard you can take on. I don't provide just a bad sat. And yes, that's it. And this is a type of things that you can do. And on each further here I can go on Taiwan already. I created something with Taiwan. And after I can change after can coexist pictures, let's come back on late table. Can take this picture shift and these pictures, and these pictures. So here's this picture controls these pictures, these pictures. And if I just go on my metadata, I have the Taiwan on these three pictures and description. I can make beach in Taiwan and cracked or if I want, I can make John tall. So something different. And such type of things that you can do. Let's go on apply. If you want to just remove a metadata on under pictures, on our different pictures, you just need to select the pictures. For example, six is pictures and clear. And here I remove all the meta data, sets it. And as I told you, you can, for example, I can come back to this picture. I can come back on my civic t. I can come back to my selected image. These pictures go on metadata, just copy. So metadata, just like this. Copy here. And if I just go in these pictures, I can go on past. And thanks to that now if I come back on these pictures, I have the same metadata because I could be passed. So you can change between so different part here. You can use, you can see the selected image. You can use metadata or so taking. And it's something extremely useful just like this. It's also useful because after you will be able to go on the left collect images. And for example, you can apply some seeing with again apply something with metadata. I'm just here. You have tagged, you have color labels, you have title description, and I'm going to select title. And here you have also pictures with the tighter, for example. And I have ten pictures with tighter Iceland, ten pictures tighter Japan, ten pictures with tighter Taiwan ends. That's it. And if you go on this path, you can also make some more search. And yes, that's it. And these are some principle if you tap some sink like instead of title, description are just Crito like this. I have 23 pictures with John Doe as I, as I, as you can see, and not define sati, pictures crystallizes. So this is how you can enter metadata. Here you just have received parameters. Just going to show you, if I just come back to frequent pictures here, just come back to life table. And yes, if you just click on a result parameter, we are not going to change any settings. If you want to really rise, you need to click on care. 14. Tagging: We are going to see tagging with digging, you can apply different tags on pictures. I'm going to select my taiwan folders. If I want to apply your tagging, you can directly type something here. And the things that I can do also eats that you can apply a tagging on different pictures at the same times. If I just go here, click on select all. And I can just go on this part. I can just tap my first tag, enter tag name. So I can tip Taiwan just like this. And here this is going to be my first tag. I can press enter. And since 2-SAT now I have my ten pictures with this tag. And I can do the same things. I'm going to type something different, like Trevor can press enter and directly I have my new tag and directly all my pictures with this tagging. Let's continue. So here it's okay. First I have these two tag for this element. Now I'm going to deselect every scene. You can apply different tags on safety pictures. For example, you have this pictures, I can press control these pictures, these pictures, and I have beach. So I can just create a new tag with pitch, just like this. And thanks to that now I have just my sweeping trails with beach. I can select just this one picture and press control. This one picture. I have temples. So let's do this again. Acidic sees pictures, controls these pictures. And I can create a new tag like temper and can press enter. Here, it's city. So I can just sit exist pictures and I can just create a new tag like City. Yes, that's it. And here are so for example, a yes, I have raised here why not to tap some single eye for arrest? Yes, that's nice. And you can create differences. I have a bridge here or so. So why not to apply some sink like bridge? That's it. Each time you select you guns, right? You can see number of pictures with the keywords wizard tag. Taiwan. If ten pictures traveled, ten pictures, beach sweep pictures. And you can continue with that. And I'm going to do the same principle with another example. Let's go in Japan and select also pictures first. Go on select all. And I would like to apply directly. So same keywords. First, I create a new keyword with Japan so I can just press Enter and I would like to apply also travel. I don't need to tap travel again. You can just click on travel here and double-click. And you can have traveled here. And as you can see, no for travel, I have 20 pictures, might ten pictures of Taiwan and my ten pictures on Japan dressed like this. As you can see here. I have a bridge. So I can click on Bridge and way down, double-click whether attach. Here you have a bridge here. I can click on Bridge and attach just like this. And I can add more things here, it's a golden. I can create a new keyword like GAD cantons, sets it. Here. I have a river. I can craft a nucleotide River here, Hallelujah for late so I can taper. So Lake enter. And that's nice. And that's it. Here. I have another river, so I can just double-click on the river. Here, the seas Street so I can type a new keyword Street. And yes, that's nice. So if I just press this view, is this picture, this is a garden and at the same time to be a golden it CT, I'm just going to apply downturns. So I can go counter and double-click ends up feet. And you can do this for all your folders or your pictures. I can go in Iceland induces some sings. So it means first I select all my pictures, select all. After to select All, I go on tagging. I can tap Iceland. First, press enter. I apply ten pictures, forces tag. I can select travel, attack, NIO IF sati pictures for traverse. And as you can see shy of Lake. So and here also I can press Control and apply double-click on Lake. Here. I think kits. For example, I have a rod here. I can apply a new keyword like crowed. And here you have the ocean, can apply your new key, warlike ocean, and that's it. After to try different keyword, high absorption again, double-click on ocean. Here. It's relay catching. Already ledge. Here you can see sushi and I can double-click Oceania again. And you can make what you want higher montane phi 1A can create a new keyword, WES montane, just laziness. And that's all he had. So Lake I can apply lake again, and that's it. You can also exit your different tags. Tags here you can change, show, or not show deductible tags. If you just click Show, you will have just dark table format, jpeg, just your format of file. And it's not really useful. I'm just going to remove that. And you can also toggle sought by name or by cons. So weighed down by name, weighed down by current here. It's about this part. But by count, you are going to have your first tags with some, most pictures inside. Here, it's traverse sati and after Einstein, Japan, Taiwan, ten n less here. If you're just Chen's out, it just going to be by alphabetic order, OS, alphabetic order. So it means for a skater is b, c, If I just lysis. So you can just change here. And you ever saw toggle list with wizard RTI, but here it's not going to be really useful. I can advise you to keep, I think it's great to use by name. It's not bad, but also by number. Can be great. If you just want to remove a tag, you can just go on the tag right-click and you have different parameters. You can phrase on per delete tag. I can deletes a tank here, just like this. Here. Let's do this again. I'm going to apply shy delete Street. You can also go on right-click and you can detach tag attached kept tags. So she agitational tag of these pictures are right-click. You can attach the tag so you have different possibility that you can set you can do here. Just like this. You can also removes a tag or yes, detached, detached delete tag, also the two works. And you can edit tag. If you go and edit tag, you can change the name, just lazy so you have your name and you can change out or so share. So it's these type of things that you can do. Why eaten testing? Because one more time, if you go and collect images, you can, for example, go on tag. And on tag, you can tap some scene. If I want to have all my pictures with a beach, I can just type tape beach. And as you can see, I have three pictures. I press and that's it. You can see the tag. And if I want to see all my pictures with, for example, wizard late, I can just tap Lake. And as you can see, press Enter, OK, double-click here. I have my four pictures with leg. And it's good because you can have many, many, many pictures of travel, for example, of landscape. And you would like to have also pictures with Lake. It's nice you can find different picture who is like you want to walk with a pictures with a beach. You can just type beach with a garden. You can just enter gander, as you can see. Can you turn down down also press enter, and that's it. If I just come back here, receipt. So Parameters just go here. As you can see, you can also have different scenes, but it's more like title, description. He's not going to be really good for taking. So this is how you can create and apply tagging. 15. Export selected: We are going to see how to export silk TD image. So here you have experts selected. What is the m? So m is that you have different storage option with target storage. And here you can have send an email file on disk. You have different possibility. So here I can use, for example, file on the disk. And after you can change the firewall, you want to export your walk. So you can just click here. Here I am in my document photo and I can export, decide to export here or I can decide to export inside another folders. And after you click on silicon as output destination, just daisies. And here you can create unique finite over wise clip. So I can advise you to credit union finance for the simple reason. If you export in the same folder that you have already, your pictures, your basic pictures, thanks to yet xhat, you will add another folder. So will have, you will have your original folder and your folder after two AD with the different parameters. You can change the five format just like this. So here, JPEG, fine, one of the most used, but you can also export indifferent to file-like PDF, PNG. Also, if I exploit in GPA, you can walk with a quality after you can work also with global options. Here you can even treaty changes size and after you have different parameters. Here, I can advise you to keep, for example, profile. This is a profile of your image sitting generally you are going to keep that, but you have odour profile and intent image sittings or so. And here you will be able to export your walk. Here you have aged metadata exploitation that they take can be interesting because here you can make the choice for his own PR to export your metadata. So it means that when you click on the pictures are for example, or if I click on this pictures, I can have, I can have tagging. I can have also metadata editor with information. And depending on what you are going to choose Here, you can have information or not in your folder on your computer. If you apply metadata, you will see that on your computer, you will go right-click on your folder and you will see some metadata. Can also interrupt geo tag if you want to tags here. And yes, that's it. So you can make the choice to export with some information on just export your walk wizard, those information, just laziness. So this is the type of things that you can use after you select your pictures. For example, I see these pictures and I just go on expert and I have Exporting one image. What does it mean? It means that if I go on directly on my file, as you can see, I am my image expertise here. So after to work with different models to make some address man, you export your walk and you will add your file here in civic TD destination on your computer. And if you select different pictures that you sometimes see these pictures, and I can press controls these pictures, these pictures. I'm going to go on Export, Exporting sweet images. I just want to show you that you can export different image at the same time. You can export, can take for example, Taiwan. And I can select all the pictures here. And I can export also pictures if I want. If I just take a glance again, select here. Directory, as you can see I up or these pictures, experts in eggs, protein crystallizes. So you will have your original original file. I have my original file folders and I have phi with modification. It's exactly the same number for the reasons that it's not inside the folder. If it's inside the folder with the basic image, you will have just 01 or 02 or some similar disease at the end, just to not have exactly the same, exactly the same name. So that's it. After you can change this JPEG, don't hesitate. If you want to have something different like PNG, for example, you can change and work with your quality. 16. Darkroom mode: I'm going to show you so darkroom mode. Let us see how to start with the decrement you need when you are on a light table mode here, you can start with a picture. I can see these pictures double-click. And I can enter into darkroom mode. When you are in this part, on the top left corner, you will have a view of your pictures and you can zoom in, zoom out with that. If you just click here, as you can see, you can have small phi2 screen. So it means I can go here and zoom at 200%. And after I can drag and move on my pictures, I, if I want, I can zoom at 100% and drag and move on. My picture's just lazy. If you want to come back, you have fit to screen and you will have your picture fit to the space in the center. At the same time you can ever small also, and I can come back to fit to screen. You can also zoom on your pictures disease with most, we'll scroll wheel. You can zoom here and zoom out, zoom in and zoom out. When you go on the left you have defined parameter here like snapshots is storage. You pick and manage our color picker tagging image information mask manager. I will show you in details, all those principle. If in the center you will have your pictures to edit and on the top right corner, you will abso histogram. I'm going to explain how to use this histogram. Something extremely interesting. When you go in this path, you will find also models to edit your pictures. You are first active models, but after you have a favorite modules, I'm going to show you how you can apply favorite modulus N. We will choose ten favorites models. You have basic groups, tongue groups, color groups, correction groups, and groups. That's it. So this is a type of things that you can have. You have modular Anders. And here I'm going to show you that we have more murders and we will choose a different mothers. As you can see, you have the different pictures here, depending depending of depending of the folder where you are in your collection. If you use if you use most, most, most window, if you use the mouse wheel here, when you are at this level, you are the first pictures in Jamaica. If you use the mouse wheel, you can move all your pictures to see. And each time that you select a picture, you can edit that. Cgs is pictures, sexist pictures, and I can eat it. So it's useful because you don't need to come back every time to the late table mode to select an older pictures. You can go directly here and you can have pictures. Just lazy is you can also come back in light table. And if I want to edit picture just inside my folder, Taiwan, I can click on Taiwan here and double-click on the frost pictures. You can also go directly into Docker mode, but he's going to say no image to open. So you need to sit exam and after go into dacron mode. And when you just here, as you can see, it's you will have each times the first pictures in the middle. And some principle you can drag and move, drag and move to a better view. You can also change the size. You can have a double arrows and you can drag and move to change the size of these pictures. And if I use again my most, We'll I can move on this direction to see my pictures. Can advise you to not take too much place with these different elements. This is the same. You can also go here and you can drag on the left are so as you can see, you can go on the right and you can drag and move associate. But I can't advise you to not move to not move these two merge, I think yes. Around this, but I think it's nice. And yes. Around despite it's nice. And she and just to have small view. Just two small view I think. Yes, I think it's interesting. It's interesting. You need to have a place to see your different adjustment. You need to have place to see your different adjustment. It's better. Sometimes if you want, you can also go on the left, can drag, you can change that and you will have more space here. You can also go at this level if you want. Yes, that's it. So it sees Isaac and I can come back just like this here. And yes, this is how to start with the decrement. 17. Apply modules: Let's see, so different models when you're gone this part you can apply different models. And at this time when you start with a software, you are going to find more models here. And every sing with is not in gray. This is models that we are not activate where I'll not activate to walk in. So it means when you start at the beginning, you want AV directly favorite models. And you have directly at the beginning some models here, some mothers here, some mothers here, some models here, and some others here. Each time classified in different categories, like buzzy groups, don't groups, Cullen groups, correction groups, and effect groups. You can take a glance on models and you can apply just Momo Darcy for example, Sikh local contrast. As you can see, it's not selected. I can click here. And now I will AV locale contrast on one of my mother's. So it means local contrast. You can just go yes, for local contrast, as you can see, you need to go in the tongue groups, and now you have local contrast. Each time the model will go directly in the corresponding category. That's it. You've gone more models again, if you select, for example, just to some sink like you have worked at scale vibrance. I can apply vibrance here. If I just apply vibrance, and now I go on my color groups of models. I will find vibrance here. And if I remove side, you just click here and double-click. And now if I just come back to my column group, as you can see, I don't see v parents. So it seems that we are going to do at the beginning in just to apply or mothers. And after, I will explain the main part of this models. So apply everything. You click on each models that we are not selective. And let's apply also models first. Just laziness exists like this, lazy is like this. So you just click to exist in gray. And it's nice. Now as you can see, everything is in gray. So it means that I have all my models are my models. So things that you need to understand is that now you have many, many models. Sometime it can be yes, liter, disturbing because you have many, many modalities is a reason for which I am going to show you how to create your favorite mothers. So we have also models are things that you need to understand. It's not possible to change. To change the order of shelf models. You have Module order here, but it's just current on the other. You're not going to be able to change the location. It's not possible. Each time that you click on the models, you can open this and we will be able to edit the image. 18. Import folder: The first thing that we are going to do is to download the folder with different pictures on which we are going to work. So for this, I go in the light table mode, go import folders. And I tried to add a new folder on landscape here. I can just select that and click on open. Just laziness. And I imported, as you can see, 20 different pictures of landscape. Since this is a simple textures that we can find in the different folders here. I decided to selected 20 pictures of it and to import in your new files. Thanks to that, it's easy. I can just select my landscape folder. Just go on Doctorow mode. I can select the pictures and we are going to work on these different pictures, just slices. You can use the scroll wheel. And each time we will be able to change pictures on pictures just with a scroll wheel here. And it will be convenient with these 20 pictures, we are going to see many, many different things using the models. 19. Active modules: I'm going to explain the active modules. Here you can have show only active models. It does testing because when you apply different models, as you can see, even if you can position these in your favorite. We can have many, many models. And it's great to have a summary out what models used in your pictures. And Francis, You can see leak show and only active models. By default, you will have every time output column profile, input column profile, you can change up its normal Each time on each picture, you need to have input cooperate phi output column profile. By default, you will have also orientation here. It's not really, you can use this, but it's not really usefully just like to create a partition of your pictures. So I don't want to use this. I can just Decree. I can just click here. And now if I move and I come back, as you can see, I don't have orientation. Lets apply our favorite models and just going to make some adjustment, contrast brightness saturation. And let's increase the saturation deter brightness, MR. Contrast. Now, as you can see, I have on the left, this icon is in y's y, the red icon is in gray. Icon is in y. It means that some models is active. And it means that if you go on show only IT models, you will find this model here. Contrast, brightness, saturation. So it's times that you apply your model. You will have the icon in white, and you will have this also on active models. I can go and sharpens can increase. So details of my pictures with sharpen just slices. At the same time. Let's continue. Akin, go in. I can go in shadows and lights, which has drag and move some shadows. I can increase it as shadows, decrease liters at lights, just laziness. I can go on my bicycle adjustment and thicker glands. He turned black lever corrections, increase V saturation increase vibrance. And these pictures. And yes, that's it. Now if I just come back, you can see is different. You can see on my favorite models, everything is wise. It means that you have models active. I have 1234 active models. If I just go here, I can see that also all my active models are here. It's great because if you want to make some modification, you don't need to search every time where all your models you can directly go here and you can make modification. I can come back contrast and contrast for example. And that's it. If you want to just remove a moderates because for example, I don't want contrast brightness saturation anymore. You can just click here. You remove that, you remove the visibility. You remove SIS model as active. It means that if now I just move on, something laziness and I come back, I don't have my models, brightness, contrast and saturation. Because for, because I changed that same principle. If I remove that here, I click here, I click here, and I click here. I move, and I come back. As you can see now, I don't have any more any active mothers. 20. Module sharpen: Let's see some other sharpens that we add in the favorite models. And this models we can work with radius first. So you can mix the reduce of hero, chaperon and at the same time you can have your strength with a month. So among you can increase the strength of your radius. So let just zoom little first, I can go here and I can increase. As you can see, 50% can be nice and I can drag and move on my pictures. Let's take a glance if I increase the radius just as you can see the difference. But so details. At the same time, you can use a month and you can really see the difference here. It's too much, but I just want to show you the difference. When you use three, you will be able to make adjustments. So it means to reduce, reduce your effect. You enter reduce amount and with three old you can reduce your effect sizes. Just isis. So if it's too much, you can just move suite and you can try to find the right adjustment. But you are not obliged to use three or you can just walk with radius and amount, just Isis. And we have so much more details. If I just zoom a little bit more, let's take a glance here. You can revisit parameters. So it was before and I can recede parameter. So I moved here, so it was before and now I can increase the radius and I can increase the amount. You can see the difference and it's nice to really increase the detects. Let's revisit the parameter. I'm going to show you another example. Let's select this pictures. I can just go first on fit to screen. Okay, increase the details, go and sharpens and radius. And a month, just like this. And you can see the difference. So that I can do also, it's just to really show you, I can just first removes that. Go on, snapshot, text, snapshot lysis with sharpens. And now I can increase the radius, increase amount. And we are going to see the difference. If I just use sharpen, you can see on the left we sue chaplain and on the right we shop. And you can also drag and criteria Titian whizzes. And yes, you can see the difference if I just zoom a little bit more, control and screen wall. Just lazy IS here. It's not going to be really good because I need first to, I need for us to zoom. So I'm going to remove sharpen here, zoom first, just laziness. And yes, that's the difference. So you want to increase the details. You can use sharpens. This is something very basic but very useful. 21. Module levels: Let's see. So muddle levels. With the modal levels, you can work on sublet prey and you can walk on the grey prints, a waste print. You can walk also on different things. When I openly verbs with these pictures totally on the left, you can see some black print. In the middle. You can see it's a great point. And on the right to waste print and things to that you will be able to walk on shadows and lights. On this part, I'm going to have the shadows and on this path at lights. If I take a glance on my pictures, in fact, they could lens on my pictures. I have shadows, concern Xerox, and the applied concern, the sky and concern also is the ocean. If I use my back point, I'm going to make more black, more shadows on the rocks part. Just lazy. If I move my black print, I just sometimes a great print is going to move. Just like that. If I move the Y's parent is going to be the opposite. I'm going to add again more at lights and the sky and non-zero sham. Just like that, you can reinforce a contrast. If you move your black print, you move your y's print. As you can see, I'm going to have more contrast between multi pheromones between the lights and the shadows. You can make after adjustment is okay, great print, just ICs. So mall here, Alma here. So I'm seeing interesting. And if I want I can make some seen here. You have also a note to adjustment. When you click on auto, you can have this type of resume, have litters, a black point here. It tells a widespread Xia. It'll be more contrast. And this is a type of things that you can do. And that's it. Yes, you can drag liter here, can drag littered here, and increased determines a contrasts make adjustment in the middle. Now, if you want to visit each time you go on this part, you can also change pig black print from image. If I pick, pick a black print. For example, here, I can move and see where will be located to black print on my curve. So if I take this part, you can see such a Coursera is going to change and the line is going to change. So you can pixel black print here. At the same time. You can do the same process with a great brand. So it means you can select your gray print. For example, you can desert, and you can use this to select. So why sprint, and it can be so Skye for example. And thanks to that, you can move your different parasol. You can also walk wizards this curve. You can change manual for automatic things too, that it's simple because you just have black. You can just edit with blacks yourself with a great Yasser, in which the wise cursor, black status 0 grey, 50%, wise, 100%. And I can do the same thing. I just need to move returns. A black exists. And if I just move return, I'm going to have this result and some principle with a wise I can drag and move on this direction and I can reinforce ASU contrast or so. So I moved little black on this direction and neater wise on this direction, you can reinforce a contrast. You can make adjustments with a great print. Also, just phases. So this is the type of things that you can do with levels. If I just take another example like this, we don't see too much zoo park, we don't see too much building on. So bank runs, because exposure is not truly goods or shadows are like, I'm not really good. I can use liberals and for example, I can drag and move my black print. But here it's not going to be really good because I need to also move migrate print here. And if I drag and move migrate brain lynchings of black print here, I can change this exposure. And it's interesting because I can drag and move and have a great result if I just move my grade print in this example that I can read, frosty turns a black print, movie turn, widespread disease. And I can move the grey print two halves the render set I want to have. And if I just take auto on these pictures, just like this, it's not going to be really good. But because if I click Auto nothing up and on this picture almost nothing happen. In this picture can just move the grey part. And you can have bit render for this element. 22. Module contrast brightness saturation: Let's see. So model contrast, brightness and saturation. This is some basic adjustments that you can do, but extremely useful and efficient. Let's take these pictures. Contrast is the difference between at lights and shadows. You can see the shadows at the level of Xerox. You can see so at lights on the sky and on Zao Sheng, I can reign frozen contrast. If I drag and move contrast adjustment on the right, just laziness. At the same time, I can decrease the contrast, so less difference between at lights and shadows. If I move my cursor on the left, like this, generally it's better to increase the contrast. In some example we can decrease also contrast. We can find also brightness. So it means to add more light on your pictures, increase the brightness just like this. Or you can decrease, so brightness. And you can also work with saturation, increase of color. I'm going to show you an example because on this pictures is not going to be really good. Let's take another example. I sit exist pictures. It's nice because you have more colors. Here. I can use contrast. Increase or contrast, decrease of contrast. Increase contrast, decrease of contrast. Contrast is better to use when you have when you can really see on your pictures at lights, shadows. And in some pictures like this, when you have many colors, you can work well with a saturation. Saturation is to increase the colors to have better render of. Also Carlos can increase my saturation, just laziness. If I go on the left, I can decrease my saturation. If you decrease at the maximum, you will saturate your image. We have your image just in black and white. So here I can saturate my image. Just laziness. And yes, that's it. If I just take my last example, Cgs is pictures. Some principle. You can see a big difference between the sky and this part with the reverse. And so buildings, if I use contrast brightness saturation increase the contrast difference, laziness, or you can decrease a contrast. And so in this example, maybe is a decrease of contrast can be interesting even if it's not on the adjustment, but we can decrease the turn, so contrast. So then you can walk with brightness and saturation to reinforce also Kahlo's translate these. So this is a basic adjustments, really basic adjustment contrast, brightness, saturation, simple, with just three different cursor. But something extremely useful. 23. Module color zones: Let's see. So model color zone. This is a very interesting models because you can work with likeness, saturation and new. Let's first start with saturation. You can see here you have a color panels and you have the different colors that you can find on your pictures. And let's take an example. You have the bridge with a red colour here. I can find the red color orange spot. It means that you can drag and move this cursor here. And each time you stay left click, you can add a print. And if you move here, as you can see, I'm going to have a better read cooler, more in this area. But one of the things that you need to understand is that if you want to have something more specific, you it to AdMob print. It means that I can go left-click on the left at a nodal point here. Left-click on the right. I don't know Doc went here. And if I just drag this sprint on red zone, you can see I have better saturation, better color on the bridge. If I do the opposite process on this direction, i'm going to desaturate the color of the bridge. So this is how you can work with the saturation. Some principle, others are forest here with a green color. I know is it's more in this area so I can drag and move and increase the saturation of also green pound of my picture, all this area. So things that you need to understand, I'm going to resist the parameter is you can choose here. You can choose just a color from this part wizard. So each time that you click on this, like use this color picker, you can select to Pat. If I sit exist buttons, a bridge, I can see with the lines that it concerns this part of my co-op panels. And it means that I can just go left-click and use these just like that, as you can see, for example, and it can, I don't know the operands here, no doubt prints here. And I can increase really is a saturation on the, on the preach because I know that I'm on the right colors. At the same time. If you click here, you can select a full area. So it means you can just go left click and select an area like this. And thanks to that, I know that the area is concerned between this part and this part. If for example, I select this area, she's not going to be good because bats first exists, REI knows that middle twenties here and it concerned between here and here. And if I drag it and move, you can see that. So you can have, the first of view IS a second print and you can drag and moves across sines omega. If I just do the same process. But silicon area here, just like this. You can see I have small print in the miter, just Eisenbud share. It's not going to be really good. In this example, you can do the same process with likeness and you acidic lightness. Same principle. I can take a glance with a bridge, just laces with my color picker. It's this area. If I position a point here. I know the print here and another point here. And I drag and move this part. As you can see, I can add lightness on the bridge. I can I can add light on the bridge are akin Duncan's a breach dressed like this. Same principle for the forest. I can I know eats around it's around this area so I can track here are basis. And you can do the same principle for x2, y2, z2. It's to change the color. I use my color picker selector against a bridge. I knows it says this area. And if I drag and move, I can change the color of the bridge lazy, so I can have my bridge more blue, green, and I can change more purple, more blue. It's something nice to do. And as you can see, I can make my bridge just lays this prize on Barack. And I don't know there are points here and adopt prints here. And now my bridge is in proper. It's nice also. Now let's take another concrete example, Scissor type of scenes that you can do with Colossians. I'm just going to select anodal pictures on his part. And if I select this pictures, you have different colors. I can use Colossians. You want to increase the saturation of audio pictures. You can also just drag and move. So different. But you can just drag, differ on print laziness. And thanks to that you will have bit saturation. Are, are your pictures just lazy so you can see the difference. And just going to resit parameter show you with a snapshot. Take a snapshot first. And if I just drag a print here, try to print here. You can see I have betrothed saturation or my pictures. It sees a difference, just like that. But now I can select specific zone. You can do the same for lightness, can add lightness on all your pictures. Just laces. Now, double-click to revisit. Double-click tour, is it if I want to increase beta saturation of the ocean? I can select my copy. Take this part. I can also select my color picker, but with aria and silicon area here. And I know it concerned zis. So it means I am my middle point. I can increase and reinforce the saturation of this area. Just places. At the same time, if I walk with you, I want to change the color of this area. Same principle. I can select my area lysis, it concerns this and I can change. It tells a color of osha and make some seeing more green, for example. You can see the difference one more time. I want to change the terms, a red color on. So how is this? I can use saturation. I can use my color picker rich period. So red color here, it concerns this part and some principle I can drag and move here and apply a new dot print, just ICs and increase the color of how is this. If I take a Glen x1, x2, I can do the same process and I can change the terms of color. Also observe how busy. So I take a cure sir here and I can drag and move and change to r For example, my Aziz in proper. So you can see the difference. It's nice and some principle for lightness. So as you can see, you can make many, many different change. It's very interesting and when to show you my last example. This CCS is pictures. And you can also this saturate your image. So it means if you gone saturation, just drag the cursor to tally at the opposite, you desaturate your image. So you will have everything in black and whites just like this. If I just come back, I want to change the color of my of my lake, increases saturation Cdg to an area just like this first. Now I have my first print, my print to move n my autoprint to closer area. And if I just check this out, I can increase the saturation or decreases saturation, just laziness. I think in this example I can change the tailored so the sprint and this print again here. So change is color. I go anew, same principles, sitting area. And you can just walk changing towards a cooler like this of the leg if you just walk with you. And some principle we saturation, sitting zoom area and you can drag and improve, changed the chains are lightness. So as you can see, it's something extremely, extremely useful to do. 24. Module color balance: Let's see the color balance. I selected these pictures. And with Commodore color balance, you can walk with saturation and after I can walk with different color, but on shadows, mid tones, and at lights. If I go and my color balance on the right, you can walk first with put an input, output saturation, saturation correction, but after the color balance and before also color balance. So it means that after you can make some adjustment and you can change the situation before or after. I can start with the input saturation, you can increase the colour. Or in this example, we are not going to cease to merge because I don't have too much Carlos on these pictures. If I just continue, you can see shadows, lift of set mittens, gamma power at lights again slope. I can take a gland, so bats are shadows here. And you can apply some, you and saturation. If you just apply saturation, you can apply some colors that you see linked on you. For example, I can apply some more proper color here and after saturation, but it's going to concern the shadows, just daisies. And just some time you can walk with a factor so it means to drag and make some adjustments. I'm seeing knitr document. If you move the factor, I can move the factor and I can obtain face-on pulses type of reserved address lazy so we can see the difference, but I work with some shadows in this example, you can do the same thing with mittens. And here you can select a you. And after saturation, frozen meat on midtone is going to be deterred here and knitter on SEO Shen also. And you can apply some midtone walk with the factor one more times. And at the end you can walk also. So you factor, you saturation here. But for at lights, let's take a Glenda, but just sky increases saturation. And that can change color onto the sky. Just with that. At the same time, I can increase my effect. Just daisies depending of the factor. So this is diverse things that you can do. If you, you have also shear factor of gains. So it means you can see leak like an area lysis and he's going to make some adjustment for the US. This is the same. You can sit next to you and you can see just an area. And he's going to find the things that you want to have depending on what you can choose. When you just come back after you can work with output situation. So it means after Zan, input saturations, you walk in S, L, you can walk or so on. And she BL, it's going to be a little different because now we have different channels, light red, green, blue. If I walk on the shadows, as you can see, you can walk with red, green, or blue lysis so you can make some adjustment, but in a different way. You have also bus where you will have saturation, you red, green, and blue, and also sings If you want to stay or something more simple, just keep HSL. Since those type of things that you can do with color balance, I'm just going to show you another example, takes his pictures. Color balance. You can always add collaborators to work with the saturation. I can seek input saturation and beta occur on this picture just with unphased situation. You can also work with a contrast, increasing contrast also with z's color balance. After you can walk one more time with a shadow. So as I told you, take a glance about mossy forest here and the trees. If I move my u and increases saturation, I'm going to change the turns us type of cola and fries on park and make something more in Green? Yes, more in green, just like this. And I can change a factor, as you can see, factor here for all these spot. If I walk with a mittens, same principle, I can walk like this. And after saturation, I'm going to have an impact on the ocean. Again, sittings, I'm seeing more in Blue. Moves a factor, movie turns a factor increases saturation, just disease. And you can walk also with the satellites civic to you for at lights take against about to sky. And you can walk also lysis. So this is the type of things that you will be able to do with z's color balance. 25. Module basic adjustment: We are going to see some other basic, just meant. So basic adjustment in our favorite models. I say T These pictures I go in basic adjustment here. And visitors of parameters first. You can work with different adjustment and yet something great because with just one models, you can walk on basic things like exposure can warp is contrast, can walk with saturation also at the same times, you can also change the black level corrections. So in just one modality, you have many, many different interesting scenes. Black lever correction. You can just move here and as you can see, you can increase, increase your shadows and he NGOs or direction you can decrease disease. So it is another way you can move more about your shadows, just laziness if you change the black lever correction after he can walk with the exposure. So increase the exposure or decreasing exposure here, just simple, you increase the exposure, you decrease. So exposure. You ever saw something like compression. So it means you can increase the compression after make little adjustment on the ATL lights, a ticker glands on the sky, I increase again be mostly exposure. And now if I move at like compression on the right, I have a small adjustment, just isis. As you can see. If I decrease my exposure here, I just liter and move with ADD like compression. You can see little difference on the sky. So this is the type of things that you can do. Also, you can increase the contrast difference between the shadows ends at light. So as we show in ozone models, to increase the contrast. So the difference here, the shadows at lights are on the sky and shadows more on Joseph paths with Mittens. This is the reason for which if I do something nice, you can see the different between the sky and the azar plots. And you can do the opposite process with decrease the difference between the sky and pass dress sizes. After you have a system which preserve Colin's colors. Here, we don't use this too much, can just make some adjustment with middle gray. And you can walk or so with brightness saturation, vibrance, then they sink. So chancellor brightness, two slices. It's something by Isaac. You can same time directly increase saturation. So I have beta colossal or your pictures. And San Francisco will walk with vibrance, just laces. So yes, it's interesting because in just one peak trails you can phrase on PR, I can increase the contrast. Just lysis make little bit more exposure. I just sometimes here can walk with the TRB brightness. I can increase the saturation, increase vibrance. And are these interests when pictures and I can also increase the term y naught or decrease black lever correction. You can also work with automatic, automatic adjustment. If I just revisit parameter click Auto, You can see x2 adjustment. Here we have almost nothing. Expect little bit more exposure. Ittle bit more contrast, a little bit more brightness, but not too many change. So this is about basic adjustment. Just let's take another example. We are going to sit in this picture. And basic adjustment in this picture or something interesting to do, can be to increasingly turned to contrast. One more time you can click on auto here. But you don't have many, many different, just a little about exposure literate but contrast essentially. So I can make some adjustments. I would like to increase the black cleaver. Correction is beta. I can increase the contrast or sold it or contrast. Finally, exposure, it's not really good. I can decrease the tells the exposure and after it's recreate too, in this picture increases saturation to have beta colors on a different path. And you can increase Vibrance and Saturation and virulence. And yes, thanks to that, we have a better picture. So this is a type of things that you can do with basic adjustment. At the same time we have contrast brightness saturation. When you will be able to walk on contrast brightness saturation. You will find this again on basic adjustment. But I think it was interesting to use also by xik address meant because you can walk or so with exposure at like compression can be searched. So something literal interesting. And you can do also sing in just one modality. 26. Module base curve: Let's see. So model base care of base curve here. When you apply this model to things that you can do, It's to walk with this curve. You have just a basic care of. And things that you need to understand is totally on this kroner left corners. You have black print. Totality on this corner you observe why sprint. So it means in one size of pixels with most black colors. And here's a picture with most wise color. If you want to walk with a contrast which is differential state takes his friends are black print and you can drag and move on to the right to tally on this part. As you can see, I can change my black points so it means I'm going to move my is2 grandma on the left and also spot are going to become shadows marked in black dressed basis. At the same time it can do the opposite process. So it means you have the y sprint and you can add more. Your histogram is going to move on the right. To move on the right. And you can have more light here. So it means on the spot, I changed my black 0.12 more at lights like this. You can run Frosso contrast just if you move your wife's point here, and if you move your black point here, just like this, at the opposite, you can decrease with contrast if you move your black print on this direction and you move your y's point on this direction. Well, it's interesting because you can double-click to residual parameters. You can walk with a more local adjustment. It's not like just only a cursor with contrast. It's some things that you can go left click and you can just apply a point here, can change your exposure. More exposure realizes less exposure, laziness. But if you add more points, 1 here, left-click stay, left click here, left-click stay, left cake. You can also walk with contrast just if you move this literal in this direction and moves this little on this direction, and if you do the opposite process, you can just decrease. So contrast those things that you need to understand, you can add more print. So it means I can underpin SharePoint, SharePoint here. I can also add prints here. I cannot put here, I cannot point here. I cannot apparent here. And what does it mean? It means that you can, in here on this part, you will have some shadows in the middles and mittens. And on the right, you will absolute applied exactly like on your Instagram. And I cannot sustain my histogram. You can take against lysis. And it means that I can make more local corrections. Yeah, I can move the black print but only on this part, so only on few part. So most with in black. So she's a reason for which phi moved justice Sprint. You can do this tumor genesis parental teases pad. You can see little difference on black print. Just laces. It means that if I move here, I'm just going to walk litter on the sky, but not on, not on z ocean. Because ocean is located between the midtone and at lights for this reason, I'm not going to move anything. If I move here semi-transparent when to work only with the sky because I'm in applied but at lights with more. Why sprint? Wisely Vern, just laziness. So it in C, I can increase the contrast. But first, our knee on the sky. And if I drag this print, I'm going to walk between mittens and applied. And it can concern is the ocean. And it means if I just drag and move, you can see I can change the ocean, just laziness. So you can make return, you can make Homo adjustment, different adjustment like this. You can drag and move here. And if I just tried lazy, semi-transparent when to concern something different, again, lysis. And we try something different if I want to credit difference between Skype, between x4 Shen, between Xerox, I position from springiness and the miter or signal and print here. And the second here, I'm going to decrease the sprint on this direction, for example. And when to Hadoop print here. And I can drag and move and you can see 3D, so contrast. And if I positioned and prints here, I can walk on the ocean. And she it's nice because we can walk with the sky, with osha and always Iraq's here. I'm going to make sense to merge just to show you the difference, but it's Anniston, it's indistinct. So this is a type of things that you can do in this example. You can, yes, why not increase details a contrast. So just like this. And here you can walk the thermo is sky for his own PR, and it'll be tomorrow, wheezy osha. And you can make adjustment, more specific adjustment. Just lazy. So this is a thing that you need to understand. 27. Module shadows and highlights: Let's see. So model shadows and lights and shadows and applied. It's interesting you can walk directly on shadows and in Osaka directly at lights. So first cursor concerns shadows. You can see all the rock sprouts for shadows here and the sky and see Oceana for at lights. If I just move my shadows here, I can just increase through shadows on the spot with more Ozzie Spata Green, 12 more shadows again. And at the opposite double-click to revisit. If I use at lights here, you need to come back to by default you will be with a value of plus 15 minus 15, but you can come back around 0 like this. And applied same principle. I can add, change. My slides falls a sky in Zao Sheng, if I drag and move at lights like this, you can also reinforcer contrast. You can move shadows on the direction at lights on this direction and you will create more contrast. Something interesting is indifferent picture generally we can increase the shadows and sometime we can also decrease little x2 at lights are increasingly towards you at lights, but generally we use more to increase shadow, but it depends on the pictures. You have all sorts of why sprint adjustment, which is green, double-click and double-click. Why sprint adjustment, you can change your West Point. So mall on the spot. Homo on this part. If you move your y's point, you will take a glance to the histogram as a curve is going to move because you change the location of the wise point. Just lazy is after you have other parameters that you can apply, it just decrease Little Shadows disease so that you can apply like for examples, the reduce sweet means increase your spatial adjustment just like that, but you won't have many, many chains you have also compress. You can also work with shadows, color adjustment, and apply scholar adjustment. But really we don't use these too much. We walk really with shadows at lights. And why sprint adjustment? Let's show different order example. When to move, move, move on these pictures. And this is the same principle if I apply shadows and satellites, can drag and move my shadows. On this page, you can see I'm going to have all the spam data. So and principally for use at lights, I can change, take a Glenda budget scanning. In these pictures, I can walk with my shadows and increasingly tells the shadows to see. Is this part. So not too much, but I can increase the tells the shadows for example, after I can make some adjustment, also wish at lights. And you can walk with a wise point adjustment. Just laziness. I can also show you another example with these pictures. And this is the same principle. We can first visit the parameters yesterday's laziness, and let's work with shadows one more time can seize with different drugs. Appoint here in drugs or print here. You can see at the same time we have to tell you some shadows and were out to tell you. So at lights, if you apply minus1 and greed and Preuss went untreated. Now, if I want to make some adjustments here, I can, for example, increase liters of shadows, just like this. And at lights, I can decrease the turn to add plants. And I can have this type of research. I can drag and move returned my West print to make some adjustment. It otherwise, print on the right just of ten meter radius. Radius can be interesting in this example because you can take against her, but this part, you can decrease the radius or increase or reduce. And in this example, it's interesting to decrease liters a readiness to have some sin beta, just laziness not to merge, but yes, you can decrease the radius. And I have so much more visibility on the left path using shadows and lights in this picture. 28. Module white balance: Let's see. So model wise bananas, I selected this picture wise balance. With this, you can change the tenth temperature. To change a tent. You, whether you can go with more, something like green, just lazy IS whether it can go with most I'm seeing like pepper, just laziness and sees a reason for which is, for example, double-click I received, I move my cursor. On the right. You can see the green cursor is not going to change, is going to stay with the same value. Why is the red and the blue will change to this type of column. And each time I'm just going to resist the parameters. When you walk with a tent. Just like this, as you can see, this crosswalk and move. But you can also directly residual parameter and work with red, green, and blue temperature. It's to add more colors of to add more cold colors. If I go answer right, I'm going to add odd is Colossus arisen for which I am going to have this render with more yellow color because I apply odd collapse stress lysis. And if I move my temperature, you can see detail. Since cursor change. If I decrease, I am going to have more cold colors. So it means something more like blue colors. She's a reason for which you can see just below I have some blue cursor moving at the same time. And yeah, that's it. So it means you can also work directly with the red, green, blue. I can work with, for example, increase the red. And I can decrease a blue. And it would be like to increase the temperature, as you can see, is this cursor is going to increase transparencies. So that's it. Sometime in different pictures. That not enough, there's not enough temperature in some pictures sometime you can increase that. And it's interesting. If I just take an example, let see the exits pictures. We can just walk with so wise balance thruster receipt parameters. And if I walk with temperature, I can increase the temperature on this pictures, just laziness or I can decrease the temperature. Generally xi in this example, I can increase justly towards the temperature. It's nice. Can walk the term Mao is red and decrease the terms a blue, just laziness. And yes, these type of things that you can do, you can walk or so is a tent. Alright, you're prisoner can walk here. Except it's also interesting if you want to make some scene with many coulombs, little different and audio pictures. You can walk on tenth and temperature. 29. Module exposure: Let's see. So modern exposure, you can find this model in our favorite model. And when I click on exposure here. So first cursor is simple, you just need to make correction, but exposure, so you increase the exposure arises as you can see, or you will decrease the exposures. So Nums no sink, exceptional here, increase, decreasing exposure. And testing sings is that after we can change to keeping our percentage of bright value, keep out toggle, it means that I can increase, for example. So exposure here and I can apply some clip art are, can decrease also and let supply just little, but you're not going to have too much impact because you need to select just laziness percentage of great value clip out. So it means you can take this and you can see like for example, a point like this. And you will have automatically, automatically a correction with also the black levels color. So you can change, for example, some synchronizes or some similar disease or something disease. And automatically you will have your correction just isis. So this is a type of things that you can do. If I apply this, I would have this correction, this or this. So depending he will take just lysis. So bright value. And this is the reason for which you will have difference. And so black level correct corrections will change. Now if I just received my parameter, just laziness. And you can walk with a black level correction. Here, are here. So a1 to be like increasingly turn. So Shadows translates that. But in the case where you increase the exposure analyses, you walk with a black level correction. As you can see, you can change. So black e verses a reason for which I change my shadows here and I increase, increase, increase, just Isis. She's also sometimes to make more exposure and after to walk littered with more contrast or so. And you can also decrease your exposure and walk after we supply cleavable correction. And yes, that's it after. Let's take another example. Here, I need to increase the exposure. So I can just go my models exposure and I can increase that. You can usually tell keeping three yards, just laziness. But you're not going to have too many impact. And you can walk after is a black level correction. If I use this as you can see, my also part with shadows, you can decrease the tells that RG opposite you can reinforce lysis shadows because you change your black fever correction, just disease. And yes, he's the reason for which you can increase exposure and you can increase Black lever curation. You will have like this, like more contrast. But if you, if, if i is the opposite in this picture, I increase exposure and decrease black level correction. You can see we can see better or this part, it can decrease the turn. And yes, that's it. 30. Histogram: We are going to see a histogram. You can find the histogram and the right corners. The histogram gives you interesting information about your pictures, about the different exposures that you have. On the pictures, you can find shadows and you can find at lights totally on the left. Two Italians are left on the histogram. You will have just the black point. So it means pixels. So pixels, the more black in your pictures, totally on the right, you will have the why's point. So pixels most wise on your pictures. And so on the left you have the black print After you have also shadows. Also shadows. In the middle you will have some mittens. On the right, you will absolutely satellites and totally on the right, the y sprint, you have different, you have different curves. So it means when you go here you can change set mode to linear. And you can change like this. So you have logarithmic care off and you have also a linear curve. This care of sometime can be better to seize a difference about exposure. And in this example where ouzo at lights, so I plights, eats about the sky and it's above the ocean. And also part with Iraq's concern. Concerts, shadows. For this reason, I have, as you can see, a curve with a peak here, just like that. And the shadows. And totally on the right, I have a peaking at lights because of the sky. And if I give you another concrete example, another great example, I'm going to six pictures. In this pictures I have at lights on mountains, the sky, and the rest is more shadows. This is a reason for which I have peak in the black point like this. And I have also a little peek at lights here, but not too much, but I have a big peak in the into black print. You can also work directly here. So it means you can go left click and you can drag and Cretan offset with your black print. And I can move all my curve on the right, just like this. And I can change my exposure if I just move this. I can also go here and drag and move also in this direction. At this livers. Honestly, honestly, you can walk directly with the exposure parameter because now we have exposure in the active modules and as you can see, we change the exposure just lysis. So this is a reason for which I'm just going to double-click to resist parameters. And here recede, here, visit. So when you walk directly on your histogram, it is like to work with exposure mother. And here you can change us. So Exposure arises. You can change your source of black level print correction. And you can take a glance on your histograms at scenes are going to move because you work with the exposure. And you can also have a curve with, you can have a curve with the red channels. You can have a care with a green channels. You can have a curve also with a blue channels. Sometimes it can be useful because going to resit parameter and come back to yes, are seasonal. So red, green, blue, blue lysis. And you can find all the channels or you can just silicons. So and whether it exists where there was this. If I just, let's show you another example. If I take this pictures, it's something and terrorists, maybe I can show you another example. Here. As you can see, we have big why sprint and at lights on the sky, this is a reason for which totally on the right, we have a peak here. So why sprint? If I just take this example, we have Mall cure of disease because many, many colors, just little peak in the y's color dressed like this. So this is a type of seeing what you can do if you have more colors, Marcos, you will have more blue, green, red Chanel. So yellow channels. Every seeing all these type of color, you will have Moses on your curve when you have pictures with different colors. That's it. So this is how you can use the histograms. And as I told you, you can come back with this view. 31. Geotagging: Let's see, geotagging whizzes. You can enter a time offset. So, so m is to select pictures and you can just enter a time offset laces. You have also the possibility to apply a GPX track file that you can find. And here you will. So a right time offset that Francis, I'm just going to show you fast. It's not. I'm just going to seek some sink like Japan here. And I have different pictures as you can see. And if I want to apply some time offset, I can just pick here and select our i've talked to relate all these pictures. I can just enter a time of seat so I can go here. And as you can see, you can change the different value in number of hours exist. So you can change that and if I want, yes. So you can just change the time of set hours, minutes, seconds. So if I want to change with an offset of eight, for example, I can just step plus 0 a, you cannot show US minuss 0.8. I don't know if is 0 AT depends on the location, where you are. And after you can just apply, you just go and write applied time of C2, selected image, added time offset to ten images. So it means that I can just click on these pictures. I will each time 0 print, produce eight. So that's it. This is just another type of things that you can do. This is just above scenes that you can do. If I just click on pictures about Japan here. Yes, I will have my time of set of proofs, eight. 32. Edit parameters: Let's see different parameters that we can apply directly here. You have first quick access to precede of your favorite. It means that you can have different favorite models. And from this favorite models you can have different precedes. You just click here. And for example, with exposure, I can find this precedes with base current. I can find this precede with color balance. I can find this precedes Colossians of sharpen, but it depends just about what type of module you have on the right. So if you change the model of, if you don't have any models in your favorite, you won't have anything here. It means if I go and exposure, I can apply some single disease and I will have this change. If I go on base curve, you have different profile, like this profile and you can take your glands are but what the pictures will be with different profile, just lasers, for example. Each times that you apply something like a pre-seed, you go on the right and you can see I have no base curve. I am exposure in wise lazy, so it means that I apply models. If I go ashore only active modules I have base care of with adjustment and I have orientation. Orientation is not important here, but I have also exposure with some adjustment. Why? Because I selected some sink here. Now I can just remove lysis and I can come back as you can see. So each time you select something here, I can apply color balance similar to Kodak, like this. And I can see color balance like that. And now if I just go on the right, I have my column balance models with different adjustment can just come back here after you can just do the same type of work. And here you can work with the style. I don't have any style. Lysis iss i show you if I come back to the late table mode, you can create different style on the spot. Let's come back into doctrine mode. I can sit exist pictures, just go in my favorite models. And increased justice saturation just laces. And I can create a new style from this adjustment. I come back in the late table mode. And here I can select this and create a new style. I can select all and save. Just lazy is I'm just going to apply saturation. And just click on save. And now I have this new starts saturation. Again, select another pictures for examples, these pictures, and I can go in my models and I can increase the exposure, translates these After I can come back in the late Table Style, create new Stein. And she, I can type some sink like more exposure. And I can just click on save and create a new stack. I can also crazy to take these pictures. And I can use sharpens, increase the radius, make a Mont laziness. And if I just come back to light Table Creator new style, that I can take everything and just apply more details. And I can just click on safe. Now I created new state. What does it mean? It means that I seek these pictures. I'm going my deck from_id. Just like that. I can just visit the different parameter first, I can go here, resides the parameters. You just click lazy slices. And if I want, I can apply a stein. I go on this path and directly I have more details, more exposure and saturation. So I can select a picture directly in my Doctorow mode and introductory mode, you can also apply directly style. I would like to have more saturation. I click on My starts saturation. I can apply or Sono Das died on this, on these pictures with more details like this. And then just pictures. I have saturation style and I have detailed steps. I can take these pictures. And here I can change for whizzes, die more exposure. Just lazy. So this is the type of things that you can do each time you can select an element, you can select the style. And you can see inside what you have here, I have chopper and orientation display encoding, output color profile, input color profile. You will have every time an input color profile would put color profile, display orientation, and after you can add what you want, just lazy. So this is a type of things that you can do. Most things that you have, you have display a signal darkroom image window. Here. You just create an odor window, just lazy, and you can move after Justice. Something interesting's that you can use also is that when I select this pictures, you ever saw the possibility to see toga over under exposed indication, right click for options. If you just go right-click, you can change. So sweet. But if I just click here first, you can see where our sub-problem of exposure in red, it means that I have too much, too much at lights. It's not good. And in black, it means in blue. It means that I have a, it's too dark and you have to duck collars, too much shadows on this part. And you can change that. So it means you go right-click. You can have lower suite and you can increase that depending of what you want to do. If I increase that, I will see also part of my pictures with the shadows. And at the opposite, if I change the sweep across, we are lazy. I will have all my pictures with also at lights of my picture's just laziest depending of what you choose. If I apply something around 50, and here you apply something around 50, I'm going to have every sin covert because 50 plus 50 equals to 100%. And in red are, in these pictures I have every seeing all my at light in red and on my shadows in blue are my shadows in blue with repartition of 50-50. But you can change your eye partition, for example, can apply 60. And here I can apply frothy, just lazy. You can also change red and blue for proper and green. You can check for black and wise. It's also interesting, I'm going to come back red and blue. And if I select another picture, you will summarize your pictures. And same principle. If I remove that, you can see the shadows on the rocks and the applied on the sky and the ocean. And for this reason, if you just apply these with the same value, right-click 60-40, our fuel supply, 50-50. You will have everything coeval with in one side your shadows. So with the blue path in the satellite resurrect part, after up to you, you can change the value lies is just to have some, if something is wrong, generally we can keep some single runs 3% or you can increase and you can see the turn, but since here or I can do the same thing on the sky. So yet can be something interesting to use. So that's it sees what type of information, great information that you can find here. 33. Presets: Let's see. So presets. Each times that you apply, your model's totally on the right. You have the possibility to create a new preset. What is preset? I select my mother, contrast brightness, saturation. You can change. So different value and crowd to preset from xhat. For example, I can increase. So contrast. And I decide to go until zs for example. And after I can cry to presets with this default value, I can increase the terms of brightness also. If I just go here, you can install new presets. You have no is this window, you can change the name of your preset and I can make contrast. Contrast or yes, I can make contrast or important contrast. For example, I can take, yes, important contrast. Just laces. After you can just click on OK. And I created these presets. I can do the same thing or something different akin, just go on. My I can go and my colossal lysis and in my closet and I am going to move this cursor moves, this cursor moves this cure certain interests, laziness. And I'm just going to increase the saturation, but she is not going to be really good. I'm going to show you is an older pictures. So let's remove that. I sit exist pictures and go in Colossians. And let's increase the saturation. I go and saturation panels sheds lightness. And saturation painter increase. Just isis. After I can create two new presets. I can go here. And Stone New Preset. And I can create some sink like saturation. And I can make your average saturation or something like this is, I think average saturation can be great. You can see at the same time in this, directly, in these models, we can have different preset by default. Now if I just click here, I have average situation. What does it means? Situation? What does it mean? It means that now I can see leaked any pictures or Taiwan, for example, these pictures, I can apply a preset. I want to go on contrast brightness, saturation. I can go and say Right. And if I want to have my important contrast preset, I click here and I'm going to have the same value. It's a proton because sometime on pictures, eaves are liters. Sam Awesome symbolizes, you can apply the same, same adjustment or directly with these presets. Same principle. I can say this is picture, I want to remain frozen corrals with the same type of parameters. And so pictures before I can just go on color balance. Not on GarageBand and some Colossians. And directly I can apply my preset. And my preset is average saturation, just laziness, and that's it. I've told you can also edit your elements. So it means if after I drag and move saturation, dragging move increase saturation, I can come back here. You can select update, present, average situation up-to-date precedes average situation saturation. And if I just click here, I can click on update. Yes. And now my preset will be whizzes different value. And yes, that's it. You can walk like this. And if I come back, contrast brightness saturation. And here you can see when you use a precedes, you can edit this precede. Tdd is preceded by ego and idiot who can change the name. If you just go on delete, you can delete to precede. I'm going to delete this precede here. Now, if I just go on these pictures, Carla zone and I go in this part, you can also edit these preceded resists precede. And I'm going to delete again. Depending of the pictures that you used. I'm just going to recede says parameters. Depending of the models that you use, you can have preset by default, if I click on Colossians, as I told you, you just click here and you are, for example, black and white and skin tone. And thanks to that, you are directly precedes. You can apply something like natural skin tons, just isis. You ever saw precede like red-black wise, like this incentive testing because in this example, you desaturate or your image and you just keep few saturation on the red colors. And it depends about the sing if you go and contrast brightness saturation, you don't have any preset. Who go on basic adjustment. You don't have any preset basic cure. You can find few presets, for example, laziness basis, depending of what you choose. If you go on xu Wei's balance, you don't have any preset. So really depends about the mothers. Here. You can change if I go, for example, on the colon group. You have also color Corrections. And one more time you can have more one turn. Crystallizes can change for warming filters, dress sizes. If you apply some sink like like your color, light vibrance for example, here you don't have new preset, so really depends about what you can choose. If you select something like As removal, you don't have new precedes. It, you just click here split tuning. For example, you have split to10 interesting vignetting, interesting, and on VAT. And you can apply directly. You have Z's, just like that. In split tuning, you can have a, for example, z's. So I'm not going to show you everything. And these are many, many Mod model, so it's difficult to know all the models which have precedes. But I can invite you to take a glance. And depending of the models, you just need to know that you can have presets, frost by default and Sagan's, you can craft your unprecedented. 34. Snapshots: We are going to CSU snapshot. So m of the snapshot here, each to a different, different step of your process to edit pictures. You can take a snapshot. It's useful because you can see so different steps. You can also have a view before, after our different adjustment. If first you want to have a view before, after, at the beginning, with the beginning of your pictures, you can just take a snapshot, just lysis. Now you have just a snapshot at this lever. And after you can make some adjustment, for example, I go on my favorite models and I'm going to increase contrast, laziness and may be increased litter brightness and saturation. And I'm going to make managers to see the difference to stasis and it'll be tomorrow, saturation. Now you have this render. If I want, I can take first, I can see before, after just clicking on this snapshot orientation, this is the beginning of my pictures, NDCs after. So it's interesting after you can just drag and move on this direction, just lazy skin, drag and move. You have a small icon here, like what you can create a rotation also. So you can create a rotation on this direction, justices. And thanks to that, you can see before, after, but in this direction so you can walk horizontally and you can walk right. Now, I can continue. I'm going to click here to remove this part. I can make control brightness saturation tech knows rational snapshot, and I can continue and go on my wise balance. I can increase the temperature, just laces. And after I can also take a snap shop like that. And I can continue my work. And I can go into colossal, can reinforce, for example, the green colour of vegetations. So I go and saturation. I can select on my picture on the spot. And I can increase my disease. Mechano dot print, mechano dot print here. And I can do something like that. And yes, if I want, I can take another snapshot. Again. Just take snapshots. So as you can see each time you can apply different snapshot. And I can continue e phi decide to make sharpen to add more details on my pictures. I can do this and why not to take an aldosterone trope, sets it. And you can create as many as snapshots as you want. Can work on shadows, sunlight. While quiz, jazz a shadow here and decrease at lights, for example, yes, in credit towards a Shadows. And take another snapshot each time you can see the difference. So it means. I can come back here to my y's by lens. I can come back here to my Carla zone. I can come back here to my sharpen, to my shadows and lights and you can see the difference with the last part. If you select nothing, you have your pictures. If I sample asleep colossal, i'm going to absolute difference with the step Colossians. And I can see the difference here, can also turn and you can drag and move. So different stress disease, if I go and shop and I, which is a difference with sharpen dressed like this. It's just something interesting that you need to know. You can reset the parameters, a snapshot peak here. Honestly, honestly, I think in my, in my opinion, and I'm just going to recede to remove or these parameters. In my, just, in my opinion, it's just useful. It's essentially useful to take a view before, after. Let's take an example. I see XIST pictures. First I go here, I take a snack shop at the beginning. And after I made my different adjustments. So it means I'm going to increasingly turns a contrast and make more saturation here. I'm going to use my base curve and some brands production different print. And I can walk again itr bit mommy's my contrast differently. Can go and wise balance increased determines the temperature of my pictures. I'm going to go and sharpen, increase details, a reverse of the tense. Just disease and go in. So Colossians, I would like to have bid to our green color or your color I can select to print phrase on per, sprint and drag and move. They turn to saturation. Here, I mean, I'm on lightness and when to change for saturation. I can associate just to Naropa dressed like this. And as you can see, after I can drag and move under saturation. With aria, I can select again for examples, this yellow area crystallizes in San Francisco where I can increase. It's more on the red. So you can make this adjustments that you want. Now as you can see, if I go on my active models, I have all this active models. And if I want to see so difference for my pictures before, after, I can just click on snapshot wise balance and I have my render. So ZC is before, this is after I can drag and move to Caesar difference. And if you click here, you can drag and move. Also. You just need to be careful about here. As you can see, the pictures is so much better but different things. If you just zoom on your document, click Control and lysis. You. If you just zoom on your document, you won't have the right effect. It's not going to zoom and Z2 part at the same time. So just some things that you need to know. You can also walk in real time. So it means you can keep this Phew and I can apply, or the Sings lie for example, the color groups. And I can go in color contrast, increase screen VS Magenta here. And as you can see, I can work with my adds value, but keeping my render just laziness. And here you can see the difference if I go in this part, can increase green face match and address lysate. And after I can drag and move again. 35. History panel: Let's see the history panel. You can find the history panel here. And thanks to that, you can find the different step that you apply. In this historic panels I have. By default, you will have each time or juvenile input current would put color, display, encoding orientation. And after I champs at you add mothers who will exist in your history panels and willing to go in my favorite models. Let's increase this picture's going to go contrast brightness in duration. Increased determines a contrast and increase the saturation. Brightness and saturation lysis. If I just go on the left, you can see that now I have a new step with contrast, brightness and saturation. I can continue. We're going to make an adjustment with basic adjustment. And here let's work with saturation. Again, it'll vibrance, and that's r. Now you have another step with basic adjustment in the history panel. If I continue with liver disease, I can just move returned my black print. It turned my wife sprint just like this. And I, you know, I have a new adjustment diverts. If I continue with Chapin increased details, the details lysis. And now I have something new we sharpen. And it means that it just an historic patterns. If you want to come back on relies steps. So it sure you can work directly with your Active models and you can remove some sin, but you can also directly come back on a step. I can come back on basic adjustment just like this. And if I come back here and now I make any adjustment, I will remove levels and sharpens. So I double-click on, click on basic adjustment. Now I come back to my models and I want to change something in Colossians. If I just click here, just like this, as you can see, I remove my two element after, to continue with Colossians After basic adjustment. So you come back forms a step set you choose. Just as is. For example, I see the contrast brightness saturation, and I come back to sharpen, for example, now I'm going to work from contrast brightness saturation with my new adjustment shopper. So you just AN history banner. You can use your history and it's nice. Or you have something like compressed is to restock compress history stack. It's what, it's just that when you make some different adjustments sometime you can have many, many different scenes. And if you have some repetition, repetition with unuseful sings, You can use compress is storage stack, ketamine or minimal history stack, which produces the same image. He finally here, it's not going to be really, really useful because I can compress anything. But when you have many, many step on pictures, 203040 steps or moral, sometimes it can be useful and you can like a clean something unuseful using compress, compress, a histories tied compress history stack, just like this. 36. Active modules: I'm going to explain the active modules. Here you can have show only active models. It does testing because when you apply different models, as you can see, even if you can position these in your favorite. We can have many, many models. And it's great to have a summary out what models used in your pictures. And Francis, You can see leak show and only active models. By default, you will have every time output column profile, input column profile, you can change up its normal Each time on each picture, you need to have input cooperate phi output column profile. By default, you will have also orientation here. It's not really, you can use this, but it's not really usefully just like to create a partition of your pictures. So I don't want to use this. I can just Decree. I can just click here. And now if I move and I come back, as you can see, I don't have orientation. Lets apply our favorite models and just going to make some adjustment, contrast brightness saturation. And let's increase the saturation deter brightness, MR. Contrast. Now, as you can see, I have on the left, this icon is in y's y, the red icon is in gray. Icon is in y. It means that some models is active. And it means that if you go on show only IT models, you will find this model here. Contrast, brightness, saturation. So it's times that you apply your model. You will have the icon in white, and you will have this also on active models. I can go and sharpens can increase. So details of my pictures with sharpen just slices. At the same time. Let's continue. Akin, go in. I can go in shadows and lights, which has drag and move some shadows. I can increase it as shadows, decrease liters at lights, just laziness. I can go on my bicycle adjustment and thicker glands. He turned black lever corrections, increase V saturation increase vibrance. And these pictures. And yes, that's it. Now if I just come back, you can see is different. You can see on my favorite models, everything is wise. It means that you have models active. I have 1234 active models. If I just go here, I can see that also all my active models are here. It's great because if you want to make some modification, you don't need to search every time where all your models you can directly go here and you can make modification. I can come back contrast and contrast for example. And that's it. If you want to just remove a moderates because for example, I don't want contrast brightness saturation anymore. You can just click here. You remove that, you remove the visibility. You remove SIS model as active. It means that if now I just move on, something laziness and I come back, I don't have my models, brightness, contrast and saturation. Because for, because I changed that same principle. If I remove that here, I click here, I click here, and I click here. I move, and I come back. As you can see now, I don't have any more any active mothers. 37. Color picker: We're going to see x2 color picker. Here we have color picker parameters. So m is just to recuperate different color. You have here a color picker icon. And when you click here, you can select with an area and you can change to select a print. If I just select to print like this, you can also walk with LGB and you can walk or so with lab, just laziness. And yes. So you can change. I'm going to show you is Aaron q0 b. And I select Print. And I can drag and select two-part like for example, some sink, like with different trees and I can apply some cross here. Yes, just laziness. And from this print, you can go at this Liver Life samples. You can see leaked, mean NCBI, click Add. And thanks to that, I have a new sample. And you can also create a new sample with just mean. And you will have something as a mean and you can also select Max. But here in this example I'm going to have the same thing. You can remove a print, just clicking here. Let's apply a new print. I can drag and move dragon move, dragon move and position. On SEO. Sharon laziness. I can click on app. And at the same time I can drag and move and say syllogism sink here. And I can click and so on. So as you can see, I added three different simple. You can also display sample around image. If I teach here, I can see my first sample, my second sample, and my search sample. And each time, if you create something, you can add a new simple. Now, you can also create something like this, but not from a print, but from an IRA. So you sit exists and we Zara, you just go left-click. And thanks to that, he is going to define a Naropa, is going to define a narrower, going to change for me. And he's going to define an era. And this is exactly the same principle. You can just click Add, but this time from a narrow, so he's going to take the average of the colors of the area. Just lazy. So you can see something here and you can click Add. He's going to define an area. Just going to remove the last sprint. Now why is this eats finally useful? Because we can have simple of colors, but why it's useful? I'm just going to go on the right and select certain groups. On few, few models, you can find a copy curves. Let's take, for example, with a Tone Curve, we thought some of you have the possibility to apply a penalizes and after you have your histogram and as you can see, you can change a different value with a ten curve. And if you just click here, you have peak. Color from image. Now I have what? I can pick a color from image and track and move. And as you can see, I'm going to have red line lysis, like one. I can select a sample from this karate care with the red line. And I have three other line, Sui ozone line hits are almost the same tau, but we have three lines here. And the fact is a C-Suite line correspond to my three live samples like this. So if I click here and silica, you have sweet lines, the green line corresponding to the centers. And those are things that I can't do it for example, to take a point like this. And if I just drag and move, as you can see, my different simple as going to move at the same time. It's logical because it's not going to be the same color each time you have three values and it's going to change. And you can, for example, drag and move, make some adjustment. But if you make some adjustment like this, He's going to move n. You can just go on the left and on each sample, you can click and keeps up, can click and click and click and look just like this. And thanks to that, if now I apply this, I drag and move. As you can see, my simple as are not going to move laziness. Why it's interesting because you can apply different print just like this. And I can apply your points here. For example, a point here, a point here. And I can drag and move more, only a part here. I'm going to apply some adjustment only on part with my green print. With My first simple, it means here. It means here. So it means if I just drag a trust technic lens to this green line, I can just drag it. And as you can see, I'm going to apply some change on me on the spot. And I can make some scene, for example, docker, just lazy. If I take another sample, for example, Shia cannot do no dark fringes beside an opera point just beside, I can drag and move and change some colors more on SEO Shen With my bloop, with my blue sample. And it'll also on the beach just lazy. It's because i on this type of simple, just like that. As you can see. And after I see the same principle, you can also select your sample, just laziness. And if I apply this not on the sky, but if I apply a small Yes on the sky but with a Y Sprint, you can see I my, I have my red line here and I can apply a nodal point here and make some adjustment, but more on the sky as you can see. So yes, with this tool, I can click here and drag and move changes sky also. So is this tool with a Tone Curve, you can make some assessment with a ton. And you can use the color picker and you can have other example using this tool. This is a result for which can be useful to use this color picker. It China can remove your samples, just kicking here. And you can also visit some parameter. 38. Duplicate manager: Let's see, duplicate manager. With deeply duplicate managerial, you can create different version, a different version of your image with different adjustment. It's literally like two, differ on style, on the same pictures. But you can do this with duplicate managers. By default, you will have your image and you have your first versions here. If you want to create to no derivation, you can just click on that, a new version, laziness. And now I have another picture slices. And on this picture I can make some adjustment and phrase on PR, I can increase my saturation. Here. I can go also on basic adjustment and also work with, again bit more saturation and vibrance. And in this version by default, you will have each time ends of frost version. And here I can type some c adjusts lever, I can tip basic. Here I can take for example, saturation. So I have a version with my basic pictures and a v are shown with just saturation. No, I'm going to create a model version. And for this, I'm going to click on proofs. If you click on plus, you are going to create a new version with the base of the image wizard, any development so I can create a new version. I come back with my basic image. Each time. As you can see on this part, we have a group wherever group CCS, while here group is your f2 is useful. Group are useful because you create different version and it's the same group. Now on this new versions disease, I can make some sink like contrast can increase the contrast. I want to see my pictures with many, many contrast. I can go and shadow at lights and some principle, I can reinforce the shadows and I can increase the outlets. And here in this version, I'm going to tap contrast. So things that you need to understand is that you can also create a new version from an older versions. Here I have contrast. I can after, if I want, just click on create a duplicate of the email we send history stack. If I just click here, I'm going to have a new duplicate image, but keeping the base of the contrast image. And here I can make some order adjustment, for example. So I can come back to my basic models. And I can just increase the relievers work again with the black print by spring just like this. And yes, I can do something like that. And in these versions, I can make contrast and hear more contrast like this. So as you can see, you can create different type of versions. And if I want, I could continue with concretization details. I can cry to a version with different colors. And that's it. Now, each, each pictures, texts, texts, the same groups are inside the same groups because it's a different version of the same pictures. So now it's the same group. If I just go at this, leavers know the things that you can do. You can see France versions, basic. You can see your reactions, saturations. You can see your rations contrast, or you can see your version more contrast. And you have all these fashions. If you come back in light table mode, you will have all your versions of your pictures. If I just come back on the light table mode and I take you cleanse on my landscape fine. Now, I don't have 20 pictures, but they have 23 pictures. Because I have my first picked my pictures with all xu different versions, my pictures and all so different versions. And Francis, it's useful. This is y, x2 groups are useful because now you can see why it's useful to, to other groups before it was communicated that to beginning to understand, to understand the gross. But here, yes, it's a logical. Now I can come back on that, true? I can click on these pictures, just come back on doctrine. And you can remove those different versions if you want. Each time that you click on the version, you can just, just take some modifications. So first when you go here, as you can see, now, you have here, do you, do you really want to sensitive TD image to trash? If I want, I can just remove that. Just need to drag liter and to have this view. And I can remove that. Yes. And I can remove that yes. For example, Each time you need to have at least one version of the picture says the reason for which you have each time your first pictures here. 39. Reset parameters: Let's see how to revisit parameters. I'm going to apply a model on these pictures, city contrast, brightness saturation. I can for example, increase contrast, can increase brightness and I can increase saturation. Each time. If you want to just revisit one parameters inside your models, you just need to double-click, double left-click. And I can recede, contrast, double-click. I can recede brightness, double-click. I can recede color, saturation. I can visit saturation. And some principle. Now if you want to revisit all the parameters of a models, also parameter at the same time, you can just click here and you have receipt parameters, just slices. It just something useful that you need to know some principle. I can go on my basic adjustment and I can increase the black level correction if I just want to changes, double-click and that's it. Now if I apply a different her modification contrast, brightness, just disease, increased saturation, increase vibrance. I increase also sings and I just want to resist the parameters with, I can open in TQ here resid parameter, but you can also directly go here, revisit parameter, and that's it. You can come back lysate. And it's useful when you apply our models. I'm going to come back to example of contrast brightness, saturation. Just like this. You create some modification. At the same time I gone sharpens just like this increase with details. If I just go on through an active models, now I have sharpen contrast, brightness saturation, basic assessment. If you just click here, you are going to resist the parameter, for example, contract brightness saturation. I can visit the parameters. The models is still active. Switch on if I just move, come back here. So mother is still active even if I don't have any change because I just revisit the parameter. If I want also to switch off, just click here and now, yes, that's right. I don't have my adjustment. So that's it. So just differ on just the difference when you go on this path with this icon, it just show active mothers if the model is active. And here you have revisit parameters. Revisit parameters. 40. Module color reconstruction: Let's see. So model color, how construction. You can see this model directly in buzzy groups models. So m of this model is to apply like little main colors, a main clause, but at lights of your pictures. And after you can make some adjustment on satellites and you can work with sweethearts, special extended range extent. Here, I have precedence, none. It means that you can work with a sweetheart and just make the turn adjustment on. So at lights, take a glance on the sky. If I move my sweetheart, like this, pixel width, lightness value above C suite, I corrected. So it means I can correct just moral exists if I drag it and move on the right. Just daisies. And you can change the tells the aspect of the sky. You can also work with a spatial extent. So how to replace a sucrose occurred just as is. And you can walk also with a range extent. But yes, I make some just little adjustment here. Something better, it just to change precedence because you have known, you can check for saturated cuddle, you will have deter some difference. One of the best things to do, it's to use you. And thanks to that, you can apply some main colors and I can make some Cindy turmoil in red. And after I can walk with my sweet old and take a glance about so adjustment on outlets. So under the sky the total so on the ocean I can walk with special extent after to increase, increase excrete effect. As you can see, if I have my special extent here, I have just few path with little red pixels. And if I increase my spatial extent take against here on the ocean and going to increase, increase, increase till today on almost every sync. And after you have alsos arrange extent. And you can see you can increase the feet. But really, really we walk on the atlas and we have a nice, nice render. Let's see another example. I'm going to see these pictures and some principle color reconstruction. I'm going to change precedence. If I don't change percentage, you can see the difference and just scallions here. Yes, really, we can take a glance PHP, just apply sweet old, you will take a part on only few pixels. And if you increase more on macaca, just lazy. So you can work with three arts. After you have some special extend suggest around the edges of the lights, you can increase the spatial extent to lysis more on Skype. And you have also the range extend. So really it's a nice example because you can see really is a different cursor. Now if I apply some change precedence for you. And so in principle, I can change it tells a color and why not to apply something like purple. And some principle can work with Sui all just laziness, spatial extent after, if I decrease pressure extent taken against a bunch of edges on the satellites is going to reduce, reduce, reduce till this part. And you have a so-so range extent. So in this example I need to increase as per share, I can increase the spatial extent and change your so-so range extent if I want to have something more uniform and after I can walk with you, if you want to apply more lighter blue color, Marley turn green color, yellow or red. Just like this. 41. Module crop and rotate: Let's see some other crop and rotate. You can find these models in basic droop models. When I teach here cropping, rotate, you have your picture of the first things that you can do it just to flip. So if you want, you can flip horizontal your pictures as you can see, test testing to know, reticle, just laziness. You can come back or so. You can come back also unknown, and you can also do bus just takes out. So it's interesting because here I can just make horizontal, horizontal flip if I want. After you can also work with angles so you can create a rotation on your picture actors desease. So just to rotation, it's also possible double-click tourism. Yaso, possibility to change perspect perspective you have just hear Keystone and Red scare horizontal, full. If you apply vertical, you are going to have two guides. One guys here, one gets here. And it means that you can make some correction to only tells his guide, you can turn it turns this guy. And after you can click OK, and as you can see, you can change your perspective like this. You can also do this work. I'm going to recede parameters with its own tasks is the same principle. You have one guide here and you can click and drag this guide just like this with his Sprint. You can take and drag also here if you want, also in this part. And after each time you can just click OK. Our double-click and you can change some perspective. Some seeing here you have automatic cropping. If I just come back keystone, none. You can also apply full and when you click on full, you have all your differ on guides, lysis yards you have, or your guy vertical and horizontal. And you can One more time also change. So perspective, just like this. And I'm just going to show you again. If I just go on. Yes, full translate xhat can, for example, drag determines its direction. After slices are here, it's not really good. But just to show you how it can be efficient and just going to come back on none. And yes also when you apply some sync with a keystone so can crack your change, can create some change just like that. And after you have correction applied, so it means that here you have your right correction. So it means that it's nice. And the things that you can do also is to just apply some cropping. What does it mean? It means that here you can keeps, yes, you have some guide. It means you can apply some grid, you can apply some muttering, So you have numerous possibility. And at the same time you can apply directly golden mean. So you can apply different SIR, extra X-Y-Z, different Guide and each time you will have different sings in St. Isaac instead to guide. If you click on margin, it's great because you can crop your pictures directly with margins. So it means I can drag and move here if I just want to, absolute temperature can drag my margins on the left. I can drag my mansion on the right. And I can do the same thing on the top if I want. But Xianzu top, I'm not going to move, but to move on the, on the bottom. And some principle double-click and you can crop your pictures with matching. So it's also something useful. So you can walk on Main and you can walk also with machines. 42. Module invert: Let's see. So muddle, invert. You can find this model inside the basic group models. When m of this model is to invert, so close so you can go and invert. And just if you seek to cool off thin material, you can click here and you can see leak some color. If, for example, I seek to wise color or fin material, as you can see, I'm going to invert the colossal means that all these part was more with black pixels in the shadows. And I chains xhat for this and all these parts of the sky and see your shadow was where more at lights, at lights and Francis reason, if I see leaked so wise column material, I'm going to invert the inverter with a halves this resurrect. Now you can change color, often materials. So it means that if you want, you can apply some seeing like like blue. And if I click here, I'm going to have this difference. You can apply some sink like Red, click on Select. And each time it's great because you can see here we have at lights, here, you have the shadows here. More at lights meet tons and hear more x2 acolytes and till. So black, white, Sprint. And that's it. After you can also select the type of color you can just click on custom plus and you can select whatever you want here. You have also other possibility. You can even go on this part. You have a color picker. When you click here, you can see leaked range of color. If I apply a range of Kuulab's, the sky, just like this, I'm going to move more with the y's symbol was a wise materials. If I click here prior to sample here, I'm going to have more gray blue material. And if I just select assembled here, I'm going to have more brawn material. So here it's not really good. So you can try with different samples, or you can go here and select a colour. This is the same principle. If I just sit exist pictures can just click here taking glands with just the y's first. You can see where this colossus arisen for which, so read bridge can have cease view. And after you can change that and think a glance, if I click here, I'm going to sit as a red color. And if I click here, mark something in early turns green and you find it here, you can have each time different view. So this is a type of things that you can do with invert. 43. Module fill light: We're going to see some model fill light. You can find these models here. In some models, tongue groups. With thin line, you have the possibility to walk directly, directly, observe shadows, and you are going to be able to change part of the shadows about exposure. So change the exposure of the shadows. And you can make some seeing quiz a more specific. And let just take an example. I selected this picture. You can take a glance or budget shadows on this part or against the shadows here and ozone part. If I drag and move my exposure, as you can see, I can reinforce liters a Shadows and I can decrease liters a shadow. But it says something he told specific. After you have a point here. And you can change the center of fill light. So it means that if I just draw it here, as you can see, you can change superposition of fill light like that. So here I am like this and I can make an offset and after I can walk with exposure. And really you can make some very interesting adjustment on the shadows. If one more time I moved my exposure to tell you on the left you can see I changed to tally shadows. And here with a wide you can change the location, just laziness of the shadows. It means that if I don't go to tell you on the right, it's also to move shadows outside. And it means that if I move the white here, if I move my exposure and nothing will happen, almost nothing will happen because the shadows is totally Woodside. My appreciates totally outset. So I need to come back and for example, position, if I positioned around the middle After I can work with exposure. And here it's going to concern yes. Moser at lights because you make some change. So for this reason I'm going to position around z spot and I will be able to walk directly here. And now if I try and move to exposure, I can change the exposure more on this part. You have also a wider so you can feed light area defined zone, defined in zone, and you can make, after, make more light inside so area such you have selected. Let's just see another example. I can take these pictures. And some principle apply fill light. So here it can walk with exposure to cook lens about the shadows. And after the things that you can do, it's to trust, move your location of point. And if I just move literal, for example here and our dragon move, as you can see, it's not going exactly in the same part. You can also use the color picker to select a range of tones. So it means if you go here, you will have, you can see this part. And after if you drag and moves the exposure, It's going to change because you have located this here. So if I tried here, as you can see, I have a small line like quiet it is located here. If I position more, just lazy, so I'm going to point here and after I can make some adjustment and walk with your exposure. Can also work with a wide lysis. So it means here I can, yes positions a wide moral exist. Exposure really told me tomorrow. And I can walk with wide. And yes, I think shades Nice. 44. Module RGB curve: Let's see. So model LGB, LGB curve. With this models, you can find this in the model stone groups. And you can work with shadows and at lights. So you can see on the back rooms or histogram, you can take a glance on new pictures were also shadows warehouse at lights, where are some neat tons? And you can work with different, different exposure of all z's part. If I just take 1 here, you just left-click. You can change its exposure of all your pictures so mobilizes. All you can decrease moral exempt. So you can darken our light. Turn your pictures. If you just walk just Isis with what? Just 1. Now, if you work on this print, this is a black points, so it means you can reinforce our, your shadows if you drag and moves a black print. So is this part. And if you just go on the right, you have, so at lights, you have y sprint and you can change the at lights if you drag and move the sprint. And you can reign for us. So contrast, you can add contrast. If you move like this at the opposite, you can decrease the contrast. So difference if you just move this sprint on this path, and if you just move the sprint on this part, so here you decrease. So contrast using so black print and using so wise point. You can also increase contrast, making 1 here, 1 here, and what print here. You increase the tells the sprint. You decrease liturgy sprint on this direction and you can have more contrast. This is basic curves that you can have in this type of careers to add more contrast. Now you can make some sings specific also. What does it mean? It means that if I just visit parameters, you can take a glance and use different use the color picker. I can take this part. And if I want to make small adjustment on the sky, I can, for example, take a point here. You have a line like this red line showing what the histogram, what he's going to correspond and emit this here. So if I drag it and move, I'm going to walk on the sky if I move this part. But as you can see, I'm going to move also in proportional way all my curve. So it means if you want to make more local adjustment, you can add a new dog prints in the middle. And you can phrase on per drag more lysis and I can make some adjustment on the sky. No, I would like to make adjustment on the osha. I'm going to select again my color picker, and this time I can just drag and move. For example, here. And as you can see now I have a new red line, new red line located here. And it means that my point correspond to this, to this range. My, my print correspond to this place on the histogram means that I can take this sprint. And for example, when I can change the color of the ocean or change the change the luminosity, change x2, as you can see. Yes, I can change the light of this part. All adds the opposite. So I can lighten, are at the opposite. I can duck. And if I just go like this, and it's useful because you can really work on different area. Now I continue, I move my brand and position this brand. For example, here you can see on the histograms are red line. It means that I can try to print and walk on this part. So in this example, I can work on different paths, lysis, laziness, and like this. So as you can see, it's something interesting to know. And depending can work on different print. I can position, for example, zs for small grace that we have at this lever. And if I just drag and move, IF and no dog prints here and I can try to change that or so. And that's it. This is a type of seats that you can do if I just visited parameter, you can walk also with assemble. So it means you can create something disease. And if you have here, it's extremely useful because he's going to position sweep point. So it's extremely poor fool because I know that now if I want to change this part of the ocean, He's going to select an area or zone. And after I can just take this sprint. And as you can see, just, let's do this again. I'm just going to show you again Cretan area, just lysis. And as you can see, you can drag and move the term point-like x_hat and no dot print here, and you can make more adjustment on near this part. Same principle. I can select no Daria. If I select here, as you can see, I can drag and move only this part, just laziness as you can see. So you can walk on two legs up. And you can also change the mode. It means walk with LGB and depend on channels. Here we can see the red channel, so green channels of blue channels. You can use a same typo, but this time with a different channels, you can select to print. For example, I can six this point, I know it looks at its here, can take point here and a point here. And you are going too well, but this time with directional, so it means that I can apply some red on the, on this part, just laziness or return on z direction more blue. So it's some see Antares chink and that little red part here. And I can go on my green channels and some principle if I want to make here assessment, assessment on this path, I can just select my picture and I can create a new dot print here, print around this part. And as you can see, I can drag and move and make some adjustment on the color. But on green channel and on this path selectivity. If for example, ice fix a blue channels and take part on Sky dressed like this. As you can see, I can make 1 here and a dot print or on this part. And I can change the color of the sky, just laziness. But I can also hear it's for blue channel, but you can also why not walk with a red channel and this part visit parameter change for LGB and depend on Chanel red channels with a copy curiosity to point on the sky, place a first sprint, placing a dot print, for example, around this path. And as you can see, if I drag and move akin change also some core loss on the sky. So I have my Sky Mall in red like this. I can change to have something more in blue. And because I work on these channels, these channels, and on this area with my color picker. So yeah, this is how to walk with LGB care of. It's something extremely useful, just going to yes, residual power meters. And you can do this type of welfare. Every pictures if I6 is pictures and TB care of some principle. You can each time city to print can go onto the sky just like this. And I know this is this print just like that. So it means I can drag in, change sky if I want to change the color. And this guy can walk with LGB channels. And for example, walk more with this part or more with Crane channels. And I can make some local adjustment, for example. And if I just come back to my LGB channels laziness, I can select an area like this green part can concern here. You can apply a print and make some adjustment. And so just like this. So this is how to use LGB curve. 45. Module RGB levels: Let's see some other LGB levels with this model's LGB livers. You can find this here with some other stone groups. And it works later, likes LGB cures but in a different way, but M is the same. You can walk with satellites, you can walk with the shadows, you can walk with mittens. And totally on the left here, you can have black print. So, so part of your pictures with some most black pixels, here, you have gray print. So part of your picture with meet tons. And here you have the widespread part of your picture with most wise pixels. And here it's mitten pixels farther gray print. If I just take a glance, you can see how is this pictures. And if I just move my black print, as you can see, we are going to rain frost also shadows because I'm going to move my histogram just lazy. And just I'm done. If I move my wife sprint on the left, I'm going to change, as you can see at lights on the sky and something like this. What does it mean? It means that you can first reinforcer contrast of more contrast. So you move your black print on the right and you move your wife sprint on the left, and you have so much more contrast. And the fact is that if I just double-click to visit parameter, each time that you move a black point are widespread, you are going to move the grey print at the same time. So it makes us after you can take a great print and you can make some adjustment or so, she, I can move, it shows a white Sprint and after I can drag and moves a great pregnancies direction. And this direction, just lazy IS something interesting to know, is here you can pick so black print from the image. You sit exactly and you can just see the eggs at black print is going to be addressed, going to resist that. And yes, so black print. Now I have my cursor. I can drag and move, drag and move. And I can see for example, black print will be like this. And Francis reason sucrose is going to move our can seek. So black print will be more here. And if I apply here is going to change near mittens. And if I apply here, I'm going to have RZ sings in black. So you need to select frustrated black print rhizome pair. I can apply why not here? And you can do the same principle with the gray print. And you can see your gray print, for example, define your gray print like See Spot are something like this. You can see is going to move a little and you can use the same process with why sprint. So you can drag and move your wife sprint. And if you apply a West print on a black pixels, you will see surrender. But if you apply your cursor on the white pixel, you can make some address meant yesterday slices. And you can see your cursor is going to move at the same time on this part. So this is a type of sync that you can do. You can also, here you have just auto, you can click on auto, but it's not going to be really good. I can really advice you fall too. You can select to print, just like this, click on auto, but it's not going to be really good. I can advise you to make disease by yourself. You can change SRGB link channel, but LGB independent channels. You can walk on directionals, onto grid Shannon and on the blue channels. If I walk on rich center, I can change my black print and make some adjustment, but my shadows trust slices. I can walk also with my wife, sprint, make some adjustments here. And if I just drag a can make yes, he turned more change on this part. You can do the same thing with the green shirts. So each time you can just drag literally your Coursera depending or but the results that you want to have. And you can do the same principle with some blue channels. So that's a type of things that you can do is that if I just take a look at our example with these pictures, LGB leavers and some prints back and move my black print reinforce the shadows here. Or at the same time I can move my wife sprint and rain from the sky. Just like this. It means that in this pictures I can change. What? I can change. So mittens, move my mittens on the left and I can change the lightness here and its beta. And I can just yes, change and change on the left. Just lysis makes small adjustment with so wise printer. So and I can have interesting resolute lysis if I move my black print and print is not going to be good. So you just need to move the cursor of the miter just like that. And this is another type of way to walk on shadows at lights. Also. 46. Module local contrast: Let's see some other local contrast. You can find these models in some adults tone group. With this model, you can work with contrast, but contrast adds a level of detail so it's something more specific. So you can work as a contrast, but only on the details on your picture on so different edges. You have to mode. You can work with the look and Laplacian filter. And you ever saw bilaterian Creed? Let's first start with locale Laplacian filters. You can increase the giver of details lazy so you can make more contrast. But to budget details, if I increase at intake against you have so much more details and contrast, just daisies. So it's not only about contrast, it's to create contrast above Details. She's a reason for which we cannot turn these type of phrase you'll take against bots are rocks. And yes, really, we can have amazing details also. After he can walk with applets. So you can change. The locale contrasts first only applies and after only on the shadow, so shack and drag and move and I can increase my contrast on the satellites. This is a reason for which you can take a Glenda, but the sky, so at lights concerns the sky. This is the reason for which you can see the small difference on this guy. If I move this cursor, if you take a glance about the shadows, he's going to work about some shadows path here we have the rocks with the shadows. And as you can see, we can have little different render on his shadow. If I just move this cursor after you have midtone range, some seemingly complicated define what counts as mid tones. So you can find you meet tons, change the number of cones if you just move here, just, you need to remember that it's literally like to apply, to apply your effect. If you just change your midtone to tell you answer left, you must use your basic pictures. This is the reason for which you can increase your fit with a midtone arrangement here you increase your increase, your increase, your increase or increase isis. And you can go and Yaso MIGA if you want to have one of the best level of details. So this is what you can do. You ever saw for just visit parameter, you can work on something different, which is a bilateral grid. And here you just need to walk on detail. Cross ins and contrast means a detach can increase your level of details, niceties or decrease it detects, it will be like to have some blue. So share your increase or detached. You can really see the difference. And afterall, you can change, make an adjustment about shore locale details. Here it's like to have to add some grain. It's just like to have some grain, just laziness. So on this part you have the feeling to have some grain. And if you just go here, not that you cannot apply like some grain. If you use Crossness. And after you can increase again bit Mozi contrast mode, but edges, as you can see, you can take a glance. So yes, this is a great filter and really a great filter to increase the contrast, to increase details, increase with details, have more contrast on the details. Let just show you this example. I can increase the local contrast, local contrast, local oppression filter increase details. You can really see the difference, can have amazing results with that. Can increase just liter after work most with at light switch means on the sky as you can see, but I can increase at lights also. And walkman on the shadows, just take a glance about more. Espouse the trees on the bag runes. And yes, you can make some address meant here. And after a walk with your midtone range, it turn range. So really if you want to increase details, you can use also local contrast. Because it's great, it's powerful. And this is something that you need to know and at the same time, it's Moss and just details. It's also to work with a contrast of the details just lays out. And we can have amazing result if you just walk for bilateral grid, increase detail first, just laziness. Or you can use this knowledge a little bit. And after Crossness or so can increase contrast. And yes. 47. Module zone system: Let's see. So modern zone system, you can find this model inside some adults tone groups. And here is a zone systems. The first things to do, it's to use moves. Will you use the mouse wheel here? And you can select a number of, a number of samples that you want to have. What is m? So m is to separate your pictures in different zones, different zones of a at lights and shadows. So it means if you move your mouse wheel on this direction, i, you can crack at least sweet zone, at least reasons. So here, so black zone corresponding to the shadows. So RZ spot here on the gray, I have my mom, my mittens. So it means more is this part. And here on the y's aria, why zone? I am at lattes. And after you can walk on each different zones and change x2 exposure. If you move your moves, when you are going to have different models, you can create Muslims. And for example here I'm going to have more my black print here, more shadows area or those shadows area to go to, to tell his wise print more at light. So Mozart at lights mittens and just like this. So you separate, differ, different area of your pictures with the different colors of pixels inside different zones. If I just come back to my Swiss Arne's, here, you have a small cursor. If I just drag and move, I can change the exposure of what? So exposure of the zone. It means if I go on the left, as you can see, I'm going to darkens the spout, darken this part because it's this zone. At the same time, you can also take the second cross-sell, so Susan, to cursor and you can drag and make some change more mittens. I can drag and make some move here or so. Just like these. At the same time I can drugging move here, drug and move here, and you can see the difference. So this is a way to make some adjustment. Now, if I just double-click and just visit here. And credit Muslims, for example, I can apply some seeing like six different zones. It's interesting because you can make more local corrections. For example, I can duck heater, mouseY spout, but after I haven't no doctor, so I can continue declutter this path. But if I want I can go walk more. You can see in yellow, so area zone I can walk more here and go literal on x2, right? And duck and lighten literals this part. And after I can move and yes, so you can make for really different adjustment. But here, for example, I can walk more on the sky just like this. Y I can walk more on your share and like this. As you can see, it's nice because I can walk also with light of the ocean. And at the same time, I can walk more. We see osha. And if I just move this cursor just like this. So you can really make some adjustment, locale correction with different area. So we can see the difference between these areas. He satirizes area. Now let's take another example. I'm going to just move with something different. And yes, let just take these pictures. I can change and some principles and system. You can move some of those whale and select a number of zone. If here you have some reason, you can see in yellow sweet different zones. And thanks to that, I can make some correction with our conducts. His son we do. I can light his zone, just laziness. I can take my second cursor and welcome all on the sky because it concerns a y. So it means all these area just like this. And I can drag and move in this direction. And for example, I can drag in movies. So here, if I create more, just visit parameter. Here, you have yes or can decrease liter. But crud, Muslims, just like this, I can make more local correction, so more black color here. And I can make my sky different. If I just move on this path, I can walk more with might turns just like this also. And yes, you can really make some correction, more locale corrections if you walk with a different zone. So you take a glance on this part. You can see with the cursor where you know the ozone and after you can make some adjustment. But exposure, just laziness. 48. Module velvia: Let's see some other valves. You can find this model's just in Colombia remodels. She's a great models to increase the Qur'an, to have bitter saturation. Stacy's, I'm just going to create here, or you can create different snapshot. Just going to go here, text snatch up first. And at the same time, I'm going to go in our basic models and Shell can find contrast, brightness and saturation. I'm just going to increase the saturation just to show you. And we saturation, you can have this type of friend or if I change totality, I can take a snapshot also, just bases. So here you can see with this saturation, just like that, if you use Silvia, if I just come back, for example, just remove these feasibility. Just lazy. So you can see I can go on contrast, brightness saturation and you can see really difference. Just lays out. Now I'm just going to go on Velveeta. And you can walk with what you can work with strength and maintenance gaze. So something great because here you can boost the saturation, increase saturation, and here you can walk between the lights and shadows are about the saturation. And if I use this to 100%, this is a so we have also a great result. If I take a glance on contrast, brightness and saturation, you can see it turns interference. When saturation, which contrast brightness, you are going to have maybe more effect, but not sometime it's too much. It's too much. If you use vail Via you can have better, I think sometimes render if you apply strain lazy. So I'm going to remove that. And yes, it looks nice to increase a coulomb natural color just like this. Q is trained midterms. Also, you can make some adjustment dress disease. So you can decrease it told your effect here, if I go on the right RFI gone director can increase little bit more and after you can work with the strain. But yes, it's really great to have bitter or Carlos just going to remove that. And just I'm just going to show you another example. Let's take these pictures. We can increase the SO2 tuition on these pictures to have bit render. I can go and Sylvia increases trained just like this. And at the same time I can walk with mittens. And yes, can have great render if you work with this default value. 49. Module channel mixer: Let's see, so muddled channel mixer. You can see this model in Socolow group. With this model, you are going to work with different channels. So it means you go on destination. You have the different channels in depending of your channel, you can crack modification. So it mean here you have destination for examples or channel read and you will absolute value on one, on direct channels. And if you'd moves a green, you are going to change, as you can see on the green channels. So color just IZ, so you can make adjustments and channels, but inside, so red channels. And I can just drag and mix them with education. I can walk also with my blue channels. And thanks to that, you can change. So January viewer and you pictures, you can apply some more hot colors. For example, if I just go here and here, like this, more color, you cannot Socratic 50K. Why small green color? If I move to blue and if I move the green on the left. At the same time, you can also work with the red part, just laziness. And yes, two type of things that you can do after you can change, for example, for the queen channel. So here you will have a value of one onto Quinn channels. And after you can walk with red, just exist and you can walk or so on, superglue, even if you can make adjustment or so with a green. And it works for everything. So each time you select here, just channels that you want, you can walk or so we saw blue, you will have a value of one fossil blue channels. And after you can drag and move sir, red, red cursor. And again drag and move all sorts of green crusher to have some effect on your picture. You don't stop just here to, you can also welcome destination. And you can walk on saturation and directly you have red, green, and blue. And if you move here, you are going to work. But on the channels saturations, his reason for which on the red channel Q can have some part became in a, more, in Cray, just like this, phi applies his value. If I move my Quinn channels is the same principle. You can walk in different value of grey and on the buccinator, same principle, just places. So you can walk also here. I'm going to show you everything, but you can walk with X1, X2, and rich, and they're green channel, blue channels. Some principle but shall you walk on? You, you can see things will be different and the same time you can walk. And so for example, you have lightness and some principality can walk on each channels, but this time on lightness. And you can walk also on X2 gray. So you seek the channels. And after seeing that you can do, you can walk with red, green, blue, but inside, inside the destination channel. 50. Module color contrast: Let's see. So model color contrast. With this models, you can increase the contrast but between Socolow. And in this example, it is green, ds magenta. And he sees brew v s yellow. And if I select this pictures, as you can see, if I just move on to the right, I'm going to increase the difference on my pictures between the green and magenta, just like this. So you can take a glance, you have green to have more green color on the different part. And at the same time you will have, can increase the difference. Just lysis says the reason for which we have green part on the lake, more green part on forest or so. And if I do the opposite, as you can see, I'm going to change lysis. Also blue VS yellow. So whether I can add more yellow color on your pictures with or you can move from Blue, Something like this. And you can also walk with two different colors. So Greenfield's magenta can increase like this. And after our blue VS yellow, I can also increase. And you can already see the difference. Can walk like this and increase the contrast. So more contrast green VS magenta. And mock contrast, blue, yellow. Going to show you an example. So I'm just going to move, move, move, and just it exists pictures, colour contrasts and principal green VS magenta. In something great because you can see the difference between can increase a colour in the path with the different trees, increase a color also in ocean just lays his few increase at an, at the opposite you're decrease. You walk with blue VS yellow, increase yellow, just laziness or decrease yellow dress like that. So it means in this pictures, if I increase Karina, Can I just render increase yellow? And as you can see, I'm going to have so much bitter Saturation about the corral on a different path. So it means on the sea, on the beach, on the forest here. And you have bitter green color, orbiter, yellow color, or blue color here, because I walk with my color contrast. So here's something interesting that you can, and you can work on this picture on something like salvia first. And you can increasingly tells a strained just like this with Velveeta. And after you can just go on yes, after you can just go on. Color contrast and you can walk, you tell with green VS magenta. And you can work this tell with blue VS hero. Just like this. 51. Module color correction: Let's see some other color correction. You can find this modal in so-called group. With this model, you are going to be able to change some colors. But whether on the ATL lights, whether under shadows. Here you have a white Sprint. So why sprint correspond to the ATL lights and you can drag your wife sprint and move to change the color on your atlas. And you will have a second print. So black print. And thanks to that, it concerns the shadows. And it means that you can change the color on NY, on your shadows. This is the type of things that you can. For example, I can take my wife's brain, so it means to work on satellites and I can make sky and Xu Xiang more red Lexus. And I can take my black print and from a black point it's more about the shadows. I can make my shadows mock increment. Just like this. Same principle if I want, I can make my Sky Mall in brutalizes because I go here and I can take my black print and make my shadows more in red, just laziness. Since the type of things that you can do with color correction change color, but only on lights, on shadows you walk on at lights and shadows, you don't walk on any things like saturation or use some symbolizes just on the lights and shadows. As I can increase Saturation just like this. And you can decrease the saturation. Here. Here increases saturation. You can see bit tells the difference. You can see on the satellite Swedish blue color, just like this, and on the shadows, the red color, two slices, which is sometime you can also decrease saturation. Yes, here. Now I'm going to show you an example. So for this reason, let's select an odor. Let's take the pictures. Any S6 is pictures. You can see the sky at lights on the sky. It means that if I use my color correction, I can apply some color on the sky using these. So I can have mice carrying more in blue or more in more in red, in green, just laziness and can apply this more in blue. If I take my brain for the shadows, I can change also with a different color. And in this example, I can use my wife Sprint and have my sky more literally in orange. And I can move my odor, print and phrase on per drag liter. Draghi turn NEA between the blue and the green curve. And you can make different render thanks to that, increases saturation, decreasing saturation. When I increase saturation, you can see so much beta is a yellow on the sky, or here's a raid on the sky or the queen on the sky, on the lights. And you can see saturation of the bridge. And I can walk with so with my shadow spreadsheets not going to be really good for simple reasons that I have too much saturation. So after can decrease your saturation. So this is how to use color correction. 52. Module monochrome: Let's see some model monochrome. You can find this model in the color group. So m of this model is to change your pictures in back-end wise so you can desaturate your pictures. You have different elements. We scroll up here and you have a cursor. You can use the mouse wheel, you can use the mouse wheel and you can change the size like this when you just move here, you can see your pictures in black and wise. And after. So m is what? Just to select a profile for your black and white and render. So you'd move to mazeway and after you can drag and phrase ONE person exists, profile can drag in silicon Moses profile. These profiles is preferred and depending of what you have on your pictures with a color, you can have different profile and different render for your backend wise. If you increase the size of your cursor, you will have this type of friend and not too much change because the cursor is big. And if you decrease, decrease, decrease, you can select a specific profile depending of what you want to have. Just like this. And yes. So this is the reason for which depends on you can see we have normally if I just remove here, we have the breach in red and support with a forest is in green. If I just apply. Here, you can see the bridge will be different depending of the profiles at Atreus. So bridge will be different. If I walk on, this red patch of bridge will appears totally different. But what I'm going to choose. And after you can also work with applied, so it means you can increase translates is applied, increase that lie decrease right? Lights, depending of the points that you can choose, how much to keep at lights. And here you can select arrange for example. And if you select arrange is going to select for you a type of profile, just slices. So you can see, for example, something more in the sky. He's going to be in the middle. But if you say something like this, so profile can move just litter, laziness. And this is how you can use monochrome. And each time you can have your pictures like this, you apply monochrome. And after you go on different models, phi zone parking gone by psychiatrists meant and I can walk with my black evil correction with my exposure. But inside my black and white pictures, just laziness. 53. Module color look up table: Let's see some other color lookup table. You can just find this models in so-called group. How to work with this models? You have different patch. When you go at this liver, you can see you have 23 pet, she's 23 pitches. And if so, m is two, you can find all these different patch here. As you can see, we have different line representing 23 different pitches. For example, i7, super-rich here, this is a red color. What does it mean? It means that if I see leaks or red color here, I will be able to walk with the lightness. I will be able to move green to red, blue, yellow, and increases saturation. So m is to work with a different color on your picture. I selected this red color if I change the lightness and willing to work with my bridge and with I can duck and Muybridge, whether I can lighten my bridge just like this. I can also change the color of the Bridge. Mall in green are more in red. Just as this. I can also change the color. Mao in blue are marked in yellow. And you can also increase the saturation or decreases saturation. This example, if you increase the saturation, you will move at the same time. You're different cursor, just disease. And yes, it's nice I can fries on bird increase and have my bridge so much whizzes, red color. If you are not sure about what is a patch to patch to use, you can just click here and you have color checker patch. You have the smart cursor, you can drag and move. And if I go on the bridge here, you can see this is this red curve. Now if I want to work more with a green color or more with forest, I can sit exam and as you can see, it's going to be so gray. So it means, yes, you can walk here, but maybe it's not going to be really good. Yes. I'm going to show you another example. Let's just select these pictures. If I select something like blue, so blue patch. And as you can see, I work for example, with likeness. I'm going to work essentially on the sky and Ozzie ocean. And I can for example, changes US blue, yellow and apply more blue on the spot. And it walks. As you can see, it works. And at the same time, if I want, I can apply more yellow color, but here I can apply blue and it works. If you have not shown, you can just select color, checker, patch, and some principle I can drag and move and city phrase on PR here and as you can see is this is this blue color. This is Moses blue-colored. If I move here, it says Moses gray color. If I move here, Mozi scholar. So yes, you can choose a different part. If I take this part, I can go in this patch. As I told you, I can increase Fei Zhan per liter. A blue colour dress like this. And if I change little, apply here, this is Moses gray color can make some sigma in blue, but I'm going to have effect also on the beach here. And if I drag and move just here, it's Moses proper color. And I can walk or so on, more on the sky, just like this. So this is what you will be able to do with the color look table. Let's see my last example. And we're going to walk also with this red bridge colo lookup table. I can take just color checker pass, acidic my cursor. Just apply on this, as you can see, this red color. And if I just walk with lightness, can also walk with my bridge, just like this. And at the same time I can walk, makes a bridge more in red. Again, makes some adjustments. Color. I can walk also with saturation. If I just change my patch. And let's apply something here, we are going to have this green color. And I can make some seeing more green lazy. So it's interesting because yes, you worry you can increase the green color translates this change lightness are increased lateness. 54. Module contrast equalizer: We are going to CSU model contrast equally zone. You can see this model directly in the correction group. When I select this model, you can walk with contrast, but with specific contrast. So it means on edges, you walk onto contrast of the details. You can find a mode Lima, you are so-so mode chroma entered, so you have the mode edges. If I start with a mode luma, you can see here on the left coalesce. He owns the right fine and contrast T and smooths just laziness. And it means that if I just work here and increase at, you can see I can have more contrast on details, but here I am in the middle. If you just double-click, you can come back. If you do the same thing on the left, you are going to increase contrast, but more January contrast. This is more general contrasts the way of 2F generally contrast as you can see. Now, if I double-click and do the same thing on Fina and increase that you can see the contrast are going to be more specific lysis. So it means more about, so details. Just dies. It just like that going to have more contrast on the edges, the details. It's nice. If you increase much more, you can see the difference hue, move your careful exits. Let's double-click. You can also change the size of your cursor. If you just use your mouse wheel, you can change the size just like this. And since the reason for which we can make something more specific and for example, you can increase just it, just literally disease. And that Sir, if you're just, just drag on on so back, you will have like to add little bluer because you are going to smooth and you can have this type of result like this. Each time that you make some adjustment, just like this, you can use mix. And thanks to that, you have this cursor and you can weather increasingly 50K with decreased effect. So it can decrease my feet, just laziness. I can increase my effect if I go on the right. Now let's walk double-click to remove that. And here I can walk on chroma. Since it tells the same principle, you can walk like that. But this time it's different because you increase X2 contrast but on something more like saturation. So work with contrast but about saturation. And as you can see, you can see the difference in the temples with colors. And that's it. So we can really walk like this and just go here on this part, we are going to have less contrast and sorrow. And you have also some sink like edges. And some principle can increase that. Move like this. And one more time going to have more contrast or bad edges. It's, yeah, it's not, we don't have too much effect when I walk like that. Really if you want to walk with details and the edges increases type of contrast you need to go and luma. And really you can have great effect as you can see here, here. Again here. You can also increase the cure of disease and take noisy and you can just drag and move detail on this button make interesting also adjustment when you move after just with noisy and S, we can have great research, can try to create a curve, utilizes, you can have to change for noisy here and make some adjustment around this part. 55. Module perspective correction: Let's see. So model prospective correction. You can find this modal correction group. How TO walk resists models. You have the possibility to crop rotation and you can also change. So prospectives, so first rotation, you can just drag and move on this direction. Just laziness. As you can see, my horizon is not exactly horizontal, so it means I can, for example, just turn little with rotation, just lazy, it's just little. And I can make some correction. Just laziness. Each time that you apply something you can walk or so with Len shift vertical, just laziness or in 00 direction. And you have lunch shift horizontal on this direction. On this direction. You can also apply shear just like this. Each time you can change automatic cropping. So it means you can go here and you can see the original format. You have also larger REI, it means that you can make some adjustment. You will have larger area, but I can advise you to use original format. And if you just make some adjustment, you can see with original format just Isis. And yeah, that's it. After all, when you click on a path like that, you can also drag and move and just select some part on your pictures, just like this. And after you can work also, lunch shift, just laces. And I'm just going to come back and two off just like that and just revisit so different parameters. You can also work with a difference, automatic fit. And each time you can see leaked is going to find to place different guides, just laziness. You can find also Zs here. But it's not going to be really good on these type of pictures. But depending of your pictures and time can be work and you can position different element after you have good structure. And that is line structure in image. So if I just come back to prospective correction going nine structure, you can see different structural line here. I'm going to show you after with an order example. So this is a type of things that you can do if I just show you with an order pictures and I just still exist pictures this time with a prospective correction. I can go on get structure. And if I can just click here, it's better because as you can see, I have a xyz building. I have the bridge here. And it's better to find a stricture after you can make some adjustment laziness because you have been structure and you can make automatic fit just like that. If I apply this, I can walk like that. Or if I apply this, I can walk also lysis. So you can change your perspective just with automatic feed. But Francis, you need to have a concrete structure and just visit parameters is a prism principle. You can apply some adjustment on perspective. Just lazy is if you want, you can apply or source or perspective here. And you have also share. 56. Module haze removal: Let's see some other as removal. You can find this model just in the correction group. With this models here, I have a good pictures because we can have, as on this pictures, we have also rain and for this reason, I can use as removal. You need to walk with two cursor, just trained amount of A's reductions and the distance limit A's removal up to specific special. And if I just walk with trend first, again, as you can see, change. So as on this pictures, but after I need to use this tense because it's not enough. For this reason, I increased distance. And you can see we are going to move the algaes lysis and remove till two halves. This result hits detail too much. I won't be able to remove totally as on cspan because it is also rain. But are ready, it's really so much better. Just going to remove those, but just take a snapshot. And so right, take snapshots. And lets walk again. I can increase the stance. This is time first, strained the sense strength. And yes, I think it's better just laziness and I can increase increase THE spot. And if I just take a glance before and after can also make some change. Exact, you can see the difference. I'm going to show you another use on an adult pictures. Just removes that remove to snapshot. And let's continue. I have this picture. She's also a great example because even if we don't have really, as on this path, take a Glenda buds of sky. It's difficult to have a good Colossians is pictures. And we have problem with this, with this part. And we can use also as removal models. I can also take a snapshot first and increases strength, crystallizes. And thanks to that, we are going to recuperate details color on these pictures using as removal, I can increase distance and take a glance. Yes, we have really, really great reserved just doing this models who have crit result to our Sees part. Now if I take a glance before and after, before, after, if I just turn just like this. You can see before, after, before after. So yes, something pour a full on these pictures. And in just two or three models, you can have great results with these pictures. If I just after, move in some sink in culture group or just in my favorite models, like contrast, brightness, saturation. I can increase the saturation and that sit in just two models. You can have a great result on this pictures. But so as removal models was great in this example. 57. Module liquify: We are going to see the model leaky phi. You can find the leaky phi model just in XO correction group. With this model, you can make some modification on pixels. And the m is to create an offset on the pixels. For this, you have three possibility. You can crud and draw point with a print tool. You can use the line tool and you can use a curve tool. And here you would just use your different element within not 2Ts. I'm going to select. So print tool. And thanks to that, I have a cursor here. And the things that you can do, it's, you can increase the size with the most Wheeler. You can increase the size, decreases size. At the same time. With this color wheel, you can also press shift. So if you press shift and the scroll wheel, you can increase the strength. Dressed like this. You can see the arrow. And at the same time, if you press Control and the scroll wheel, you can give a direction. What does it mean? It means that if I take a glance and eye position on the left lysis left-click, I created my offset of pixels dress like this. I am just going to zoom and to show you better, know the things that you can do after its, for example, Hugo, left-click, stay left click and you can change, so strange like that. Or you can change the direction and the strength. So I can make some direction here, for example, just laziness. I can increase the strength also like x_hat. And yes is a type of scenes that you can do if I go in this direction, not too much change. But yes, that's it. And yes, if you increase too much, you will have this type of result, as you can see. And this is a reason for which you can work with the default value is you just left-click here, stay left click. You can also increase the size of your circular or decrease the size of your chakra. And that's it I can make, for example, is typeof render. If you just click here, you can see the difference. Just doesn't. After you can walk also with the Line Tool. And I'm going to decrease the size also first and make less strained. And yes, first I can decrease the total size B20. And for example, I can go at this liver and left-click. Just like this first crowds of thrust print. And you can go left clique crud and autoprint. Left-click on autoprint, left-click on autoprint, dressed like that. You can just click, right click and you can stop. And if I just zoom, you can see litter difference. And after I can phrase on PER, just drag and move a print dressed basis. And as you can see, you can change the line position like that. You can see some change and some principle. You can increase the strength on a direction If you use each time arrows, I can see this arrow left-click, stay left click. And you can drag an increase size, just laziness. Each time you can see the number of lamps and number of notes. If I just remove that, you can see the difference. And the last thing that you can do is to use the Curve tool and can do the same principle. I'm just going to recede parameter to show you is a curve tool. I'm going to stick to a position like this crowd here. And you can also make anodal print like this. And you can create a job. This is exactly like to cry to line, but this time it's a curve and I can come back just on this direction, right-click to stop. I position different print. And I can make increased phrase on per this branch if I want, I can change the direction, laziness. I can also change the direction phrase on paramecia and that's it. So you can make some change. If I just remove, you can see the difference. You can see the difference. So leaky phi is this. You select different print and sinks, 2-SAT. You can change the pixels, you can create enough set on pixels. 58. Module retouch: Let's see. So modern H2, which you can see this model into correction group. How to use these models. I'm going to isolate t This pictures. Just zoom on these pictures and you can see the different boys. And I would like to remove boys or boys. I can go on to write in my tools, I can create different types of shapes here, like circle, ellipse, like this, but you can also add Pass, you can add a brush. And here I can just show an AD chips on your pictures. Here. If I just go on this part, you can also select veil Villette, decompose. I'm going to show you these just after. First, let's make something basics. You can see links are Tulsi occur. You can just, with x2, you can just change that with the scroll when so increase its size or decrease the size. At the same time, if you press shift proofs, so scroll wheel, you can change the phase of size. Just like this. As you can see, you have to see occur. And if you just use control plus scroll, you can change the opacity. We can see our trends opacity here. And you can also, now I'm just going to walk we shift control, decrease feasible, and just decrease the size. I'm going to select this and just click on this bureau analysis. I just go left-click and as you can see, he's going to propose another part. And thanks to that, it's nice. You can also drag this part to select another argument. If I seen it, for example, to rock, I'm going to have a path of Zurich here. But if I see like here, I'm going to have this part of the ocean. Generally he can propose interesting things, but you can change that. Sometimes. I can adjust. Sometimes if you want to make the same thing on an automobile, you need each time to come back on ship and take you again, sir. And I can do the same principle here. Think I have too much size, I can decrease, change the fees are also, yes, just disease. And I can click here. And same principle. After I need to select against shackle, click here. And same principle, circular pitch here. C occur here and click here. And just like this, each time, as you can see, we have a nice render and you can just click on this path to see the result. And you can do the same process, but this time with an ellipse. So this is exactly the same. You have just an ellipse, you click here and you can check this out. Another difference is that with your ellipse, you can make some adjustment. You have different print because it's not a seeker. You can also work with surpass. So it means you can just to correct past lysis and at different, different print and after. If you just go left click you can after and drag and move your pass on anodyne direction. It's nice because you can also duplicate your element or just move your element just like this as you can see. And you can also work with a brush. And with a brush you can just select some Singh laziness. And it's not, I don't like to use a brush. Ok, something really, really, really good. I can advise you to use really secure elifs and sometime pass. And thats going to resist the parameter. If you want to do here, you have different type of algorithm that you can do. Activate healing tool or activity pruning tune if you use cloning tool. Finally, it is going to be exactly the same. So you can select to be oil. You're going to have the same result. If you want now to add Bureau, I'm going to select my circle tool and instead to select and CBI. I'm going to go for example here and do the opposite process. So it needs a drag and moves the spot to recuperate. Abuse, just laziness. I take my ellipse, go fries are parallel here and drag and move to recuperate. And no donald bureau, I select my circle tool, just click here and recuperate, for example, an odor on pure. And this is the type of thing you can do. Now let just introduce the wavelet decompose with a very flip decompose, you can just click, you have two cursor here, sittings a second cursor. And you can scale x2 number of parts that you want to have when you arrive. For example, you can see MX scale is nine for this image size, so I can stay in nine for example, or less. And each time that you click on something, just like this, you are going to have nice render to see better the details. But if you want to see that, you need to click here display wavelet scatter. Thanks to that, I have this type of result each time you can go on each step. And depending of the step that you choose, on the number of scale, you can see different levels of details. But each time, for example, acidic here, I don't see anything. You can see the previous single scanner. You can just go underwrite auto levels, things too that you have this type of frigid. And you can move, walk with a different person, but it's not really good in this step. So you can change the step. And if I arrive, for example, yes or on this step, you can see the details and you can see superiorly. And after you can make some adjustment with different cursor, just like this, can make adjustments here also. You can start also with auto leavers. And I have this rigid, but it's not going to be really good. I prefer to make some change. And you can do the same type of presses. For example, I can go like this and I can zoom. You can see where ouzo details I can use again, my ad circles here, drag and move and is going to be semi-transparent. But you can have more or precision or you can find the different details. I'm going to show you another great example. Just removes this part. Go I would go and my writeable mode. Let's see licked, a well portrayed folder. And let's see it exist picture. As you can see, you can find different spot on this face. I can start to zoom here. And Guernsey, Right? Let's apply reteach. If I don't use the wavelet decompose, I can just select a shape like a circular again. And you address a different parameter with the size you can press shift to work with Visa, also with a sing on circle. And you just need to click here. And after he's going to find something just beside, and that's it here. It's not going to be really good. I can yes, walk like that. I can, for example, move here, you can see a spot like this. I can use one more time. Craft, an odor shackle, click here and drag and move. Can use this circle QC here. And yes, this is a type of sync xhat. You can do just like this. As you can see, it's nice. Now I'm just going to resist the parameter and just take a snapshot, frost take snapshot just like this. Now if I apply a wavelet decompose, I can increase the number like this. One more time. Max Scale is eight for this image. No, not to blush. You can decrease the US make some seen like six if you want. And if I just click here, display wavelet scan. Just its comeback. Here. As you can see, I'm not going to have nice render. So you need to go at this lever and that's it. Auto leavers. You can see whereas a different spot and you can change to a different type of precision. You can each time change the scanner, trust lysis. And if for example, I, you plays a scale, I can see two different spot. I can zoom a little bit small. Just like that. You can see is a spot here. And you can have afternoon walk with different cursor. I can make some adjustment like this. And if I just move this cursor in the middle, I can change this spot. So for this reason I'm going to use the circle tool. And here Now what can still exist spot and just drag and move to an order type of skin. At the same time, I can create a new ship at Shakira again. And SID exist part and some principle. I can take the zircon, just decrease the size, takes this part one more time. And you can walk using the wavelet decompose. But if you want, you know, to blush to use these, so it means can just come back with my view just like this. And yes, you need to come back to just zoom meter outside. I can have my different residual Soviets. This is type of things that you can do. So now I'm just going to revisit xu different parameter, visit everything on this pictures, and just select, again my rate huge. Just make some sink basic. Using the circle. I can zoom and let's remove the different spot. Can go here. Just laziness, can continue, and just drag and move. Zoom a little bit small. And each time you apply a new circle, exist. And I can continue with the circle tool again, each time you create a new ship and each time you can remove so different spot. Rationalizes he knew here you need to be careful. Neon. So noise just like that. And I can continue. Can take here, can take here, just like this. So if I just take an example, It's a snapshot. You can see the difference before, after, before, after, and just sometime. You can just click here. And thanks to that, you can just remove two differ on view. And yes, you can see the difference. I can remove Rs or spot, just laziness. So yes, it's nice we can have great result which is going to change fit to screen and just removes the snap shop, just lysis. And yes, you can see the difference. 59. Module spot removal: Let's see, so muddle spot removal. You can see this model into correction group. With this model, you are just going to walk like Zora Touche model. It means that you can select a shape like this. And after you can remove some element or you can apply Erdos-Renyi man. So I'm just going to click Control and zoom on my pictures with a scroll wheel and some principle with a boy. I'm just going to click on add seeker. I add the circle. You can just move with a scroll wheel. Size of Yasi occur at the same time, you can work with what? You can work with, shift and scroll to a change in the physical size. And at the same time with the second circuit, and at the same time you can change the opacity with control plus so scroll, wheel and you can walk and so is opposites. Now if I just keep an opacity of 100%, I can change litter the freezer and literally x2 opacity. I can just sitting superiorly here. And he's going to find another part of the picture just below. And after you can drag and move to silicate, you want, each time that you want to remove a node or any magic need to add an order, a shocker. So I can take this part and some principle, I can add new shocker take parts and principle can I don't know their soccer takes this part. Can, I don't know. There's shocker. Drugs is proud. Takes this circular, again, takes his soccer. You can also change the shape. It means you can use the Ellipse and can work with any ellipse, also can hit here. And as you can see, because so ellipse you can change, you can change your ship. And you can walk also just with a pass. So it means you can just crack, tries to pass laziness with different print here. And if you just go right-click, you can just drag and move your pass. And thanks to that, you can create enough set with your elements so you create a bus and lysis, you can create an offset, as you can see, this thing also to do this. Now, each time I can combine, you can do the opposite process. What does it means? It just mean that sat, I can use my circle. I can take so prints here and just drag and select anodal bureau. I can phrase on parole, take, apply another shocker just here and just sit exists part. I can also zoom literal out. Can just zoom little out. And I can do the same process if I just drag and move. You can see those are type of imperfection. And you can do the same type of process for every scene. For example, you have an element here. I can use my soccer, Increase the size first and credit selection and just drag and move to ever know dark path I can take out. So my ellipse, just lazy so I can position my ellipse on the spot. And some principle, I can select something different and it walks, it's nice, it's a very convenient tool and can just try here. You can try to remove this part. It's not going to be easy, but you can make in different, you can try to do something like this. And after just drag and move here and it's nice, it's also a great result. If I just take a glance, removes the visibility and yes to very great result also. So you can make interesting things using this tool. If one more time, I come back to my late table mode and just see leaked zs portrait, trust like this. And one more time we can remove the different spot. So it means we can use so refuge tool, but we can directly use the Spot Removal tool. And just at Shakira, we can first go here. Select with a different parameter. I can add little fizzles and I can click here. It's not going to be really good. Yes, make some adjustment. Just like this. It's not really good here. And I can continue. Make adder again, a shocker to exist print. Just like this. Maybe I can increasingly tells a phasor. I suggest that you need to be careful. I'm going to give you an example when I zoom here because the light depending of the skin is not the same everywhere. And for this reason you get this. We don't have a great result. If for example, I sit exists, but it's not going to be good for the simple reasons at the color of the skin is not exactly the same with the light. So I need to make some adjustment and to just go just p-side, just lazy state can be better. And yes, as you can see, it's not perfect here. It's not bad that you need to find the right address meant I can continue and go on this path makes some address mental. So if I apply a new circle one more time, also you can try to select another shocker, can take this print as you can see if you see like here, it's not going to be really good. You need to be careful going litter on the left. And sometimes they're Israel to 1B in this example better than role models. So you can use the two models. You can also send up of results but removal, it just easier for the simple reasons that you just see leaked. A basic shape and after you can remove so different elements of spots that you want. And if I just come back feet to screen, yes, you can have reserved just laziness. 60. Module watermark: Let's see some other watermark. You can see this model in effect groups. Here you have the possibility to integrate what Tormach on your picture of the first things to do, you can find different marker disease. And as you can see, you can sleep just that table. And that table you will observe different information on your pictures as you can see also information that I have here. I can find these different information at this time with also a camera and most sings and you have also icon of a deductible. You can change the macula. So you have also xrays, but I guess it's not really good, but you can also places you have promo and here you can find that table.org rises with different information of your pictures. And you can also enter text with simple text. When you use simple text, you can change the color with select watermark, colo and Shaffer. I want to make some seeing in red for example, I can change if I want to exist in y's, I can use Ys. And you can take some sink here. And in this example I can just step what? Mak, When you type some seeing here, automatically, automatically you will have Zs on this path. Maybe I can change for uppercase what tarmac. And you can also change the font family. So you go at the slivers and if you want to use different from family, you also the possibility to change, as you can see. And I would side of that, outside of that, you can have different properties. So while quiz opacity Walker, So we scan, as you can see, you have this on all my picture in the middle, but you can use scale and smaller in the center. And I'm going to show you that you can change the location of wetter mark. You have scale, you can create torso rotation like this. And you can also walk with x2 position. So when you arrive here you have a ligament. By default, you'll be sent, but you can make sees, for example, on the top left corner. Here I'm going to come back center on the top, top right corner, on the right, on the left. Just like this. So you can change location. For example, I can position just here. And moreover, you have the possibility to create an offset on the X axis and Y axis. So you just need to drag and you can move x0. So we, for example, it's too much. Here. I can just create a little upset on the x-axis. And it'll offset also on, so y axis. Just laziness and yes, it's nice, something nice at the same time. And that's it, that's it. So you use your content, receives a mock yells at you want. If you want to edit your own marker, you can see like simple text and also text here, change the font family and the clause. And after you can gently walk with a property so I can reduce my CT scan sees and you will be able to find the location just with the position found to come back in center, I can apply the center scale again, translate these, can use these into top. Here, it's not really good. I need to credit offset. So I just continue and go on. Why upset. And I can move, for example, on the sky. 61. Module framing: Let's see. So model framing, you can find this model in effect group. It's great because you can create a frame on your pictures. It's something interesting to know and to use. First you define as peaked with Zubaida size, you have bought us ice here you can craft a broader and after it will depend about the aspect. Generally we use constant broader because you will have the same size on the size of your pictures. But you can change for different aspect. For example, you have image. You can change. We far one, just laziness. And as you can see, I can walk with my brand or size after. You can change also 69 slices. So you can have different, different type of Bordeaux. And after you can walk with the aspect ratio ratio also, just like this. But if you change the aspect ratio, you will come back just in customs Keystone. So it means it's to you to work with the aspect ratio that you want to have. Are you select something here? Generally we use, as I told you, constant border, you have something constants and after you walk with your border size, and as you can see, it's proportional on each side. After to continue, you can change orientation. So here you have to contend portray landscape, but here it's not going to be available when you work with constant border. And you can change horizontal position. Your pictures more on the left or on the right, just laziness. Or your picture vertical more on the top or the bottom. If you want to keep this in the center, just Double-click and stay in the middle. You have a sort of frame line size. And it's interesting because you have frame line size, frame line of set. Also. It means that we can have a border color. So here it just basic broader. And after we can integrate a new data frame line inside. So first border color, you can change the color, can apply some sink in red. I can apply s