Adobe Premiere Pro CC Fundamentals : Master Video Editing 2021 | Anil Soni | Skillshare

Adobe Premiere Pro CC Fundamentals : Master Video Editing 2021

Anil Soni, Graphic Designer

Adobe Premiere Pro CC Fundamentals : Master Video Editing 2021

Anil Soni, Graphic Designer

Play Speed
  • 0.5x
  • 1x (Normal)
  • 1.25x
  • 1.5x
  • 2x
33 Lessons (2h 51m)
    • 1. Introduction to Adobe Premiere Pro CC

      2:41
    • 2. Setting up project and sequence in Premiere Pro

      7:04
    • 3. Creating a new project with system issues in Adobe Premiere Pro

      7:42
    • 4. Reviewing the Interface of Premiere Pro

      7:40
    • 5. Marking Clips in Source Monitor in Adobe Premiere Pro

      9:09
    • 6. Marking Clips in Project Panel in Adobe Premiere Pro

      4:12
    • 7. Creating Subclips in Adobe Premiere Pro

      5:27
    • 8. Building a Sequence in Adobe Premiere Pro

      2:42
    • 9. Adding Clips using Insert Edit in sequence in Adobe Premiere Pro

      5:37
    • 10. Moving the Clips around the sequence in Adobe Premiere Pro

      4:30
    • 11. Targeting Destinations in the timeline in Adobe Premiere Pro

      4:11
    • 12. Splitting and Deleting the Clips in Adobe Premiere Pro

      5:16
    • 13. Top and Tail Editing in Adobe Premiere Pro

      2:52
    • 14. Track Targeting and Sync Lock in Adobe Premiere Pro

      5:58
    • 15. Overwrite Edits and adding blank spacing in Adobe Premiere Pro

      3:24
    • 16. Perform 3-Point Edits in Adobe Premiere Pro

      5:26
    • 17. Ripple Edit Tool and Rolling Edit Tool in Adobe Premiere Pro

      5:34
    • 18. Slide and Slip Edits in Adobe Premiere Pro

      3:42
    • 19. Editing using Trim Monitor in Adobe Premiere Pro

      3:05
    • 20. Adding and Deleting Tracks in Adobe Premiere Pro

      5:35
    • 21. Track Output and Locking Techniques in Adobe Premiere Pro

      6:26
    • 22. Using Markers for Editing in Adobe Premiere Pro

      6:00
    • 23. Reviewing the History and Markers Panel in Adobe Premiere Pro

      3:53
    • 24. Customize Transport Controls in Adobe Premiere Pro

      3:45
    • 25. Importing Images and Working with Stills in Adobe Premiere Pro

      4:02
    • 26. Animating Stills in Adobe Premiere Pro

      7:01
    • 27. Transitions in Premiere Pro

      7:01
    • 28. Modified Transitions in Premiere Pro

      4:34
    • 29. Applying Multiple Transitions in Adobe Premiere Pro

      3:49
    • 30. Creating a Basic Title in Adobe Premiere Pro

      5:39
    • 31. Adding Rolling and Crawling Credits in Adobe Premiere Pro

      7:07
    • 32. Exporting the media in Adobe Premiere Pro

      5:45
    • 33. Exporting for YouTube and other Specific Media in Adobe Premiere Pro

      3:49
  • --
  • Beginner level
  • Intermediate level
  • Advanced level
  • All levels
  • Beg/Int level
  • Int/Adv level

Community Generated

The level is determined by a majority opinion of students who have reviewed this class. The teacher's recommendation is shown until at least 5 student responses are collected.

7

Students

--

Projects

About This Class

Learn how to edit videos in Adobe Premiere Pro with these easy-to-follow Premiere Pro video editing tutorials.

Start your Video Editing Career with Premiere Pro CC and create professional productions for film, TV and the Web.

From the Author of the Bestselling and Highest Rated After Effects Complete Course, comes a brand-new course for Premiere Pro.

Adobe Premiere Pro CC Fundamentals : Master Video Editing - The Highest Rated and Bestselling Course in Video Editing

This course comes after countless requests from my students who loved the way I teach, and how I explain things by going over intricate details so they can better grasp HOW and WHY things are done.

I created this course for you to learn Video Editing and Premiere Pro CC from fundamentals to advanced techniques.

You will learn how to edit the Interview and create a montage that tells a story. Assemble with additional footage to create an even more dynamic, exciting story.

Or come up with an awesome and original video using the same footage. It’s open to your imagination and what you want to create.

Everything is provided: a complete and comprehensive setup to start you up in Video Editing.

The Main Topics you will learn:

  • How to efficiently import and organize your media. You will learn several methods to give you the freedom to adjust your work flow to suit your preferences and will develop your own style.

  • How to go about editing a complete video. A step by step comprehensive post-production process. If you’re aiming to become an outstanding Video Editor and Build your career, this process is essential.

  • With this step by step process (Section 13), I will guide you to create your own unique Demo-Reel which you can then upload to any site as proof of your newly acquired pro video editing skills.

  • All the editing Tools and How to use all the Editing Monitors in Premiere Pro CC.

  • A comprehensive approach to Color Grading.

  • Transitions being an essential part of video editing, you will learn how to apply, modify and time the transitions effects using various monitors. You will also learn how to create your own transitions using animation within Premiere Pro.

  • And of course, other topics are included such as motion and animation, graphics and titles and so on.

Meet Your Teacher

Teacher Profile Image

Anil Soni

Graphic Designer

Teacher

Hello, I'm Anil.

See full profile

Class Ratings

Expectations Met?
  • Exceeded!
    0%
  • Yes
    0%
  • Somewhat
    0%
  • Not really
    0%
Reviews Archive

In October 2018, we updated our review system to improve the way we collect feedback. Below are the reviews written before that update.

Your creative journey starts here.

  • Unlimited access to every class
  • Supportive online creative community
  • Learn offline with Skillshare’s app

Why Join Skillshare?

Take award-winning Skillshare Original Classes

Each class has short lessons, hands-on projects

Your membership supports Skillshare teachers

Learn From Anywhere

Take classes on the go with the Skillshare app. Stream or download to watch on the plane, the subway, or wherever you learn best.

phone

Transcripts

1. Introduction to Adobe Premiere Pro CC: Hello and welcome to this new course days. My name is annealed Sunni and I'm your instructor on this platform. Ok, so let me just give you an introduction about this goes case. In this course, you will going to learn about the basics of Adobe Premier Pro. This course is designed for those diets, would not have any knowledge of editing visual effects. How, that is, how people are creating movies like Harry Porter, Game of Thrones web series and lots and lots of things. This course will guide you to the detail which will help you to become a bro editor. Guys. In order to become an expert, you just need to be efficient first in the fundamentals. So you should first revise the fundamentals and then you can steep your shoes inside the competition in this core glaze, we will first see and understand in detail what is the interface of Adobe Premier blue. How to import a media, whether it is after effects, whether it is new or whatever media it is, you can import any media on this platform. Then we'll see some of the basic editing technique guys, which will help you to generate a pro editor. I will share my techniques which helped me to drive into the production from the last n years. And some unique editing techniques which will help you to retain in the organization. Then we'll T The mastering the timeline days. If you can able to master their timeline, you get invited to handle any complex project in your life things, okay, then we work upon the still images days and try to do some animations on the still images and see some other transition which will help you to generate with your transition between the clips. Then guys, we'll see how to add a title and Export Media specific for YouTube, bio meal or whatever specific platform you are, moon. Okay, so what are you waiting for guys? Join this course and I will feed you step-by-step how you yourself can become a brew educator. Within few are 2. Setting up project and sequence in Premiere Pro: So I'm in this dashboard, you can see this how Premiere Pro looks like. Ok. So when you click on this, I am using this, Adobe Premier Pro 2020, okay, you can check out that. So you can see this. I'm having a new project, okay? And open project. So these are the list of projects that you can use that you can store. And if I wanted to create a new project, okay, I just need to click on this new project, okay? And you can see this whole description that you can see which I am having for my project, okay? So you can create a particular title. I can give anyone. You can say that the new project. Okay? And you can see their descriptions, okay, right now we are not dealing with these kind of things because it's too we don't want to focusing on in detail, okay? Because for Adobe it will automatically do whole thing for you, okay? And you might ask me a question that so we're sequences or we can say that we're, our media is getting stored. So you can see this. This is your media location. You can even change it, okay? You can make anything like you can make a C drive either you can create your own folder or particular folder that you want to clear to give. I want to store it on e dr. D, dr. So you can select and performs certain operations OK, on that. Okay. So right now I just wanted to set it for default. Okay? So lots and lots of people are asking me a question. Where is our actual video file that we are that we want to create is getting stored. So you can see this is the path, okay? If you are having any problem, you can just browse it and you just need to copy this and you reach to this position. Ok. So I just need to click on this, okay? Okay, just set it up by default and just click on this button. Okay? And it will take some time to set up your whole setup, okay? It will take some time, okay? Because it will take some performance. And you can see these guys how it actually looks like, okay, this is our dashboard. So you can see this guy is, there are lots and lots of things you can see that will help you to generate this. You can see this sequence program. These are the clips that we need to this media that I need to import. Okay? So right now I just need to import particular media, okay? I just need to double-click on this, okay? You just need to click on this, double-click on this, and you can find out any document that you want and document or any media. I just need to show you some media. Ok. This is a particular media that I've got I want to import. You can see this. So you can see these guys, okay. You can see this if you just hover over it and you can see this, how cool it is for what Adobe will give you if you just scroll it and you can see this, again, able to control okay, that how the eclipse look like, okay. So it's the best thing that you can do, Okay? Now, I just need to import it. You can see this is, these are certain tools that I can see later on, okay, right now we just need to see the sequence. Ok? So I just need to foster deleted, okay? And I want to show you something. So what do you need to do first is to just come up here in this file, okay, in the file, just click on this new, okay. And you can see this sequence and the shortcut is Control or Command Plus in. Okay? So just click on this and you can see this guy is that if you are having DSLR or video type, okay? Whatever you are shooting on, depends upon particular camera, okay. There are a particular dependent file. Okay? So you can see this, whatever you can see, digital DSLR, okay? What is the 1-0-0 p 720 db. Ok, this is a particular file and you can see this frame rate, okay, with respective to frame rate. Okay, what is a frame rate if you are shooting? Video quality 1-0 ATP, okay, if it is for ATP, what is a frame size? Again? So we don't need to do anything, okay? We don't need to do anything regarding this thing. This thing is automatically done by your Adobe. Okay? So you do not have to worry about these kinds of small, small things. Okay? So users need to cancel it, OK. And what do you need to do is to again import data file, okay, so this is my file, okay? Sir, do the import part. You can see this. And you can see and in order to import this sequence from this my timeline, Okay, how can I do it? What are the ways we can do it? First way is you just need to click on this and you just need to drag, okay? You just need to put it long and you just need to paste it here, okay? Another thing you can do is you just need to right click OK and you just need to say see new sequence from clip, okay? You just need to click on this and you can see this. My new sequences created. You can see this, OK. My new sequences created. Okay? And now you can see and hover over that Howard's look like you can see this, how you can control these images and all, okay, so you can see this, okay? And a particular thing that you can use to navigate over here, it's just like a navigation that how our actual sequence, okay, whatever things that we need to add, how it's look like, okay, so you can see this, okay? So for this video, this is it ok for the basically the intro part that we have seen, how it looks like and how it actually performed. So we'll see you in the next video. Okay, it'll then happy Premiere Pro. 3. Creating a new project with system issues in Adobe Premiere Pro: Hello Guy is. So we just begin our session with this by opening a new project where you've seen that have created the three more projects, OK. Basically, I'm not performing any modifications on this laptop of mine, but there are some professional companies laptop that I have performed on. Okay? So basically I have to create a course on this laptop for you guys. Ok. So guys, okay, okay. Till now we have discussed a lot of out, of course sings. So guys, work is basically, if you just come up here in this Adobe Premier Pro 20-20, you have seen that guy's Adobe Premier Pro 20-20, its latest version of Premiere Pro till now. Okay. So and i is before you dive deep into the, I hope whatever edition you are having compatible with, make sure guys, you are updated with the current versions. Why? Why is it so? Because guys, you all know that technology is changing rapidly and we need to update ourself rapidly and having ten years plus experience in the same domain. I am still keep on updating myself, okay, by just doing small things, what are those special skills? First, keep on revising the fundamentals that this course will offer you. Key pond, the essential tools within hand, okay, revise it guys twice and thrice are deep. And with revision guys, if you are just performing on project, it would be very easy for you to make something better out of it. Okay, so this is a particular thing that I want to discuss with you. This is one part, okay? So we just need to start our Premier Pro by just clicking new project. Or if you are currently in working with some projects and you can see the history. If you just click on it, you are projectable. Get open. If you just click on this new project, you can see this. You can give, You can give. So you can give our name for a particular project that you want to give and location that you need to give, okay? And we can say that guys, you can see this. What I bought GPU, you are using, you can see this mercury Playback Engine GPU accelerate CAL, okay? You can see based upon the GPUs you are having, basically guys, it is automatically selected by your Adobe, okay? You do not have to do it. Ok, you can see these guys their desired display format, okay? Make sure that you have selected as, as it is. Ok, or do you samples milliseconds and you can see this edge u dv. These are the certain things that needs to be displayed. Display the project items, name, and label code for all instances. If you wanted, you can check it. Otherwise. Keep it as it is. You can see some of those instances. You can see this gaze capture audio. So for the audio perspective, you can set a folder, okay, from where do you want your folders to capture the video set apart, okay? Whatever path you are creating, you just need to, need to specify. You can see this is where the project needs to be imported. We can say that, okay, this thing, you can also say that setup manually by adjusting, exporting your content that you want, okay? So explicitly if you want to make it our default setting, you can do it. Okay? So you just need to click on this OK button days. Ok. And you just need to click yes. Okay, so it will take some time that is OK to load your essential things. And basically guys, why I need to show you some of the important things that there are various issues that are happening. Guys, you can see this. There is a system issue that is happening. Guys. This is not only for those who are using Microsoft Windows, but also for Linux users. As Mac users, you do not need to worry about anything. This thing will not appeared into your platforms at any prospective, okay, this, this error is not coming, okay? But guys, for those whose drivers are not yet there on the internet, we can say that because guys have selected this course not only for those who want to master it, but for those who are having lack of resources, but want to learn it. Okay, that is, I am considering both my audience, Both my students. That is because this is an issue that is most frequent and there are lots and lots of queries based upon this that sir, we are unable to fix this issue. What should we do? You can see these guys might driver it cannot locate. Why it cannot locate because there is a GPU. Or we can say that drivers for this particular addition, G-force, okay, 940 m x. There is no drivers available on the site off an idea. Okay, whatever graphic card you are using on this. So guys, this course basically for all of those who are just facing this issue. And if you are facing the same issue, don't worry guys, I just teach you with this same issue. You do not need to worry about this perspective. Your project is not going to lose anything. You can understand individual things precisely, perfectly. Okay, don't worry with this issue with this issue in mind. I don't want you to focus on this issue. I just want to focus upon the learning that you can do with this issue. Hey guys, it's okay guys, basically lays on the system performance. It is, if you're a Mac user, it's a good, it's a good. You do not need to do anything. But if you're a Windows user guys, and the graphic card based upon the settings that you have bought. Okay, because new, new graphic cards are having many kind of additions and they are unsupported drivers for the system performance like this. That is why this issue is that. So don't worry guys, I just need to continue with this issue and I'm going to show you individual things, guys, individual things. Okay? Having this issue, I just want to show you that you can become a pro editor. Don't consider this issue. Just focus upon my concepts, my fundamentals so that I can able to guide you to the top. Okay, so we'll see you in the next video. Till then, happy Premier Pro guys. 4. Reviewing the Interface of Premiere Pro: So there is a, this is your project panel. Okay. You can say this. So I don't know about the whatever if you have done editing before. But because this project panel is something like overwhelming for you right now. Okay. But Doric, do, let me, I just wanna guaranteed you one thing is that with the end of this course, you are compatible to do whatever editing you want for your project, for creating a YouTube video, for creating any video, you are compatible for this. Ok, that's my guarantee. Ok, so now we just need to first understand that what is this? You can see the source monitor, you can see program monitor, you can see a timeline, you can see media and port. So we'll analyze the individual modules first. Ok guys, so let, let me just give you a description about this. What does media res media is what? Video and audio. Audio. Okay. Not only video or audio, but there are some effects. You guys if you have seen how Report on the magic, warned, okay. Whatever they did, whatever magic this bell there is an effect means whatever Hadi Porter is doing, okay, in order to want to leave the hog words or whatever the stuff is, okay. You have seen that these effects, these stinks, will help you to import it on your timeline. Okay, I hope you get an idea that is what actually it looks like. Ok, so we are just focusing upon the same on this side. Okay, so first of all, what we need to do, you just need to understand this, that how to import them media. So you just need to double-click on this media panel, okay? Okay. And you can import whatever media you want. A let us suppose Guys, I have imported a video. This is my video, ok? And what can I do for this video? If you just double-click on this video and you can see this guy is this video is in in this panel. Voted does you might ask me a question. This is known as source monitor. Source monitor is whatever is a media that you'll have imported. You just need to first check how it actually looks like. What part of this media you want to import it on your timeline. Okay, for creating a video, let us suppose there is a 1R video, ok? This is a 1R clip and you want only 30-minute part out of it. So for that, you can do one thing is to just cut it down for some part and you just need to import it, OK. You just need to import it on this timeline. Okay, simple enough. Simple enough. Okay. So now I'm not coming up in this program monitor. I just first come up here and this sequences, or we can say that timeline. Timeline. So basically what does timeline lays? Timeline is your basic structure of the video. Okay, is the basic structure of the video. If I want to import this media, what I can do, I just need to drag it down. Okay, I just need to drag it down and you can see this guy, this is my media. This is my media. I just need to drag it down. Okay. So you can see this guys. I just needed to see. So you can see a small rectangular box in purple. So it doesn't look like a video. It just like a rectangular box. How can I identify it pictorially? Don't worry, guys, I just do one thing, you know it I just need to create upwards and now you can see the thumbnail. Ok. Guys, don't worry, I just gave you an overlook. You can say that a feel of it, how the course will begin, ok, so that you make your shoes compatible with me. Okay, I just gave you a 100 examples of production, whether it is a movie production, whether it is of audio production. We will see each and every part. June detail. Okay. Don't worry, guys. I just want to show you that this is a particular video. You can see this guy, there's a particular clip. Okay? The timeline is a structure. And that is now we come up here in this program monitor. This program monitor is the pictorial representation of our timeline that whatever we have created, it will help us to visualize it from starting to ending. From starting to ending, okay? If I just copy paste this thing, okay, you can see this. If I just copy this, okay, and just paste it again. You can see this guys, how it actually looks like. You can see this OK. How it you can see this 16 minute. Okay. I have extended it, but it is not extended because it is a source monitor gaze. It will gave you description about the media. Let us suppose you are having and having a picture eigenstate that I'm having a pitcher, certain set of pitches. Let us suppose this is my picture guys. You can see, if you just double-click on it, you can see this. Ok. This is a source monitor. How exactly on media look like. Okay, if I want to add some media after it, how, what type of media I look like I find need a part of it. This is a source monitor, helps me to import it. Okay. Source program monitor Help me to visualize the structure how actually it is. Okay? So this is a basic glimpse. You can see this guys, there are various kind of four options, editing options, color effects or D0. And if you are unable to find these kind of things, guys, what do you do? You just come up here in this window panel and you can see this workspace and you can switch between them. If by default this panel is not there, you can switch between them, guys. Okay. Do not need to worry about anything. Okay. You do not need to worry about anything. All of the options are available here. And if you are facing any problem with this visualization or any kind of settings guys, you can select or selected or make sure that it should be selected while in your monitor, it might happen that it is de-selected, okay. So you can switch it and this is a tool panel guys. Let us suppose Eraser tool, I just need to cut this pig down. Ok, let us suppose I just need to cut it. So I, I have cluttered and I have to remove this scattered part apart and I just need to delete it so I can do, this is my tools panel. You can see this, this is my tools panel. This is my settings option, okay? And various kinds of options which we will discuss in detail in this course. I just need to give you a glimpse, a feel of it, how we begin our discussion. I hope you like this video guys. Okay, so we'll see you in the next videos, guys, tail then, happy Premier Pro guys. 5. Marking Clips in Source Monitor in Adobe Premiere Pro: So hello guys. So now we'll see how we can mark the clips in OK, in this editor. Okay, so I just need to import media file, okay? I just want to show you, you just need to import it. Okay? So this is my media file, okay? So I just need to double-click on this, okay? And you can see this. This is the editor section where we can see our clip, okay? If I just drag it, you can see this. You just need to hover over your mouse here and you just need to drive it to the right hand side. And same. Similarly drag it to duck martin. Ok. So you can see this case. You can see this. This is my clip. So you can see this if I just click on this button, this is automatically running. Okay? So what it is all about, okay, what it is all about, how we can photo becoming a probe editor, okay? What do we need to do first? Okay, you can see that this is a particular clip. I just need to edit it, okay? So I just want to show you three keys, okay, J, K, and L. Okay, these are the three keys. What are they? J, K, and L. You can see this on your keyboard. Ok. You can see this just with your three fingers on j, k, And so k is for pause. Okay? K is four paws. L is for forward, okay? If I just press l, you can see this. If you just click one l button, you can see this. The clip is going forward, okay? If I double-click on, okay, if I just again click on OK. You can see this. It is moving fast forward, okay? If I need to pause it, I just need to press k. So k is four paws. And now you can judge what it is for J. If I just press GA, so the clip is moving backwards, you can see that if I just again click on j, you can see this. It will increase the rate of frames per second. Okay? I'm with k, I just need to stop and pause. Okay. You can see this, OK. You can do it manually guys. Okay, just try out, okay, these three gains. Okay? Now, for a pro editor, each video consists of many kinds of frames. Okay? A video consists of many kinds of frames. You can see this, there are various kinds of frames. A set of frames, a set of frames will make particular video. Okay? We all know this thing, but how to traverse, or we can say that how to go frame by frame, if I want to do a modification on next frame of this, okay. How can I reach, okay, one way is to just click on this button, okay, you can see this step forward, one frame to the right-hand side. You can see this. You can see this. This is my another frame, okay? If I just again delegate, it's another frame. Okay? So if I do it with keyboard shortcut, you just need to press k. And you just need to press long gay and just click on this button. Okay, you can see this, but a sin kx and just pressing l button, you can see this. You can see this. How we can reach to each frame. Just click on this. You can see this. I have just press k and just clicking OK, clicking which frame I Just Want. You can see this. Which frame I just need to go to. You can see this. Okay? If I just press both the keys k and l long press k and l. You can see this, the video start to move. You can see this how it is moving in a slow motion. You can see this, the video start to move in a slow motion. So what we want to infer from this, that by pressing Qi rises, by pressing kay, and just clicking l, you can reach to any frame you want, okay? If I just long press both the keys, I can go to slow motion. You can see this is the clip is moving with slow motion. Similarly, similarly with j. But if I just press long for k, and if I just click on j, you can see this. I can move each frame backward. You can see this, okay? I can move each frame backward if I just long press both PNG. You can see this, how it looks like. Ok, Howard looks like. So you should have a command on these three keyboard shortcuts, guys, it's very important because in order to meet pro editor, you just need to learn these shortcut tricks. Glitches are very important for you to do a pro editor, okay, if you want to become master in this Adobe Premier Pro, you need to understand these keyboard shortcuts. Okay? This is one part, okay? If I just want a particular portion from this video, okay? This is a video. Okay. What you can see this, how many seconds it is off? 59 seconds we do. If I just want a small portion from this from this video, how can I do it? So for that day is what you can do. You just need to mark in this clipping. How can I mark this? So press IY button, guys. Ok, press IY button if you want to mark it. Okay? So let us suppose pressing k and l, you can see this. I want to market at a particular frame. Let us suppose this is my particular frame, okay? So I just need to press a button. What I need to press guys, I button to press IY button. Okay. And you can see this this is a clip that I've warned initiated start point of a clip that I want. Ok. And I can go on and on. Okay. I can go on and on wherever I want. So let us suppose I want 28 seconds. Okay. So what I need to press now in order to cut it rests oh, button. Okay. What do you need to press? Press o button if I just press. So you can see this, this is my particular clip, okay, you can see this, this is my particular clip that I want to extract from this whole period you, okay, if I go to the initial initial point, you just need to press Shift plus i. Okay. Shift plus i. K. What do you need to press Shift plus i? Or you can see this, whatever shortcut you can see this go to the you can see this. Ok. You can do it manually. Okay. I just clicking on these buttons. But as a pro editor, I want you to do it with keyboards guys. Keyboard inherent shortcuts are very important because in order to make it compatible, in order to know the fundamental concepts, these things should be done first. Okay, I hope you get this point. Okay? And so this is a basic part guys that I want, okay? And you can even are dragged this clip and import it wherever you want, okay? If I just want this part, okay, if I just want thirty-seconds of this part, so you can even drag this particular 22nd North 30-second portion. Okay, you can see this. Okay. So this is a basic part dies, which is meant for your, we can say that making a clip from a particular, or we can say that section from a particular video. Okay, these keyboard shortcuts for you can see this content. I burn and Mark out overdone, okay, Martin, and mark out, you just need to specify these shortcuts. Ok guys. So we'll see you in the next l Then. Happy Premier Pro. 6. Marking Clips in Project Panel in Adobe Premiere Pro: In the previous video, we have seen that how we have clubbed this apart. You can see this clip, this OK. This is our source preserved, okay. One we often doing it. Okay, on the media file. You can do it. Okay. You can see this on the project panel. You can also do it. Ok. All we can do it. I'll just show you. So for that, what do you need to do is to just come up here, okay, make sure that this box should be selected. We'll get this box should be selected. And guys, I just want you to press their territory button. Okay, how tilde looks like I just showed you. Where does again, This is our territory button. You can see this editor button. Okay, wait a second. This is our turn to button. You can see this, okay. Deserted button or you can see this apostrophe. Apostrophe or do the inverse apostrophe. Or we can say that terrorist saying, okay, so what do you need to do, guys? Just first select this and then press the button, okay? If I just press it, you can see this. This is expanded. Okay? Again, you press it, it has minimized presser. And again, ok. This is how it looks like. Okay. So I just need to show you something. So this is my, you can say that project panel where all our media is important. So you can see this. At the bottom. You can see this current switch to this icon button. Ok. And here you can see this. I can control the sighs, Okay. Well, if I want to clip, okay, if I want to clip, you can see this base, I can clip on this. You just need to select it, okay? And you can even edit whatever we did, just your n, you can see this n, k, and m. Okay, you can use this for your editing. You can use it for your editing. So how are we gonna do it? Okay, so what do you need to do, guys? Just tell users need to press. I just need to select it coast, okay. And just JK. And you can see this guy is how it is actually moving. Ok, and for a clipping, what I can do I4, Martin and O4 mark out, okay? And the important, the selection is done, okay, the marking is done based upon this. So try it out, guys. Okay, this is another way that we can do. We can perform remarking or because there is you cannot select individual media. And what happens is guys, if you are having, working with big projects, okay? You want to do the marketing part, okay? That is why I am going to tell you that is why I'm going to tell you these shortcuts because there is, there are multiple clicks. Let us suppose 11 clip ends this second, third, 456, again, the big projects. In the big project, these keyboard shortcuts are very important. That is why I want you to remember this, have a command on this so that you can able to handle big projects as well. Because these are the fundamental concept is if you can able to grab the controls of the software, everything would be easy. You can became pero editor, okay, you can see this Adobe Premier Pro, then you can became your name with Dart that I am a pro, Adobe Premiere Pro editor. Okay. So just mark it out. Okay, just follow my instruction. That is the key feature. We can make it out and became a pro editor. Okay, so we will see you in the next video. Till then, happy premiere. 7. Creating Subclips in Adobe Premiere Pro: So we have seen how we can do the clipping part on project panel. Okay? So now we will see that if I want to make some clips, okay, how we can create some clips. So that is what you can do. What you can do, you can select a region, okay? You can select a particular reason. Let us suppose I wanted OK, if I just press on this button, okay, and just press on L button, you can see this, this is a particular region that I want. Okay? This is a particular region that I want. And what can I do? I just make a sub clip of this and I don't want but you can see that mediocre lesion. Okay. I don't want this region. You can see this. I don't want this region. So let us suppose I don't want to. We can say that press k ok Tilden, between this point and this point. I don't want this part. Ok. So for that, what can I do? I mix up clips. Okay, so for that day's, users need to mark this 22 dot 16 seconds, okay? Okay, so this is a particular part. First, I just need to make a sub clips of it. Okay, how can I make it? So first I meet this and the rest that I want. Okay, so for that, what do you need to do? You just need to select this and just come up here in this clip button. Okay? You just need to click on this clip, okay? Now you just need to select, you can see this mix up clips and you just need to name it. Nice. Okay? So I can give robot AP clip and the school, I can give robots eclipse zeros 01. Okay. And there is you can see this there is a button which is known as a restrict trim Stu Sutcliffe boundaries what it means, what it actually means. Basically guys, if you want a transition like you weren't in after effects, if you want, OK, if I want a smooth transition, okay. I don't want to restrict it, but that is depends upon particular situations. You can restrict the trims because it's restricting, won't let you go. The other part as well. Okay? The smooth function that you want is not there in case of restriction. Ok, sort depends upon particular situation and particular projects. You can do the trimming part. Okay. You can do the trimming part. So for my case, I don't want this to restrict part to be compatible for meat. So I just drew or de-selected and just click on this, okay? Okay, and you can see these guys, there is a different icon. You can see this. You can, there is a different icon off sub clip, okay? You can see this. There is a different icons or subclass. Okay? Good, nice. Now, if I want to and make, what point is 22016? Okay? This is a particular point that we can see. Ok. We can select it with j and you can see this. Okay, if you are having Gertrude, you can able to manage it. Just press on this button, okay? And just click on this. Let us suppose I want up till this, OK, press overdone. Okay, so you can see this guy is mediocre part. I can leave it and I just make it as a sub clip. Okay? So you can make a sub clip. Just click on this mixup clip, okay? And you can give a nice name. Abort underscore sub clip 00 to and just click on this OK button. You can see in this case, okay, if I, if I want to make a transitions of a particular sub clip, okay? If there is some, we can say that if there is some mistakes that we'd do while shooting, we can do via making videos, photography's, whatever we are doing. We can make some clips of it and take a particular portion, okay, whatever particular moment we can create and we can make that particular moment to a particular. We can say that particular video series for complex projects, guys, it is very important because on the basis of sub clips, on the basis of particular shoot, okay, d sub clips are very important, okay? If you have seen the means, okay, means for a particular editing, for a particular pro editing by just synchronizing some songs with a particular dialogues. These sub clips are very important ways, okay? From my experience, I just want to tell you that if you just walk along with my part guys, you will definitely became pro Adobe Premier Pro editor. Okay. So till then dies. Just happy. Premier Pro. 8. Building a Sequence in Adobe Premiere Pro: So in the previous video, we have seen how we can create sub clips. You can see this, we have created this and this. Okay? So v r. Now what we are going to do is to just make this sequence, okay? You can see this. This is our sequence panel. You can see this if I just want to create a sequence of these clips, okay, these sub clips, that particular portion from this to this, and particular portion from this to this. We're good how I can create it. So for that there is a, there are two techniques. You just need to select it. Just press if there are multiple sequence, you just need to select Control or Command on Mac, okay? Just select it and click it, okay? And just need to drag this. Okay, you just need to drag this. Wait a second. I just selected. And if I just drag it, you can see this. And you just need to create a click on this. You can see this. Create new sequence icon. And just to need to release the button, okay? And you can see this guys, this is your particular sequence. You can see this, this is your particular sequence. You can see this subsequence 1001 and subsequent 00 to okay. You can see this, OK. This is how it has been created. Okay? So in order to do some modifications on this sequence, you can do it by just come up here in this sequence and you just need to do some modifications on this sequence panel, okay? For the high level, I just want to show you that you can perform some modifications on this panel based upon your, if you want to modify some settings. So good for bread project is very important, okay? For her to do some customization. So this is the sequence settings where you can perform those things. Okay? So you can see this sequence has been created. So you can see this particular clip, and I don't want that particular clip, okay. So you can see these guys how it actually looks like, okay, which is our final output. Here we can create a final output. So this is how we can reiterate. Okay, this is what you can do the selection mode. So we'll see you in the next video. Till then. Happy Adobe Premier Pro. 9. Adding Clips using Insert Edit in sequence in Adobe Premiere Pro: Whereas in the previous video we have seen how we have created this eclipse, okay, for doing some editing and for creating a sequence, I have shown you how to create a sequence. Ok, so now guys, what we need to do right now, I've added two more clips, okay? So guys, you have created a sequence, okay? You have created a sequence. You can see this, this is, this is my sequence. You can see this, this is my sequent. If I just want to add the particular clip, okay, let us suppose this is a Sutcliffe 001 and this is us eclipse 002. Ok. And if I want to add an intro part or a video, which is needs to be updated on the on the French side. Okay? So this is a particular, we can say that scene of a movie, okay, we, we are creating our animated movie. So this is a particular scene of a movie. Okay, so if I want to add a trailer or something on the other, a particular part, how can I add it? How can I add it? How can I insert it? So for that, what do you need to do? I have just taken this thing. Okay. So this is a particular clip guys, okay. Which I want or to insert. Ok. So for that day is I just need to just make sure that you have selected this OK. And you just need to, you can see this inserted. You can press the button, you can see this. You can press the button to insert it. You just need to click on this and make sure that there is this cursor. It needs to be selected, okay, you can perform gays in the, in your keyboard there is up key and down key. You can see this. You can control this slit that you have created. Okay? Or this slits, you can create it up and down. Ok, you can create it. So for that grace, if you just click on this left hand writing and see this grace, I can hover over to a particular frame. But up and down will make you to transit from clips, friend of the clips to clips. You can see this okay, between the slits. So if I wanted to insert it in the beginning, I just need to press comma burden or you can click on this button. You can see this insert. So if I just click on this, you can see this. My clip is getting inserted. Okay, my clip is getting inserted. You can see this. Okay? You can see this. Now you can add various kind of thing. You can see this is a particular trailer of my movie. And you can see this, this is the rest of the movie that I want. Ok. One more thing. That is one more thing. What if, what if, if I don't want this particular movie scene? Okay? If I want a particular transition, let us suppose Guys, let us suppose if I just hover over, you can see this l, okay? I want from this part and this part, okay? I want this led to be inserted. How can I do it? Similarly, guys, Similarly, you can just delete it. Okay? And I just need to just need to press the Control Z part, okay. Weighs I just need to press the Control Z part. Okay. And I want to show you again, okay, how it actually looks like. So this is my butt. Okay? So this is my particular thing and I just want to show you this. So this is my part that, that I want. Okay? This is the particular part that I want. So similarly days you just need to insert it. You can see this. I'll just inserted successfully. Ok. So this particular section, you can also include it in your mean. We can say that means sequence. There is no need to create some clips for this, okay? You can do it in this fashion has been sub clips. Why we need to create a sub list, because we do not do this particular editing. We don't want to remember that what scene we wanted. Okay, for a particular trailer video UK, you need to create some clips. Okay? You need to create particulars of clips. And for doing the pro editing that is, in order to create means pages, okay? Nor to translate some dialogues part, okay? These are the concepts that are very important for you to understand this concept. So there's a basic part that you can see and you can look forward. You can see this, how it actually looks like. Okay? So I hope you are, you get this point is, and there is, you can insert it. Any point. You can see this if I want to insert it in this slit, okay, in this slit, I can do it in that way. You can see this. You can insert it. You can see this. I have inserted successfully in this middle. Okay? You can perform this operation and that, this is basically act in a particular clip inside this sequence. I hope you get a brief intro about it. L Then happy Premier Pro. 10. Moving the Clips around the sequence in Adobe Premiere Pro: In the previous video, we have seen how we can do some modification on some sequences. Okay, how to add a sequence, how to merge a particular clip from sequence into a sequence. Okay, we have seen these kinds of things. Now, there is two things I just want to make it clear. First is you can see this, this is a sequence name, okay? If you want to rename the sequence, what you can do, you can see this, there is a green button. You can see this is your sequence, okay? This is your sequence, modified sequence. This is your modified sequence. So you just need to double-click on this and you can see this grace. You can give whatever name you want. Okay. I can give movie. Okay. I can give movie. You can see this. Now it's look fine. Okay, this is your final output name. Okay, you can rename the later stages, but I just want to make it clear. We'll get how you can rename your sequence. Okay? This is one part. Ok, now that perspective in this video, I'm going to show you that how we can transform one video clip to another video clip. Okay, so what is, let us suppose, let us imagine a scenario where we, by default, there is a huge sequence that we have created, ok? There is a huge sequence that we have created, okay, complex project which we are working upon, ok, there is a complex widget that we want to walk upon. So and that complex project guys, I just want this part, ok, this part to be merged in the middle of that complex project. Okay, how can I do it? So for that day's, I just want to show you this that if I want to merge, what I can do, I just need to drag it and just paste it on the slit or on the slot where I just want to add it. Just see the thing. What happens if I just click on this or Drag button, ok, so this is my clip. So if I just click on this Drag button and press it long, and I just come up here in this slit. And just to release the button, you can see in this case what happens race. The previous. We can say that the previous clip is getting overlapped, or we can say that is erased by this clip and it is submerged. This is not we want we want this to come up here and the middle. And a clip that is erased should be at the back. Okay, we want that. So just press Control or Command Z. Okay? So what do you need to do, guys four, that makes sure dice. This Snap button is selected. If it is de-selected, It is in the gray box. Okay. Make sure this blue button is there. Okay. So what do you need to do, guys is to just long press the control button and click on this Drag button. And you can see this guy is, the icon is changed and just need to release the button. And you can see these guys are transition is a Christmas. This is what we want. Okay? This is what we want. If I if I just come up here, makes sure this button is selected Snap button, and in order to relocate a particular clip, makes sure that you press the control button. Otherwise guys, what it will do, it will erase the part, or we can say that submerge apart. Okay? This is the most important thing that you need to do, okay? Another thing that is what you can do. If there is a particular clip, you can just import it here and just drag it. Ok. You can see this by just pressing control. You can see the icon, okay, Now you can relocate it. You can see this if I want to import it, you can see this is how we can do it, controls your commanding. To make it back. It is, this is the most important thing that you need to know. Okay, remember, ok, l then, what do we say that? Happy Adobe Premier Pro. 11. Targeting Destinations in the timeline in Adobe Premiere Pro: So hi guys. So one more thing, just, I just need to give you a particular thing is, okay. Now let's see if I just want to import an audio file. Okay, so this is an audio file gaze, okay, there's a famous song. Okay. Cinematic zone. Okay, if you have seen this, okay. There's a particular song, guys. So I just need to mute it. Okay. So this is how particular song is, again, non corporate. Okay. I don't want it to be displayed, okay, right now, I just need to, let us suppose we'll talk about this slit in the latter section. Ok. We'll talk about, I just need to show you something. Okay? So guys, if I've wanted to add OK, if I want to add a clip, okay, if I want to add my clip TO particular designation, ok, let us suppose I want to add it here. Okay? So what can I do? So let us suppose this is a particular section that I want to insert. So what I can do is to just press this Insert button. And you can see this gaze, what happens actually. But this isn't what we want. So for that, what you can do, okay? If I want to target for a particular designation, OK, if I want to target it for a particular designation, we can set our delimiter for that. Just press on this command and control, and just press on this okay, down button, what it is. For a button how it looks like, and for down button how it looks like. Okay, so I just want to add it. So I just press IY button. Ok. So it will give you a designation. And no matter though, guys, no matter how this cursor is, where, wherever the cursor is, whether it is here or here or here, it will insert it at a particular designation. It will insert it at a particular designation. This is known as targeting our designation in to the sequence. Ok. I just press IY button, okay, wherever I just need to put. Okay, this is our delimiter that will help you to target, okay? That this will, because there is in the editing, okay, this sequence, this, you can say that this marker, we can see that it is wherever it is, okay? If I want to insert it at a particular location, it will help me to achieve this, okay, if I just want to end it and insert a clip at the end, okay, but the mouse's here. Okay, what can I do? The whole procedure is getting registered. So in order to do the targeting part, this Ibadan will help you if i just now clip it and you can see this interval inserted at the target location. So this is now targeting point guys, very important conserved as per your sequencing is concerned because in many projects that targeting of clips, particular clips, we need to, when we are coming up with the insertion of the after-effects. Ok. Very important concept for Arthur After Effects for a targeted designation, because in effect, the designation should be needed. Okay, for that, this IY button is very important. I want you guys to do some practice on that part, okay? So that you will getting Understand the stopping, the targeting. Okay, more. And I want you guys to have some fun with these kinds of clips, sequences so that you will getting generated insights like how things work. Okay, so we'll see you in the next video, guys, tail then. Happy Premier Pro. 12. Splitting and Deleting the Clips in Adobe Premiere Pro: So guys, one more thing that I just want to show you is that if I just want to see the outer structure, if you have walked upon different kind of editing softwares like Camtasia or filled Muda will give o, the clips are visible. You might ask me a question that said, these clips are actually not visible though. Thumbnails that they will show you. Just wait for a second days. I'll show you how the are going to be going to get with them. Okay? So for dark days, this is a particular sequence. Ok? So what do you need to do is to just drag it up and you can see this. Ok, Howard actually looks like similar for the case with this audio button. Just pull it down. Okay? And you can see this place how it actually looks like, okay? You can see this, how the same manner that we can control. And you can see this, how we can control and manage. You can see this, the channels. You have seen this, these kind of things that we did in Camtasia and in full Mura gave you want to increase and degrees of sound and noise. Okay. We can do it in this manner as well. Okay. So I just wanted to restore one more way of doing it is you can control in this fashion as well ways. Okay? You can control in this fashion. And if you want to change these thumbnails ways, you can do it either wheels. So what do you need to do? You can see this sandwich are type, okay, after the name of this sequence. So you just need to click on this and you can able to control that, that what type of thumbnails you can select for this. You can see this video, head and tail, continents video thumbnails. So for the art, and see that the thumbnails are getting changed rapidly. So these are the thumbnails that you can act a as per a particular modifications if you want to do, okay, if you want to do a pro, everything good. These are, these kind of things are very important when you are doing it in a right wing and right fashion. Okay? So these are the things that you need to understand first, okay? So I just want to show you that there's a way how you can manage it, okay. Low parties for audio and video. So you can see this OK. Right now or does okay. Now it's good. Okay. Okay. I just set it to normal guys. Okay. I just need to set it to normal. Again. See this native search it to normal. You can see, oh, yes. So this is a perfect view. You can see this is a perfect view. Okay? This is one thing. Okay? So you have seen that while creating a sub clips, okay. While creating some clips. Okay. We have seen that there is a restricted okay. Now that comes a Plea. If you want to add some Bart or we won't do a read some part if we have checked dark thing. Okay. I'll just show you first that how it actually looks like. Okay. This is my how we need to make a sub clip. Okay? So you can see this, restrict them trim. Ok. If I have restricted this trim, then I cannot do the crop part. So what is the crop part? So you can see this, you can see there, there is a red colored icon that has appeared. So I can increase or decrease. Or we can say that the data of the original clip, you can see this. I can decrease it. Okay? Or I can increase it further. Okay. You can see this. I can increase it further. You can see this. Okay? So this is the most important thing of restricting their trim and not restricting their dream. Okay, I hope you get an idea guy that does via each and every video is linked to other, other, each other. I hope you get a point, guys. Ok, follow along this video, guys, lords and lots of things, you will get it. Okay. If you have not watched my Photoshop Corps guys, just do check it out if you've wanted to became approve Photoshop designer, OK. You can check out on my courses. Okay, so for this basic thing, go for guys. How you can do it. The crop part, okay? I hope you get this idea. I hope we'll get varies. So so now this is it for this video guys. Okay, in the next video, we'll see some more on this time sequence and all. Okay, they'll then happy premium proved. 13. Top and Tail Editing in Adobe Premiere Pro: So guys, in the previous videos, I've shown you a slit tool. Okay, you didn't see this. That is our total begins here that the short key is see, okay, if I just click on the C button on, I just click on this. So c is a slit part ways. Let us suppose in movie, watching the sequence, OK. You can watch it here, okay, whatever. Editing and adding more of the eclipse and making a full trailer, we can do it in here. Okay. And I don't want to I don't want to, I don't like this part. Okay. This metal part, let us suppose from this part to this part. Ok, so I can cut it with this razor tool. Okay, and answer to what it will do rise. It will slit, it will cut a particular part, ok, so that either you can do the editing, okay? Either you want to delete it or you can insert it. Okay, so razor to list handy. And there's a residual part. Okay, It's very simple guys. Again, anyone can do and in firm want to switch to this selection tool. So a short e is V. Ok. So if I want to delete it, so what you can do, just select it and just press delete or DAC button. Whatever it is, delete all back button, it will get automatically deleted. But guys, if you are, if you want to delete a particular part, okay? And if you want the whole part to be automatically come into this slit, ok, so that there is no distortion. What can I do? I just need to Control Z and I just need to click on this. Okay? And you can see this, there is an option repelled delete. So just click on this and you can see this. The portion is deleted and the rest of the clips are getting sequenced. What we what we did. I just need to select it. Repaired lead. And that's it. No need to do the modification. Otherwise, we just need to delete it and then selected. And if you have not selected this control to Lord a particular tool, it will get distorted. Okay, so simple thing is selected and just repair delete. We'll see you in the next section. We'll then have been Premier Pro. 14. Track Targeting and Sync Lock in Adobe Premiere Pro: So hello guys. Now we will looking at UW important or tools. First, here's your toggle clock and another is your targets and clock. Okay? We'll see their differences. I'm Vc the essential features of using it because we are going to understand the basics of this locking part. Targeting you can, you have seen this, what is their targeting issues? Ok. So let us suppose where the law comes into the play. Ok. So let us suppose you are narrating something. Ok? So this is your generation part that you want to insert in the middle of. Let us suppose here you want to insert OK, here you want to insert. How can you do it? How can you do it? Okay? And these are the music tracks that will continuously, you know, you want to be running, okay, keep on running. So for that guys, for that, what do you can do is to just first copy this thing. Okay? What do you need to do? Copy this thing. So how to copy either you right-click ordered or Control C or Command C and just pasted here. So as I've already told you, it is not copy listing the things it will what it will do. It will overlap the existing one and that's what we want. Okay, so what I can do, I just need to press Control Z, okay. And I just need to target was or do's. Okay, I just need to target those audios. So for that, what I need to do here, I need to put, so what I can do is to just target this and did this. And then I can insert it now. Okay, this is one approach of inserting, but, But there is, we don't want this clip. Okay, we don't want this clip. And in the situations where you need to insert a clip, vet an audio with some narration, ok. example. That is if you are just making something understanding, okay? Basically, if you want to insert the clip also past event as, as of now if you are in some productions or so, if you want to insert some of the stinks or some past 20 years ago, 30 years ago. And from Dart, what can what you can do? And you want to preserve this clip as well. Okay, so for dart Do we can use another thing we're gonna do is we just need to deselect it. And what we need to do is I just need to prove congruency. If I want to inserted here. So what you can do, just come up here and decelerate and just click on this base and insert OK. And you can see this guy is how things work, okay? How did things work? It will, what it will do. It will insert this clip with this or do. But guys, we don't want this. Okay. We don't want this for that. What we can do, i have told you that these music should be run in parallel. Okay, for that, what you can do this press Control Z. And for dark days, you just need to lock it with it. You just need to log these two things. And now you just need to press, Paste in insert. Now you can see this grace and this is what we want. Synchronization is done, okay? But these two layers are loke, okay? Okay, it will deselect the synchronization, okay? And you can see this guy is, it will insert it and nourishing part and the background music is as per intended. Okay? So this is one part that you need to understand. Who give other part. You can do it by use case off your log button. Okay? Another thing you can user guys, synchronization. So if I just inserted, there is the same thing, a writ and just press this. Okay. If I just inserted why it is inserting in the middle is because it has doing the synchronization part. I just de-select the synchronization base. I can achieve that results. Okay, so for that, what you can do control Z, okay, I just need to desynchronize it. So that guy is whatever insertion is happening. Okay? Whatever insertion is happening, it will T allowed this, these two tracks to synchronize, okay, in Berlin, insertion and parallel, it will disallow it. So what are you going to do? This kind of things. You can see this gauge. This is what we weren't. Okay? It will don't allow you the synchronization. Most important thing that you need to understand first, okay? So I hope you get an idea that is how things work, okay? How we need to deselect the synchronization and all, ok, how do things actually works? Okay? So this is one part and I hope you get an idea that how do inserted either you can use the log part, okay, and just targeted or target those things. Or else you can do the synchronization by them based upon the things that you need to do. Guys, I hope you get this one day's forget. L then what we say that day's happy Premier Pro. 15. Overwrite Edits and adding blank spacing in Adobe Premiere Pro: Hello guys. So now we're going to perform the overwrite function days and we'll see how we can add the bland spacing inside this video settings. Okay? So there is for that what you need to do first, okay? You just come up here and we have seen that if you want to copy something on one side, on the other, what type of functions we are performing. Okay? So basically this is a video clip you can see, and we just need to make sure that you need to target this thing, right? Okay. And let us suppose this is a particular video. You can see that I want to insert it at this point. Okay. Make sure I just need to insert. Not to insert, but to override that while performing something. Okay. I am giving a background detail or a bad groaned explanation or the bug. And for that background explanation, I need to visualize. And for that what I can do, let us suppose this is a machine. So inside the machine I'm going to tell you by doing some narrations. So for that, I just need to show it okay. With throughout my audio. Ok, throughout my ordeal, I just need to mention distinct. So what can I do gays in that case, you just need to overwrite this. Ok, so what, what is a keyboard shortcut? Is this? Make sure that you have selected this. And for this you can see this dot. So just click on this and you can see there's guys, your reduce concern. But the thing is, it is preserved. That thing, ok. It will preserve your audio and visual. Ok. So what, what it is? Let us suppose it is performing some operations. You can see this, this clip. And here I'm just going to tell some other details what happens inside this machine. So for that you can see this. I just want to give these nano explanation like this. It is made above this material. This material Howard actually performs. Ok. Again, I just start the whole process. Ok. You can see in this case, this is known as override methods. Ok? So let us suppose this. I don't want to overwrite, I just need to insert a particular. We can say that I just need to insert a blank space inserted. So for that, what can I do? So you just need to hold down your Alt key or the Option key on Mac and just click on this. And you can see this guy as you can see the blog Black Box. And then if I just say what I rating, you can see this guy seems as black boxes appeared. Samhsa is blind box is appeared. You can see this, okay, which we want. So this is what we want to. I hope you get this idea. Ok. So there's a particular thing that I want to show you guys, OK, which is very important for you to do the visualization if you want to become a pro editor, these kind of basics you should need to Revised, Okay, so we'll see you in the next video, guys. Happy Premiere Pro. 16. Perform 3-Point Edits in Adobe Premiere Pro: So guys, now we are going to show some of the techniques like three-point editing. Ok? So what is three-point editing means? Ok. So let us suppose there is, I just want to insert a particular clip. So make sure that you have selected this, okay? And if I want to insert a particular area, let us suppose I just need to print, press I, okay, I button. Ok. So this is your point and make sure that you need to select your outgoing does win. So O4 out point. So you can see this, this is a 3. Wait a second. Okay, you can see this, this is my particular section. From there. I just need to insert, OK. I just need to, we can say that override for that guys. What do you do? Let us suppose that this is a particular clip that I want. Okay? This is a particular color. You can see this and I just need to override it. You can see the size over time and you can see how much it is 3s again, so we can see this the same. So if I want to take you, you know, you're gonna take whatever length of it, okay, you can see that Eigen Jews, whatever is the length of this particular window is. So let us suppose this is my 2.8, we can say, okay, this is a size, okay? Yes. So if I want to insert it, you can see this. It will fit perfectly. Ok. How? Because 3 to it and 3.28 the size, okay? But this is known as a three-point editing, but it might happen that is that the frame size, okay, in a particular frame size, I want to insert a length which is having less number of frames as compared to this. So let me just give you a description like this is my particular frame, 3.2828. And I just need to want to insert 2.24, okay? But this particular search I am having, so if I want to insert it here, what type of ten it will take? So if I just try to override it, you can see these guys, it will pop up os more box that either, either you can change the clip speed, ok, now it will make it more slower so that it will reach to 3.2 it when did okay. Or ignore the endpoint, ignore the source point. Or we can see in sequence or out sequence, we can select whatever it is. Ok? So let us suppose this is my thing, okay? So it will doing some slow, slow motion part, okay? You can see as compared to other things, it will do the slow motion parts. Okay? So this is a particular thing that is OK. This is a particular thing that I want to show you. Okay? Next thing that you can do that is either you can select it, ok, you, you want that, the thing, whatever it is doing, okay, in that frame. It should start with this particular frame. And no matter how much frames it will take, you don't care about it. You just need to want that for a particular frame, this, it should take a initial value from this side, okay? Not just focusing on one clear in, sorry, this endpoint, ok. And you do not want the out point ok. So for that, what do you need to do is to clear out point, okay? So if I just need to override it, you can see these guys, it will take automatically from this point to ultimately the size of the frame. Okay. Another situation that you need to that I wanted to show you guys is that I just need to clear in point. Okay. Here's the booze. This is a link point, okay. This is an initial stage. Ok. This is the initial state of the fees. And I've warned that. Let us suppose this is the initial state and VoiceOver is happening at a, at the back cookie. So the clip is moving like this, ten distinct, distinct, and it will ends here. Ok. So for that, what you need to do guys, make sure that what is the ending point. And you just need to click on this out points. So you just need to click oh, ok. So it might happen that a clip should be entered in this point. So what do you need to do is to just overrated, so whatever it is, so it will just in this particular frame. So from this, starting at this point, this and this, and it will take the, you can see this, the front part as per the size of the frame. Okay? So these are certain techniques. We can say that three-point editing, this is an honest three-point editing. Various kinds of people are asking me this question. This is an illness three-point editing. I hope you get an insight offered that work-based exactly three-point editing is okay. I hope you get an idea of is OK, but it see you in the next video. Till then, happy Premier Pro. 17. Ripple Edit Tool and Rolling Edit Tool in Adobe Premiere Pro: Hello guys, what's up? So in this video we are going to see two types of tool, okay? You can see this first as your reporting tool, okay? And another is your rolling editing. To see this, the keyboard shortcut for these tools are b and m respectively. Ok, so let's first see the edit tool we have seen in their deletion, Bart, Okay, how do you use it? So for that, what I need to do first, let us suppose I just need to click the up key or donkey, OK, to reach at the corner of this. Okay? And let us suppose I want a particular section. Let us suppose this section I want to insert, OK. I just need to insert it ok. Let us suppose I have just inserted it at the back. Okay. But but what I want guys what I've warned, I have already told you that if I want to crop it, okay. If I want to crop it, you can see this. I want to crop it down. You can see the Mattel space is also, you can see this. The middle space is also blackboard. Ok? So for this project, it's good that we can just do it and slide ways, okay, we just need to drag and drop it. But guys, when we come to the big projects, okay, big projects, where are there is complex timelines where there are multiple and multiple off or do use visuals. It is not possible. And you know, I teach deletion. You just need to modify each and everything and it's waste of time. Ok? So Adobe will provide you a best thing which is known as a repelled tool. Okay, repelled tool. So what did we do? I just need to Control Z or Command Z, okay, for this. Ok. So let us suppose I want to delete it. So what I need to do is to just press B button, okay? And just drag it where you want the editing. Just crop it and you can see this guy is the sideways the project. It will automatically converge. It will automatically convert. Either it is from this way or that way. It will automatically converge to a particular situation. Okay? This is a particular thing. Another thing is this is your what is known as repair tool. Okay. This is known as the REPL 2D. Ok. Another resume ruling tool. So what is the significance of ruling tool? I just talk about significance. So let us suppose there is this need to control the Jacobian G, Okay? So you can see this guys, I just need to select ruling tool. Let us suppose I want to crop it, marks the time duration. I just want to conserve it. I don't want. So what it will do, guys? Okay, what it will do, you can see this difference more portion. It will enhance this length of this video. Okay? You can see this if I just we need to crop it side-by-side, guys, what do you can see that duration of the second picture. You can see this on the visual. You can see there's guys on the visual. Side by side. It tends decreasing. The first clip is decreasing and the rest is increasing. You can see this. Okay? So this is an all you can do it. You can see this if you just leave it and you can see these guys, the first clip is crop, but side-by-side second pig, where you take its place, okay, it will increase its size and you can see that how it actually works. So what it will do, it will just restriction is not there. Okay. The in and out at extraction and Mark and Mark, Martin and mock out. The restriction is not there. Okay, so what it will do, it will just turn. You can see this. It will just show, you know, edited to the size of it. Okay, editor to the size of it. But is it you know, is there cropping it to the end of it? No, we cannot. We cannot. You can see this is I want to you can see the duration of this picture. It is. You can see this five seconds, okay? It will not increase it. You can see this here. It will not increase their deductible resistor for doing so, you can see this, okay, it will resist it for doing so. If I just further won't do crop it, it will not increase the UNC this gaze. And we'll show you cross. So this is what ruling does, okay, I hope you get an idea of how to use these tools okay, at which situation? And I know that you can use it precisely based upon the particular situation that you come in front of your daily life. Ok. So this is it for this video, guys. Okay, we'll see you in the next Happy premium probe. 18. Slide and Slip Edits in Adobe Premiere Pro: Hello guys, what's up? So in this video we are going to look at two important tools, which is known as slip tool and slide two. Okay? So first of all, I just need to give more display to, okay. So I just select this slide told users need to press it long and you just need to selected slide tool. Okay? So you can see this, this is a slide tool that is in your projects. There are various kinds of things that you see, okay? First, choose your overriding n. You can say that in-place override, okay, in-place over it. It might happen that there is the sequence of this, okay, this is my particular sequence. You can see that there's a particular sequence. And I want clip to be start from here, not from this, but here. So what can I do? I just need to take this slide tool, keyboard shortcut is you, and I just need to drag it. You can see this guy is, I just need to drag it. Ok. You can see this. You can see the user interface. You can see this. I just need to drag it where I just need to reach. Ok. If it is not visible, what you can do is you just need to expand it and you can see this, okay? If I just control G And you can see this known mogul. Okay? So you can see this guy is the eternal covered up the detail offered, okay? You can say this, it will cover up the detail of it. So this is a particular thing though, which is known as your slide tool. It will just slide the frames apart and just override it whatever part you want. Okay. Another is your slip to replace. So let us suppose this is my particular slip guys, okay? So I just need to Command Z and reach back to the previous one. And I don't want this lid, I just want another in and out point. So for that, what you can do is to just slide it down, OK. Slide it down. You can see this slide redounds slider down. Okay? So what it does, whatever part you mourn to initial and final, it will just do the sliding Bart making your particular frame are does seem point. Okay, the seconds are same. You can see this, does seconds Athens out. Okay, but the in and out point positions are getting changed. You can see this, OK. This is how it actually under chose. In this screen, it shows a good amount of editing tools that how it works. You can see this. Okay? So this is a particular thing that you can understand and you can visualize it so that you can able to make a good picture out of it. Okay? So these are the bit confusing, right? At some point when you are grabbing a good projects guys, okay. When you are coming up with the advanced topics offered, okay, you, you're getting more use to use over, okay. So this is it for this video guys. Okay, well it's even the next Happy Premier Pro. 19. Editing using Trim Monitor in Adobe Premiere Pro: So there is one more thing I just need to tell you is that we can use grim monitor to do our editing part as well. Okay? So what that guy is, what I can do. Ok? So let us suppose this is your clip, okay? And make sure that you have selected the selection tool, okay? Which is v as a shortcut. And you just need to select, you can see this red, the option, okay? If you're not, you can see you just, you can enter the plus key, okay? Or you can just scroll it down. Ok. Now there is, what do you get to do is just double-click on here. Okay? You can see, you just need to double-click and you can see the red button, okay? You can see this red button, okay, a red gap. What you can do is you can see this. You then perform this editing part. You can see this five frames plus ins, okay? Or we can say that the minus, we can perform this operation. Okay? You can see this guy. You can see this, OK. You can either performing this regression or you can perform in that fashion. Okay? This is, what is your, you can see this, this is your ruling additive. Very good. So you're, Because it is a most important thing that you can use gates, you can see this on your selection monitor, ok. It will give you more independence, okay? And flexibility. Okay? The conceptive seemed is the concept of CME. But here what it is, we are using the dual monitor, okay, we are using this tool monitor to do our editing part. Okay? You can see this if you just drag it down, it will give you more flexibility. Okay? Basically guys, I want you to be compatible with various kinds of, you know, terminologies. Because for some people, this setup is good. Okay? This setup is good. You can see this. For others. This setup is good unions in this case, okay? By just clicking on this, you can see the cropping part you can perform, okay, by just hover over your mouse and you can see the cropping part. You can see this. Ok. So you can perform various kinds of things, guys, by just making yourself compatible. If you are compatible with this kind of, my job is to explore each and every one. You just need to select one, okay? Because guys, it ultimately depends upon you how proficient you want your editing. Okay? So this is a basic part that you need to understand first. And then we'll move forward to explore new functionalities and the tools that you guys want. Okay, so till then, happy Premiere Pro guys. 20. Adding and Deleting Tracks in Adobe Premiere Pro: We have seen various kinds of editing techniques in the previous module. Now guys, we need to master this timeline, Okay? This is our timeline, Okay? So we are not focusing upon other things. We just need to first master this timeline if you want to become a professional editor now is you need to first understand this timeline. Okay? So we just need to first understand these are the tracks. Ok. These are the tracks now is where the actual thing is performed. This is for video tracks. You can see this and this if or audio tracks. Okay? And this is a separate track which is known as master drag MASTER_TRACK, which we will discuss it in detail in the next video. But I just need to focus upon these tax case, okay, these tracks. Ok. You just need to focus upon that. Ok. So let us suppose there is a, I just want to insert video, okay? You can see this place. I just need to insert a video. Okay, you can see this. I just need to drag and drop this thing, okay? Or keep the existing settings. So we just need to make this sequence, okay? So there's a particular sequence that I want, okay? You can take whatever it is, okay? So you can take it ok. So the way we can insert it OK. This need to increase or decrease the size. You can see this guy is if you just hover over it, okay? So there's, you can see this. If I want to add video, you can see this. This is a particular sequence, or we can say that our timeline in a sequence entertain line. Okay? This is what we want to visualize at particular instant of time. Okay? At a particular instant of time, what do we need to visualize is based upon this timeline. Okay? This timeline helps you do create ad graphics, whatever it is, guide our photographs and all effects, if you will, do. After effects gays, I make you understand more on this, okay? But till now, we just need to understand this time then first you that it is basically guys, it is basically in order to do some editing partners, we can say that in order to do some professional walk, okay, are the pictures, are the graphics. There's a basic timeline between IQ. Now. There is, there is a, this is a thing that you understand, okay? Now guys, now, now the most important thing, OK. If I want to add a video, there are two ways that you can do at first is you can drag and drop if I want a fourth video track, ok, so what I can do, I just drag it and just release it. And you can see there's eventually it appears. But I just need to warn guys. I just need to control GEO Command Z. Okay. I just want a term annually and wander to drag it. I just wondered manually. So what can I do, guys? I just need to right-click. Okay? And you can see this guy is you can add track. Ok. This is a particular thing that you can do. This a basic thing that you can do, okay? Another way, what you can do is that guys, you can add multiple tracks at the same time, okay? If you want three tracks for video, what you can do that is just right-click and you can see these guys are tracks, ok? And it will display multiple options that how many times, how many number of tracks you want to give? I can give guys retracts. Okay. I just press OK. And you can see this guy is three tracks. 567 appeared. Okay, so this is how you manually do it. I just need to press controls your command G. Ok. Similarly with the case of this guy's audio track, ok, you can see this. You can even add tracks of audio file. Let us suppose two tracks I just need to want and you can see these guys, okay? I just get what I want. Because this is a particular thing that helps you to do editing and which helps you to do various kinds of things. Laser, if I want to add drugs, okay. If I want to delete track OK, if I want to delete it, I can do it explicitly. Ok. I can do it explicitly. So does a particular thing that you need to understand, OK. This is what is basic, basic. In this video, we have learned while it is, there's basic of timeline. Again, whether it is basic of timeline. And second most important thing is adding and deleting or drug, okay, trackers where we put our clips. Are photos, videos, editor, editable part, or we can say that effects. Okay, whatever it is. This is the structure of a video in which we need to create it. Okay? So this is it for this video guys. And we'll see in the next API Premiere Pro. 21. Track Output and Locking Techniques in Adobe Premiere Pro: So we have come across some of these situations where you are building a project. Ok. Suppose you are building a big project like this. And there are some clips that you don't want to delete, but you have to delete it for giving something on the other. Okay? Let us suppose you want to give it for production, okay? You want to give it for production. But you don't want your timeline to getting disturbed. Okay. You don't want your timeline to get disturbed. So what type of things you can do in that Part? One thing I just want to give you is dark guys. First thing that you can do is this. You can see this guy as you can see this time I button, okay? If you do not allow, if you do not want others to see a particular track, let us suppose I don't want this video to be getting displayed to 24 if, if I want to give it to editing part, okay, if I wanted to, if you, let us suppose you are in a production guys, ok? You are in a production house and you have created a sequence of timelines, okay? And you don't want this music to get delivered. Ok, let us suppose you, you do not have a copyright on music and the background yet, okay? So what do you, do? You just need to you don't want it to give it to them. But and with the with the condition that you don't want this timeline to get industrial otherwise worded happens that I just need to delete it first. Okay. I just need to delete it. Okay. I just need to delete it and then gave it. Okay? But in the third deletion dies there are north, north of editing, like changing in my frequencies are at some point, okay? Chaining, some audio visuals are at some point obesity modulation, okay? These are certain techniques which is at high level. I just need to give you an exponential at high level. If you get into detail guys of the audio that we want to visualize it, we'll see you in the largest section, okay? But right now, you just need to understand in a high level, I don't want OK. Button gay, but with the condition that I want to distribute. So for that day is what you can do for video. I just need to give this is I unburden days. If you just de-select it, then what happens is you can see this. If I just selected, you can see this yellow line, okay? If I just de-selected this yellow line has gone. Where did symbolizes that dies, that this part is not getting displayed. This part, you can see this guy. It is entire black screen where you can see this. This is untamed black screen. Ok? So what it does if I just unmuted, you can see that if I just unselected, you can see this. It is visible if I just selected. You can see this, it's gone. So I don't want this part to get display it. So there's a particular thing that you need to understand. Okay? Another part for audio prospective guys, I don't want this last track to be good to others. Ok? So what I can do Guys, I just need to mute it. Nicer guys. What do you need to do? You just need to mute it. Nude means that this timeline is getting there, okay? But the sound is not going into the actual output. Your sound is not going into the actual output. Ok. It is similar that you have deleted this last truck. Done. Okay, simple thing, guys. Again, you can perform in various stages, okay? Another thing that is, another is used so low part as you can see the solo track. What solo track means that there is, in a moody movie production, you just want this particular narration to give to or to individual. Ok. You don't want the rest of the tracks. Okay. Would you one way is that you just mute each and everything. Okay? But if you want, if there are hundreds and hundreds of tribes raise, if you have seen the, you can say that you don't movie production days, there are approximately guys tend to 15 tracks. Ok. You get if you have seen okay. If you if you are if you want to do an internship in production houses, you have seen that there are 1015 tracks. So we cannot do Mu part, okay, at individual steps, what we can do this, we just need to click on this solo part. It means what it means that this is the only track I just need to warrant in my output and the rest are getting muted automatically. I just need, I don't need to explicitly mute them. Okay. I don't need to explicitly mute them. This means that only this track is getting displayed and the rest are getting muted automatically. Ok? So these are basic. I look yesterday that you need to do Bayes, okay? Actually you need to check it out, okay, have sum set off a generation and a background. Noncooperative music. You can find out on YouTube and various kinds of Google if you Google search it and just try to make your own video guys, okay? Okay, open up YouTube channel and just try to create it, I hope guess guy is most of the mass storage we want this thing that, so how we can do it, okay, editing by certain basic editing part. Ok, so just try to do it. Okay guys, I hope you like this video guys. Till then, happy Premiere Pro. 22. Using Markers for Editing in Adobe Premiere Pro: So guys, in the previous video, we have seen how to mute and unmute it. Okay? So we have successfully understand the concept. Ok? Now, we will, now what we need to do is to add some markers, okay? In your editing career guys, you will come across various kind of projects. Okay? We're days, there is a scope of error. Okay. Like you don't like someone else work. Ok. So within our team of we can say that five or six people, okay, they are just working upon the same editing part. How good they are managing a whole production. Okay? So what you need to do guys, you just need to add some markers. Okay. Like there is a you can see that there is a particular color combination. I don't want I want to remove that color combination inside the spec. Okay. The color combination is bright or give them back word lightning is more, the noise around the clip is more. So for that duration or for that particular instrument, you can add markers. Okay, so for markers guys, what do you need to do is to just come up here and the keyboard shortcut is make sure that you have selected the particular clip where you need to add markers. Let us above days, I just need to add a Mancur here, okay? And this instant, okay? And you can see this guy as you can see the ok. You can see this but okay. Okay. You can just click on this button. You can just click on this button. And you can see this. It will come up here also, ok, if I just double-click on it and you can see these guys, I can give a name to this marker. What type of name I can give? I can say that guy's color is right. Okay. I can add in. It should have low color intensity. Okay, I can add this thing as we look at, just click on this OK button and you can see this gaze. Whenever I hover upon this, I'll get this marker, okay, where I want to you can see that gays, okay. Whenever I wondered. So it is similar to this? Distinct. It is similar to this. Okay. Where I have this marker, it is similar to this. Okay. You can see this. The dialog box is also appeared here. You can see this. Okay. Oh, it looks like. Let us suppose there is a gap. We can see that from this duration to dark duration. Or we can say that small duration we can take from this duration, but this duration there begins to that noise. Okay, so for that, what we need to collect guys, I just need to deselect this thing and just, just select this. We can say that sequence, okay, now if we press a button and you can see this guy is a marker, is art here. Okay? If I double-click on it and I can give that noise resident. Okay. And I can give comments lake that remove noise. Okay. We can give and we can give the deletion is we can give her duration like for 1 second. Notice coming over 22nd, it is coming on and you can click on this, okay? And you can see these guys from this direction to this direction and noises coming. So you know that there's someone who is more specialized in this Premiere Pro will catch this idea and we'll try to manipulator, Okay, I know you all are becoming a professional, but there is these markers help you to understand your timeline because in the huge movie production, you cannot remember each and everything. You just need to set up markers, what you have done. Ok? Let us suppose previous, the previous interval, okay? What type of things you are doing, okay, for a duration, like let us aboard for a duration of 20 minutes. What type of scenes it has showing you who gave what type of scenes it is showing you, like crime scene or we can say that the shootings in Roman scene. Okay, what is our duration and what type of editing we need to do in that duration. Okay? Either there is a sound effects will give to these markers will help you do. Get more insights. Okay, is, this is what I need to tell you guys beneath to master this time then raise each and every aspect of each and every tool so that you will became approve editor case, okay, if your fundamentals are clear, there is, you can make are handled any project case. Because all the professional, I've gone through these phases and even now on as well, guys who gave whatever reserved professional editor, they need to divide these fundamentals. Okay guys, from my experience, I just need to guide you to the best. Okay, guys. So this is it for this video, guys. Okay, we'll see you in the next Happy Premier Pro. 23. Reviewing the History and Markers Panel in Adobe Premiere Pro: So there is, we have seen this marker. Ok. We have understand the basic concept and where we can use it. Ok? So guys, at sometime, you just need to have a look because you cannot hover over each and every timeline, okay? You can see that there's a big timeline, okay? You cannot be with death and you cannot remember where this marker is. Okay. So the Adobe will provide you, please. Okay. We can see that, please. Where all your markers are detoured. Okay. You can see this. If you just come up here and you can see this markers, okay? You can see that there are various kinds of markers where it is, are there, ok, whatever things we can do these markers, you can see there's guys, various kind of markers. You can see these are selected and you can able to perform various kinds of functions out of it. You can see this, how these things are performed, and you can see these guys for a particular sequence, what type of marker it is for a sequence. This, you can see that if I just de-select it, okay? And you can see this, okay? So this is a particular thing that I want, okay? For beginners. If you do not come across this panel, What do you do? You just need to come up here in this windows and make sure that you have selected this marker. Ok, if you don't see these markers option, you can see this. And one more thing I just wanted to give you guys. Make sure that you have selected this history panel. Okay? Make sure that you have selected this history bundle. And you can see this history. You can see this. Okay? You can see this. And they didn't history. And you can see this guy is whatever modification that you have done. Okay? You can see this word table modifications are done in this and this and this. So it will give you each and every modifications, each and every, we can see that error that you have created. Okay? Well, whatever it is guys, okay, it might happen that whatever two in this we have done till now is good as compare to others. So you can see this guide is everything after it is during these electric. So whatever modification that you have done afterwards is getting de-selected, make sure that you have and it is already selected a here. Okay, you can see this, all these markers and all if I want to remove advice. So you can see this, I just need to come up with videos where I have selected the solo track. Ok, so all of this terrestrially are getting these elected and you can perform modifications and the rest is not getting displayed. Okay? So do not think that you can do the control management in history part, okay. Make sure that you have done these kind of thing. Because guys, these things are very important for your project perspective. If you want to master the timeline is makes sure these type of things you can able to handle. Okay. Because in your interviews as well, guys. Okay. In your interviews as it oh, it's okay that you are bro editor, you can add animations and graphics. But guys, these basic knowledge should be summarized because it is not only for or getting a job, okay? It is getting, educating yourself, okay? Seeing the mistakes, learn from your mistakes and do the best out of it, okay, from the previous. Okay guys, we'll see you in the next video. Happy Premier Pro. 24. Customize Transport Controls in Adobe Premiere Pro: So we have seen how to set up are you can see this this panel, okay. Unga is, as you can see, this your source monitor and this is your programme monitor. You can see this. Ok. And if I want to customize these button guys, okay, if I want to do the customization on buttons part so that I can have a big picture. Okay, I don't want this, but buttons. Okay. I'm fully furnished with keyboard shortcuts and you can see this guy is mocking Margo, okay? And the keyboard shortcuts. If I just hover over these buttons, it will display it. Okay, mark or for oh, I, okay. And if I just do want word, what I want if I just do Hoon to edit or customize these buttons, or we let us suppose I just need to remove these buttons from this monitor so that I am having a wider picture because I'm fully for an instrument, the editing part, I know what is a keyboard shortcut for which editing tool. Okay, so for that what I can do is to just click on this. You can see this orange, okay? Okay. And you just need to deselect this short transport controls, okay? And you can see this, the transport control is de-selected by conveys. I'm from New Project monitor. It will give you more wider view, okay? Which will give you more wider view. So either you can select it or de-selected, okay, it as your transport controls. Okay, similarly for this thing as well, okay. You can de-select, redox selected, okay? So this is what I want to show you. And another thing that is there are some customization on this transport control part. Dark if you just click on this plus button base based upon the editing, if you want to do, is to just press on this button. And what you can do guys is to just are there, okay, let us suppose I want to deceive margin, okay, I can do it, okay? Or I can, you know, make it wherever I want. Ok, if I wanted to make in this position, if ammonia omega1, this position, this position, or whatever position it is, okay, if I want do de-selected, what I can do is to just remove it. Okay. Just take it out and you you are getting the thing is getting removed. Okay. And you can add it from this thing as well, okay. Again, you can add it. Okay. You can see this. I just need to drag it down, okay? Okay. And you can just perform these kind of operations. I wanted this, this ok. So if you have, you know, perform some modifications and if you want a default modification, you just need to click on the Citysearch layout. Okay, so what we will do is it will reset all the options that you have created. Again, this led press 2k and you're done. Okay, it fell again back to its original position. So this is a particular thing that you can do for customization days. If you are very well furnished with these keyboard shortcuts, you can remove it and just focus upon this panel, program panel and source panel. Okay? So there are, there is a wide aperture of you and you are getting more space for editing. Okay? So we'll see you in the next video. Guys have even improved. 25. Importing Images and Working with Stills in Adobe Premiere Pro: Hello guys. So now what we are going to do is to work with still images and see the transition between them. So in this video, I'm going to show you first how you can work with still images, okay? So this is an image case. First of all, I just wanted to show you that how to import images, okay, you just need to double-click it and select various kind of materials that you have. Have, ok, let us suppose this temperature. You can see I have selected, okay? So I'm just walk upon, a walking upon with this image joke of a puppy. Okay? So guys, you can see though pixels and all the basic tile Lin Ju which come across. So various kind of graphic editors is yes, like the unable to manage the size of this pictures, okay, in the sequences or in movies. So we'll see how we can do it, how we can fit it in our sequence. Ok, so let us suppose I want to import it in my sequence. So what I do, I just need to drag it and show you in that sequence. Okay, so this is a sequence and you can see this guy is how it actually looks like and how it is when, you know, in co-located or intrude into a sequence. Okay? So first of all, what you need to do guys, okay, there are two methods that you can do is to just first selected anger is you just need to make it 25%. Okay? And if you just double-click on this image, you can see this guy is a, there is a frame that appeared. Okay? You just need to, you can see this minimizer and you're good to go. Now if you just look at it in 75 or a 100, you can see this is how it actually looks like. Ok, now it actually looks like and you can even change the position from here to there. You can see in this case, okay, from here to there, and you can see this SIM card guys which you can move. Okay? So the thing that you can do it, you can see this, okay? And we'll see some older transition as well, ok. And other ways to gesture selected days and just click on this set to free more skilled frame size. So it will help you do get it, you know, selected to the free. Okay, if you are having a frame size of sequence ISO photo, which is as per you warned us buddy or sequence. Ok. So there's some particular thing, OK. And what do you do if your videos are the backward okay, earning is at the back. Okay, you can see these guys Howard actually looks like. So you can see there's guys, okay. If I just scroll it up, what I did is to just make a track upward and assignment at the end you can say, okay, this will work parallely. See this little walk parallelly, ok? You can increase or decrease the size offered days. You can see this, okay, if I want this image to be displayed for a long amount of seconds, you can manage it. As you can see this you can able to manage it and you can see the duration in the, you can see this frame. Okay? So this is a way that you can do it. Okay? So in the next video, we'll see how we can perform some more and modification on these still images. Okay, so till then, happy Premier Pro. 26. Animating Stills in Adobe Premiere Pro: Now we'll see guys how to animate the images. Okay, we have seen these are the still images, okay? And right now what we need to do is to try out different ways to animate it. Okay, so for that guy is what we need to do. Make sure that you have selected this aerating position, ok, this editing, and make sure that you have selected this clip, okay? If it is de-selected, it will not come into play. Refuse selected. Okay, you can see this guy's, this clip is selected. And then you just need to come up here in this effect controls, okay? And you can see this grace. This is an icon which appears. You can see this is an icon. And in the motion that is, you can see this in the motions you can see that there are scale, position, rotate, anchor points, which will help you to animate a simple picture like this. Okay, so we'll see how we can do the animation part. There is, you can see there's a timeline for animation. And with the help of key frames, we'll see what it is if we want to animate guys. Lots and lots of students are asking me a question that said, if I want to traverse, that, I want to traverse this image. If you have seen certain kinds of documentaries, guys, okay, in the documentaries production, you need to zoom in on the artifacts. Let us suppose a research paper has been published by Einstein or risk Steve Job o, or any one of them. Okay. What is a research paper that they have written? If I want to make a production, OK, if I want to make a movie, I just need to show the documentary production. If you have seen that various kinds of artifacts are needed to be traversed, what that guy is for that purpose, with my experience, I would need to guide you what type of key frames are, how the transition works. So how to animate it, guys? What do you need to do? Is that this is a sequence, okay? And this is my timeline, okay? Okay? Similar like this. Ok. So if I want to add a transition, like if I want to zoom in into this, you can see that the face of this dog. So how can I do it? So guys uses need to first click on this scale, but ok, just click on this scale button and you can see this. This is a key frame. And you can see that a key frame has been added here. Okay? A key frame has been added here. Okay? So this will set your position right now, okay, it will store it as a meat metadata inside this. And guys, if I want to zoom in, ok, let us suppose I want, I need to zoom in here, ok Tilden, the focus should be zooming. So what I can do Guys, you can see this. I just need to change the you can see that I just need to change the zoom in part. Okay, You can see this grace. How, what type of zoom-in I just need. And you can see there's guys, you just need to set up initial position. Or we can say that initial scale. And The final scale, and it will automatically do the zoom, particularly this case, you can see how it actually works. Very simple guys, very simple enough. Five-year-old kid can do it. Okay, you can see this guy's uses need to zoom in and you can see this, how the effects work. You can see this glaze. You didn't see the timings as well. Ok. Based upon the timings, you can set up these, you can see this how the transition works. If you want abrupt changes, what you can do, you can just drag it down here that it will appear abruptly urgency this period. Now, you can see the speed. You can see now that as far as you can see this nowadays fast. Okay? So this is how you need to manage as per the seconds that you guard or gas, but the production settings, you just need to able to manage these kinds of stops. K. So K, I hope you'll get a point like how we are doing these productions and all based upon some documentaries. If you want to position that is if you want to position, let us suppose I want to position it to, let us suppose I just need to position it here. Ok. Let us suppose I just need to position it at some point, okay? I just need to, you can see in this case, I just need to double-click it. Okay? This is a way how you can position in base. There is an abrupt change. There's a fine starting and this is a final position. So you can able to selected guys where you need to do the transition part, okay. You can do the selection part if I just randomly, if I just you do it, you can see in this case, you can see this, okay? If you want to do some changes, you can see the curves, like how the things, you can see this gaze. If you want to do it in this manner or in slightly different manner, you can see this guy is how the things work, how the animation goes, OK. And you can even change the, you can see this busier, okay, or too busy. Okay, so that you'll get more control over this cove part, okay, You can see this, you can have a more control over this cove part. Okay? So you just need to play around with these kind of stuffs case, okay, uses need to play around these kinds of steps so that you can understand the things where even so that you can able to grab more things. Okay. How do things work? I just need to need you to do homework guys. Some documentation of Einstein or Newton, and try to do the analysis of people. Okay, just try to zoom in. Ok, so this is where guys the mostly whenever it is used. Okay. This is the type of things where the mostly things I use. So try to do that work guys for me, okay, so that you can understand the zoom-in part, how to traverse, how to position, how does scale, if you want to position it, guys, this is an initial, this is a final, and you just need to add a key frames like this, okay? If you did something wrong guys, you can do one thing, you just need to delete it, okay, just press the Delete button and you just need to select it and just deleted ok, as simple as it is, ok. And you can see the how it actually works rates. You can see that you can do the positioning here as well. Okay? You can see this and you can see this a how keyframe is ultimately added. Okay, by just doing some more modifying some of the transitions that we did. Okay, I hope you remember these kinds of things. Okay? And we'll see you in the next video. Till then Guy's happy Premier Pro. 27. Transitions in Premiere Pro: Hello guys. So in the previous video, we have seen how we can emit the still images. Okay? And right now what we need to do guys, we are focusing upon the transitions. So I'm just walking upon my project. Okay, so this is my project guys. Ok. We are there is a picture clip one and I just need to switch to another peak. Another clip. Okay? So you can see this guy is that this is a particular picture. And if I play, you just need to listen first. Okay? So this is a particularly, as you can see, this caterpillar isn't, isn't the first image and there is an abrupt change. You can see this, there is an abrupt change. You can see this, there is an abrupt change. You can see between this caterpillar image and this stream. Okay? So I want something smooth functioning. I don't want this abrupt changes. I want something dissolving part. Or we can say that, which actually shows that the clip, it's changing. That clip is showing something on the other. So for that, what I, what I can do, you just need to come up here in this project section. And in the project section you can see this window. Okay? And you just need to select effects. Okay guys. You just need to select effects on selecting this effect, guys, okay? Oh, okay, that is, if you do not find this effects on this media browser part, what do you, do? You just come up here in this windows and you can see this guy. You can sit, you have selected this effects. That is what tailored tools I'm just talking about. Okay, whatever it is. Okay. If it is missing in your console's, in your Adobe Premier Pro, this UI, you just need to come up here in this windows. And you can select as per your requirements, okay? You can select task by your requirements. Okay? So we just come up here in this effects part and you can see that that is what I can do is to just select this video transitions, OK. Video transition. I just want this image to get dissolved or add some other. There are various kinds of transition that you can see. Transition is one thing that does is that it actually looks like that clip has changed. The first clip is changed by another. Okay, so let suppose this is a cross dissolve. So what I can do guys. I just need to either I just need to zoom in, okay. And I just need to drag this thing. Okay. And just put it between between the two clips. Okay. I just need to put it between the troop lips. And you can see this guy is, okay. You can see there's guys. You can see this. Howard, I actually looks like you just need to put it between. If I just play it, guys, you can see this. The clip is actually getting dissolved deviancy, in this case, the mice looking effect, okay. If I just unmuted and you can listen to this. Is, is it nice now? Okay? So these are the things that you can see grays, okay? And if you want to do some of the modifications on audio part, you can do it today's, okay. You can do it as well. So what do you do, guys? Let us suppose I wanted to change music here, so I just need to cut it, guys. You can see this, okay? And select it and deleted. Okay. And I've gone to just come up here in this mime project panel and I just need to add another audio. Okay? I just need to add another audio. I've taken it randomly. There is. Okay. I've taken it randomly. Okay, I just need to enroll z. Okay? So I just need to do some transition between these or do's. So what I can do guys just come up again on this effects part, okay. And I just need to do or do your transition. You can do or do your transition. Okay? So you can see there's, there's own steam power, okay? Exponential fared. So you can see this guy's word typo for transitions you can perform, okay, over this. Between this, you can see this between this wartime book transitions you can perform. Okay? It just controls the and again protect. So you can see this guys. Okay? So these are transition that happens, okay? If I just unmuted and just play it. You can see, you can see this guy is a little bit fade part, okay, You can see this a little bit fared part if I don't do it. And you can see this. If you just apply it, guys, you can see a fade part, okay. You can see this. See this. A little bit failed part, okay? Another, we can see another constraint gain. Let us suppose we have added this effect and you can see this. You can see this, OK. You can try nowadays, okay, you can try it out. These are certain effects, gaze or audio effects that you can create, tie it out, try it out on different kind of rejects. Ford productions. It is very important for production movie productions that very important days, basically for your music production based music production houses, okay. They want their Editor to be. This audio transitions between you guys have seen that there is, if you have performed some older modulations and all these kind of transitions are very important time video productions. Okay? We will see in detail in the next course case, okay? But for now on guys, I hope you get an idea there is how transition works, okay? How actually transition works and how we can, you know, dissolved iron, how we can transit from one clip to another. Okay, So this is it for this video, we will see you in the next Happy Premier Pro guys. 28. Modified Transitions in Premiere Pro: So guys, in the previous video, we have seen how we need to apply the transitions either it is o for due or overdue. Okay? Now varies. We need to set in duty. Okay. See in detail that how we can modify these transition. Okay? Either we want to increase a very tough or to order additional kind of transitions. Okay? Let us suppose there is, I've selected this transition, okay? And I just need to come up here in this effect control. And you can see this guy is here. You can see this, that there are lots and lots of options that you can see or which will help you to increase or decrease or transition. You can see there is you can either increase or transition on right inside or you can increase it on left-hand side. Okay. So you can see this guy is how it actually looks like. Oh, well, you increase her transition. Okay? So you can see this. Okay? So this particular thing that you can use for transition, I just take a popular transition which is known as white plays. Like. Okay, you just need to search up here and again, see this guy, you know, various kind of wipe transitions. Ok. So if I just select this wiped transition and I want to center it here, okay, so what can I do is to just set it up here and you can see these guys weren't happens. Oh, wait a second. I just need to delete it and then I just need to add it. Okay. You again see this guy's Howard actually looks like, okay. A second. Howard actually looks like, oh, it's a video effect, sorry guys. It's an effect not at a position. My transition gums up here. So this is my transition. You can see this, okay. Is our transition that you get. So what you can do guys, you just need to select this transition and you can see this, there are various kinds of options that are available. You can see this source and you can see this. How are transition works? So you can see this case how it actually works in transition. Ok, Howard actually works in transition. You can see this. Again, I just need to play it, okay? And you can see this, okay? So you can even modify it, guys, you can see this, you can see this or show actual sources. You can you can see this how it actually looks like, okay, increase or decrease in density. You can see this, how it is starting, how it is happening, okay? From where it needs to end. Ok? So you can do some alignment guys, the border where you can see this need to add border where the ok. And you can see this, how a border looks like when you can see this guy is there's a border. Okay. You can add, okay. So you can say that guy's old films, okay? These borders are added. If you want to create a production houses which will show you some of the details of old pictures. Okay, guys. Okay. So we this kind of projects and have been coming for a video productions days where, you know, the situation of 19 sixties or 19 fifties, okay? If you want to relive that movement in that movie productions, okay? So these borders come into play, which will show you the wiping out part, which is in the initial phases, awful movies production. Okay, so there is, you can say that R to the application which we help, which help us to know how things work, okay? How exactly it does, okay? Because these are the small, small instincts that you need to understand first, so that if you grab this opportunity, guys, he will make a business out of it because you can see this. You'll make best out of it how to understand these kinds of drawings and two inches help you to understand the best. Ok. What type of you can see this productions you can use, okay? So the basic part that will help you to understand better. Okay guys, so this is it for this video, guys. Okay, I see you in the next video, guys, till then, happy Premier Pro. 29. Applying Multiple Transitions in Adobe Premiere Pro: Hello guys. So I'm again in this session gaze and I want to show you something which is known as guys. Are, you know, there are certain set of clips case and you cannot add each one individually transition one by one, okay. A lot of people are asking me a question that sir, for a certain set of sequence. If I want to add, you know, if you want to create a video for YouTube channel, okay, without having various kinds of images, still images. And you want to do some animations and all. And you wonder transition to be seen. Just like dissolve transition. Okay? And you want to apply it on various clips. So instead of wasting time what you can do guys, okay? You just need to select it, okay? And just come up here in this sequence, okay? And you just need to see this is apply a default transition and you just need to select it. Just click it and just press OK. And you can see this place, Howard, IT looks like you can see this. Ok. This is a default transition and you can see this gaze. It has applied to individual clips. Ok, it has applied to individual clips. I hope you get an idea about it. Now, the most important question, sir, how we can manage this default transition? Either if we want to increase our transition or time, how we can do it. Second, how to select our default transition, okay? So first question is, how to setup the timeline, okay? Like how to set the timer for this default transition if you want to increase the size, how can I do it? Okay? So what you can do guys, you just need to come up here in this edit section. Just click on this preferences and just come up, come up here in this timeline. Okay? And you can see this, just wait for some time. And you can see in this case, you can see this video transmission default duration. So you can select it guys, as per your requirement that the what is our default to image duration, or we can say that our default video transitions, audio transition, okay? You can select it. Okay? This is a mean part that you need to do, okay? So you can select it. Okay? Another thing that I want to give you is that is how to select default video transmission or do your transition, how we can do it. So just come up here. Let us suppose this is my video transmission, okay, I just need to de-selected effect. These are the video transition and I've mourned term. Let us suppose this. I won't to select it as a video transition this. Okay? So for that, what I need to do is to just right-click and you can see this selected as default transition and that's what you need to do. That Ed, what do you need to do? Okay. You just need to selected, right-click it and your transition is getting selected. That simple dyes, that simple, I hope you get an understanding that by creating the production, how to select all and individual clips, how we can do it, okay? And this is amazing main or basic perspective of making this video. Okay? So I hope you like this video guys, tell them there is just one thing, happy Premiere Pro. 30. Creating a Basic Title in Adobe Premiere Pro: Now, I have seen lots of videos, guys. And you have seen that the in the initial phases, lots and lots of people are saying that, sir, we want to give a description or titles to our video clips. Okay. In any shells in the starting, like what is basic about of this video, okay. We can say that this video is about travel. Travel, or we can see that wildlife, whatever it is, whatever it is, whatever it is like, whether it is awful movie production. We have seen the actor. The name like this song is written by Justin Bieber or Taylor Swift, various kinds of things. Okay? So for that guy is, let us suppose this is my video and I need to create title. So what I can do ways in that 20-20 version days, you can see this adobe 20-20 version. There is some modification. There is no tool bar. You can see this. But in files menu you can see this new. And you can see this guy as you can see this legacy title. Okay, you just need to click on this and you can see there's guys, you can add title name. So I can give whatever title Nim let us suppose I just need to give a title Travel. Okay. I just need to give a title as our travel. And you can see this guy is, this is an image which is transparent. You can see this transparent image that you can see that how it actually looks like. As you can see this, how the transparent image actually looks like. And you can see this guy is a, we can perform modifications like you can say this. There are various kinds of alignments that we can do. Ok? And you can see there's guys, it is actually transparent efficiency, the background of it. You can see this fits transparent. So why it is used? Why it is used? I just tell you, I just need to add some foreign ok. Let us suppose raise. I just need to add it. Okay. I just need to select it title. Okay. And I just need to give travel. Era is I just need to give travel and I just need to select it. So if you have worked upon Illustrator or Photoshop, you might deal aired on this panel, okay, because Adobe will create a panel or a tool. So your dirty too, where you can, you can see this raise awareness kind of operations you can do, okay? X-axis forms, you can change the forms, okay? Whatever it is, either it is bold or anything like this. You can change the color. You can change the color. You can see this color. You can see there are colors that you can see that you can use, okay? You can see the aspect ratio, okay? And if you want to add some shadows, okay? You can see this. I want to add the shadows. You can see this, OK. various kinds of properties. You can see this guy is OPS city size, okay. Background. So you can perform it raise. Okay. I just want to show you that how it actually looks like. Okay. In the beginning it would look like this. Okay. So for that guys, I hope you get an idea how we have created a title. Okay, this is a way how we can create a title track. Ok? So you just need to de-selected. We cross it and you can see these guys, this is our title track in your project fail. It might happen that it will appeared here, but some point of failures happen. Ok, you have seen this. So what do you do this? You need to drag it down, guys. Okay. You just need to drag it down. Okay. And you can see this guy is Howard, actually looks like that is where the video is transparent. You can see this. If I just play it. You can see this nice. Okay? This is how it actually looks like, I hope. Okay, so it is the best way to add titles, okay, in the middle of pictures, if you are making the geyser movie production, which helps you to create recipes, guys. Okay, we just kind of recipes either it is o for baking cake, making pastries and all. Ok. So for that guys, they want ingredients okay, to appear. So we can use these kinds of titles. You get this idea as I zoom where these titles, where we can use these titles, okay, either in the beginning, you can see that the, either in the beginning, we can say that five years ago and there is a transition and you have added their title that five years ago, and there is a transition and another clip appears. I hope you get up production idea guys, how things work. Okay, these are the basic tools, grades. If you master it dies. If you get, if you know the software days, I bet you on this die is you can't perform any production house. Okay? You can be on any production house because these are the tools that help you to make your foundation. Okay. So we'll see you in the next severity. Raise ok, Tilden, happy Premier Pro guys. 31. Adding Rolling and Crawling Credits in Adobe Premiere Pro: So now we are discussing about the crawling and ruling. Okay. So whether it is okay. You have seen a movie days. Okay. I hope you do. And in another movie guys, you have seen that certain kinds of protections whomever are involved in this movie productions. They are coming in the upward, okay. They are coming up in the upward direction. You have seen the ending of the movie. Okay? So how to make that kind of thing? How to make that kind of thing. So there is one way of doing it. Just come up here in this new and you can see this guy is legacy title. Okay? I just need to take end. Okay? Anyways, you just need to select. You can say, you just need to select, okay. You can say that movie production. I just need to select it. Okay? And you can see this, just need to make it small. You can say that my name, okay? And we can say that my colleague name, My name. Okay? So these are the names. Let us suppose these are the nim guys, okay. We can say that these are the names that we need to select. You have seen this in the Harry Potter movie or in any of these game, earned off things. Okay, whomever are there in this production? Just to appoint a set of example, okay? Okay. Okay. I just need to give it. So if I want to appeared from bottom to top, what type of things I can do. So you just need to first selected days. Ok? And you can see this guy, David is a button. You can see this, you can see this, this new title, okay, you just need to select it. And you can see these guys are all option, okay? You just need to select roll off. And you can select Start off the screen on and off the screen. Okay. And just press OK button. Director Grace, you just need to press OK button that okay. You just need to grocer down. And this is my end of the screen. And you can see this guy is, I just need to put it at D at the end. Ok? So you can see this case. If I just hit the Play button, you can see this. Ok. So you can see this. I hope you get an idea of is, I hope you get an idea, okay, Again, I just need to select it. And you just need to play. Ok. So do, do, do, do some guys system requirements. It is just lagging, but it will show you the same thing you okay, you can see this, Okay. Okay. Okay. So if I just unmuted and you can see these guys, okay. So you can see this. Ok. So you can see these guys. I hope you get an idea that is how to do it. This ruling party. Okay. And now we'll see the crawling birthdays in the news channel. You have seen that there is a box appeared which will display the news rapidly. Again. How to create a days? You want to know? Yes. So now we create a geyser. So let us suppose Guys, what we need to do is to just open it new. Again, just create a project. Oh, not a projectized. I'm sorry guys. Just click on this new legacy title, selector title. Okay. I just need to give it. There is there is a text that I need to give. Okay. This is movie. We can say that because it's a huge text, okay, that we need to add. Okay, it's a huge texts that we need to add. So you just need to add it line by line. So what editors will do, okay? The movie editors will do, they will take the whole set off paragraph inside a notepad, okay? And then they just need to copy-paste the things. Okay. This is a movie production, which is he uttered by my next Sony. Okay, guys, I have, I've just created in one line. Okay. Let us suppose. Ok, so this is our texts that I've created, which is created by, you can see this, we just created by my next one. Okay? So this is our taste that I've created. So what do you need to do this is to just make it down right here, okay. And what do you need to select as just you can select it and you just need to select corral left. And you just need to start off on and off. Okay? And just click on this OK button. And you can see there's Dennis from right now. So you can see this. Now this is our title track. You can see this. Ok. And you can see this here. I need to put out. And you can see in this case, if I just play it down, you can see this, this is how it appears. Okay? There's our word appears. I hope you get an idea is, how do things work, how news channel make these kinds of things for a particular news or offered for a particular, if you want to open a news channel, well, 4001 reduce guys, if you want to display some notifications down there, okay? You can do it just to echo message like guys, like share and subscribe, which is our target, our tagline for all the YouTubers out there. Okay. So you can do it case, okay. I hope you get an idea there is how the things work, how we can perform these kind of things part by part, and how we can actually implement these kinds of things to things we have learned role and crone. Ok, now you can create your own username or whatever you want, okay, you can create it. I hope you get this idea. Raise till then, one thing guys, happy. Premiere Pro. 32. Exporting the media in Adobe Premiere Pro: So we have seen a lot of editing part as well. Okay? But now we'll see how we can export our results, okay? Whatever we tell it, how we can export our results. So for that guys, who you just need to come up here in this final section. And you just need to click on this export and media. Okay? And you, you will see that this is a sequence that has appeared in front of you. Okay, guys. So in order to be a pro editor guys, you need to understand these kinds of things for us. Okay? So that is, let us suppose you are in a production house and you want your client to have a trailer or a glimpse of your video that you have created. Okay. So for that day's, would you need to do you just need to give him the clip. So for that guys, would you can do is to just send him a short range. Do not disturb the entire project of rendering. You just need to give a small portion of it. Okay? You just need to give a small portion of it. Okay. What it will do, you can see these guys were it will do, it will help you to render this small part from this video. Okay, from this entire value. And you can see the estimated size of it, okay? Either way, what you can do is to get the entire sequence, okay? And you can see this or sequence in our sequence out. Okay? This is a particular part that you need to do and make sure that the die is if you want an mp4 format, you just need to select edge point to 264, okay? And there are various kinds of formats. You can see this that I Adobe will provide you in order to do the rendering part. Okay, so you can see that there's Export Video and export audio is when, if you just want to show the clip art that you have created to your video editor, okay, not to your audio editor. You can give it if you want to add some effects on dues. Instead of videos, you can do the either of them. Output guys, output where you need your output to be performed, okay, where you need to store it. So you can select the folder. Okay? So nice. One more thing I just need to give you more attention to is this. Use maximum, maximum render quality. If you just selected whatever you do, Adobe way do guys, the maximum quality of export that could be possible. You can able to render it. Okay, the maximum possible quality, okay, it will try it out. Okay? If you add some of the effects case, there are some effects that you have added to your Premiere Pro, okay, in your sequences. And you wanted to render the best quality you have seen. There is a, I guess you have seen the heavy water that animation that after effects, if you want to add, how can you add? So there is this maximum rendering quality so that there is, there is no scope of a neuron like this is scripted and we can see the animation, how it appears, means it is out of the Blues, okay? We cannot see it as a real, okay. We don't want this and we wanted to use the maximum render quality. So we need to select this, make sure that you have checked this option, okay, and you just need to export it. Or that option is that there is, you just need to select it and you want to use it. And, but guys, if you have used this kind of things, more probability is it will take more time to export it. Ok, here is that you need to keep in mind, okay, it will take some time because guys quality needs time. Okay? Another thing is you just need to click on this export button and voted very do guys, Adobe, what it will do. It will make all of its power to render your own video. Ok, it will spend more time to export your video. If you just select this q, what it happens guys? In the meantime. In the meantime, you can do the editing. If you want to do more editing, you just need to click on this queue button and it will do the rendering side-by-side. Okay? It where we can say that parallel processing, we can see that it will do the parallel processing, that you will get an advantage of doing some editing on your premium broke. But if you have selected as export, you cannot perform the editing. And within a small span of time, okay, with Smalls an offset time, it will contribute to your export, okay, all the powers to your export. I hope you get an idea that is how to do it. Okay, I'm not doing it because it would be sorta him Judas, need to click on this and you can do it. Okay? I hope you, they're done ideas, ideas, how to do them exporting part, okay, how to select an MP4 file. I hope you get an idea of it. Okay, L Then happy Premiere Pro. 33. Exporting for YouTube and other Specific Media in Adobe Premiere Pro: So here as we have seen in the previous video, how we can export it, okay, right now, I just need to give more detail about this media, okay? Because a lot of people are asking me a question that sir, indeed YouTube channel, or while they are exporting of video in a specific format, they are not encoded. You have seen that. If you have ever uploaded a video for YouTube, okay? They need some specifications. Okay, if it is matched, you can upload it successfully and you can publish it. But if they are not in their particular format, if they're unable to encode something, they will unable to recommend. They will tell you to applauded and they will show you an error. Okay? So how to make it guys, this is a very important days. Ok. So based upon that, Adobe will provide you a particular specification encoding which you can apply. Okay? You can, you can see these guys. You can make it a high-quality video, ok, for a particular. And you can see this guy is for a YouTube you can select as but if you want a YouTube to be 72 and TP CHD, ok. There is no encoding. As per the YouTube said, they will see the will detect all the encoding and they will do if you want faster uploading. Okay, basically, this is the most important recommendation for Premiere Pro, ok, large, a lot of my students are asking this question that sir, how we can remove some errors because VR exporting videos, ok, we have spent three days exclusively on making it, but still YouTube is not approving it. Ok, so make it simple guys had just present and what it will do guys, all the specified modification it will do or do, we will do. Okay, don't make it high-quality, just to make it a default setting and it will automatically get selected. Okay, I hope you get an idea of is and guys, for web devices and all, you can select and search as per the format that is recommended by your client. You can select it as per if you're ever in a Mac, QuickTime is good. Ok. Quick Time has got based upon that, okay, you can see, you can see this, how we need to encode if you are an apple gourd, okay, you can see this case. Ok, so this is basically a best way. But there is for universally accepted h, h 0.264 is a format that is acceptable for all the browsers, for everyone, for all the media player, this is a best. We can see that format which is universally acceptable. So that is why I have already told you that, makes sure that you have selected this order MP4, our setup, all your video files are, you can see that in this format, okay, you can see the AVI S will, but make sure that you have selected because this is universally acceptable, which your client can also see. You can see this guy is a four by mu. You can also do critter, okay, for mobile devices if you want. Okay, so there are various handoff options based upon your client requirement, based upon your specification. I hope you get an idea of is they'll then happy Premier Pro.