Crafting A Paper Flower | Makiko Orser | Skillshare

Playback Speed


  • 0.5x
  • 1x (Normal)
  • 1.25x
  • 1.5x
  • 2x

Watch this class and thousands more

Get unlimited access to every class
Taught by industry leaders & working professionals
Topics include illustration, design, photography, and more

Watch this class and thousands more

Get unlimited access to every class
Taught by industry leaders & working professionals
Topics include illustration, design, photography, and more

Lessons in This Class

8 Lessons (17m)
    • 1. Crafting a Paper Flower

      1:04
    • 2. Petal Design in Illustrator

      1:50
    • 3. Make a Set

      3:48
    • 4. Layout Tip

      1:40
    • 5. Print, Draw and Cut

      1:47
    • 6. Center Piece

      1:52
    • 7. Put Together

      4:57
    • 8. Final Thought

      0:20
  • --
  • Beginner level
  • Intermediate level
  • Advanced level
  • All levels

Community Generated

The level is determined by a majority opinion of students who have reviewed this class. The teacher's recommendation is shown until at least 5 student responses are collected.

489

Students

1

Project

About This Class

Paper Flower has been very popular for wedding decor, baby shower, bridal shower, event decor, and even just for kids room and nursery. It's easy to make and gorgeous addition to your home and events. 

In this class, you can learn how to make a template for a paper flower in illustrator (basic illustrator knowledge necessary), and how to actually craft a giant paper flower. If you just want to jump in to crafting part, you can skip the first part and start making. You can download a template I made in this class from class section. 

What you need for this class: 

- access to Adobe Illustrator (if you want to make your own template)

- card stock paper heavier weight

- card stock paper

- scissors

- pencil

- glue gun (low temperature one) 

- glue stick (for glue gun)

- ruler

- round edge pencil or rod for curling

Please use discussion board for questions and comments! 

If you are interested in more about my templates, please visit my etsy shop.

This class has two parts: 

1. Designing your own paper flower template in illustrator. 

- how to make a design, make different size petals, layout for print and layout for cutting. 

2. Crafting a paper flower. 

- print template, cut template, draw and cut petals.

- put together a giant paper flower. You can make a flower approximately 18 inch diameter. 

---

Audio Credit:

Ason ID - Xander by Ason ID https://soundcloud.com/ason-music Creative Commons — Attribution 3.0 Unported— CC BY 3.0 http://creativecommons.org/licenses/b... Music promoted by Audio Library https://youtu.be/xy7Ww3SfxGs

Title: Happy Mandolin Artist: Media Right Productions Genre: Country & Folk Mood: Happy

Meet Your Teacher

Teacher Profile Image

Makiko Orser

Illustrator/Graphic Artist/Portrait Photographer

Teacher

Hi, I'm Makiko Orser. I've been working as a freelance illustrator, graphic artist on the side of having a successful portrait photography studio in Michigan. I have a degree in graphic design from California College of the Arts, have experience in character designs and novelty items and children's magazine publishing from Tokyo, Japan, San Francisco, Los Angeles, and New York, USA. 2019 is very special, my first book-mindfulness art journal, Fill This Page will be published (December 31, 2022). Still, I love learning new tips and techniques, creating and exploring, and being inspired. Hope to see you in my class!

My website: simplymakiko.com

Social Media: Instagram, Twitter, facebook

YouTube Channel: PaperLuv

Etsy Shop: kikistic

Spoonflower: simplymak... See full profile

Class Ratings

Expectations Met?
    Exceeded!
  • 0%
  • Yes
  • 0%
  • Somewhat
  • 0%
  • Not really
  • 0%
Reviews Archive

In October 2018, we updated our review system to improve the way we collect feedback. Below are the reviews written before that update.

Why Join Skillshare?

Take award-winning Skillshare Original Classes

Each class has short lessons, hands-on projects

Your membership supports Skillshare teachers

Learn From Anywhere

Take classes on the go with the Skillshare app. Stream or download to watch on the plane, the subway, or wherever you learn best.

Transcripts

1. Crafting a Paper Flower: drafting a giant paper flower. This'll class consists of two parts. First, I will show you how to design and make a template in Illustrator. If you don't eat this part, you can skip to the second part in which you can learn how to craft a paper flower. Making a paper flower is really fun and easy. You can make as a kid use as a nursery decor and events such as baby showers, bridal showers and even weddings. As a class project, please make one giant paper flower and posted in students Project section so it will helpful other people's inside about this craft. You can make your own complaint or you can use my can play as a gift to you. I included the template I made in this craft so that you can jump start. If you have any comments or questions, please use class board section. Let's get started 2. Petal Design in Illustrator: first Open illustrator and this is 8.5 by 11 regular US paper. And this is just a photograph of my sketch. And today I'm going to make this better. First, I'm gonna start with the shape that's closest to design I choose to make. So in this case, I start with jungle. You probably have a basic knowledge of illustrator in Hell pen tools work. So I'm know, going over each step, how I made it my design. Basically, you move points around at points until you satisfied your shape. One thing is that I only work on one side up the paddle. When I'm satisfied with one side of the design. I cut out the other side using Pathfinder, then using clip to copy good design to the other side, then select both and using part fine again. Teoh Union 5/4 Shapes. That way you have left side and right side, same design, then use mental and click of some of the extra points to clean out 3. Make a Set: Okay. This is how you can make multiple sizes from this one. Pedal selective Peto scale Double quick and uniformed. 85% and copy. After that. Command Ik Mandy Mandy. Now you have five different meadows. I'm going to select all. Make it up one point, then into the bottom. There. Now I'm going to refine those pedals first. I don't like those two sides. This is look kind of similar inside. I want this one to be the little smaller, this one also smaller. But that and then for the printing purposes, I'm gonna separate those photos in the different pages. First, make art board border needs about three pages. Dance for those five pages. It's about right. So you have to think about the printer safe area. So I'm gonna look to the center as much as I can. Each printer has different settings and then another aboard make picks a gun. So this hexagon will be the baseball, But those meadows together, So I want about the same same size. What this end about, right? They're so sometimes extra one sometimes use for certain one 4. Layout Tip: Okay, Basically, your template is done, but one more things to consider. This is a template. And first you prentice out in a bigger cod stock, and then you cut it and use to draw those Beddoes on other card stock papers. And when you do that, you don't want to waste a lot of papers. I lay out this way so that it won't cut. But once you have this template, you can go to the edge of the papers. Teoh draw those patterns. So in order to do that, I want to see how those photos lay on the paper. You can actually go all the way to the edge and you wanna get those photos. So when you make of different design photos, those are the good things to consider, because when you start drawing those patterns, Teoh the papers and then it won't fit in. A lot of piece of paper's going to waste you. I kind of feel bad and, oh, you know, just a little edge smaller, it will fit. Then you can adjust it here and you can make it flowers in a little bit economic way 5. Print, Draw and Cut: now I printed my template in card stock paper. Those are the tools you need. A mechanical pencil, eraser, scissors, glue, gun ruler and cut stuck papers using the templates. Job shadows on the papers of your choice. I am using card stock here. You will need six photos. Each side's next cut out each pedal. This is a kind of paper I use. You can save your templates and you can use many times I put in a pocket file and I just got the binder So here's how I save my templates. 6. Center Piece: here, cut potatoes. You will need six Beddoes for each side's for this flower. But once you get used to making paper flowers, you can arrange the way you like. Some hexagons so goes and just strip of paper for the center. This is how you get make centerpiece with the strip first, fold it in half, then cut skinny lines. Leave about quarter inch attached. Make another one without folding. The paper still was the one. Fold it. Roll up from the edge. Use hot goo as you go Theun at another layer. After glue is dry, open up like a flower center. 7. Put Together: in this section, I will show you how to assemble flower before gluing Beddoes. First thing you need to do is curling pedals. You will need something like round edge pencil. Now there are more than one way to do this so you can try a different way and see what you like. E think I'm gonna decide curling outside for this class. Start with bigger petreaus. First work on 1st 2 years. Next, cut a slit on the bottom of the photos. This will make photos look three dimensional when you're ready. But hot glue over up this park and glued together and repeat this process now using hexagon as a base, glue each pedal in each side Now just Beddoes first. Here's a circle piece in between. Guru, second layer of Petros alternate the position I normally work. Medal to smaller pet does separately. So that's the flower Has even look when you glue the centerpiece first, lightly place it, rotate the flower so that you can see it's really center or not. Then secure the petition. If you make a bigger base and put more pedals, you can even make larger size flower. This one with basic six photos is about roughly 18 inches across now the last part attaching metal piece to that outdoor layer of the flower. Check where you want it first, then put hot glue lightly. Place it, take the balance by rotating the flower. Then secure the glue. They were done. Congratulations. 8. Final Thought : last Not. I used three m Velcro for attaching a flower student wall. It's easy, messy, free, and you can change things around. I hope you enjoyed. Thank you for watching and through the next time I